Disclaimer and Warning EN Congratulations on purchasing your new DJI product. The information in this document affects your safety and your legal righ

Size: px

Start display at page:

Download "Disclaimer and Warning EN Congratulations on purchasing your new DJI product. The information in this document affects your safety and your legal righ"

寻胡
6 years ago
Views:

1 INSPIRE LS Propeller Mounting Plate Kit 1345LS 快拆桨底座套件 Product Information 产品信息 V

2 Disclaimer and Warning EN Congratulations on purchasing your new DJI product. The information in this document affects your safety and your legal rights and responsibilities. Read this entire document carefully to ensure proper configuration before use. Failure to read and follow instructions and warnings in this document may result in serious injury to yourself or others, damage to your DJI product, or damage to other objects in the vicinity. This document and all other collateral documents are subject to change at the sole discretion of DJI. By using this product, you hereby signify that you have read this disclaimer and warning carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. You agree to use this product only for purposes that are proper and in accordance with all applicable laws, rules, and regulations, and all terms, precautions, practices, policies and guidelines DJI has made and may make available. DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product. The user shall observe safe and lawful practices including, but not limited to, those set forth in this document. Notwithstanding above, your statutory rights under applicable national legislation are not affected by this disclaimer. DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as DJI ) and its affiliated companies. Names of products, brands, etc., appearing in this document are trademarks or registered trademarks of their respective owner companies. This product and document are copyrighted by DJI with all rights reserved. No part of this product or document shall be reproduced in any form without prior written consent of or authorization from DJI. Introduction INSPIRE LS propeller mounting plate kit to mount the 1345 LS Quick- Release Propellers onto the motors. Installation Tools Required: 2mm Hex Key/ Hex Screwdriver and LOCITITE 243 Adhesive 2

3 Propeller adapters, retaining rings and propeller mounting plates marked with CW should be mounted on motors marked CW, and those marked with CCW should be mounted on motors marked CCW. The red spring pad must be mounted on CW motors, and the silver one on CCW motors. DO NOT mix them. Put the screws and other parts in the correct places during installation and removal. Apply LOCTITE 243 adhesive for secure installation. Using mismatched screwdrivers will lead to screws with stripped heads that won't be able to tighten. EN 1. Remove the screws securing the original propeller mounting plate on the motors, and then remove the original propeller mounting plate and the spring pad. Propeller mounting plate Spring pad 2. Insert the included screws and tighten to secure the propeller adapter on the motor. To better secure the propeller adapter, apply LOCTITE 243 adhesive onto the screws. Propeller adapter 3

4 3. Secure the spring pad, retaining ring and 1345LS propeller mounting plate on the propeller adapter in sequence, and apply LOCTITE 243 adhesive onto the screws. EN Propeller mounting plate Retaining ring Spring pad 4. Ensure to stick the included foam on the propellers as shown before mounting them onto the motors. Foam 4

5 免责声明和警告感谢您购买 DJI 产品本文所提及的内容关系到您的安全以及合法权益与责任使用本产品之前, 请仔细阅读本文以确保已对产品进行正确的设置不遵循和不按照本文的说明与警告来操作可能会给您和周围的人带来伤害, 损坏本产品或其它周围的物品本文档及本产品所有相关的文档最终解释权归大疆创新 (DJI) 所有如有更新, 恕不另行通知请访问官方网站以获取最新的产品信息 CH 一旦使用本产品, 即视为您已经仔细阅读本免责声明与警告, 理解认可和接受本声明全部条款和内容您承诺对使用本产品以及可能带来的后果负全部责任您承诺仅出于正当目的使用本产品, 并且同意本条款以及大疆创新 (DJI) 制定的任何相关条例政策和指引大疆创新 (DJI) 对于直接或间接使用本产品而造成的损坏伤害以及任何法律责任不予负责用户应遵循包括但不限于本文提及的所有安全指引即使存在上述规定, 消费者权益依然受当地法律法规所保障, 并不受本免责声明影响 DJI 是深圳市大疆创新科技有限公司及其关联公司的商标本文出现的产品名称品牌等, 均为其所属公司的商标或注册商标本产品及手册为大疆创新版权所有未经许可, 不得以任何形式复制翻印简介 INSPIRE LS 快拆桨底座套件用于将 1345LS 快拆桨固定于电机上安装自备工具 :2mm 内六角扳手 / 内六角螺丝刀,LOCTITE243 胶水桨叶转接座挡桨圈及桨叶基座上带 CW 标志的对应 CW 电机, 带 CCW 标志的对应 CCW 电机红色弹片对应 CW 电机, 银色弹片对应 CCW 电机, 切勿混用拆装过程中请注意保管零件, 以免丢失请务必于螺丝螺纹处涂抹 LOCTITE243 胶水, 以固定牢固如使用不配套的螺丝刀或螺丝刀本身有较大磨损, 将会导致咬合量过小, 可能产生滑丝现象 5

6 1. 如图所示, 松开电机上方螺丝, 并将原桨叶基座和弹片取下桨叶基座 CH 弹片 2. 将桨叶转接座用包装内的螺丝固定于电机上, 并于螺丝螺纹处涂抹 LOCTITE243 胶水以完全固定桨叶转接座 3. 用包装内的螺丝分别将弹片桨档圈桨叶基座固定于桨叶转接座上, 并于螺丝螺纹处涂抹 LOCTITE243 胶水以完全固定桨叶基座桨档圈弹片 6

7 4. 安装螺旋桨前, 务必将包装内所含的泡沫棉按照下图所指粘贴至螺旋桨指定位置泡沫棉 7

8 DJI Support DJI 技术支持 If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. 如果您对说明书有任何疑问或建议, 请通过以下电子邮箱联系我们 :DocSupport@dji.com INSPIRE is a trademark of DJI. Copyright 2017 DJI All Rights Reserved.

Disclaimer and Warning Congratulations on purchasing your new DJI product. The information in this document affects your safety and your legal rights

INSPIRE 2 DJI Focus Handwheel- Remote Controller Stand 手持跟焦器遥控器支架 User Guide 使用说明 V1.0 2017.01 Disclaimer and Warning Congratulations on purchasing your new DJI product. The information in this document