GB Preface This standard will replace the relevant contents of the resin in the GB Hygienic standard for polyvinyl chloride resi

Transcription

1 National Standard of the People s Republic of China GB National Food Safety Standard Plastic Resin for Food Contact (Unofficial translation) Issued on October 19, 2016 Implemented on April 19, 2017 Issued by National Health and Family Planning Commission of the People s Republic of China 1/21

2 GB Preface This standard will replace the relevant contents of the resin in the GB Hygienic standard for polyvinyl chloride resin used as food container and packaging material, GB Hygienic standard for polyethylene resin used as food packaging material, GB Hygienic standard for polystyrene resin used as food packaging material, GB Hygienic standard for polypropyrene resin used as food packaging material, GB Hygienic standard for polyethylene terephthalate resin used as food contailners and packaging materials, GB Hygienic standard for polycarbonate resin used as food containers and packaging materials, GB Hygienic standard of Vinylidene chloride-vinyl chloride copolymer resins for food containers and packaging material, GB Hygienic standard for unsaturated polyester resin and glass fibre reinforced plastics used as food containers and packaging materials, and of the plastic resin in the GB Hygienic standard of nylon 6 resins for food packaging material, and Announcement on the list of 107 Resins for food packing materials Such as poly(tetramethylene adipamide) (Original Announcement No.23 [2011] of the Ministry of Health). Compared with the above standards and announcement, the major modifications in this standard are as follows: --- The standard name is modified as National Food Safety Standard: Plastic Resin for Food Contact ; ---The scope of the standard is modified; ---The terms and definitions are added; ---The basic requirements are added; ---The requirements of raw materials are added; ---The physical chemical specifications are modified ---The general requirements of the migration test are added; ---The requirements of the label and identification are added. ---The appendix A is added 2/21

3 GB National Food Safety Standard Plastic Resin for Food Contact 1. Scope This standard is applicable to resins and mixtures of resins for use in plastic materials and articles for food contact, including unvulcanized thermoplastic elastomer resins and their blends. 2. Terminology and definition 2.1 Resin High molecular substances produced from synthetic polymersiation processes, such as (addition) polymerisation, condensation polymerisation, biological fermentation using relatively low molecular weight monomers and other stating materials as raw-materials, or chemical modifications of natural high molecular substances. 2.2 Mixtures of Resins Solid polymer materials that are homogenous continuous on macro level, produced by physical and/or chemical process of mixing of 2 or more polymers of same or different chemical structure, physical states. And each polymer can be used as resin material and main structural composition or phase of their products. These are also called polymer blends or polymer alloys. 3. Basic requirements The plastic resin for the food contact materials shall meet the provisions of GB Technical requirements 4.1 Requirements of raw materials The raw materials used in the food contact plastic resins should ensure that when the final article is used in the normal and expected conditions, human health is not endangered The resins allowed for use should meet the requirements of the Appendix A and relevant announcements. 4.2 Organoleptic Requirements The organoleptic shall meet the requirements of Table 1. 3/21

4 GB Table 1 Organoleptic Requirements Item Requirement Organoleptic Normal color and luster, Odorless, no dirt, etc Soak solution No obvious discoloration, turbidity, sedimentation and foreign odor in the soak solution resulted from migration test 4.3 Physical and chemical Specifications The physical and chemical specifications such as specific migration limit, total specific migration limit, maximum residual quantity for the monomer and other starting materials shall meet the provisions of the Appendix A and relevant announcements Additives The additives shall meet the requirements of the GB 9685 and the relevant announcements. 5 Miscellaneous 5.1 Migration test 5. The migration test shall be performed in accordance with the requirements of GB and GB Label and Identification Besides meeting the requirement of Label and Identification of GB , also should follow the Appendix A to show the resin name in product label, product leaflets or accompanying documents. Mixtures of resins should show all resin names Each party in supply chain shall ensure the transmission of the safety information and shall ensure the traceability on the relevant information of the harmful substances which may impact food safety. 4/21

5 GB Appendix A Plastic Resins allowed for use and Use Requirements A.1 Plastic Resins allowed for use and Use Requirements are specified in Table A.1. A.2 The total specific migration limit [SML(T)] and SML(T) grouping number in Appendix B of GB is applicable to this standard. 5/21

6 No. 中文名称 English CAS. No. 1 (3R)-3- 羟基丁酸与 4- 羟基丁酸共聚物 Butanoic acid, 3-hydroxy-, (3R)-, polymer with 4-hydroxybutanoic acid Poly(3HB-co- 4HB);P(3,4HB ) 5 mg/kg ( butanediol: 30 Plastic Materials & Articles produced cannot be used in contact with foods containing ethanol; exceed ,1,1,2,2,3,3- 七氟 -3- [( 三氟乙烯基 ) 氧 ] 丙烷与四氟乙烯的聚合物 1,12- 十二烷二酸与 1,6- 己二胺的聚合物 ( 聚十二烷二酰已二胺, 聚酰胺 612) Propane, 1,1,1,2,2,3,3-Heptafluoro -3- [(Trifluoroethenyl)oxy]-, polymer with Tetrafluoroethene 1,12-Dodecanedioic Acid, polymer with 1,6- Hexanediamine ( PA612) PFA 0.05 ( 四氟乙烯 : PA 2.4 (1,6- 己二胺 : 1,12- c Acid, polymer with 十二烷二酸与对苯二甲酸和 Butanediol and 1,12-Dodecanedioic Acid PBT 5 ( 丁二醇 : 丁二醇的聚合物 1,1- 二氯乙烯与丙烯酸甲酯的聚合物 Vinylidene Chloride copolymers with Methyl Acrylate PVDC 0.05 mg/kg (tetrafluoroethylene: 2.4 mg/kg (1,6- hexamethylene diamine monomer: 5 mg/kg ( butanediol: ND (1,1-dichloro ND (1,1- 二氯乙烯, ethylene: SML, DL=0.01mg/kg: 或 5( DL=0.01 mg/kg) OR 5 1,1- 二氯乙烯 :QM) mg/kg (1,1-dichloro ethylene: QM) 7.5( c Acid: 6 (calculated as acrylic acid) ,3,5- 三氧环己烷与 1,3- 二氧环戊烷的聚合物 1,3,5-Trioxane,polymerwith1,3-dioxolane ; POM 5 mg/kg (trioxane: 5 ( 三聚甲醛 : ; 5 (1,3-; 5 mg/kg (1,3- 二氧戊烷 : ;1 [ dioxolane: ; 1 双 (2,3- mg/kg ( bis (2,3- 环氧丙氧基 ) 丁烷, 以环 epoxy propoxy) 氧基团计 :QM] butane: QM, calculated as epoxy groups) exceed ,3- 丙二醇与对苯二甲酸的聚合物 8 1,3- 二氧杂环庚烷与 1,3,5- 三氧杂环己烷的聚合物 9 苯二甲酸与已二胺的聚合物 ( 聚酰胺 66T) c Acid, polymer with 1,3-Propanediol 1,3-Dioxepane, polymer with 1,3,5-trioxane POM Benzendicarboxylic acid,polymer with 1,6-hexanediamine and hexanedioic acid(polyamide 66T) PTT 0.05 (1,3- 丙二醇 : 5 ( 三聚甲醛 : ; 0.05 mg/6 dm² (1,3- 二氧杂环庚烷 : QM) PA 2.4 (1,6- 己二胺 : 0.05 mg/kg (1,3- propylene glycol: 5 mg/kg (trioxane: ;0.05 mg/6 dm² (1,3-dioxane heptane: QM) 2.4 mg/kg (1,6- hexanediamine: 7.5 ( c Acid) 15(calculated as Formaldehyde) 7.5( c Acid) exceed ,6- 二甲基苯酚与 2,3,6- 三甲基苯酚的聚合物 2,3,6- Trimethyl Phenol copolymer with 2,6- Dimethyl Phenolv PPE 0.05 (2,6- 二甲基苯酚 : 0.05 mg/kg (2,6- dimethyl phenol: 6/21

7 No. 中文名称 English CAS. No. 11 3,3,4,4,5,5,6,6,6- 九氟 -1- 己烯 乙烯 四氟乙烯的共聚物 Tetrafluoroethylene-Ethylene copolymer ETFE 0.05 ( 四氟乙烯 : 0.05 mg/kg (tetrafluoroethylene: 氯邻苯二甲酸酐与 1,3- 苯二铵 4- 氯邻苯二甲酸酐 邻苯二甲酸酐和 4,4 - 亚异丙基二苯酚 ( 双酚 A) 的聚合物 1,3-Isobenzofurandione, 4-Chloro-, polymer with 1,3-Benzenediamine, 5-Chloro -1, 3- Isobenzofurandione, 1,3- Isobenzofurandione and 4, 4 - (1- MethylEthylidene) Bis [Phenol] PEI 0.6 [4,4 - 亚异丙基二苯酚 ( 双酚 A): SML]; ND (1,3- 亚苯二胺, DL=0.01mg/kg:; 0.05 (4- 氯邻苯二甲酸酐, 以 4- 氯邻苯二甲酸计 :;0. 05(3- 氯邻苯二甲酸酐, 以氯邻苯二甲酸计 : 0.6 mg/kg (bisphenol A: ; ND (1,3- benzenediamine, DL=0.01 mg/kg: ; 0.05 mg/kg (5-chloro - 1,3-isobenzofurandione, calculated as 4- chlorobenzoate: ; 0.05 mg/kg (4-chloro - 1,3-isobenzofurandione, calculated as 3- chlorobenzoate: infant food 氯邻苯二甲酸酐与间苯二胺 4-1,3-Isobenzofurandione, 4-Chloro-, polymer 氯磷苯二甲酸酐和 4,4 -(1- with 1,3-Benzenediamine, 5-Chloro -1,3- 甲基乙基缩醛 ) 双酚的聚合物, Isobenzofurandione and 4,4 - (1- 以 4-(1- 甲基 -1- Methylethylidene) Bis [Phenol], 4- (1- Methyl 苯乙基 ) 苯酚 ( 对枯基苯酚 ) 为封 -1- Phenylethyl) Phenol-terminated 端剂 PEI 0.6 [4,4 - 亚异丙基二苯酚 ( 双酚 A): SML]; ND (1,3- 亚苯二胺,DL=0.01 mg/kg: ; 0.05 (4- 氯邻苯二甲酸酐, 以 4- 氯邻苯二甲酸计 :;0. 05 (3- 氯邻苯二甲酸酐, 以 3- 氯邻苯二甲酸计 :;0. 05 [4-(1- 甲基 -1- 苯乙基 ) 苯酚 ( 对枯基苯酚 ) :SML] 0.6 mg/kg (bisphenol A: ; ND (1,3- benzenediamine,dl=0. 01 mg/kg: ; 0.05 mg/kg (5-chloro -1,3 isobenzofuran-dione: ; 0.05 mg/kg (4- chloro -1,3- isobenzofuran-dione: ; 0.05 mg/kg (4- (1- methyl -1- phenylethyl) phenol: infant food. 14 4,4'-(4,4'- 异亚丙基二苯氧基 ) 双 ( 邻苯二甲酸酐 )( 双酚 A 二酐 ) 与 4,4'- 磺酰基双苯胺的聚合物 4,4'-[Isopropylidene bis (p-phenyleneoxy)] diphthalic dianhydrid / 4,4'-diaminodiphenyl sulfone copolymer PEI 0.05 ( 以双酚 A 二酐计 :; 5 ( 以 4,4'- 磺酰基双苯胺计 : 0.05 mg/kg (calculated as bisphenol A dianhydride:; 5 mg/kg (calculated as 4,4'-sulfonyl doubleaniline: 15 4,4'- 二氟二苯甲酮与苯二酚的聚合物 4,4'-Difluorobenzophenone, hydroquinone polymer PEEK 0.05 (4,4 - 二氟二苯甲酮 : ; 0.6 ( 对苯二酚 : 0.05 mg/kg (4,4 - difluoro benzophenone: ; 0.6 mg/kg (hydroquinone: 7/21

8 No. 中文名称 English CAS. No. 16 4,4'- 亚异丙基二苯酚 ( 双酚 A) 和 ( 氯甲基 ) 环氧乙烷的聚合物与甲基丙烯酸 顺丁烯二酸酐和甲苯二异氰酸酯的聚合物 4,4'-(1-Methylethylidene) Bisphenol polymer with Epoxy ethane (methyl chloride), polymer with methyl acrylic acid, maleic anhydride and toluene diisocyanate polymer - Epoxy resin ND [4,4'-(1- Methylethylidene) ND [4,4'- Bisphenol polymer with 亚异丙基二苯酚 ( 双酚 A) Epoxy ethane (methyl 与 ( 氯甲基 ) 环氧乙烷的聚 chloride),dl=0.01mg/ 合物,DL=0.01mg/kg:S kg:sml];0.6 [4,4'-(1- ML];0.6 [4,4-30(calculated as Methylethylidene) 亚异丙基二苯酚 ( 双酚 A): maleic Bisphenol: SML]; 1 3;23 SML]; 1 [4,4'- acid);6(calculated [4,4'-(1- ( 异亚丙基 ) 二苯酚 ( 双酚 A) as methacrylic acid) Methylethylidene) 和 ( 氯甲基 ) 环氧乙烷的聚 Bisphenol polymer with 合物 :QM];1 Epoxy ethane (methyl [ 甲苯二异氰酸酯 (2,4- chloride):qm];1 位与 2,6- 位的混合物 ):QM] [Toluene diisocyanate:qm] infant food. 17 4,4'- 亚异丙基二苯酚 ( 双酚 A) 与 1,1'- 磺酰基 - 双 (4- 氯苯 ) 的聚合物 Phenol, 4,4'-(1-Methylethylidene) Bis-, polymer with 1,1'-Sulfonyl Bis [4- Chlorobenzene] PSU 0.6 [4,4'- 亚异丙基二苯酚 ( 双酚 A): SML];0.05 [1,1'- 磺酰基二 (4- 氯苯 ):SML] 0.6 mg/kg (bisphenol A: ; 0.05 mg/kg (1,1'- sulfonyl bis (4- chlorophenyl: Use temp not to exceed 121 ; Not for use in production of Materials and Article for contact with infant food. 18 4,4'- 亚异丙基二苯酚 ( 双酚 A) 与碳酰二氯或碳酸二苯酯的聚合物 Carbonic dichloride, or diphenyl carbonate, polymer with 4,4'-(1-Methylethylidene) Bisphenol - PC 0.6 [4,4'- 亚异丙基二苯酚 ( 双酚 A): SML];0.05( 游离酚, 蒸馏水回流,6h: 0.6 mg/kg (bisphenol A: ; 0.05(free phenol,distilled Water at reflux temperature for 6 hours: infant food. Plastic Materials & Articles produced cannot be used in contact with foods containing more than 20% ethanol;.other requirements refer to note ,4'- 联苯二酚与 1,1'- 磺酰双 (4- 氯苯 ) 的聚合物 [1,1'-Biphenyl]-4,4'- Diol, polymer with 1,1'- Sulfonyl Bis [4-Chlorobenzene] ; PPSU 6 mg/kg ( (1,1'- 6(4,4'- biphenyl)-4,4'-diol: 联苯二酚 :;0.05 [1,1 - ; 0.05 mg/kg (1,1 - 磺酰基二 (4- 氯苯 ): SML] sulfonyl bis (4- chlorophenyl): 8/21

9 No. 中文名称 English CAS. No 甲基 -1- 戊烯与乙烯的聚合物 1-Pentene, 4-Methyl-, polymer with Ethene PMP 0.05(4- 甲基 -1- 戊烯 : 0.05 mg/kg (4-methyl - 1- pentene: 21 5,5'-[(1- 甲基亚乙基 ) 双 (4,1- 亚苯氧基 )] 双 ( 邻苯二甲酸酐 ) 与 1,3- 亚苯二胺的聚合物 1,3-isobenzofurandione, 5,5'[(1-methylethylidene)bis(4,1-phenyleneoxy)] bispolymer with 1,3-benzenediamine PEI 0.6(4,4'- 亚异丙基二苯酚 ( 双酚 A): ;ND(1,3- 亚苯二胺,DL=0.01mg/k g: 0.6 mg/kg bisphenol A: ; ND (1,3- benzenediamine, DL=0.01 mg/kg: infant food ( 乙酰氧基 )-2- 萘甲酸与 4- ( 乙酰氧基 ) 苯甲酸的聚合物 2-Naphthalenecarboxylic Acid, 6-(Acetyloxy) LCP, polymer with 4-(Acetyloxy) Benzoic Acid 0.05(6- 羟基 -2- 萘甲酸 :;6(4,4'- 二羟基联苯 :; 0.05 [N-(4- 羟基苯基 ) 乙酰胺 :SML] 0.05 mg/kg (6-hydroxy - 2- naphthoic acid: ;6 mg/kg (4,4'- dihydroxybiphenyl: ; 0.05 mg/kg (N- (4-hydroxyphenyl) acetamide: No contact with foods containing more than 8% alcohol, and solid food containing fat on the surface Copolymer of Styrene homopolymer and 23 苯乙烯均聚物及与丁二烯共聚物 butadiene - PS ND( 丁二烯,DL=0.01mg/ kg: 或 1( 丁二烯 :QM); 0.3%( 乙苯 :QM);0.5%( 苯乙烯 :QM) ND(butadiene,DL=0.01 mg/kg: OR 1mg/kg(butadiene:QM) ; 0.3%(ethylbenzene:Q M);0.5%(styrene:QM) refer to note 2 24 苯乙烯与以下单体的聚合物 :2- 甲基 -1,3- 丁二烯 丁二烯 Benzene, polymer with the following monomers: 2-Methyl -1,3- Butadiene; 1,3- Butadiene; ; PS ND (isoprene: SML, ND(2- 甲基 -1,3- DL=0.01 mg/kg) ; 1 丁二烯,DL=0.01mg/kg: mg/kg (isoprene: QM); ;1(2- 甲基 -1,3- ND (1,3-butadiene, 丁二烯 :QM);ND( 丁二烯 DL=0.01 mg/kg:,dl=0.01mg/kg: 或 OR 1 mg/kg(1,3-1( 丁二烯 :QM) butadiene:qm) 25 丙烯腈 - 苯乙烯共聚物 Acrylonitrile-styrene copolymer AS ND( 丙烯腈,DL=0.01mg/k ND(Acrylonitrile,DL=0. 01mg/kg: 26 丙烯腈 - 丁二烯 - 苯乙烯 Acrylonitrile-butadiene-styrene - ABS ND( 丙烯腈,DL=0.01mg/ kg:;nd( 丁二烯,DL =0.01mg/kg: 或 1( 丁二烯 :QM) ND(Acrylonitrile,DL=0. 01mg/kg:;ND(but adiene,dl=0.01mg/kg: OR1mg/kg(butadiene: QM) 27 丙烯酸丁酯与甲基丙烯酸丁酯 甲基丙烯酸 -2- ( 二甲氨基 ) 乙酯和甲基丙烯酸甲酯的聚合物 2-Propenoic acid, 2-methyl-, butyl ester, polymer with butyl 2-propenoate, 2- (dimethylamino)ethyl 2-methyl-2-propenoate and methyl 2-methyl-2-propenoate PMMA 0.02( 以甲基丙烯酸 ( 二甲氨基 ) 乙酯计 : 0.02 mg/kg (2- methacrylic acid -2- (dimethyl amino) ethyl - 2 (ol) ester: acrylic 22;23 acid);6(calculated as methacrylic acid) 9/21

10 No. 中文名称 English CAS. No. 28 丙烯酸甲酯与丁二烯和丙烯腈的聚合物 2-Propenoic Acid, Methyl Ester, polymer with 1,3-Butadiene and 2-Propenenitrile PAN ND( 丙烯腈,DL=0.01mg/ kg:;nd( 丁二烯,DL =0.01mg/kg: 或 1( 丁二烯 :QM) ND (2-acrylonitrile: SML, DL=0.01 mg/kg); ND (1,3- butadiene, DL=0.01 mg/kg: OR 1 mg/kg (1,3- butadiene: QM) acrylic acid) 丙烯与以下一种或多种单体的聚合物 ( 其中丙烯占最大质量分数 ): 顺丁烯二酸酐 乙烯 1- 丁烯 其它 α- 烯烃, 可含 5- 亚乙基 -2- 降冰片烯作 Modified 单体 Copolymers consisting of propylene and one or more of the following comonomers (propylene accounting for the largest proportion): 2,5-Furandione; Ethylene; 1- Butene; other α-olefins; may contain 5- Ethylidine -2- norbornene ; ; ; ; PP 0.05(5- 亚乙基 -2- 降冰片烯 : 0.05 (5-ethylidene -2- norbornene: 30(calculated as maleic acid) 3 when no migration test applicable to 5- ethylidene -2- norbornene, use 0.05 mg/6 dm2 (QM) as restriction limit; plastic materials and articles containing 5- ethylidene -2- norbornene, the radio of contact area per food weight should not be greater than 2 dm2/kg. 30 丙稀酸甲酯与 1,1- 二氯乙烯和丙烯腈的聚合物 2-Propenoic Acid, Methyl Ester, polymer with 1,1-Dichloroethene and 2-Propenenitrile PVDC ND (1,1-dichloro ND(1,1- ethylene, DL=0.05 二氯乙烯,DL=0.01mg/k mg/kg: OR 5 g: 或 5(1,1- mg/kg (1,1-dichloro acrylic acid) 二氯乙烯 :QM);ND( 丙烯 ethylene: QM) ; 腈,DL=0.01mg/kg: ND(acrylonitrile,DL=0.0 1mg/kg: 不饱和聚酯树脂 unsaturated polyester resin - UP 0.2% ( 树脂模板, 苯乙烯 : QM) 0.2% (resin plate, Styrene: QM) 32 对苯二甲酸, 丁二醇, 反丁烯二酸, 乙二醇, 己二酸聚合物与苯乙烯 - 丁二酸一甲酯聚合物的接枝共聚物 Terephthalic acid, 1, 4-butanediol, fumaric acid, ethylene glycol and adipic acid polymer and methyl styrene-succinic acid polymer grafted copolymer - Modified PBT 30(calculated as ethylene glycol);7.5(calculate d as 2;28;30 c Acid);5(calculated as Butanediol) Only for use in contact with food containing oil 10/21

11 No. 中文名称 English CAS. No. 33 对苯二甲酸二甲酯与 丁二醇 癸二酸和六亚甲基二异氰酸酯的聚合物 Benzene Dicarboxylic Acid, (Dimethyl Ester), polymer with Butanediol, Sebacic - Acid and Hexamethylene Diisocyanate PBT (Biodegrable type) 以异氰酸根计 1( 六亚甲基二异氰酸酯, :QM) 1 mg/kg (1,6- diisocyano-acyl hexane, calculated as isocyano: QM) 7.5(calculated as c Acid); 5(calculated as Butanediol) 28;30 exceed 对苯二甲酸二甲酯与 丁二醇 己二酸和六亚甲基二异氰酸酯的聚合物 Benzene Dicarboxylic Acid, (Dimethyl Ester), polymer with Butanediol, Adipic Acid and Hexamethylene Diisocyanate - PBT (Biodegrable type) 以异氰酸根计 1( 六亚甲基二异氰酸酯, :QM) 1 mg/kg (1,6- diisocyano-acyl hexane, calculated as isocyano: QM) 7.5(calculated as c Acid); 5(calculated as Butanediol) 28;30 exceed c Acid, Dimethyl 对苯二甲酸二甲酯和 Ester, polymer with 环己烷二甲醇,2,2,4,4- 四甲基 - CycloHexaneDimethanol and 2,2,4,4-1,3- 环丁二醇的聚合物 TetraMethyl -1,3- CycloButanediol 对苯二甲酸二甲酯和 2,2,4( 或 2, 4,4)- 三甲基 -1,6- 己二胺的聚合物 对苯二甲酸二甲酯与 1,3- 丙二醇的聚合物 c Acid, Dimethyl Ester, polymer with 2,2,4 (or 2,4,4)- Trimethyl-1,6-Hexanediamine c Acid, Dimethyl ester, polymer with 1,3-Propanediol Modified PCT 5(2,2,4,4- 四甲基 -1,3- 环丁二醇 : ; PA 5mg/6 dm² ( 青霉胺 :QM) PTT 0.05(1,3- 丙二醇 : 5.0 mg/kg (2,2,4,4- tetramethyl -1,3- central butanediol: 5.0 mg/6 dm² (penicillamine: QM) 0.05mg/kg( 1,3- Propanediol: 7.5(calculated as c Acid) 28 exceed 100 exceed 对苯二甲酸二甲酯与 丁二醇 甲基环氧乙烷和环氧乙烷的聚合物 ( 聚酯弹性体 ) Poly (Benzene Dicarboxylic Acid Dimethyl Ester, Butanediol, Ethylene Oxide, Propylene Oxide) TPC-ET 0.9 g/dm² ( 对苯二甲酸二甲酯与 丁二醇 甲基环氧乙烷和环氧乙烷的聚合物 :QM); 1( 环氧乙烷 :QM); ND( 环氧乙烷,SML,DL =0.01mg/kg);1( 甲基环氧乙烷 : QM) 0.9 g/dm2 (polymers of dimethyl benzene dicarboxylate with butanediol, methyl ethylene oxide and ethylene oxide: QM); 5 mg/kg (butanediol: ; 1 mg/kg (ethylene oxide: QM); 1 mg/kg (methyl ethylene oxide: QM) 5(calculated as Butanediol) 对苯二甲酸二甲酯与 丁二醇的聚合物 ; 对苯二甲酸与 丁二醇的聚合物 Polybutylene Terephthalate, Poly (oxy - butanediyloxy carbonyl - phenylene carbonyl); Benzene dicarboxylic acid, dimethyl ester, polymer with butanediol) ; PBT 7.5(calculated as c Acid); 5(calculated as Butanediol) 28;30 exceed /21

12 No. 中文名称 English CAS. No. 40 对苯二甲酸二甲酯与 丁二醇和 α- 氢 -ω- 羟基聚 ( 丁二醇 ) 的聚合物 ( 聚酯弹性体 ) Benzene Dicarboxylic Acid Dimethyl Ester, polymer with Butanediol, α-hydro TPC-ET ω- Hydroxy Poly (Butanediol) (Polyester Elastomers) 0.6( 四氢呋喃 :;5( 以偏苯三酸和偏苯三酸酐之和计 :QM) 0.6 mg/kg (tetrahydrofuran: ; 5 mg/kg (calculate as sum of trimellitic acid and trimellitic anhydride:qm) 7.5(calculated as c Acid); 5(calculated as Butanediol) 28;30 Not foods containing more than 8% alcohol; Use temp not to exceed c Acid, Dimethyl 对苯二甲酸二甲酯与 Ester, polymer with Butanediol and α- 丁二醇和 α- 氢 -ω- 羟基聚 ( 氧 - Hydro -ω- Hydroxy Poly (Oxy- 丁烷二基 ) 的聚合物 Butanediyl) Modified PBT thermoplastic elastomer (TPE) 0.05( 四氢呋喃 : 0.05 mg/kg (tetrahydrofuran: 5(calculated as Butanediol) 30 when used as polyester elastomers, only for use in contact with dry solid foods 42 对苯二甲酸与 [1,1'- 联苯 ]-4,4'- c Acid, polymer with 二醇 4- 羟基苯甲酸 6- 羟基 -2- [1,1-biphenyl]-4, 4-diol, 4-Hydroxybenzoic 萘甲酸和 N-(4- Acid and 6-Hydroxy -2- Naphthalene 羟基苯基 ) 乙酰胺 乙酸盐和钾 Carboxylic Acid, Acetate, Potassium Salt 盐的聚合物 LCP 0.05(6- 羟基 -2- 萘甲酸 :; 6(4,4'- 二羟基联苯 :; 0.05 [N- (4- 羟基苯基 ) 乙酰胺 :SML] 0.05 mg/kg (6-hydroxy - 2- naphthoic acid: 7.5(calculated as ; 6 mg/kg (4,4'- dihydroxybiphenyl: ; 0.05 mg/kg (Nc Acid) (4-hydroxyphenyl) acetamide: 28 Not foods containing more than 8% alcohol, and solid food containing fat on the surface 对苯二甲酸与 1,6- 己二胺 (1:1) 的聚合物与己内酰胺的聚合物 对叔丁基苯酚封端的聚 ( 碳酸 - 4,4'- 亚异丙基二苯酯 ) 二甘醇 - 间苯二甲酸 Modified 的聚对苯二甲酸乙二醇酯共聚物 ; 由对苯二甲酸二甲酯或对苯二甲酸和乙二醇与以下物质缩合 : 间苯二甲酸二甲酯 间苯二甲酸和二甘醇 反式 - 环己二甲酸二甲酯与 环己二甲醇的聚合物 c Acid compound with 1,6-Hexanediamine (1:1), polymer with Hexahydro -2H- azepin -2- one Carbonic Dichloride, polymer with 4,4'- (1- MethylEthylidene) Bis (Phenol), 4- (1,1- Dimethylethyl) Phenyl Ester Polyethylene Terephthalate Copolyesters (Diethylene Glycol-Isophthalate Modified), prepared by the condensation of Dimethyl Terephthalate or Terephthalic Acid and Ethylene Glycol with one or more of the following: Dimethyl Isophthalate, Isophthalic Acid, and Diethylene Glycol Cyclohexane Dicarboxylic Acid, Dimethyl Ester, trans-, polymer with Cyclohexane Dimethanol PA 2.4(1,6- 己二胺 : PC ; ; ; PET PCCD 47 环己酮与甲醛的聚合物 Formaldehyde, polymer with cyclohexanone POM 2.4 mg/kg (1,6- Hexanediamine: 0.6 mg/kg (4,4'- (1- methylethylidene) 0.6 [4,4 - Bisphenol: ; 0.05 亚异丙基二苯酚 ( 双酚 A): mg/kg (4-cumyl SML];0.05( 对叔丁基苯酚 : phenol:: ; 1 ; 1( 碳酰二氯 :QM) mg/kg (carbonic dichloride: QM) 0.04( 以锑计 : 0.04 mg/kg (calculated as antimony) 15(calculated as caprolactam);7.5(ca lculated as 4;28 c Acid) 30(calculated as ethylene glycol);5(calculated as 2;27;28 Isophthalate);7.5(ca lculated as c Acid) 15(calculated as formaldehyde) 15 infant food. 12/21

13 No. 中文名称 English CAS. No. Hexanedioic Acid, polymer with 48 己二酸和己二胺的聚合物 ( 聚酰胺 hexanediamine(polyamide 66) PA 2.4(1,6- 己二胺 : 2.4mg/kg (1,6- hexanediamine: 49 己二酸与 Hexanedioic Acid, polymer with 丁二醇 六亚甲基二异氰酸酯 Butanediol, 1,6-DiIsocyanatoHexane, 2,2-1,6- 己二醇和 2,2- 二甲基 -1,3- Dimethyl -1,3- Propanediol (<2%) and 1,6- 丙二醇 (<2%) 的聚合物 Hexanediol PUR 0.05(2,2- 二甲基 -1,3- 丙二醇 :;0.05(1,6- 己二醇 :;1( 六亚甲基二异氰酸酯, 以异氰酸根计 :QM) 0.05 mg/kg (2,2- dimethyl -1,3- propanediol: ; 0.05 mg/kg (1,6- hexanediol: ; 1 mg/kg (hexamethylene diisocyanate: QM) 5(calculated as Butanediol) 30 exceed 己二酸与 丁二醇和六亚甲基二异氰酸酯的聚合物 Hexanedioic Acid, polymer with Butandiol and 1,6-DiIsocyanatoHexane PUR 1( 六亚甲基二异氰酸酯, 以异氰酸根计 :QM) 1 mg/kg, (hexamethylene diisocyanate: QM, calculated as isocyano) 5(calculated as Butanediol) 30 exceed 己二酸与己内酰胺 1,6- 己二胺和 4,4'- 亚甲基二 ( 环己胺 ) 的聚合物 Hexanedioic Acid, polymer with Hexahydro - 2H- azepin -2- one, bis (4-Aminocyclohexyl) Methane and 1,6-Hexanediamine PA 2.4(1,6- 己二胺 :;0.05(4,4'- 亚基双环己胺 : 2.4 mg/kg (1,6- hexanediamine: ; 15(calculated as 0.05 mg/kg (4,4'- caprolactam) subunit bicyclo cyclohexylamine: 4 52 己二酸与间苯二甲胺的聚合物 Hexanedioic Acid, polymer with m- Xylylenediamine PA 0.05( 间苯二甲胺 : 0.05 mg/kg (1,3-xylylene amine: 53 己内酰胺与亚胺基六次甲基亚胺基己二酰的聚合物 Hexanedioic Acid, polymer with Hexahydro - 2H- azepin -2- one and 1,6-Hexanediamine PA 2.4(1,6- 己二胺 : 2.4 mg/kg (1,6- hexanediamine: 15(calculated as caprolactam) 4 54 甲基丙烯酸 ( 二甲氨基 ) 乙酯与甲基丙烯酸甲酯的聚合物 2-Propenoic acid, 2-methyl-, 2- (dimethylamino)ethyl ester, polymer with methyl 2-methyl-2-propenoate PMMA 0.02 [ 甲基丙烯酸 ( 二甲氨基 ) 乙酯 :SML] 0.02 mg/kg (2- methyl - 2- acrylic acid -2- (dimethylamino) ethyl ester: methacrylic acid) 甲基丙烯酸 丙烯酸乙酯 甲基丙烯酸甲酯的共聚物 2-Propenoic acid, 2-methyl-, polymer with ethyl 2-propenoate and methyl 2-methyl-2- propenoate PMMA acrylic 22;23 acid);6(calculated as methacrylic acid) 56 甲基丙烯酸丁酯与甲基丙烯酸甲酯和甲基丙烯酸羟丙酯的聚合物 2-Propenoic acid, 2-methyl-, butyl ester, polymer with methyl 2-methyl-2-propenoate and 1,2-propanediol mono(2-methyl-2- propenoate) PMMA methacrylic acid) 甲基丙烯酸丁酯与甲基丙烯酸羟乙酯, 甲基丙烯酸甲酯和甲基丙烯酰胺的聚合物 2-Propenoic acid, 2-methyl-, butyl ester, polymer with 2-hydroxyethyl 2-methyl- 2- propenoate, methyl 2-methyl-2-propenoate and 2-methyl-2-propenamide PMMA ND( 甲基丙烯酰胺,DL=0.01mg/kg: ND (methacrylamide, DL=0.01 mg/kg: methacrylic acid) 23 13/21

14 No. 中文名称 English CAS. No. 58 甲基丙烯酸丁酯与乙烯 甲基丙烯酸甲酯和丙烯的聚合物 2-Propenoic Acid, 2-methyl-, butyl ester, polymer with ethene, methyl 2-methyl-2- propenoate and 1-propene PMMA methacrylic acid) 甲基丙烯酸甲酯与苯乙烯和顺丁烯二酸酐的聚合物 2-Propenoic acid, 2-methyl-, methyl ester, polymer with ethenylbenzene and 2,5- furandione PMMA 30(calculated as maleic 3;23 acid);6(calculated as methacrylic acid) 60 甲基丙烯酸甲酯与丙烯酸乙酯的共聚物 2-Propenoic acid, 2-methyl-, methyl ester,polymer with ethyl 2-propenoate PMMA acrylic 22;23 acid);6(calculated as methacrylic acid) 61 甲基丙烯酸甲酯与丁二烯 ; 苯乙烯和丙烯腈的共聚物 Copolymers of Methyl Methacrylate, 2- Acrylonitrile, 1,3-Butadiene and Styrene ABS ND( 丙烯腈,DL=0.01mg/ kg:;nd( 丁二烯,DL =0.01mg/kg: 或 1( 丁二烯 :QM) ND (2- acrylonitrile, DL= 0.01 mg/kg: ;ND (1,3- butadiene, DL=0.01mg/kg: OR 1 mg/kg (1,3- butadiene: QM) methacrylic acid) 甲基丙烯酸乙酯与丙烯酸甲酯的聚合物 2-Propenoic acid, 2-methyl-, ethyl ester, polymer with methyl 2-propenoate PMMA acrylic 22;23 acid);6(calculated as methacrylic acid) 63 甲基丙烯酸与甲基丙烯酸丁酯和甲基丙烯酸甲酯的聚合物 2-Propenoic acid, 2-methyl-, polymer with butyl 2-methyl-2-propenoate and methyl 2- methyl-2-propenoate PMMA methacrylic acid) 甲基丙烯酸与甲基丙烯酸甲脂的聚合物 2-Propenoic acid, 2-methyl-, butyl ester, polymer with methyl 2-methyl-2-propenoate PMMA methacrylic acid) 甲基丙烯酸与甲基丙烯酸甲酯和丙烯酸甲酯的聚合物 2-Propenoic Acid, 2-Methyl-, polymer with Methyl 2-Methyl -2- Propenoate and Methyl 2-Propenoate PAAM acrylic 22;23 acid);6(calculated as methacrylic acid) 66 间苯二甲酸二甲酯与 丁二醇 ; 对苯二甲酸和聚 ( 丁二醇 ) 的聚合物 1,3-Benzene Dicarboxylic Acid, Dimethylester, polymer with Butanediol, Dimethyl Benzene Dicarboxylate and α- Hydro-ω-Hydroxy Poly (Oxy - Butanediyl) PBT 7.5(calculated as c Acid);5(calculated as Butanediol) 28;30 exceed /21

15 No. 中文名称 English CAS. No. 67 间苯二甲酸二甲酯与 丁二醇 ; 对苯二甲酸和聚 ( 丁二醇 ) 的聚合物 ( 聚酯弹性体 ) 1,3-Benzene Dicarboxylic Acid Dimethyl Ester, polymer with Butanediol, Benzene Dicarboxylic Acid, Poly ( Butanediol); (Polyester Elastomers) TPC-ET 0.6( 四氢呋喃 : 0.6 mg/kg (tetrahydrofuran: 7.5(calculated as c Acid);5(calculated as Butanediol) 28;30 Only for use with dry solid without oil on surface 68 间苯二甲酸与对苯二甲酸和 1,6- PA 6T / 6I PA 2.4(1,6- 己二胺 : 己二胺的聚合物 2.4 mg/kg (hexamethylene diamine: 5(calculated as Isophthalate);7.5(ca lculated as 27;28 c Acid) 间苯二甲酰氯与对苯二甲酰氯 ; 间苯二酚 ; 碳酰二氯 ;4,4'- 1,3-Benzenedicarbonyl Dichloride, polymer with Benzene Dicarbonyl Dichloride, 1,3-69 亚异丙基二苯酚 ( 双酚 A) 和二 [4- Benzenediol, Carbonic Dichloride and 4,4'-( PC (1- 甲基 -1- 苯基乙基 ) 苯基 ] 酯的聚合物 Methylenthylidene) bis [Phenol], 4-(1- Phenyl Ethyl) Phenyl Ester 0.6[4,4'- 亚异丙基二苯酚 ( 双酚 A:] ;0.05 [4-(1- 甲基 -1- 苯乙烯 ) 苯酚 ( 对枯基苯酚 ) :SML]; 2.4 ( 间苯二酚 : ;1( 碳酰二氯 :QM) 0.6 mg/kg (bisphenol A: ;0.05 mg/kg (4- cumyl phenol: ; 2.4 mg/kg (1,3- benzenediol: ; 1 mg/kg (carbonic dichloride: QM) 5(calculated as Isophthalate);7.5(ca lculated as 27;28 c Acid) infant food. 70 间苯二甲酰氯与对苯二甲酰氯 ; 碳酰二氯和 4,4'- 亚异丙基二苯酚 ( 双酚 A) 的聚合物 1,3-Benzene Dicarbonyl Dichloride, polymer with BenzeneDicarbonyl Dichloride, Carbonic Dichloride and 4,4'-(1- Methylethylidene) Bisphenol PC 0.6[4,4'- 亚异丙基二苯酚 ( 双酚 A:] ;1( 碳酰二氯 :QM) 5(calculated as 0.6 mg/kg (bisphenol Isophthalate);7.5(ca A, ; 1 mg/kg (QM, lculated as 27;28 calculated as carbonic dichloride) c Acid) infant food. 71 间苯二甲酰氯与对苯二甲酰氯 ; 碳酰二氯 ;4,4'- 亚异丙基二苯酚 ( 双酚 A);4-(1- 甲基 -1- 苯乙基 ) 苯酚 ( 对枯基苯酚 ) 和二 [ 4-(1- 甲基 -1- 苯基乙基 ) 苯基 ] 酯的聚合物 1,3-Benzene Dicarbonyl Dichloride, polymer with Benzene Dicarbonyl Dichloride, Carbonic Dichloride, 4,4'-(1- MethylEthylidene) Bis [Phenol], Bis [4-(1- methyl -1- Phenyl Ethyl) Phenyl] Ester and 4- Cumyl Phenol PC 0.6[4,4'- 亚异丙基二苯酚 ( 双酚 A:] ;0.05 [4-(1- 甲基 mg/kg (bisphenol A, ;0.05mg/kg (4- cumyl phenol: ;1 5(calculated as Isophthalate);7.5(ca lculated as 27;28 苯乙烯 ) 苯酚 ( 对枯基苯酚 ) mg/kg (QM, calculated :SML];1( 碳酰二氯 :QM) as carbonic dichloride) c Acid) infant food. 72 聚 ( 硫 - 亚苯基 ); 聚苯硫醚 Benzene, Dichloro-, polymer with Sodium Sulfide ; PPS 12( 二氯苯 : 12 mg/kg ( dichlorobenzene: exceed 聚 1- 丁烯 Polybutene PB-1 74 聚丙烯 ( 丙烯均聚物 ) Polypropylene (propylene homopolymer) - PP Refer to note 3 75 聚丁二酸丁二醇酯 Poly (Butylene Succinate) PBS;PBSU 5(calculated as 30 Butanediol) exceed /21

16 No. 中文名称 English CAS. No. 76 聚对苯二甲酸丁二醇酯 ; 聚 ( 氧代 - Poly (Oxy - Butanediyloxycarbonyl - 亚丁基氧基羰基 - Phenylenecarbonyl) 亚苯基羰基 ) PBT 7.5(calculated as c Acid);5(calculated as Butanediol) 28;30 77 聚对苯二甲酸丁二醇酯 - 聚四氢呋喃醚的嵌段共聚物与顺丁烯二酸酐的聚合物 Polybutylene Terephthalate- Polytetramethylene Glycol block copolymer, reaction products with Maleic Anhydride PBT 0.6( 四氢呋喃 : 0.6 mg/kg (tetrahydrofuran: 30(calculated as maleic acid);5(calculated as Butanediol) 3;30 exceed 聚对苯二甲酸 己二酸丁二醇酯 Poly (Butylene Adipate Terephthalate) PBAT 7.5(calculated as c Acid);5(calculated as Butanediol) 28;30 exceed 100, Cannot be used for frozen or chilled foods. 79 聚对苯二甲酸乙二醇酯树脂 Polyethylene terephthalate - PET 0.04( 以锑计 : 0.04 mg/kg (calculated as antimony: 30(calculated as ethylene glycol);7.5(calculate 2;28 Refer to note 4 d as c Acid) 80 聚己二酰丁二胺 ( 聚酰胺 46) Hexanedioic Acid, polymer with Butanediamine ; PA 81 聚己内酰胺 ( 聚酰胺 6) polycaprolactam(polyamide 6) PA 15(calculated as caprolactam) 4 82 聚甲基丙烯酸甲酯 2-Propenoic acid, 2-methyl-, methyl ester, homopolymer PMMA methacrylic acid) 聚甲醛 Polyoxymethylene ; POM 15(calculated as formaldehyde) 15 exceed 聚氯乙烯 Polyvinyl chloride - PVC ND( 氯乙烯,DL=0.01mg/ kg: 或 1( 氯乙烯 :QM); ND(1-1 二氯乙烷,DL=0.01mg/ kg: 或 5(1-1 二氯乙烷 :QM) ND(Vinyl Chloride,DL=0.01mg/ kg:or1mg/kg(vin yl Chloride:QM);ND(1,2- Dichloroethane,DL=0.01mg/kg:OR 5mg/kg(1,2- Dichloroethane :QM) 16/21

17 No. 中文名称 English CAS. No. 85 聚全氟乙烯 - 丙烯树脂 ; 四氟乙烯与六氟丙烯共聚物 Polytetrafluoroethylene-propylene resin; tetrafluoroethylene polymer with hexafluoropropylene FEP 86 聚乳酸 Polylactide PLA 87 聚四氟乙烯 ( 四氟乙烯均聚物 ) Polytetrafluoroethylene(Tetrafluoroethylene homopolymer) 0.05 (; 四氟乙烯 ; ; 0.01( 六氟丙烯 ; PTFE 0.05( 四氟乙烯 : 0.05mg/Kg (tetrafluoroethylene; ; 0.01 (hexafluoropropylene; 0.05 mg/kg (tetrafluoroethylene: exceed 100 exceed 聚酰胺 12 Polylaurolactam PA 5( 月桂内酰胺 : 5 mg/kg (azaheterocyclic tridecane -2- ketone: 89 聚酰胺 610 Polyamide ; ; PA 2.4 (1, 6- 己二胺 : 2.4 mg/kg (1,6- hexanediamine: 90 聚氧化 (2,6- 二甲基 - 亚苯基 ) 树脂 Poly (2,6- Dimethyl - Phenylene Oxide) PPE 0.05 (2,6- 二甲基苯酚 :: 0.05 mg/kg (2,6-dimethyl phenol: 91 聚乙烯 ( 乙烯均聚物 ) polyethylene(ethylene homopolymer) - PE Refer to note 5 92 偏氯乙烯 - 氯乙烯共聚物 vinylidene chloride-vinyl chloride coplomer PVDC ND(vinylidene ND(1- chloride,dl=0.01mg/ 1 二氯乙烯,DL=0.01mg/ kg:or kg: 或 5(1-5mg/kg(vinylidene 1 二氯乙烯 :QM);ND( 氯乙 chloride:qm);nd(vinyl 烯,DL=0.01mg/kg: chloride,dl=0.01mg/ 或 1( 氯乙烯 :QM) kg:or1mg/kg(vin yl chloride:qm) 17/21

18 No. 中文名称 English CAS. No. 93 氢化的芳香族石油碳氢树脂 Distillates (Petroleum), Heavy Thermal Cracked, polymerized., hydrogenated hydrogenated petroleum hydrocarbon resins Hydrogenated Petroleum Resins (or hydrocarbon Resin), is polymerized of aliphatic-, alicyclicand/or singlebenzene aromaticalkene, diene, and dilute monomers, derived from thermal cracked petroleum dilutes with boiling range no higher than 220 C, through the process of catalytic or thermal polymerization, and distillation, hydrogenation and other processes. Properties: Above 120 C, viscosity > 3 Pa.s Softening Temp. > 95 C Bromine Value: < 三聚氰胺甲醛树脂 melamine-formaldehyde resin - MF 2.5( 三聚氰胺 : 2.5mg/kg(melamine:S ML) 15(calculated as formaldehyde) 15 When used for materials and articles for contact with infant food, specific migration limit of melamine is 1 mg/kg ; materials and articles produced shall not be used for microwave use. 18/21

19 No. 中文名称 English CAS. No. 碳酰二氯与 4,4'- 环己亚基双 (2- Carbonic Dichloride, polymer with 4,4'- 甲基苯酚 );4,4'- 亚异丙基二苯酚 Cyclohexylidene Bis (2-MethylPhenol) and PC ( 双酚 A) 和二 [4-(1- 甲基 -1-4,4'-(1-Methylethylidene) Bis (Phenol), Bis [4- 苯基乙基 ) 苯基 ] 酯的聚合物 (1-methyl -1- Phenyl Ethyl) Phenyl] Ester 0.6[4,4'- 亚异丙基二苯酚 ( 双酚 A):SML];1( 碳酰二氯 :QM) 0.6 mg/kg (bisphenol A: ; 1 mg/kg (carbonic dichloride: QM) infant food. 96 五氟乙基三氟乙烯基醚与四氟乙烯的聚合物 Ethene, tetrafluoro-, polymer with trifluoro (pentafluoroethoxy) ethene PFA 0.05 ( 四氟乙烯 : 0.05 mg/kg (tetrafluoroethylene: 97 ( 氧化 - 苯烯基硫化 - 苯烯基 ) 聚合物 ;4,4 - 磺酰基二苯酚 ( 双酚 S) 与 1,1 - 磺酰基二 (4- 氯苯 ) 的聚合物 Poly(oxy-p-phenylenesulfonyl-p-phenylene) resin Phenol, 4,4'-sulfonylbis-, polymer with 1,1'-sulfonylbis[4-chlorobenzene]) ; PESU 0.05(4,4 - 磺酰基二苯酚 ( 双酚 S):SM L); 0.05(4,4 - 二氯二苯砜 : 0.05 mg/kg (4,4 - sulfonyl hydroquinone: ; 0.05 mg/kg (1,1 - sulfonyl bis (4- chlorophenyl): 98 乙烯醇均聚物 ( 聚乙烯醇 ) Vunyl Alocohol homopolymer (Polyvinyl Alcohol) PVA or PVOH 12( 乙酸乙烯酯 : 12 mg/kg (vinyl acetate: Only for use with oily food with low water content and dry solid foods. use temp not to exceed 乙烯 - 乙酸乙烯共聚物 Ethylene-Vinyl Acetate Resin EVA 12( 乙酸乙烯酯 :: 100 乙烯 - 乙烯醇共聚物 Ethylene-Vinyl Alcohol Copolymer EVOH 12( 乙酸乙烯酯 :: 12 mg/kg (vinyl acetate: 12 mg/kg (vinyl acetate: Not foods containing more than 8% alcohol. 19/21

20 No. 中文名称 English CAS. No. 101 乙烯与以下一种或多种单体的聚合物 ( 其中乙烯占最大质量分数 ):1- 丁烯 ; 丙烯 ;5- 亚乙基 -2- 降冰片烯 ; 甲基丙烯酸 ;1- 己烯 ; 丙烯酸 ; 甲基丙烯酸环氧甲酯 ;1- 辛烯 ; 乙酸乙烯酯 ; 一氧化碳 ; 顺丁烯二酸酐 ; 丙烯酸异丁酯 ; 丙烯酸甲酯 ; 丙烯酸丁酯 ; 丙烯酸乙酯 ; 乙酸锌 ; 氢氧化钠 ; 氢氧化钾 Copolymers consisting of ethylene and one or more of the following Comonomers (ethylene accounting for the largest proportion): 1-Butene; Propylene; 5- Ethylidine-2-Norbornene; 2-Methyl-2- Propenoic Acid; 1-Hexene; 2-Propenoic Acid, 2-Propenoic Acid 2-Methyl-, 2- Oxiranylmethyl Ester; 1-Octene; Acetic Acid Ethenyl Ester (EVA); Carbon Monoxide; Maleic Anhydride; Isobutyl Acrylate; Butyl Acrylate; Methacrylic Acid; Ethyl Acrylate; Zinc Acetate; Sodium Hydroxide; Potassium Hydroxide ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; PE 3( 己烯 : ; 15( 辛烯 :;12 ( 乙酸乙烯酯 : ;25( 乙酸锌, 以锌计 : ;0.05 (5- 亚乙基 -2- 降冰片烯 : ; 0.02mg/6dm2( 甲基丙烯酸环氧甲酯 :QM) 3 mg/kg (hexene: ; 15 mg/kg (octene: ; 12 mg/kg (vinyl acetate: ; 25 mg/kg (zinc acetate: SML, calculated as zinc);0.05 mg (5- ethylidene -2- norbornene:;0.02 mg/6 dm 2 (methyl methacrylate oxiranylmethyl ester: QM) 30(calculated as maleic acid);6(calculated 3;22;23 as acrylic acid);6(calculated as methacrylic acid) when no migration test applicable to 5- ethylidene -2- norbornene, use 0.05 mg/6 dm2 (QM) as restriction limit; plastic materials and articles containing 5- ethylidene -2- norbornene, the radio of contact area per food weight should not be greater than 2 dm2/kg. 102 以 3-(4- 羟基 -3- 甲氧基苯基 ) 丙基封端的聚二甲基硅氧烷和硅树脂与 4,4'- 亚异丙基二苯酚 ( 双酚 A); 碳酰二氯和 4-(1- 甲基 -1- 苯乙基 ) 苯酚的共聚物 Siloxanes and Silicones, Dimethyl, 3-(4- Hydroxyl -3- Methoxyphenyl) Propyl groupterminated, polymers with Bisphenol A, Carbonic Dichloride and 4-(1-Methyl -1- Phenyl Ethyl) Phenol PC 0.6 mg/kg (4,4'- (1-0.6[(4,4 - 亚异丙基二苯酚 methylethylidene) ( 双酚 A):;1( 碳酰二氯 Bisphenol: ; 1 : mg/kg (carbonic dichloride:qm) infant food. 1: Distilled water extract (6hr, reflux) 15mg/L, 20% ethanol extract (6hr, reflux) 15mg/L, 4% acetic acid extract (6hr, reflux) 15mg/L, n-hexane extract (6hr, reflux) 15mg/L, potassium permanganate consumption level (Distilled water, for 6hr reflux) 10mg/L, Heavy metal (4% acetic acid, for 6hr reflux) 10mg/L(calculated as Lead). 20/21

21 No. 中文名称 English CAS. No. 2: Weight loss on drying 0.20% (100 C, 3hr), Volatile materials 1.0%, Hexane extract 1.5% (reflux, 2hr) 3: Hexane extract 2% (reflux, 2hr) 4: Distilled water extract (0.5hr, reflux) 0.5%, 65% ethanol extract (2hr, reflux) 0.5%, 4% acetic acid extract (0.5hr, reflux) 0.5%, n-hexane extract (6ht reflux) 0.5%L, Lead (4% acetic acid, for 0.5hr reflux) 1mg/kg. 5: Weight loss after drying 0.15% (100 C, 2hr), Ignition residual 0.2%, Hexane extract 2% (reflux, 2hr) 21/21