Certificate of non-use for examining part

Transcription

1 ICP Test Report Certification Packet Company name : Littelfuse, Inc. Product Series: Surface Mount Diode Array Product #: SP VTG Issue Date: June 28, 2010 It is hereby certified by Littelfuse, Inc. that there is neither RoHS (EU Directive 2002/95/EC)-restricted substance nor such use, for materials to be used for unit parts, for packing/packaging materials, and for additives and the like in the manufacturing processes. In addition, it is hereby reported to you that the parts and sub-materials, the materials to be used for unit parts, the packing/packaging materials, and the additives and the like in the manufacturing processes, are all composed of the following components. Issued by: <Global EHS Coordinator> (1) Parts, sub-materials and unit parts This document covers the SP VTG RoHS-Compliant series products manufactured by Littelfuse, Inc. < Raw Materials Used Please see Table 1 (2) The ICP data on all measurable substances Remarks: Please see appropriate pages as identifed in Table 1 1

2 Table 1: List of Raw Materials covered by this report Total Parts Raw Material Part Number Raw Material Description Page(s) 1 NA Leadframe (A194 Alloy) Adhesive 2200D NA Au Bonding Wire KMC-3580P NA NiPdAu Plating Form Rev. A 2/21/06

3 測試報告 Test Report 號碼 (No.) : KA/2010/10449 日期 (Date) : 2010/01/14 頁數 (Page) : 1 of 9 ASM HK & ASM TECHNOLOGY SINGAPORE 4F, WATSON CENTER, 16 KUNG YIP ST., KWAI CHUNG, HONG KONG (ASM HK)., 2 YISHUN AVENUE 7, SINGAPORE(ASM TECHNOLOGY SINGAPORE) *KA/2010/10449* 以下測試樣品係由客戶送樣, 且由客戶聲稱並經客戶確認如下 (The following samples was/were submitted and identified by/on behalf of the client as): 樣品名稱 (Sample Description) 收件日期 (Sample Receiving Date) 測試期間 (Testing Period) : : : A194 Cu ALLOY 2010/01/ /01/08 TO 2010/01/14 ======================================================================================================================== 測試結果 (Test Results) : 請見下一頁 (Please refer to next pages). Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 No. 61, Kai-Fa Road, Nanzih Export Processing Zone, Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路 61 號 t (07) f (07) Member of the SGS Group

4 測試報告 Test Report 號碼 (No.) : KA/2010/10449 日期 (Date) : 2010/01/14 頁數 (Page) : 2 of 9 ASM HK & ASM TECHNOLOGY SINGAPORE 4F, WATSON CENTER, 16 KUNG YIP ST., KWAI CHUNG, HONG KONG (ASM HK)., 2 YISHUN AVENUE 7, SINGAPORE(ASM TECHNOLOGY SINGAPORE) *KA/2010/10449* 測試結果 (Test Results) 測試部位 (PART NAME) NO.1 : 棕色 A194 Cu ALLOY (BROWN A194 Cu ALLOY) 鎘 / Cadmium (Cd) 鉛 / Lead (Pb) 汞 / Mercury (Hg) 測試項目 (Test Items) 六價鉻 / Hexavalent Chromium Cr(VI) by Spot test / boiling water extraction 銻 / Antimony (Sb) 單位 (Unit) ** 測試方法 (Method) 參考 IEC 62321: 2008 方法, 用感應藕合電漿原子發射光譜儀檢測. / With reference to IEC 62321: 2008 and performed by ICP-AES. 參考 IEC 62321: 2008 方法, 用感應藕合電漿原子發射光譜儀檢測. / With reference to IEC 62321: 2008 and performed by ICP-AES. 參考 IEC 62321: 2008 方法, 用感應藕合電漿原子發射光譜儀檢測. / With reference to IEC 62321: 2008 and performed by ICP-AES. 參考 IEC 62321: 2008 方法, 用 Spot test / boiling water extraction 方法檢測. / With reference to IEC 62321: 2008 and performed by Spot test / boiling water extraction Method. (See Note 6) 參考 US EPA 3052 方法, 用感應藕合電漿原子發射光譜儀檢測銻含量. / With reference to US EPA Method 3052 for Antimony Content. Analysis was performed by ICP-AES. 方法偵測極限值 (MDL) 結果 (Result) NO.1 2 n.d n.d with 50 cm ² surface area Negative 2 n.d. 全氟辛烷磺酸 / Perfluorooctane sulfonates (PFOS) PFOS Acid PFOS Metal Salt PFOS Amide μg/m² 參考 US EPA 3540C: 1996 方法, 以液相層析質譜儀檢測全氟辛烷磺酸含量. / With reference to US EPA 3540C: 1996 method for PFOS Content. Analysis was performed by LC/MS. 1 n.d. 全氟辛酸 ( 銨 ) / PFOA (CAS No.: ) μg/m² 參考 US EPA 3540C: 1996 方法, 以液相層析質譜儀檢測全氟辛酸 ( 銨 ) 含量. / With reference to US EPA 3540C: 1996 method for PFOA Content. Analysis was performed by LC/MS. 1 n.d. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 No. 61, Kai-Fa Road, Nanzih Export Processing Zone, Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路 61 號 t (07) f (07) Member of the SGS Group

5 測試報告 Test Report 號碼 (No.) : KA/2010/10449 日期 (Date) : 2010/01/14 頁數 (Page) : 3 of 9 ASM HK & ASM TECHNOLOGY SINGAPORE 4F, WATSON CENTER, 16 KUNG YIP ST., KWAI CHUNG, HONG KONG (ASM HK)., 2 YISHUN AVENUE 7, SINGAPORE(ASM TECHNOLOGY SINGAPORE) *KA/2010/10449* 測試項目 (Test Items) 多溴聯苯總和 / Sum of PBBs 一溴聯苯 / Monobromobiphenyl 二溴聯苯 / Dibromobiphenyl 三溴聯苯 / Tribromobiphenyl 四溴聯苯 / Tetrabromobiphenyl 五溴聯苯 / Pentabromobiphenyl 六溴聯苯 / Hexabromobiphenyl 七溴聯苯 / Heptabromobiphenyl 八溴聯苯 / Octabromobiphenyl 九溴聯苯 / Nonabromobiphenyl 十溴聯苯 / Decabromobiphenyl 多溴聯苯醚總和 / Sum of PBDEs 一溴聯苯醚 / Monobromodiphenyl ether 二溴聯苯醚 / Dibromodiphenyl ether 三溴聯苯醚 / Tribromodiphenyl ether 四溴聯苯醚 / Tetrabromodiphenyl ether 五溴聯苯醚 / Pentabromodiphenyl ether 六溴聯苯醚 / Hexabromodiphenyl ether 七溴聯苯醚 / Heptabromodiphenyl ether 八溴聯苯醚 / Octabromodiphenyl ether 九溴聯苯醚 / Nonabromodiphenyl ether 十溴聯苯醚 / Decabromodiphenyl ether 鹵素 / Halogen 鹵素 ( 氟 ) / Halogen-Fluorine (F) (CAS No.: ) 鹵素 ( 氯 ) / Halogen-Chlorine (Cl) (CAS No.: ) 鹵素 ( 溴 ) / Halogen-Bromine (Br) (CAS No.: ) 鹵素 ( 碘 ) / Halogen-Iodine (I) (CAS No.: ) 單位 (Unit) 測試方法 (Method) 參考 IEC 62321: 2008 方法, 以氣相層析儀 / 質譜儀檢測. / With reference to IEC 62321: 2008 and performed by GC/MS. 參考 IEC 62321: 2008 方法, 以氣相層析儀 / 質譜儀檢測. / With reference to IEC 62321: 2008 and performed by GC/MS. 參考 BS EN 14582:2007, 以離子層析儀分析. / With reference to BS EN 14582:2007. Analysis was performed by IC. 參考 BS EN 14582:2007, 以離子層析儀分析. / With reference to BS EN 14582:2007. Analysis was performed by IC. 參考 BS EN 14582:2007, 以離子層析儀分析. / With reference to BS EN 14582:2007. Analysis was performed by IC. 參考 BS EN 14582:2007, 以離子層析儀分析. / With reference to BS EN 14582:2007. Analysis was performed by IC. 方法偵測結果極限值 (Result) (MDL) NO.1 - n.d. - n.d. 50 n.d. 50 n.d. 50 n.d. 50 n.d. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 No. 61, Kai-Fa Road, Nanzih Export Processing Zone, Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路 61 號 t (07) f (07) Member of the SGS Group

6 測試報告 Test Report 號碼 (No.) : KA/2010/10449 日期 (Date) : 2010/01/14 頁數 (Page) : 4 of 9 ASM HK & ASM TECHNOLOGY SINGAPORE 4F, WATSON CENTER, 16 KUNG YIP ST., KWAI CHUNG, HONG KONG (ASM HK)., 2 YISHUN AVENUE 7, SINGAPORE(ASM TECHNOLOGY SINGAPORE) *KA/2010/10449* 備註 (Note): 1. = ppm;0.1wt% = 1000ppm 2. n.d. = Not Detected ( 未檢出 ) 3. MDL = Method Detection Limit ( 方法偵測極限值 ) 4. "-" = Not Regulated ( 無規格值 ) 5. **= Qualitative analysis (No Unit) 定性分析 ( 無單位 ) 6. Spot-test: Negative = Absence of Cr(VI) coating / surface layer( 鍍層中偵測不到六價鉻 ), Positive = Presence of Cr(VI) coating / surface layer( 鍍層中偵測到六價鉻 ); The tested sample should be further verified by boiling-water-extraction method if the spot test result cannot be confirmed. ( 當該測項無法確認時, 測試樣品可藉由 boiling-water-extraction 測試方法進一步確認 ) Boiling-water-extraction: Negative = Absence of Cr(VI) coating / surface layer( 鍍層中偵測不到六價鉻 ), Positive = Presence of Cr(VI) coating / surface layer( 鍍層中偵測到六價鉻 ); the detected concentration in boiling-water-extraction solution is equal or greater than 0.02 with 50 cm 2 sample surface area. 該溶液濃度 0.02 with 50 cm 2 (sample surface area) PFOS 參考資訊 (Reference Information) : 指令 2006/122/EC (Directive 2006/122/EC) (1) 該物質不可置於市場上或使用於特殊物質或配置成分重量濃度等於或大於 0.005%. (May not be placed on the market or used as a substance or constituent of preparations in a concentration equal to or higher than % by mass.) (2) 該物質不可置於市場上的半成品或商品或其物件 ; 假若零件上明顯地具有 PFOS 並參照結構上及微細構造上計算 PFOS 重量濃度等於或大於 0.1%, 而紡織品或其他覆蓋物質, 如果 PFOS 在覆蓋物質中含量等於或大於 1µg/m 2. (May not be placed on the market in semi-finished products or articles, or parts thereof, if the concentration of PFOS is equal to or higher than 0.1 % by mass calculated with reference to the mass of structurally or microstructurally distinct parts that contain PFOS or, for textiles or other coated materials, if the amount of PFOS is equal to or higher than 1µg/m 2 of the coated material.) 10. 此份報告替代之前之報告 ( 號碼 KA/200X/XXXXX). This report supersedes all pervious documents bearing the test report number KA/200X/XXXXX. 11. 此為 yyyy/mm/dd 所發行 KA/200X/XXXXX 之加發報告, 原始資料請參考 KA/200X/XXXXX This is the additional test report of KA/200X/XXXXX which was issued on yyyy/mm/dd. Please refer to KA/200X/XXXXX for original information. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 No. 61, Kai-Fa Road, Nanzih Export Processing Zone, Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路 61 號 t (07) f (07) Member of the SGS Group

7 測試報告 Test Report 號碼 (No.) : KA/2010/10449 日期 (Date) : 2010/01/14 頁數 (Page) : 5 of 9 ASM HK & ASM TECHNOLOGY SINGAPORE 4F, WATSON CENTER, 16 KUNG YIP ST., KWAI CHUNG, HONG KONG (ASM HK)., 2 YISHUN AVENUE 7, SINGAPORE(ASM TECHNOLOGY SINGAPORE) *KA/2010/10449* 1) 根據以下的流程圖之條件, 樣品已完全溶解 ( 六價鉻測試方法除外 ) / These samples were dissolved totally by pre-conditioning method according to below flow chart.(cr 6+ test method excluded) 2) 測試人員 : 李宏明 / Name of the person who made measurement: Hungming Li 3) 測試負責人 : 張伯睿 / Name of the person in charge of measurement: Ray Chang 剪裁 製備樣品 / Cutting Preparation 測試樣品重量 / Sample Measurement 鉛 Pb 鎘 Cd 汞 Hg 六價鉻 Cr 6+ 依據不同樣品的材質而以適當的酸進行消化 ( 如下表所示 ) / Acid digestion by suitable acid depended on different sample material (as below table) 硝酸 / 鹽酸 / 氫氟酸的微波消化 / Microwave digestion with HNO 3/HCl/HF 添加適量消化液 / Add appropriate amount of digestion reagent 過濾 / Filtration 加熱至適當溫度進行消化萃取 / Heat to appropriate temperature to extract 溶液 / Solution 樣品材質 / Sample Material 感應藕合電漿原子發射光譜儀 / ICP-AES 鋼, 銅, 鋁, 焊錫 / Steel, copper, aluminum, solder 玻璃 / Glass 金, 鉑, 鈀, 陶瓷 / Gold, platinum, palladium, ceramic 銀 / Silver 殘渣 / Residue 1) 鹼熔融法 / Alkali Fusion 2) 鹽酸溶解 / HCl to dissolve 消化酸液種類 / Digestion Acid 王水, 硝酸, 鹽酸, 氫氟酸, 雙氧水 / Aqua regia, HNO3, HCl, HF, H2O2 硝酸, 氫氟酸 / HNO3/HF 王水 / Aqua regia 硝酸 / HNO3 塑膠 / Plastic 硫酸, 雙氧水, 硝酸, 鹽酸 / H2SO4, H2O2, HNO3, HCl 其他 / Others 加入任何酸至完全溶解 / Any acid to total digestion 冷卻後過濾樣品 / Cool, filter digestate through filter 加入發色劑顯色 / Add diphenyl-carbazide for color development 以紫外光 - 可見光光譜儀, 量測樣品溶液在 540 nm 的吸收度 / measure the absorbance at 540 nm by UV-VIS Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 No. 61, Kai-Fa Road, Nanzih Export Processing Zone, Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路 61 號 t (07) f (07) Member of the SGS Group

8 測試報告 Test Report 號碼 (No.) : KA/2010/10449 日期 (Date) : 2010/01/14 頁數 (Page) : 6 of 9 ASM HK & ASM TECHNOLOGY SINGAPORE 4F, WATSON CENTER, 16 KUNG YIP ST., KWAI CHUNG, HONG KONG (ASM HK)., 2 YISHUN AVENUE 7, SINGAPORE(ASM TECHNOLOGY SINGAPORE) *KA/2010/10449* 多溴聯苯 / 多溴聯苯醚分析流程圖 / PBB/PBDE analytical FLOW CHART 1) 測試人員 : 曹嘉琪 / Name of the person who made measurement: Anson Tsao 2) 測試負責人 : 張伯睿 / Name of the person in charge of measurement: Ray Chang 初次測試程序 / First testing process 選擇性篩檢程序 / Optional screen process 確認程序 / Confirmation process Sample / 樣品 Sample pretreatment / 樣品前處理 Screen analysis / 初篩分析 Sample extraction 樣品萃取 / Soxhlet method 索式萃取法 Concentrate/Dilute Extracted solution 萃取液濃縮 / 稀釋 Filter 萃取液過濾 Analysis by GC/MS 氣相層析質譜儀分析 Issue Report 撰打報告 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 No. 61, Kai-Fa Road, Nanzih Export Processing Zone, Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路 61 號 t (07) f (07) Member of the SGS Group

9 測試報告 Test Report 號碼 (No.) : KA/2010/10449 日期 (Date) : 2010/01/14 頁數 (Page) : 7 of 9 ASM HK & ASM TECHNOLOGY SINGAPORE 4F, WATSON CENTER, 16 KUNG YIP ST., KWAI CHUNG, HONG KONG (ASM HK)., 2 YISHUN AVENUE 7, SINGAPORE(ASM TECHNOLOGY SINGAPORE) *KA/2010/10449* 全氟辛酸 ( 銨 )/ 全氟辛烷磺酸分析流程圖 / Analytical flow chart of PFOA/PFOS content 1) 測試人員 : 曹嘉琪 / Name of the person who made measurement: Anson Tsao 2) 測試負責人 : 張伯睿 / Name of the person in charge of measurement: Ray Chang 樣品前處理 / Sample pretreatment 索式萃取法萃取 ( 參考方法 US EPA 3540) / Sample extraction by Soxhlet extraction (Reference method US EPA 3540) 萃取液稀釋 / 濃縮 / Concentrate/Dilute Extracted solution 以液相層析質譜儀分析萃取液 / Analysis was performed by LC/MS 數據 / Data Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 No. 61, Kai-Fa Road, Nanzih Export Processing Zone, Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路 61 號 t (07) f (07) Member of the SGS Group

10 測試報告 Test Report 號碼 (No.) : KA/2010/10449 日期 (Date) : 2010/01/14 頁數 (Page) : 8 of 9 ASM HK & ASM TECHNOLOGY SINGAPORE 4F, WATSON CENTER, 16 KUNG YIP ST., KWAI CHUNG, HONG KONG (ASM HK)., 2 YISHUN AVENUE 7, SINGAPORE(ASM TECHNOLOGY SINGAPORE) *KA/2010/10449* 鹵素分析流程圖 / Analytical flow chart of halogen content 1) 測試人員 : 李宏明 / Name of the person who made measurement: Hungming Li 2) 測試負責人 : 張伯睿 / Name of the person in charge of measurement: Ray Chang 樣品拍照及報告編號 / Sample picture and report number 樣品前處理 / 分樣 / Sample pretreatment/separation 秤重及將樣品放入樣品槽中 / Weighting and putting sample in cell 氧氣燃燒彈 / 吸收 Oxygen Bomb Combustion / Absorption 稀釋至固定體積 / Dilution to fixed volume 離子層析儀分析 / Analysis was performed by IC Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 No. 61, Kai-Fa Road, Nanzih Export Processing Zone, Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路 61 號 t (07) f (07) Member of the SGS Group

11 測試報告 Test Report 號碼 (No.) : KA/2010/10449 日期 (Date) : 2010/01/14 頁數 (Page) : 9 of 9 ASM HK & ASM TECHNOLOGY SINGAPORE 4F, WATSON CENTER, 16 KUNG YIP ST., KWAI CHUNG, HONG KONG (ASM HK)., 2 YISHUN AVENUE 7, SINGAPORE(ASM TECHNOLOGY SINGAPORE) *KA/2010/10449* ** 報告結尾 (End of Report) ** Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 No. 61, Kai-Fa Road, Nanzih Export Processing Zone, Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路 61 號 t (07) f (07) Member of the SGS Group

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30 測試報告 Test Report 號碼 (No.) : KA/2010/10458 日期 (Date) : 2010/01/14 頁數 (Page) : 1 of 9 ASM HK & ASM TECHNOLOGY SINGAPORE 4F, WATSON CENTER, 16 KUNG YIP ST., KWAI CHUNG, HONG KONG (ASM HK)., 2 YISHUN AVENUE 7, SINGAPORE(ASM TECHNOLOGY SINGAPORE) *KA/2010/10458* 以下測試樣品係由客戶送樣, 且由客戶聲稱並經客戶確認如下 (The following samples was/were submitted and identified by/on behalf of the client as): 樣品名稱 (Sample Description) 收件日期 (Sample Receiving Date) 測試期間 (Testing Period) : : : NiPdAu PLATING MATERIAL 2010/01/ /01/08 TO 2010/01/14 ======================================================================================================================== 測試結果 (Test Results) : 請見下一頁 (Please refer to next pages). Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 No. 61, Kai-Fa Road, Nanzih Export Processing Zone, Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路 61 號 t (07) f (07) Member of the SGS Group

31 測試報告 Test Report 號碼 (No.) : KA/2010/10458 日期 (Date) : 2010/01/14 頁數 (Page) : 2 of 9 ASM HK & ASM TECHNOLOGY SINGAPORE 4F, WATSON CENTER, 16 KUNG YIP ST., KWAI CHUNG, HONG KONG (ASM HK)., 2 YISHUN AVENUE 7, SINGAPORE(ASM TECHNOLOGY SINGAPORE) *KA/2010/10458* 測試結果 (Test Results) 測試部位 (PART NAME) NO.1 : 銀色 NiPdAu PLATING MATERIAL (SILVER NiPdAu PLATING MATERIAL) 鎘 / Cadmium (Cd) 鉛 / Lead (Pb) 汞 / Mercury (Hg) 測試項目 (Test Items) 六價鉻 / Hexavalent Chromium Cr(VI) by Spot test / boiling water extraction 銻 / Antimony (Sb) 單位 (Unit) ** 測試方法 (Method) 參考 IEC 62321: 2008 方法, 用感應藕合電漿原子發射光譜儀檢測. / With reference to IEC 62321: 2008 and performed by ICP-AES. 參考 IEC 62321: 2008 方法, 用感應藕合電漿原子發射光譜儀檢測. / With reference to IEC 62321: 2008 and performed by ICP-AES. 參考 IEC 62321: 2008 方法, 用感應藕合電漿原子發射光譜儀檢測. / With reference to IEC 62321: 2008 and performed by ICP-AES. 參考 IEC 62321: 2008 方法, 用 Spot test / boiling water extraction 方法檢測. / With reference to IEC 62321: 2008 and performed by Spot test / boiling water extraction Method. (See Note 6) 參考 US EPA 3052 方法, 用感應藕合電漿原子發射光譜儀檢測銻含量. / With reference to US EPA Method 3052 for Antimony Content. Analysis was performed by ICP-AES. 方法偵測極限值 (MDL) 結果 (Result) NO.1 2 n.d. 2 n.d. 2 n.d with 50 cm ² surface area Negative 2 n.d. 全氟辛烷磺酸 / Perfluorooctane sulfonates (PFOS) PFOS Acid PFOS Metal Salt PFOS Amide μg/m² 參考 US EPA 3540C: 1996 方法, 以液相層析質譜儀檢測全氟辛烷磺酸含量. / With reference to US EPA 3540C: 1996 method for PFOS Content. Analysis was performed by LC/MS. 1 n.d. 全氟辛酸 ( 銨 ) / PFOA (CAS No.: ) μg/m² 參考 US EPA 3540C: 1996 方法, 以液相層析質譜儀檢測全氟辛酸 ( 銨 ) 含量. / With reference to US EPA 3540C: 1996 method for PFOA Content. Analysis was performed by LC/MS. 1 n.d. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 No. 61, Kai-Fa Road, Nanzih Export Processing Zone, Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路 61 號 t (07) f (07) Member of the SGS Group

32 測試報告 Test Report 號碼 (No.) : KA/2010/10458 日期 (Date) : 2010/01/14 頁數 (Page) : 3 of 9 ASM HK & ASM TECHNOLOGY SINGAPORE 4F, WATSON CENTER, 16 KUNG YIP ST., KWAI CHUNG, HONG KONG (ASM HK)., 2 YISHUN AVENUE 7, SINGAPORE(ASM TECHNOLOGY SINGAPORE) *KA/2010/10458* 測試項目 (Test Items) 多溴聯苯總和 / Sum of PBBs 一溴聯苯 / Monobromobiphenyl 二溴聯苯 / Dibromobiphenyl 三溴聯苯 / Tribromobiphenyl 四溴聯苯 / Tetrabromobiphenyl 五溴聯苯 / Pentabromobiphenyl 六溴聯苯 / Hexabromobiphenyl 七溴聯苯 / Heptabromobiphenyl 八溴聯苯 / Octabromobiphenyl 九溴聯苯 / Nonabromobiphenyl 十溴聯苯 / Decabromobiphenyl 多溴聯苯醚總和 / Sum of PBDEs 一溴聯苯醚 / Monobromodiphenyl ether 二溴聯苯醚 / Dibromodiphenyl ether 三溴聯苯醚 / Tribromodiphenyl ether 四溴聯苯醚 / Tetrabromodiphenyl ether 五溴聯苯醚 / Pentabromodiphenyl ether 六溴聯苯醚 / Hexabromodiphenyl ether 七溴聯苯醚 / Heptabromodiphenyl ether 八溴聯苯醚 / Octabromodiphenyl ether 九溴聯苯醚 / Nonabromodiphenyl ether 十溴聯苯醚 / Decabromodiphenyl ether 鹵素 / Halogen 鹵素 ( 氟 ) / Halogen-Fluorine (F) (CAS No.: ) 鹵素 ( 氯 ) / Halogen-Chlorine (Cl) (CAS No.: ) 鹵素 ( 溴 ) / Halogen-Bromine (Br) (CAS No.: ) 鹵素 ( 碘 ) / Halogen-Iodine (I) (CAS No.: ) 單位 (Unit) 測試方法 (Method) 參考 IEC 62321: 2008 方法, 以氣相層析儀 / 質譜儀檢測. / With reference to IEC 62321: 2008 and performed by GC/MS. 參考 IEC 62321: 2008 方法, 以氣相層析儀 / 質譜儀檢測. / With reference to IEC 62321: 2008 and performed by GC/MS. 參考 BS EN 14582:2007, 以離子層析儀分析. / With reference to BS EN 14582:2007. Analysis was performed by IC. 參考 BS EN 14582:2007, 以離子層析儀分析. / With reference to BS EN 14582:2007. Analysis was performed by IC. 參考 BS EN 14582:2007, 以離子層析儀分析. / With reference to BS EN 14582:2007. Analysis was performed by IC. 參考 BS EN 14582:2007, 以離子層析儀分析. / With reference to BS EN 14582:2007. Analysis was performed by IC. 方法偵測結果極限值 (Result) (MDL) NO.1 - n.d. - n.d. 50 n.d. 50 n.d. 50 n.d. 50 n.d. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 No. 61, Kai-Fa Road, Nanzih Export Processing Zone, Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路 61 號 t (07) f (07) Member of the SGS Group

33 測試報告 Test Report 號碼 (No.) : KA/2010/10458 日期 (Date) : 2010/01/14 頁數 (Page) : 4 of 9 ASM HK & ASM TECHNOLOGY SINGAPORE 4F, WATSON CENTER, 16 KUNG YIP ST., KWAI CHUNG, HONG KONG (ASM HK)., 2 YISHUN AVENUE 7, SINGAPORE(ASM TECHNOLOGY SINGAPORE) *KA/2010/10458* 備註 (Note): 1. = ppm;0.1wt% = 1000ppm 2. n.d. = Not Detected ( 未檢出 ) 3. MDL = Method Detection Limit ( 方法偵測極限值 ) 4. "-" = Not Regulated ( 無規格值 ) 5. **= Qualitative analysis (No Unit) 定性分析 ( 無單位 ) 6. Spot-test: Negative = Absence of Cr(VI) coating / surface layer( 鍍層中偵測不到六價鉻 ), Positive = Presence of Cr(VI) coating / surface layer( 鍍層中偵測到六價鉻 ); The tested sample should be further verified by boiling-water-extraction method if the spot test result cannot be confirmed. ( 當該測項無法確認時, 測試樣品可藉由 boiling-water-extraction 測試方法進一步確認 ) Boiling-water-extraction: Negative = Absence of Cr(VI) coating / surface layer( 鍍層中偵測不到六價鉻 ), Positive = Presence of Cr(VI) coating / surface layer( 鍍層中偵測到六價鉻 ); the detected concentration in boiling-water-extraction solution is equal or greater than 0.02 with 50 cm 2 sample surface area. 該溶液濃度 0.02 with 50 cm 2 (sample surface area) PFOS 參考資訊 (Reference Information) : 指令 2006/122/EC (Directive 2006/122/EC) (1) 該物質不可置於市場上或使用於特殊物質或配置成分重量濃度等於或大於 0.005%. (May not be placed on the market or used as a substance or constituent of preparations in a concentration equal to or higher than % by mass.) (2) 該物質不可置於市場上的半成品或商品或其物件 ; 假若零件上明顯地具有 PFOS 並參照結構上及微細構造上計算 PFOS 重量濃度等於或大於 0.1%, 而紡織品或其他覆蓋物質, 如果 PFOS 在覆蓋物質中含量等於或大於 1µg/m 2. (May not be placed on the market in semi-finished products or articles, or parts thereof, if the concentration of PFOS is equal to or higher than 0.1 % by mass calculated with reference to the mass of structurally or microstructurally distinct parts that contain PFOS or, for textiles or other coated materials, if the amount of PFOS is equal to or higher than 1µg/m 2 of the coated material.) 10. 此份報告替代之前之報告 ( 號碼 KA/200X/XXXXX). This report supersedes all pervious documents bearing the test report number KA/200X/XXXXX. 11. 此為 yyyy/mm/dd 所發行 KA/200X/XXXXX 之加發報告, 原始資料請參考 KA/200X/XXXXX This is the additional test report of KA/200X/XXXXX which was issued on yyyy/mm/dd. Please refer to KA/200X/XXXXX for original information. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 No. 61, Kai-Fa Road, Nanzih Export Processing Zone, Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路 61 號 t (07) f (07) Member of the SGS Group

34 測試報告 Test Report 號碼 (No.) : KA/2010/10458 日期 (Date) : 2010/01/14 頁數 (Page) : 5 of 9 ASM HK & ASM TECHNOLOGY SINGAPORE 4F, WATSON CENTER, 16 KUNG YIP ST., KWAI CHUNG, HONG KONG (ASM HK)., 2 YISHUN AVENUE 7, SINGAPORE(ASM TECHNOLOGY SINGAPORE) *KA/2010/10458* 1) 根據以下的流程圖之條件, 樣品已完全溶解 ( 六價鉻測試方法除外 ) / These samples were dissolved totally by pre-conditioning method according to below flow chart.(cr 6+ test method excluded) 2) 測試人員 : 李宏明 / Name of the person who made measurement: Hungming Li 3) 測試負責人 : 張伯睿 / Name of the person in charge of measurement: Ray Chang 剪裁 製備樣品 / Cutting Preparation 測試樣品重量 / Sample Measurement 鉛 Pb 鎘 Cd 汞 Hg 六價鉻 Cr 6+ 依據不同樣品的材質而以適當的酸進行消化 ( 如下表所示 ) / Acid digestion by suitable acid depended on different sample material (as below table) 硝酸 / 鹽酸 / 氫氟酸的微波消化 / Microwave digestion with HNO 3/HCl/HF 添加適量消化液 / Add appropriate amount of digestion reagent 過濾 / Filtration 加熱至適當溫度進行消化萃取 / Heat to appropriate temperature to extract 溶液 / Solution 樣品材質 / Sample Material 感應藕合電漿原子發射光譜儀 / ICP-AES 鋼, 銅, 鋁, 焊錫 / Steel, copper, aluminum, solder 玻璃 / Glass 金, 鉑, 鈀, 陶瓷 / Gold, platinum, palladium, ceramic 銀 / Silver 殘渣 / Residue 1) 鹼熔融法 / Alkali Fusion 2) 鹽酸溶解 / HCl to dissolve 消化酸液種類 / Digestion Acid 王水, 硝酸, 鹽酸, 氫氟酸, 雙氧水 / Aqua regia, HNO3, HCl, HF, H2O2 硝酸, 氫氟酸 / HNO3/HF 王水 / Aqua regia 硝酸 / HNO3 塑膠 / Plastic 硫酸, 雙氧水, 硝酸, 鹽酸 / H2SO4, H2O2, HNO3, HCl 其他 / Others 加入任何酸至完全溶解 / Any acid to total digestion 冷卻後過濾樣品 / Cool, filter digestate through filter 加入發色劑顯色 / Add diphenyl-carbazide for color development 以紫外光 - 可見光光譜儀, 量測樣品溶液在 540 nm 的吸收度 / measure the absorbance at 540 nm by UV-VIS Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 No. 61, Kai-Fa Road, Nanzih Export Processing Zone, Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路 61 號 t (07) f (07) Member of the SGS Group

35 測試報告 Test Report 號碼 (No.) : KA/2010/10458 日期 (Date) : 2010/01/14 頁數 (Page) : 6 of 9 ASM HK & ASM TECHNOLOGY SINGAPORE 4F, WATSON CENTER, 16 KUNG YIP ST., KWAI CHUNG, HONG KONG (ASM HK)., 2 YISHUN AVENUE 7, SINGAPORE(ASM TECHNOLOGY SINGAPORE) *KA/2010/10458* 多溴聯苯 / 多溴聯苯醚分析流程圖 / PBB/PBDE analytical FLOW CHART 1) 測試人員 : 曹嘉琪 / Name of the person who made measurement: Anson Tsao 2) 測試負責人 : 張伯睿 / Name of the person in charge of measurement: Ray Chang 初次測試程序 / First testing process 選擇性篩檢程序 / Optional screen process 確認程序 / Confirmation process Sample / 樣品 Sample pretreatment / 樣品前處理 Screen analysis / 初篩分析 Sample extraction 樣品萃取 / Soxhlet method 索式萃取法 Concentrate/Dilute Extracted solution 萃取液濃縮 / 稀釋 Filter 萃取液過濾 Analysis by GC/MS 氣相層析質譜儀分析 Issue Report 撰打報告 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 No. 61, Kai-Fa Road, Nanzih Export Processing Zone, Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路 61 號 t (07) f (07) Member of the SGS Group

36 測試報告 Test Report 號碼 (No.) : KA/2010/10458 日期 (Date) : 2010/01/14 頁數 (Page) : 7 of 9 ASM HK & ASM TECHNOLOGY SINGAPORE 4F, WATSON CENTER, 16 KUNG YIP ST., KWAI CHUNG, HONG KONG (ASM HK)., 2 YISHUN AVENUE 7, SINGAPORE(ASM TECHNOLOGY SINGAPORE) *KA/2010/10458* 全氟辛酸 ( 銨 )/ 全氟辛烷磺酸分析流程圖 / Analytical flow chart of PFOA/PFOS content 1) 測試人員 : 曹嘉琪 / Name of the person who made measurement: Anson Tsao 2) 測試負責人 : 張伯睿 / Name of the person in charge of measurement: Ray Chang 樣品前處理 / Sample pretreatment 索式萃取法萃取 ( 參考方法 US EPA 3540) / Sample extraction by Soxhlet extraction (Reference method US EPA 3540) 萃取液稀釋 / 濃縮 / Concentrate/Dilute Extracted solution 以液相層析質譜儀分析萃取液 / Analysis was performed by LC/MS 數據 / Data Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 No. 61, Kai-Fa Road, Nanzih Export Processing Zone, Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路 61 號 t (07) f (07) Member of the SGS Group

37 測試報告 Test Report 號碼 (No.) : KA/2010/10458 日期 (Date) : 2010/01/14 頁數 (Page) : 8 of 9 ASM HK & ASM TECHNOLOGY SINGAPORE 4F, WATSON CENTER, 16 KUNG YIP ST., KWAI CHUNG, HONG KONG (ASM HK)., 2 YISHUN AVENUE 7, SINGAPORE(ASM TECHNOLOGY SINGAPORE) *KA/2010/10458* 鹵素分析流程圖 / Analytical flow chart of halogen content 1) 測試人員 : 李宏明 / Name of the person who made measurement: Hungming Li 2) 測試負責人 : 張伯睿 / Name of the person in charge of measurement: Ray Chang 樣品拍照及報告編號 / Sample picture and report number 樣品前處理 / 分樣 / Sample pretreatment/separation 秤重及將樣品放入樣品槽中 / Weighting and putting sample in cell 氧氣燃燒彈 / 吸收 Oxygen Bomb Combustion / Absorption 稀釋至固定體積 / Dilution to fixed volume 離子層析儀分析 / Analysis was performed by IC Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 No. 61, Kai-Fa Road, Nanzih Export Processing Zone, Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路 61 號 t (07) f (07) Member of the SGS Group

38 測試報告 Test Report 號碼 (No.) : KA/2010/10458 日期 (Date) : 2010/01/14 頁數 (Page) : 9 of 9 ASM HK & ASM TECHNOLOGY SINGAPORE 4F, WATSON CENTER, 16 KUNG YIP ST., KWAI CHUNG, HONG KONG (ASM HK)., 2 YISHUN AVENUE 7, SINGAPORE(ASM TECHNOLOGY SINGAPORE) *KA/2010/10458* ** 報告結尾 (End of Report) ** Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 No. 61, Kai-Fa Road, Nanzih Export Processing Zone, Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路 61 號 t (07) f (07) Member of the SGS Group