Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download ""

Transcription

1 6 CHUJIAO-6 TRAINER ILLUSTRATED PARTS BREAKDOWN CATALOG VOLUME 3 STANDARD PARTS TOOLS AND GROUND EQUIPMENT DELIVERED WITH AIRCRAFT THE PEOPLES REPUBLIC OF CHINA

2

3 航空器材目录

4 FOREWORD The catalog is provided specially for customers and supply departments of air materials. It belongs to the aircraft part and consists of five volumes, that is, Volume Structure, Landing Gear, Control System and Pneumatic System Volume Power Plant and Special Equipment Volume 3 Standard Parts, Tools and Ground Equipment Delivered with Aircraft Volume HS-6A Engine Volume 5 Electrical Equipment, Instrument and Radio Equipment Part quantity of this catalog is total parts of each aircraft. This catalog is based on applicable design drawings and relative technical documents.

5 6

6 CONTENTS FOREWORD STANDARD PARTS NATIONAL STANDARD 3 - GB5 Hexagon nut GB5 6 - GB6 Butterfly nut GB6 6-3 GB9 Split pin GB9 6 - GB859 Spring washer GB GB86 Outer tongue elastic washer GB GB867 Half-round headed rivet GB GB868 Flat conical rivet GB GB countersunk rivet GB GB87 0 countersunk half hollow rivet GB GB876 Hollow rivet GB GB89 Elastic stop ring for axle GB GB9 Small hexagon self-lock nut GB9 8-3 GB95 Light hexagon self-lock nut GB GB99 Single lug plate self-lock nut GB GB930 Double lug plate self-lock nut GB GB95 0 countersunk rivet GB GB96 Pad for single lug plate self-lock nut GB GB96 Pad for double lug plate self-lock nut GB GB975 Tubular shank rivet GB975 i

7 ii -0 GB007 Small hexagon oblate nut GB007 - GB0 Big oblate round- headed rivet GB0 - GB06 Headless rivet GB06-3 GB08 Washer GB08 - GB0 Angle shaped outer tongue stop washer GB0 5 STANDARD PARTS CLASS I FASTENING PARTS 7 - HB-0 Hexagon headed bolt HB HB-5 Taper-shaped bolt HB HB-6 Taper-shaped bolt HB HB-9 90 countersunk bolt HB HB-37 Cross- slot 0 half-countersunk HB-37-6 HB-0 Hexagon screw HB-0-7 HB-0 Flat round headed screw HB HB-03 Cylinder screw with safety hole in the head HB HB-0 Oblate round shaped screw HB HB countersunk screw HB HB countersunk screw HB HB- Cross-slot 0 half countersunk screw HB- 8-3 HB-0 Hexagon slit thick nut HB HB-50 Washer for taper bolt HB HB-50 Arc-shaper washer for taper bolt HB HB-503 Arc-shaper bolt HB HB-509 Pad HB HB-50 Fiber washer HB HB-60 Flat conical headed hollow rivet HB HB-703 Flat headed axle HB HB-70GD Stop block 3HB-70GD 33 - HB-706 Quick detachable spring pin HB

8 STANDARD PARTS CLASS II AIRFRAME MEMBERS LOCK HB- Fixed angle HB ( )HB-3 Fixed angle wide HB HB- Round shaped ring HB HB-5 Ellipse ring HB HB-8 Aluminium alloy corrugated plate HB HB-9 Cloth cover of closing hole HB HB- Pilot safety belt HB HB- Pilot safety belt HB HB- Shoulder strap of pilot safety belt 3HB- 3-0 HB-0 Hinge HB-0 3- HB- Hinge HB- 3- HB -30A Pivot HB-30A HB -30B Pivot HB-30B 3 3- HB-3 Lock HB HB-8 Oblate round headed screw HB HB-9 Countersunk screw HB HB-5 Short hollow rivet HB HB-5 Cloud-like lock spring HB HB-6 Chain HB HB-63 Chain HB HB-6 Thread safety HB HB-65 Safety pin HB HB-66 Eyelet strap HB HB-66 Eyelet HB STANSARD PARTS CLASS IV SPRING BUSH CLAMP 7 - HB3- Cylinder coil compression spring HB3-50 iii

9 - HB3- Cylinder coil extension spring HB HB3-0 Press-in bush with convexity HB HB3- Bush HB HB3- Rough grade bush HB HB3- Copper bush HB HB3-9 Hanging clamp HB HB3- Snap for belt HB HB3- Belt HB HB3- Welding clamp HB HB3- Clamp ring HB HB3-5 Holding clamp with washer HB HB3-5 Clamp belt HB HB3-6 Single bolt side fixed clamp with ground connection HB HB3-9 Rubber washer HB HB3-3 Clamp for fixing cable HB HB3- Special shaped clamp HB HB3- A0 33 Belt for fixing fuel tank HB3- A HB3- Holding bolt 3HB HB3- Shaft HB HB3- Gasket 5HB HB3- Chain 6HB HB3-5 Holding clamp HB Q 5A3- Clamp for fixing pipe Q/5A Q 5A3-5 Clamp Q/5A Q 5A3-8 Clamp Q/5A Q 5A3-9 Clamp Q/5A Q 5A3- Welding clamp Q/5A Q 5A3-7 Bush Q/5A iv

10 STANDARD PARTS CLASS IV PIPE LINE SEALING PARTS OF AIR HYDRAULIC SYSTEM 6 5- HB- Straight through pipe connector HB B HB-0 Type B elbow pipe connector HB B HB- Type B right angled pipe connector HB HB-7 Three-way pipe connector HB B HB-0 Type B three-way pipe connector HB B HB- Type B asymmetry three-way pipe connector HB HB-6 Four-way pipe connector HB HB- Nipple HB HB-5 Swivel nut HB HB-6 Locking nut HB HB-9 Grip nut HB HB-60 Taper-thread straight-through pipe connector HB HB-6 Taper thread right angled knee connector HB A HB-6 Type A taper thread knee connector HB HB-63 Taper thread three-way pipe connector HB A HB-6 Type A taper thread three-way pipe connector HB HB-65 Taper thread four-way pipe connector HB HB-70 Valve oil syringe HB Q 5A- Type nipple Q/5A Q 5A-7 Sealing rubber ring Q/5A Q 5A-3 High-pressure hose Q/5A Q 5A-5 Splicing hose Q/5A Q 5A-5 Splicing hose Q/5A Q 5A-69 Sleeve Q/5A Q 5A-70 Sleeve Q/5A-70 7 v

11 vi 5-6 Q 5A-73 Nipple Q/5A Q 5A-77 Nipple Q/5A Q 5A-79 Nipple Q/5A Q 5A-8 Swivel nut Q/5A Q 5A-83 Inner taper nipple Q/5A Q 5A-85 Sleeve Q/5A STANDARD PARTS CLASS V CONTROL SYSTEM HB5-5 Steel hoop HB HB5-9 Compression thimble of steel cable HB HB5-7 Small ball with ball headed cable HB HB5- Elastic thread sleeve HB HB5-7 Thimble HB HB5-8 Eyelet connector for hoop HB HB5-30 Forked connector HB HB5-37 Fork bolt HB HB5- Driving lever HB HB5- Clamp ring HB HB5- Stop pin 3HB HB5- Support washer HB HB5- Outer cover 5HB Q 5A5- Control pull rod Q/5A Q 5A5- Control pull rod Q/5A Q 5A5-3 Control cable Q/5A Q 5A5-3 Connector Q/5A Q 5A5- Tube Q/5A Q 5A5-5 Fork connector Q/5A Q 8A5- Pulley Q/8A Q 8A5- Bush Q/8A5-8

12 6 STANDARD PARTS CLASS VI ELECTRICAL EQUIPMENT INSTRUMENT RADIO EQUIPMENT HB6-6 Wire pipe shaped connector HB HB6-7A Double claw wire connector HB6-7A HB6-8 Wire connector HB HB6- Damping washer HB HB6-7 Safeguard HB HB6-3 Rubber protecting sleeve HB HB6-39 Bonding jumper HB HB6-0 Bonding jumper HB Q 5A6- Nipple Q/5A Q 5A6-8 Bush Q/5A Q 8A6- Plug Q/8A STANDARD PARTS CLASS VII IX HB7- Error curve clip HB HB9-5 Double lug plate nut HB Q 5A9-5 Angle Q/5A Q 5A9-6 Eyelet Q/5A Q 5A9- Fuel check valve Q/5A Q 5A9-6 Ring Q/5A Q 5A9-7 Nipple Q/5A Q 5A9-35 Buckle Q/5A Q 5A9-36 Fuel tank placard Q/5A Q 5A9-38 Placard Q/5A TOOLS DELIVERED WITH AIRCRAFT AND EQUIPMENT vii

13 95 UNIVERSAL TOOLS 97 viii - Fine file 03 - Rat tail file 03-3 Oblate chisel 03 - Sharp nose pliers 03-5 Hand hammer Iron hammer 03-6 Hammer for clock 03-7 Adjustable spanner 03-8 Spanner 03-9 Ratchet spanner 0-0 Single end bent hexagon spanner 0 - Changeable head of ratchet spanner 0 - Box spanner 0-3 Handle 0 - Flat nose pliers 0-5 Center punch -6 Nippers -7 Screw driver with wooden handle -8 Automatic screw driver -9 Common screw driver with wooden handle -0 Cross-head screw driver - Common screw driver with wooden handle 8 - Slip joint pliers 8-3 Sharp nose pliers 8 - Feeler 8-5 Working lamp 8

14 -6 Electric iron 8-7 Knife for electrician 8-8 Magnifying glass 9-9 Steel tape 9-30 Test pencil 9-3 Tyre manometer 9 SPECIAL TOOLS - Taper punch 30 - Copper punch 30-3 Tool bag delivered with aircraft 30 - Moment spanner with scale 30-5 Special spanner 30-6 Nut spanner for mounting and dismounting gill 30-7 Spanner for plug of cylinder No Box spanner 30-9 S=36 S 36 Oil filter spanner 3-0 Spanner for mounting and dismounting uplock emergency valve 3 - Double end hexagon box spanner 3 - Special spanner for mounting & dismounting nose & main wheel axle 3-3 Double end hexagon spanner 3 - Special spanner 3-5 Special spanner 3-6 Oil filter plug spanner -7 I-shaped spanner -8 Special spanner -9 Sleeve head for propeller momental spanner -0 Changeable sleeve head - Double end bent screw driver ix

15 x - Taper for splicing cable -3 Tool for mounting leather cup - Punch mounting and dismounting nose wheel shaft -5 Guide ring -6 Guide ring -7 Grease gun -8 Rod for mounting and dismounting wheel tyre kg Spring for measuring force 5 0kg -30 Kink tool -3 Fixed clamp for splicing cable EQUIPMENT DELIVERED WITH AIRCRAFT 3 3- Diagram of cloth cover 6 3- Device for mooring fuselage Upset clamp of aileron 7 Locking clamp of rudder 7 3- Upset clamp of rudder 7 Upset clamp of elevator Device for mooring wing Protecting cover for front wheel tyre Service ladder Checks Towing trolley Gasoline can 5 3- Oil can 5 3- Cover of engine left exhaust tube 5 Cover of engine right exhaust tube Oil filler 5 3- Oil funnel for oiling rear case 5

16 3-5 Oil funnel for oiling front case Tail jack Midwing jack Headed jack Bag for log book Bag for big log book Oil radiator plug Oil radiator winter cloth Oil bag winter cloth cover P- Cloth cover P Oil tank cloth cover Winter cover for engine cowl Footrest Clamper for dismounting bearing of wheel axle Air charge clamper for buffer support Towing trolley Air charge splicing hose Trolley for oil collecting pan 66 6 STANDARD PARTS COMPARISON TABLE xi

17

18 STANDARD PARTS

19

20 NATIONAL STANDARD

21

22 Fig.- Hexagon nut GB5 Fig.- Butterfly nut GB6 Fig.-3 Split pin GB9 Fig.- Spring washer GB859 Fig.-5 Toothed elastic washer GB86 Fig.-6 Half-round head rivet GB867 5

23 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. Nomenclature No. Part No. Qty - GB5 (-) BM6GB5-5 7 Hexagon nut BM6GB5 6 Hexagon oblate BM8GB5-5 7 BM8GB5 8 nut BM0GB5-5 BM0GB5 6 BM.5GB5-5 BMGB5-5 BM.5GB5-5 BM3GB5-5 9 BM6GB5-LY-CZ BMGB5-5 8 BM5GB5-HPb59- BM5GB BM6GB5-HPb59- BM6GB GB6 BM8GB Butterfly nut BM5GB6-5 BM0GB5-5 BM6GB6-5 0 BM.5GB do L GB9 Split pin As reg. BMGB5-LY-CZ 0 - BMGB5-HPb59- GB5 Hexagon oblate BMGB5-5 nut BM5GB dgb859 Spring washer GB86 Toothed elastic GB86-65Mn washer 5GB86-65Mn As reg. 85 6

24 Fig.-7 Flat conical head rivet GB868 Fig counter-sunk rivet GB869 Fig.-9 0 countersunk half hollow rivet GB87 Fig.-0 Hollow rivet GB876 Fig.- Elastic stop ring GB89 for shaft Fig.- Small hexagon self-lock nut GB9 7

25 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty (-5) GB86 Toothed 6GB86-65Mn elastic washer GB87 0 d LGB87-LY countersunk half hollow rivet As req. -6 GB867-0 GB876 Half-round head d LGB867-LY Hollow rivet 3GB876 0 rivet d LGB867-MLC5 GB As req. 5GB GB868 5 GB876 6 Flat conical d LGB868-LY 5 5GB876 9 head rivet d LGB868-MLC5 5 8GB876 d LGB868-LF 6 5GB876 As req. - GB GB869 Elastic stop ring GB89-65Mn 6 90 counter- d LGB869-LY for shaft sunk rivet d LGB869-LF - GB9 d LGB869-MLC5 Small hexagon M3GB As req. self-lock nut MGB9-5 M5GB

26 Fig.-3 Light hexagon self-lock nut GB95 Fig.- Single lug self-lock anchor nut GB99 Fig.-5 Double lug plate self-lock anchor nut GB930 Fig.-6 0 counter-sunk rivet GB95 Fig.-7 Single lug self-lock anchor nut pad GB96 Fig.-8 Double lug self-lock anchor nut pad GB96 9

27 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty -3 GB GB95 MGB counter- d LGB95-LY Light hexagon M5GB95 73 sunk rivet d LGB95-MLC5 - self-lock nut M6GB95 M8GB95 GB GB96 Single lug GB96 self-lock anchor nut pad As req. 3 MGB99-MLC GB96 Single lug self-lock anchor nut M5GB99-MLC5 M6GB99-MLC5 0 Double lug self-lock anchor nut pad GB GB930-9 GB975 AM3GB930-MLC5 5 Tubular rivet 3GB975-0A Double lug AMGB930-MLC GB975-0A self-lock anchor AM5GB630-MLC GB975-0A 6 nut AM6GB930-MLC GB975-0A 6 GB975-0A 3 6 GB975-0A 0

28 Fig.-9 Tubular rivet GB975 Fig.-0 Small hexagon oblate nut GB007 Fig.- Big oblate round- head rivet GB0 Fig.- Headless rivet GB06 Fig.-3 Washer GB08 Fig.- Angle shaped outer tongue stop washer GB0

29 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty (-9) 6 3GB975-0A - GB0 Tubular rivet 6 7GB975-0A 7 Big oblate round- d LGB0-LY 6 8GB975-0A head rivet d LGB0-LF 6 3GB975-0A As req. 8 GB975-0A 8 8 9GB975-0A 0 - GB GB975-0A 0 Headless rivet 5 30GB GB975-0A -0 GB007 M6GB007-5 Small hexagon M6 GB007-5 oblate nut M8GB Washer GB BRGB08 5 BRGB GB M0GB GB M.5GB GB08-0 M6.5GB GB GB GB GB GB

30 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty (-3) 8 0.5GB (-3) 6 0.5GB Washer 8 0.8GB Washer 6 GB GB GB GB GB GB GB GB SGB08-0 GB SGB08-0.5GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB08-0 3

31 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty (-3) 0 GB08-0 (-3) 5.5GB08-0BB Washer GB08-0 Washer 6 0.5GB08LY-CZ GB GB08LY-CZ GB GB08LY-CZ GB GB08LY-CZ 5 0 GB GB08LY-CZ 3 8 GB08-0BB GB08LY-CZ 3 GB08-0BB GB08LY-CZ 7 3.5GB08-0BB BG08LY-CZ 6 8 GB08-0BB GB08LY-CZ 0 0.5GB08-0BB 3 8 GB08LY-CZ 0.5GB08-0BB 3 0.5GB08LY-CZ 5 GB08-0BB 8 0.5GB08LY-CZ 7 5 GB08-0BB 8 0.8GB08LY-CZ 6.5GB08-0BB 8 GB08LY-CZ GB08-0BB 6 0 GB08LY-CZ GB08-0BB 0.5GB08LY-CZ GB08-0BB 0.8GB08LY-CZ 35

32 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty (-3) GB08LY-CZ 30 (-3) 0 0.5GB08LY-CZ 0 Washer GB08LY-CZ Washer 0 0 GB08LY-CZ GB08LY-CZ 5 8.5GB08LY-CZ 5 GB08LY-CZ GB08LY-CZ 5.5GB08LY-CZ GB08H6-M 5 GB08LY-CZ 6 GB08LY-CZ 68 - GB0 6.5GB08LY-CZ 5 6GB0-0 6 GB08LY-CZ 8 Angle shaped 6 8 GB08LY-CZ outer tongue stop 6 8.5GB08LY-CZ washer 8 GB08LY-CZ GB08LY-CZ GB08LY-CZ GB08LY-CZ 8 8 GB08LY- CZ 0 8.5GB08LY-CZ GB08LY-CZ 3 5

33

34 - STANDARD PARTS CLASS I FASTENING PARTS 7

35

36 Fig.- Hexagon head bolt HB-0 Fig.- Taper-shaped bolt HB-5 Fig.-3 Taper-shaped bolt HB-6 Fig.- 90 countersunk bolt HB-9 Fig.-5 Cross- slot 0 half-countersunk bolt HB-37 Fig.-6 Hexagon screw HB-0 9

37 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty - HB-0 - HB-0 Hexagon head HB-0G5 HB bolt HB-0G5 6 5 Short thread HB HB-0G5 8 small-hexagon HB HB-0G5 30 bolt HB HB-0G5 6 7 HB HB-0G5 6 3 HB HB-0G5 8 HB HB-0G HB-0-6 HB-0G6 HB HB-0G HB HB-0G6 3 3 HB-0-6 HB-0G6 3 HB HB-0G6 36 HB-0G5 HB-0G6 38 HB-0G5 0 HB-0G6 0 3 HB-0G5 6 HB-0G6 6 HB-0G HB-0G6 58 HB-0G6 6 0

38 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty (-) HB-0G6 3 (-) (dc ) HB HB-0G6 30 HB Short thread HB-0G6 38 Grade (dc ) HB small-hexagon HB-0G6 3 hexagon bolt HB bolt HB-0G8 6 HB HB-0LA6 HB HB (dc ) HB-03 HB HB HB Grade (dc ) HB HB hexagon bolt HB HB HB HB HB-03-5 HB HB-03-6 HB HB HB HB HB HB HB HB HB

39 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty (-) (dc ) HB (-) (dc ) HB-03G8 6 HB Grade (dc ) HB Grade (dc ) hexagon bolt HB hexagon bolt HB HB-03-0 (dc ) HB-0 HB-03-0 HB HB HB HB Grade (dc ) HB HB short thread HB HB hexagon bolt HB HB-03G6 0 HB-0-5 HB-03G (dc ) HB HB-03G HB-03G HB-03G8 HB-03G8 HB-03G HB-06 Grade (dc ) HB-06-6 HB-06-8 small hexagon HB bolt HB HB HB

40 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty (-) (dc ) HB HB-5 HB Taper-shaped HB Grade (dc ) HB bolt HB-5-5 small hexagon HB HB bolt HB HB-5-6 HB HB HB HB HB HB-5G0 HB HB HB-6 HB Flat round HB-6-30 HB head bolt HB-6-6 HB HB HB HB-6G HB HB-6G 5 HB HB-6G 6 7 HB HB-6G 8 HB HB-6G 3

41 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty (-3) HB-6G Flat round head bolt HB-6G 6 HB-6G (-3) HB-6G8 6 Flat round head bolt HB-6G8 36 HB-6LA 0 HB-6G 3 8 HB-6LA HB-6G 3 HB-6G HB-9 90 countersunk bolt HB-9G 50 HB-6G 6 HB-6G5 0 HB-6G5 0 3 HB-6G5 HB-6G5 HB-6G5 8 HB-6G5 36 HB-6G5 66 HB-6G (dc ) HB-3 90 Grade (dc ) HB countersunk bolt 0 HB-37 Cross- slot 0 HB-37-6 half-countersunk bolt HB-0 Hexagon screw HB-0G-M 6 HB-6G6 0 HB-0G-M5 HB-6G6 30 HB-0G-M5 6 HB-6G HB-0G-M5 6

42 Fig.-7 Flat round head screw HB-0 Fig.-8 Cylinder screw with safety hole in the head HB-03 Fig.-9 Oblate round shaped screw HB-0 Fig countersunk screw HB-05 Fig.- 90 countersunk screw HB-07 Fig.- Cross-slot 0 half countersunk screw HB- 5

43 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty (-6) HB-0G-M5 30 (-7) HB-0G-M 9 Hexagon screw HB-0G-M5 3 Flat round HB-0G-M 0 90 HB-0G-M6 36 head screw HB-0G-M 6 HB-0G-M 08-7 HB-0 HB-0G-M 39 Flat round HB-0G-M3 6 6 HB-0G-M 6 3 head screw HB-0G-M3 8 7 HB-0G-M 8 HB-0G-M3 0 6 HB-0G-M 3 HB-0G-M3 0 HB-0G-M 6 HB-0G-M3 0 HB-0G-M 6 8 HB-0G-M3 6 6 HB-0G-M5 8 HB-0G-M3 0 3 HB-0G-M5 0 7 HB-0G-M3 3 HB-0G-M5 HB-0G-M3 6 HB-0G-M5 5 HB-0G-M 5 HB-0G-M5 9 HB-0G-M 6 0 HB-0G-M5 6 8 HB-0G-M 7 HB-0G-M5 8 0 HB-0G-M 8 9 HB-0G-M

44 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty (-7) HB-0G-M5-9 HB-0 Flat round HB-0G-M5 7 Oblate round HB-0G-M 6 8 head screw HB-0G-M5 30 shaped screw HB-0G-M 9 HB-0G-M6 HB-0G-M 0 78 HB-0G-M6 HB-0G-M 335 HB-0G-M6 6 3 HB-0G-M 9 HB-0G-M6 8 HB-0G-M 6 3 HB-0G-M6 36 HB-0G-M5 0 3 HB-0TA-M 0 HB-0G-M5 66 HB-0TA-M HB-0G-M5 78 HB-0TA-M HB-0G-M HB-03 HB-0G-M5 0 HB-03G-M 8 HB-0G-M5 6 6 Cylinder screw HB-03G-M 0 6 with safety hole HB-03G-M HB-05 in the head HB-03G-M countersunk HB-05G-M3 6 6 HB-03G-M5 3 3 screw HB-03G-M6 7

45 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty (-0) 90 HB-05G-M3 0 9 (-0) 90 HB-05G-M 90 countersunk HB-05G-M countersunk HB-05G-M6 screw HB-05G-M3 8 screw HB-05G-M HB-07 HB-05G-M countersunk HB-07G-M 0 5 HBI-05G-M 8 6 screw HB-05G-M 0-0 HB- HB-05G-M HB-G-M HB-05G-M 6 Cross-slot 0 HB-G-M 39 HB-05G-M 6 5 half countersunk HB-G-M 3 HB-05G-M 8 6 screw HB-G-M 8 HB-05G-M 0 6 HB-05G-M -3 HB-0 HB-05G-M Hexagon slit HB-0G-M5 HB-05G-M 6 8 thick nut HB-0G-M6 HB-05G-M 8 HB-0G-M8 6 HB-05G-M 30 HB-05G-M

46 Fig.-3 Hexagon slit thick nut HB-0 Fig.- Washer for taper bolt HB-50 Fig.-5 Arc-shaped washer for taper bolt HB-50 Fig.-6 Arc-shaped washer HB-503 Fig.-7 Pad HB-509 Fig.-8 Fiber board washer HB-50 9

47 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty -3 HB-0G (-3) HB-0G-M6.5 HB-0G-M5 Hexagon slit HB-0G-M8.5 Hexagon slit HB-0G-M6 oblate nut HB-0G-M.5 thick nut HB-0G-M8 6 - HB-50-3 HB-03 Washer for taper HB-50G-5 Hexagon slit HB-03G-M6 bolt HB-50G-8 nut HB-03G-M8 HB-03G-M0-5 HB-50 HB-50G 5-3 HB-0 Arc-shaped HB-50G6 35 HB-0G-M 8 washer for taper HB-50G8 55 Hexagon slit HB-0G-M5 8 bolt HB-50LB 35 oblate nut HB-0G-M6 03 HB-0G-M HB-503 HB-0G-M0 Arc-shaped HB-503G0.8 5 HB-0G-M.5 3 washer HB-503G 5 8 HB-0G-M.5 8 HB-503G

48 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty (-6) HB-503G HB-50 Arc-shaped HB-503G 5 38 Fiber board HB washer HBI-503G 8 35 washer HB HB HB-60 Pad HB HB-60LE5 5 HB-509GD8 Flat conical head HB-60LE5 8 HB-509GD8 hollow rivet HB-509GD0.5-0 HB-703 HB-509GD0 Flat head shaft HB-703G3 0 8 HB-509GD8.5 3 HB-703G 8 6 HB-509GD8 L HB-703G 9? HB-509GD.5BB HB-703G HB-509GD.5BB HB-703G 5 HB-509GD HB-703G 8 HB-509GD6 3 HB-703G 0 6 HB-509GD8 HB-703G 8 0 HB-703G 0 8 3

49 Fig.-9 Flat conical head hollow rivet HB-60 Fig.-0 Flat head shaft HB-703 Fig.- Stop block 3HB-70GD Fig.- Quick detachable spring pin HB-706 3

50 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty (-0) HB-703G HB-706 Flat head shaft HB-703G Quick detachable HB-706G8 9 HB-703G5 3 spring pin HB-703G5 8 HB-703G5 6 (-) HB-705GE HB-703G5 3 8 Ring HB-703G HB-703G HB-706G 9 HB-703G Pin HB-703G6 8.5 HB-703G HB HB-703G8 5.5 Spring HB-703G HB-70GD Stop block 33

51

52 STANDARD PARTS CLASS II AIRFRAME MEMBERS AND LOCK

53

54 Fig.3- Fixing angle HB- Fig.3- Fixing angle wide HB-3 Fig.3-3 Round ring HB- Fig.3- Ellipse ring HB-5 Fig.3-5 Aluminium alloy corrugated plate HB-8 Fig.3-6 Cloth cover HB-9 37

55 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty 3- HB- 3-6 HB-9 Fixing angle HB-- 0 Cloth cover HB-9-7 HB-- 30 HB-9-38 HB ( HB-3 HB-9-9 ) HB-3-0 HB-9-5 Fixing angle HB-3-0 HB-9-0 wide HB-3-30 HB-9- HB-3-30 HB-g HB- HB-9- Round ring HB HB- 3- HB-5 Pilot safety belt Ellipse ring HB HB- 3-5 HB-8 Pilot safety belt Aluminium alloy corrugated plate HB

56 Fig.3-7 Pilot safety belt HB- Fig.3-8 Pilot safety belt HB- 39

57 0 Fig.3-9 Shoulder strap of pilot safety belt 3HB-

58 Fig.3-0 Hinge HB- Fig.3- Hinge HB- Fig.3- Pivot HB-30A Fig.3-3 Pivot HB-30B Fig.3- Lock HB-3 Fig.3-5 Oblate round head screw HB-8 Fig.3-6 Countersunk screw HB-9

59 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty 3-9 3HB- 3- HB- Hinge HB Shoulder strap HB of pilot safety HB-- 70 belt HB-- 90 HB HB-0 HB-- 50 Hinge HB-0-30 HB-- 0 HB HB-- 80 HB-0-70 HB-- 0 HB-0-70 HB-- 60 HB-0-90 HB HB-0-90 HB HB-0-0 HB HB-0-3 HB HB-0-3 HB--8 0

60 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty 3- HB-30A 3- HB-3 Pivot HB-30A 50 Lock HB-30A 60 6 HB-30A HB-8 HB-30A 00 Oblate round HB HB-30A 50 head screw HB HB-30A 90 HB-30A HB-9 HB-30A 80 Countersunk HB-9-8 HB-30A.6 5 screw HB HB-30A3 0 HB-30A HB-5 HB-30A3 70 Short hollow HB-5-53 rivet HB HB-30B Pivot HB-30B 80 3

61 Fig.3-7 Short hollow rivet HB-5 Fig.3-8 Cloud-like lock spring HB-5 Fig.3-9 Chain HB-6 Fig.3-0 Chain HB-63 Fig.3- Spiral safety HB-6 Fig.3- Safety pin HB-65 Fig.3-3 Eyelet strap HB-66 Fig.3- Eyelet HB-66

62 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty 3-8 HB-5 3- HB-65 Cloud-like lock HB-5-50 Safety pin HB spring HB-5-6 HB HB HB-6 Chain HB HB-66 HB-6-00 Eyelet strap HB HB HB HB-63 Eyelet Chain 3-l HB-6 Spiral safety HB

63

64 3 STANDARD PARTS CLASS IV SPRINGS BUSHES AND CLAMPS 7

65

66 - HB3- Fig.- Cylinder coil compression spring HB3- Fig.- Cylinder coil extension spring HB3- Fig.-3 Press-in bush with convexity HB3-0 Fig.- Bush HB3- Fig.-5 grade bush HB3- Fig.-6 Copper bush HB3-9

67 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty - HB3- -3 HB3-0 HB HB3-0-6D Cylinder coil HB Press-in bush HB3-0-6D. compression HB with convexity HB3-0-6D.5 spring HB HB3-0-6D HB HB3-0-6D HB HB3-0-6D 5 HB HB3-0-8D.3 HB HB3-0-8D 8 HB HB3-0-8D 0 HB HB3-0-8D HB HB3-0TE-5D 3 HB HB3-0TE-0D 6 - HB3- HB3--A Bush HB3- Cylinder coil HB3--A. 0 5 HB extension spring HB HB

68 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty (-) HB B -5 HB3-3 Bush HB3--7 5B Press-in bush HB3-3TED HB3-G HB3-3TE8D 0 7 HB3-G5 8 0B HB3-G5 9 30B -6 HB3- HB3-G6 8 8 Copper bush HB HB3-G6 8 0 HB3-G HB3-9 HB3-G6 8 8 Hanging clamp HB-9G6 HB3-G6 9 3B HB3-9G8 HB3-G6 6 30B HB3-9G -5 HB3- -8 HB3-78 Grade bush HB3-G6 8 6 Snap for belt HB3-G HB3- HB3-G6 8 9 Belt HB3--60 HB3-G6 8 HB3--50 HB3-G8 0 8 HB

69 Fig.-7 Hanging clamp HB3-9 Fig.-8 Snap for belt HB3- Fig.-9 Belt HB3- Fig.-0 Welding clamp HB3- Fig.- Clamp ring HB3- Fig.- Holding clamp with washer HB3-5 5

70 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty (-9) HB (-) HB3-5-0B 5 Belt HB HB HB Holding clamp HB3-5-B HB with bonding HB piece HB3-5-B -0 HB3- HB3-5-6B Welding clamp HB B HB3-5- HB3-5-B 3 - HB3- HB3-5-6 Clamp ring HB B HB3-5-8 HB HB3-5-8B HB HB3-5 HB3-5-3 HB3-5-B HB3-5-3B Holding clamp HB HB with washer HB3-5-6B HB HB3-5 HB3-5-8B 0 Clamp belt HB

71 Fig.-3 Clamp belt HB3-5 Fig.- Single bolt side fixing clamp with ground connection HB3-6 Fig.-5 Rubber washer HB3-9 Fig.-6 Clamp for fixing cable HB3-3 Fig.-7 Special shaped clamp HB3-5

72 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty (-3) HB HB3-9 Clamp belt HB HB HB Rubber washer HB HB for holding clamp HB HB HB HB HB HB3-5-9 HB HB3-5-7 HB HB3-5-9 HB HB HB HB HB HB HB HB3-5- HB HB3-6 HB Single bolt side HB3-6-8 fixed clamp with HB3-6-8B ground connection HB3-6-B -6 HB HB3-3 Clamp for fixing HB3-3-8 cable HB

73 -8 HB3-A0 33 Fig.-8 Belt for fixing fuel tank HB3-A0 33 Fig.-9 Holding bolt 3HB3- Fig.-0 Shaft HB3- Fig.- Gasket 5HB3- Fig.- Hinge 6HB3-56

74 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty -6 HB HB3--M5 Clamp for fixing HB Holding bolt cable HB HB HB3-3-0 Shaft with right thread HB3-3- HB3-5 0 HB Shaft with left thread HB HB HB Hinge belt without HB3-3-5 pad -9 3HB3- -7 HB3- Holding bolt 3HB3--M5 Special shaped HB3-- 3HB3--M6 clamp HB HB3- -8 HB3-A0 33 Belt for fixing fuel tank Shaft HB HB HB3--0 HB3--M5 5 8 Hinge belt with pad HB3- -M

75 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty - 5HB3- -5 Q 5A3-5 Gasket 5HB3--0 Clamp Q 5A HB Q 5A Q 5A HB3- Q 5A3-5- Hinge 6HB3-- 6HB Q 5A3-8 Clamp Q 5A B -3 HB3-5 Holding clamp HB Q 5A3-9 Clamp Q 5A B - Q 5A3- Q 5A3--35-T-6-T -8 Q 5A3- Clamp for Q 5A3---T-63-T 9 Welding clamp Q 5A fixing pipe Q 5A3--53-T-6-T 3 Q 5A B Q 5A3--55-T-63-8-T Q 5A3-- 0B Q 5A3--6-T-65-T 7 Q 5A3-7-T-66-T 58

76 Fig.-3 Holding clamp HB3-5 Fig.- Clamp for fixing pipe Q/5A3- Fig.- Clamp Q/5A3-5 Fig.-6 Clamp Q/5A3-8 Fig.-7 Clamp Q/5A3-9 Fig.-8 Welding clamp Q/5A3- Fig.-9 Bush Q/5A3-7 59

77 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty -9 Q 5A3-7 (-9) Q 5A3-8G Bush Q 5A B Bush Q 5A3-8G Q 5A3-7G6-3-B Q 5A3-8G Q 5A3-7G6--6B Q 5A3-8G Q 5A3-7G8-5-B Q 5A3-7G8-6-B -9 Q 5A3-5 Q 5A3-7G8-6-30B Bush Q 5A3-5G Q 5A3-7G0-7-7B Q 5A3-5G-8--0 Q 5A3-7G0-7-6B Q 5A3-7G0-7-30B 3 Q 5A3-7G Q 5A3-7G0-7-36B Q 5A3-7G-6-9B Q 5A3-7G-6-0B -9 Q 5A3-8 Bush Q 5A3-8G Q 5A3-8G

78 STANDARD PARTS CLASS IV PIPE LINE PARTS AND SEALING PARTS OF AIR HYDRAULIC SYSTEM

79

80 Fig.5- Straight through pipe connector HB- Fig.5- Type B elbow pipe connector HB-0 Fig.5-3 Type B right angled pipe connector HB- Fig.5- Three-way pipe connector HB-7 Fig.5-5 Type B three-way pipe connector HB-0 Fig.5-6 Type B asymmetrical three-way pipe connector HB- 63

81 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty 5- HB- Straight through HB-- pipe connector HB B HB-0 Type B threeway pipe HB-0- connector 5- HB--0 B HB B HB- Type B asymmetrical HB-- three-way pipe connector Type B elbow HB HB-6 pipe connector HB-0-6 Four-way pipe HB-6- connector 5-3 B HB- 5-8 HB- Type B right HB- - 6 Nipple HB-G- angled pipe HB--6 HB-G-6 59 connector HB-G-0 HB-G- 5- HB-7 Three-way pipe HB HB-5 connector HB-7-6 Swivel nut HB-5-59 HB-5-6 6

82 Fig.5-7 Four-way pipe connector HB HB- Fig.5-8 Nipple HB- Fig.5-9 Swivel nut HB-5 Fig.5-0 Locking nut HB-6 Fig.5- Grip nut HB-9 Fig.5- Taper-thread straight-through pipe connector HB-60 65

83 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty (5-9) HB HB-6 Swivel nut HB-5- HB-6- Taper-thread HB HB-6 right angled knee Locking nut HB-6M 5 connector HB-6M 3 5- A HB-6- HB-6M6 HB-6M8.5 Type A taper thread knee 5- HB-9 connector Grip nut HB HB HB-60 HB-63- HB-60-3 Taper-thread Taper-thread HB-60-5 three-way pipe straight-through HB connector pipe connector 66

84 Fig.5-3 Taper-thread right angled knee connector HB-6 Fig.5- Type A taper-thread knee connector HB-6 Fig.5-5 Taper-thread three-way pipe connector HB-63 Fig.5-6 Type A taper-thread three-way pipe connector HB-6 Fig.5-7 Taper-thread four-way pipe connector HB HB-70 Fig.5-8 Valve oil syringe HB-70 67

85 5-9 Q/5A- Fig.5-9 Type nipple Q/5A- Fig.5- High-pressure hose Q/5A-3 Fig.5-0 Sealing rubber ring Q/5A-7 Fig.5- Spliced hose Q/5A-5 68

86 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty 5-6 A HB Q 5A- HB-6- Type nipple Q 5A-- 8 Type A taper thread 5-0 Q 5A-7 three-way pipe Sealing rubber 57 Q 5A~7-.6 connector ring 57 Q 5A Q 5A HB-65 Q 5A HB-65- Q 5A Taper-thread four-way pipe 5-l Q 5A-3 connector High-pressure Q 5A hose 5-8 HB Q 5A-5 Valve oil HB-70-0 Spliced hose Q 5A-5GT syringe 5-3 Q 5A-5 Spliced hose Q 5A-5-3M

87 Fig.5-3 Spliced hose Q/5A-5 Fig.5- Sleeve Q/5A-69 Fig.5-5 Sleeve Q/5A Q/5A-73 Fig.5-6 Nipple Q/5A-73 70

88 5-7 Q/5A-77 Fig.5-7 Nipple Q/5A Q/5A-79 Fig.5-8 Nipple Q/5A-79 Fig.5-9 Swivel nut Q/5A Q/5A-83 Fig.5-30 Inner taper nipple Q/5A-83 Fig.5-3 Sleeve Q/5A-85 7

89 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty (5-3) Q 5A-5-3M Q 5A-8 Spliced hose Q 5A-5-3M Swivel nut Q 5A-8- Q 5A Q 5A-69 Q 5A-8G- Sleeve Q 5A-69- Q 5A-8G-6 8 Q 5A Q 5A-8G-0 7 Q 5A-69- Q 5A-8G- Q 5A-8G Q 5A-73 Nipple Q 5A-73G Q 5A-83 Q 5A-73G0 6 Inner taped nipple 5-7 Q 5A-77 Nipple Q 5A Q 5A-85 Sleeve 5-8 Q 5A-79 Nipple Q 5A-79-7

90 5 STANDARD PARTS CLASS V CONTROL SYSTEM PARTS

91

92 Fig.6- Steel hoop HB5-5 Fig.6- Compression thimble of steel cable HB5-9 Fig.6-3 Small ball with ball headed cable HB5-7 Fig.6-5 Thimble HB5-7 Fig.6- Adjustable thread sleeve HB5- Fig.6-6 Eyelet connector for hoop HB5-8 75

93 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty 6- HB HB5- Steel hoop HB Adjustable thread HB5-A3 HB sleeve HB5-A6 3 HB HB HB5-7 HB5-5-8 Thimble HB5-7A3 HB5-7A HB5-9 Compression HB HB5-8 thimble of steel HB Eyelet connector HB5-8A3 cable HB for hoop HB5-8A6 3 HB HB5-8 A3 HB HB5-8 A6 HB HB HB5-7 Forked connector HB5-30B6 7 Small ball with ball headed cable HB

94 Fig.6-7 Fork connector HB5-30 Fig.6-8 Fork bolt HB5-37 Fig.6-9 Driving lever HB5- Fig.6-0 Clamp ring HB5- Fig.6- Stop pin 3HB5- Fig.6- Support washer HB5- Fig.6-3 Outer cover 5HB5-77

95 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty 6-8 HB Q 5A5- Fork bolt HB Control pull rod Q 5A Q 5A HB5- Q 5A Driving lever 6-0 HB Q 5A5-3 Clamp ring Control cable Q 5A HB5-6 Q 5A Stop pin Q 5A HB5- Q 5A Support washer 6-3 5HB5-6-7 Q 5A5-3 3 Outer cover 5HB5-- 5 Connector 6-8 Q 5A5-6- Q 5A5- Tube Q 5A5--70 Control pull rod Q 5A Q 5A5-5 5 Fork connector Q 5A

96 Fig.6- Control pull rod Q/5A5- Fig.6-5 Control pull rod Q/5A5-6-6 Q/5A5-3 Fig.6-6 Control cable Q/5A5-3 79

97 Fig.6-7 Connector Q/5A5-3 Fig.6-8 Tube Q/5A5- Fig.6-9 Fork connector Q/5A5-5 Fig.6-0 Pulley Q/8A5- Fig.6- Bush Q/8A5-80

98 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty 6-0 Q 8A5- Pulley Q 8A Bush Q 8A5- Q 8A5-- 6 Q 8A5-- 8

99

100 6 STANDARD PARTS CLASS VI PARTS OF ELECTRICAL INSTRUMENT AND RADIO EQUIPMENT

101

102 Fig.7- Wire pipe shaped connector HB6-6 Fig.7- Double claw wire connector HB6-7A Fig.7-3 Wire connector HB6-8 Fig.7- Damping washer HB6- Fig.7-5 Safeguard HB6-7 Fig.7-6 Rubber protecting sleeve HB6-3 85

103 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty 7- HB6-6 Wire pipe shaped HB6-6- connector 8 (7-3) HB6-8- Wire connector HB6-8-5 HB HB6-7A HB6-7A3 Double claw wire connector HB6-8 HB6-8- Wire connector HB Damping washer HB HB6- HB6-- 8 HB HB6-8- Safeguard HB6-7 HB6-8-7 HB HB6-3 HB6-8-9 Rubber HB HB6-8-3 protecting sleeve HB6-8- HB Bonding jumper BB6-39 HB HB HB HB HB

104 Fig.7-7 Bonding jumper HB6-39 Fig.7-8 Bonding jumper HB6-0 Fig.7-9 Nipple Q/5A6- Fig.7-0 Bush Q/5A6-8 Fig.7- Plug Q/8A6-87

105 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty (7-7) HB (7-0) Q 5A6-8-3 Bonding jumper HB Bush Q 5A6-8- HB Q 5A6-8-5 HB HB Q 8A6- HB Plug HB HB HB6-0 Bonding jumper HB Nipple Q 5A6- Q 5A Bush Q 5A6-8 Q 5A6-8- Q 5A

106 7 9 STANDARD PARTS CLASS VII IX

107

108 Fig.8- Error curve clip HB7- Fig.8- Double lug plate nut HB9-5 Fig.8-3 Angle Q/5A9-5 Fig.8- Eyelet Q/5A9-6 Fig.8-5 Fuel check valve Q/5A9-9

109 Fig.8-6 Ring Q/5A Q/5A9-7 Fig.8-7 Nipple Q/5A9-7 Fig.8-8 Buckle Q/5A9-35 Fig.8-9 Fuel tank placard Q/5A9-36 Fig.8-0 Placard Q/5A9-38 9

110 Fig. No. Loc. No. Nomenclature Part No. Qty Fig. No. Loc. No. Nomenclature Part No. Qty 8- HB Q 5A9-7 Error curve clip Nipple Q 5A HB9-5 Double lug HB9-5A-M Q 5A9-35 plate nut HB9-5B-M3 Buckle Q 5A9-35-A HB9-5B-M 3 Q 5A9-35-A0 Q 5A9-35-A6 8-3 Q 5A9-5 Q 5A9-35-B0 3 Angle 8-9 Q 5A Q 5A9-6 Fuel tank placard Eyelet Q 5A Q 5A9-38 Placard Q 5A Q 5A9- Q 5A9--3 Fuel check 8-6 valve Q 5A9-6 Ring Q 5A

111

112 TOOLS AND EQUIPMEN DELIVERED WITH AIRCRAFTT

113

114 UNIVERSAL TOOLS

115

116 Fig.- Fine file Fig.- Rat tail file Fig.-3 Oblate chisel 99

117 00 Fig.- Sharp nose pliers Fig.-5 Hand hammer Iron hammer

118 Fig.-6 Hammer for clock Fig.-7 Adjustable spanner 0

119 Fig.-8 Spanner Fig.-9 Ratchet spanner 0

120 Fig. No. Loc. No. Nomenclature Part No. Ref. Fig. Qty No. Material Remarks Fine file Finished product Rat tail file Finished product Oblate chisel Finished product Sharp nose pliers Finished product Hand hammer Finished product 50 Iron hammer Finished product Hammer for clock Finished product Adjustable spanner Finished product Spanner 7 Finished product 03

121 Fig. No. Loc. No. Nomenclature Part No. Ref. Fig. Qty No. Material Remarks Spanner 9 Finished product Spanner 7 Finished product B 8 0JB78-65 Spanner Finished product B JB78-65 Spanner Finished product Spanner 5 7 Finished product Spanner 9 Finished product Spanner 3 36 Finished product Ratchet spanner Finished product Single end bent hexagon spanner Finished product 0

122 Fig.-0 Single end bent hexagon spanner Fig.- Changeable head of ratchet spanner 05

123 Fig.- Box spanner Fig.-3 Handle 06

124 Fig.-5 Center punch Fig.-6 Nippers Fig.- Flat nose pliers 07

125 Fig.-7 Screw driver with wooden handle Fig.-8 Automatic screw driver 08

126 Fig.-9 Common screw driver with wooden Fig.-0 Cross-head screw driver 09

127 Fig. No. Loc. No. Nomenclature Part No. Ref. Fig. Qty No. Material Remarks Changeable head of ratchet spanner Finished product 55 7 Changeable head of ratchet spanner Finished product Box spanner Finished product Box spanner Finished product Box spanner Finished product Handle Finished product Handle Finished product Handle Finished product Universal flat nose Finished product 0

128 Fig. No. Loc. No. Nomenclature Part No. Ref. Fig. Qty No. Material Remarks - L 00 Flat nose Finished product Center punch Finished product -6 L 0mm Nippers Finished product -7 L 00mm Screw driver with wooden handle Finished product -8 L 500mm Automatic screw driver Finished product -9 Common screw driver with wooden handle L 30mm Finished product Common screw driver with wooden handle L 60mm Finished product Common screw driver with wooden handle L 00mm Finished product -0 Cross-head screw driver Finished product

129 Fig.- Common screw driver with wooden handle Fig.- Slip joint pliers

130 -3 Fig.-3 Sharp nose pliers Fig.- Feeler 3

131 Fig.-5 Working light Fig.-6 Electric iron

132 Fig.-7 Knife for electrician Fig.-8 Magnifying glass 5

133 Fig.-9 Steel tape Fig.-30 Test pencil 6

134 Fig.-3 Tyre manometer 7

135 Fig. No. Loc. No. Nomenclature Part No. Ref. Fig. Qty No. Material Remarks - Common screw driver with wooden handle L=50mm Finished product - Common screw driver with wooden handle L=300mm 50m m Finished product Slip joint pliers Finished product -3 50m m Sharp nose pliers Finished product mm Feeler Finished product -5 GZD- Working light Finished product -6 0V00W Electric iron Finished product V75W Electric iron Finished product -7 Knife for electrician Finished product 8

136 Fig. No. Loc. No. Nomenclature Part No. Ref. Fig. Qty No. Material Remarks -8 0 Magnifying glass Finished product -9 50mm Steel tape Finished product V Test pencil Finished product -3 Tyre manometer LY- Finished product 9

137

138 SPECIAL TOOLS

139

140 Fig.- Taper punch Fig.- Copper punch Fig.-3 Tool bag delivered with aircraft 3

141 Fig.- Moment spanner with scale

142 Fig.-5 Special spanner Fig.-6 Spanner for mounting and dismounting gill nut 5

143 -7 Fig.-7 Spanner for plug of cylinder No.6 Fig.-8 Box spanner 6

144 Fig.-9 S 36 oil filter spanner Fig.-0 Spanner for mounting and dismounting uplock emergency valve 7

145 Fig.- Double end hexagon box spanner Fig.- Special spanner for mounting & dismounting nose & main wheel shafts 8

146 Fig.-3 Double end hexagon spanner Fig.- Special spanner 9

147 Fig. No. Loc. No. Nomenclature Part No. Ref. Fig. Qty No. Material Remarks Taper punch Finished product Taper punch Finished product Copper punch Finished product A Tool bag delivered with aircraft Assembly Moment spanner with scale Finished product Special spanner Finished product Spanner for mounting and dismounting gill nut 6I 03 Finished product Spanner for plug of cylinder No.6 Finished product -8 6I 05 Box spanner Finished product 30

148 Fig. No. Loc. No. Nomenclature Part No. Ref. Fig. Qty No. Material Remarks -9 S S 36 oil filter spanner Finished product Spanner for mounting and dismounting uplock emergency valve Finished product Double end hexagon box spanner Finished product Double end hexagon box spanner Finished product Double end hexagon box spanner Finished product Special spanner for mounting & dismounting nose & main wheel shafts Finished product Double end hexagon spanner Finished product Special spanner Finished product Special spanner 6 03 Finished product 3

149 Fig.-5 Special spanner Fig.-6 Oil filter plug spanner 3

150 Fig.-7 I-shaped spanner Fig.-8 Special spanner 33

151 -9-0 Fig.-9 Sleeve head for propeller moment spanner Fig.-0 Changeable sleeve head 3

152 Fig.- Double end bent screw driver Fig.- Taper for splicing cable 35

153 Fig.-3 Tool for mounting leather cup Fig.- Punch mounting and dismounting nose wheel shaft 36

154 Fig.-5 Guide ring Fig.-6 Guide ring 37

155 38 Fig.-7 Grease gun

156 Fig.-8 Rod for mounting and dismounting wheel tyre Fig.-9 Spring for measuring force 5 0kg 39

157 Fig.-30 Kink tool 0 Fig.-3 Fixing clamp for splicing cable

158 Fig. No. Loc. No. Nomenclature Part No. Ref. Fig. Qty No. Material Remarks Special spanner Finished product A Oil filter plug spanner Finished product / 063 I-shaped spanner Assembly / 007 Special spanner Assembly / 056 Sleeve head for propeller moment spanner Assembly Changeable sleeve head Assembly Double end bent screw driver Assembly Taper for splicing cable Assembly Tool for mounting leather cup Assembly

159 Fig. No. Loc. No. Nomenclature Part No. Ref. Fig. Qty No. Material Remarks Punch for mounting and dismounting nose wheel shaft A Assembly Guide ring Assembly Guide ring Assembly A Grease gun Assembly Rod for mounting and dismounting wheel tyre 5 0kg Spring for measuring force 5 0kg A A Kink tool - -A Fixing clamp for splicing cable Assembly Assembly Assembly Assembly

160 EQUIPMENT DELIVERED WITH AIRCRAFT 3

161

162 Fig.3- Diagram of cloth covers 5

163 Fig. No. Loc. No. Nomenclature Part No. Ref. Fig. Qty No. Material Remarks 3- Diagram of cloth covers H Cloth cover for pitot Assembly H-90-0 Cloth cover for right outer wing Assembly 3 H Cloth cover for cockpit Assembly H-90-0 Cloth cover for horizontal tail Assembly 5 H Cloth cover for vertical tail Assembly 6 H-90-0 Cloth cover for left outer wing Assembly 7 8 H Cloth cover for main landing gear wheel H Assembly Cloth cover for fuselage Assembly 6

164 Fig. No. Loc. No. Nomenclature Part No. Ref. Fig. Qty No. Material Remarks 3-9 H Cloth cover for front damper strut Assembly 0 H Cloth cover for propeller Assembly 3- H Device for mooring fuselage Assembly 3-3 H Aileron clamp Assembly H Locking clamp of rudder Assembly 3- H Rudder clamp Assembly H Elevator clamp Assembly 3-5 H Device for mooring wing Assembly 3-6 Protecting cover for nose wheel tyre H Assembly 7

165 8 Fig.3- Device for mooring fuselage

166 Fig.3-3 Aileron clamp Locking clamp of rudder 9

167 50 Fig.3- Rudder clamp Elevator clamp

168 3-5 Fig.3-5 Device for mooring wing 3-6 Fig.3-6 Protecting cover for nose wheel tyre 5

169 Fig. No. Loc. No. Nomenclature Part No. Ref. Fig. Qty No. Material Remarks 3-7 H Service ladder Assembly 3-8 H A Chock Assembly 3-9 H Towing bar Assembly 3-0 H Gasoline can Assembly 3- H Oil can Assembly 3- H Cover of engine left exhaust tube Assembly H Cover of engine right exhaust tube Assembly 3-3 H Oil filling stool Assembly 3- H Oil funnel for oiling rear case Assembly 5

170 Fig. No. Loc. No. Nomenclature Part No. Ref. Fig. Qty No. Material Remarks 3-5 H Oil funnel for oiling front case Assembly 3-6 H Tail jack Assembly 3-7 H Midwing jack Assembly 3-8 H-9850-t00 Nose jack Assembly 3-9 H Bag for log book Assembly 3-0 H Bag for big log book Assembly 3- H-90]-50 Oil radiator plug Assembly 3- H Oil radiator winter cloth Assembly 3-3 Oil bag winter cloth cover H Assembly 53

171 5 Fig.3-7 Service ladder

172 Fig.3-8 Chock 55

173 56 Fig.3-9 Towing bar

174 Fig.3-0 Gasoline can Fig.3- Oil can 57

175 Fig.3-3 Oil filling stool Fig.3- Cover of engine left exhaust Cover of engine right exhaust 58

176 Fig.3- Oil funnel for oiling rear case Fig.3-5 Oil funnel for oiling front case 59

177 Fig.3-6 Tail jack 60

178 Fig.3-7 Midwing jack 6

179 Fig.3-8 Nose jack 6

180 Fig.3-0 Bag for big log book Fig.3-9 Bag for log book 63

181 Fig.3- Oil radiator plug 6 Fig.3- Oil radiator winter cloth

182 Fig.3-3 Oil bag winter cloth cover Fig.3- Cloth cover P- Fig.3-5 Oil tank cloth cover 65

183 Fig. No. Loc. No. Nomenclature Part No. Ref. Fig. Qty No. Material Remarks 3- P- H Cloth cover P- Assembly 3-5 H Oil tank cloth cover Assembly 3-6 H Winter cover for engine cowling Assembly 3-7 H Footrest Assembly H Clamp for dismounting bearing of wheel shaft H Air charging clamp for damp strut Assembly Assembly 3-30 H Towing bar Assembly 3-3 H A Air charging spliced hose Assembly 3-3 Trolley for oil collecting pan H Assembly 66

184 Fig.3-6 Winter cover for engine cowling 67

185 68 Fig.3-7 Footrest

186 Fig.3-8 Clamp for dismounting bearing of wheel shaft 69

187 70 Fig.3-9 Air charging clamp for damp strut

188 3-30 Fig.3-30 Towing bor 7

189 7 Fig.3-3 Air charging spliced hose

190 Fig.3-3 Trolley for oil collecting pan 73

191 STANDARD PARTS COMPARISON TABLE

192 Original standard No. New standard No. Comparsion basis Original standard No. New standard No. Comparsion basis HB-6Gd L HB-5Gd L HB-609-ddc L HB-609-df9 L HB-6Gd L C HB-5Gd L C HB-609-djf L HB-609-dr6 L HB-6-d L HB-5-d L HB-60-dd 6 L HB-60-dh L HB-6-d L C HB-5-d L C HB-60-ddc L HB-60-df9 L HB-6Fd L HB-5Fd L HB-60+djf L HB-60-dr6 L HB-6Fd L C HB-6LAd L HB-6LAd L C HB-6TAd L HB-5Fd L C HB-5LAd L HB-5LAd L C HB-5TAd L HB-6LHd HB-6-d HB-6TAd L C HB-5TAd L C BJ0-880 BJ0-880 HB-0G-d L HB-G-d L HB-70Gdje L HB-70Gdr6 L HB-0d L HB-d L HB-70dje L HB-70-dr6 L HB-0F-d L HB-F-d L HB-70HCdje L HB-70HCdr6 L HB-0A-d L HB-A-d L HB-70GFdje L HB-70-GFdr6 L HB-0TA-d L HB-TA-d L HB-70Gdjb 3 L HB-70Gdu8 L HB-50J d 0 HB-50- d 0 HB-603LE d 0 L HB-603- d 0 L HB-606FAD HB-606-D HB-609-dd 6 L HB-609-dh L HB-70-djb 3 L HB-70HCdjb3 L HB-70GFdjb3 L HB-70Gdga L HB-70du8 L HB-70HCdu8 L HB-70GFdu8 L HB-70Gdn6 L

193 Original standard No. New standard No. Comparsion basis Original standard No. New standard No. Comparsion basis HB-70-dga L HB-70-dn6 L HB HB-808-M5 HB-70HCdga L HB-70GFdga L HB-70HCdn6 L HB-70GFdn6 L HB-70Gdd L HB-70Gdh6 L HB-70-dd L HB-70-dh6 L HB-70HCdd L HB-70HCdh6 L HB-70GFdd L HB-70GFdh6 L HB HB HB-808-M6 HB-808-M3 HB-88FA HB-88FA-M HB-88FA5 HB-88FA-M5 HB-88FA6 HB-88FA-M6 HB-88GD HB-88GD-M HB-70G L HB-70GD L BJ0-880 HB-88GD5 HB-88GD-M5 BJ0-880 HB-70- L HB-70-D L HB-88GD6 HB-88GD-M6 3HB-70GD 3HB-70- HB-705GE HB-705- HB-706DdC L HB-706-Df9 L 3HB-88-3HB HB HB-88M 3HB-88M5 HB-88M6 HB-706G L HB-706GD L HB-3 H HB-3 - H HB-706- L HB-706-D L HB-5- HB-5LL- HB-706-DdC L HB-706-Df9 L 3HB-706HE 3HB-706- HB-805d HB-805-d HB-5F HB-5- HB-5F HB-5FD- HB-5LL- HB-5FD- HB-808- HDI-808-M HB3-0-dGb L h HB3-0HFdM7 L h

194 Original standard No. New standard No. Comparsion basis Original standard No. New standard No. Comparsion basis HB3-0-dD L h HB3-0HFdH7 L h HB3-3-dD D L HB3-3HFdH9 D L HB3-0-dD L h HB3-0HFdH9 L h HB3-3FdGb D L HB3-3FdM7 D L HB3-0FdGb L h HB3-QFdM7 L h HB3-3FdD D L HB3-3FdH7 D HB3-0FdD L h HB3-0FdH7 L h HB3-3FdD D L HB3-3FdH9 D I HB3-0FdD L h HB3-0FdH9 L h HB3-3TAdGb D L HB3-3TAdM7 D L HB3-0TAdGb L h HB3-0TAdM7 L h HB3-3TAdD D L HB3-3TAdH7 D L HB3-0TAdD L h HB3-0TAdH7 L h BJ0-880 HB3-3TAdD D L HB3-3TAdH9 D L BJ0-880 HB3-0TAdD L h HB3-0TAdH9 L h HB3-3TEdGb D L HB3-3TEdM7 D L HB3-0TEdGb L h HB3-0TEdM7 L h HB3-3TEdD D L HB3-3TEdH7 D L HB3-0TEdD L h HB3-0TEdH7 L h HB3-3TEdD D L HB3-3TEdH9 D L HB3-0TEdD L h HB3-0TEdH9 L h HB3-5GD B HB3-5GDD B HB3-Gd D L HB3-GDd D L HB3-5FD B HB3-5FDD B HB3-Gd D LB HB3-GDd D LBB HB3-5-D B HB3-5LBD B HB3--d D L HB3-HFd D L HB3-6GD HB3-6GDD HB3--d D LB HB3-HFd D LBB HB3-6-D HB3-6LBD HB3--d D L HB3-HFd D L HB3-7GD HB3-7GDD HB3-3-dGb D L HB3-3HFdM7 D L HB3-7-D HB3-7LBD HB3-3-dD D L HB3-3HFdH7 D L HB3-8GD HB3-8GDD 3

195 Original standard No. New standard No. Comparsion basis Original standard No. New standard No. Comparsion basis HB3-8-D HB3-8LBD HB3-7-D HB3-7LB-D HB3-9GD HB3-9GDD HB3-7-DB HB3-7LB-DB HB3-9-D HB3-9LBD HB3-7GD HB3-7GDD HB3--d BB HB3--d BBB HB3-7-D HB3-7LBDYZ HB3-5GD HB3-5GDD 6HB3-30 6HB3-30-M6 HB3-5GDB HB3-5GDDB BJ0-880 HB3-AB L L 3 HB3-AB L L BJ0-880 HB3-5-D HBS-5LBD HB3-BB L L 3 HB3-BB L L HB3-5-DB HB3-5GD HB3-5LBDB HB3-5GDD HB3--B L HB3--B L HB3--B L 3 HB3--B L HB3-5-D HB3-5LBDYZ HB-G d 0 Cd HB-G d 0 CdD HB3-6GD HB3-6GDB HB3-6GDD HB3-6GDDB HB-F d 0 HB-5G d 0 Cd HB-FA d 0 HB-5G d 0 CdD HB3-6-D HB3-6LBD HB-5F d 0 HB-5FA d 0 HB3-6-DB HB3-6LBDB HB-7G d 0 Cd HB-7G d 0 CdD HB3-6GD HB3-6GDD HB-7F d 0 HB-7FA d 0 HB3-6-D HB3-6LBDYZ HB-8G d 0 Cd HB-8G d 0 CdD HB3-7GD HB3-7GD-D HB-8F d 0 HB-8FA d 0 HB3-7GDB HB3-7GD-DB HB-0G d 0 Cd HB-0G d 0 CdD

196 Original standard No. New standard No. Comparsion basis Original standard No. New standard No. Comparsion basis HB-0Fd 0 HB-0FAd 0 HB-0Fd 0 HB-0FA d 0 HB-Gd 0 Cd HB-Gd 0 CdD HB-Gd 0 Cd HB-G d 0 CdD HB-Fd 0 HB-FAd 0 HB-Fd 0 HB-FA d 0 HB-3Gd 0 Cd HB-3Gd 0 CdD HB-Gd 0 Cd HB-G d 0 CdD HB-3Fd 0 HB-3FAd 0 HB-F d 0 HB-FA d 0 HB-G d 0 Cd HB-G d 0 CdD HB-3G d 0 Cd HB-3G d 0 CdD B-F d 0 HB-FA d 0 HB-3F d 0 HB-3FA d 0 HB-5G d 0 Cd HB-5G d 0 CdD BJ0-880 HB-6G d 0 Cd HB-6G d 0 CdD BJ0-880 HB-5F d 0 HB-5FA d 0 HB-6F d 0 HB-6FA d 0 HD-6G d 0 L Cd HB-6G d 0 L CdD HB-7G d 0 d 0 Cd HB-7G d 0 d 0 CdD HB-6Fd 0 L HB-6FA d 0 L HB-7F d 0 d 0 HB-7FA d 0 d 0 HB-7Gd 0 Cd HB-7Gd 0 CdD HB-8G d 0 d 0 Cd HB-8G d 0 d 0 CdD HB-7Fd 0 HB-7Fa d 0 HB-8F d 0 d 0 HB-8FA d 0 d 0 HB-8Gd 0 d 0 Cd HB-8G d 0 d 0 CdD HB-9G d 0 Cd HB-9G d 0 CdD HB-8Fd 0 d 0 HB-8FA d 0 d 0 HB-9F d 0 HB-9FA d 0 HB-9Gd 0 Cd HB-9Gd 0 CdD HB-6G-dCd HB-6G-dCdD HB-9Fd 0 HB-9FAd 0 HB-0Gd 0 Cd HB-0Gd 0 CdD HB-7G-dCd HB-7G-dCdD HB HB

untitled

untitled XT50GY PARTS CATALOGUE Kinroad xintian Motorcycle Manufacture co., ltd Content 1. HEADLIGHT01 15. SWING ARM21 2. SPEEDOMETER 02 16.BRAKE ARM23 3.TAIL LIGHT 03 17. FUEL TANK 25 4.TURNSIGNAL LIGHT04 18.

More information

TB015 Book No.PC3-101Z6 S N

TB015  Book No.PC3-101Z6 S N INDEX Item Part number Description Q'ty Chan. Serial No. Remarks 1 UNDERCARRIAGE 2 TURNTABLE & CONTROL LEVER 3 ENGINE & ELECTRICAL SYSTEM 4 HYDRAULIC PIPNG & TANK 5 COVER & CAB 6 HOE ATTACHMENT 7 DECAL

More information

Hooper Leo 2T reservedelsnumre

Hooper Leo 2T reservedelsnumre 1 QM50T-10R FIG1-1 11111QA06000 Cylinder head 2 QM50T-10R FIG1-2 11141QA06000 Gasket,cylinder head 3 QM50T-10R FIG1-3 05403Q011061 Nut M6 4 QM50T-10R FIG1-4 09482Q000803 Spark plug 5 QM50T-10R FIG1-5 11211QA06000

More information

CONTENTS D0-Page Cylinder Head D0-Page Cylinder D0-Page Camshaft D0-Page Cam Chain Tensioner D0-Page Crankcase D0-Page Oil Filter D0-Page Oil Pump D0-

CONTENTS D0-Page Cylinder Head D0-Page Cylinder D0-Page Camshaft D0-Page Cam Chain Tensioner D0-Page Crankcase D0-Page Oil Filter D0-Page Oil Pump D0- TDX-F THUMPSTAR ENGINE PARTS CONTENTS D0-Page Cylinder Head D0-Page Cylinder D0-Page Camshaft D0-Page Cam Chain Tensioner D0-Page Crankcase D0-Page Oil Filter D0-Page Oil Pump D0-Page Crankshaft/Piston

More information

CIM

CIM CIM STOCK LIST Photo Item No. Description Size Qty/pcs 3204-0401 keel roller,pu 196x77x16mm 220 3204-0403 keel roller,pu 295x85x16mm 252 3202-0405 keel roller,pu 125x72x16mm 2 3202-0404 keel roller,pu

More information

Microsoft Word - ROLLER 800 Spare Parts manual

Microsoft Word - ROLLER 800 Spare Parts manual ROL 800 Spare parts Pièces de rechange Reservdelar Spare part s Manual Manufacturer Uni-corp Europe S.A.R.L. Paclite Equipment 33 Avenue Pierre Brossolette, 94048 Créteil Cedex, FRANCE +33 (0) 1 49 81

More information

FIGURE A

FIGURE A RYOBI in. TABLE SAW MODEL NUMBER RTS1 REPAIR SHEET 5 5 51 1 5 50 55 5 5 5 5 0 0 0 55 5 5 5 5 0 1 1 1 1 1 5 0 1 5 1 0 5 0 1 1 0 1 1 1 11 1 1 1 15 FIGURE A The model number will be found on a label attached

More information

ZS-110-AUTO-AC Printable.xlsx

ZS-110-AUTO-AC Printable.xlsx E1 气缸头部件 CYLINDER HEAD ASSY. S1 S1-1 91192-D002-00000X BOLT M6 110 1 S1-2 B166740A06002070X BOLT M6 20 2 S1-3 93301-70651012000 WASHER 6.5 1 12 1 S1-4 11228-G011-01006U 01006U RIGHT COVER, CYLINDER HEAD

More information

Microsoft Word - GTR50 64A Engine.doc

Microsoft Word - GTR50 64A Engine.doc CONTENTS-ENGINE GROUP E1 GENERATOR & CRANKSHAFT E2 PISTON & DRIVE FACE STARTER CLUTCH OUTER ASSY E3 GTR-50 CYLINDER E4 CRANKCASE & OIL PUMP & CLUTCH & TRANSMISSION E5 R. CRANK CASE COVER E6 CARBURETOR

More information

Hooper One 4T reservedelsnumre

Hooper One 4T reservedelsnumre 1 QM50QT-2 FIG.E1-1 11310QB01000 Crankcase, right 1 2 QM50QT-2 FIG.E1-2 09319Q100801 Front rubber bush 20 3 QM50QT-2 FIG.E1-4 09206Q080801 Dowel pin 8 14 20 4 QM50QT-2 FIG.E1-5 09108Q070802 Stud 7 168

More information

untitled

untitled F3 F3 -- DA4G8 (ENGINE TYPE NUMBER) 4D 54A0004 54A0004 (PRODUCE GLIDE NUMBER) 5 2005 (2005 YEAR) 4 4 (APRIL) A0004 (PRODUCE ORDER NUMBER) The type number and the series number are marked on the left side

More information

untitled

untitled HYB10 四 冲 50 零 件 目 录 PARTS CATALOGUE 华 鹰 机 车 目 录 一 锁 总 成 LOCK ASSY-------------------------------------------------------------------------------------03 二 仪 表 METER-----------------------------------------------------------------------------------------------04

More information

300cc Engine.xls

300cc Engine.xls 0 0 cc Engine Update://00 E- CRANKCASE E- CYLINDER HEAD COVER, CYLINDER HEAD (Sport and Utility model for EEC Version) E- PISTON, CRANKSHAFT, CYLINDER E- R.CRANKCASE, WATER PUMP E- CVT E- GENERATOR, STARTER

More information

FIG. 2 CYLINDER & CRANKCASE1 汽缸头 NO. PIONEER CODE YAMAHA CODE PCS Cylinder assy двигатель в сборе

FIG. 2 CYLINDER & CRANKCASE1 汽缸头 NO. PIONEER CODE YAMAHA CODE PCS Cylinder assy двигатель в сборе SEA-PRO F2,5 КАТАЛОГ ЗАПЧАСТЕЙ FIG. 1 TOP COWLING 顶罩总成 NO. PIONEER CODE YAMAHA CODE PCS 154-01000 TOP COWLING assy 1 1 154-01001 00.02.25.09.0200 TOP COWLING 1 第 1 页, 共 18 页 FIG. 2 CYLINDER & CRANKCASE1

More information

katalog_182

katalog_182 YB50QT-9 零件目录 PARTS CATALOGUE 台州市凯通摩托车制造有限公司 TAIZHOU CITY KAITONG MOTORCYCLE MANUFACTURE CO.,LTD 目录 一 锁总成 LOCK ASSY-------------------------------------------------------------------------------------03

More information

PGO PMX (PM) reservedele

PGO PMX (PM) reservedele E1. CRANK CASE OIL PUMP ( PMS50/PMS110 ) P1061010000 RH CRANKCASE 1 P1062011000 LH CRANKCASE 1 BALL BEARING 2 E1062130000 BUSH 2 P1407430000 PIVOT, RR BRAKE SHOE 1 O RING 1 HEXAGON FLANGE NUT 1 P1062020000

More information

Product Catalogy 产 品 目 录 脊 柱 内 固 定 系 列 Spinal System 0 颈 椎 前 路 钢 板 I 型 Anterior cervical plate I 手 术 适 应 症 Indications. 创 伤 引 起 的 颈 椎 不 稳 Instability

Product Catalogy 产 品 目 录 脊 柱 内 固 定 系 列 Spinal System 0 颈 椎 前 路 钢 板 I 型 Anterior cervical plate I 手 术 适 应 症 Indications. 创 伤 引 起 的 颈 椎 不 稳 Instability Product Catalogy 产 品 目 录 脊 柱 内 固 定 系 列 Spinal System 0 颈 椎 前 路 钢 板 I 型 Anterior cervical plate I 手 术 适 应 症 Indications. 创 伤 引 起 的 颈 椎 不 稳 Instability caused by trauma 2. 颈 椎 前 后 凸 畸 形 矫 正 所 致 的 颈 椎 不 稳

More information

Side NO. Component and Parts No. Materiel Code Bestillingsnummer Delenavn Antall F QMA Shroud assy, Nether 1 F1

Side NO. Component and Parts No. Materiel Code Bestillingsnummer Delenavn Antall F QMA Shroud assy, Nether 1 F1 Sporto Victoria 2012 F1 Cover breathe & Cover shroud - 1 - Side NO. Component and Parts No. Materiel Code Bestillingsnummer Delenavn Antall F1 1 119020-139QMA-0000 3210200001255 103328 Shroud assy, Nether

More information

F-3 灯具及主电缆 (Lights and main cable) DD250E Headlight with cap DD250E(3) Headlight bulb 12V35W

F-3 灯具及主电缆 (Lights and main cable) DD250E Headlight with cap DD250E(3) Headlight bulb 12V35W F-2 车架 (Chasis) 1 1.23.02.0100000 DD250E-9A-0201-000 Chasis (BK) 1 2 1.01.02.0500300 DD250E-0205-003 Rubber motor mount 2 3 1.01.02.050000C DD250E-0205-000 Motor mount(bk) 1 4 1.01.14.0000300 DD250E-1400-003

More information

37 303020166 半 圆 头 方 颈 螺 栓 Square Neck Bolt 8SLJD08-18D 4 38 303070153 DB7650 滑 撬 ( 黑 色 ) Skid Shoe 8341-765001 2 39 303042023 平 垫 片 Flat Washer 8WF-0

37 303020166 半 圆 头 方 颈 螺 栓 Square Neck Bolt 8SLJD08-18D 4 38 303070153 DB7650 滑 撬 ( 黑 色 ) Skid Shoe 8341-765001 2 39 303042023 平 垫 片 Flat Washer 8WF-0 DB7651-24" list 1 303020281 外 六 角 螺 栓 Hex Washer Screw 8SFDD08-16D 6 2 303041022 弹 垫 圈 Washer 8WS-08D 6 3 303042023 平 垫 片 Flat Washer 8WF-08D 6 4 303070234 DB7650 轴 承 座 Bearing Housing 8145-765001 2 5

More information

ET LISTE BT125T-2 SMART RIDER xls

ET LISTE BT125T-2 SMART RIDER xls BAOTIAN SMART RIDER 00 BT-T BAOTIAN ERSATZTEILE LISTE SMART RIDER 00 BT T- -0-00 / BAOTIAN SMART RIDER 00 BT-T BTQMI-0000 F. Clamper Breather Tube BTQMI-0000 F. Shroud A BTQMI-0000 F. Duct Shroud BTQMI-0000

More information

CYLINDER HEAD EFI F C C EFI Cylinder Head (Bare) F

CYLINDER HEAD EFI F C C EFI Cylinder Head (Bare) F CYLINDER HEAD ASSEMBLY 1 1220A-004-0000 1220A-004-0000 500 Carburated Cylinder Head Assy (W/Valves) 1 1220A-004C-0000 1220A-004C-0000 500 EFI Cylinder Head Assy (W/vavles) 1 CYLINDER HEAD EFI 1 12200-F18-0000

More information

G5H3-6

G5H3-6 N O COLOR PARTS INDEX FOR " BS05W-8 " MODEL BS05W-8 BS05W-8 BS05W-8 BASIC COLOR BLUE/SILVER RED/SILVER SILVER/BLACK CODE BU-4035S/S-880S BLS R-010CA/S-880S RS S-880S/BK-0406S SBK Item Parts Number Description

More information

8016_2_1page

8016_2_1page VARICONTM PART NUMBERING SYSTEM 00 NO. NUMBER OF CONTACTS 20=020, 38=038, 56=056, 90=090, 120=120 CONTACT CODE INSULATOR V=Standard Type HV=For High Voltage ( ) ( NO. OF CONTACTS) 20,38,56,90,120 (PITCH

More information

CYLINDER ASSEMBLY 1 XS XR I BREATHER TUBE 1 TBA 2 XS40095 XR I CLIP 1 TBA 3 XS40096 XR I CLI

CYLINDER ASSEMBLY 1 XS XR I BREATHER TUBE 1 TBA 2 XS40095 XR I CLIP 1 TBA 3 XS40096 XR I CLI COOLING SHROUD 1 XS15501 XR15502 90212I0470000 UPPER SHROUD SEAL 1 R 73.33 2 XS10325 XR10325 B166740A0600187 BOLT M6 18 3 R 209.48 3 XS10326 XR10326 71119I0150000 NUT 4 TBA 4 XS10327 XR10327 12101I01500000C

More information

S.P.Catalog_V-BLADE250.2.xls

S.P.Catalog_V-BLADE250.2.xls F0 操 纵 F0 STEERING CONTROL F0 40070K2GP000 左 方 向 把 套 LEFT GRIP 2 F0 40450K23000 左 后 视 镜 组 件 LEFT MIRROR 3 F0 B0205060256L 内 六 角 螺 钉 M6X25 SCREW 6X25MM 2 4 F0 4003K2GP000 平 衡 块 BALANCE WEIGHT 2 5 F0 B04702554

More information

1

1 Application Chuck Instruction Manual Universal Ball Lock Power Chuck APPLICATION CHUCK PBL CHUCK (UNIVERSAL BALL LOCK POWER CHUCK) TABLE OF CONTENTS Keep this manual handy for easy reference as it will

More information

Spare Parts List for the following products Inhaltsverzeichnis Part No. Description Type Universal Tamp Applicator 1005L-100H Universa

Spare Parts List for the following products Inhaltsverzeichnis Part No. Description Type Universal Tamp Applicator 1005L-100H Universa Spare Parts List Universal Applicator with Lift Cylinder 1005 Spare Parts List for the following products Inhaltsverzeichnis Part No. Description Type 5950250 Universal Tamp Applicator 1005L-100H 5950253

More information

<474B3930B7A2B6AFBBFAD7D4B6AFB2A8CDBCB2E12E786C73>

<474B3930B7A2B6AFBBFAD7D4B6AFB2A8CDBCB2E12E786C73> 1 147FMF-010001 汽 缸 头 盖 CYCLDER HEAD COVER 1 2 147FMF-010002 汽 缸 头 盖 垫 片 GASGET 1 3 147FMF-010003 汽 缸 头 左 盖 L.COVER, CYCLDER HEAD 1 4 147FMF-010004 汽 缸 头 左 盖 垫 片 GASKET,L.COVER 1 5 147FMF-010005 汽 缸 头

More information

LTTH-product-bro

LTTH-product-bro 海 南 海 航 汉 莎 技 术 培 训 有 限 公 司 培 训 课 程 介 绍 飞 机 维 修 培 训 课 程 海 航 汉 莎 培 训 产 品 产 品 选 择 培 训 目 标 海 南 海 航 汉 莎 技 术 培 训 有 限 公 司 是 于 2007 年 由 德 国 汉 莎 技 术 培 训 和 海 航 集 团 共 同 出 资 建 立 的 一 家 专 门 从 事 民 用 航 空 维 修 培 训 的 中

More information

q7-chinesisch

q7-chinesisch Audi Q7 使 用 书 Audi Q7 Chinesisch 11.2006 2006 AUDI AG 奥 迪 股 份 公 司 对 所 有 车 型 都 在 不 断 进 行 后 续 开 发 公 司 可 能 随 时 改 进 产 品 的 外 形 装 备 和 技 术, 因 此 请 您 谅 解 本 操 作 手 册 的 数 据 附 图 和 不 能 作 为 提 出 任 何 要 求 的 依 据 未 经 奥 迪

More information

S7200A_JE.indd

S7200A_JE.indd S-7200A PARTS BOOK SINGLE NEEDLE DIRECT DRIVE STRAIGHT LOCK STITCHER WITH THREAD TRIMMER Parts Navigation http://partsbook.brother.co.jp/partsnavi/jpn/ The latest parts information, refer to the Parts

More information

目录

目录 JOHN DEERE WORLDWIDE COMMERCIAL & CONSUMER EQUIPMENT DIVISION OMTCU 19469 F4 Simplified Chinese OMTCU 19469 F4 Simplified Chinese !! -- 1200 PIN(010001-) ...1...7...9...15...16...17...19...24...27...28...30...32...34...37...39...42

More information

Brother BE-435C Parts Book

Brother BE-435C Parts Book KE-434C BE-435C PARTS BOOK KE-434C KE-435C ELECTRONIC LOCKSTITCH PATTERN TACKERKE-434C ELECTRONIC LOCKSTITCH PATTERN TACKER WITH STEPPING FOOT KE-435C Parts Navigation http://partsbook.brother.co.jp/partsnavi/jpn/index.html

More information

全唐诗28

全唐诗28 ... 1... 1... 1... 2... 2... 2... 3... 3... 4... 4... 4... 5... 5... 5... 5... 6... 6... 6... 6... 7... 7... 7... 7... 8... 8 I II... 8... 9... 9... 9...10...10...10...11...11...11...11...12...12...12...13...13...13...14...14...14...15...15...15...16...16...16...17...17

More information

BROTHER INDUSTRIES, LTD. S-7300A- P 3: 5: 0: 3: 3: 4:

BROTHER INDUSTRIES, LTD. S-7300A- P 3: 5: 0: 3: 3: 4: S-7300A 零 件 手 册 PARTS BOOK 电 子 送 布 直 驱 自 动 切 线 平 缝 机 SINGLE NEEDLE DIRECT DRIVE LOCK STITCHER WITH ELECTRONIC FEEDING SYSTEM AND THREAD TRIMMER 最 新 的 零 部 件 情 报 请 参 考 (Parts Navigation) The latest parts

More information

接线端子--Connectors规格书.doc

接线端子--Connectors规格书.doc Connectors with/without wire protector high-temperature resistant* High grade flexible strips Resistant to temperature up to 100 C (to 140 C) Multiple approvals Raised base Available with or without wire

More information

CL-68x00,00,00,00,00, CL-78x00,00,00,00,6000 Spindle 181mm mm Spindle bore 181mm is standard. 255,5 or 5mm is option. Chuck is optional. You ca

CL-68x00,00,00,00,00, CL-78x00,00,00,00,6000 Spindle 181mm mm Spindle bore 181mm is standard. 255,5 or 5mm is option. Chuck is optional. You ca CNC KINWA FLAT BED CNC LATHE CL-68x00 CL-68/CL-78 Series Swing 11, mm Between centers 00~7000mm Spindle bore 181, 255, 5, 5mm Spindle motor 60HP CL-68x00,00,00,00,00, CL-78x00,00,00,00,6000 Spindle 181mm

More information

509 (ii) (iii) (iv) (v) 200, , , , C 57

509 (ii) (iii) (iv) (v) 200, , , , C 57 59 (ii) (iii) (iv) (v) 500,000 500,000 59I 18 (ii) (iii) (iv) 200,000 56 509 (ii) (iii) (iv) (v) 200,000 200,000 200,000 500,000 57 43C 57 (ii) 60 90 14 5 50,000 43F 43C (ii) 282 24 40(1B) 24 40(1) 58

More information

Microsoft Word - MP2018_Report_Chi _12Apr2012_.doc

Microsoft Word - MP2018_Report_Chi _12Apr2012_.doc 人 力 資 源 推 算 報 告 香 港 特 別 行 政 區 政 府 二 零 一 二 年 四 月 此 頁 刻 意 留 空 - 2 - 目 錄 頁 前 言 詞 彙 縮 寫 及 注 意 事 項 摘 要 第 一 章 : 第 二 章 : 第 三 章 : 第 四 章 : 附 件 一 : 附 件 二 : 附 件 三 : 附 件 四 : 附 件 五 : 附 件 六 : 附 件 七 : 引 言 及 技 術 大 綱 人

More information

南華大學數位論文

南華大學數位論文 1 i -------------------------------------------------- ii iii iv v vi vii 36~39 108 viii 15 108 ix 1 2 3 30 1 ~43 2 3 ~16 1 2 4 4 5 3 6 8 6 4 4 7 15 8 ----- 5 94 4 5 6 43 10 78 9 7 10 11 12 10 11 12 9137

More information

李天命的思考藝術

李天命的思考藝術 ii iii iv v vi vii viii ix x 3 1 2 3 4 4 5 6 7 8 9 5 10 1 2 11 6 12 13 7 8 14 15 16 17 18 9 19 20 21 22 10 23 24 23 11 25 26 7 27 28 12 13 29 30 31 28 32 14 33 34 35 36 5 15 3 1 2 3 4 5 6 7 8 9 10 11

More information

皮肤病防治.doc

皮肤病防治.doc ...1...1...2...3...4...5...6...7...7...9...10... 11...12...14...15...16...18...19...21 I ...22...22...24...25...26...27...27...29...30...31...32...33...34...34...36...36...37...38...40...41...41...42 II

More information

性病防治

性病防治 ...1...2...3...4...5...5...6...7...7...7...8...8...9...9...10...10... 11... 11 I ...12...12...12...13...14...14...15...17...20...20...21...22...23...23...25...27...33...34...34...35...35 II ...36...38...39...40...41...44...49...49...53...56...57...57...58...58...59...60...60...63...63...65...66

More information

中国南北特色风味名菜 _一)

中国南北特色风味名菜 _一) ...1...1...2...3...3...4...5...6...7...7...8...9... 10... 11... 13... 13... 14... 16... 17 I ... 18... 19... 20... 21... 22... 23... 24... 25... 27... 28... 29... 30... 32... 33... 34... 35... 36... 37...

More information

全唐诗24

全唐诗24 ... 1... 1... 2... 2... 3... 3... 4... 4... 5... 5... 6... 6... 7... 7... 8... 8... 9... 9...10...10...10...11...12...12...12...13...13 I II...14...14...14...15...15...15...16...16...16...17...17...18...18...18...19...19...19...20...20...20...21...21...22...22...23...23...23...24

More information

一、

一、 ... 1...24...58 - 2 - - 3 - - 4 - - 5 - - 6 - - 7 - - 8 - i. ii. iii. iv. i. ii. iii. iv. v. vi. vii. viii. ix. x. - 9 - xi. - 10 - - 11 - -12- -13- -14- -15- C. @ -16- @ -17- -18- -19- -20- -21- -22-

More information

Gerolor Motors Series Dimensions A,B C T L L G1/2 M8 G1/ A 4 C H4 E

Gerolor Motors Series Dimensions A,B C T L L G1/2 M8 G1/ A 4 C H4 E Gerolor Motors Series Size CC-A Flange Options-B Shaft Options-C Ports Features 0 0 12 12 1 1 0 0 2 2 31 31 0 0 SAE A 2 Bolt - (2) 4 Bolt Magneto (4) 4 Bolt Square (H4) 1.0" Keyed (C) 2mm Keyed (A) 1.0'

More information

-i-

-i- -i- -ii- -iii- -iv- -v- -vi- -vii- -viii- -ix- -x- -xi- -xii- 1-1 1-2 1-3 1-4 1-5 1-6 1-7 1-8 1-9 1-10 1-11 1-12 1-13 1-14 1-15 1-16 1-17 1-18 1-19 1-20 1-21 2-1 2-2 2-3 2-4 2-5 2-6 2-7 2-8 2-9 2-10 2-11

More information

Microsoft Word - 强迫性活动一览表.docx

Microsoft Word - 强迫性活动一览表.docx 1 1 - / 2 - / 3 - / 4 - / 5 - I. 1. / 2. / 3. 4. 5. 6. 7. 8. 9 10 11. 12. 2 13. 14. 15. 16. 17. 18. 19. 20 21. 22 23. 24. / / 25. 26. 27. 28. 29. 30. 31. II. 1. 2 3. 4 3 5. 6 7 8. 9 10 11 12 13 14. 15.

More information

JS400ATV-2 EEC with price.xls

JS400ATV-2 EEC with price.xls 0ATV 欧 标 1 配 气 机 构 ( 汽 缸 盖 ) PENUMATIC MECHANISM(CYLINDER CAP) 1 F3-111000-0 汽 缸 盖 组 合 CYLINDER CAP ASSEMBLY 2 F3-111701-0 钢 丝 挡 圈 STEEL WIRE CIRELIP 3 F3-111751-0 气 门 导 管 GUIDE PIPE OF VALVE 4 Q/JR YP80-2000

More information

2. 我 沒 有 說 實 話, 因 為 我 的 鞋 子 其 實 是 [ 黑 色 / 藍 色 / 其 他 顏 色.]. 如 果 我 說 我 現 在 是 坐 著 的, 我 說 的 是 實 話 嗎? [ 我 說 的 對 還 是 不 對 ]? [ 等 對 方 回 答 ] 3. 這 是 [ 實 話 / 對 的

2. 我 沒 有 說 實 話, 因 為 我 的 鞋 子 其 實 是 [ 黑 色 / 藍 色 / 其 他 顏 色.]. 如 果 我 說 我 現 在 是 坐 著 的, 我 說 的 是 實 話 嗎? [ 我 說 的 對 還 是 不 對 ]? [ 等 對 方 回 答 ] 3. 這 是 [ 實 話 / 對 的 附 錄 美 國 國 家 兒 童 健 康 與 人 類 發 展 中 心 (NICHD) 偵 訊 指 導 手 冊 I. 開 場 白 1. 你 好, 我 的 名 字 是, 我 是 警 察 [ 介 紹 房 間 內 的 其 他 人, 不 過, 在 理 想 狀 態 下, 房 間 裡 不 該 有 其 他 人 ] 今 天 是 ( 年 月 日 ), 現 在 是 ( 幾 點 幾 分 ) 我 是 在 ( 地 點 ) 問 你

More information

User’s Manual

User’s Manual SNAP 500 打 印 机 用 户 手 册 1 用 户 手 册 SNAP TM 500 打 印 机 2015 年 8 月 24 日 AVERY DENNISON Manual Edition 2.5 2 SNAP 500 打 印 机 用 户 手 册 WARNING This device complies with Part 15 of the FCC Rules. Operation is subject

More information

TB5-QYK 拖拉机 目录 CONTENTS 序号 代码 页次 Page QC95T5-5-0 CYLINDER BLOCK QC95T5-5-0 CYLINDER HEAD COVER ASSEMBLY 5 QC95T5-5- TIMING GEAR CASE ASSEMBLY 7 QC95T5

TB5-QYK 拖拉机 目录 CONTENTS 序号 代码 页次 Page QC95T5-5-0 CYLINDER BLOCK QC95T5-5-0 CYLINDER HEAD COVER ASSEMBLY 5 QC95T5-5- TIMING GEAR CASE ASSEMBLY 7 QC95T5 Parts Catalogue of Foton (TB5-QYK) Foton Lovol International Heavy Industries Co.,Ltd TB5-QYK 拖拉机 目录 CONTENTS 序号 代码 页次 Page QC95T5-5-0 CYLINDER BLOCK QC95T5-5-0 CYLINDER HEAD COVER ASSEMBLY 5 QC95T5-5-

More information

<4D6963726F736F667420576F7264202D203938BEC7A67EABD7B942B0CAC15AC075B3E6BF57A9DBA5CDC2B2B3B92DA5BFBD542E646F63>

<4D6963726F736F667420576F7264202D203938BEC7A67EABD7B942B0CAC15AC075B3E6BF57A9DBA5CDC2B2B3B92DA5BFBD542E646F63> 98 年 3 月 11 日 依 本 校 98 學 年 度 招 生 委 員 會 第 1 次 會 議 核 定 大 同 技 術 學 院 98 學 年 度 重 點 運 動 項 目 績 優 學 生 單 獨 招 生 簡 章 大 同 技 術 學 院 招 生 委 員 會 編 印 校 址 :600 嘉 義 市 彌 陀 路 253 號 電 話 :(05)2223124 轉 203 教 務 處 招 生 專 線 :(05)2223124

More information

操 作 前 请 阅 读 全 部 说 明 ( 内 附 零 件 分 解 图 ) 警 告 在 进 行 本 电 动 螺 丝 起 子 任 何 维 修 之 前, 须 将 电 源 线 自 插 座 拔 离 若 非 合 格 维 修 技 师, 请 勿 尝 试 修 理 本 电 动 螺 丝 起 子 使 用 电 动 螺 丝

操 作 前 请 阅 读 全 部 说 明 ( 内 附 零 件 分 解 图 ) 警 告 在 进 行 本 电 动 螺 丝 起 子 任 何 维 修 之 前, 须 将 电 源 线 自 插 座 拔 离 若 非 合 格 维 修 技 师, 请 勿 尝 试 修 理 本 电 动 螺 丝 起 子 使 用 电 动 螺 丝 电 动 螺 丝 起 子 操 作 手 册 AC 电 源 半 自 动 TKS-1300LS TKS-1500LS 奇 力 速 电 动 工 具 ( 上 海 ) 有 限 公 司 地 址 : 上 海 市 嘉 定 区 徐 行 镇 新 建 二 路 367 号 电 话 :021-59556018 传 真 :021-59556015 OSH-D01 操 作 前 请 阅 读 全 部 说 明 ( 内 附 零 件 分 解

More information

2

2 . 3.. 6 2.1... 6 2.2... 6 2.3... 7 2.4... 9 2.5... 10 2.6... 12.. 13 3.1... 13 3.2... 16.. 18 4.1... 18 4.2... 20 4.3... 20 4.4... 23.. 25 5.1... 25 5.2... 27 5.3... 29 5.4... 31 5.5... 32.. 33 6.1...

More information

穨學前教育課程指引.PDF

穨學前教育課程指引.PDF i 1 1.1 1 1.2 1 4 2.1 4 2.2 5 2.3 7 2.4 9 2.5 11 2.6 1 2 1 5 3.1 1 5 3.2 1 5 19 4.1 19 4.2 19 4.3 2 1 4.4 29 4.5 38 4.6 4 3 4.7 47 50 5.1 5 0 5.2 5 0 5.3 6 2 5.4 9 4 5.5 1 2 6 ( ) 1 2 7 ( ) 1 31 ( ) 1

More information

眼病防治

眼病防治 ( 20 010010) 787 1092 1/32 498.50 4 980 2004 9 1 2004 9 1 1 1 000 ISBN 7-204-05940-9/R 019 1880.00 ( 20.00 ) ...1...1...2...3...5...5...6...7...9... 11...13...14...15...17...18...19...20...21 I II...21...22...23...24...25...27...27...28...29...30...31...33...33...34...36...38...39...40...41...42...43...45

More information

中国南北特色风味名菜 _八)

中国南北特色风味名菜 _八) ( 20 010010) 7871092 1/32 356.25 4 760 2004 8 1 2004 8 1 11 000 ISBN 7-204-05943-3/Z102 1026.00 ( 18.00 ) ...1...2...2...4...6...7...8...9... 10... 11... 12... 13... 13... 14... 15... 17... 18... 19...

More information

Tel:(852) Fax:(852) Truss Rivet Semi Tubular Rivets 尾孔 Truss Rivets 扁圓頭 JIS B1215 unit : mm diameter d Basic s

Tel:(852) Fax:(852) Truss Rivet Semi Tubular Rivets 尾孔 Truss Rivets 扁圓頭 JIS B1215 unit : mm diameter d Basic s Tel:(852)2896 391 Fax:(852)2897 357 Thin Round Rivet Semi Tubular Rivets 尾孔 Thin Round Rivets 薄圓頭 JIS B1215 unit : mm diameter 1.2 1.6 2 2.5 3 4 5 6 8 d Basic size 1.2 1.6 2 2.5 3 4 5 6 8 -.5 -.6 -.8 -.1

More information

Aragon CPI.xls

Aragon CPI.xls ENGINE PARTS LIST OF 50CC 气缸总成 CYLINDER HEAD ASSY 90A-025-0-00 HEAD,CYLINDER Aragon GP 90A-025-20-00 HEAD,CYLINDER Aragon S-line GASKET,CYLINDER 2 90A-08-00-00 Purple chrome HEAD 90A-23-00-00 SPARK PLUG(NGK-BR7ES)

More information

E15-3D1 1. Specifications Compact 4-Way Cassette type Model name MMU- AP0071MH2UL AP0091MH2UL AP0121MH2UL AP0151MH2UL AP0181MH2UL Cooling Capacity kbt

E15-3D1 1. Specifications Compact 4-Way Cassette type Model name MMU- AP0071MH2UL AP0091MH2UL AP0121MH2UL AP0151MH2UL AP0181MH2UL Cooling Capacity kbt E15-3D1 Compact 4-Way Cassette type MMU-AP0071MH2UL MMU-AP0091MH2UL MMU-AP0121MH2UL MMU-AP0151MH2UL MMU-AP0181MH2UL Contents 1. Specifications 2. Dimensions 3. Center of gravity 4. Piping diagram 5. Wiring

More information

39898.indb

39898.indb 1988 4 1998 12 1990 5 40 70.................................................. 40.............................................................. 70..............................................................

More information

穨ecr2_c.PDF

穨ecr2_c.PDF i ii iii iv v vi vii viii 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 1 26 27 2 28 29 30 31 32 33 34 35 36 37 38 39 40 3 4 41 42 43 5 44 45 46 6 47 48 49 50 51 52 1 53 2 54 55 3 56

More information

電腦相關罪行跨部門工作小組-報告書

電腦相關罪行跨部門工作小組-報告書 - ii - - iii - - iv - - v - - vi - - vii - - viii - (1) 2.1 (2) (3) 13.6 (4) 1.6 (5) 21 (6) (7) 210 (8) (9) (10) (11) ( ) ( 12) 20 60 16 (13) ( ) (

More information

i

i i ii iii iv v vi vii viii ===== 1 2 3 4 5 6 7 8 9 10 ==== 11 12 13 14 15 16 17 18 19 ==== ==== 20 .. ===== ===== ===== ===== ===== ======.. 21 22 ===== ===== ===== ===== 23 24 25 26 27 28 29 ==== ====

More information

发展党员工作手册

发展党员工作手册 发 展 党 员 工 作 问 答 目 录 一 总 论...9 1. 发 展 党 员 工 作 的 方 针 是 什 么? 如 何 正 确 理 解 这 个 方 针?... 9 2. 为 什 么 强 调 发 展 党 员 必 须 保 证 质 量?... 9 3. 如 何 做 到 慎 重 发 展?... 10 4. 如 何 处 理 好 发 展 党 员 工 作 中 的 重 点 与 一 般 的 关 系?...11 5.

More information

i

i 9 1 2 3 4 i 5 6 ii iii iv v vi vii viii 1 1 1 2 3 4 2 5 6 2 3 2.10 ( 2.11 ) ( 2.11 ) ( 2.9 ) 7 8 9 3 10 5% 2% 4 11 93% (2001 02 2003 04 ) ( ) 2,490 (100%) 5 12 25% (2.57% 25%) 6 (2001 02 2003 04 ) 13 100%

More information

Microsoft Word - 10-06-0186-D10-0627孙竹森.doc

Microsoft Word - 10-06-0186-D10-0627孙竹森.doc 第 34 卷 第 6 期 电 网 技 术 Vol. 34 No. 6 2010 年 6 月 Power System Technology Jun. 2010 文 章 编 号 :1000-3673(2010)06-0186-07 中 图 分 类 号 :TM 754 文 献 标 志 码 :A 学 科 代 码 :470 4051 输 电 线 路 钢 管 塔 的 推 广 与 应 用 孙 竹 森 1, 程

More information

目 录 院 领 导 职 责... 1 院 长 职 责... 1 医 疗 副 院 长 职 责... 1 教 学 副 院 长 职 责... 2 科 研 副 院 长 职 责... 2 后 勤 副 院 长 职 责... 3 主 管 南 院 区 副 院 长 职 责... 3 党 委 书 记 职 责... 4

目 录 院 领 导 职 责... 1 院 长 职 责... 1 医 疗 副 院 长 职 责... 1 教 学 副 院 长 职 责... 2 科 研 副 院 长 职 责... 2 后 勤 副 院 长 职 责... 3 主 管 南 院 区 副 院 长 职 责... 3 党 委 书 记 职 责... 4 目 录 院 领 导 职 责... 1 院 长 职 责... 1 医 疗 副 院 长 职 责... 1 教 学 副 院 长 职 责... 2 科 研 副 院 长 职 责... 2 后 勤 副 院 长 职 责... 3 主 管 南 院 区 副 院 长 职 责... 3 党 委 书 记 职 责... 4 纪 委 书 记 职 责... 5 院 长 办 公 室... 6 院 长 办 公 室 工 作 职 责...

More information

(i) (ii) (iii) (iv) (v) (vi) (vii) (viii) (ix) (x) (xi) 60.99%39.01%

(i) (ii) (iii) (iv) (v) (vi) (vii) (viii) (ix) (x) (xi) 60.99%39.01% 48.55% 1998 19986 30%20086 2009 2009 200 (i) (ii) (iii) (iv) (v) (vi) (vii) (viii) (ix) (x) (xi) 60.99%39.01% 200820092010 772 928960200820092010 1512928 201 1. 20091222(2009)7267 20042008 16,980,954.02

More information

3 /02/11/09 Page 1 HAND SOCKETS 1/2" METRIC SIZE - HEXAGON (6 point) A (MM) D1 (MM) D2 (MM)

3 /02/11/09 Page 1 HAND SOCKETS 1/2 METRIC SIZE - HEXAGON (6 point) A (MM) D1 (MM) D2 (MM) 鴻達銷售有限公司 Prestar Marketing Sdn. Bhd. (KL) LOT 17494, 8 1/2 MILES, JALAN IPOH, SELAYANG IND. ESTATE, 68100 BATU CAVES, SELANGOR DARUL EHSAN. TEL: (03) 610033 FAX: (3) 6136 3516/ 61 1355 / 61 5792 / 61 25

More information

II II

II II I I II II III 1. 2. 3. III 4. IV 5. 6. 8. 9. 10. 12. IV V V VI VI VII VII VIII VIII IX IX X X XI XI XII XII 1 1 2 2 3 3 4 33 35 4 5 5 6 6 7 ( ) 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17

More information

群科課程綱要總體課程計畫書

群科課程綱要總體課程計畫書 核 准 文 號 :102 年 4 月 22 日 臺 教 國 署 高 字 第 1020036237 號 國 立 曾 文 高 級 農 工 職 業 學 校 群 科 課 程 綱 要 總 體 課 程 計 畫 書 (102 學 年 度 入 學 學 生 適 用 ) 中 華 民 國 102 年 04 月 22 日 國 立 曾 文 高 級 農 工 職 業 學 校 群 科 課 程 綱 要 總 體 課 程 計 畫 書 核

More information

前 言 根 据 澳 门 特 别 行 政 区 第 11/1999 号 法 律 第 三 条 规 定, 审 计 长 执 行 其 职 责, 已 经 对 财 政 局 提 交 的 2011 年 度 澳 门 特 别 行 政 区 总 帐 目 ( 总 帐 目 ) 进 行 了 审 计 与 2010 年 度 相 同, 本 年 度 的 总 帐 目 由 政 府 一 般 综 合 帐 目 及 特 定 机 构 汇 总 帐 目, 两

More information

A B

A B ICS 77.140.01 H 40 GB GB/T 20566-2006 Terminology of steel and alloy 2006-11-01 2007-02-01 A B 1 2 GB/T 13304 GB/T 13304-1991,neq ISO 4948/1 1982 Steel-classification-Part 1 classification of steels into

More information

Microsoft Word - Panel Paper on T&D-Chinese _as at 6.2.2013__final_.doc

Microsoft Word - Panel Paper on T&D-Chinese _as at 6.2.2013__final_.doc 二 零 一 三 年 二 月 十 八 日 會 議 討 論 文 件 立 法 會 CB(4)395/12-13(03) 號 文 件 立 法 會 公 務 員 及 資 助 機 構 員 工 事 務 委 員 會 公 務 員 培 訓 及 發 展 概 況 目 的 本 文 件 介 紹 公 務 員 事 務 局 為 公 務 員 所 提 供 培 訓 和 發 展 的 最 新 概 況, 以 及 將 於 二 零 一 三 年 推 出

More information

E- CYLINDER HEAD BACK E- CYLINDER HEAD 0-E-000 HEAD ASS'Y, cylinder 00-E-000 GASKET, cylinder head -E-000 HOUSING,camshaft intake -E-0 HOUSING,camshaf

E- CYLINDER HEAD BACK E- CYLINDER HEAD 0-E-000 HEAD ASS'Y, cylinder 00-E-000 GASKET, cylinder head -E-000 HOUSING,camshaft intake -E-0 HOUSING,camshaf E- CYLINDER COVER BACK E- CYLINDER COVER -E-000 COVER COMP, cylinder head -E-000 GASKET, cylinder head cover -- Bolt,Hex.Socker Ladder No. (M*) -0- Bolt,Hex.Socker Ladder No. (M*) 0-E-000 WASHER, cylinder

More information

绝妙故事

绝妙故事 980.00 III... 1... 1... 4... 5... 8...10...11...12...14...16...18...20...23...23...24...25...27...29...29...31...34...35...36...39...41 IV...43...44...46...47...48...49...50...51...52...54...56...57...59...60...61...62...63...66...67...68...69...70...72...74...76...77...79...80

More information

2015年廉政公署民意調查

2015年廉政公署民意調查 報 告 摘 要 2015 年 廉 政 公 署 周 年 民 意 調 查 背 景 1.1 為 了 掌 握 香 港 市 民 對 貪 污 問 題 和 廉 政 公 署 工 作 的 看 法, 廉 政 公 署 在 1992 至 2009 年 期 間, 每 年 均 透 過 電 話 訪 問 進 行 公 眾 民 意 調 查 為 更 深 入 了 解 公 眾 對 貪 污 問 題 的 看 法 及 關 注, 以 制 訂 適 切

More information

榫 卯 是 什 麼? 何 時 開 始 應 用 於 建 築 中? 38 中 國 傳 統 建 築 的 屋 頂 有 哪 幾 種 形 式? 40 大 內 高 手 的 大 內 指 什 麼? 42 街 坊 四 鄰 的 坊 和 街 分 別 指 什 麼? 44 北 京 四 合 院 的 典 型 格 局 是 怎 樣 的

榫 卯 是 什 麼? 何 時 開 始 應 用 於 建 築 中? 38 中 國 傳 統 建 築 的 屋 頂 有 哪 幾 種 形 式? 40 大 內 高 手 的 大 內 指 什 麼? 42 街 坊 四 鄰 的 坊 和 街 分 別 指 什 麼? 44 北 京 四 合 院 的 典 型 格 局 是 怎 樣 的 目 錄 中 華 醫 藥 以 醫 術 救 人 為 何 被 稱 為 懸 壺 濟 世? 2 什 麼 樣 的 醫 生 才 能 被 稱 為 華 佗 再 世? 4 中 醫 如 何 從 臉 色 看 人 的 特 質? 6 中 醫 怎 樣 從 五 官 看 病? 8 中 醫 看 舌 頭 能 看 出 些 什 麼 來? 10 中 醫 真 的 能 靠 一 個 枕 頭, 三 根 指 頭 診 病 嗎? 12 切 脈 能 判 斷

More information

_Chi.ps, page Preflight ( _Chi.indd )

_Chi.ps, page Preflight ( _Chi.indd ) on conviction3 5 1. / 2. 14 3. 2 2 3 4. 372 12 5. 6. 1 7. 1 2 i ii iii iv 8. 9. 1 12 2 2 i ii iii i ii iii 3 iv http://www.pcpd.org.hk v i ii iii 4 i ii i / ii 5 1. 2. 3. i ii iii iv v vi 4. 5. 6 6. 7.

More information

Giantco Venus reservedele

Giantco Venus reservedele DOC INDEX: PC-HY50QT-6e (VERSION: 3.8) PREPARED BY: LHY, Chirs 小 龟 零 件 目 录 CHECKED BY: LHY, Chris DATE OF ISSUE: 13 December 2007 Parts Catalogue: VENUS (HY50QT-6e) (Version: 3.8 ) 1 Date of issue: 13

More information

尿路感染防治.doc

尿路感染防治.doc ...1...1...2...4...6...7...7...10...12...13...15...16...18...19...24...25...26...27...28 I II...29...30...31...32...33...34...36...37...37...38...40...40...41...43...44...46...47...48...48...49...52 III...55...56...56...57...58

More information

天主教永年高級中學綜合高中課程手冊目錄

天主教永年高級中學綜合高中課程手冊目錄 天 主 教 永 年 高 級 中 學 綜 合 高 中 課 程 手 冊 目 錄 壹 學 校 背 景. 貳 教 育 理 念 與 教 育 目 標. 3 一 規 劃 理 念...3 二 教 育 目 標...3 參 畢 業 要 求. 5 一 總 學 分 數...5 二 必 選 修 學 分 數...5 三 必 須 參 加 活 動...9 四 成 績 評 量 方 式...9 肆 課 程 概 述.. 9 一 課 程

More information

心理障碍防治(下).doc

心理障碍防治(下).doc ( 20 010010) 787 1092 1/32 498.50 4 980 2004 9 1 2004 9 1 1 1 000 ISBN 7-204-05940-9/R 019 1880.00 ( 20.00 ) ...1...2...2...3...4...5...6...7...8...9...10... 11...12...13...15...16...17...19...21 I ...23...24...26...27...28...30...32...34...37...39...40...42...42...44...47...50...52...56...58...60...64...68

More information

穨_2_.PDF

穨_2_.PDF 6 7.... 9.. 11.. 12... 14.. 15.... 3 .. 17 18.. 20... 25... 27... 29 30.. 4 31 32 34-35 36-38 39 40 5 6 : 1. 2. 1. 55 (2) 2. : 2.1 2.2 2.3 3. 4. ( ) 5. 6. ( ) 7. ( ) 8. ( ) 9. ( ) 10. 7 ( ) 1. 2. 3. 4.

More information

(Chi)_.indb

(Chi)_.indb 1,000,000 4,000,000 1,000,000 10,000,000 30,000,000 V-1 1,000,000 2,000,000 20,000,00010,000,0005,000,000 3,000,000 30 20% 35% 20%30% V-2 1) 2)3) 171 10,000,00050% 35% 171 V-3 30 V-4 50,000100,000 1) 2)

More information

14A 0.1%5% 14A 14A.52 1 2 3 30 2

14A 0.1%5% 14A 14A.52 1 2 3 30 2 2389 30 1 14A 0.1%5% 14A 14A.52 1 2 3 30 2 (a) (b) (c) (d) (e) 3 (i) (ii) (iii) (iv) (v) (vi) (vii) 4 (1) (2) (3) (4) (5) 400,000 (a) 400,000300,000 100,000 5 (b) 30% (i)(ii) 200,000 400,000 400,000 30,000,000

More information

Microsoft Word - Paper on PA (Chi)_2016.01.19.docx

Microsoft Word - Paper on PA (Chi)_2016.01.19.docx 立 法 會 發 展 事 務 委 員 會 二 零 一 六 年 施 政 報 告 及 施 政 綱 領 有 關 發 展 局 的 措 施 引 言 行 政 長 官 在 二 零 一 六 年 一 月 十 三 日 發 表 題 為 創 新 經 濟 改 善 民 生 促 進 和 諧 繁 榮 共 享 的 二 零 一 六 年 施 政 報 告 施 政 報 告 夾 附 施 政 綱 領, 臚 列 政 府 推 行 的 新 措 施 和

More information

Page i

Page i 况 1 1.1.1 1.1.2 1.1.3 2 2.1 2.1.1 2.1.2 2.1.3 2.1.4 Page i 2.2 2.2.1 2.2.2 2.2.3 2.2.4 2.2.5 2.2.6 2.3 2.3.1 Page ii 2.3.2 2.3.3 2.3.4 2.4 2.4.1 2.4.2 2.4.3 Page iii 2.5 2.5.1 2.6 2.6.1 2.6.2 3 3.1 3.1.1

More information

Microsoft Word - Entry-Level Occupational Competencies for TCM in Canada200910_ch _2_.doc

Microsoft Word - Entry-Level Occupational Competencies for TCM in Canada200910_ch _2_.doc 草 稿 致 省 級 管 理 單 位 之 推 薦 書 二 零 零 九 年 十 月 十 七 日 加 拿 大 中 醫 管 理 局 聯 盟 All rights reserved 序 言 加 拿 大 中 醫 管 理 局 聯 盟, 於 二 零 零 八 年 一 月 至 二 零 零 九 年 十 月 間, 擬 定 傳 統 中 醫 執 業 之 基 礎 文 件 由 臨 床 經 驗 豐 富 之 中 醫 師 教 育 者 及

More information

世界名画及画家介绍(四).doc

世界名画及画家介绍(四).doc II...1...2...2...3...4...5...7...7...8...9...9...10... 11...12...13...14...15...15...16...18...18...19...20 III...21...21...22...24...24...25...26...27...28...29...30...30...31...33...33...34...35...36...36...37...38...39...40...41...42...43

More information

捕捉儿童敏感期

捕捉儿童敏感期 目弽 2010 捕捉儿童敏感期 I a mao 2010-3-27 整理 早教资料每日分享 http://user.qzone.qq.com/2637884895 目弽 目彔 目弽... I 出版前言... - 1 竨一章 4 丢孝子癿敂感朏敀乞... - 1 - 妞妞 0 4 岁 海颖 妞妞癿妈妈... - 1 黑白相亝癿地斱... - 1 斵转... - 2 就丌要新帰子... - 2 小霸王...

More information

(i) (ii) (iii) (iv) (v) (vi) (vii) (viii) (ix) (x) (i) (ii)(iii) (iv) (v)

(i) (ii) (iii) (iv) (v) (vi) (vii) (viii) (ix) (x) (i) (ii)(iii) (iv) (v) 1948 12 1 1986 1 1995 1995 3 1995 5 2003 4 2003 12 2015 82015 10 1 2004 2 1 (i) (ii) (iii) (iv) (v) (vi) (vii) (viii) (ix) (x) (i) (ii)(iii) (iv) (v) (vi) (vii)(viii) (ix) (x) (xi) 2013 8 15 (i) (ii) (iii)

More information

ZNLB 150T-E.xls

ZNLB 150T-E.xls ZN150T-E 大龟王 150CC F1 方向把 - 开关 Hander-switch 1 150T-E/017 R handle cove 1 2 150T-E/016 Hander comp.steeling 1 3 150T-E/126 R handle combination switch 1 4 GB818-85 Screw 4 5 150T-E/042 Fixing seat upper,

More information

--------------------------------------------------------------------------- --------------------------------------------------------------------- ----

--------------------------------------------------------------------------- --------------------------------------------------------------------- ---- http://210.69.121.61/bulletin/ Index.asp --------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------

More information

TNT 300.xlsx

TNT 300.xlsx SPARE PARTS CATALOG TNT300 COLOR WHITE GRAPHITE BLACK RED GOLDEN BLACK GREEN CODE WF BC F9 ML B8 GT PICTURE COLOR WHITE BLACK GREEN GRAPHITE BLACK RED GOLDEN CODE WF B8 GT BC F9 ML RKX300 JCK(Q19-01)-BJ300GS-1A

More information

樹 木 管 理 專 責 小 組 報 告 人 樹 共 融 綠 滿 家 園

樹 木 管 理 專 責 小 組 報 告 人 樹 共 融 綠 滿 家 園 樹 木 管 理 專 責 小 組 報 告 人 樹 共 融 綠 滿 家 園 序 言 我 們 都 愛 樹, 愛 那 鬱 鬱 葱 葱 的 綠 意, 愛 那 股 清 新 的 氣 息, 更 愛 那 溽 暑 中 遍 地 搖 曳 的 斑 斕 樹 蔭 人 與 樹 本 應 是 那 麼 近, 但 去 年 8 月 赤 柱 塌 樹 意 外, 卻 令 我 們 赫 然 發 現, 樹 木 原 來 也 可 以 潛 藏 著 危 險,

More information