Captive Screws Styled knob series M3 thread size Smooth knob meets UL-1950 Designed for hand operation Spring ejected Wide variety of sizes, re

Size: px
Start display at page:

Download "Captive Screws Styled knob series M3 thread size Smooth knob meets UL-1950 Designed for hand operation Spring ejected Wide variety of sizes, re"

Transcription

1 Captive Screws d knob series M3 thread size Smooth knob meets U-1950 Designed for hand operation Spring ejected Wide variety of sizes, recesses and installation options Material and Finish : Press-in: Hardened carbon steel, zinc plated, chromate, plus sealer Flare-in and : Aluminum, natural P.C. board style: 300 Series stainless steel, passivated : Aluminum, natural or black powder coated Screw: Hardened carbon steel, zinc plated, chromate, plus sealer See pages , 543 Notes To ensure you receive SOUTHCO quality parts, look for the segmented circle s Slotted No. 1 Phillips T10 TORX Height and Screw Projection (Flare-in style shown) A Min. s ACTUA SIZE A Max. T10 TORX / Unfastened Unfastened Fastened P-2 No. 1 Phillips / H-2 P.C. Board Ø 1 (.42) Ø 1 (.42) Ø 1 (.42) Ø 1 (.42) To request a quote, please or call us at Thread size Ø 5.5 (.217) Ø 4.6 (.181) Ø 4.9 (.194) (.058) Ø 6.1 (.240) Washer (supplied) Ø 7.8 (.307) TORX is a registered trademark of ACUMENT Intellectual Properties, C (.025)

2 441 P.C. Board Height H (.33) 8.3 (.33) 8.1 (.32) 8.6 (.34) Outer Panel Dimensions A Min. 0.9 (.036) (.061) (.059) 2.5 (.098) 4 (.157) 5.6 (.220) (.058) (.063) A Max. B (.058) 2.5 (.098) 4 (.156) 5.6 (.219) 7.1 (.281) (.058) 2.5 (.098) (.063) 2.4 (.094) (.015) (.015) 2.4 (.093) 4 (.156) (.015) (.015) 2 (.080) 2.8 (.111) 3.6 (.143) Total Float (.08) Flange ength Screw Projection Beyond Outer Surface of Panel P-2 Slotted Phillips Part numbers in shaded rows (shown in table) are fully retracting in minimum panel thickness TORX TORX / Slot Phillips / Slot 3.8 (.15) (.10) 5.5 (.22) (.16) 7 (.28) (.22) 8.6 (.34) (.06) 4.5 (.18) (.041) 1.8 (.070) 2.6 (.104) 4.2 (.166) 5.8 (.299) 1.0 (.041) 1.8 (.070) 2.6 (.101) 3.4 (.132) 4.2 (.164) 4 (.16) (.06) 4.7 (.19) (.10) 5.7 (.22) (.16) 7.2 (.28) (.22) 8.8 (.35) (.10) 5.7 (.22) (.16) 7.2 (.28) (.22) 8.8 (.35) (.13) 6.4 (.25) (.19) 7.9 (.31) (.25) 9.5 (.37) (.07) 5.1 (.20) (.13) 6.6 (.26) (.19) 8.2 (.32) (.07) 5.1 (.20) (.13) 6.6 (.26) (.19) 8.2 (.32) (.13) 6.6 (.26) (.19) 8.2 (.32) To add a black powder coated finish, change the part number from the table as shown: Change 1 to 5: Change 2 to 6: Change 3 to 7: For a smooth knob, change the part number from the table as shown: Change 0 to 1: Change 4 to 5: TORX is a registered trademark of ACUMENT Intellectual Properties, C All screw part numbers shown in table are for a natural knob finish and a knurled knob For black finish and smooth knob options, minimums may apply

3 Captive Screws d knob series M3.5 thread size Smooth knob meets U-1950 Designed for hand operation Spring ejected Wide variety of sizes, recesses and installation options Material and Finish : Press-in: Hardened carbon steel, zinc plate, chromate, plus sealer P.C. board: 300 Series stainless steel, passivated Flare-in, floating and snap-in: Aluminum, natural : Aluminum, natural or black powder coated Screw: Hardened carbon steel, zinc plated, chromate, plus sealer See pages , 543 Notes To ensure you receive SOUTHCO quality parts, look for the segmented circle s Slotted No. 2 Phillips T15 TORX Height and Screw Projection (Flare-in style shown) A Min. s ACTUA SIZE A Max. T15 TORX / Unfastened Unfastened Fastened P-2 No. 2 Phillips / H-2 P.C. Board Snap-In Ø 1 Ø 1 Ø 1 Ø 1 Ø 1 To request a quote, please or call us at Thread size Ø 6.3 (.248) (.058) Ø 6.9 (.272) Ø 5.3 (.209) Ø 5.7 (.224) Washer (supplied) Ø 8.6 (.339) (.025) TORX is a registered trademark of ACUMENT Intellectual Properties, C

4 443 P.C. Board Snap-In Height Outer Panel Dimensions Screw Projection Beyond Outer Surface of Panel Flange Total B ength Float H-2 A Min. A Max. P (.63) 14.8 (.58) 15.3 (.60) 15.4 (.60) 15.4 (.60) 11.2 (.44) 10 (.39) 1 (.41) 1 (.42) 1 (.42) 0.9 (.036) (.061) (.058) (.125) (.015) (.058) (.125) (.015) 1.8 (.07) Slotted Phillips TORX TORX / Slot Phillips / Slot 0.5 (.02) 5.3 (.21) (.09) 6.9 (.27) (.15) 8.5 (.33) (.21) 10.1 (.40) (.06) 6.2 (.24) (.07) 1.1 (.04) 6 (.24) (.126) 4.8 (.189) (.062) 3.4 (.135) 2.7 (.11) 7.6 (.30) (.188) 6.4 (.250) (.125) 5 (.197) 4.3 (.17) 9.2 (.36) (.252) 7.9 (.312) 4.8 (.189) 6.6 (.26) 5.9 (.23) 1 (.43) (.126) 4.8 (.189) (.062) 3.4 (.135) 2.7 (.11) 7.6 (.30) (.17) 9.2 (.36) (.23) 1 (.43) (.17) 9.2 (.36) (.23) 1 (.43) (.189) 6.4 (.250) (.125) 5 (.197) 5.9 (.23) 1 (.43) (.083) 2.9 (.113) 2.2 (.063) 2.9 (.114) (.09) 3.7 (.144) (.063) 2.4 (.094) 3.7 (.146) 4.5 (.176) 0.5 (.02) 1 (.039) 2 (.079) 1.1 (.044) 1 (.039) (.063) 2.6 (.103) 1.7 (.067) 2.4 (.09) 7.2 (.28) (.16) 8.8 (.35) (.22) 1 (.41) (.09) 7.2 (.28) (.16) 8.8 (.35) (.22) 1 (.41) (.16) 8.8 (.35) (.22) 1 (.41) (.22) (.09) 7.2 (.28) (.16) 8.8 (.35) (.22) 1 (.41) (.09) 7.2 (.28) (.16) 8.8 (.35) (.22) 1 (.41) Part numbers in shaded rows (shown in table) are fully retracting in minimum panel thickness To add a black powder coated finish, change the part number from the table as shown: Change 1 to 5: Change 2 to 6: Change 3 to 7: For a smooth knob, change the part number from the table as shown: Change 0 to 1: Change 4 to 5: TORX is a registered trademark of ACUMENT Intellectual Properties, C All screw part numbers shown in table are for a natural knob finish and a knurled knob For black finish and smooth knob options, minimums may apply

5 Captive Screws d knob series M4 thread size Designed for hand operation Spring ejected Wide variety of sizes, recesses and installation options s Slotted No. 2 Phillips T25 TORX T25 TORX / No. 2 Phillips / Material and Finish : Press-in: Hardened carbon steel, zinc plate, chromate, plus sealer Flare-in, floating and snap-in: Aluminum, natural : Aluminum, natural or black powder coated Screw: Hardened carbon steel, zinc plated, chromate, plus sealer ACTUA SIZE Height and Screw Projection (Flare-in style shown) Unfastened 1 (.04) Screw projection for TORX and TORX / slot Unfastened Fastened See pages , 543 Notes A Min. H-2 To ensure you receive SOUTHCO quality parts, look for the segmented circle A Max. P-2 s Snap-In To request a quote, please or call us at Thread size Ø 7.9 (.310) Ø 6.7 (.262) Washer (supplied) Ø 7.3 (.287) Ø 10.2 (.400) (.025) TORX is a registered trademark of ACUMENT Intellectual Properties, C

6 445 Snap-In Height Outer Panel Dimensions Screw Projection Beyond Outer Surface of Panel Flange Total B ength Float H-2 A Min. A Max. P (.64) 15.6 (.61) 16.2 (.64) 15.7 (.62) (.41) 11.2 (.44) 11.2 (.44) 0.9 (.036) (.058) (.125) (.015) (.126) 4.8 (.189) (.062) 1.8 (.070) 3.4 (.135) Slotted Phillips TORX TORX / Slot Phillips / Slot (.02) 5.6 (.22) (.09) 7.2 (.28) (.15) 8.7 (.34) (.21) 10.3 (.41) (.05) 6.3 (.25) (.11) 7.9 (.31) (.189) 6.4 (.251) (.125) 5 (.197) 4.4 (.17) 9.5 (.37) (.251) 7.9 (.312) 4.8 (.187) (.26) 6 (.24) 11.1 (.44) (.11) 7.9 (.31) (.058) (.125) (.015) 1.8 (.07) 4.4 (.17) 9.5 (.37) (.126) 4.8 (.189) (.062) 3.4 (.135) 6 (.24) 11.1 (.44) (.17) 9.5 (.37) (.24) 11.1 (.44) (.189) 6.4 (.250) (.125) 5 (.197) 6 (.24) 11.1 (.44) (.09) (.127) 2.3 (.063) 3.1 (.121) (.09) 4 (.158) (.063) 2.4 (.094) 3.9 (.153) 0.5 (.02) 1 (.039) 2 (.079) 1 (.039) (.063) 2.6 (.102) (.063) 2.5 (.098) 3.5 (.138) (.190) 1.1 (.044) 1.7 (.068) 2.6 (.103) 2.4 (.09) 7.2 (.28) (.16) 8.8 (.35) (.22) 1 (.41) (.09) 7.2 (.28) (.16) 8.8 (.35) (.22) 1 (.41) (.16) 7.2 (.28) (.22) 8.8 (.35) (.04) 5.6 (.22) (.11) 7.2 (.28) (.17) 8.8 (.35) (.23) 1 (.41) (.11) 7.2 (.28) (.17) 8.8 (.35) (.23) 1 (.41) (.11) 7.2 (.28) (.17) 8.8 (.35) (.23) 1 (.41) To add a black powder coated finish, change the part number from the table as shown: Change 1 to 5: Change 2 to 6: Part numbers in shaded rows (shown in table) are fully retracting in minimum panel thickness For a smooth knob, change the part number from the table as shown: Change 0 to 1: Change 4 to 5: All screw part numbers shown in table are for a natural knob finish and a knurled knob For black finish and smooth knob options, minimums may apply TORX is a registered trademark of ACUMENT Intellectual Properties, C

7 Captive Screws d knob series M5 thread size Designed for hand operation Spring ejected Wide variety of sizes, recesses and installation options s Slotted No. 2 Phillips T25 TORX T25 TORX / No. 2 Phillips / Material and Finish : Press-in: Hardened carbon steel, zinc plate, chromate, plus sealer Flare-in, floating and snap-in: Aluminum, natural : Aluminum, natural or black powder coated ACTUA SIZE Height and Screw Projection (Flare-in style shown) Screw: Hardened carbon steel, zinc plated, chromate, plus sealer Unfastened 1 (.04) Screw projection for TORX and TORX / slot Unfastened Fastened See pages , 543 Notes A Min. H-2 To ensure you receive SOUTHCO quality parts, look for the segmented circle A Max. P-2 s Snap-In To request a quote, please or call us at Thread size Ø 7.9 (.310) Ø 6.7 (.262) Washer (supplied) Ø 7.3 (.287) Ø 10.2 (.400) (.025) TORX is a registered trademark of ACUMENT Intellectual Properties, C

8 447 Snap-In Height Outer Panel Dimensions Screw Projection Beyond Outer Surface of Panel Flange Total ength Float H-2 A Min. A Max. B P (.64) (.036) 15.6 (.61) 10.5 (.41) 16 (.63) 11.2 (.44) 15.7 (.62) 11.2 (.44) (.058) (.125) (.015) (.02) (.058) (.125) (.015) (.02) 1.8 (.070) Slotted Phillips TORX TORX / Slot Phillips / Slot (.024) 5.5 (.22) (.087) 7.1 (.28) (.15) 8.7 (.34) (.21) 10.3 (.41) (.070) 1.2 (.05) 6.3 (.25) (.126) 4.8 (.189) (.062) 3.4 (.135) 2.8 (.11) 7.9 (.31) (.189) 6.4 (.250) (.125) 5 (.197) 4.4 (.17) 9.5 (.37) (.251) 7.9 (.312) 4.8 (.189) 6.6 (.260) 6 (.24) 11.1 (.44) (.126) 4.8 (.189) (.062) 3.4 (.135) 2.8 (.11) 7.9 (.31) (.17) 9.5 (.37) (.24) 11.1 (.44) (.17) 9.5 (.37) (.24) 11.1 (.44) (.189) 6.4 (.250) (.125) 5 (.197) 6 (.24) 11.1 (.44) (.090) (.127) 2.3 (.063) 3.1 (.121) (.09) 4 (.158) (.063) 2.4 (.094) 3.9 (.153) 4.8 (.190) 0.5 (.020) 1 (.039) 2 (.079) 1.1 (.044).9 1 (.039) (.063) 2.6 (.103) (.04) 1.7 (.068) (.063) 2.5 (.098) 3.5 (.138) 2.6 (.103) 2.4 (.09) 7.2 (.28) (.16) 8.8 (.35) (.22) 1 (.41) (.09) 7.2 (.28) (.16) 8.8 (.35) (.22) 1 (.41) (.16) 8.8 (.35) (.22) 1 (.41) (.04) 5.6 (.22) (.11) 7.2 (.28) (.17) 8.8 (.35) (.23) 1 (.41) (.11) 7.2 (.28) (.17) 8.8 (.35) (.23) 1 (.41) (.11) 7.2 (.28) (.17) 8.8 (.35) (.23) 1 (.41) To add a black powder coated finish, change the part number from the table as shown: Change 1 to 5: Change 2 to 6: Part numbers in shaded rows (shown in table) are fully retracting in minimum panel thickness For a smooth knob, change the part number from the table as shown: Change 0 to 1: Change 4 to 5: All screw part numbers shown in table are for a natural knob finish and a knurled knob For black finish and smooth knob options, minimums may apply TORX is a registered trademark of ACUMENT Intellectual Properties, C

9 Captive Screws d knob series M6 thread size Designed for hand operation Spring ejected Wide variety of sizes, recesses and installation options s Slotted No. 2 Phillips T30 TORX T30 TORX / No. 2 Phillips / Material and Finish : Press-in: Hardened carbon steel, zinc plate, chromate, plus sealer Flare-in and : Aluminum, natural : Aluminum, natural or black powder coated ACTUA SIZE Height and Screw Projection (Flare-in style shown) Screw: Hardened carbon steel, zinc plated, chromate, plus sealer See pages , 543 Unfastened 1 (.04) Screw projection for TORX and TORX / slot Unfastened Fastened Notes To ensure you receive SOUTHCO quality parts, look for the segmented circle A Min. A Max. P-2 H-2 s Ø 14.7 (.58) Ø 14.7 (.58) Ø 14.7 (.58) To request a quote, please or call us at Thread Size Ø 9.4 (.372) Ø 8.1 (.319) Washer (supplied) Ø 11.9 (.470) Ø 8.9 (.349) (.025) TORX is a registered trademark of ACUMENT Intellectual Properties, C

10 449 Height H-2 Outer Panel Dimensions A Min. A Max. B Total Float Flange ength Screw Projection Beyond Outer Surface of Panel P-2 Slotted Phillips TORX TORX / Slot Phillips / Slot 20 (.79) 19.3 (.76) 20 (.79) 13.4 (.53) 12.7 (.50) 13.3 (.52) 0.9 (.036) (.058) (.126) 4.8 (.189) 6.4 (.251) (.058) (.126) 4.8 (.189) (.063) (.125) 4.8 (.189) 6.4 (.250) 7.9 (.312) (.125) 4.8 (.189) 6.4 (.250) (.063) 2.4 (.094) (.015) (.062) (.125) 4.8 (.189) (.015) (.062) (.125) 2.5 (.097) 3.3 (.128) 4.1 (.160) (.09) 0.5 (.02) 7.1 (.28) (.08) 8.7 (.34) (.15) 10.3 (.41) (.21) 11.9(.47) (.070) 1.2 (.05) 7.8 (.31) (.135) 2.8 (.11) 9.4 (.31) (.197) 4.4 (.17) 11 (.43) (.260) 6 (.24) 12.6 (.50) (.070) 3.4 (.135) 2.8 (.11) 9.4 (.37) (.17) 11 (.43) (.24) 12.6 (.50) (.17) 11 (.43) (.24) 12.6 (.50) (.197) 6 (.24) 12.6 (.50) (.127) 4 (.158) 4.8 (.189) 2.1 (.08) 8.8 (.35) (.15) 1 (.41) (.21) 12 (.47) (.08) 8.8 (.35) (.15) 1 (.41) (.21) 12 (.47) (.15) 1 (.41) (.21) 12 (.47) Part numbers in shaded rows (shown in table) are fully retracting in minimum panel thickness To add a black powder coated finish, change the part number from the table as shown: Change 1 to 5: Change 2 to 6: For a smooth knob, change the part number from the table as shown: Change 0 to 1: Change 4 to 5: All screw part numbers shown in table are for a natural knob finish and a knurled knob For black finish and smooth knob options, minimums may apply TORX is a registered trademark of ACUMENT Intellectual Properties, C

11 Captive Screws d knob series 4-40 thread size Smooth knob meets U-1950 Designed for hand operation Spring ejected Wide variety of sizes, recesses and installation options Material and Finish : Press-in: Hardened carbon steel, zinc plate, chromate, plus sealer P.C. board style: 300 Series stainless steel Flare-in and : Aluminum, natural : Aluminum, natural or black powder coated Screw: Hardened carbon steel, zinc plated, chromate, plus sealer See pages , 543 Notes To ensure you receive SOUTHCO quality parts, look for the segmented circle s Slotted No. 1 Phillips T10 TORX Height and Screw Projection (Flare-in style shown) A Min. s ACTUA SIZE A Max. T10 TORX / Unfastened Unfastened Fastened P-2 No. 1 Phillips / H-2 P.C. Board Ø 1 (.42) Ø 1 (.42) Ø 1 (.42) Ø 1 (.42) To request a quote, please or call us at Thread size Ø 5.5 (.217) (.058) Ø 6.1 (.240) Ø 4.6 (.181) Ø 4.9 (.194) Washer (supplied) TORX is a registered trademark of ACUMENT Intellectual Properties, C Ø 7.8 (.307) (.025)

12 451 Height H (.33) Outer Panel Dimensions A Min. 0.9 (.036) A Max. B Total Float Flange ength Screw Projection Beyond Outer Surface of Panel P-2 Slotted Phillips TORX TORX / Slot Phillips / Slot 3.8 (.15) (.10) 5.5 (.22) (.16) 7 (.28) (.22) 8.6 (.34) P.C. Board (.33) (.061) (.06) 4.5 (.18) (.32) 8.6 (.34) (.059) 2.5 (.1) 4 (.157) 5.6 (.220) (.059) (.063) (.058) 2.5 (.100) 4 (.156) 5.6 (.219) 7.1 (.281) (.058) 2.5 (.100) (.063) 2.4 (.094) (.015) (.015) 2.4 (.093) 4 (.156) (.015) (.015) 2 (.080) 2.8 (.111) 3.6 (.143) 2.1 (.08) 1 (.041) 1.8 (.070) (.06) 4 (.16) (.19) ( (.10) 5.7 (.22) (.166) 4 (.16) 7.2 (.28) (.229) 1 (.041) 1.8 (.070) 2.6 (.101) 3.4 (.132) 4.2 (.164) 5.6 (.22) 8.8 (.35) (.10) 5.7 (.22) (.16) 7.2 (.28) (.22) (.13) 8.8 (.35) (.25) (.19) 7.9 (.31) (.25) 9.5 (.37) (.07) 5.1 (.20) (.13) 6.6 (.26) (.19) 8.2 (.32) (.07) 5.1 (.20) (.13) 6.6 (.26) (.19) 8.2 (.32) (.13) 6.6 (.26) (.19) 8.2 (.32) To add a black powder coated finish, change the part number from the table as shown: Change 1 to 5: Change 2 to 6: Change 3 to 7: Part numbers in shaded rows (shown in table) are fully retracting in minimum panel thickness For a smooth knob, change the part number from the table as shown: Change 0 to 1: Change 4 to 5: TORX is a registered trademark of ACUMENT Intellectual Properties, C All screw part numbers shown in table are for a natural knob finish and a knurled knob For black finish and smooth knob options, minimums may apply

13 Captive Screws d knob series 6-32 thread size Smooth knob meets U-1950 Designed for hand operation Spring ejected Wide variety of sizes, recesses and installation options Material and Finish : Press-in: Hardened carbon steel, zinc plate, chromate, plus sealer P.C. board style: 300 Series stainless steel, passivated Flare-in, floating and snap-in: Aluminum, natural : Aluminum, natural or black powder coated Screw: Hardened carbon steel, zinc plated, chromate, plus sealer See pages , 543 Notes To ensure you receive SOUTHCO quality parts, look for the segmented circle s Slotted No. 2 Phillips T15 TORX A Min. ACTUA SIZE Height and Screw Projection (Flare-in style shown) s A Max. T15 TORX / Unfastened Unfastened Fastened P-2 No. 2 Phillips / H-2 P.C. Board Snap-In Ø 1 Ø 1 Ø 1 Ø 1 Ø 1 To request a quote, please or call us at Thread size Ø 6.3 (.248) (.058) Ø 6.9 (.272) Ø 5.3 (.209) Ø 5.7 (.224) Washer (supplied) Ø 8.6 (.339) (.025) TORX is a registered trademark of ACUMENT Intellectual Properties, C

14 453 P.C. Board Snap-In Screw Projection Outer Panel Beyond Outer Height Dimensions Total B Flange Surface of Panel Float ength H-2 A Min. A Max. P (.63) 14.8 (.58) 15.3 (.60) 15.3 (.60) 15.3 (.60) 11.2 (.44) 10 (.39) 1 (.41) 1 (.42) 1 (.42) 0.9 (.036) (.061) (.058) (.125) (.015) Slotted Phillips TORX TORX / Slot Phillips / Slot 0.5 (.02) 5.3 (.21) (.08) 6.9 (.27) (.15) 8.5 (.33) (.21) 10.1 (.40) (.06) 6.1 (.24) (.07) 1.1 (.04) 6 (.24) (.125) 4.8 (.189) (.062) 3.4 (.135) 2.7 (.11) 7.6 (.30) (.189) 6.4 (.250) (.125) 5 (.197) 4.3 (.17) 9.2 (.36) (.250) 7.9 (.312) 4.8 (.189) 6.1 (.26) 5.9 (.23) 1 (.43) (.058) (.125) (.015) 1.8 (.07) 2.7 (.11) 4.3 (.17) 7.6 (.30) 9.2 (.36) (.23) 1 (.43) (.125) 4.8 (.189) (.062) 3.4 (.135) (.062) 4.8 (.189) (.23) 1 (.43) (.189) 6.4 (.250) (.125) 5 (.197) 5.9 (.23) 1 (.43) (.083) 2.9 (.113) 2.2 (.063) 2.9 (.114) (.09) 3.7 (.144) (.063) 2.4 (.094) 3.7 (.146) 4.5 (.176) 0.5 (.020) 1 (.039) 2 (.079) 1.1 (.044) 1 (.039) (.063) 2.6 (.103) 1.7 (.067) 2.4 (.09) 7.2 (.28) (.16) 8.8 (.35) (.22) 1 (.41) (.09) 7.2 (.28) (.16) 8.8 (.35) (.22) 1 (.41) (.16) 8.8 (.35) (.22) 1 (.41) (.22) (.09) 7.2 (.28) (.16) 8.8 (.35) (.22) 1 (.41) (.09) 7.2 (.28) (.16) 8.8 (.35) (.22) 1 (.41) To add a black powder coated finish, change the part number from the table as shown: Change 1 to 5: Change 2 to 6: Change 3 to 7: Part numbers in shaded rows (shown in table) are fully retracting in minimum panel thickness For a smooth knob, change the part number from the table as shown: Change 0 to 1: Change 4 to 5: TORX is a registered trademark of ACUMENT Intellectual Properties, C All screw part numbers shown in table are for a natural knob finish and a knurled knob For black finish and smooth knob options, minimums may apply

15 Captive Screws d knob series 8-32 thread size Designed for hand operation Spring ejected Wide variety of sizes, recesses and installation options s Slotted No. 2 Phillips T25 TORX T25 TORX / No. 2 Phillips / Material and Finish : Press-in: Hardened carbon steel, zinc plate, chromate, plus sealer Flare-in, floating and snap-in: Aluminum, natural : Aluminum, natural or black powder coated Screw: Hardened carbon steel, zinc plated, chromate, plus sealer ACTUA SIZE Height and Screw Projection (Flare-in style shown) Unfastened 1 (.04) Screw projection for TORX and TORX / slot Unfastened Fastened See pages , 543 Notes To ensure you receive SOUTHCO quality parts, look for the segmented circle A Min. A Max. P-2 H-2 s Snap-In To request a quote, please or call us at Thread size Ø 7.9 (.310) Ø 6.7 (.262) Ø 7.3 (.287) Washer (supplied) Ø 10.2 (.400) (.025) TORX is a registered trademark of ACUMENT Intellectual Properties, C

16 455 Snap-In Height Outer Panel Dimensions Screw Projection Beyond Outer Surface of Panel Flange Total B ength Float H-2 A Min. A Max. P (.64) 15.6 (.61) 16 (.63) 15.7 (.62) 11.2 (.44) 10.5 (.41) 11.2 (.44) 11.2 (.44) 0.9 (.036) (.058) (.125) (.015) 0.9 (.058) (.125) (.015) 1.8 (.07) Slotted Phillips TORX TORX / Slot Phillips / Slot 0.5 (.02) 5.6 (.22) (.08) 7.1 (.28) (.15) 8.9 (.35) (.21) 1 (.41) (.070) 1 (.04) 6 (.24) (.126) 4.8 (.189) (.062) 3.4 (.135) 2.8 (.11) 7.6 (.3) (.189) 6.4 (.250) (.125) 5 (.197) 4.3 (.17) 9.2 (.36) (.251) 7.9 (.312) 4.8 (.189) 6.6 (.260) 5.8 (.23) 1 (.43) (.126) 4.8 (.189) (.062) 3.4 (.135) 2.8 (.11) 7.6 (.3) (.17) 9.2 (.36) (.23) 1 (.43) (.17) 9.2 (.36) (.23) 1 (.43) (.189) 6.4 (.250) (.125) 5 (.197) 5.8 (.23) 1 (.43) (.09) (.127) 2.3 (.063) 3.1 (.121) (.09) 4 (.158) (.063) 2.4 (.094) 3.9 (.153) 0.5 (.020) 1 (.039) 2 (.079) 1 (.039) (.063) 2.6 (.103) (.190) 1.1 (.044) 1.7 (.068) (.063) 2.5 (.098) 3.5 (.138) 2.6 (.103) 2.3 (.09) 7.1 (.28) (.15) 8.9 (.35) (.22) 1 (.41) (.09) 7.1 (.28) (.15) 8.9 (.35) (.22) 1 (.41) (.15) 8.9 (.35) (.22) 1 (.41) (.04) 3 (.22) (.11) 7.1 (.28) (.17) 8.9 (.35) (.23) 1 (.41) (.11) 7.1 (.28) (.17) 8.9 (.35) (.23) 1 (.41) (.11) 7.1 (.28) (.17) 8.9 (.35) (.23) 1 (.41) To add a black powder coated finish, change the part number from the table as shown: Change 1 to 5: Change 2 to 6: Part numbers in shaded rows (shown in table) are fully retracting in minimum panel thickness For a smooth knob, change the part number from the table as shown: Change 0 to 1: Change 4 to 5: All screw part numbers shown in table are for a natural knob finish and a knurled knob For black finish and smooth knob options, minimums may apply TORX is a registered trademark of ACUMENT Intellectual Properties, C

17 Captive Screws d knob series thread size Designed for hand operation Spring ejected Wide variety of sizes, recesses and installation options s Slotted No. 2 Phillips T25 TORX T25 TORX / No. 2 Phillips / Material and Finish : Press-in: Hardened carbon steel, zinc plate, chromate, plus sealer Flare-in, floating and snap-in: Aluminum, natural : Aluminum, natural or black powder coated Screw: Hardened carbon steel, zinc plated, chromate, plus sealer ACTUA SIZE Height and Screw Projection (Flare-in style shown) Unfastened 1 (.04) Screw projection for TORX and TORX / slot Unfastened Fastened See pages , 543 Notes A Min. H-2 To ensure you receive SOUTHCO quality parts, look for the segmented circle A Max. P-2 s Snap-In To request a quote, please or call us at Thread size Ø 7.9 (.310) Ø 6.7 (.262) Ø 7.3 (.287) Washer (supplied) TORX is a registered trademark of ACUMENT Intellectual Properties, C Ø 10.2 (.400) (.025)

18 457 Snap-In Screw Projection Outer Panel Beyond Outer Height Dimensions Total B Flange Surface of Panel Float ength H-2 A Min. A Max. P (.64) 15.6 (.61) 16 (.63) 15.7 (.62) 11.2 (.44) 10.5 (.41) 11.2 (.44) 11.2 (.44) 0.9 (.036) (.058) (.125) (.015) (.02) (.058) (.125) (.015) (.02) 1.8 (.070) Slotted Phillips TORX TORX / Slot Phillips / Slot (.02) 5.5 (.22) (.09) 7.2 (.28) (.15) 8.9 (.35) (.21) 10.3 (.41) (.070) 1.2 (.05) 6.3 (.25) (.125) 4.7 (.187) (.062) 3.4 (.135) 2.8 (.11) 7.9 (.31) (.189) 6.4 (.250) (.125) 5 (.197) 4.4 (.17) 9.5 (.37) (.251) 7.9 (.312) 4.8 (.187) 6.6 (.260) 6 (.24) 11.1 (.44) (.125) 4.8 (.187) (.062) 3.4 (.135) 2.8 (.11) 7.9 (.31) (.17) 9.5 (.37) (.24) 11.1 (.44) (.17) 9.5 (.37) (.24) 11.1 (.44) (.189) 6.4 (.250) (.125) 5 (.197) 6 (.24) 11.1 (.44) (.090) (.127) 2.3 (.063) 3.1 (.122) (.09) 4 (.158) (.063) 2.4 (.094) 3.9 (.153) 4.8 (.190) 0.5 (.020) 1 (.039) 2 (.079) 1.1 (.044).9 1 (.039) (.063) 2.6 (.103) (.04) 1.7 (.068) (.063) 2.5 (.098) 3.5 (.138) 2.6 (.103) 2.3 (.09) 7.1 (.28) (.16) 8.8 (.35) (.22) 1 (.41) (.09) 7.1 (.28) (.16) 8.8 (.35) (.22) 1 (.41) (.16) 8.8 (.35) (.22) 1 (.41) (.04) 5.6 (.22) (.11) 7.1 (.28) (.17) 8.8 (.35) (.23) 1 (.41) (.11) 7.1 (.28) (.17) 8.8 (.35) (.23) 1 (.41) (.11) 7.1 (.28) (.17) 8.8 (.35) (.23) 1 (.41) To add a black powder coated finish, change the part number from the table as shown: Change 1 to 5: Change 2 to 6: Part numbers in shaded rows (shown in table) are fully retracting in minimum panel thickness For a smooth knob, change the part number from the table as shown: Change 0 to 1: Change 4 to 5: All screw part numbers shown in table are for a natural knob finish and a knurled knob For black finish and smooth knob options, minimums may apply TORX is a registered trademark of ACUMENT Intellectual Properties, C

19 Captive Screws d knob series 1/4-20 thread size Designed for hand operation Spring ejected Wide variety of sizes, recesses and installation options s Slotted No. 2 Phillips T30 TORX T30 TORX / No. 2 Phillips / Material and Finish : Press-in: Hardened carbon steel, zinc plate, chromate, plus sealer Flare-in and : Aluminum, natural : Aluminum, natural or black powder coated Screw: Hardened carbon steel, zinc plated, chromate, plus sealer ACTUA SIZE Height and Screw Projection (Flare-in style shown) Unfastened 1 (.04) Screw projection for TORX and TORX / slot Unfastened Fastened See pages , 543 Notes A Min. H-2 To ensure you receive SOUTHCO quality parts, look for the segmented circle A Max. P-2 s Ø 14.7 (.58) Ø 14.7 (.58) Ø 14.7 (.58) To request a quote, please or call us at Thread Size Ø 9.4 (.372) Ø 8.1 (.319) Washer (supplied) Ø 11.9 (.470) Ø 8.9 (.349) (.025) TORX is a registered trademark of ACUMENT Intellectual Properties, C

20 459 Height Outer Panel Dimensions Screw Projection Beyond Outer Surface of Panel Flange Total B ength Float H-2 A Min. A Max. P-2 20 (.79) 19.3 (.76) 20 (.79) 13.4 (.53) 12.7 (.50) 13.3 (.52) 0.9 (.036) (.058) (.126) 4.8 (.188) 6.4 (.251) (.058) (.126) 4.8 (.189) (.063) (.125) 4.8 (.189) 6.4 (.250) 7.9 (.312) (.125) 4.8 (.189) 6.4 (.250) (.063) 2.4 (.094) (.015) (.062) (.125) 4.8 (.189) (.015) (.062) (.125) 2.3 (.090) 3.1 (.122) 3.9 (.153) (.09) 1.8 (.070) 3.4 (.135) 5 (.197) 6.6 (.260) 1.8 (.070) 3.4 (.135) 5 (.197) (.127) 4 (.158) 4.8 (.190) Slotted Phillips TORX TORX / Slot Phillips / Slot 0.5 (.02) 7.1 (.28) (.08) 8.7 (.34) (.15) 10.3 (.41) (.21) 11.9(.47) (.05) 7.8 (.31) (.11) 9.4 (.37) (.17) 11 (.43) (.24) 12.6 (.50) (.11) 9.4 (.37) (.17) 11 (.43) (.24) 12.6 (.50) (.17) 11 (.43) (.24) 12.6 (.50) (.24) 12.6 (.50) (.08) 8.8 (.35) (.15) 1 (.41) (.21) 12 (.47) (.08) 8.8 (.35) (.15) 1 (.41) (.21) 12 (.47) (.15) 1 (.41) (.21) 12 (.47) Part numbers in shaded rows (shown in table) are fully retracting in minimum panel thickness To add a black powder coated finish, change the part number from the table as shown: Change 1 to 5: Change 2 to 6: For a smooth knob, change the part number from the table as shown: Change 0 to 1: Change 4 to 5: All screw part numbers shown in table are for a natural knob finish and a knurled knob For black finish and smooth knob options, minimums may apply TORX is a registered trademark of ACUMENT Intellectual Properties, C

21 460 4C Captive Screws Prism series M3, M4 and M5 thread size Designate access points with color Color match captive screws to your industrial design High strength screw for use with high torque drivers Knurled and smooth knobs available s M3 No. 2 Phillips Ø 9.7 (.382) T10 TORX / Slot combination ACTUA SIZE M4 and M5 No. No. 2 Phillips Phillips / / Slot combination (.511) T25 TORX / Slot combination ACTUA SIZE Material and Finish : PC/ABS Screw: Hardened carbon steel, zinc plate, chromate, plus sealer Spring: 300 series stainless steel, passivated Standoff: Press-in: Carbon steel, zinc plate, chromate, plus sealer PCB: Stainless steel Flare-in and : Aluminum, natural Performance Details Flammability Rating: U94-V0 s M3 Screw Wing Option M4 and M5 Standoff Ø 6.3 (.250) Ø 5.5 (.217) 20 (.787) 1 (.04) Ø 6.2 (.245) Ø 4.6 (.181) P.C. Board (.06) Ø 6.3 (.248) Ø 6.1 (.240) See pages , 543 Notes Press-in: Maximum panel hardness 170 HV (85 HRB) See page 480 for details on ATCA compliant captive screws. To ensure you receive SOUTHCO quality parts, look for the segmented circle. Ø 8.7 (.344) Ø 7.9 (.311) Height and Screw Projection (Press-in style shown) 1.8 (.070) Ø 8.7 (.344) Ø 6.7 (.262) Washer (supplied) Ø 10.2 (.400) Ø 7.3 (.287) (.025) To request a quote, please or call us at F* Wing Option H-2 P-2 TORX is a registered trademark of ACUMENT Intellectual Properties, C

22 461 M3 Thread Size P.C. Board M4 Thread Size M5 Thread Size (shown in table) 000 Black 014 Green Outer Panel Dimensions A Min. 0.9 (.036) (.063) Outer Panel Dimensions A Min. 0.9 (.036) (.060) (.063) A Max. 008 Blue Your Color Contact Southco B (.058) (.063) 2.4 (.094) Outer Panel Dimensions A Min. 0.9 (.036) (.06) A Max. A Max. (.016) 3.1 (.122) 3.9 (.153) B 4 (.158) 4.8 (.190) (.058) (.063) B (.016) 3.1 (.122) 013 Red Phillips Phillips / Slot TORX /Slot Screw Projection Beyond Outer Surface Of Panel 4C-PS-M4-1P0-K000 4C-TS-M4-1P0-K (.02) 5.6 (.22) C-PS-M4-2P0-K000 4C-TS-M4-2P0-K000 2 (.08) 7.1 (.28) (.64) 4C-PS-M4-1F1-K000 4C-TS-M4-1F1-K000 (.02) 5.6 (.22) C-PS-M4-2F1-K000 4C-TS-M4-2F1-K (.08) 7.1 (.28) (.64) 4C-PS-M4-3T2-K000 4C-TS-M4-3T2-K (.15) 8.8 (.35) 4C-PS-M4-4T2-K000 4C-TS-M4-4T2-K (.21) 1 (.41) 4C-PS-M4-3T3-K000 4C-TS-M4-3T3-K (.15) 8.8 (.35) 4C-PS-M4-4T3-K000 4C-TS-M4-4T3-K (.21) 1 (.41) Phillips / Slot TORX / Slot TORX / Slot Screw Projection Beyond Outer Surface of Panel 4C-PH-M3-1P0-K000 4C-TS-M3-1P0-K (.15) 1 4C-PH-M3-2P0-K000 4C-TS-M3-2P0-K (.10) 5.4 (.21) 4C-PH-M3-1B0-K000 4C-TS-M3-1B0-K000 (.06) 3.8 (.15) 10.9 (.43) 4C-PH-M3-1F1-K000 4C-TS-M3-1F1-K (.15) 1 (.058) (.016) 4C-PH-M3-2F1-K000 4C-TS-M3-2F1-K000 (.06) 5.4 (.21) Specify Wing : (M3, Press-in, Flare-in only) To indicate Wing option, change K to W of the part number Example: 4C-PH-M3-1P0-K000, Round 4C-PH-M3-1P0-W000, Wing Notes: *F indicates the maximum float in the unfastened position. For panels thinner than 0.9 (.036), contact Southco. TORX is a registered trademark of ACUMENT Intellectual Properties, C Height Total Float Panel Preparation P-2 H-2 F* Ø D Ø Z Screw Projection Beyond Outer Surface of Panel Height 4C-PS-M5-1P0-K000 4C-TS-M5-1P0-K000 4C-PS-M5-2P0-K000 4C-TS-M5-2P0-K000 (.2) 2 (.08) 5.6 (.22) 7.2 (.28) 16.4 (.65) 4C-PS-M5-1F1-K000 4C-TS-M5-1F1-K (.02) 5.6 (.22) C-PS-M5-2F1-K000 4C-TS-M5-2F1-K (.08) 7.2 (.28) (.65) 4 4C-PS-M5-3T2-K000 4C-TS-M5-3T2-K (.15) 8.9 (.35) 16.3 (.158) 4C-PS-M5-4T2-K000 4C-TS-M5-4T2-K (.21) 10.5 (.41) (.64) 16.2 (.64) Height (.44) 0.7 (.02) 2.3 (.09) Total Float (.315 ) (.266 ) ( ) Panel Preparation (.173 ) 4.2 ( ) P-2 H-2 F* Ø D Ø Z (.44) Total Float (.09) (.315 ) (.266 ) (.346 ) Panel Preparation P-2 H-2 F* Ø D Ø Z 8.6 (.34) 8.5 (.33) 8.6 (.34) (.219 ) ( ) ( ) (.125 ) ( ) ( ) To indicate color, change the last three digits of the part number. For knob style, K = knurled and N = smooth. For smooth knob change K to N. Example: 4C-PS-06-1P0-K000, black, knurled 4C-PS-06-1P0-N013, red, smooth (.205 ) (.191 )

23 462 4C Captive Screws Prism series 4-40, 6-32 and thread size Designate access points with color Color match captive screws to your industrial design High strength screw for use with high torque drivers Knurled, smooth and wing knobs available Material and Finish : PC/ABS Screw: Hardened carbon steel, zinc plate, chromate, plus sealer Spring: 300 series stainless steel, passivated Standoff: Press-in: Carbon steel, zinc plate, chromate, plus sealer PCB: Stainless steel Flare-in and : Aluminum, natural Performance Details Flammability Rating: U94-V0 See pages , 543 Notes Press-in: Maximum panel hardness 170 HV (85 HRB) To ensure you receive SOUTHCO quality parts, look for the segmented circle. TORX is a registered trademark of ACUMENT Intellectual Properties, C To request a quote, please or call us at s 4-40 Ø 9.7 (.382) 20 (.787) 6-32 Ø 1 (.453) ACTUA SIZE T15 TORX / Slot combination 22 (.866) s 4-40 P.C. Board No. 2 Phillips Wing Option Screw T10 TORX / ACTUA Slot combination SIZE Ø 7.1 (.281) Ø 6.3 (.247) Ø 8.7 (.344) Ø 7.9 (.311) Height and Screw Projection (Press-in style shown) F* Standoff Ø 6.3 (.250) Ø 5.5 (.217) No. 2 Phillips / Slot combination Wing Option 1 (.04) Ø 6.2 (.245) Ø 4.6 (.181) 1.8 (.070) Ø 7 (.276) Ø 5.3 (.209) 1.8 (.070) Ø 8.7 (.344) Ø 6.7 (.262) Wing Option Washer (supplied) Ø 10.2 (.400) H-2 No. 2 Phillips / Slot combination P.C. Board (.511) ACTUA SIZE (.06) Ø 6.3 (.248) Ø 6.1 (.240) (.06) Ø 7.1 (.281) Ø 6.9 (.27) Ø 7.3 (.287) (.025) T25 TORX / Slot combination P-2

24 Thread Size P.C. Board 6-32 Thread Size P.C. Board Thread Size (shown in table) 000 Black 014 Green Outer Panel Dimensions A Min. 0.9 (.036) (.063) Outer Panel Dimensions A Min. 0.9 (.036) (.06) (.059) Outer Panel Dimensions A Min. 0.9 (.036) (.058) (.063) A Max. A Max. A Max. B (.125) (.063) 2.4 (.094) (.016) 3.1 (.122) 3.9 (.153) B 1.8 (.070) 4 (.158) 4.8 (.190) Phillips / Slot Phillips / Slot TORX / Slot TORX / Slot Screw Projection Beyond Outer Surface of Panel 4C-PS-06-1P0-K000 4C-TS-06-1P0-K (.20) C-PS-06-2P0-K000 4C-TS-06-2P0-K (.09) 6.6 (.26) (.61) C-PS-06-1B0-K000 4C-TS-06-1B0-K (.07) 6.2 (.25) (.57) (.125) B (.059) 008 Blue (.016) Your Color Contact Southco (.016) Phillips TORX / Slot Screw Projection Beyond Outer Surface of Panel 4C-PH-04-1P0-K000 4C-TS-04-1P0-K000 4C-PH-04-2P0-K000 4C-TS-04-2P0-K (.10) 3.8 (.15) 5.3 (.21) 1 4C-PH-04-1B0-K000 4C-TS-04-1B0-K000 (.06) 3.8 (.15) C-PH-04-2B0-K000 4C-TS-04-2B0-K (.13) 5.5 (.22) (.43) 4C-PH-04-1F1-K000 4C-TS-04-1F1-K (.15) 1 4C-PH-04-2F1-K000 4C-TS-04-2F1-K (.10) 5.4 (.21) 4C-PS-06-1F1-K000 4C-TS-06-1F1-K000 5 (.20) C-PS-06-2F1-K000 4C-TS-06-2F1-K (.09) 6.6 (.26) (.61) 013 Red Screw Projection Beyond Outer Surface of Panel Height Notes: *F indicates the maximum float in the unfastened position. For panels thinner than 0.9 (.036), contact Southco. TORX is a registered trademark of ACUMENT Intellectual Properties, C Total Float Panel Preparation P-2 H-2 F* Ø D Ø Z 4C-PS-10-1P0-K000 4C-TS-10-1P0-K (.02) 5.6 (.22) C-PS-10-2P0-K000 4C-TS-10-2P0-K000 2 (.08) 7.1 (.28) 4C-PS-10-1F1-K000 4C-TS-10-1F1-K000 (.02) 5.6 (.22) C-PS-10-2F1-K000 4C-PS-10-3T2-K000 4C-TS-10-2F1-K000 4C-TS-10-3T2-K (.08) 3.8 (.15) 7.1 (.28) 8.8 (.35) 16.3 (.64) 4C-PS-10-4T2-K000 4C-TS-10-4T2-K (.21) 1 (.41) C-PS-10-3T3-K000 4C-TS-10-3T3-K (.15) 8.8 (.35) (.44) 4C-PS-10-4T3-K000 4C-TS-10-4T3-K (.21) 1 (.41) Height Height Total Float (.02) (.02) 2.3 (.09) ( ) ( ) ( ) Panel Preparation P-2 H-2 F* Ø D Ø Z 11.3 (.44) 10 (.39) 11.3 (.44) Total Float (.250 ) ± 0.1 (.252 ±.004) (.213 ) Panel Preparation P-2 H-2 F* Ø D Ø Z 8.6 (.34) 8.5 (.33) 8.6 (.34) Specify Wing : (4-40 and 6-32, Press-in and Flare-in only) To indicate Wing option, change K to W of the part number Example: 4C-PS-06-1P0-K000, Round 4C-PS-06-1P0-W000, Wing ( ) (.220 ) (.187 ) (.125 ) (.220 ) (.125 ) (.146 ) (.146 ) (.146 ) ( ) ( ) To indicate color, change the last three digits of the part number. For knob style, K = knurled and N = smooth. For smooth knob change K to N. Example: 4C-PS-06-1P0-K000, black, knurled 4C-PS-06-1P0-N013, red, smooth

25 Captive Screws Restricted access series M4 and M5 thread size Reduces risk of unauthorized access Meets U-1950, IEC 950 and EN Hand operation to secure with tool-only removal Material and Finish : Press-in: Hardened carbon steel, zinc plate, chromate, plus sealer Flare-in and : Aluminum, natural : Aluminum, natural or black organic coating Screw: Hardened carbon steel, zinc plate, chromate, plus sealer See pages , 543 s Slotted No. 2 Phillips T25 TORX ACTUA SIZE Height and Screw Projection (Press-in style shown) Unfastened Unfastened Fastened H-2 A Min. A Max. P-2 s Ø 15 (.59) Ø 15 (.59) Flare-in Ø 15 (.59) To request a quote, please or call us at Thread Size Ø 7.9 (.31) Ø 6.7 (.26) Washer (supplied) Ø 6.7 (.26) Ø 10 (.40) Ø 7.3 (.29) TORX is a registered trademark of ACUMENT Intellectual Properties, C

26 465 M4 Thread Size Outer Panel Flange Screw Projection Beyond Height Dimensions Dimension B* ength Outer Surface of Panel H-2 A Min. A Max. P-2 Slotted Phillips TORX (.22) (.73) 18 (.70) 18 (.70) 14 (.55) (.55) 0.9 (.036) 2.3 (.09) 7.2 (.28) (.15) 8.7 (.34) (.21) 10.3 (.41) (.058) (.125) (.023) 1.8 (.07) 1.4 (.06) 6.2 (.24) (.125) 4.8 (.188) (.062) 3.4 (.14) 3.1 (.12) 7.9 (.31) (.12) 7.9 (.31) (.058) (.125) (.023) 1.8 (.07) 4.1 (.16) 8.9 (.35) (.24) 10.9 (.43) (.09) 7.2 (.28) (.001) 2.3 (.09) (.13) 3.4 (.13) 8.2 (.32) (.21) 10.2 (.40) (.09) 7.2 (.22) (.063) 3.1 (.12) 4 (.16) 3.4 (.13) 8.2 (.32) (.21) 10.2 (.40) M5 Thread Size 18.5 (.73) 18 (.70) 18 (.70) 14 (.55) (.55) (.22) (.036) 2.3 (.09) 7.2 (.28) (.15) 8.7 (.34) (.21) 10.3 (.41) (.058) (.125) (.023) 1.8 (.07) 1.4 (.06) 6.2 (.24) (.125) 4.8 (.188) (.062) 3.4 (.14) 3.1 (.12) 7.9 (.31) (.12) 7.9 (.31) (.058) (.125) (.023) 1.8 (.07) 4.1 (.16) 8.9 (.35) (.24) 10.9 (.43) (.125) 4.8 (.188) (.062) 3.4 (.14) 4.1 (.16) 8.9 (.35) (.24) 10.9 (.43) (.09) 7.2 (.28) (.001) 2.3 (.09) (.13) 3.4 (.13) 8.2 (.32) (.21) 10.2 (.40) (.09) 7.2 (.28) (.063) 3.1 (.12) 4 (.16) 3.4 (.13) 8.2 (.32) (.21) 1 (.40) (.063) 2.4 (.094) 3.9 (.15) 4.8 (.19) 3.4 (.15) 8.2 (.35) (.21) 10.2 (.40) Part numbers in shaded rows (shown in table) are fully retracting in minimum panel thickness To add a black finish, change the part number from the table as shown: Change 2 to 6: TORX is a registered trademark of ACUMENT Intellectual Properties, C All screw part numbers shown in table are for a natural finish For black finish minimums may apply

27 Captive Screws Restricted access series 6-32 and thread size Reduces risk of unauthorized access Meets U-1950, IEC 950 and EN Hand operation to secure with tool-only removal Material and Finish : Press-in: Hardened carbon steel, zinc plate, chromate, plus sealer Flare-in and : Aluminum, natural : Aluminum, natural or black organic coating Screw: Hardened carbon steel, zinc plate, chromate, plus sealer s Slotted No. 2 Phillips T15 TORX T25 TORX ACTUA SIZE Height and Screw Projection (Press-in style shown) Unfastened Unfastened Fastened H-2 See pages , 543 A Min. A Max. P-2 s Ø 15 (.59) Ø 15 (.59) Ø 15 (.59) To request a quote, please or call us at Thread size Ø 7.9 (.31) Ø 6.7 (.26) Washer (supplied) Ø 7.3 (.29) Ø 6.7 (.26) Ø 10 (.40) TORX is a registered trademark of ACUMENT Intellectual Properties, C

28 Thread Size Outer Panel Flange Screw Projection Beyond Height Dimensions Dimension B* ength Outer Surface Of Panel H-2 A Min. A Max. P-2 Slotted Phillips TORX 0.5 (.02) 5.3 (.21) (.73) 18 (.70) 18 (.70) Thread Size 18.5 (.73) 18 (.70) 18 (.70) 14 (.54) (.54) 14 (.54) (.54) 0.9 (.036) 2.3 (.09) 6.9 (.27) (.15) 8.3 (.33) (.21) 10.1 (.41) (.058) (.125) (.023) 1.8 (.07) 1.4 (.06) 6.2 (.24) (.125) 4.8 (.189) (.062) 3.4 (.14) 3.1 (.12) 7.9 (.31) (.12) 7.9 (.31) (.058) (.125) (.023) 1.8 (.07) 4.1 (.16) 8.9 (.35) (.24) 10.9 (.43) (.125) 4.8 (.189) (.062) 3.4 (.14) 4.1 (.16) 8.9 (.35) (.24) 10.9 (.43) (.09) 7.2 (.28) (.001) 2.3 (.09) (.13) 3.4 (.13) 8.2 (.32) (.21) 10.2 (.40) (.09) 7.2 (.22) (.063) 3.1 (.12) 4 (.16) 3.4 (.13) 8.2 (.32) (.21) 10.2 (.40) (.063) 2.4 (.094) 3.9 (.15) 4.8 (.19) 3.4 (.13) 8.2 (.32) (.21) 10.2 (.40) (.22) (.036) 2.3 (.09) 7.2 (.28) (.15) 8.7 (.34) (.21) 10.3 (.41) (.058) (.125) (.023) 1.8 (.07) 1.4 (.06) 6.2 (.24) (.125) 4.8 (.189) (.062) 3.4 (.14) 3.1 (.12) 7.9 (.31) (.12) 7.9 (.31) (.058) (.125) (.023) 1.8 (.07) 4.1 (.16) 8.9 (.35) (.24) 10.9 (.43) (.125) 4.8 (.189) (.062) (.14) 4.1 (.16) 8.9 (.35) (.24) 10.9 (.43) (.09) 7.2 (.28) (.001) 2.3 (.09) (.13) 3.4 (.13) 8.2 (.32) (.21) 10.2 (.40) (.09) 7.2 (.28) (.063) 3.1 (.12) 4 (.16) 3.4 (.13) 8.2 (.32) (.21) 10.2 (.40) (.063) 2.4 (.094) 3.9 (.15) 4.8 (.19) 3.4 (.13) 8.2 (.32) (.21) 10.2 (.40) Part numbers in shaded rows (shown in table) are fully retracting in minimum panel thickness To add a black finish, change the part number from the table as shown: Change 2 to 6: TORX is a registered trademark of ACUMENT Intellectual Properties, C All screw part numbers shown in table are for a natural finish For black finish minimums may apply

29 468 47/4C Captive Screws Panel preparation and installation 1. Prepare panel as shown. Top edge of hole should be sharp 2. Press captive screw into panel until ferrule is installed as shown closer to the panel edge requires a fixture to constrain the panel edges Notes Recommended minimum distance from edge of panel to centerline of hole is x Ø D See page 543 for additional installation guidelines A Min. Clearance hole Ø Z Ø D Flat surface Edge of hole must be sharp. Do not chamfer Back-up Tool (not supplied) Thread Size M3 or 4-40 M3.5 or 6-32 M4 or 8-32 M5 or M6 or 1/4-20 Ø D (.219 ) (.250 ) 8 +0 (.315 ) 8 +0 (.315 ) (.375 ) Clearance Hole Ø Z ( ) (.125) 3.7 (.146) 4.4 (.173) 5.2 (.205) 6.2 (.260) Notes: For use in material hardnesses RB85 or less, such as low carbon steels that are half hard or softer, stainless steels in the annealed condition and aluminum Performance Details Pullout force: 360 N (80 lbf) Side load against unfastened knob: 200 N (45 lbf) 1. Prepare panel as shown. 2. Use pilot lead-in to guide assembly into hole and press knurl into panel until ferrule shoulder contacts surface P.C. Board Ø D A. Min.* Flat surface Do not chamfer edge Thread Size M3 or 4-40 M3.5 or 6-32 Ø D (.219 ) ±1 (.252±.004) Clearance Hole Ø Z ( ) (.125) 3.7 (.146) Notes Strength data based on drilled holes in G-10 P.C. Board Clearance hole Ø Z Back-up Tool (not supplied) 1. Prepare panel as shown. 2. Install tool in suitable press. Only IGHT pressure will be required 3. Insert screw assembly into prepared hole in panel 4. Place work under press, center tool over screw thread and flare ferrule into counter-sink in panel. Use IGHT pressure Force: 1600 N (350 lbf) to 2500 N (550 lbf) force depends on thread size Ø D A Min. to A Max (.47) Tool Door Screw assembly 90 ±2 B±0.1 (.005) 102 (4.0) Smooth back-up surface Thread Size Ø D Tool M3 or 4-40 M3.5 or 6-32 M4 or M5 M6 or 1/ (.187 ) (.213 ) (.266 ) (.266 ) (.266 ) (.323 )

30 469 Panel preparation 1 Gap Panel preparation 2 B Min Thread Size Tool Part Number M3 or M3.5 or M4 or M M6 or 1/ B A Min. to A Max. Thread Size Ø D ( ) B Min Counterbore Min. Ø C M3 or (.250) 9.4 (.375) M3.5 or (.283) 10.5 (.413) M4 or (.346) 12 (.469) M5 or (.346) 12 (.469) M6 or 1/ (.413) 13.5 (.531) Ø D Ø D Ø C Tool Washer Door Screw subassembly A Min. to A Max. A Min. to A Max. 102 (4.00) 12.7 (.50) Smooth back-up surface and Snap-in style: Panel preparation 1: Requires space between inner and outer panels. Specify the fastener for panel thickness A to fall between the range A Minimum to A Maximum: gap = B - A outer panel thickness Panel preparation 2: Counter bore the panel (B = Minimum panel thickness) to a thickness (A) between the range of A Minimum and A Maximum Minimum bore depth = panel thickness - A Maximum For gap = Ø, panel thickness must be to B value (before counterbore) for the given part number Notes B and A Maximum values are provided in the corresponding fastener selection tables for each part number Snap-In If holes are drilled, top edge of hole should be chamfered Panel preparation 1 Gap B Ø D A Min. to A Max. Panel preparation 2 B Min A Min. to A Max. Ø D A Min. to A Max. Thread Size Ø D (±.002) Counterbore Min. Ø C M3.5 or (.250) 7.5 (.295) M4 or (.250) 7.5 (.295) M5 or (.250) 7.5 (.295) B Min. Sharp edge (die side) Ø C Dull edge (punch side) To request a quote, please or call us at

31 SM Captive Screws F* Total Float of Screw in d knob series Surface Mount Technology (SMT) H-2 P-2 For installation to PC Board material utilizing surface mount technology Smooth knob meets U-1950 Designed for hand operation Spring ejected Variety of sizes, recesses Material and Finish : Steel, Tin plated : Aluminum, natural Screw: Hardened carbon steel, zinc plated, chromate, plus sealer Internal spring: 300 series stainless steel passivated Plug: Silicone rubber Visit for additional installation guidelines To ensure you receive SOUTHCO quality parts, look for the segmented circle. s TORX / Slot T10 TORX / (M3,4-40) T15 TORX / Slot (6-32) Height and Screw Projection Unfastened Fastened F* Total Float of Screw in Screw 47 Captive Screws d knob series - SMT Screw Phillips / Slot Ø B H-2 P-2 * Value represents float in unfastened position Notes:, P-2 Screw Projection measured from the top side of panel Specify Package Indicate package option with last digit of the part number Example 47-SM-1311-K-R: Reel Package (as shown in table) 47-SM-1311-K-T: Tray Package Ø B Packed with Plug No. 1 Phillips / Slot (M3,4-40) F* Total Float of No. 2 Phillips / Slot (6-32) Screw in PC Board Preparation ACTUA SIZE Ø J Polyimide tape patch H-2 P-2 on top surface of screw Soldering Pad surface area for vacuum pick up Ø N Screw Polyimide tape patch on top surface of screw for vacuum pick up Packed with Plug (.063) Min. Ø D Ø K Ø E Soldering Pad PC Board Ø J Screw as Shipped in Reel Pack or Tray Pack Ø E Thread Size M3 x (Reel package shown) Panel Preparation Knurled Head Smooth Head H-2 P-2 ØB ØJ ØE F* Ø K Ø N Phillips / Slotted TORX / Slotted Phillips / Slotted TORX / Slotted Ø D 47-SM-3311-K-R 47-SM-3411-K-R 47-SM-3311-N-R 47-SM-3411-N-R 1.4 (.05) 4.4 (.17) 47-SM-3321-K-R 47-SM-3421-K-R 47-SM-3321-N-R 47-SM-3421-N-R (.09) 5.2 (.20) /-0 47-SM-1311-K-R 47-SM-1411-K-R 47-SM-1311-N-R 47-SM-1411-N-R (.33) 1.4 (.05) 4.4 (.17) (.42) (.217) (.30) (.22) (.34) ( /-.000) 47-SM-1321-K-R 47-SM-1421-K-R 47-SM-1321-N-R 47-SM-1421-N-R 2.2 (.09) 5.2 (.20) 47-SM-2311-K-R 47-SM-2411-K-R 47-SM-2311-N-R 47-SM-2411-N-R (.22) /-0 47-SM-2321-K-R 47-SM-2421-K-R 47-SM-2321-N-R 47-SM-2421-N-R (.61) (.42) 2.3 (.09) 7.1 (.28) (.244) (.32) (.25) (.40) ( /-.000) Other options available. For complete details on variety, part numbers, installation and specification, go to TORX is a registered trademark of ACUMENT Intellectual Properties, C

32 H-2 4C-SM Captive Screws Prism series Surface Mount Technology (SMT) P s No. 2 Phillips (M3,4-40) No. 2 Phillips / Slot (6-32) Height and Screw Projection Unfastened Specify Package Indicate package option with last digit of the part number Example 4C-SM-1111-N000-R, Reel Package (as shown in table) 4C-SM-1111-N000-T, Tray Package Fastened F* Value represents float in unfastened position Notes:, P-2 Screw Projection measured from the top side of panel Thread Size M3 x Wing Option Ø B F* Total Float of Screw in W Wing Option Screw T10 TORX / (M3,4-40) T15 TORX / (6-32) 000 Black 008 Blue 013 Red 014 Green Your Color Contact Southco H-2 P-2 Standoff Specify Color To indicate Color, change the three digits of the part number indicated below Example 4C-SM-1111-K000-R, black 4C-SM-1111-K008-R, blue PC Board Preparation Soldering Pad surface area (.063) Ø D Minimum Ø N Ø K Soldering Pad PC Board Screw as Shipped in Reel Pack or Tray Pack Polyimide tape patch on top surface of screw for vacuum pick up Packed with Plug Specify Wing Option To indicate Wing, change the K or N to W of the part number Example 4C-SM-1111-K000-R, Round 4C-SM-1111-W008-R, Wing For installation to PC Board material utilizing surface mount technology Designate access points with color Color match captive screws to your industrial design High strength screw for use with high torque drivers Material and Finish Standoff: Steel, Tin plated : High heat resistant plastic Screw: Hardened carbon steel, zinc plated, chromate, plus sealer Internal spring: 300 series stainless steel passivated Plug: Silicone rubber Visit for additional installation guidelines To ensure you receive SOUTHCO quality parts, look for the segmented circle (Reel package shown) Knurled Head Smooth Head H-2 P-2 Ø B Ø J Ø E F* Ø K Ø N W Phillips TORX / Slotted Phillips TORX / Slotted 4C-SM-3111-K000-R 4C-SM-3411-K000-R 4C-SM-3111-N000-R 4C-SM-3411-N000-R (.06) 3.7 (.15) 4C-SM-3121-K000-R 4C-SM-3421-K000-R 4C-SM-3121-N000-R 4C-SM-3421-N000-R (.13) 5.5 (.22) C-SM-1111-K000-R 4C-SM-1411-K000-R 4C-SM-1411-N000-R 4C-SM-1411-N000-R (.43) (.34) (.06) 3.7 (.15) (.38) (.217) (.30) (.22) (.34) 4C-SM-1121-K000-R 4C-SM-1421-K000-R 4C-SM-1421-N000-R 4C-SM-1421-N000-R 3.3 (.13) 5.5 (.22) Phillips / Slotted TORX /Slotted Phillips / Slotted TORX /Slotted 4C-SM-2311-K000-R 4C-SM-2411-K000-R 4C-SM-2311-N000-R 4C-SM-2411-N000-R (.004) 4.6 (.18) C-SM-2321-K000-R 4C-SM-2421-K000-R 4C-SM-2321-N000-R 4C-SM-2421-N000-R (.64) (.46) 1.8 (0.7) 6.1 (.24) (.244) (.32) (.25) (.40) Ø J Ø E ACTUA SIZE 20 (.7878) 22 (.866) Panel Preparation Ø D /-0 ( /-.000) /-0 ( /-.000) TORX is a registered trademark of ACUMENT Intellectual Properties, C Other options available. For complete details on variety, part numbers, installation and specification, go to

33 478 47/4C Captive Screws ATCA captive screws M3 thread No. 2 Phillips recess Color match available Metal Version Ø 1 (.453) ATCA Material and Finish Screw, ferrule and internal spring stainless steel, knob aluminum or PC/ABS Performance Details Flammability rating: U94-V0 ATCA R3.0 compliant screw F* H-2 ACTUA SIZE Please refer to installation drawings on for reference on dimensions B*, Ø D* and Ø Z* F* indicates maximum float in the unfastened position Overmolded Version P-2.4 (.530).4 (.530) Specifying Color: To indicate color, change the last three digits of the part number. Example: PO-K000, black P0-K013, red Ø 6.6 (.260) 14.3 (0.56) Ø 6.6 (.260) Ø 8.9 (.350) Ø 8.9 (.350) Ø 5.86 (.231) Ø 4.99 (.196) To request a quote, please or call us at Black 008 Blue 013 Red 014 Green Your color (contact Southco) Series ATCA compliant (Metal Version) ATCA compliant (Overmolded Version) Method Press-in Flare-in Press-in Flare-in Panel Thickness Panel Preparation H-2 P-2 F* A Min. A Max. B* No. 2 Phillips Ø D* Ø Z* 0.9 (.036) 0.9 (.036) P0 (.060) (.016) F P0-K000 (.060) (.016) F1-K (.56) 14.3 (.56) 14.3 (.56) 14.3 (.56) 10.1 (.40) 10.1 (.40) 10.1 (.40) 10.1 (.40) 1.0 (.39) 1.0 (.39) 1.0 (.39) 1.0 (.039) 5.0 (.20) 5.0 (.20) 5.0 (.20) 5.0 (.20) 1 (.039) 1 (.039) 1 (.039) 1 (.039) 5.95 ±0.04 (.234±.002) (.20-0 ) 5.95 ±0.04 (.234±.002) (.20-0 ) ( ) ( ) ( ) ( )

34 543 Guidelines for SOUTHCO Self-Clinching products Self-clinching product installation is offered on these SOUTHCO products, making them easy-to-use captive panel fasteners: Captive Screws Receptacles for Quarter-turn Fasteners Receptacles for Fast-lead Thread Screws When pressed into a properly prepared hole, self-clinching captive fasteners cold-flow (move) the panel material into the retaining groove of the fastener. This material then retains the fastener in the panel. Before installation Correct installation Panel Successful press-in installations depend on: Material: The hardness of the panel material must not exceed SOUTHCO recommendations. If the panel is too hard, the fastener will not install correctly. Holes: Mounting holes may be drilled, punched, or cast. be sharp but with no broken edges. Do not chamfer or debur edge. Area of material that moves into groove with a small clearance to minimize Panel the rollover and fracture angle. Mounting hole diameter at the panel surface on Mounting hole Punch side the side on which the fastener will Rollover of panel be installed. The diameter must be Material within SOUTHCO specifications for thickness that product. Die side of panel - If the hole is too large, not enough material will flow into the retaining groove and the fastener may not be retained adequately. - If the hole is too small, the fastener will not fit and installation may become difficult and unsafe. distance is x the diameter of the mounting hole, unless otherwise indicated. Spring-loaded Plungers Captive Nuts Threaded Inserts - Installing too close to the edge will cause the material to flow in the opposite direction, deforming the edge of the panel. To install closer to the edge, you may need to restrain the panel edge. Panel edge Mounting hole diameter x Ø Min. Panel Centerline of mounting hole Panel Thickness: The thickness of the panel at the mounting hole location must meet or exceed Southco s stated minimum recommendations. If the material is too thin, panel deformation and/or damage to the fastener may result. is fast and easy if you follow these tips: How to install: Use the recommended force where noted and a proper back-up tool. - use any parallel-acting press - use a punch whose diameter is larger than the head of the fastener Force: Proper installation requires an even distribution of adequate force. It does not depend on the distance the fastener is pressed into the panel. - Southco does not recommend using a hammer. The impact force does not provide an even distribution of force to allow the panel material to completely flow into the fastener s retaining groove. - force varies from application to application, depending on the criteria noted above. - On parts without a collar to provide a hard stop, press-in until the edge of the knurl is just barely visible. When to Install: is recommended after plating or finishing has been applied to the panel. The hole diameter must meet specifications before finish or plating is applied. - Do not over-install parts. This interupts the material and will reduce the retention strength. Over installation Panel This area of material has separated from the rest of the panel To request a quote, please or call us at

35 Guidelines 473 Southco Surface Mounted Technology (SMT) Captive Screws include installation and packaging features for installation onto PC Boards during the Reflow Process as a surface mounted device (SMD). SMT product installation is offered on these Southco Captive Screws for 4-40, 6-32 and M3 thread sizes: 47 d Series 4C Prism Series 52 Miniature Series Features Each Southco SMT style captive screw includes a polymide patch covering the screw head tool recess allowing for vacuum pick up during placement on the PC Board. The screw threads are protected from excess solder during the reflow process by a plug pre-assembled to the screw by Southco. The patch and plug are then removed after the final cool down phase. Screw as Shipped in Reel or Tray Pack Polyimide tape patch on top surface of screw for vacuum pick up Packed with Plug Preparing the PC Board to accept SMT Captive Screws See literature for optimum soldering pad surface area for the specific Southco Captive Screw being utilized Soldering Pad PC Board Packaging Features/Options Tray Pack Reel Pack Tray Pack Reel Pack Reflow Process Reflow of Solder - Pre-heat - Soak - Reflow - Cooling Cleaning - Remove excess solder paste

Gerotor Motors Series Dimensions A,B C T L L G1/2 M G1/ A 4 C H4 E

Gerotor Motors Series Dimensions A,B C T L L G1/2 M G1/ A 4 C H4 E Gerotor Motors Series Size CC-A Flange Options-B Shaft Options-C Ports Features 0 0 5 5 1 0 1 0 3 3 0 0 SAE A 2 Bolt - (2) 4 Bolt Magneto (4) 4 Bolt Square (H4) 1.0" Keyed (C) 25mm Keyed (A) 1.0' 6T Spline

More information

Layout 1

Layout 1 Hydraulics FITTINGS PRODUCT INDEX The comprehensive range of Hydraulic Hose Fittings supplied by Pirtek includes products which are suitable in skive and non-skive applications for use on low, medium,

More information

OVLFx3C7_Series_A3_bgry-KB.pub

OVLFx3C7_Series_A3_bgry-KB.pub (5 mm) x High brightness with well-defined spatial radiation patterns x U-resistant epoxy lens x Blue, green, red, yellow Product Photo Here Each device in the OLFx3C7 series is a high-intensity LED mounted

More information

8016_2_1page

8016_2_1page VARICONTM PART NUMBERING SYSTEM 00 NO. NUMBER OF CONTACTS 20=020, 38=038, 56=056, 90=090, 120=120 CONTACT CODE INSULATOR V=Standard Type HV=For High Voltage ( ) ( NO. OF CONTACTS) 20,38,56,90,120 (PITCH

More information

Gerolor Motors Series Dimensions A,B C T L L G1/2 M8 G1/ A 4 C H4 E

Gerolor Motors Series Dimensions A,B C T L L G1/2 M8 G1/ A 4 C H4 E Gerolor Motors Series Size CC-A Flange Options-B Shaft Options-C Ports Features 0 0 12 12 1 1 0 0 2 2 31 31 0 0 SAE A 2 Bolt - (2) 4 Bolt Magneto (4) 4 Bolt Square (H4) 1.0" Keyed (C) 2mm Keyed (A) 1.0'

More information

接线端子--Connectors规格书.doc

接线端子--Connectors规格书.doc Connectors with/without wire protector high-temperature resistant* High grade flexible strips Resistant to temperature up to 100 C (to 140 C) Multiple approvals Raised base Available with or without wire

More information

TECHNICAL DATA Date 12/22/15 Series F21U F MOTOR SPECIFICATIONS Motor Design Applications Insulation Class Maximum Liquid Temp Frequency RPM Air Filled Effulent water Class B 0-40 C ( 32-104 F ) 60 HZ

More information

8260

8260 Manual and Pilot Operated Spool Valves 6L Stainless Steel and Brass Bodies /4" to " NPT / / 6/6 Features Ideal for valve automation for the oil and gas market Reliable, robust design with high flow performance

More information

Preface This guide is intended to standardize the use of the WeChat brand and ensure the brand's integrity and consistency. The guide applies to all d

Preface This guide is intended to standardize the use of the WeChat brand and ensure the brand's integrity and consistency. The guide applies to all d WeChat Search Visual Identity Guidelines WEDESIGN 2018. 04 Preface This guide is intended to standardize the use of the WeChat brand and ensure the brand's integrity and consistency. The guide applies

More information

Rotary Switch Catalogue

Rotary Switch Catalogue Rotary Switches RS300/400/500 Series Outline Our RS series embody the manufacturing history of our company. All series are sturdy and solid with high dependability designed for control units of plants,

More information

MS24264 连接器

MS24264 连接器 DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, FLANGE MOUNTING, MINIATURE, CLASSES E, F, G AND R Inactive for new design for 14 November 1977.For new design, use MIL-DTL-83723, series III,

More information

Yuandong-hawks Ball valve cdr

Yuandong-hawks Ball valve cdr Yuandong 奉化市远东车辆部件有限公司 Fenghua Yuandong Auto Parts imited Company 奉化市哈克斯自动化设备有限公司 Fenghua awks Automatic Equipment imited Company igh Pressure Ball Valve igh pressure Ball valve is mainly used in the hydraulic

More information

Microsoft Word - 301E高温样本封面.doc

Microsoft Word - 301E高温样本封面.doc 无锡卓尔阀业有限公司 301E 三偏心高温 蝶阀 Triple Eccentric High Temperature Butterfly Valves STANDARD SPECIFICATION 301E GENERAL 301E Triple Eccentric High Temperature Butterfly valve 301E Triple eccentric high temperature

More information

觀 音 佛 祖 送 給 衣 宸 的 話 005 自 序 007 Part 1 修 行 心 體 驗 一 篇 看 見 佛 祖 012 二 篇 在 家 修 行 039 三 篇 世 界 的 創 造 者 054 四 篇 大 慈 悲 079 五 篇 最 珍 貴 的 禮 物 095 六 篇 自 救 法 力 練 習

觀 音 佛 祖 送 給 衣 宸 的 話 005 自 序 007 Part 1 修 行 心 體 驗 一 篇 看 見 佛 祖 012 二 篇 在 家 修 行 039 三 篇 世 界 的 創 造 者 054 四 篇 大 慈 悲 079 五 篇 最 珍 貴 的 禮 物 095 六 篇 自 救 法 力 練 習 觀 音 佛 祖 送 給 衣 宸 的 話 005 自 序 007 Part 1 修 行 心 體 驗 一 篇 看 見 佛 祖 012 二 篇 在 家 修 行 039 三 篇 世 界 的 創 造 者 054 四 篇 大 慈 悲 079 五 篇 最 珍 貴 的 禮 物 095 六 篇 自 救 法 力 練 習 110 七 篇 以 至 善 心 創 作 133 八 篇 智 慧 善 法 151 九 篇 我 的 修

More information

教 师 资 格 考 试 之 面 试 备 考 指 导 中 公 教 育 教 师 考 试 研 究 院

教 师 资 格 考 试 之 面 试 备 考 指 导 中 公 教 育 教 师 考 试 研 究 院 课 程 咨 询 电 话 :0531-86554188 教 师 资 格 考 试 之 面 试 备 考 指 导 中 公 教 育 教 师 考 试 研 究 院 面 试 基 础 知 识 -- 面 试 的 概 念 -- 面 试 的 本 质 -- 面 试 的 形 式 -- 考 试 的 现 状 -- 考 核 的 依 据 过 渡 页 请 思 考 面 试 是 什 么? 面 试 的 概 念 面 试 是 指 特 定 的

More information

coverage2.ppt

coverage2.ppt Satellite Tool Kit STK/Coverage STK 82 0715 010-68745117 1 Coverage Definition Figure of Merit 2 STK Basic Grid Assets Interval Description 3 Grid Global Latitude Bounds Longitude Lines Custom Regions

More information

热设计网

热设计网 例 例 Agenda Popular Simulation software in PC industry * CFD software -- Flotherm * Advantage of Flotherm Flotherm apply to Cooler design * How to build up the model * Optimal parameter in cooler design

More information

000

000 Style and Usage Application of Pogo Pin Connector Portable Electronic Products ( Notebook, MP3, DSC, GPS, TV Game Peripherals...) Telecommunication Products (Cell phone, Two-Way Radio, Blue tooth..) Automotive

More information

ch_code_infoaccess

ch_code_infoaccess 地 產 代 理 監 管 局 公 開 資 料 守 則 2014 年 5 月 目 錄 引 言 第 1 部 段 數 適 用 範 圍 1.1-1.2 監 管 局 部 門 1.1 紀 律 研 訊 1.2 提 供 資 料 1.3-1.6 按 慣 例 公 布 或 供 查 閱 的 資 料 1.3-1.4 應 要 求 提 供 的 資 料 1.5 法 定 義 務 及 限 制 1.6 程 序 1.7-1.19 公 開 資

More information

8260

8260 ASCO Stainless Steel Spool Valves Manually Operated and Main Supply Reset Valves Pilot Operated 316L Stainless Steel Bodies 1/4" NPT 3/2 Features Ideal for oil and gas control panel applications Drop-in

More information

SHIMPO_表1-表4

SHIMPO_表1-表4 For servo motor ABLEREDUCER SSeries Coaxial shaft series Features S series Standard backlash is 3 arc-min, ideal for precision control. High rigidity & high torque were achived by uncaged needle roller

More information

97 MANUFACTURING CAPABILITY APPLICATIONS Gapped Toroid Sizes(OD) 2.50mm mm Height 0.70mm mm Gap Sizes : 0.03mm mm AL Tolerance AL ±

97 MANUFACTURING CAPABILITY APPLICATIONS Gapped Toroid Sizes(OD) 2.50mm mm Height 0.70mm mm Gap Sizes : 0.03mm mm AL Tolerance AL ± 96 Type : T Cores Ordering Code: Shape: A10 T2.5*1.5*1.3 HP G Material Core Size Coating Gapped AL Value C : Epoxy Coating of Halogen-Free HP : Parylene Coating of Halogen-Free UC : Epoxy Coating of UL

More information

SHIMPO_表1-表4

SHIMPO_表1-表4 For servo motor ABLEREDUCER L Series Features Coaxial shaft series L series Helical gears contribute to reduce vibration and noise. Standard backlash is 5 arc-min, ideal for precision control. High rigidity

More information

untitled

untitled Right angle shaft type EVS EVS series NEV NEV series EVRG EVRG series Hollow shaft type STH STH series ABLE REDUCER ABLE REDUCER ABLE REDUCER Servo Reducer Selection Tool ABLE REDUCER ABLE REDUCER ABLE

More information

17 Prelight Apply Color Paint Vertex Color Tool Prelight Apply Color Paint Vertex Color Tool 242 Apply Color, Prelight Maya Shading Smooth

17 Prelight Apply Color Paint Vertex Color Tool Prelight Apply Color Paint Vertex Color Tool 242 Apply Color, Prelight Maya Shading Smooth 17 Prelight 233 234 242 Apply Color Paint Vertex Color Tool Prelight Apply Color Paint Vertex Color Tool 242 Apply Color, Prelight Maya Shading Smooth Shade All Custom Polygon DisplayOptions Color in Shaded

More information

Fridge Catalogue_NOV17_Final

Fridge Catalogue_NOV17_Final Simply Fresh Refrigerator Series RFD1711 (CF40) Whirlpool, U.S.A.Whirlpool is a registered trademark of Whirlpool, U.S.A. All Rights Reserved. www.whirlpool.com.hk Scan to download English catalogue Whirlpool

More information

WVT new

WVT new Operating and Installation Instructions 5120 004601 (PD 84 09 25) Please read this specification carefully before you use the product. Any failure and losses caused by ignoring the above mentioned items

More information

CG250englisch (Page 1)

CG250englisch (Page 1) 2 ZF-Duoplan 2K ZF-Servoplan PG ZF-Servoplan CG ZF-Tiratron ZF-Ecolift ZF-Servoplan PGE ZF-Servoplan WT 3 Servoplan SWG SERVOPLAN SWG 4 1. 2. 3. 4. 5. 6. 7. 8. SWG 5 5 1 3 4 6 2 7 SWG 30 N1 6000 i S5 4000

More information

Microsoft Word - (web)_F.1_Notes_&_Application_Form(Chi)(non-SPCCPS)_16-17.doc

Microsoft Word - (web)_F.1_Notes_&_Application_Form(Chi)(non-SPCCPS)_16-17.doc 聖 保 羅 男 女 中 學 學 年 中 一 入 學 申 請 申 請 須 知 申 請 程 序 : 請 將 下 列 文 件 交 回 本 校 ( 麥 當 勞 道 33 號 ( 請 以 A4 紙 張 雙 面 影 印, 並 用 魚 尾 夾 夾 起 : 填 妥 申 請 表 並 貼 上 近 照 小 學 五 年 級 上 下 學 期 成 績 表 影 印 本 課 外 活 動 表 現 及 服 務 的 證 明 文 件 及

More information

MODEL COLOR LIST UZ125D2 YMW GRAY YNF RED YRG BLUE 30H WHITE

MODEL COLOR LIST UZ125D2 YMW GRAY YNF RED YRG BLUE 30H WHITE MODEL COLOR LIST UZ125D2 YMW GRAY YNF RED YRG BLUE 30H WHITE MODEL COLOR LIST UZ125D2K K13 BLACK YRG BLUE YPK WHITE MODEL COLOR LIST UZ125X2 G22 Q05 GRAY ORANGE GREEN WHITE N28 W08 PREFACE When it becomes

More information

Coco and Breezy Eyewear is not only an eyewear company, we are a brand that highlights originality with a classic twist. Everything you touch should b

Coco and Breezy Eyewear is not only an eyewear company, we are a brand that highlights originality with a classic twist. Everything you touch should b COCO AND BREEZY Coco and Breezy Eyewear is not only an eyewear company, we are a brand that highlights originality with a classic twist. Everything you touch should be a piece of art. We create many combination

More information

bingdian001.com

bingdian001.com .,,.,!, ( ), : r=0, g=0, ( ). Ok,,,,,.,,. (stackup) stackup, 8 (4 power/ground 4,sggssggs, L1, L2 L8) L1,L4,L5,L8 , Oz Oz Oz( )=28.3 g( ), 1Oz, (DK) Cx Co = Cx/Co = - Prepreg/Core pp,,core pp,, pp.,, :,,

More information

xe c.pdf

xe c.pdf MITSUBISHI Industrial Sewing Machine Parts Catalog Model PLKE1010 CONTENTS Page A Construction 1 B C D E F G H J Arm bed & it s accessories 2 Arm bed & it s accessories 4 Sewing mechanism 6 Sewing mechanism

More information

Rhino SD/XD 125- or 160-mm Frames

Rhino SD/XD 125- or 160-mm Frames Rhino SD/XD 5 60 mm - Chinese - 08 8, http://emanuals.nordson.com NORDSON CORPORATION AMHERST, OHIO USA ..................... 3............ 5... 5... 8... 8... 8... 0... 0... 0... 3... 3 30 55 5 mm...

More information

xe03bt216d.pdf

xe03bt216d.pdf MITSUBISHI 三菱工業用ミシン部品カタログ Industrial Sewing Machine Parts Catalog Model PLK E03BT 目 次 CONTENTS Page A 本 体 構 成 Construction 1 B 本 体 関 係 (1) Arm bed & it s accessories (1) 2 C 本 体 関 係 (2) Arm bed & it s

More information

WFC40810

WFC40810 9000086873 (PD 85 05 10) Operating and Installation Instructions Please read this specification carefully before you use the product. Any failure and losses caused by ignoring the above mentioned items

More information

Table of Contents Power Film Capacitors Power Film Capacitors Series Table Product Type Series Voltage Capacitance() Page DC-Link Power Film Capacitors Power Film Capacitors Power Film Capacitors Power

More information

E15-3D1 1. Specifications Compact 4-Way Cassette type Model name MMU- AP0071MH2UL AP0091MH2UL AP0121MH2UL AP0151MH2UL AP0181MH2UL Cooling Capacity kbt

E15-3D1 1. Specifications Compact 4-Way Cassette type Model name MMU- AP0071MH2UL AP0091MH2UL AP0121MH2UL AP0151MH2UL AP0181MH2UL Cooling Capacity kbt E15-3D1 Compact 4-Way Cassette type MMU-AP0071MH2UL MMU-AP0091MH2UL MMU-AP0121MH2UL MMU-AP0151MH2UL MMU-AP0181MH2UL Contents 1. Specifications 2. Dimensions 3. Center of gravity 4. Piping diagram 5. Wiring

More information

FIGURE A

FIGURE A RYOBI in. TABLE SAW MODEL NUMBER RTS1 REPAIR SHEET 5 5 51 1 5 50 55 5 5 5 5 0 0 0 55 5 5 5 5 0 1 1 1 1 1 5 0 1 5 1 0 5 0 1 1 0 1 1 1 11 1 1 1 15 FIGURE A The model number will be found on a label attached

More information

P120412_KO_+_ZH_P120412_IWC_2016_2017_KO_+_ZH-KO.pdf

P120412_KO_+_ZH_P120412_IWC_2016_2017_KO_+_ZH-KO.pdf SINCE 1936 (PILOT S WATCHES) IWC 1940 52 T. S. C. IWC 1936 IWC 4 55 mm 52 T. S. C. 1948 11(Mark 11) IWC (Royal Air Force) 30 IWC 1988 2003 (Spitfire) IWC 2006 (Antoine de Saint-Exupéry) 2007 (TOP GUN)

More information

USA Maple UD-S683 3pc Shell Pack in Vintage Blond (VBO) S-5514-HBR Hammered Brass Snare 5600PK Gibraltar Hardware Pack

USA Maple UD-S683 3pc Shell Pack in Vintage Blond (VBO) S-5514-HBR Hammered Brass Snare 5600PK Gibraltar Hardware Pack USA Maple UD-S683 3pc Shell Pack in Vintage Blond (VBO) S-5514-HBR Hammered Brass Snare 5600PK Gibraltar Hardware Pack UD-F824K 4pc Shell Pack in Cherry Red (CRO) UD-F804K 4pc Shell Pack in Azure Blue

More information

HNC-120_180BA-L(R)-SL.xls

HNC-120_180BA-L(R)-SL.xls Parts List Counter Showcase Model HNC-120BA-L/R-SL HNC-150BA-L/R-SL HNC-180BA-L/R-SL HNC-210BA-L/R-SL hoshizakiamerica.com Number: S086-4248 Issued: 7-2018 Auxiliary Codes HNC-120BA-L/R-SL G-0 June 2017

More information

GH1220 Hall Switch

GH1220 Hall Switch Unipolar Hall Switch - Medium Sensitivity Product Description The DH220 is a unipolar h all switch designed in CMOS technology. The IC internally includes a voltage regulator, Hall sensor with dynamic

More information

User’s Manual

User’s Manual SNAP 500 打 印 机 用 户 手 册 1 用 户 手 册 SNAP TM 500 打 印 机 2015 年 8 月 24 日 AVERY DENNISON Manual Edition 2.5 2 SNAP 500 打 印 机 用 户 手 册 WARNING This device complies with Part 15 of the FCC Rules. Operation is subject

More information

Contents Performance data Standard efficiency IE1 cast iron three phase motor Performance data Standard efficiency IE1 aluminum three phase motor Perf

Contents Performance data Standard efficiency IE1 cast iron three phase motor Performance data Standard efficiency IE1 aluminum three phase motor Perf SM Range Three Phase Induction Motor Tianjin Shenchuan Electric Machine Co., Ltd. China Contents Performance data Standard efficiency IE1 cast iron three phase motor Performance data Standard efficiency

More information

WTO

WTO 10384 200015128 UDC Exploration on Design of CIB s Human Resources System in the New Stage (MBA) 2004 2004 2 3 2004 3 2 0 0 4 2 WTO Abstract Abstract With the rapid development of the high and new technique

More information

untitled

untitled 01 Content 03 11 05 13 07 15 09 17 02 19 25 27 21 29 23 30 03 04 ØØ ØØ The Global Provider of Actuators Mutually Beneficial elationships To Be Your Best Partner Focus On Professionalism Twenty years experience

More information

1-S40A...-1 DAT00452 V.005

1-S40A...-1 DAT00452 V.005 1. 1-S40A -1 Technical data: DATA SHEET Technical data Unit 1-S40A -1 OIML R60 D1 C3 Emax Max. capacity Kg 50,100,200,500 50,100,200,500 t 1, 2, 3, 5 1, 2, 3, 5 vmin % of Cn 0.0286 0.0120 Sensitivity mv/v

More information

About us About us Continental Solution Int l Ltd is a company based in China region that are specializing Continental Solution Continental Solution is

About us About us Continental Solution Int l Ltd is a company based in China region that are specializing Continental Solution Continental Solution is LARGE SELECTIONS FOR ALL USE Continental Solution INTEGRATED SOLUTIONS FOR PROCUREMENT EXCELLENCE STEEL GRATINGS September 2013 Product Details & Distribution SUPERIOR QUALITY COMPETITIVE PRICING About

More information

monalitDE_002.indd

monalitDE_002.indd MonAliT 70% 70mm 80mm MonAliT VDW-Technology Our diamond and boron nitride tools are manufactured using the new VDW-Technology. Diamond grains are strongly welded with each other. The diamond grain concentration

More information

ai

ai POPSICLE Y LEXA 80-901-1/-/-7/-0 or indoor domes c use / March 018-01 Designed in Denmark, made in Europe 80-901-1/-/-7/-0 A 3930-10030 Ø10x30mm x8 C D 3930-1000 Ø10x0mm x1 E 3917-1001 M10x1mm x1 J 033-00

More information

LH_Series_Rev2014.pdf

LH_Series_Rev2014.pdf REMINDERS Product information in this catalog is as of October 2013. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check

More information

States and capital package

States and capital package : 1 Students are required to know 50 states and capitals and their geological locations. This is an independent working packet to learn about 50 states and capital. Students are asked to fulfill 4 activities

More information

1.ai

1.ai HDMI camera ARTRAY CO,. LTD Introduction Thank you for purchasing the ARTCAM HDMI camera series. This manual shows the direction how to use the viewer software. Please refer other instructions or contact

More information

1

1 Application Chuck Instruction Manual Universal Ball Lock Power Chuck APPLICATION CHUCK PBL CHUCK (UNIVERSAL BALL LOCK POWER CHUCK) TABLE OF CONTENTS Keep this manual handy for easy reference as it will

More information

2.PFA 사출 Valve 지윤주

2.PFA 사출 Valve 지윤주 IF Series -urbin ype Digital Flowmeter D I 4-20mA 4-20mA [ 分离型 ] C A [ 一体型 ] Specification () ) ()( ) ()( ) (Max. p. Press)( ) (Max. p. emp)( ) (viscosity)( ) (Used Fluid)( ) - PC, PF, - - - 4~20mA - -

More information

STANDARD SPECIFICATION SS-CE-600M-B NOV M Rubber Seated Butterfly Valves GENERAL 600M Wafer type rubber seated butterfly valves has been deve

STANDARD SPECIFICATION SS-CE-600M-B NOV M Rubber Seated Butterfly Valves GENERAL 600M Wafer type rubber seated butterfly valves has been deve STANDARD SPECIFICATION SS-CE-600M-B NOV. 2006 600M Rubber Seated Butterfly Valves GENERAL 600M Wafer type rubber seated butterfly valves has been developed as a result of making great efforts to offer

More information

BC04 Module_antenna__ doc

BC04 Module_antenna__ doc http://www.infobluetooth.com TEL:+86-23-68798999 Fax: +86-23-68889515 Page 1 of 10 http://www.infobluetooth.com TEL:+86-23-68798999 Fax: +86-23-68889515 Page 2 of 10 http://www.infobluetooth.com TEL:+86-23-68798999

More information

入學考試網上報名指南

入學考試網上報名指南 入 學 考 試 網 上 報 名 指 南 On-line Application Guide for Admission Examination 16/01/2015 University of Macau Table of Contents Table of Contents... 1 A. 新 申 請 網 上 登 記 帳 戶 /Register for New Account... 2 B. 填

More information

Ryobi 10 in. Sliding Compound Miter Saw With Laser Model No. TSS102L Repair Sheet 0 1 2 3 4 62 65 5 6 36 68 6 8 69 6 9 80 81 6 66 40 82 23 3 4 6 44 43 4 45 50 46 52 48 49 51 59 55 54 53 60 5 61 40 58 63

More information

減災扶貧計劃

減災扶貧計劃 福 幼 基 金 會 2015 2016 年 度 項 目 工 作 簡 報 2015 年, 各 專 案 在 有 關 合 作 單 位 的 配 合 下 如 期 完 成 同 時, 第 七 屆 棟 樑 班 在 甘 肅 會 寧 縣 開 辦 ; 第 十 二 屆 雨 林 班 在 甘 肅 會 寧 縣 開 班 在 專 案 執 行 中, 我 們 繼 續 按 照 既 定 的 管 理 流 程, 加 強 專 案 各 環 節 的

More information

億泰利-燈型錄.indd

億泰利-燈型錄.indd Natural Dimmable LED Desk Lamp With Music GF-01H Hoe-Plus-BTB 竹檯燈 Arm ( ) Base ( ) Lighting source ( ) L : 350mm x D : 28mm L : 300mm x D : 28mm L : 180mm x W : 130mm x T : 20mm 3030 LEDs - 7W Power supply

More information

New Catalogue (ENGLISH).xls

New Catalogue (ENGLISH).xls FEMALE ROD END TYPE PH eries - Insertion type BODY BALL RACE - With grease nipple - Medium Carbon teel 35C(1035) - Chrome Moly Bearings teel UJ-2 (52100) - Copper Alloy - 400 ustainable for Corrosion Resistance

More information

國 立 政 治 大 學 教 育 學 系 2016 新 生 入 學 手 冊 目 錄 表 11 國 立 政 治 大 學 教 育 學 系 博 士 班 資 格 考 試 抵 免 申 請 表... 46 論 文 題 目 申 報 暨 指 導 教 授... 47 表 12 國 立 政 治 大 學 碩 博 士 班 論

國 立 政 治 大 學 教 育 學 系 2016 新 生 入 學 手 冊 目 錄 表 11 國 立 政 治 大 學 教 育 學 系 博 士 班 資 格 考 試 抵 免 申 請 表... 46 論 文 題 目 申 報 暨 指 導 教 授... 47 表 12 國 立 政 治 大 學 碩 博 士 班 論 國 立 政 治 大 學 教 育 學 系 2016 新 生 入 學 手 冊 目 錄 一 教 育 學 系 簡 介... 1 ( 一 ) 成 立 時 間... 1 ( 二 ) 教 育 目 標 與 發 展 方 向... 1 ( 三 ) 授 課 師 資... 2 ( 四 ) 行 政 人 員... 3 ( 五 ) 核 心 能 力 與 課 程 規 劃... 3 ( 六 ) 空 間 環 境... 12 ( 七 )

More information

FIT1改1.FIT)

FIT1改1.FIT) 卷 首 语 深 化 课 改, 深 向 何 方? 野 如 果 今 天 我 们 用 昨 天 的 方 式 教 的 话 袁 我 们 就 是 在 剥 夺 孩 子 的 未 来 遥 冶 过 去 的 教 育 袁 我 们 更 多 地 陷 入 应 试 教 育 的 泥 淖 不 可 自 拔 袁 如 今 教 育 环 境 愈 加 开 放 袁 社 会 诉 求 日 益 多 元 袁 我 们 必 须 转 变 育 人 模 式 袁 向 着

More information

TECHNICAL DATA Date 6/12/212 Series 5ASH21.5 AS MOTOR SPECIFICATIONS Motor Design Applications Insulation Class Maximum Liquid Temp Frequency RPM Air Filled Waste Water Class B -4 C ( 32-14 F ) HZ 345

More information

侨鸣彩页修改后.doc

侨鸣彩页修改后.doc LED LED LED ISO9001 LED Q M 0577-59979888 0577-59967988 0577-59967966 0577-59966599 E-mail manager@qmled.com www.qiaoming.com.cn www.qmled.com 1 1 2 3 4 5 6 7 LED 1 2 3 4 5 6 7 2 QM Q M-x A B C DE F GH

More information

060522達文西密碼_全_.PDF

060522達文西密碼_全_.PDF Date: May-22-2006 Page 1 Date: May-22-2006 Page 2 Date: May-22-2006 Page 3 Date: May-22-2006 Page 4 Date: May-22-2006 Page 5 Date: May-22-2006 Page 6 Date: May-22-2006 Page 7 Date: May-22-2006 Page 8 Date:

More information

HNC-120_210BA-L(R).xls

HNC-120_210BA-L(R).xls Parts List Counter Showcase Model HNC20BAL(R)S HNC50BAL(R)S HNC80BAL(R)S HNC20BAL(R)S hoshizakiamerica.com Number: S043268 Issued: 207 Auxiliary Codes HNC20BAL(R)S U October 2009 HNC50BAL(R)S A March 20

More information

Our Mission ICAPlants has been working since a long time in industrial automation, developing specific solutions for many industrial purposes to satis

Our Mission ICAPlants has been working since a long time in industrial automation, developing specific solutions for many industrial purposes to satis Tyres Assembly Systems Our Mission ICAPlants has been working since a long time in industrial automation, developing specific solutions for many industrial purposes to satisfy Customers worldwide. Our

More information

CANVIO_AEROCAST_CS_EN.indd

CANVIO_AEROCAST_CS_EN.indd 简 体 中 文...2 English...4 SC5151-A0 简 体 中 文 步 骤 2: 了 解 您 的 CANVIO AeroCast CANVIO AeroCast 无 线 移 动 硬 盘 快 速 入 门 指 南 欢 迎 并 感 谢 您 选 择 TOSHIBA 产 品 有 关 您 的 TOSHIBA 产 品 的 详 情, 请 参 阅 包 含 更 多 信 息 的 用 户 手 册 () 安

More information

p00.cdr

p00.cdr FLEXIBLE COUPLING Model SCT SCT-C SCTS SCTS-C SCP SWS SWS-C SWSS SWSS-C SRJ SRJ-C Material Aluminium Aluminium S/Steel S/Steel Plastic Aluminium Aluminium S/Steel S/Steel Aluminium Aluminium Locking Style

More information

K301Q-D VRT中英文说明书141009

K301Q-D VRT中英文说明书141009 THE INSTALLING INSTRUCTION FOR CONCEALED TANK Important instuction:.. Please confirm the structure and shape before installing the toilet bowl. Meanwhile measure the exact size H between outfall and infall

More information

Microsoft Word - 02 资讯

Microsoft Word - 02 资讯 目 录 关 于 专 委 会 办 公 地 点 和 联 系 方 式 变 更 的 通 知 ------------------------------------------------------ 1 业 内 参 考 部 分 医 疗 器 械 注 册 相 关 事 宜 有 变 --- --- ----------------------------------- - 2 国 家 药 监 局 :2010 年

More information

User’s Manual

User’s Manual V7 用 户 手 册 亿 图 为 您 专 业 图 表 设 计 提 供 最 佳 解 决 方 案 2004-2014 EdrawSoft. All right reserved. Edraw and Edraw logo are registered trademarks of EdrawSoft. 目 录 亿 图 怎 样 优 越 于 其 他 软 件... 5 亿 图 7 个 新 功 能... 6 为

More information

<4D6963726F736F667420576F7264202D20BDA8D6FED2B5B7A2D5B9A1B0CAAEB6FECEE5A1B1B9E6BBAE2E646F63>

<4D6963726F736F667420576F7264202D20BDA8D6FED2B5B7A2D5B9A1B0CAAEB6FECEE5A1B1B9E6BBAE2E646F63> 建 筑 业 发 展 十 二 五 规 划 二 一 一 年 七 月 目 录 序 言 一 发 展 现 状 和 面 临 形 势... (1) ( 一 ) 发 展 成 就... (1) ( 二 ) 主 要 问 题... (2) ( 三 ) 面 临 形 势... (3) 二 指 导 思 想 基 本 原 则 和 发 展 目 标... (3) ( 一 ) 指 导 思 想... (3) ( 二 ) 基 本 原 则...

More information

untitled

untitled 2014 6 50 2015 3 19 11 2015 3 2014/15 69 70 2014/15 2014 9 2014-15 2 900 2014 2014 5 2015 3 5 24 5 10 5 31 6 7 9 50 16 7 6 80 7 19 2014 18 9 6 11 2 12 2015 1 11 2 8 2014/15 71 2014 2014-15 $80,000 2015

More information

001Contents

001Contents Selection Guide Inductions of types Selection guide Contents 002 003 Standard capacitive sensors DC series AC series 008 024 Special capacitive sensors High temperature series Ring series 029 035 Accessories

More information

HS244500W HS244600W.ppt

HS244500W HS244600W.ppt 西 门 子 嵌 入 式 食 具 消 毒 柜 BUILT-IN TABLEWARE STERILIZER 使 用 及 安 装 说 明 书 OPERATION AND INSTALLATION INSTRUCTION cn HS244500W HS244600W 前 言 /Preface 非 常 感 谢 您 选 购 西 门 子 家 电 的 厨 房 电 器 产 品! 在 使 用 本 产 品 前, 请 您

More information

第 一 屆 香 港 嬰 幼 兒 產 業 及 嬰 幼 兒 教 育 及 護 理 分 享 會 目 標 : 增 加 各 專 業 及 商 家 對 嬰 幼 兒 早 教 及 護 理 的 認 識 及 交 流, 發 掘 嬰 幼 兒 早 教 產 業 機 會 增 進 嬰 幼 兒 產 業 的 發 展 簡 介 : 香 港 的

第 一 屆 香 港 嬰 幼 兒 產 業 及 嬰 幼 兒 教 育 及 護 理 分 享 會 目 標 : 增 加 各 專 業 及 商 家 對 嬰 幼 兒 早 教 及 護 理 的 認 識 及 交 流, 發 掘 嬰 幼 兒 早 教 產 業 機 會 增 進 嬰 幼 兒 產 業 的 發 展 簡 介 : 香 港 的 嬰 幼 兒 早 教 及 護 理 專 家 分 享 會 正 式 邀 請 函 敬 啟 者 : 由 國 際 嬰 兒 按 摩 協 會 主 辦,CHILDFOCUS 協 辦, 美 聯 金 融 集 團 贊 助 的 第 一 屆 嬰 幼 兒 早 教 及 護 理 分 會 將 於 二 零 一 五 年 一 月 三 十 日 ( 星 期 五 ), 下 午 六 時 三 十 分, 在 旺 角 彌 敦 道 570-572 號 基 利

More information

勞動條件檢查執行重點(雲林)_1050323 [相容模式]

勞動條件檢查執行重點(雲林)_1050323 [相容模式] 勞 動 條 件 檢 查 執 行 重 點 主 講 : 雲 林 縣 政 府 勞 工 處 大 鋼 105 年 新 工 時 規 定 修 正 重 點 現 行 工 時 制 度 工 資 促 進 就 業 平 等 措 施 2 105 年 新 工 時 規 定 修 正 重 點 1. 原 雇 主 應 置 備 勞 工 簽 到 簿 或 出 勤 卡 之 規 定 修 正 為 出 勤 紀 錄 修 正 第 一 項 法 定 工 時 2.

More information

醋 水 法 在 水 盆 內 放 入 約 七 分 滿 的 水 與 1/2 到 1 小 杯 的 醋 量, 將 髒 襪 子 浸 泡 一 晚, 隔 天 再 丟 入 洗 衣 機, 就 能 洗 得 相 當 乾 淨 醋 有 殺 菌 除 臭 和 漂 白 功 效, 使 用 過 的 醋 水, 還 可 清 理 地 板,

醋 水 法 在 水 盆 內 放 入 約 七 分 滿 的 水 與 1/2 到 1 小 杯 的 醋 量, 將 髒 襪 子 浸 泡 一 晚, 隔 天 再 丟 入 洗 衣 機, 就 能 洗 得 相 當 乾 淨 醋 有 殺 菌 除 臭 和 漂 白 功 效, 使 用 過 的 醋 水, 還 可 清 理 地 板, 家 事 生 活 小 技 巧 髒 襪 子 清 洗 撇 步 手 套 法 雙 手 套 進 襪 子 裡, 像 洗 手 套 一 樣, 利 用 手 指 左 右 揉 搓, 將 難 洗 的 污 垢 洗 乾 淨 彈 珠 法 在 洗 衣 網 內, 放 入 襪 子 以 及 約 十 顆 左 右 的 彈 珠, 利 用 彈 珠 與 襪 子 碰 撞 之 間, 將 髒 汙 從 纖 維 之 中 揉 搓 出 來 醋 水 法 在 水 盆

More information

穨2000010.PDF

穨2000010.PDF -1- -2- -3- -4- -5- -6- -7- -8- -9- -10- 89 9 7 7:30 1 9 9 7:30~9:30 1 2 3 2 9 1112 7:30~9:30 2000 1 2 3 3 10 5 1 9 2 10 5-11- 10 6 3 10 26 4 10 7 7:00 4 10 11 12 110 10 14 7 211 11 4 7 312 12 12 31 2000

More information

第一冊 第四章 分裂與再統一 班級 座號 姓吊

第一冊  第四章  分裂與再統一             班級    座號    姓吊 石 器 文 明 石 器 時 代 文 字 發 明 前 為, 文 字 發 明 以 後 進 入 第 三 冊 ( 第 1 章 從 史 前 到 春 秋 戰 國 ) 1. 遠 古 人 類 最 初 以 為 主 要 工 具, 考 古 學 家 把 這 個 時 代 稱 為 石 器 時 代 2. 又 根 據 石 器 製 作 方 式 的 不 同, 分 為 (1) 舊 石 器 時 代 -- (2) 新 石 器 時 代 --

More information

Microsoft Word - 完全手冊-課程.doc

Microsoft Word - 完全手冊-課程.doc 課 程 鍋 爐 具 1. 黑 鍋 : 大 鍋 ( 煮 飯 用 ) 小 鍋 ( 煮 菜 用 ) 湯 鍋 鍋 炳 大 中 小 鍋 蓋 賓 士 盤 *5 調 味 杯 ( 分 別 裝 鹽 糖 油 醬 油 沙 拉 油 ) 鍋 炳 + 大 鍋 蓋 = 平 底 鍋 2. 泥 + 水 或 牙 膏, 塗 在 鍋 底 下 煮, 鍋 底 就 不 會 被 火 燒 焦 黑 帳 篷 1. 包 含 內 帳 外 帳 2 根 營 柱

More information

OA-253_H1~H4_OL.ai

OA-253_H1~H4_OL.ai WARNINGS Note: Read ALL the following BEFORE using this product. Follow all Guidelines at all times while using this product. CAUTION This warning indicates possibility of personal injury and material

More information

交易机制:标准与国际比较

交易机制:标准与国际比较 上 海 证 券 交 易 所 期 权 全 真 模 拟 交 易 业 务 方 案 ( 非 正 式 版 ) 上 海 证 券 交 易 所 V2.0 2014 年 4 月 1 修 改 说 明 序 号 涉 及 内 容 参 考 页 码 1 标 的 选 择 的 相 关 指 标 和 工 作 机 制 11 2 异 常 情 况 下 ( 最 后 交 易 日 或 交 收 日 停 牌 ) 才 允 许 部 分 现 金 结 算 32

More information

Microsoft Word - PZ series.doc

Microsoft Word - PZ series.doc 叠 层 片 式 铁 氧 体 磁 珠 P 系 列 Multilayer Chip Ferrite Bead P Series Operating Temp. : -4 ~ +8 特 征 FEATUES 内 部 印 有 银 电 极 的 叠 层 结 构, 铁 氧 体 屏 蔽 无 串 扰 Internal silver printed layers and magnetic shielded structures

More information

Finale 2003 - [15-1861R I'm Part of the Rainbow.MUS]

Finale 2003 - [15-1861R I'm Part of the Rainbow.MUS] 2 I m Part of the Rainow y Glenn McClure Lyrics Rainow, rainow can I e Blue lue the deep lue sea Blue is different, Blue is eautiful Look, look I m part of the Rainow Look, look I fly up so high Additional

More information

Manual Pulse Generator Catalogue

Manual Pulse Generator Catalogue Manual Pulse Generator RE45T series Outline RE45T/V series are compact optical manual pulse generators that allow accurate and smooth manual motion for NC machine tools, industrial machines etc. Features

More information

untitled

untitled F3 F3 -- DA4G8 (ENGINE TYPE NUMBER) 4D 54A0004 54A0004 (PRODUCE GLIDE NUMBER) 5 2005 (2005 YEAR) 4 4 (APRIL) A0004 (PRODUCE ORDER NUMBER) The type number and the series number are marked on the left side

More information

从《动物福,本网站受美国法律保护 利法》看美国的动物保护——萧冰

从《动物福,本网站受美国法律保护 利法》看美国的动物保护——萧冰 从 动 物 福, 本 网 站 受 美 国 法 律 保 护 萧 冰 利 法 看 美 国 的 动 物 保 护 www.qigwnw.com 从 动 物 福, 本 网 站 受 美 国 法 律 保 护 http://www.qigwnw.com 利 法 看 美 国 的 动 物 保 护 萧 冰 最 好 就 是 去 网 上 下 载 一 个 XPSP2/3 系 统 正 版 验 证 补 丁 进 行 安 装 即 可

More information

Microsoft Word - HSK使用手册.doc

Microsoft Word - HSK使用手册.doc HSK / New HSK Online Mock Test/Practices Student User Manual Table of contents New User... 2 1.1 Register... 2 1.2 Login... 3 1.3 Homepage... 4 Free Test... 4 2.1 Start... 5 2.2 Results... 6 Mock Test...

More information

Microsoft Word - ApL Student Manual_BFE_2011-13_final.doc

Microsoft Word - ApL Student Manual_BFE_2011-13_final.doc 目 錄 目 錄 頁 數 1. 課 程 介 紹 1 課 程 目 標 1 學 習 成 果 1 課 程 內 容 及 結 構 2 學 習 單 元 3 2. 學 習 課 題 5 3. 教 學 方 法 10 4. 修 業 時 數 10 5. 授 課 語 言 10 6. 參 考 書 籍 及 網 址 10 7. 評 估 計 劃 13 8. 達 標 等 級 表 現 描 述 14 9. 升 學 及 就 業 14 10.

More information

01CP-WX3030WNetc_CO_ENG.indd

01CP-WX3030WNetc_CO_ENG.indd Data Video Projector User s Manual (Concise) ModelS: 8928A/8930A/8931WA/ 8933W Information in this Guide may change due to product improvements. To obtain the latest manuals, literature, and software please

More information

Microsoft Word - CX VMCO 3 easy step v1.doc

Microsoft Word - CX VMCO 3 easy step v1.doc Abacus Fully Automated Process of VMCO on CX, KA, CPH & KAH 16 Nov 2009 To streamline the VMCO handling on CX, KA, CPH & KAH, Abacus is pleased to inform you that manual submission of VMCO to CX/KA/CPH/KAH

More information

Spare Parts List for the following products Inhaltsverzeichnis Part No. Description Type Universal Tamp Applicator 1005L-100H Universa

Spare Parts List for the following products Inhaltsverzeichnis Part No. Description Type Universal Tamp Applicator 1005L-100H Universa Spare Parts List Universal Applicator with Lift Cylinder 1005 Spare Parts List for the following products Inhaltsverzeichnis Part No. Description Type 5950250 Universal Tamp Applicator 1005L-100H 5950253

More information

1.30 1.50 0.35 0.50 0.03 0.03 0.20 0.50 750800 Slow Cooling 780820 Water Quenching HRC 63 Hv 780 1.10 1.30 0.35 0.50 0.03 0.03 750800 Slow Cooling 760820 Water Quenching HRC 63 Hv 780 INDEX ENGINEER'S

More information

Microsoft Word - SupplyIT manual 3_cn_david.doc

Microsoft Word - SupplyIT manual 3_cn_david.doc MR PRICE Supply IT Lynette Rajiah 1 3 2 4 3 5 4 7 4.1 8 4.2 8 4.3 8 5 9 6 10 6.1 16 6.2 17 6.3 18 7 21 7.1 24 7.2 25 7.3 26 7.4 27 7.5 28 7.6 29 7.7 30 7.8 31 7.9 32 7.10 32 7.11 33 7.12 34 1 7.13 35 7.14

More information

Microsoft PowerPoint - Sens-Tech WCNDT [兼容模式]

Microsoft PowerPoint - Sens-Tech WCNDT [兼容模式] X-ray data acquisition systems for NDT applications 技股份有限公司 先锋科技股份有限公司 科技股份有限公司 先锋科技股份有限公司 www Sens-Tech Ltd UK based company 40 Staff Specialise in detection and data acquisition systems for light and

More information