东莞市宏凯光电有限公司 DongGuan HONG KAI OPTO-ELECTRONIC Co., Ltd 触摸屏规格承认书 Specification of Touch Panel 机种编号 / Model No.:HK70D R2459-COFK70DR2459-PG-V01 版本号 / Customer s P/N: V1 客户名称 /Customer Name: 客户型号 /Customer No.: Approve by Designed by 电话 :0769--82693718 传真 :0769--82693728 地址 : 广东省东莞市黄江镇黄京坑村百顺工业区 8 号 客户确认 /Customer Approve: 确认时间 /Approve Date:
Revision Sheet 变更单 Revision No. 版本号 Date 日期 Content 变更内容 Reason 变更原因 Sign 签名 Ver.1 2016-02-24 原版发行 Remark/ 备注 : 1
Table of contents 目录 1 Sample Specification 样品规格 1.1 Product name Code No. 品名编号 1.2 Scope 适用范围 1.3 Features and General Specifications 特征和规格 1.4 Environment Conditions 环境参数 1.5 Mechanical characteristics 机械性能 1.6 Electric characteristics 电器性能 2 Appearance limit standard 外观检验标准 2.1 Scope 适用范围 2.2 Inspection Conditions 检测条件 2.2-1 Scratch 刮伤 2.2-2 Dot-like Foreign Matter 点状杂物 2.2-3 Linear Foreign Matter 线状杂物 2.2-4 OCA bubbles and bend 透明胶汽泡 / 变形 2.2-5 Dot-like Foreign Matter 2.2-6 Chip And Crack 碎裂 破损 2.2-7 others 3 Reliant condition 信赖性条件 4 Engineering Drawing 工程图 Warranty Products manufactured to these specifications shall be capable of meeting all characteristics delivery onwards or for a minimum period of 1 year of the customer received when stored and used as specified under normal conditions within the contents of these sheets. 保质期 此规格触摸屏, 从出货之日起或客户收到产品后, 至少一年内应符合下列正常条件下的储存和使用规格 1 Sample Specification 样品规格 1.1 Product name Code No.: Transparent touch panel 品名编号 : 透明轻触开关 1.2 Scope 适用范围 This specification shall apply to metal pen or finger input transparent capacitive touch panel. 本规格书为用专用金属笔或手指操作的电容式透明轻触开关 1.3 Features and General Specifications 特征和规格 Features 特征 2
Construction 结构 Materials used 所用材料 Comment 注释 Graphic overlay pet 面板 PET Thickness:0.25mm 厚度 :0.25mm Graphic overlay OCA 透明胶 Adhesive 粘胶 Thickness:0.125mm 厚度 :0.125mm TOP Glass Back tape ITO 玻璃 背胶 Thickness:1.1mm 厚度 :1.1mm Thickness:0.175mm 厚度 :0.175mm General Specifications 规格 (L=long 长 ; W=wide 宽 ; T= thickness 厚 ) Item 项目 Specifications 规格 Unit 单位 TP Outline 外形尺寸 184.44(L) 104.24(W) 1.5 (T) mm TP Sensor 外形尺寸 176.94(L) 98.74(W) 1.5 (T) mm Viewing Area 可视区 154.96(L) 86.42(W) mm Active Area 驱动区 155.96(L) 87.42(W) mm 1.4 Environment Conditions 环境参数 Items 项目 Operating temperature & Humidity 工作温湿度范围 -20 -+70 : Storage temperature & Humidity 储存温湿度范围 -30 -+80 : Value 值 1.5 Mechanical characteristics 机械性能 Items 项目 Optical characteristics 光学特性 Hardness 表面硬度 Value 值 Transparency 透明度大于 85% 3H 1.6 Electric characteristics 电气性能 Items Supply voltage Value 值 2.8-3.6V(DC) 2 Appearance limit standard 外观检验标准 2.1 Scope 范围 Touch panel visible side. 产品的可视区 3
2.2 Inspection conditions 检测条件 (1) The brightness in text site:500lux 光照条件 :500LUX (2) Inspection distance:30cm 检测距离 :30cm (3) visual angle:>60 度检测角度 : >60 度 (4) light source:40w natural light 电源强度 : 40W A source of light(12-20w) 光源 200-400mm Eyes 眼睛 300-500mm 45 (Remark: D=diameter 直径 ;L=length 长度 ;W=width 宽 ;GT=glass thickness 玻璃总厚 ) 2.2-1 visual area 透明可视区 Scratch 刮伤 线状缺陷 ( 刮伤 ) Linear Defects(Scratch) 允收 :[accept] 1. 3.5 寸 ~5.0 寸 1.1 W 0.03 mm 忽略不计.[ignore it] 1.2 0.03 mm<w 0.05mm,L 8.0 mm, 允许 2 个, 但间 10mm. [allow 2,but distance 10mm] 1.3 0.05mm<W 0.07mm,L 8mm 允许 1 条.[allow 1] 2. 5.0 寸以上 2.1 W 0.03 mm 忽略不计. [ignore it] 2.2 0.03 mm<w 0.05mm,L 8.0 mm, 允许 4 个, 但 间距 10mm. [allow 2,but distance 10mm] 2.3 0.05mm<W 0.07mm,L 8mm 允许 2 条.[allow 2] 拒收 :[Reject] W>0.07mm,L>8mm 4
2.2-2 Dot-like Foreign Matter 点状杂物 点状不良 ( 白点 黑点 凹凸 点 尘埃粒子 ) Dot defect (White dot, Black dot, Particle) 允收 :[accept] 1. 3.5 寸 ~5.0 寸 1.1 Ø 0.15 mm, 忽略不计, 但不能聚集 ; [ignore it,but not together] 1.2 0.15 mm<ø 0.30 mm, 允许 2 个, 最小间距 10mm [Allow 2, Distance 10 mm] 1.3 0.30 mm<ø 0.40 mm, 允许 1 个 [Allow 1] 2. 5.0 寸以上 2.1 Ø 0.15 mm, 忽略不计, 但不能聚集 ; [ignore it,but not together] 2.2 0.15 mm<ø 0.30 mm, 允许 4 个, 最小间距 10mm [Allow 4, Distance 10 mm] 2.3 0.30 mm<ø 0.40 mm, 允许 2 个 [Allow 2] 拒收 : 超过上述范围拒收 2.2-3 Linear Foreign Matter 线状杂物 线状缺陷 ( 毛屑等异物 ) Linear Defects(Fiber) Reject: not in above criterion 允收 :[accept] 1. 3.5 寸 ~5.0 寸 1.1 W 0.03 mm 忽略不计.[ignore it] 1.2 0.03 mm<w 0.04mm,L 5.0 mm, 允许 2 个, 但间距 10mm. [allow 2,but distance 10mm] 1.3 0.04mm<W 0.06mm,L 5.0mm 允许 1 条.[allow 1] 2. 5.0 寸以上 2.1 W 0.03 mm 忽略不计. [ignore it] 2.2 0.03 mm<w 0.04mm,L 5.0 mm, 允许 4 个, 但间距 10mm. [allow 2,but distance 10mm] 2.3 0.04mm<W 0.06mm,L 8mm 允许 2 条.[allow 2] 拒收 :[Reject] W>0.06mm,L>5mm 2.2-4 OCA bubbles and bend 透明胶汽泡 / 变形 4. 气泡 Bubble 允收 :[accept] 1. 3.5 寸 ~5.0 寸 1.1 Ø 0.15 mm, 忽略不计, 但不能聚集 [ignore it,but not together] 1.2 0.15 mm<ø 0.20 mm, 允许 2 个, 最小间距 10mm [Allow2,Distance 10mm] 1.3 0.20 mm<ø 0.30 mm, 允许 1 个 [Allow 1] 5
2. 5.0 寸以上 2.1 Ø 0.15 mm, 忽略不计, 但不能聚集 [ignore it,but not together] 2.2 0.15 mm<ø 0.20 mm, 允许 4 个, 最小间距 10mm [Allow4,Distance 10mm] 2.3 0.20 mm<ø 0.30 mm, 允许 2 个 [Allow 2] 拒收 :[Reject] D>0.30mm Non- visual area(overlay) 非透明可视区 ( 面版 ) 2.2-5 Dot-like Foreign Matter 点状杂物 D<0.2mm 直径 <0.2mm 0.2mm<D<0.3mm 0.2mm< 直径 <0.3mm Two objects are allowed. 允许有两个存在 ; Ignored 可忽略 D>0.3mm 直径 >0.3mm The T/P is regarded as a defect. T/P 属不良品 2.2-6 Chip And Crack 碎裂 破损 Corner fragment: X<2.0mm and Y<2.0mm and Z<GT it is ignored 1) Corner fragment in the golden finger that seriously affects the product function is regarded as a defect. 2) Corner fragment in the circuit that seriously affects product function is regarded as a defect. 角断裂 :X<2.0mm,Y<2.0mm 和 Z<GT, 可以忽略 1) 若角断裂位于金手指处, 严重影响产品的功能,T/P 属不良品 ; 2) 若角断裂位于线路上, 严重影响产品的功能,T/P 属不良品 Side fragment: X<5.0mm and Y<1.0mm and Z<GT it is ignored 1) Side fragment in the golden finger that seriously affects the product function is regarded as a defect. 2) Side fragment in the circuit that seriously affects product function is regarded as a defect. 边断裂 :X<5.0mm,Y<1.0mm 和 Z<GT, 可以忽略 1) 若边断裂位于金手指处, 严重影响产品的功能,T/P 属不良品 ; 2) 若边断裂位于线路上, 严重影响产品的功能,T/P 属不良品 6
2.2-7 others: This specification is considered as basic on the products, but details are subject to discussion upon individual customer requirement. 其它 : 此承认书基本满足产品特性要求, 若有其它问题可针对客户实际要求进行协商 3 Reliant Condition 信赖性条件 No. Item Test Condition Note 1 High After exposing at 60 for 64 hours and at Temperature normal temperature and humidity for 24 hours. Operating 2 Low Temperature After exposing at -10 for 64 hours and at Operating normal temperature and humidity for 24 hours.(except for dew gathering) 3 High After exposing at 60,80%RH for 64 hours(after Temperature dehumidifying in the chamber 60 and 50% High Humidity Operating 4 High Temperature Storage 5 Low Temperature Storage 6 High Temperature High Humidity Storage 7 Touch panel Surface Intensity test max.) and at normal temperature and humidity for 24 hours.(except for dew gathering) After exposing at 60 for 64 hours and at normal temperature and humidity for 24 hours. After exposing at -10 for 64 hours and at normal temperature and humidity for 24 hours. After exposing at 60,90%RH for 64 hours and at normal temperature and humidity for 24 hours.(except for dew gathering) Testing condition: No glass breaks when 64g,30cm steel ball is dropped vertically on the center fo panel surface which glass thickness is 0.55-3.0mm from 30cm height one time 4.Attachment 附件. Engineering drawing 工程图 7