CDX-L460X/L440B

Size: px

Start display at page:

Download "CDX-L460X/L440B"

卜岸储
6 years ago
Views:

1 (1) FM/AM Compact Disc Player Operating Instructions GB CT For installation and connections, see the supplied installation/connections manual. CDX-L460X CDX-L440B 2002 Sony Corporation

2 Welcome! Thank you for purchasing this Sony Compact Disc Player. You can enjoy its various features. 2

3 Table of Contents Location of controls... 4 Precautions... 5 Notes on discs... 5 Getting Started Resetting the unit... 6 Setting the clock... 7 CD Player Playing a disc... 7 Display items... 8 Playing tracks repeatedly Repeat Play... 8 Playing tracks in random order Shuffle Play... 8 Radio Display items... 9 Storing stations automatically Best Tuning Memory (BTM)... 9 Receiving the stored stations Storing only the desired stations Other Functions Adjusting the sound characteristics Quickly attenuating the sound Canceling the beep sound Selecting the sound position My Best sound Position (MBP) Boosting the bass sound D-bass Additional Information Maintenance Removing the unit Specifications Troubleshooting Error displays

4 Location of controls Refer to the pages listed for details. CD : During Playback RADIO : During radio reception SRC MODE SOURCE MBP D-BASS D SEEK AMS SEL OFF ATT SENS 1 DISC REP SHUF BL SKIP ATA MTL BTM DSPL CDX-L460X 1 Volume +/ button 7, 11 2 MODE button RADIO 9, 10 3 SRC (SOURCE) (TUNER/CD) button 7, 9, 10 4 SEL (select) button 7, 11 5 Display window 6 MBP (My Best sound Position) button 11 7 D (D-BASS) button 12 8 Z (eject) button 7 9 Reset button 6 q; ATT (attenuate) button 11 qa SENS button 10 qs Number buttons 11 CD (3) REP 8 (4) SHUF 8 RADIO 9, 10 qd Frequency select switch (located on the bottom of the unit) See Frequency select switch in the Installation/Connections manual. qf BTM (Best Tuning Memory) button 9 qg DSPL (display mode change) button 7, 8, 9 qh OFF button* 7 qj SEEK/AMS +/ button CD 7 RADIO 10 * Warning when installing in a car without an ACC (accessory) position on the ignition key switch Be sure to press (OFF) on the unit for 2 seconds to turn off the clock display after turning off the engine. Otherwise, the clock display does not turn off and this causes battery drain. 4

5 Precautions If your car was parked in direct sunlight, allow the unit to cool off before operating it. Power aerials will extend automatically while the unit is operating. If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer. Moisture condensation On a rainy day or in a very damp area, moisture condensation may occur inside the lenses and display of the unit. Should this occur, the unit will not operate properly. In such a case, remove the disc and wait for about an hour until the moisture has evaporated. To maintain high sound quality Be careful not to splash juice or other soft drinks onto the unit or discs. Notes on discs To keep the disc clean, do not touch the surface. Handle the disc by its edge. Keep your discs in their cases or disc magazines when not in use. Do not subject the discs to heat/high temperature. Avoid leaving them in parked cars or on dashboards/rear trays. Do not attach labels, or use discs with sticky ink/residue. Such discs may stop spinning when used, causing a malfunction, or may ruin the disc. Do not use any discs with labels or stickers attached. The following malfunctions may result from using such discs: Inability to eject a disc (due to a label or sticker peeling off and jamming the eject mechanism). Inability to read audio data correctly (e.g., playback skipping, or no playback) due to heat shrinking of a sticker or label causing a disc to warp. Discs with non-standard shapes (e.g., heart, square, star) cannot be played on this unit. Attempting to do so may damage the unit. Do not use such discs. You cannot play 8 cm CDs. continue to next page t 5

6 Before playing, clean the discs with a commercially available cleaning cloth. Wipe each disc from the centre out. Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog discs. Getting Started Resetting the unit Notes on CD-R/CD-RW discs You can play CD-Rs (recordable CDs)/CD- RWs (rewritable CDs) designed for audio use on this unit. Look for these marks to distinguish CD-Rs/ CD-RWs for audio use. These marks denote that a disc is not for audio use. Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Press the reset button with a pointed object, such as a ballpoint pen. Reset button Note Pressing the reset button will erase the clock setting and some stored contents. Some CD-Rs/CD-RWs (depending on the equipment used for its recording or the condition of the disc) may not play on this unit. You cannot play a CD-R/CD-RW that is not finalized*. * A process necessary for a recorded CD-R/CD-RW disc to be played on the audio CD player. 6

7 Setting the clock The clock uses a 12-hour digital indication. Example: To set the clock to 10:08 1 Press (DSPL) for 2 seconds. The hour indication flashes. CD Player Playing a disc Insert the disc (labelled side up). 1 Press either side of the volume +/ button to set the hour. 2 Press (SEL). The minute indication flashes. 3 Press either side of the volume +/ button to set the minute. 2 Press (DSPL). The clock starts. After the clock setting is completed, the display returns to normal play mode. Playback starts automatically. If a disc is already inserted, press (SRC) repeatedly until CD appears to start playback. To Press Stop playback Z or (OFF) Eject the disc Z Skip tracks (SEEK/AMS) (./>) Automatic [once for each track] Music Sensor Fast-forward/ (SEEK/AMS) (m/m) reverse [hold to desired point] Manual Search Note When the last track on the disc is over, playback restarts from the first track of the disc. 7

8 Display items Music source Track number To Switch display item Displayable items Clock Elapsed playing time Press (DSPL) Playing tracks repeatedly Repeat Play The current track will repeat itself when it reaches the end. During playback, press (3) (REP) until REP indicator appears in the display. Repeat Play starts. To return to normal play mode, press (3) (REP) again. Playing tracks in random order Shuffle Play You can select to play the tracks on the current disc in random order. During playback, press (4) (SHUF) until SHUF indicator appears in the display. Shuffle Play starts. To return to normal play mode, press (4) (SHUF) again. 8

9 Radio The unit can store up to 6 stations per band (FM1, FM2, FM3, AM1, and AM2). Caution When tuning in stations while driving, use Best Tuning Memory to prevent accidents. Display items The following items can be displayed. Band Preset number To Switch display item Displayable items Clock Frequency Press (DSPL) Storing stations automatically Best Tuning Memory (BTM) The unit selects the stations with the strongest signals within the selected band, and stores them in the order of their frequency. 1 Press (SRC) repeatedly to select the radio. 2 Press (MODE) repeatedly to select the band. 3 Press (BTM) for 2 seconds. The unit stores stations in the order of their frequencies on the number buttons. A beep sounds when the setting is stored. Notes If only a few stations can be received due to weak signals, some number buttons will retain their former settings. When a number is indicated in the display, the unit starts storing stations from the one currently displayed. 9

10 Receiving the stored stations 1 Press (SRC) repeatedly to select the radio. 2 Press (MODE) repeatedly to select the band. 3 Press the number button ((1) to (6)) on which the desired station is stored. If preset tuning does not work Automatic tuning/ Local Seek Mode Automatic tuning: Press either side of (SEEK/AMS) to search for the station. Scanning stops when the unit receives a station. Press either side of (SEEK/AMS) repeatedly until the desired station is received. Local Seek Mode: If the automatic tuning stops too frequently, press (SENS) repeatedly until LCL indicator appears. If FM stereo reception is poor Monaural Mode During radio reception, press (SENS) repeatedly until MONO indicator appears. MONO indicator is displayed. The sound improves, but becomes monaural ( ST disappears). To return to normal, press (SENS) again. Storing only the desired stations You can manually preset the desired stations on any chosen number button. 1 Press (SRC) repeatedly to select the radio. 2 Press (MODE) repeatedly to select the band. LCL indicator is displayed. Only the stations with relatively strong signals will be tuned in. Tip If you know the frequency of the station you want to listen to, press either side of (SEEK/AMS) until the desired frequency appears (manual tuning). 3 Press either side of (SEEK/AMS) to tune in the station that you want to store. 4 Press the desired number button ((1) to (6)) until "MEM" appears. The number button indication appears in the display. Note If you try to store another station on the same number button, the previously stored station will be erased. 10

11 Other Functions Adjusting the sound characteristics You can adjust the bass, treble, balance, and fader. The bass and treble levels can be stored independently for each source. 1 Select the item you want to adjust by pressing (SEL) repeatedly. Each time you press (SEL), the item changes as follows: BAS (bass) t TRE (treble) t BAL (left-right) t FAD (front-rear) 2 Adjust the selected item by pressing either side of the volume +/ button. Note Adjust within 3 seconds after selecting the item. Canceling the beep sound Press (6) while pressing (SEL) down. To activate the beep sound again, press these buttons again. Note If you connect an optional power amplifier and do not use the built-in amplifier, the beep sound will be deactivated. Selecting the sound position My Best sound Position (MBP) When you drive without passengers, you can enjoy the most comfortable sound environment with My Best sound Position. My Best sound Position has two presets, which adjust the sound level of balance and fader. You can select one very easily with the MBP button. Display window Balance Level Right Left Fader Level Front Rear MBP-A 4dB 0 0 4dB Quickly attenuating the sound MBP-B MBP-OFF 0 0 4dB dB 0 Press (ATT). ATT appears in the display. To restore the previous volume level, press (ATT) again. Press (MBP) repeatedly for the desired listening position. The mode of My Best sound Position is shown in the display in order of the table. If you want to adjust the sound level of balance and fader more precisely, you can do it using the (SEL) button(see "Adjusting the sound characteristics"). Notes When the BAL (balance) or FAD (fader) in "Adjusting the sound characteristics" is adjusted, the MBP setting returns OFF. When MBP is set to OFF, the BAL and FAD setting is activated. 11

12 Boosting the bass sound D-bass You can enjoy a clear and powerful bass sound. The D-bass function boosts the low frequency signal and high frequency signal with a sharper curve than conventional bass boost. You can hear the bass line more clearly even while the vocal volume remains the same. You can emphasize and adjust the bass sound easily with the (D) (D-BASS) button. Level D.BASS-3 D.BASS-2 D.BASS-1 D.BASS-3 Additional Information Maintenance Fuse replacement When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer. D.BASS-2 D.BASS-1 0dB Frequency (Hz) Adjusting the bass curve Press (D) (D-BASS) repeatedly to select the desired bass curve. As the D-BASS number increases so does the effect. Note The bass sound may distort at same volume. If the bass sound distorts, select less effective bass curve. Fuse (10 A) Warning Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit. 12

13 Removing the unit 1 Insert the supplied tool between the unit and the frame, and rotate 90 to release the hidden mounting spring. Repeat on the opposite side and remove the frame. 2 Insert a flathead screwdriver between the bracket and mounting spring. Gently pry the spring toward the unit while pulling the unit out a little. Repeat on the opposite side and remove the unit. 10 mm 4 mm 90 13

14 Specifications CD player section Signal-to-noise ratio Frequency response Wow and flutter Tuner section FM Tuning range Aerial terminal Intermediate frequency Usable sensitivity Selectivity Signal-to-noise ratio 90 db 10 20,000 Hz Below measurable limit FM tuning interval: 50 khz/200 khz switchable MHz (at 50 khz step) MHz (at 200 khz step) External aerial connector 10.7 MHz 11 dbf 75 db at 400 khz 65 db (stereo), 68 db (mono) Harmonic distortion at 1 khz 0.7 % (stereo), 0.5 % (mono) Separation Frequency response AM Tuning range Aerial terminal Intermediate frequency Sensitivity 30 µv 33 db at 1 khz 30 15,000 Hz AM tuning interval: 9 khz/10 khz switchable 531 1,602 khz (at 9 khz step) 530 1,710 khz (at 10 khz step) External aerial connector 10.7 MHz/450 khz Power amplifier section Outputs Speaker outputs (sure seal connectors) Speaker impedance 4 8 ohms Maximum power output 45 W 4 (at 4 ohms) General Outputs Tone controls Power requirements Dimensions Mounting dimensions Mass Supplied accessories Audio outputs Power aerial relay control lead Bass ±9 db at 100 Hz Treble ±9 db at 10 khz 12 V DC car battery (negative earth) Approx mm (w/h/d) Approx mm (w/h/d) Approx. 1.2 kg Parts for installation and connections (1 set) Note This unit cannot be connected to a digital preamplifier or an equalizer. Design and specifications are subject to change without notice. 14

15 Troubleshooting The following checklist will help you remedy problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. General No sound. Press the volume + button to adjust the volume. Cancel the ATT function. Set the fader control to the centre position for a 2-speaker system. The contents of the memory have been erased. The reset button has been pressed. t Store again into the memory. The power cord or battery has been disconnected. The power connecting cord is not connected properly. No beep sound. The beep sound is cancelled (page 11). An optional power amplifier is connected and you are not using the built-in amplifier. Indications disappear from/do not appear in the display. The clock display disappears if you press (OFF) for 2 seconds. t Press (OFF) again for 2 seconds to display the clock. Stored stations and correct time are erased. The fuse has blown. Makes noise when the ignition key is in the ON, ACC, or OFF position. The leads are not matched correctly with the car s accessory power connector. No power is being supplied to the unit. Check the connection. If everything is in order, check the fuse. The car does not have an ACC position. t Press (SRC) (or insert a disc) to turn on the unit. The power is continuously supplied to the unit. The car does not have an ACC position. The power aerial does not extend. The power aerial does not have a relay box. CD playback A disc cannot be loaded. Another CD is already loaded. The CD is forcibly inserted upside down or in the wrong way. Playback does not begin. Dirty or defective disc. CD-R/CD-RW that is not finalized. You tried to play back a CD-R/CD-RW not designed for audio use. Some CD-Rs/CD-RWs may not play due to its recording equipment or the disc condition. A disc is automatically ejected. The ambient temperature exceeds 50 C. CD will not be ejected. The operation buttons do not function. Press the reset button. The sound skips from vibration. The unit is installed at an angle of more than 60. The unit is not installed in a sturdy part of the car. The sound skips. Dirty or defective disc. Radio reception Preset tuning is not possible. Store the correct frequency in the memory. The broadcast signal is too weak. The stations cannot be received. The sound is hampered by noises. Connect a power aerial control lead (blue) or accessory power supply lead (red) to the power supply lead of a car s aerial booster. (Only when your car has built-in FM/AM aerial in the rear/side glass.) Check the connection of the car aerial. The auto aerial will not go up. t Check the connection of the power aerial control lead. Check the frequency. Automatic tuning is not possible. The local seek mode is set to ON. t Set the local seek mode to OFF (page 10). The broadcast signal is too weak. t Perform manual tuning. continue to next page t 15

16 The ST indication flashes. Tune in the frequency accurately. The broadcast signal is too weak. t Set to the monaural reception mode (page 10). A programme broadcast in stereo is heard in monaural. The unit is in monaural reception mode. t Cancel monaural reception mode (page 10). Error displays Error displays The following indications will flash for a while. E-04 A CD is dirty or inserted upside down. t Clean or insert the CD correctly. E-99 The CD unit cannot be operated because of some problem. t Press the reset button on the unit. If these solutions do not help improve the situation, consult your nearest Sony dealer. 16

17 17

18 2

19 3

20 CD RADIO SRC MODE SOURCE MBP D-BASS D SEEK AMS SEL OFF ATT SENS 1 DISC REP SHUF BL SKIP ATA MTL BTM DSPL CDX-L460X 1 2 RADIO Z 9 0 qa qs CD (3) (4) RADIO qd qf qg qh * qj CD RADIO * (OFF) (OFF) 4

21 t 5

22 6

23 1 (DSPL) 1 2 (SEL) 3 2 (DSPL) (SRC) Z(OFF) Z (SEEK/AMS)./> (SEEK/AMS)m/M 7

24 (3) (3) (DSPL) (4) (4) 8

25 1 (SRC) 2 (MODE) 3 (BTM) (DSPL) 9

26 1 (SRC) (SENS) 2 (MODE) 3 (1) (6) (SEEK/AMS) (SEEK/AMS) (SENS) (SENS) 1 (SRC) 2 (MODE) (SEEK/AMS) 3 (SEEK/AMS) 4 (1) (6) 10

27 1 (SEL) (SEL) tt t 2 (ATT) (ATT) (SEL)(6) 4dB 0 0 4dB 0 4dB 0 4dB (MBP) (SEL) 11

28 (D) 0dB D.BASS-3 D.BASS-2 D.BASS-1 D.BASS-3 D.BASS-2 D.BASS-1 (D) 12

29 13

30 14 µ

31 t (OFF) t (OFF) t(src) t t t t 15

32 t t E-04 t E-99 t 16 Sony Corporation Printed in Korea

XR-CA340

3-236-832-21 (1) FM/AM Cassette Car Stereo Operating Instructions GB CT For installation and connections, see the supplied installation/connections manual. XR-CA340 2002 Sony Corporation Welcome! Thank