KV-BZ212M50

Size: px

Start display at page:

Download "KV-BZ212M50"

活窦
5 years ago
Views:

1 () Trinitron Color TV Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. Panduan Pengendalian Sebelum mengendalikan unit, sila baca buku panduan ini dengan teliti dan simpan untuk rujukan masa depan. GB CT MY KV-BZ 006 Sony Corporation M50

2 WARNING Dangerously high voltages are present inside the TV. TV operating voltage: 0 40 V AC. Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground. To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. If any liquid leaks from the batteries and touches your skin, immediately wash it away with water. For your own safety, do not touch any part of the TV, the power cord and the antenna cable during lightning storms. For children s safety, do not leave children alone with the TV. Do not allow children to climb onto it. To prevent fire or shock hazard, do not expose the TV to rain or moisture. Do not place any objects on the TV. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Do not operate the TV if any liquid or solid object falls into it. Have it checked immediately by qualified personnel only. Install the TV on a stable TV stand and floor which can support the TV set weight. Ensure that the TV stand surface is flat and its area is larger than the bottom area of the TV. Do not block the ventilation openings of the TV. Do not install the TV in a confined space, such as a bookcase or built-in cabinet. Your TV is recommended for home use only. Do not use the TV in any vehicle or where it may be subject to excessive dust, heat, moisture or vibrations. Do not plug in too many appliances to the same power socket. Do not damage the power cord. Do not open the cabinet and the rear cover of the TV as high voltages and other hazards are present inside the TV. Refer servicing and disposal of the TV to qualified personnel. Clean the TV with a dry and soft cloth. Do not use benzine, thinner, or any other chemicals to clean the TV. Do not attach anything (e.g., adhesive tape, cellophane tape, glue) on the painted cabinet of the TV. Do not scratch the picture tube. Pull the power cord out by the plug. Do not pull the power cord itself. Even if your TV is turned off, it is still connected to the AC power source (mains) as long as the power cord is plugged in. Unplug the TV before moving it or if you are not going to use it for several days.

3 Table of Contents Getting Started... 4 Setting up your TV ( Initial Setup )... 5 TV top control, front and rear panels... 7 Connecting optional components... 8 Using the remote control and basic functions... 9 Introducing the WEGA GATE navigator... Settings Adjustment... Changing the Picture setting... 3 Changing the Sound setting... 4 Changing the Channel Setup setting... 5 Changing the Setup setting... 7 Troubleshooting... 8 Specifications... Back cover GB 3

4 x Getting Started Step Insert the batteries (supplied) into the remote. b Note Do not use old or different types of batteries together. Step Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. Tip You can also connect your TV to other optional components (see page 8). Step 3 b Plug in the power cord, then press! on the TV to turn it on. Note The (standby) indicator flashes green for a few seconds when turning on the TV. This does not indicate a malfunction. Step 4 Set up the TV by following the instructions of the Initial Setup menu (see page 5). End 4

5 x Setting up your TV ( Initial Setup ) When you turn on your TV for the first time, the Initial Setup menu will appear. You may change the menu language, preset the TV channels automatically and sort or edit the channels using the buttons on the remote control or TV top control panel. Press V or v to select the desired menu language, then press. The selected menu language appears. End 3 Press V or v to select Yes, then press to preset the channels automatically. The screen will indicate automatic presetting is in progress. After all available channels have been tuned and stored, the Program Sorting/Edit menu appears automatically on the screen. To skip automatic channel presetting, select No, then press. If the message No channel found. Please connect cable/antenna appears, check your TV connections, then press. The Program Sorting/Edit menu enables you to sort and edit the channels. a) If you wish to keep the channels in the current condition, press WEGA GATE to exit. b) Press V or v to select the program number with the channel you wish to change. The selected channel will appear on the screen. c) If you wish to store the channels in a different order: ) Press b to enter sorting mode. ) Press V or v to select the new program number position for your selected channel, then press B. End Auto Start Program auto program now? Program: TV System: VHF Low End Start auto program now? Program Sorting/Edit PROG Label Skip 0 Off 0 Off 03 Off 04 Off Sorting: Edit: Program Sorting/Edit PROG Label Skip 0 0 Off Off 03 0 Off 04 Off Sorting mode Exit Exit 0 Auto continue 5

6 Setting up your TV ( Initial Setup ) (continued) d) If you wish to edit the channels, press to change to edit mode. Press b until the mode that you wish to edit is highlighted: Label, Skip, (block symbol). Then press. ) To label, press V or v to select the alphanumeric characters for the label. Then press. Exit ) To skip the program number, press V or v to select On. Then press. You can skip this program number when using PROG +/-. Exit 3) To block unwanted program number, press V or v to select. Then press. e) Repeat step b) to d) if you wish to change other channels. Exit Press WEGA GATE to go to the next menu. 4 To prevent this Initial Setup menu from appearing again when you turn on the TV by pressing!, press V or v to select No, then press. To allow this menu to appear again, select Yes, then press. Tip You can immediately go to the end of the Initial Setup menu by pressing WEGA GATE. 6

7 L (MONO) R x TV top control, front and rear panels TV top control panel WEGA GATE PROG TV rear panel (MONO) L TV front panel R 0 9 L (MONO) R 4 3 Button/Terminal Function Page! Turn off or turn on the TV. 4 Remote control sensor. - 3 Wake Up indicator. 0 3 Standby indicator. 4 4 t Video input terminal. 8 5 PROG +/ program number / Adjust volume. - 7 t TV or video input. 8 WEGA GATE menu operations 5,6 V,v,B,b and adjust items. 7 selected items. 8 WEGA GATE Display or cancel WEGA GATE menu. 9 8 Antenna input terminal. 8 0 t Video input terminal. 8 7

8 x Connecting optional components Connecting to the video input terminal ( t ) TV front panel Audio/Video cable (not supplied) L R L (MONO) R Camcorder TV rear panel Antenna cable (not supplied) (MONO) L R L R VCR Audio/Video cable (not supplied) DVD player Note If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the program number 0 on the TV (see page 6). 8

9 x Using the remote control and basic functions 0 qa qs qd qf qg qh qj qk ql w; A/B RETURN TV PROG WEGA GATE Button Description Page?/ Turn off temporarily or turn on the TV. a Display the TV program. 3 Jump to last program number that has been watched for at least five seconds. 4 PROG +/ program number. To select quickly, press and hold until the desired program number appears. 5 +/ Adjust volume. 8 Not function for your TV. 9 Not function for your TV. 0 Display on-screen information. qa Mute the sound. qd t TV or video input. 8 qf 0 9 Input numbers. For program numbers 0 and above, enter the second digit within two seconds. ql Not function for your TV. w; picture mode options: 3 Vivid, Standard, Custom *. * When the Custom mode is selected, you can receive the last adjusted picture settings from the Picture Adjustment option in the menu. WEGA GATE menu operations 6 selected items. 7 WEGA Display or cancel WEGA GATE GATE menu. qj V, v, B, b qk RETURN and adjust items. Return to the previous level. continue 9

10 Using the remote control and basic functions (continued) Button Description Page Timer operations qg Set TV to turn on automatically according to the (Wake Up Timer) desired period of time (max. of hours). The indicator on TV lights up amber once you set the wake up timer. If no buttons or controls are pressed for more than one hour after the TV is turned on using the wake up timer, the TV automatically goes into standby mode. qh Set TV to turn off automatically according to the (Sleep Timer) desired period of time (max. of one hour and 30 min.). Teletext operations (green label),,,, Not function for your TV.,,,, (red, green, yellow, blue) PIP operations,, V, v, B, b Not function for your TV. Stereo/bilingual operations qs A/B Not function for your TV. 0

11 x Introducing the WEGA GATE navigator WEGA GATE is a gateway that allows you access to preset TV channels, connected external inputs and Settings menu. WEGA GATE TV External Inputs Settings TV TV watch the preset TV channels (see page 5) End External Inputs External Inputs Video Video select the inputs for the connected equipment (see page 8) End Settings Picture Picture Mode: Vivid Picture Adjustment Color Temperature: Cool Intelligent Picture: On Signal Level Indicator: On change the settings of your TV (see page ) End How to use WEGA GATE WEGA GATE TV External Inputs Settings TV End () Press WEGA GATE to display or cancel the WEGA GATE menu. (3) Press V or v to select the desired item. TV End WEGA GATE TV External Inputs Settings () Press (or b) to confirm your selection or go to the next level. (4) Press RETURN to move to the previous level. Tip The WEGA GATE, operations above. and V,v,B,b buttons on the top control panel can also be used for the

12 x Settings Adjustment You are able to change the settings of your TV from Settings in WEGA GATE menu. Press WEGA GATE button to display WEGA GATE menu. Press V or v to select Settings and press. The following is an overview of the items that can be adjusted. Picture Picture Mode: Vivid Picture Adjustment Color Temperature: Cool Intelligent Picture: On Signal Level Indicator: On End Picture (see page 3) Picture Mode : Vivid Standard Custom Picture Adjustment : Picture, Brightness, Color, Hue, Sharpness, Reset Color Temperature : Cool Neutral Warm Intelligent Picture : On Off Signal Level Indicator : On Off Sound Balance Sound (see page 4) Balance End Channel Setup Auto Program Manual Program Program Sorting/Edit End Channel Setup (see page 5) Auto Program Manual Program Program : TV System : B/G I D/K VHF Low / VHF High / UHF Fine : Auto Manual Signal Booster : Auto Off Program Sorting/Edit Setup Language: Video Label Color System: Factory Settings English Auto End Setup (see page 7) Language : English (Chinese) Video Label : Video Input, Label Color System : Auto PAL SECAM NTSC3.58 NTSC4.43 Factory Settings : Yes No Note When a feature is dimmed in the menu, it is not selectable.

13 x Changing the Picture setting 3 The Picture menu allows you to adjust settings below. Press WEGA GATE and select Settings. Make sure the Picture icon ( ) is selected, then press. Press V or v to select the desired item (e.g., Picture Mode ), then press. Picture Mode Color Temperature Intelligent Picture To choose either Vivid (bright, contrast and sharp), Standard (normal) or Custom *. adjust white color tint. Choose either Cool (blue tint), Neutral (neutral tint) or Warm (red tint). optimize picture quality. Press V or v to select On, then press. To cancel, select Off, then press. Signal Level Indicator display the signal level when the Intelligent Picture is functioning. Intelligent Picture Signal Level indicator will be displayed, followed by picture improvement when you change the program number or the input mode. red amber green (weak) (average) (good) Press V or v to select On, then press. To cancel, select Off, then press. Intelligent Picture is still functioning. * You can adjust the setting to your personal preference in the Picture Adjustment and Color Temperature options only when the Custom mode is selected. Adjusting the Picture Adjustment items under Custom mode 3 Press V or v to select either Picture (contrast), Brightness, Color, Hue (color tones) or Sharpness, then press. ing Reset will set your TV to the factory settings. Press V,v,B or b to adjust the setting of your selected item, then press. Repeat the above steps to adjust other items. The adjusted settings will be received when you select Custom. Notes Hue can be adjusted for the NTSC color system only. Reducing Sharpness can also reduce picture noise. 3

14 x Changing the Sound setting The Sound menu allows you to adjust settings below. Press WEGA GATE and select Settings. Press V or v to select the Sound icon ( ), then press. Balance To Press v or B to emphasize the left speaker. Press V or b to emphasize the right speaker. 4

15 x Changing the Channel Setup setting 3 The Channel Setup menu allows you to adjust settings below. Press WEGA GATE and select Settings. Press V or v to select the Channel Setup icon ( ), then press. Press V or v to select the desired item (e.g., Auto Program ), then press. Auto Program Manual Program Program Sorting/Edit To preset channels automatically. manually preset desired channels and channels that cannot be preset automatically (see Presetting channels manually in page 6). change the order in which the channels appear on the screen, label the program number, skip the program number and block unwanted programs (see step 3 of the section Initial Setup in page 5). Notes If you preset a blocked program number, that program number will be unblocked automatically. If you sort a blocked program, that program will remain blocked. continue 5

16 Changing the Channel Setup setting (continued) Presetting channels manually After selecting Manual Program, select the program number to which you want to preset a channel. () Make sure Program is selected, then press. () Press V or v until the program number you want to preset appears on the menu, then press. 0 End the desired channel. () Make sure either VHF Low, VHF High or UHF is selected, then press. () Press V or v until the desired channel s broadcast appears on the TV screen, then press. If the sound of the desired channel is abnormal, select the appropriate TV system. () Press V or v to select TV System, then press. () Press V or v until the sound becomes normal, then press. If you are not satisfied with the picture and sound quality, you may be able to improve them by using the Fine tuning feature. () Press V or v to select Fine, then press. () Press V or v to select Manual, then press. (3) Press V,v,B or b until the picture and sound quality are optimal, then press. The + or icon on the menu flashes while tuning. If the TV signal is too strong (picture distorted; picture with lines; signal interference) or weak (snowy picture), you may be able to improve the picture quality by setting the Signal Booster feature. () Press V or v to select Signal Booster, then press. () Press V or v to select either Off (for picture distorted; picture with lines; signal interference) or Auto (for snowy picture), then press. 6

17 x Changing the Setup setting 3 The Setup menu allows you to adjust settings below. Press WEGA GATE and select Settings. Press V or v to select the Setup icon ( ), then press. Press V or v to select the desired item (e.g., Language ), then press. To Language change the menu language. Press V or v to select either English or (Chinese), then press. Video Label Color System Factory Settings label the connected equipment. () Video Input and press. Press V or v to select the input you want to label, then press. () Label and press, then press V or v to select the label options: Video / Video, VCR, SAT, Game or Edit *. * You may edit the video label to your favorite name. Press V or v to select alphanumeric characters for the label, then press. select the color system. Press V or v to select either Auto, PAL, SECAM, NTSC3.58 or NTSC4.43, then press. Normally, set this to Auto. reset your TV to factory settings. Press and press V or v to select Yes, then press. To cancel, select No, then press. 7

18 x Troubleshooting If you find any problem while viewing your TV, you can either use the Factory Settings function or check the Troubleshooting guide below. If the problem persists, contact your Sony dealer. Factory Settings function Press the WEGA GATE button. Choose Settings and go to Setup ( ) menu. From Setup menu, select Factory Settings. Then select Yes and press. Your TV will go blank for a few seconds, then the Initial Setup menu will appear. Your TV will be set to factory settings, but certain problems may be solved. Symptom Snowy picture, noisy sound Distorted picture, noisy sound Good picture, noisy sound No picture, no sound Good picture, no sound Dotted lines or stripes Double images or ghosts No color Solutions Check the antenna cable and connection on the TV, VCR and at the wall (see page 8). Check the antenna setup. Contact a Sony dealer for advice. Display the Channel Setup menu and select Manual Program to preset the channel again (see page 6). Display the Channel Setup menu and set the Signal Booster to Auto from Manual Program (see page 6). Try using an external booster. Turn off or disconnect the external booster if it is in use. Display the Channel Setup menu and set the Signal Booster to Off from Manual Program (see page 6). Display the Channel Setup menu and select the appropriate TV System from Manual Program (see page 6). Check the power cord, antenna and VCR connections (see page 8). Press?/ (power) to turn on the TV (see page 9). Press! (main power) on the TV to turn off the TV for about five seconds, then turn it on again (see page 7). Press + to increase the volume level (see page 9). Press to cancel the muting (see page 9). Do not use a hair dryer or other equipment near the TV. Check the antenna setup. Contact a Sony dealer for advice. Use a highly directional antenna. Use the fine tuning ( Fine ) function (see page 6). Check the antenna setup. Contact a Sony dealer for advice. Turn off or disconnect the external booster if it is in use. Display the Picture menu and select Custom from Picture Mode, then adjust the Color level from Picture Adjustment (see page 3). Display the Setup menu and check the Color System setting (usually set this to Auto ) (see page 7). Check the antenna setup. Contact a Sony dealer for advice. 8

19 Symptom Picture slant Abnormal color patches The (standby) indicator on your TV flashes red several times after every three seconds. The TV screen sometimes goes blank for slightly longer than usual during channel change. TV cabinet creaks. A small boom sound is heard when the TV is turned on. Solutions Keep external speakers or other electrical equipment away from the TV. Keep external speakers or other equipment away from the TV. Do not move the TV while the TV is turned on. Press! (main power) on the TV to turn off the TV for about 5 minutes, then turn it on again to demagnetize the TV. Count the number of times the (standby) indicator flashes. Press! (main power) to turn off your TV. Contact your nearest Sony service center. The Signal Booster is functioning to detect a weak signal. This does not indicate a malfunction. Changes in room temperature sometimes make the TV cabinet expand or contract, causing a noise. This does not indicate a malfunction. The TV s demagnetizing function is working. This does not indicate a malfunction. 9

20 0-40

21 WEGA GATE CT 3

22 x b b 8 8 3! 4 Initial Setup 5 End 4

23 x Initial Setup V v V v 0 3 a) WEGA GATE b) V v c) ) b ) V v B PROG PROG

24 d) b ) V v ) V v PROG +/ 3) V v e) b) d) PROG PROG PROG 4 WEGA GATE! V v WEGA GATE 6

25 L (MONO) R x WEGA GATE PROG (MONO) L R 0 9 L (MONO) R 4 3! t 8 5 PROG +/ 6 +/ 7 t 8 WEGA GATE 5, 6 V,v,B,b 7 8 WEGA GATE WEGA GATE t 8 7

26 x t L R L (MONO) R (MONO) L R L R DVD

27 x 0 qa qs qd qf qg qh qj qk ql w; A/B RETURN TV PROG WEGA GATE ? a 3 4 PROG +/ 5 +/ qa qd t 8 qf ql w; 3 * * WEGA GATE 6 7 WEGA WEGA GATE GATE qj V, v, B, b qk RETURN 9

28 qg qh 30,,,,,,,,,, V, v, B, b qs A/B 0

29 x WEGA GATE WEGA GATE WEGA GATE WEGA GATE WEGA GATE 电视选择结束确认 () WEGA GATE WEGA GATE (3) V v WEGA GATE () b (4) RETURN WEGA GATE V,v,B,b

30 x WEGA GATE WEGA GATE WEGA GATE V v B/G I D/K VHF / VHF / UHF Language: 7 Language English PAL SECAM NTSC3.58 NTSC4.43

31 x 3 WEGA GATE V v * V v V v * V v V v B b 3 NTSC 3

32 x WEGA GATE V v v B V b 4

33 x 3 WEGA GATE V v V v

34 V v VHF 0 VHF VHF UHF V v 3 V v V v 4 V v V v 3 V v B b + 5 V v V v 6

35 x 3 WEGA GATE V v V v /Language Language V v English V v V v * * V v V v PAL SECAM NTSC 3.58 NTSC 4.43 V v 7

36 x Sony WEGA GATE ( Settings ) ( Setup ) 8 Sony ?/ 9! Sony 6 Sony 3 7 Sony 8

37 ! 5! Sony 9

38 x Specifications Power requirements Power consumption (W) Television system Color system Channel coverage B/G I D/K 8 (Antenna) Audio output (Speaker) Number of terminal (Video) 0-40 V AC, 50/60 Hz Indicated on the rear of the TV B/G, I, D/K PAL, PAL 60, SECAM, NTSC3.58 (AV IN), NTSC4.43 VHF : E to E /UHF : E to E69 / CATV : S0 to S03, S to S4 UHF : B to B68 /CATV : S0 to S03, S to S4 VHF : C to C, R to R / UHF : C3 to C57, R to R60 / CATV : S0 to S03, S to S4, Z to Z39 75-ohm external terminal 3 W + 3 W Input: 3 KV-BZM50 Design and specifications are subject to change without notice. Phono jacks; Vp-p, 75 ohms (Audio) Input: Phono jacks; 500 mvrms Picture tube in. Tube size (cm) 54 Measured diagonally Screen size (cm) 5 Measured diagonally Dimensions (w/h/d, mm) Mass (kg) Note 0

KV-AZ212M61

KV-AZ212M61 -685-750- () Trinitron Color TV Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. Panduan Pengendalian Sebelum mengendalikan unit,