CE_2018_33570.xlsm

Similar documents
CE_2018_41760.xlsm

CE_2018_31141.xlsm

CE_2015_C2868.xlsm

CE_2014_53244.xlsm

CE_2017_94775.xlsm

检测报告 Test Report 报告编号 SCL01I E 第 1 页共 7 页 Report No. SCL01I E Page 1 of 7 申请单位 Applicant 地址 Address 珠海松田电工有限公司 ZHUHAI SUNTEK WIRE CO.,

CE_2017_23712.xlsm

CE_2016_56269.xlsm

SCL01G047136

Microsoft Word - Formosa Plastics_ _RoHS_ch

CY_2016_60916.xlsm

A E.docx

CS Signature Not Verified For Question, Please Contact with SGS BOURNS, INC COLUMBIA AVE.RIVERSIDE, CA 92507, USA No. CE

Certificate of non-use for examining part

Microsoft Word - I-037封面

Mag Layers Scientific-Technics

CHK EE General 1(Dev)

doc

APPLICANT:

CTS_EE_General

Microsoft Word - its8951.doc

CTS_EE_General_V2012_CC

Celebrity Int’l Inc.

KA_2019_21558A-01.xlsm

CE_2009_55055.xls

Bourns® Multifuse® PPTC Resettable Fuses

新版承認書封面.doc

<4D F736F F D D CCECB9A4B2E2BFD F485320C9A8C3E82BBBAFB2E22BB5E7B3D8D6B8C1EE202020D6D0CEC42043>

CTS_EE_General

Microsoft Word - 研華承認書

Microsoft Word - HC20138_2010.doc

HC70044_2008

HCD0174_2008

RoHS Version

22 DX-X0LIOGBXB5AJ-I00 23 DX-XAE005AA DX-X0LIIEBSJ5AA-I11 25 DX-X0LIOGGXB5AA 26 DX-X0LICCGXB5AP-I00 27 DX-X0LICCBXB500-I10 28 TRS D

佛山研讨会资料第二部分.ppt

HC50246_2009

HC20131_2010

GB Sparkle

CTS_EE_General_V2012_CC

HC70245_2008

HC80279_2007

2-289 GC-MS 10 min % Dr Ehrenstorfer Gmbh DUP 97 0% -D4 Di-n-butyl phthalate- D4 DnBP-D % Sigma-Aldrich SIM 50 ~ 500 Amu - 20 EM Au

Microsoft Word - DIN-422 spec.doc

???`???~

东莞龙昌智能技术研究院

Microsoft Word - its5599.doc

台中市夜市 傳統市場 攤販處 高風險食材或原物料抽驗結果-po網.xls

Microsoft Word - its5507.doc

<4D F736F F D20ACFCAE65A4FEAFC52DB2C4A447B3A1A5F E31312E3239A44AAE77AAA9B6C2A5D52E646F63>

Microsoft Word _editing.doc

HistoCore ArcadiaH Instruction for Use, V1.8, RevK

9202reply-s.doc

IP4212_3BB74XP_03_ qxp

TAIWAN SEMICONDUCTOR CO., LTD.

TAIWAN SEMICONDUCTOR CO., LTD.

CHTW.indd

Microsoft Word - its3639.doc

!! "#$% & ()*+,-. &/ 00 " %0#0 % 00 " %0#0 %1% 2 %1$ 2 % )869:;.,*8656<,*= 9*>? *> A6)5, B,55, C,*D, B6 E)*)7)55) " F9D,

第十七屆空氣污染控制技術研討會

NIDEC SANKYO 环 境 关 连 物 质 管 理 基 准 2/14 1. 环 境 关 连 物 质 管 理 的 考 虑 方 法 NIDEC SANKYO 的 环 境 关 连 物 质 对 应 产 品 所 使 用 的 部 品 材 料 补 材 捆 包 材 以 及 制 造 工 程 中 所 使 用 的

食品中塑化劑衛教手冊

Microsoft Word - Lenovo_L14M4P23 (Y51)_4S1P_UN38.3 Test Report_SLEU

CM1950 Instructions for Use, V 1.8, RevI

OVLFx3C7_Series_A3_bgry-KB.pub


untitled

060522達文西密碼_全_.PDF

Transcription:

頁數 (Page) 1 of 8 以下測試樣品係由申請廠商所提供及確認 (The following sample(s) was/were submitted and identified by/on behalf of the applicant as) 送樣廠商 (Sample Submitted By) 樣品名稱 (Sample Description) 樣品型號 (Style/Item No.) 收件日期 (Sample Receiving Date) 2018/03/13 測試期間 (Testing Period) () POLYCARBONATE ( 聚碳酸酯樹脂 ) TAIRILITE AC3610 2018/03/13 TO 2018/03/19 ================================================================================================================ 測試需求 (Test Requested) 測試方法 (Test Method) 依據客戶指定, 參考 RoHS2011/65/EU Annex II 及其修訂指令 (EU) 2015/863 測試鎘 鉛 汞 六價鉻 多溴聯苯 多溴聯苯醚, DBP, BBP, DEHP, DIBP. (As specified by client, with reference to RoHS 2011/65/EU Annex II and amending Directive (EU) 2015/863 to determine Cadmium, Lead, Mercury, Cr(VI), PBBs, PBDEs, DBP, BBP, DEHP, DIBP contents in the submitted sample(s).) 請參閱下一頁 (Please refer to following pages). 測試結果 (Test Results) 請參閱下一頁 (Please refer to following pages). 結 論 (Conclusion) 根據客戶所提供的樣品, 其鎘 鉛 汞 六價鉻 多溴聯苯 多溴聯苯醚, DBP, BBP, DEHP, DIBP 的測試結果符合 RoHS 指令暨 (EU) 2015/863 之限值要求. (Based on the performed tests on submitted sample(s), the test results of Cadmium, Lead, Mercury, Cr(VI), PBBs, PBDEs, DBP, BBP, DEHP, DIBP comply with the limits as set by RoHS and amending Directive (EU) 2015/863.)

頁數 (Page) 2 of 8 測試結果 (Test Results) 測試部位 (PART NAME)No.1 白色塑膠粒 (WHITE PLASTIC PELLETS) 鎘 / Cadmium (Cd) 鉛 / Lead (Pb) 汞 / Mercury (Hg) 測試項目 (Test Items) 六價鉻 / Hexavalent Chromium Cr(VI) ( ) 單位 (Unit) 測試方法 (Method) 參考 IEC 62321-5 (2013), 以感應耦合電漿原子發射光譜儀檢測. / With reference to IEC 62321-5 (2013) and performed by ICP-AES. 參考 IEC 62321-5 (2013), 以感應耦合電漿原子發射光譜儀檢測. / With reference to IEC 62321-5 (2013) and performed by ICP-AES. 參考 IEC 62321-4 (2013), 以感應耦合電漿原子發射光譜儀檢測. / With reference to IEC 62321-4 (2013) and performed by ICP-AES. 參考 IEC 62321-7-2 (2017), 以 UV-VIS 檢測 ; 參考 IEC 62321-5 (2013), 以 ICP- AES 檢測. / With reference to IEC 62321-7-2 (2017) and performed by UV-VIS.;With reference to IEC 62321-5 (2013) and performed by ICP- AES. 方法偵測極限值 (MDL) 結果 (Result) 限值 (Limit) No.1 2 n.d. 100 2 n.d. 1000 2 n.d. 1000 8 n.d. 1000

頁數 (Page) 3 of 8 測試項目 (Test Items) 多溴聯苯總和 / Sum of PBBs 一溴聯苯 / Monobromobiphenyl 二溴聯苯 / Dibromobiphenyl 三溴聯苯 / Tribromobiphenyl 四溴聯苯 / Tetrabromobiphenyl 五溴聯苯 / Pentabromobiphenyl 六溴聯苯 / Hexabromobiphenyl 七溴聯苯 / Heptabromobiphenyl 八溴聯苯 / Octabromobiphenyl 九溴聯苯 / Nonabromobiphenyl 十溴聯苯 / Decabromobiphenyl 多溴聯苯醚總和 / Sum of PBDEs 一溴聯苯醚 / Monobromodiphenyl ether 二溴聯苯醚 / Dibromodiphenyl ether 三溴聯苯醚 / Tribromodiphenyl ether 四溴聯苯醚 / Tetrabromodiphenyl ether 五溴聯苯醚 / Pentabromodiphenyl ether 六溴聯苯醚 / Hexabromodiphenyl ether 七溴聯苯醚 / Heptabromodiphenyl ether 八溴聯苯醚 / Octabromodiphenyl ether 九溴聯苯醚 / Nonabromodiphenyl ether 十溴聯苯醚 / Decabromodiphenyl ether 單位 (Unit) 測試方法 (Method) 參考 IEC 62321-6 (2015), 以氣相層析 / 質譜儀檢測. / With reference to IEC 62321-6 (2015) and performed by GC/MS. 方法偵測極限值 (MDL) 結果 (Result) 限值 (Limit) No.1 - n.d. 1000 - n.d. 1000

頁數 (Page) 4 of 8 測試項目 (Test Items) 鄰苯二甲酸丁苯甲酯 / BBP (Butyl Benzyl phthalate) (CAS No. 85-68- 7) 鄰苯二甲酸二丁酯 / DBP (Dibutyl phthalate) (CAS No. 84-74-2) 鄰苯二甲酸二異丁酯 / DIBP (Diisobutyl phthalate) (CAS No. 84-69-5) 鄰苯二甲酸二 (2- 乙基己基 ) 酯 / DEHP (Di- (2-ethylhexyl) phthalate) (CAS No. 117-81-7) 單位 (Unit) 測試方法 (Method) 參考 IEC 62321-8 (2017), 以氣相層析儀 / 質譜儀檢測. / With reference to IEC 62321-8 (2017). Analysis was performed by GC/MS. 方法偵測極限值 (MDL) 結果 (Result) 限值 (Limit) No.1 50 n.d. 1000 50 n.d. 1000 50 n.d. 1000 50 n.d. 1000 備註 (Note) 1. = ppm;0.1wt% = 1000ppm 2. n.d. = Not Detected ( 未檢出 ) 3. MDL = Method Detection Limit ( 方法偵測極限值 ) 4. "-" = Not Regulated ( 無規格值 ) 5. ( ) 若鉻含量小於六價鉻之方法偵測極限值, 則六價鉻為 n.d., 不須再測試六價鉻 The result of Cr(VI) is "n.d." as the result of Chromium (Cr) is less than the MDL of Cr(VI), and confirmation test of Cr(VI) is not required. 若鉻含量未小於六價鉻之方法偵測極限值, 需進行六價鉻測試 If the Chromium (Cr) content is not less than the MDL of Cr(VI), confirmation test of Cr(VI) is required.

頁數 (Page) 5 of 8 #FLO W 重金屬流程圖 / Analytical flow chart of Heavy Metal 根據以下的流程圖之條件, 樣品已完全溶解 ( 六價鉻測試方法除外 ) Thesesamples weredissolvedtotalybypre-conditioningmethodaccordingtobelow flow chart.(cr 6+ testmethodexcluded) 測試人員 王志瑋 /TechnicianJR W ang 測試負責人 張啟興 /SupervisorTroyChang 剪裁 製備樣品 /Cutting Preparation 測試樣品重量 /SampleM easurement 鉛 Pb/ 鎘 Cd/ 汞 Hg/ 鉻 Cr 六價鉻 Cr(VI) 用微波消解儀 / 電熱板進行酸消解 A ciddigestionwithmicrowave/hotplate 溶液 /Solution 過濾 /Filtration 殘渣 /Residue 1) 鹼熔融法 /A lkalifusion 2) 鹽酸溶解 /H Cltodissolve 感應耦合電漿原子發射光譜儀 /ICP-A ES ABS / PC / PVC 超音波溶解 / D issolvingby u ltrasonication 在 60 條件下超音波消化 / D igestingat60 by u ltrasonication 非金屬 /N on-metal 其他材質 /Others 在 150~160 下消化 /Digesting at150~160 取水層 / Sep aratingto get aqueous phase 調整 ph /ph adjustment 加入發色劑顯色 /A dddiphenylcarbazide for color develop m ent 以 UV-VIS, 量測樣品溶液在 540 nm 的吸收度 /M easuretheabsorbance at540 nm byuv-vis 金屬 /M etal 沸水萃取 /B oiling w ater extraction 冷卻後過濾樣品 / C ool, filter digestate throu gh filter 加入發色劑顯色 / A dddip henylcarbazide for color develop m ent 以 UV-VIS, 量測樣品溶液在 540 nm 的吸收度 /M easure the absorbance at 540 nm byuv-vis

頁數 (Page) 6 of 8 多溴聯苯 / 多溴聯苯醚分析流程圖 / Analytical flow chart - PBB/PBDE 測試人員 凃雅苓 /TechnicianYalingTu 測試負責人 張啟興 /SupervisorTroyChang 初次測試程序 /Firsttestingprocess 選擇性篩檢程序 /O ptionalscreenprocess 確認程序 /Confirmationprocess Sample/ 樣品 Samplepretreatment/ 樣品前處理 Screenanalysis/ 初篩分析 Sampleextraction 樣品萃取 / Soxhletmethod 索式萃取法 C oncentrate/d ilu te Extractedsolu tion 萃取液濃縮 / 稀釋 Filter / 萃取液過濾 G C/M S / 氣相層析質譜儀

頁數 (Page) 7 of 8 可塑劑分析流程圖 / Analytical flow chart - Phthalate 測試人員 徐毓明 /TechnicianA ndyh su 測試負責人 張啟興 /SupervisorTroyChang 測試方法 /Test method IEC 62321-8 樣品前處理 / 分樣 / Samplepretreatment/separation 樣品以 TH F 四氫呋喃溶解萃取 / Sampledissolved/extractedbyTH F 萃取液稀釋 / D ilu te Extractedsolu tion 氣相層析質譜儀分析 / A nalysiswasperformedbyg C/M S

頁數 (Page) 8 of 8 * 照片中如有箭頭標示, 則表示為實際檢測之樣品 / 部位. * (The tested sample / part is marked by an arrow if it's shown on the photo.) #PIC ** 報告結尾 (End of Report) **