CMT-VP100

Transcription

1 (1) Micro Hi-Fi Component System Operating Instructions GB CS CMT-VP Sony Corporation

2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. And don t place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Don t throw a battery, dispose it as the injurious wastes. Shanghai Suoguang Electronice Co., Ltd. 930 Jian Chuan Road Min Hang Shanghai This system can play the following discs Disc logo Contents Disc size Play time VIDEO CDs Audio + Video (moving pictures) 12 cm/8 cm 74 min./20 min. Audio CDs Audio 12 cm/8 cm 74 min./20 min. Note on VIDEO CDs This system conforms to VIDEO CDs without PBC functions (Ver. 1.1) and VIDEO CDs with PBC functions (Ver. 2.0) of VIDEO CD standards. You can enjoy two kinds of playback according to the disc type. Disc type You can VIDEO CDs without Enjoy video playback PBC functions (moving pictures) as well as (Ver. 1.1 discs) audio CDs. VIDEO CDs with Play interactive software PBC functions using menu screens displayed (Ver. 2.0 discs) on the TV screen (menu playback), in addition to the video playback function of VIDEO CDs without PBC functions. Moreover, you can play high or standard quality still picture. * PBC = Play Back Control 2 GB

3 Table of Contents Parts Identification Main unit... 4 Remote Control... 5 Getting Started Hooking up the system... 6 Inseting two size-aa (R6) batteries into the remote control... 7 Setting the time... 8 VIDEO CD/CD Loading the disc... 9 Playing the VIDEO CD Normal Play/Shuffle Play/ Repeat Play... 9 Playing a VIDEO CD with PBC functions (Ver. 2.0) PBC Play Playing the CD Normal Play/Shuffle Play/ Repeat Play Programming the CD/VIDEO CD tracks Program Play Using the VIDEO CD/CD display Using the on-screen display Resuming VIDEO CD playback from the point last stopped at Resume Play Tape Loading a tape Playing a tape Recording to a tape CD Synchro Recording/ Recording Manually/Program Edit Timer-recording radio programs Sound Adjustment Adjusting the sound Other Features Singing along: Karaoke Falling asleep to music Sleep Timer Waking up to music Daily Timer Optional Components Hooking up the optional components Additional Information Precautions Troubleshooting Specifications Glossary GB Tuner Presetting radio stations Listening to the radio Preset Tuning GB

4 Parts Identification The items are arranged in alphabetical order. Refer to the pages indicated in parentheses () for details. Main unit Z wj?/1 A Y x m M z X Z u x. > m M 9 q; qa qs qd qf qg qh qj qk ql wh wg wf wd ws wa w; BASS 3 (20) CD EJECT Z qj (9~11) CD SYNC qs (17, 18) CD u ws (9~13, 28) CD x qk (9~13, 26) CD./> ql (10~12) CD m/m ql (10, 11) DSG 5 (20, 23) FUNCTION wj (9, 11, 12, 14, 16, 17, 23) MIC IN jack wg (20) MIC VOL wf (20) PBC indicator wd (10, 28) PHONES jack wh PLAY MODE wa (9, 11, 12, 18) Remote sensor 2 REPEAT w; (10, 11) TAPE EJECT Z 8 (16) TAPE REC z 6 (17) TAPE Y 7 (16~18) TAPE X qa (16~18) TAPE x 9 (16~18, 26) TAPE m/m 0 (16) TREBLE 4 (20) TUNER BAND qd (14, 26) TUNING MODE qg (14, 15) TUNING +/ qf (14, 15) VOLUME qh (21) BUTTON (power) 1 (7, 14, 18, 21, 23) 4 GB

5 Parts Identification Remote Control wl wk wj wh wg wf wd ws wa w; ql qk qj `/1 y O X # q; qa qs qd qf qg qh CD ql (9, 11) CLOCK/TIMER SELECT 4 (19, 22) CLOCK/TIMER SET 5 (8, 18, 21) DIR MODE wh (16~18) DISPLAY wj (12) ENTER 8 (8, 14, 18, 21) FUNCTION qj (9, 11, 12, 14, 16, 17, 23) KEY CONTROL #/2 qh (20) K.PON/MPX 9 (20) MEMORY wk (14) NEXT qa (10) Numeric buttons wg (10, 11) ON SCREEN 7 (13) PREV ws (10) RETURN O qs (10) SLEEP wl (21) SLOW y wd (9) STEREO/MONO 6 (15) TAPE qk (16) TUNER BAND qf (14) TV/VIDEO 1 (7) 2 (7) VOLUME +/ qg (21) BUTTON DESCRIPTIONS N wa (9~13, 16~18, 28) X w; (9, 11, 16~18) x qd (9~13, 16~18). ws (10~12) > qa (10~12) m wf (10, 11, 14~16) M q; (10, 11, (power) 3 (7, 14, 18, 21) + qa (8, 14, 18, 21) ws (8, 14, 18, 21) 5 GB

6 Getting Started Hooking up the system Follow steps 1 through 5 of the procedure below to hook up your system using the supplied cords and accessories. AM loop antenna FM antenna Right speaker 2 Left speaker Connect the speakers. Connect the right and left speaker cords to the SPEAKER terminals as shown below. 2 Connect the FM and AM antennas. Set the AM loop antenna up before connecting it. 3 R # 3 L # Red (3) Black (#) ANTENNA Extend the FM wire antenna horizontally AM loop antenna Insert this portion FM75Ω AM U 6 GB

7 Getting Started 3 Connect the VIDEO OUT jack to the video input jack on your TV with the supplied video connecting cord. Inseting two size-aa (R6) batteries into the remote control VIDEO OUT When using a TV Turn on your TV and set the input selector to video input so you can view the pictures from the system. E e e E 4 Set SYSTEM SELECT (color system) to PAL or NTSC depending on the color system of your TV. The color system of your TV AUTO (if your TV automatically changes the color system according to the input signal) NTSC PAL (the factory setting) SYSTEM SELECT NTSC PAL AUTO Set SYSTEM SELECT to AUTO. NTSC. PAL. Tip When the remote no longer operates the system, replace both batteries with new ones. Note If you do not use the remote for a long period of time, remove the batteries to prevent possible damage from battery leakage and corrosion. Using the remote You can operate a Sony TV set. To Press Turn the TV on or off Switch the TV s video TV/VIDEO. input 5 Connect the power cord to a wall outlet. If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor). To turn on the system, 7 GB

8 Setting the time 1 Turn on the system. 2 Press CLOCK/TIMER SET on the remote. If you are setting the clock for the first time, go to step 5. 3 Press +/ on the remote repeatedly until SET CLOCK appears in the display. 4 Press ENTER on the remote. The hour indication flashes. 5 Press +/ on the remote repeatedly to set the hour. 6 Press ENTER on the remote. The minute indication flashes. 7 Press +/ on the remote repeatedly to set the minute. 8 Press ENTER on the remote. The clock will begin operating. To reset the system clock Start over from step 1. 8 GB

9 VIDEO CD/CD VIDEO CD/CD Loading the disc 1 Press CD EJECT Z. The disc tray slides out. 2 Load a disc onto the disc tray. Load with the label side up. When you play a CD/VIDEO CD single (8 cm CD/VIDEO CD), load it onto the inner circle of the tray. Z u x. > m M 3 Press CD EJECT Z again to close the disc tray. Notes The disc cannot be viewed through the front window when a CD/VIDEO CD single (8 cm CD/ VIDEO CD) is loaded. The characters printed on the disc appear upside down when viewed through the front window. Playing the VIDEO CD Normal Play/Shuffle Play/Repeat Play You can play both VIDEO CDs without PBC functions (Ver. 1.1) and VIDEO CDs with PBC functions (Ver. 2.0). You can enjoy two kinds of playback according to the disc type. The PBC functions of VIDEO CD (Ver. 2.0) are disabled during Shuffle and Repeat Play Turn on your TV and select the video input. 2 Turn FUNCTION (or press FUNCTION on the remote repeatedly) until CD appears in the display. The indicator surrounding the CD u and CD x buttons lights up. You can switch the function to CD by pressing the CD button on the remote. 3 Press PLAY MODE repeatedly until the mode you want appears in the display. Select No display SHUFFLE PGM 4 Press CD u (or N on the remote). Other Operations To Stop playback Pause Slow playback To play The VIDEO CD in original order. The tracks on the VIDEO CD in random order. The tracks on the VIDEO CD in any order that you want (see Programming the CD/VIDEO CD tracks on page 11). Do this Press CD x. Press CD u (or X on the remote). *1 Press again to resume playback. Press SLOW y on the remote repeatedly. The playback speed changes as follows: 1 / 2 t 1 / 4 t 1 / 8 t 1 / 2 t... continued Track number Playing time 9 GB

10 Playing the VIDEO CD (continued) To Select a track or scene *2 Find a point in a track or scene (Lock Search Function) Remove the VIDEO CD Play repeatedly (Repeat Play) Do this Press CD./> repeatedly until you find the desired track or scene. During playback, press and hold down CD m/m until the system starts searching. 1Press once to start searching. 2Press again to increase the search speed. Each time you press the button, the search speed changes as follows: 1 (slow) t 2 (normal) t 3 (high) t 1 (slow) t... 3Press CD u (or N on the remote) to stop searching at the desired point. Press CD EJECT Z. Press REPEAT repeatedly during playback until REPEAT or REPEAT 1 appears in the display. REPEAT: For all the tracks on the VIDEO CD. REPEAT 1: For only the currently playing track. To cancel playing repeatedly, press REPEAT repeatedly until REPEAT and REPEAT 1 disappear from the display. * 1 The video image may be somewhat unstable. * 2 Except during PBC playback of a VIDEO CD with PBC functions (Ver. 2.0). See this page for details on PBC playback. Playing a VIDEO CD with PBC functions (Ver. 2.0) PBC Play You can use menus on your TV screen to enjoy the disc s interactive software. The menu format and structure will differ with each disc. 1 Start playing a VIDEO CD with PBC functions (Ver. 2.0). The PBC indicator lights up and a PBC menu appears on your TV. The indicator lights up during PBC playback of a VIDEO CD with PBC functions (Ver. 2.0). When the PBC functions are not used (see below), the indicator goes off. 2 Press the numeric button(s) on the remote to select the number that you want from the menu. 3 Follow the menu instructions to enjoy interactive playback. To Stop playback Go to the next scene or track Go back to the preceding scene or track Go back to a previous menu Cancel PBC Playback of a VIDEO CD with PBC functions (Ver. 2.0) Do this Press CD x. Press NEXT on the remote. Press PREV on the remote. Press RETURN O on the remote. Before you start playing, select the track you want using CD./>, then press CD u (or N on the remote). Before you start playing, select the track number using the numeric buttons on the remote. The PBC indicator goes off and playback begins from the selected track. Still images, such as the menu screens, will not be shown. 10 GB

11 VIDEO CD/CD Tip When appears on the TV screen, you have pressed an invalid button. To enter numbers over 10 (on the remote only) 1 Press >10. 2 Enter the corresponding digits. To enter 0, press 10/0 instead. Example: To enter number 30, press >10, then press 3 and 10/0. Playing the CD Normal Play/Shuffle Play/Repeat Play This system lets you play CDs in different play modes Turn FUNCTION (or press FUNCTION on the remote repeatedly) until CD appears in the display. The indicator surrounding the CD u and CD x buttons lights up. You can switch the function to CD by pressing the CD button on the remote. 2 Press PLAY MODE repeatedly until the mode you want appears in the display. Select No display SHUFFLE PGM Track number To play Playing time The CD in original order. The tracks on the CD in random order. The tracks on the CD in any order that you want (see Programming the CD/VIDEO CD tracks on this page). 3 Press CD u (or N on the remote). Other Operations To Stop playback Pause Select a track Find a point in a track (Lock Search Function) Remove the CD Play repeatedly (Repeat Play) Programming the CD/ VIDEO CD tracks Program Play Do this Press CD x. Press CD u (or X on the remote). Press again to resume playback. During playback or pause, press CD./> repeatedly until you find the desired track. During playback, press and hold down CD m/m until the system starts searching. Press CD u (or N on the remote) to stop searching at the desired point. Press CD EJECT Z. Press REPEAT repeatedly during playback until REPEAT or REPEAT 1 appears in the display. REPEAT: For all the tracks on the CD. REPEAT 1: For only the currently playing track. To cancel playing repeatedly, press REPEAT repeatedly until REPEAT and REPEAT 1 disappear from the display. You can make a program of up to 20 tracks on a CD/VIDEO CD in any order that you want. The PBC functions of VIDEO CD (Ver. 2.0) are disabled during Program play. continued 11 GB

12 Programming the CD/VIDEO CD tracks (continued) 1 Turn FUNCTION (or press FUNCTION on the remote repeatedly) until CD appears in the display. 2 Press PLAY MODE repeatedly until PGM appears in the display. 3 Press CD./> repeatedly until the desired track number appears in the display PGM Selected track number Total playing time 4 Press PLAY MODE. The selected track is programmed. The selection number appears in the display. 5 To program additional tracks, repeat steps 3 and 4. 6 Press CD u (or N on the remote). Using the VIDEO CD/CD display Press DISPLAY on the remote repeatedly. The display changes as follows: During normal playback Current track number and elapsed playing time of the track t Current track number and remaining playing time of the track t Remaining playing time of the entire CD/ VIDEO CD t Clock display t Current track number and elapsed playing time of the track t... (VIDEO CD with PBC functions (Ver. 2.0)) Elapsed playing time of the current track* y Clock display * This may not appear when displaying still images, etc. While the VIDEO CD/CD is stopped Total number of tracks and total playing time t Clock display t Current source display t Total number of tracks and total playing time t... To Cancel Program Play Add a track to the end of the program Erase the entire program Do this Press PLAY MODE repeatedly until PGM disappears from the display. Do steps 3 and 4 with Program Play stopped. Press CD x with Program Play stopped. Note If the CD/VIDEO CD contains 21 tracks or more, the remaining playing time of the current track will appears as for each track starting with the 21st. Tips The program you made remains after Program Play finishes. To play the program again, switch the function to CD, and then press CD u (or N on the remote) appears in the display when the total program time exceeds 100 minutes. 12 GB

13 VIDEO CD/CD Using the on-screen display You can check the current operating status and disc information for VIDEO CDs and audio CDs while the VIDEO CD/CD is playing or stopped. Press ON SCREEN on the remote. The on-screen display changes as follows: ON SCREEN ON y ON SCREEN OFF ON SCREEN ON display When 9 29:48 VCD STOP CONTINUE RESUME PBC OFF REPEAT K.PON K.CON #5 The VIDEO CD/CD is stopped The VIDEO CD/CD is playing The display shows Total number of tracks and total playing time of disc Current track number and elapsed playing time of the track 2 Play mode* * In Program Play, the selection number and programmed track number appears below. 3 PBC ON *, PBC OFF or no display * PBC ON is displayed for a VIDEO CD with PBC functions. 4 REPEAT, REPEAT 1 or no display 5 Karaoke effect status 6 When The display shows The VIDEO CD/CD is STOP stopped The VIDEO CD/CD is PLAY playing 7 RESUME or no display 8 Music calender* or no display * Track numbers disappear from the music calendar after they are played. When the PBC functions are not used, the music calender appears only while the VIDEO CD is stopped. 9 Key control (2 8 ~ 0 ~ # 8) or no display Tip Depending on the condition, some items are displayed, while others are not. Resuming VIDEO CD playback from the point last stopped at Resume Play This function cannot be used with an audio CD. 1 While playing a VIDEO CD, press CD x to stop playback. RESUME appears on your TV screen. If RESUME does not appear, Resume Play is not available. 2 Press CD u (or N on the remote). To view from the beginning of the VIDEO CD When RESUME appears in the display, press CD x, then press CD u (or N on the remote). Notes Resume Play is not available in Shuffle or Program Play, or during PBC playback of a VIDEO CD with PBC functions (Ver. 2.0). Depending on where you stopped the VIDEO CD, the system may resume playback from a different point. Resume Play is cancelled when: you press a numeric button on the remote, PLAY MODE, or CD x. you remove the VIDEO CD. you disconnect the power cord. you turn off the system. 13 GB

14 Tuner Presetting radio stations The system can store a total of 30 preset stations (20 for FM and 10 for AM). 1 Turn FUNCTION (or press FUNCTION on the remote repeatedly) until TUNER appears in the display. The indicator surrounding the TUNER BAND button lights up. 2 Press TUNER BAND to select FM or AM. 3 Press TUNING MODE repeatedly until AUTO appears in the display. 4 Press TUNING +/ (or m/m on the remote). The frequency changes as the system scans for a station. Scanning stops automatically when a station is tuned in. At that time, TUNED and STEREO (for stereo program only) appear. 5 Press MEMORY on the remote. A preset number flashes. PRESET 1FM1005STEREO TUNED MHz To change the preset number Start over from step 2. Tip The preset stations are saved in the system s memory for about a day even if you disconnect the power cord or a power failure occurs. Listening to the radio Preset Tuning Presetting radio stations in the system s memory in advance make it easy to tune in those stations later (see Presetting radio stations on this page). 1 Turn FUNCTION (or press FUNCTION on the remote repeatedly) until TUNER appears in the display. 2 Press TUNER BAND to select FM or AM. 3 Press TUNING MODE repeatedly until PRESET appears in the display. 4 Press TUNING +/ (or m/m on the remote) repeatedly to display the preset number of the desired station. To turn off the radio Press?/1. Preset number Frequency 6 Press +/ on the remote repeatedly to select the preset number that you want. 7 Press ENTER on the remote. The station is stored to the selected preset number. 8 Repeat steps 2 through 7 to preset other stations. To tune in a weak station In step 3, press TUNING MODE repeatedly until AUTO and PRESET disappear from the display, then press TUNING +/ (or m/m on the remote) repeatedly to tune in the station. 14 GB

15 Tuner To tune in a non-preset radio station In step 3, press TUNING MODE repeatedly until AUTO and PRESET disappear from the display, then press TUNING +/ (or m/m on the remote) repeatedly to tune in the desired station (Manual Tuning). Tips If there is static during an FM broadcast, press STEREO/MONO on the remote until MONO appears in the display. After MONO scrolls across the display, the frequency will appear. The broadcast will no longer be in stereo, but the reception will improve. To improve the reception, adjust the supplied antennas or connect an external antenna. 15 GB

16 Tape Loading a tape 1 Press TAPE EJECT Z. 2 Load a recorded/recordable tape into the cassette holder. With the side you want to play/ record on facing towards you Other Operations To Stop playback Pause Fast-forward or rewind Remove the tape Do this Press TAPE x. Press TAPE X. Press again to resume playback. With the tape stopped, press TAPE m/m. Press TAPE EJECT Z. Z Y x m M z X?/1 Playing a tape You can use Type I (normal) tape. 1 Load a recorded tape into the cassette holder. 2 Turn FUNCTION (or press FUNCTION on the remote repeatedly) until TAPE appears in the display. The indicator surrounding the TAPE Y and TAPE x buttons lights up. You can switch the function to TAPE by pressing the TAPE button on the remote. 3 Press DIR MODE on the remote repeatedly to select to play one side of the tape, to play both sides, or * to play both sides repeatedly. * The tape automatically stops after playing back five times. 4 Press TAPE Y (or N on the remote). Press TAPE Y (or N on the remote) again to play the reverse side. The tape starts playing back. 16 GB

17 Tape Recording to a tape CD Synchro Recording/Recording Manually/Program Edit You can record from a CD/VIDEO CD, radio or any of the connected components. You can use Type I (normal) tape. Steps Recording from a CD/VIDEO CD (CD Synchro Recording) Load a recordable tape into the cassette holder. Load a disc onto the disc tray. Turn FUNCTION (or press FUNCTION on the remote repeatedly) until CD appears in the display. Recording manually Turn FUNCTION (or press FUNCTION on the remote repeatedly) to select the source you want to record from. Load a disc or tune in the desired station. Press CD SYNC. Press TAPE REC z. The tape stands by for recording. and B (or b ) appear. To start recording on the side facing away from you, press TAPE Y until changes to. Press DIR MODE on the remote repeatedly to select the tape, or or to record on both sides. Press TAPE X. to record on one side of Press TAPE X, and then start playing the desired source. To stop recording Press TAPE x. Tip For recording manually: To pause recording, press TAPE X. continued 17 GB

18 Recording to a tape (continued) Recording CD/VIDEO CD tracks in your favorite order Program Edit The PBC functions of VIDEO CD (Ver. 2.0) are disabled during Program Edit. 1 Load a recordable tape into the cassette holder. 2 Load a disc onto the disc tray. 3 Do steps 1 through 5 in Program Play (see page 11). 4 Press CD SYNC. The tape stands by for recording and the VIDEO CD/CD stands by for playback. and B (or b ) appear, and the CD SYNC indicator lights up. To start recording on the side facing away from you, press TAPE Y (or N on the remote) until changes to. 5 Press DIR MODE on the remote repeatedly to select to record on one side of the tape, or or to record on both sides. 6 Press TAPE X. To Stop recording Cancel Program Edit Do this Press TAPE x. Press PLAY MODE repeatedly until PGM disappears from the display. Timer-recording radio programs To timer-record, make sure that you have set the system clock correctly (see Setting the time on page 8) and preset the radio station (see Presetting radio stations on page 14). 1 Tune in the desired preset radio station (see Listening to the radio on page 14). 2 Load a recordable tape. 3 Press CLOCK/TIMER SET on the remote. 4 Press +/ on the remote repeatedly until SET REC appears in the display. SET REC scrolls and c REC appears in the display. 5 Press ENTER on the remote. ON TIME appears, then the hour indication flashes. 6 Set the starting time. Press +/ on the remote repeatedly to set the hour, then press ENTER on the remote. The minute indication begins flashing next. Press +/ on the remote repeatedly to set the minute, then press ENTER on the remote. OFF TIME appears, then the hour indication flashes again. 7 Set the stopping time by repeating step 6. The start time, the stopping time, TUNER, and the preset station appear in turn, then the original display returns. 8 to turn off the system. When the recording starts, the volume level is automatically set to the minimum. 18 GB

19 Tape To Check the settings Turn off the timer Do this Press CLOCK/TIMER SELECT on the remote repeatedly until c REC appears in the display. The preset items appear in turn. Press CLOCK/TIMER SELECT on the remote repeatedly until c REC disappears from the display. Tip Once you set the timer, the time settings will remain in the system s memory until you change them, even when you turn the system or the timer off. The settings that were last used will be in effect when you turn the timer on again. Notes The system will turn on 15 seconds before the specified starting time. If the system is turned on at the specified starting time, recording will not occur. When you have set the Sleep Timer, the timer recording will not operate until the Sleep Timer Function is turned off. 19 GB

20 Sound Adjustment Adjusting the sound Generating a more dynamic sound (Dynamic Sound Generator) Press DSG. To cancel the DSG, press DSG again. Adjusting the bass Turn BASS. You can adjust the bass in 7 steps. Adjusting the treble Turn TREBLE. You can adjust the treble in 7 steps. Other Features Singing along: Karaoke Do the procedure below to suppress the singer s voice on any stereo CD/VIDEO CD in order to sing along. 1 Turn MIC VOL to 0 to turn down the microphone volume level. 2 Connect an optional microphone to MIC IN. 3 Press K.PON/MPX on the remote repeatedly to obtain the karaoke effect you want. The display changes as follows: K_PON t MPX R t MPX L t STEREO t K_PON t... To use the Karaoke Function, choose K_PON (KARAOKE PON); choose MPX R or MPX L for multiplexed CDs/VIDEO CDs. 4 Start playing the music. 5 Adjust the microphone volume by turning MIC VOL. To Cancel the Karaoke Function Adjust the key Do this Turn MIC VOL to 0 and disconnect the microphone from MIC IN, then press K.PON/MPX on the remote repeatedly until STEREO appears. Press KEY CONTROL #/2 on the remote repeatedly. You can adjust the key in 17 steps. Note With some songs, the volume of vocals may not be suppressed when you select K_PON. 20 GB

21 Sound Other Features Adjustment/Other Features Falling asleep to music Sleep Timer The Sleep Timer Function lets you specify a sleep time, after which the system stops playing and turns off automatically. You can thus fall asleep to music. Press SLEEP on the remote repeatedly. The sleep time changes as follows: AUTO* t 90MIN t 80MIN t 70MIN t t 10MIN t OFF t AUTO* t * The system turns off after the current CD/VIDEO CD or tape finishes playing (up to 100 minutes). The system also turns off when you manually stop the VIDEO CD/CD or tape. To Check the remaining sleep time Change the sleep time Cancel the Sleep Timer Function Waking up to music Daily Timer Press SLEEP on the remote once. SLEEP on the remote repeatedly until the time you want appears. SLEEP on the remote repeatedly until OFF appears. By setting the Daily Timer, you can make the system automatically turn on and off at specified times. To use this function, make sure that you have set the system clock correctly (see Setting the time on page 8). 1 Prepare the music source you want to listen to when the system turns on. CD/VIDEO CD: Load a disc. Tape: Load a tape with the side you want to play facing towards you. Radio: Tune in the preset radio station that you want (see Listening to the radio on page 14). 2 Adjust the volume. 3 Press CLOCK/TIMER SET on the remote. 4 Press +/ on the remote repeatedly until SET DAILY appears in the display. SET DAILY scrolls and c DAILY appears in the display. 5 Press ENTER on the remote. ON TIME appears, then the hour indication flashes. 6 Set the starting time. Press +/ on the remote repeatedly to set the hour, then press ENTER on the remote. The minute indication begins flashing next. Press +/ on the remote repeatedly to set the minute, then press ENTER on the remote. OFF TIME appears, then the hour indication flashes again. 7 Set the stopping time by repeating step 6. 8 Press +/ on the remote repeatedly until the music source you want appears. The display changes as follows: t TUNER y CD T t TAPE T 9 Press ENTER on the remote. The starting time, the stopping time, and the music source appear in turn, then the original display returns. to turn off the system. continued 21 GB

22 Waking up to music (continued) To Check the settings Turn off the timer Do this Press CLOCK/TIMER SELECT on the remote repeatedly until c DAILY appears in the display. The preset items appear in turn. Press CLOCK/TIMER SELECT on the remote repeatedly until c DAILY disappears from the display. Tip Once you set the timer, the time settings will remain in the system s memory until you change them, even when you turn the system or the timer off. The settings that were last used will be in effect when you turn the timer on again. Notes The system will turn on 15 seconds before the specified starting time. When you have set the Sleep Timer, the Daily Timer will not operate until the Sleep Timer Function is turned off. 22 GB

23 Optional Components Optional Components Hooking up the optional components You can connect a variety of components to your system in order to enhance it. Make sure that the color of the plugs matches that of the connectors. To the audio output jacks on your MD deck/vcr Note You cannot make a digital recording from a VIDEO CD to an MD deck through the optical cable. Tip If you cannot select VIDEO by turning FUNCTION (or press FUNCTION on the remote repeatedly), while pressing down DSG in standby mode. The function will change from MD to VIDEO, and VIDEO will appear in the display. To change back to MD, repeat this procedure. To the digital input connector on your MD deck* * If the jack is covered with a cap, remove it before use. To Make a digital recording from CD to MD Listen to the connected MD deck Listen to the connected VCR Do This Connect the optical cable. Turn FUNCTION (or press FUNCTION on the remote repeatedly) until MD appears in the display. Turn FUNCTION (or press FUNCTION on the remote repeatedly) until VIDEO appears in the display. 23 GB

24 Additional Information Precautions On operating voltage Before operating the system, check that the operating voltage of your system is identical with the voltage of your local power supply. On safety The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. Unplug the system from the wall outlet (mains) if it will not be used for an extended period of time. To disconnect the power cord (mains lead), pull it out by the plug. Never pull the cord itself. Should any solid object or liquid fall into the system, unplug the system and have it checked by qualified personnel before operating it any further. AC power cord must be changed only at the qualified service shop. On placement Do not place the system in an inclined position. Do not place the system in locations where it is: Extremely hot or cold Dusty or dirty Very humid Subject to vibrations Subject to direct sunlight On heat buildup Although the unit heats up during operation, this is not a malfunction. Place the system in a location with adequate ventilation to prevent heat build-up in the system. If you continuously use this system at a large volume, the cabinet temperature of the top, side and bottom rises considerably. To avoid burning yourself, do not touch the cabinet. To prevent a malfunction, do not cover the ventilation hole for the cooling fan. On operation If the system is brought directly from a cold place to a warm place, or is placed in a very damp room, moisture may condense on the lens inside the VIDEO CD/CD player. Should this occur, the system will not operate properly. Remove the disc and leave the system turned on for about an hour until the moisture evaporates. When moving the unit, remove any disc that may be on the disc tray. Notes on CDs/VIDEO CDs Before playing a disc, clean the disc surface with a cleaning cloth. Wipe the disc from the center out. Do not play a disc with tape, stickers, or adhesives on any of its surfaces as this may damage the system. Do not use solvents. Do not expose the discs to direct sunlight or heat sources. Discs with non-standard shapes (e.g., heart, square, star) cannot be played on this system. Attempting to do so may damage the system. Do not use such discs. Cleaning the cabinet Clean the cabinet, panel and controls with a soft cloth slightly moistened with mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as thinner, benzene or alcohol. To save a tape permanently To prevent a tape from being accidentally recorded over, break off the cassette tabs from side A or side B as illustrated. Break off the cassette tab If you later want to reuse the tape for recording, cover the broken tab with adhesive tape. Before placing a cassette in the tape deck Take up any slack in the tape. Otherwise the tape may get entangled in the tape deck s playing mechanism and become damaged. When using a tape longer than 90 minutes The tape is very elastic. Do not change the tape operations such as play, stop, and fast-winding etc. too frequently. The tape may get entangled in the tape deck s playing mechanism. If you have any questions or problems concerning your system, please consult your nearest Sony dealer. 24 GB

25 Additional Information Cleaning the tape heads Clean the tape heads after every 10 hours of use. Make sure to clean the tape heads before making an important recording or after playing an old tape. Use a commercially available dry-type or wet-type cleaning cassette. For details, refer to the instructions of the cleaning cassette. Demagnetizing the tape heads Demagnetize the tape heads and the metal parts that have contact with the tape after every 20 to 30 hours of use with a commercially available demagnetizing cassette. For details, refer to the instructions of the demagnetizing cassette. In case color irregularity is observed on nearby a TV screen With the magnetically shielded type of speaker system, the speakers can be installed near a TV set. However, color irregularity may still be observed on the TV screen depending on the type of your TV set. If color irregularity is observed Turn off the TV set once, then turn it on after 15 to 30 minutes. If color irregularity is observed again Place the speakers farther away from the TV set. Troubleshooting Should you encounter a problem with your system, do the following: 1 Make sure the power cord and speaker cords are correctly and firmly connected. 2 Find your problem in the troubleshooting checklist below and take the indicated corrective action. If the problem persists after doing all of the above, consult your nearest Sony dealer. General AM 12:00 flashes in the display. A power interruption has occurred. Set the clock (see page 8) and timer settings (see pages 18 and 21) again. The timer does not function. Make sure the clock is correctly set (see page 8). You cannot operate the Daily Timer and the timer recording at the same time. c DAILY and c REC do not appear when you press CLOCK/TIMER SELECT on the remote. Make sure each timer is correctly set (see pages 18 and 21). Make sure the clock is correctly set (see page 8). The color on the TV screen is irregular. Move the speakers farther away from the TV set. The remote does not work. There is an obstacle between the remote and the unit. You are not pointing the remote in the direction of the system s sensor. The batteries in the remote have run down. Replace the batteries. Make sure that the batteries are inserted correctly. Speakers Sound comes from only one channel, or the left and right volumes are unbalanced. Check the speaker connections and placement. continued There is no sound from the speakers. Adjust the volume. The headphones are connected. Check the speaker connections. There is severe hum or noise. A TV or VCR is placed too close to the unit. Move the unit away from the TV or VCR. 25 GB

26 Troubleshooting (continued) VIDEO CD/CD Player There is no picture. Check that the system is connected securely. Make sure that you have operated the TV correctly. Make sure that you have set the SYSTEM SELECT to proper setting for the color system of your TV. Turn FUNCTION to switch to the VIDEO CD/ CD function. The VIDEO CD/CD will not play. The disc is dirty. The surface of the disc is scratched. Replace the disc. The disc is not loaded properly. The disc is loaded with the label side down. Condensation has built up in the system. Remove the disc and leave the system turned on for about an hour until the moisture evaporates. Play does not start from the first track. The player is in Program or Shuffle Play. Press PLAY MODE repeatedly until PGM and SHUFFLE disappear. Tape Deck Recording cannot be done. There is no tape in the cassette holder. The record protect tab has been removed from the cassette (see page 24). The tape has come to the end. The tape does not record or play, or there is a decrease in sound level. The heads are dirty. Clean them (see page 25). The record/playback heads are magnetized. Demagnetize them (see page 25). The tape does not erase completely. The record/playback heads are magnetized. Demagnetize them (see page 25). There is excessive wow or flutter, or the sound drops out. The capstans or pinch rollers are dirty. Clean them (see page 25). Tuner There is a severe hum or noise ( TUNED or STEREO flashes). Adjust the antenna. The signal strength is too weak. Connect an external antenna. Make sure that the antenna is connected properly. Do not bend or roll up the antenna. The two wires comprising the FM antenna have been pulled further apart since the system was first purchased. Repair or replace with a new one. The AM antenna wire is detached from the stand. Keep the antennas as far away from the speaker cords as possible. A stereo FM program cannot be received in stereo. Press STEREO/MONO on the remote until STEREO appears in the display. Resetting the system With the system turned on, press TAPE x, CD x and TUNER BAND at the same time. The system is reset to the factory settings. All previous settings are cleared and must be set again. Messages One of the following messages may appear or flash in the display during operations. NO DISC There is no disc on the disc tray. PGM FULL You try to program 21 tracks or more. Noise increases or the high frequencies are missing. The record/playback heads are magnetized. 26 GB Demagnetize them (see page 25).

27 Additional Information Specifications Amplifier section The following measured at 230 V AC, 60 Hz DIN power output (rated): W (6 ohms at 1 khz, DIN) Continuous RMS power output (reference): W (6 ohms at 1 khz, 10% THD) The following measured at 220 V AC, 60 Hz DIN power output (rated): W (6 ohms at 1 khz, DIN) Continuous RMS power output (reference): W (6 ohms at 1 khz, 10% THD) Inputs AUDIO IN MD (VIDEO) (phono jacks): Sensitivity 500/250 mv, impedance 47 kilohms MIC IN (minijack): Sensitivity 1 mv, impedance 10 kilohms Outputs OPTICAL DIGITAL OUT (CD): Optical VIDEO OUT (phono jack): max. output level 1 Vp-p, unbalanced, Sync negative, load impedance 75 ohms PHONES (stereo minijack): Accepts headphones with an impedance of 8 ohms or more VIDEO CD/CD player section System Compact disc and digital audio and video system Laser Semiconductor laser (λ = 780 nm) Emission duration: continuous Wavelength nm Video color system format NTSC, PAL OPTICAL DIGITAL OUT (CD) (Square optical connector jack, rear panel) Wavelength 660 nm Output Level 18 dbm Tape player section Recording system 4-track 2-channel stereo Frequency response 50-13,000 Hz (±3 db), using a Sony TYPE I cassette Wow and flutter ±0.15% W. Peak (IEC) 0.1% W. RMS (NAB) ±0.2% W. Peak (DIN) Tuner section FM stereo, FM/AM superheterodyne tuner FM tuner section Tuning range Antenna Antenna terminals Intermediate frequency AM tuner section Tuning range Antenna Intermediate frequency Speakers Speaker system Speaker units MHz (50-kHz step) FM wire antenna 75 ohm unbalanced 10.7 MHz 531-1,602 khz (with the tuning interval set at 9 khz) AM loop antenna, external antenna terminal 450 khz Two-way, bass reflex system, magnetically shielded type 12 cm dia., cone type woofer 2.5 cm dia., semi-dometype tweeter 6 ohms Rated impedance Dimensions (w/h/d) Approx mm Mass Approx. 2.9 kg net per speaker continued 27 GB

28 Specifications (continued) General Power requirements Power consumption 220 V AC, 50/60 Hz 75 W Dimensions (w/h/d) Approx mm incl. projecting parts and controls Mass Approx. 5.6 kg Supplied accessories Remote commander (1) AM loop antenna (1) FM wire antenna (1) Batteries (2) Video connecting cord (1) Design and specifications are subject to change without notice. Glossary Auto Pause An automatically pauses according to the signal encoded on the disc while playing a VIDEO CD. If the VIDEO CD/CD player does not resume play for a long time, press CD u (or N on the remote) to resume play manually. Menu Playback Playback using the menu screens recorded on VIDEO CDs with PBC functions. You can enjoy simple interactive software using the menu playback function. Playback Control (PBC) Signals encoded on VIDEO CDs (Version 2.0) to control playback. By using menu screens recorded on VIDEO CDs with PBC functions, you can enjoy playing simple interactive software, software with search functions, and so on. When you select a VIDEO CD with PBC functions on this system, the PBC indicator lights up. Track Sections of a picture or a music piece on disc. Each track is assigned with a track number to help you locate the track you want. VIDEO CD A compact disc which contains moving pictures. VIDEO CDs contain compact picture information using the MPEG 1 format, one of the world wide standards of digital compact technology. The picture information is compressed about 120 times. Consequently, a 12 cm VIDEO CD can contain up to 74 minutes of moving pictures. VIDEO CDs also contain compact audio information. Sounds outside the range of human hearing are compressed while the sounds we can hear are not compressed. VIDEO CDs can hold six times the audio information of conventional audio CDs. There are two versions for VIDEO CDs: Version 1.1 (VIDEO CDs without PBC functions): You can play only moving pictures and sounds. Version 2.0 (VIDEO CDs with PBC functions): You can play still pictures and enjoy PBC functions. This system conforms to both versions. 28 GB

29 29 GB Additional Information

30 2 CS

31 CS 3 CS

32 Z wj?/1 A Y x m M z X Z u x. > m M 9 q; qa qs qd qf qg qh qj qk ql wh wg wf wd ws wa w; 3 Zqj qs uws xqk.>ql mmql 5 wj wg wf wd wh wa w; Z 8 z6 Y7 Xqa x9 mm0 4 qd qg + qf qh 4 CS

33 5 CS `/1 X O # 2 y qj qk ql w; wa wf wg wh wj wk wl wd ws q; qa qs qd qf qg qh ql 4 5 wh wj 8 qj #2 qh 9 wk qa 7 ws Oqs wl ywd 6 qk qf + qg wg Nwa Xw; xqd.ws >qa mwf +qa ws

34 R # 3 L # 3 # ANTENNA FM75Ω AM U 6 CS

35 3 VIDEO OUT e E e E 4 SYSTEM SELECT NTSC PAL AUTO?/1 7 CS

36 CS

37 1 Z 2 Z u x. > m M 1 2 ux 3 3 Z 4 un x u X y t t t t CS

38 .> mm 1 2 tt t t 3 u N Z * * x O.> u N 10 CS

39 ux 2 3 un x u X.> mm u N Z 11 CS

40 1 2 3.> PGM un x u N t t t t t... y t t tt CS

41 y :48 VCD STOP CONTINUE RESUME PBC OFF REPEAT K.PON K.CON # # 1 x 2 un xu N x 13 CS

42 mm 5 PRESET 1FM1005STEREO TUNED MHz mm? mm 14 CS

43 + mm 15 CS

44 1 Z 2 x X mm Z Z Y x m M z X?/1 1 2 Yx 3 4 YN Y N 16 CS

45 z Bb Y 5 6 X X x X 17 CS

46 Bb YN 5 6 X x c CS

47 c c 19 CS

48 1 2 3 ttt tt 4 5 #2 20 CS

49 t t tttt tt c t TUNER y CD T t TAPE T 9 10@1 21 CS

50 c c 22 CS

51 @ 1 23 CS

52 24 CS

53 1 2 cc 25 CS

54 xx 26 CS

55 27 CS Ω Ω Ω Ω Ω Ω Ω Ω λ Ω Ω

56 28 CS u N Sony Corporation Printed in China