HC20131_2010

Size: px

Start display at page:

Download "HC20131_2010"

鹊阎
5 years ago
Views:

Page: 1 of 8 Date: April 14, 2010 WINMATE COMMUNICATION INC. 9 F, NO. 111-6, SHING-DE RD., SAN-CHUNG CITY, TAIPEI, TAIWAN, R.O.C. The following merchandise was submitted and identified by the vendor as: Product Description: 20.

1 Page: 1 of 8 Date: April 14, 2010 WINMATE COMMUNICATION INC. 9 F, NO , SHING-DE RD., SAN-CHUNG CITY, TAIPEI, TAIWAN, R.O.C. The following merchandise was submitted and identified by the vendor as: Product Description: 20.1 Multimedia LCD Monitor Style/ Item No.: R20L100-RKA2XX/ No. 1 Quantity: Total 1 set Testing Period: Apr. 7, 2010 to Apr. 8, 2010 We have tested the submitted sample(s) as requested and the following results were obtained: Test Required: (According to client s test specification, please see following sheets in detail.) 1. Vibration Test Test Results: -PLEASE SEE ATTACHED SHEETS- Terence Hsieh Manager - Operation

2 Page: 2 of 8 1. Vibration Test: Test Equipment: Name Brand Model Serial No. Vibration Test System UNHOLTZ-DICKIE SAI60-H560BAC/2/ST 474 Controller Dactron LASER Control Accelerometer PCB 353B Lab Environmental Conditions: Ambient temperature: 25±3 Relative humidity: 55±20%RH Test Method/ Specification: Test Method: Reference to MIL-STD-810G, Method Testing Procedures Ⅰ, Table 514.6C-VI, Category-4 Composite wheeled vehicle vibration exposures. (Break points for curves of Figure 514.6C-3) Sample Condition: Packaged Wave form: Random Frequency: 5~500 Hz (Test Spectrums as shown in the following sheets in detail) Impact acceleration: 1.48 & 1.90 & 2.24 Grms Direction: X, Y, Z axes (See photo 7 ~ 9) Duration: 1 hour/ axis Examine the appearance of specimen(s) by visual check and perform functional check after this test. Functional check: Connect the specimen with rated power then examine whether the display function of specimen could be work normally or not. Place the product on the vibration table in its normal operating orientation and configuration. The Product shall be no fixture to the vibration table such that the vibratory input is transmitted directly to the product. Operating the product during the test. Vibrate the product up the frequency range at a rate of 5 to 500 Hz. At the appropriate level in the table of test condition in each of three orthogonal axes. The test shall last approximately 60 minutes per axis. Equivalent to 1.48 & 1.90 & 2.24 Grms. Document the result during the test. The functional and electrical check is required, document the result after the check. Performance check: Running Window XP with stress software BCM diagnostics Pro version 2.30.

3 Page: 3 of 8 Test Method/ Specification--Continued: Test Spectrums: Vertical - Z axis Transverse - X axis Longitudinal - Y axis Frequency (Hz) PSD (g 2 /Hz) Frequency (Hz) PSD (g 2 /Hz) Frequency (Hz) PSD (g 2 /Hz) equivalent to 1.48 G rms equivalent to 2.24 G rms equivalent to 1.90 G rms

4 Page: 4 of 8 Specimen: Style/ Item No.: R20L100-RKA2XX/ No. 1 Quantity: total 1 set Test Result: Style/Item No. Check Item Appearance check (Visual check) Functional Check & Performance Check R20L100-RKA2XX/ No. 1 No visible damage Normal

5 Page: 5 of 8 Test Photos: 1. Appearance of specimen 2. Appearance of specimen 3. Appearance of specimen 4. Appearance of specimen 5. Appearance of specimen 6. Appearance of specimen

6 Page: 6 of 8 Test Photos--Continued: 7. Vibration Test -- X axis 8. Vibration Test -- Y axis 9. Vibration Test -- Z axis 10. Functional check 11. Functional check

7 Page: 7 of 8 Test Photos--Continued: (gn)2/hz profile(f) high-abort(f) low-abort(f) high-alarm(f) low-alarm(f) control(f) E Frequency (Hz) (gn)2/hz Frequency response spectrum: X axis profile(f) high-abort(f) low-abort(f) high-alarm(f) low-alarm(f) control(f) E Frequency (Hz) 13. Frequency response spectrum: Y axis

8 Page: 8 of 8 Test Photos--Continued: (gn)2/hz profile(f) high-abort(f) low-abort(f) high-alarm(f) low-alarm(f) control(f) E Frequency (Hz) 14. Frequency response spectrum: Z axis The End of Test Report

HC50246_2009

HC50246_2009 Page: 1 of 7 Date: June 2, 2009 WINMATE COMMUNICATION INC. 9 F, NO. 111-6, SHING-DE RD., SAN-CHUNG CITY, TAIPEI, TAIWAN, R.O.C. The following merchandise was submitted and identified by the vendor as: