Disclaimer and Warning Thank you for purchasing the DJI Snail series product (hereinafter referred to as product ). The information in this document a

Size: px

Start display at page:

Download "Disclaimer and Warning Thank you for purchasing the DJI Snail series product (hereinafter referred to as product ). The information in this document a"

髦宽尝沈
5 years ago
Views:

1 DJI SNAIL D Propeller 5048 Tri-Blade Propeller User Guide V

2 Disclaimer and Warning Thank you for purchasing the DJI Snail series product (hereinafter referred to as product ). The information in this document affects your safety and your legal rights and responsibilities. Read this disclaimer carefully before using this product. By using this product, you hereby agree to this disclaimer and signify that you have read it fully. Please install and use this product in strict accordance with the User Guide. SZ DJI TECHNOLOGY CO., LTD. and its affiliated companies assume no liability for damage(s) or injuries incurred directly or indirectly from using, installing or modifying this product improperly, including but not limited to using nondesignated accessories. DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as DJI ) and its affiliated companies. Names of products, brands, etc., appearing in this document are trademarks or registered trademarks of their respective owner companies. This product and document are copyrighted by DJI with all rights reserved. No part of this product or document shall be reproduced in any form without the prior written consent or authorization of DJI. This disclaimer is produced in various languages. In the event of divergence among different versions, the Chinese version shall prevail when the product in question is purchased in China, and the English version shall prevail when the product in question is purchased in any other region. Introduction Snail D Propellers and 5048 Tri-Blade Propellers are compatible with the Snail Racing Propulsion System. When mounting onto the Snail 2305 Racing Motors, extra Snail Propeller Adapter is necessary for securing. 1

3 Parts Get Snail D Propellers pair (CW, CCW), 5048 Tri-Blade Propellers pair (CW, CCW) and Snail Propeller Adapter on Official DJI store separately D Propellers 5048 Tri-Blade Propellers Snail Propeller Adapter Assembling the Propellers Tools Required: M2 hex key and Snail Propeller Adapter 1. Remove the screws securing the Quick-Release Propeller Adapter on the 2305 Racing Motors, and then remove the Quick-Release Propeller Adapter and the spring if there is any. 2

4 2. Remove the cap on the Snail Propeller Adapter. 3. Align the holes of the black Propeller Adapter with the holes on the CW motors. Insert the M2 4 screws and tighten to secure. Align the holes of the red Propeller Adapter with the holes on the CCW motors. Insert the M2 4 screws and tighten to secure. 4. Install the unmarked propellers onto the red Propeller Adapter, and install the propellers marked with CW onto the black Propeller Adapter. 5. Secure the propellers by rotating the red cap onto the axes of the red Propeller Adapter and black cap onto the axes of the black Propeller Adapter. Using D Propellers installation as an example. Before mounting the D propellers, select 3D Mode in DJI Assistant 2 and update the corresponding firmware. Stand clear of the motors and DO NOT touch the propellers when they are spinning. DO NOT mix propeller types. 3

5 Use appropriate propellers for your needs, as they are easy to wear out. Look after screws during installation and removal. Refer to the DJI Snail Racing Propulsion System User Manual for more information. Specification Propellers Diameter Thread Pitch Weight (single propeller) D propellers 6 4.8inch ( cm) 4.10g 5048 propellers 5 4.8inch ( cm) 5.68g This content is subject to change. Download the latest version from If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. Copyright 2016 DJI All Rights Reserved. Printed in China.

6 DJI SNAIL D 桨 5048 三叶桨使用说明 V

7 免责声明感谢您购买 DJI TM Snail 竞速多旋翼动力系统系列配件在使用 Snail 竞速多旋翼动力系统系列配件之前, 请仔细阅读本声明, 一旦使用, 即被视为对本声明全部内容的认可和接受请严格遵守说明安装和使用该产品因用户不当使用安装改装 ( 包括使用非指定的 DJI 零配件, 如 : 电机电调螺旋桨等 ) 造成的任何损失, 深圳市大疆创新科技有限公司及其关联公司将不承担任何责任 DJI 是深圳市大疆创新科技有限公司及其关联公司的商标本文出现的产品名称品牌等, 均为其所属公司的商标或注册商标本产品及说明为深圳市大疆创新科技有限公司版权所有未经许可, 不得以任何形式复制翻印关于不同语言版本的免责声明可能存在的语义差异, 中国以中文版为准, 其他地区以英文版为准简介 Snail D 桨及 5048 三叶桨用于搭配 Snail 竞速多旋翼动力系统使用如需安装于 Snail 2305 竞速电机上, 需搭配 Snail 普通桨转接件进行固定 1

8 相关物品 Snail D 桨 ( 含 CW 及 CCW 桨 ) 5048 三叶桨 ( 含 CW 及 CCW 桨 ) 及普通桨转接件均为独立包装, 用户需分别购买 D 桨 5048 三叶桨 Snail 普通桨转接件安装螺旋桨安装时自备适用于桨座固定螺丝 (M2 4) 的内六角扳手 1. 若用户手中的 2305 竞速电机上已安装快拆桨桨座, 则需先行拆下原桨座底座 : 拧开 2305 电机上用于固定桨座的螺丝, 并取下原桨座及弹簧 2

9 2. 取下螺旋桨转接件上的旋帽 3. 将红色普通桨转接件与 CCW 电机上的安装孔对齐, 黑色普通桨转接件与 CW 电机上的安装孔对齐, 拧紧螺丝进行固定 4. 安装未带有 CW 标志的螺旋桨到装有红色螺旋桨转接件的电机上, 带 CW 标志的螺旋桨到黑色螺旋桨转接件的电机上 5. 将原旋帽安装回普通桨转接件的轴上, 并顺时针方向旋转红色旋帽, 逆时针方向旋转黑色旋帽, 直至完全固定安装说明以 D 桨为例 D 桨需在 DJI Assistant 2 调参软件中选择 3D 模式并进行固件升级由于桨叶较薄, 请小心操作以防意外划伤不可混用不同型号的螺旋桨螺旋桨为易损耗品, 如有需要, 请另行购买拆装过程中请注意妥善保管螺丝配件详细内容请参阅 DJI Snail 竞速多旋翼动力系统用户手册 3

Disclaimer and Warning EN Congratulations on purchasing your new DJI product. The information in this document affects your safety and your legal righ

INSPIRE 1 1345LS Propeller Mounting Plate Kit 1345LS 快拆桨底座套件 Product Information 产品信息 V1.0 2017.02 Disclaimer and Warning EN Congratulations on purchasing your new DJI product. The information in this