XVM-B62

Size: px

Start display at page:

Download "XVM-B62"

姻暴
5 years ago
Views:

1 (1) Mobile Monitor Operating Instructions GB CS XVM-B Sony Corporation

2 Welcome! Thank you for purchasing the Sony Mobile Monitor. PAL or NTSC colour system compatible Wide, Zoom, and Full screen modes available, in addition to the normal screen mode. The low reflection liquid crystal panel reduces the glare from outside lighting sources. Adjustable brightness control, according to lighting conditions Backlight dimmer control produces sharp contrast image, free from reversed or blurred colours. 2 Video inputs are provided for connecting a video player and video game. Precautions To avoid the risk of serious injury or accident, read the following precautions before installing and operating the unit. On safety Comply with your local traffic rules and regulations. While driving, the driver must not watch or operate the monitor. It may lead to distraction and cause an accident. Park the car in a safe place when the driver watch and operate the monitor. Watching video pictures DRIVE MODE When the car starts moving, the video pictures automatically disappear after displaying the following caution. Do not operate equipment connected to the monitor or watch the monitor while driving. The caution above appears only when the monitor is installed on the dashboard. After installing - Take care not to bump your head against the unit when getting up from the back seat. - Do not leave the monitor under direct sunlight for a long period of time. On installation Installing this unit requires technical expertise. This unit should be installed by a qualified technician or service personnel. If you try to install this unit by yourself, do it properly, referring to the installation and wiring diagrams in this operating manual. Improper installation may result in fire or electric shock. Before installation, be sure to turn the ignition switch to the OFF position or take the key out. Installing this unit with the ignition on may cause battery drain or a short circuit. The video pictures appear only after you park the car and set the parking brake. 2

3 Do not damage any pipes, tubes, the fuel tank or electric wiring when installing this unit. This can cause a fire. If you drill a hole in car panels, make sure that any hidden car parts will not be damaged. Do not use any nuts or bolts for safety devices such as steering linkage, fuel supply or braking systems. This can cause a fire or an accident. Take care to prevent cords and wires from getting tangled or crimped in the moving portion of a seat rail. Where to install Before installing this unit, please check your local traffic rules and regulations. Table of contents Welcome!... 2 Precautions... 2 Location of controls... 4 Operation Changing the menu settings... 5 Connections Installation diagram... 6 Connection diagram... 7 Installing the monitor on the dashboard... 8 Installing the monitor on the headrest Attaching and detaching the monitor Additional Information Maintenance Specifications Troubleshooting Do not install this unit where: - It will obstruct the driver s view. - It will obstruct the operation of the airbag system. - It will obstruct the operation of the vehicle, especially the steering wheel, shift lever, or brake pedal. -A driver or passengers may injure themselves when getting into or out of the car. If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer. Warning if your car s ignition has no ACC position After turning the ignition off, be sure to press (POWER) to turn off the unit. Otherwise, the display does not turn off and this causes battery drain. 3

4 Location of controls Monitor INPUT/ button Press to select the desired input source, VIDEO 1 or VIDEO 2. 2 DIMMER/ button Press to select the dimmer On/Off. 3 MENU button 4 POWER button 4

5 Operation Changing the menu settings You can adjust the display settings manually. MENU 1 Press (MENU). The Picture screen appears. Picture 32 Press+/-,or MENU. The setting value of the item selected appears in this area. Each time you press (MENU), the setting screen changes in the following sequence: Picture t Brightness t Color t Hue* t Video Adjust t Mode t Blue Back t Select NTSC or PAL System t Menu Off * Appears only when the NTSC colour system is selected. 2 Press or to adjust to the desired setting. See the following for the setting options. The default settings are underlined. Picture Settable range: 0 to 63 (default setting is 36 ) Adjusting the contrast. Brightness Settable range: 0 to 63 (default setting is 30 ) Adjusting the brightness. Color Settable range: 0 to 63 (default setting is 34 ) Adjusting the colour. Hue Adjust this if the picture is reddish or greenish. The default setting is CTR (center). Hue is displayed for NTSC system only. Video Adjust Resetting the picture, brightness and colour setting at single operation. Note Input channel, colour system for the input video signal (PAL/NTSC), screen mode, and blue background setting will not be reset when you reset the adjustments. Mode Full, Normal, Wide, Zoom Setting the screen mode. Full: An image with an aspect ratio of 4 to 3 enlarged to the left and right edges of the screen (regular image). Normal: An image with an aspect ratio of 4 to 3. Wide: An image with an aspect ratio of 4 to 3, with only the left and right sides of the image being enlarged to fill the screen. Zoom: An image with an aspect ratio of 4 to 3 enlarged to the left and right edges of the screen, with the overflowing parts (top and bottom) cut off to fill the screen. Blue Back On, Off Setting the blue background screen. Select NTSC or PAL System NTSC, PAL Usually it is not necessary to change this setting because this unit automatically determines the colour system depending on the signal type. Select either NTSC or PAL depending on the system of your local area when the picture is distorted. 5

6 Connections Installation diagram Refer to the installation diagram and ask a qualified technician for the installation of the unit. Front Left speaker Tweeter Left Head unit Tweeter Right Mobile Monitor Front Right speaker Rear Left speaker Subwoofer Rear Right speaker Be sure to securely fasten all equipment to the car chassis, etc., to prevent them moving while your car is in motion. Notes All equipment other than one Mobile Monitor is optional. To attach the monitor using the supplied collar, consult the store you purchased this unit or your nearest Sony dealer. 6

7 Connection diagram Refer to the connection diagram for the proper connections. Mobile Monitor XVM-B62 (6.2-inch wide colour LCD Monitor) * Video in cable (3 m) To the parking brake switch cord (see page 8) (To a metal surface of the car chassis when you attach the monitor to the headrest) To a metal surface of the car chassis Black Light green Black To the +12 V power terminal which is energized in the accessory position of the ignition key switch Red Fuse (10 A) L/C filter DVD player, video CD player, etc. * When disconnecting the cable, be sure to hold the connector as illustrated. Pulling the cord forcibly may damage the plug mechanism placed within the connector of the connecting cord of the unit. 7

8 When installing the monitor on the dashboard Be sure to connect the parking cord (Light green) to the parking brake switch cord. The mounting position of the parking brake switch cord depends on your car. Consult your car dealer or your nearest Sony dealer for further details. Foot brake type Installing the monitor on the dashboard You can install the monitor either on the dashboard or behind the headrest. Make sure the installation surface and monitor position are suitable before beginning installation. If you cannot find a suitable mounting location, consult your car dealer or your nearest Sony dealer before installation. Hand brake type Parking brake switch cord Parking brake switch cord Tips on the mounting location Choose the mounting location of the monitor unit carefully. In order to prevent rattling from the vibration of the car, make sure that the back or the bottom of the monitor is touching the mounting surface when mounting the monitor unit. Using the tap Attach the supplied tap to the end of the parking cord (Light green) and the parking brake switch cord. Tap (supplied) x Parking brake switch cord Parking cord (Light green) Note If the parking brake switch cord is too thin, connect the parking cord (Light green) to the parking brake switch cord directly without using the tap. Caution on installation Do not install the unit: in a hot place, subject to direct sunlight, near a heater or in a car with the windows closed (especially in summer) or in an extremely cold place. in a place subject to excessive dust, moisture. in a place which could harm the passenger. in a place which could distract the driver. on a door or the ceiling. 8

9 1 Choose the mounting position, then shape the base of the monitor stand to match the mounting surface. Bend the base gently so there are no gaps between the base and the mounting surface. 3 Fix the stand with the supplied screws. Screws Monitor stand 2 Peel off the protective film from the base of the monitor stand and attach the base to the mounting surface. Make sure the base attaches to the mounting surface completely. Note Before drilling holes in the mounting surface, make sure there is nothing behind the dashboard. 4 Adjust the height. When the monitor is at the right height, tighten the clamp. To keep the monitor from rattling while driving, make sure the back or bottom of the monitor is resting firmly on the mounting surface. Clamp Notes The double-sided tape will not stick firmly if the mounting surface temperature is less than 20 C. Use a hairdryer, etc. to warm up the mounting surface before mounting. Consider carefully the mounting position beforehand. If you change the position soon after mounting the double-sided tape will be weakened. When removing the monitor stand, preheat the mounting surface with a hairdryer then slowly peel up to remove. 5 Adjust the angle. Loosen the lever and adjust the angle. After this adjustment, tighten the lever to fix the angle. Lever 9

10 Installing the monitor on the headrest The monitor can be installed behind the headrest by using the supplied collar. For details, consult the store you purchased this unit or your nearest Sony dealer. Attaching and detaching the monitor Detaching the monitor from the collar Note Be careful not to pull out the cable too much when detaching the monitor from the collar. Insert a plastic card (not supplied) between the collar and the top of the monitor. The catches are released, and you can detach the monitor from the collar. Plastic card (not supplied) collar Attaching the monitor to the collar Set the monitor to the collar securely until you hear click sound. 10

11 Additional Information Maintenance Fuse replacement When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer. Fuse Some stationary green, blue or red dots may appear on the monitor. These are called bright spots, and can happen with any LCD. The LCD panel is highly sophisticated, and more than % of the segments used in the panel are flawless. However, there is a possibility that less than 0.01 % of the segments are defective and may not light up properly. Fuse Warning Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit. About the liquid crystal display (LCD) panel Do not press on the LCD panel on the unit as doing so can distort the picture or cause a malfunction. The picture may become unclear, or the LCD panel may be damaged. Notes on cleaning Clean the LCD panel with a slightly damp soft cloth. Do not use solvents such as benzine, thinner, commercially available cleaners or antistatic spray. Do not use the unit in temperatures under 0 C or over 45 C. If your car was parked in a cold or hot place, the picture may not be clear. The monitor is not damaged. The picture will become clear after the temperature in your car becomes normal. 11

12 Specifications Monitor System Drive system Liquid crystal colour display TFT-LCD active matrix system Picture size 6.2 inches wide screen (16:9) mm (w h) Picture segment 336,960 (w 1440 h 234) dots Power requirements 12 V DC car battery (negative ground) Current drain Dimensions Approx. 550 ma mm (w/h/d) Operating temperature 0 C 45 C Mass Approx. 450 g Supplied accessories Collar (1) Monitor stand (1) (with supplied screws (5)) Power supply cord (1) Video in cable (3 m) (1) Tap (1) Operating Instructions (1) Troubleshooting The following checklist will help you solve problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. General No picture The power cord or battery has been disconnected. The fuse has blown. Picture noise occurs. When a wireless equipment such as a transceiver is used near the monitor, a noise may occur. Keep it away from the monitor. No picture when you connect the optional equipment. The cord has been disconnected. Connect the cord securely. Optional accessories Sony Video CD Players Sony Multi Disc Player MEX-R1 Design and specifications are subject to change without notice. 12

14 DRIVE MODE 2

15 3

17 1 (MENU) MENU Picture 32 Press+/-,or MENU. (MENU) t t t* t t tt t * 2 5

18 6

19 * * 7

20 x 8

22 10

23 11

24 12

28 Sony Corporation Printed in Thailand

XVM-R75

XVM-R75 3-242-078-21(2) Overhead Monitor Operating Instructions GB CT XVM-R75 2002 Sony Corporation 2 Table of Contents Welcome!... 4 Precautions... 5 Location of Controls... 7 Operation Opening the Display Monitor...