NW-E50/E70/E90

Transcription

1 (1) Portable IC Audio Player Network Walkman Operating Instructions GB CS WALKMAN is a registered trademark of Sony Corporation to represent Headphone Stereo products. is a trademark of Sony Corporation. NW-E50/E70/E Sony Corporation

2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with news papers, table cloths, curtains, etc. And don t place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Note on installation If you use the unit at a place subject to static or electrical noise, the track s transferring information may be corrupted. This would prevent successful transferring authorization on your computer. Notice for users On the supplied software Copyright laws prohibit reproducing the software or the manual accompanying it in whole or in part, or renting the software without the permission of the copyright holder. In no event will SONY be liable for any financial damage, or loss of profits, including claims made by third parties, arising out of the use of the software supplied with this player. In the event a problem occurs with this software as a result of defective manufacturing, SONY will replace it. However, SONY bears no other responsibility. The software provided with this player cannot be used with equipment other than that which is so designated. Please note that, due to continued efforts to improve quality, the software specifications may be changed without notice. Operation of this player with software other than that provided is not covered by the warranty. Depending on the type of the text and characters, the text shown on SonicStage and MP3 File Manager may not be displayed properly on device. This is due to: The capability of the connected player. The player is not functioning normally. The ID3 TAG information for the track is written in the language or the character that is not supported by the player. Program 2001, 2002, 2003, 2004 Sony Corporation Documentation 2004 Sony Corporation This manual explains how to operate your Network Walkman and how to use the MP3 file manager (pre-installed software). For details on how to use the SonicStage (supplied software), refer to the SonicStage operating instructions. (NW-E50/E70):Q/YXPD (NW-E90):Q/YXPD OpenMG and its logo are trademarks of Sony Corporation. SonicStage and SonicStage logo are trademarks or registered trademarks of Sony Corporation. ATRAC, ATRAC3, ATRAC3plus and their logos are trademarks of Sony Corporation. Microsoft, Windows and Windows Media are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. All other trademarks and registered trademarks are trademarks or registered trademarks of their respective holders. In this manual, TM and marks are not specified. 2-GB

3 Table of Contents Overview... 4 What you can do with your Network Walkman... 4 Other features... 5 Step 1: Checking the package contents... 6 Step 2: Inserting the battery... 7 Locating controls... 8 Front side... 8 Rear side... 8 Display... 9 Basic Operations Transferring audio files from the computer to your Network Walkman Note on playing songs with a limited playing period (Timeout contents) Note on playing songs with a limited playing count Listening to music with your Network Walkman What is the Group function? On other operations Advanced Operations Repeat mode Selecting the repeat mode Playing the tracks repeatedly (Track Repeat) Playing a specified section repeatedly (A-B Repeat) Playing specified sentences repeatedly (Sentence Repeat) Setting the repeat counts Changing the display mode Selecting the group display mode Adjusting treble and bass (Digital sound preset) Selecting the Sound quality Adjusting the sound quality Locking the controls (HOLD) Storing non-audio data Adjusting the settings of your Network Walkman Adjusting the time setting of your Network Walkman to a computer s built-in clock Adjusting the current time setting (DATE-TIME) Limiting the volume (AVLS) Setting the volume using the preset volume function Setting a volume level of the preset mode Switching to the manual mode Turning off the beep sound (BEEP) Changing the backlight setting Other functions Regrouping songs (REGROUP) Formatting memory (FORMAT) Other Information Precautions Troubleshooting To reset the player What happened? Messages Specifications Glossary Menu list MP3 file manager software operation What you can do with the MP3 file manager Transferring MP3 audio files from the computer to your Network Walkman Display of MP3 file manager Erasing audio file Ordering audio file Index GB 3-GB

4 Overview What you can do with your Network Walkman First, you need to install the SonicStage software into your computer (MP3 file manager software is preinstalled in your Network Walkman). You can easily transfer digital audio files from your computer to the built-in flash memory and carry it anywhere to enjoy. 1 Store digital audio files on your computer. EMD (Electric Music Distribution) Services Audio CDs MP3, WAV and Windows Media Format Audio Files Download the latest audio files! Store favorite songs! 2 Transfer files to your Network Walkman. When you transfer MP3 format audio files to your Network Walkman, use MP3 file manager software (pre-installed software) to transfer and store them as MP3 format audio files. USB connection 3 Enjoy music with your Network Walkman. 4-GB You can display the data stored in the built-in flash memory using Windows Explorer when your Network Walkman is connected to the computer. However, an MP3 format audio file cannot be played back if you drag or copy the file directly on the Windows Explorer screen. When you transfer an MP3 format audio file to your Network Walkman, be sure to use the MP3 file manager software (see page 37).

5 Other features Compact size, light weight, skip-proof operation, high portability. The pre-installed MP3 file manager software enables you to transfer MP3 format audio files to your Network Walkman and listen to them with your Network Walkman as MP3 format files. Continuous playback time with a battery NW-E50/NW-E70/NW-E90: Approximately 70* 1 hours Recording time* 2 NW-E50: 128MB built-in flash memory, more than 5 hours 50 minutes. NW-E70: 256MB built-in flash memory, more than 11 hours 40 minutes. NW-E90: 512MB built-in flash memory, more than 23 hours 20 minutes. The supplied SonicStage software enables you to record songs from audio CDs to the hard disk of your computer using the ATRAC3plus format (high sound quality, high compression). Sentence Repeat: Useful function for learning a foreign language. High-speed data transfer using the dedicated USB cable. Backlight LCD screen: song titles and artist names can be displayed. Group function: you can select songs to be played by album. Storage function: you can store a variety of data as well as audio files. * 1 Differs according to the data format. In this case, the figure for the battery duration is when continuously playing ATRAC3 format audio files. * 2 Differs according to the bit rate when recording. In this case, the figure for the recordable time is when recording at 48kbps ATRAC3plus format. NOTES: The recorded music is limited to private use only. Use of the music beyond this limit requires permission of the copyright holders. Sony is not responsible for incomplete recording/downloading or damaged data due to problems of the Network Walkman or computer. 5-GB

6 Serial NO. Step 1: Checking the package contents Please check the accessories in the package. NW-E50: Network Walkman (1) Headphones (1) Carrying pouch (1) Neck strap (1) Extension headphone cord (1) CD-ROM (1) Operating instructions (1) SonicStage operating instructions (1) Group Mode About the Serial Number The serial number provided for your device is required for the customer registration. The number is on the rear side of your Network Walkman. OPEN NW-E70: NW-E90 Network Walkman (1) Headphones (1) Earbuds (Size S, L) (1) Serial Number Group Mode Earbuds (Size S) Earbuds (Size L) Record the serial number in the space provided below. Refer to it whenever you call upon your Sony dealer regarding this product. Serial No. Dedicated USB cable (1) For the customers of NW-E70/E90 Notes The supplied headphones are a close-up design to create Powerful Bass Sound. Do not use headphones while driving. Do not use headphones while driving, cycling, or operating any motorized vehicle. It can also be potentially dangerous to play your headphones at high volume while walking, especially at pedestrian crossings. You should exercise extreme caution or discontinue use in potentially hazardous situations. When you wear the headphones, you may hear noise, such as the cord rubbing against your clothes. This is not a malfunction. 6-GB

7 Step 2: Inserting the battery Insert the LR03 (size AAA) alkaline battery with correct polarity. Be sure to insert it from the E side as illustrated. OPEN OPEN Battery duration* ATRAC3 format: Approximately 70 hours ATRAC3plus format: Approximately 60 hours MP3 format: Approximately 50 hours * The battery life may be shorter due to operating conditions and the temperature of the location. On the remaining battery indication The battery icon in the display changes as shown below. If the battery compartment lid is accidentally detached, attach it as illustrated. low battery change the battery If LOW BATT is displayed in the display, you need to change the battery. Notes If you do not use the battery correctly, it may become damaged from leakage and corrosion. For best results: Use the alkaline battery. Make sure the polarity is correct. Do not charge a dry cell battery. Remove the battery, if you do not intend to use the player for an extended period of time. If you have battery leakage, replace with a new battery after cleaning the battery compartment. 7-GB

8 Group Mode Locating controls For details about each part, refer to the pages in parentheses. Front side Rear side qs qd OPEN 6 qz 1 Strap hole for attaching the strap 2 REPEAT/SOUND button (page 15 to 16, 19) 3 MENU button (page 14, 17 to 20, 22 to 28) You can switch to the Time display by pressing the MENU button for a while. 4 GROUP button (page 13, 18) 5 Display (page 9, 15, 33) For details on the display and icons, refer to page 9. 6 ACCESS lamp (page 10, 38) 7 Headphone jack (page 12) 8 Nx button (page 12 to 20, 22 to 28) 9 Shuttle switch (page 13 to 20, 22 to 28) 0 VOLUME +/ button (page 12, 24) qa HOLD (Locking controls) switch (page 12, 20) qs USB jack (page 10, 37) qd Battery compartment (page 7) 8-GB

9 Display 1 Text/graphic information display (page 14) Displays track number, track name, current date and time (page 17 to 23), MESSAGE (page 11, 33) and menu. Press the MENU button to switch the display mode. For details, refer to Changing the display mode on page Repeat mode indication (page 14) The current repeat mode is displayed. 3 AVLS indication (page 24) The indication appears while the AVLS function is activated. 4 Digital sound preset indication (page 19 to 20) The current sound setting is displayed. 5 Remaining battery indication (page 7) The remaining battery power is displayed. 9-GB

10 Basic Operations Transferring audio files from the computer to your Network Walkman Note Before connecting your Network Walkman to the computer for the first time, be sure to install the SonicStage software from the supplied CD-ROM in your computer. Even if the SonicStage software is already installed, you need to install the SonicStage software supplied with this Network Walkman before connecting your Network Walkman to the computer (update programs may be available). You can transfer ATRAC3, ATRAC3plus format audio files from the computer to your Network Walkman using the installed SonicStage software. Follow the procedure below. You can also transfer MP3 format audio files, using the MP3 file manager that is pre-installed in your Network Walkman. For details, refer to MP3 file manager software operation on page Install the SonicStage software in your computer using the supplied CD-ROM. Follow step 1 only for the first time when you connect your Network Walkman to the computer. For details, refer to the SonicStage operating instructions. 2 Import audio files into the SonicStage software. For details, refer to the manual SonicStage operating instructions. 3 Connect your Network Walkman to your computer. Connect the small connector of the dedicated USB cable into the USB jack on the Network Walkman, then the large connector to a USB port on your computer. CONNECT appears in the display. ACCESS lamp OPEN OPEN to the USB jack to a USB port Dedicated USB cable (supplied) Notes The ACCESS lamp blinks while your Network Walkman accesses the computer. Do not disconnect the USB cable when the ACCESS lamp is blinking. The data being transferred may be destroyed. Use of your Network Walkman with a USB hub or a USB extension cable is not guaranteed. Always connect your Network Walkman to the computer directly using the dedicated USB cable. Some USB devices connected to the computer may interfere with the proper operation of your Network Walkman. The control buttons on your Network Walkman are all disabled while it is connected to a computer. You can display the data stored in the built-in flash memory using Windows Explorer when your Network Walkman is connected to the computer. 10-GB

11 Basic Operations 4 Transfer audio files to your Network Walkman. For information on transferring audio files to the built-in flash memory, refer to the separate manual SonicStage operating instructions. z Tip For information on transferring audio files back to the computer, refer to the manual SonicStage operating instructions or online Help for the SonicStage software. Note on playing songs with a limited playing period (Timeout contents) Some songs distributed via the Internet (EMD service) have a limited playing period. If you try to play an expired song, EXPIRED blinks and the next song will be played after a moment. In addition, an expired song cannot be played using the SonicStage software, or transferred to your Network Walkman. Delete any songs as needed. Note on playing songs with a limited playing count Your Network Walkman does not support contents with a limited playing count. When you try to play a song with a limited playing count, EXPIRED will be displayed and the song will not be played. 11-GB

12 G oup Mode G oup Mode Listening to music with your Network Walkman Please insert the battery before use (see page 7). Note When using Network Walkman, be sure do disconnect it from the computer. 1 Connect the headphones. To use the headphones extension cord to i jack to i jack Headphones extension cord 2 Start playback. Group Mode 1 Press the Nx button. 2 Press the VOLUME +/ button to adjust the volume. If playback does not start Make sure that the HOLD switch is set to off (page 20). To stop playback Press the Nx button. To adjust the volume The volume can be set in the PRESET and MANUAL mode (page 24 to 25). HOLD switch z Tip If your Network Walkman is not operated for 10 seconds while in stop mode, the display automatically turns off. When scrolling track titles, etc., the display turns off after scrolling is finished. When the normal playback mode is selected, playback stops automatically after the last song is played. How to install the earbuds correctly For the customers of NW-E70/E90 If the earbuds do not fit your ears correctly, low bass sound may not be heard. To enjoy better sound quality, adjust the earbuds position to sit on your ears comfortably or push them into the inside of your ears so that they fit your ears snugly. At purchase, M size earbuds are installed. If the earbuds do not fit your ears, try one of the other supplied sizes S or L. 12-GB

13 Basic Operations What is the Group function? The Group function enables you to select favorite music conveniently on your Network Walkman. You can transfer to audio files or play songs by album or artist using the Group function. Group1 Group2 Track1 Track2 Track3 Track1 Track2 Track3 The track number is the order of songs in each group. You can switch between Track Name mode and Group mode by pressing the GROUP button. In the Group mode, group names are displayed instead of track names. In addition, any shift operations, such as Skip or Repeat, are performed by group. Group3 Track1 Track2 Track3 Track1 Track2 Track3 Track1 Track1 Track2 Track3 Track1 Transferring by group The audio files transferred to the SonicStage software are always grouped when transferred to the built-in flash memory. z Tip A group created by SonicStage software has priority over one created by MP3 file manager software on your Network Walkman. On other operations Shuttle switch to (+/>) to (./ ) ode Press (Confirm) MENU button Nx button z Tip You can switch to the Group mode by pressing the Group mode button. Group Mode To Skip to the beginning of the next track/ group* 1 Skip to the beginning of the current track/ group* 1 Fast-forward* 2 Fast-rewind* 2 Shuttle switch operation Rotate the Shuttle switch clockwise once (+/>). Rotate the Shuttle switch counterclockwise once (./ ). Rotate the Shuttle switch clockwise (+/>) and hold it. Rotate the Shuttle switch counterclockwise (./ ) and hold it. * 1 Rotating and holding of the Shuttle switch during stop mode allows you to skip to the beginning of the next (current and previous) track/group continuously. * 2 Fast-forward and fast-rewind speed become faster if the operation is continued for five seconds. 13-GB

14 Advanced Operations Repeat mode There are three types of repeat mode: Track Repeat, A-B Repeat and Sentence Repeat. Track Repeat (TRK Rep) This mode plays back tracks repeatedly in the following five ways. Track Repeat mode Operation All Repeat All tracks repeatedly Single Repeat Current track repeatedly Group Repeat Current group repeatedly Group Shuffle Repeat All Groups Shuffle Repeat A-B Repeat (A-B Rep) This mode plays back the specified section in a track repeatedly. Sentence Repeat (SENTENCE Rep) This mode plays back voice data within a specified section in a track repeatedly. Selecting the repeat mode Shuttle switch to (+/>) to (./ ) ode Current group repeatedly in random order All groups repeatedly in random order Press (Confirm) MENU button Nx button Group Mode 2 Rotate the Shuttle switch to select REPEAT MODE > and press the Nx button to confirm. 3 Rotate the Shuttle switch to select a desired repeat mode and press the Nx button to confirm. TRKRep You can choose one mode among TRK Rep, A-B Rep and SENTENCE Rep. 4 Press the MENU button. The display returns to the normal screen. You can operate each repeat mode you selected, as refer to the below. TRK Rep: see Playing the tracks repeatedly (Track Repeat). A-B Rep: see Playing a specified section repeatedly (A-B Repeat). SENTENCE Rep: see Playing specified sentences repeatedly (Sentence Repeat). To cancel the Menu mode Select [RETURN] in the menu screen or press the MENU button. Notes The display automatically returns to the normal playback screen if you do not operate any button for 60 seconds. When there is no audio files in the built-in flash memory, you cannot set any repeat mode. When you connect the Network Walkman to your computer, the selected desired mode will be cancelled. You can select repeat mode only in stop mode. 1 Press the MENU button in stop mode. The menu screen is displayed. REPEAT MODE> 14-GB

15 Group Mode Group Mode Advanced Operations Playing the tracks repeatedly (Track Repeat) The Track Repeat mode is changed by pressing the REPEAT/SOUND button. You can check the current Track Repeat mode with the icon of the display. Playing a specified section repeatedly (A-B Repeat) While playing a track, you can set the start point (A) and end point (B) for a section you wish to play repeatedly. Shuttle switch Press (Confirm) Nx button REPEAT/ SOUND button to (+/>) to (./ ) ode REPEAT/SOUND button 1 Select the A-B Repeat mode (A-B Rep) (page 14). 2 Press the Nx button to start playback. Track Repeat icon Select the Track Repeat mode (TRK Rep) first (page 14). Then, press the REPEAT/SOUND button repeatedly to select the repeat mode you want. Each press changes the Track Repeat icon as follows: none (Normal play) (All Repeat) 3 Press the REPEAT/SOUND button to set the start point (A) while playing back. B blinks. A B : Press the REPEAT/SOUND button to set the end point (B). A B is displayed and the specified section is played back repeatedly. A B : 5 5 (Single Repeat) (Group Repeat) (Group Shuffle Repeat) (All Groups Shuffle Repeat) Notes You cannot set A-B Repeat for a section that overlaps two or more tracks. If you do not set the end point (B), the end point is automatically set at the end of the track. You cannot use A-B Repeat in the Group mode or when the current time is displayed. continued 15-GB

16 Group Mode Repeat mode (continued) z Tips You can fast-forward or fast-rewind by rotating the Shuttle switch, after the start point (A) is set. If the track reaches the end while fast-forwarding, the end point is set as point (B) and fast-forwarding continues. A-B Repeat starts when you release the Shuttle switch. If the track reaches the beginning while fast-rewinding, it jumps to the end of the track, the end point is set as point (B), and fast-rewinding continues. You can fast-forward or fast-rewind by rotating the Shuttle switch, during A-B Repeat playback. If the track reaches the track start/end while fast-forwarding or fast-rewinding, playback is stopped (enters Standby). A-B Repeat restarts when you release the Shuttle switch. To clear the start point (A) and end point (B) Press the REPEAT/SOUND button during A-B Repeat playback. Press the MENU button during A-B Repeat playback. Select the Group mode by pressing the GROUP button during A-B Repeat playback. Select the previous or next track by rotating the Shuttle switch during A-B Repeat playback. (The A-B Repeat mode is not canceled.) To cancel the A-B Repeat mode Change the Repeat mode in the menu screen (page 14). Playing specified sentences repeatedly (Sentence Repeat) This function automatically detects only voice data from the setting point and repeats the voice data for setting counts. It is useful for learning a foreign language. z Tip The default repeat counts setting is 2 times for one sentence. But you can change the repeat counts setting. Refer to Setting the repeat counts on page 17. Shuttle switch Press (Confirm) Nx button 1 Select the Sentence Repeat mode (SENTENCE Rep) (page 14). 2 Press the Nx button to start playback. 3 Press the REPEAT/SOUND button to place the setting point during playback. The Network Walkman detects spoken sections and non-spoken sections from the set point, and Sentence Repeat starts. (The spoken section is repeated once (during detection), and the setting is counted.) 01 00: 1 2 Notes You cannot use Sentence Repeat in the Group mode, or when the current time is displayed. A spoken or non-spoken section of less than 1 second will not be detected. If a non-spoken section is not detected until the track end, the track end point is recognized as a non-spoken section and Sentence Repeat begins from the previous spoken section. To clear the setting point Press the REPEAT/SOUND button during Sentence Repeat playback. Press the MENU button during Sentence Repeat playback. Select the Group mode by pressing the GROUP button during Sentence Repeat playback. Select the previous or next track by rotating the Shuttle switch during Sentence Repeat playback. (The Sentence Repeat mode is not canceled.) To cancel the Sentence Repeat mode Change the Repeat mode in the menu screen (page 14). to (+/>) to (./ ) ode 16-GB REPEAT/SOUND button

17 Advanced Operations Setting the repeat counts You can set the repeat counts (1-9) of one sentence for the Sentence Repeat mode. Shuttle switch Press (Confirm) Nx button Changing the display mode You can view information such as track numbers or titles in the display while music is played or stopped. Change the display mode by operating the Shuttle switch in the Menu mode. to (+/>) to (./ ) ode Group Mode Lap Time: Elapsed time display mode The following will be displayed after a music title and artist name are displayed. Track number Elapsed time MENU button :36 1 Press the MENU button. The menu screen is displayed. REPEAT MODE> 2 Rotate the Shuttle switch to select REPEAT MODE > and press the Nx button to confirm. 3 Rotate the Shuttle switch to select SENTENCE Rep and press the Nx button to confirm. COUNT: is displayed on the screen. COUNT:2 4 Rotate the Shuttle switch to select a desired repeat counts and press the Nx button to confirm. 5 Press the MENU button. The display returns to the normal screen. Play status* * Play: Displays and alternately. Stop: Displays. Search track: Displays > or.. Fast-forward/Fast-rewind: Displays M or m. Title: Title display mode When the music title includes more than 12 characters, the title will be automatically scrolled. T itle/artis Track info: Track information display mode The track title, CODEC, and bit rate are displayed. When the information includes more than 12 characters, the information will be automatically scrolled. T itle/codec/ While searching, fast-forwarding, or fast-rewinding a track, the current playing position is displayed. To cancel the Menu mode Select [RETURN] in the menu screen or press the MENU button. continued 17-GB

18 Group Mode Changing the display mode (continued) Shuttle switch to (+/>) Press (Confirm) Nx button Group Mode Selecting the group display mode For any menu mode, you can select the group display by pressing the GROUP button. to (./ ) ode MENU button GROUP button 1 Press the MENU button. The menu screen is displayed. REPEAT MODE> 2 Rotate the Shuttle switch to select DISPLAY > and press the Nx button to confirm. The selected display mode blinks. LapT ime To cancel the group mode Press the GROUP button in the group mode screen. Note The display automatically returns to the normal playback screen if you do not operate any button for 30 seconds. 3 Rotate the Shuttle switch to select a desired display mode and press the Nx button to confirm. The display switches to the selected display mode. DISPLAY> 4 Press the MENU button. The display returns to the normal screen. To cancel the menu mode Select [RETURN] in the menu screen or press the MENU button. Note The display automatically returns to the normal playback screen if you do not press any buttons for 60 seconds. 18-GB

19 Group Mode Advanced Operations Adjusting treble and bass (Digital sound preset) You can adjust the treble and bass. You can preset two settings, which can be selected during playback. Selecting the Sound quality Default settings Sound SOUND 1 SOUND 2 SOUND OFF quality (S1) (S2) (NORMAL SOUND) Bass ±0 Treble ±0 ±0 ±0 Adjusting the sound quality You can adjust the sound quality of bass and treble parts. Sound quality Emphasis level Bass -4 to +3 Treble -4 to +3 You can preset desired sound quality settings as Sound 1 and Sound 2. While playing music, you can assign a preset sound quality to music. Shuttle switch to (+/>) to (./ ) ode Press (Confirm) Nx button Group Mode MENU button REPEAT/ SOUND button 1 Press the MENU button. The menu screen is displayed. REPEAT MODE> 2 Rotate the Shuttle switch to select SOUND > and press the Nx button to confirm. Press and hold the REPEAT/SOUND button for half a second. The Sound quality setting is changed as follows: SOUND: 2 > S1 S2 (none) To return to the normal Sound quality Select SOUND OFF. continued 19-GB

20 Adjusting treble and bass (Digital sound preset) (continued) 3 Set the tone for SOUND 1. 1 Rotate the Shuttle switch to select SOUND 1 > and press the Nx button to confirm. 2 BASS:+1 appears, rotate the Shuttle switch to adjust the emphasis level of bass sound and press the Nx button to confirm. 3 TREBLE: 0 appears, rotate the Shuttle switch to adjust the emphasis level of treble sound and press the Nx button to confirm. Locking the controls (HOLD) You can protect your Network Walkman against accidental operation by using the HOLD function when carrying it. Group Mode 4 Press the MENU button The display returns to the normal screen. HOLD switch To adjust the SOUND 2 setting Select SOUND 2 in step 3. To cancel the menu mode Select [RETURN] in the menu screen or press the MENU button. Slide the HOLD switch in the direction of the arrow. All operation buttons are disabled. If you press buttons while the HOLD switch is on, HOLD blinks in the display. To release the HOLD function Slide the HOLD switch in the opposite direction of the arrow. 20-GB

21 Advanced Operations Storing non-audio data You can transfer data from the hard disk of your computer to the built-in flash memory using Windows Explorer. The built-in flash memory is displayed in Windows Explorer as an external drive (for example: as the D drive). Notes You cannot operate the SonicStage software while operating the data storage function of your Network Walkman to use files stored in the built-in flash memory. The error message Cannot access the Device/ media. will be displayed when you try to operate both of them simultaneously. If you store a lot of non-audio data into the built-in flash memory, the space for audio data is reduced by the same amount. 21-GB

22 Group Mode Adjusting the settings of your Network Walkman Adjusting the time setting of your Network Walkman to a computer s built-in clock If the function is set to ON, the time setting of your Network Walkman is automatically adjusted to the computer s built-in clock when your Network Walkman is connected and audio file transferring is executed (the SonicStage software must be started). ON is selected by default. You cannot play a song with a limited playing period without the time setting of your Network Walkman. Be sure to adjust the time setting. To set the date and time on your Network Walkman, refer to Adjusting the current time setting (DATE-TIME) on page Rotate the Shuttle switch to select PC CLK: and press the Nx button to confirm. PC CLK:ON 3 Rotate the Shuttle switch to select OFF and press the Nx button to confirm. 4 Press the MENU button The display returns to the normal screen. To change the setting to ON Select ON in step 3. To cancel the menu mode Select [RETURN] in the menu screen or press the MENU button. Shuttle switch Press (Confirm) Nx button to (+/>) to (./ ) ode MENU button Changing the setting to OFF The time setting of your Network Walkman does not change even when your Network Walkman is connected to a computer. 1 Press the MENU button. The menu screen is displayed. REPEAT MODE> 22-GB

23 Adjusting the settings of your Network Walkman Adjusting the current time setting (DATE- TIME) You can set and display the current time. You can also adjust the time setting of your Network Walkman to a computer s built-in clock by connecting your Network Walkman to the computer (page 22). Shuttle switch Press (Confirm) Nx button 4 As you did in step 3, adjust the settings for month and date. After rotating the Shuttle switch to adjust the date setting and pressing the Nx button to confirm, the display switches to the time setting screen. 0:00 5 Rotate the Shuttle switch to adjust the hour setting and press the Nx button to confirm. The minute digit blinks. 0:00 to (+/>) to (./ ) ode MENU button Group Mode 6 As you did in step 5, adjust the settings for minute. After rotating the Shuttle switch to adjust the minute setting and pressing the Nx button to confirm, the display switches to the time setting screen. 1 Press the MENU button. The menu screen is displayed. REPEAT MODE> 2 Rotate the Shuttle switch to select DATE-TIME and press the Nx button to confirm. The year digit blinks. 2004y 1m 1d 3 Rotate the Shuttle switch to adjust the year setting and press the Nx button to confirm. The month digit blinks. 2004y 1m 1d DAT E-T IME 7 Press the MENU button. The display returns to the normal screen. To cancel the menu mode Select [RETURN] in the menu screen or press the MENU button. To display the current time Press the MENU button and hold it. You can display the current time while pressing the button. Notes If the unit is not used for a long time, your settings of the date and time may be reset. If the current time is not set, the display for the date and time will be If PC CLK is set to ON (page 22), the time setting of your Network Walkman is automatically adjusted to a computer s built-in clock when your Network Walkman is connected to the computer. Depending on the shipping area, the time display format of the unit is set to a 12-hour display or a 24- hour display. You cannot switch between a 12-hour display and a 24- hour display in the unit. A 24-hour display is shown in this manual. 23-GB

24 Limiting the volume (AVLS) You can set AVLS (Automatic Volume Limiter System) to limit the maximum volume to prevent auditory disturbance or distraction. With AVLS, you can listen to music at a comfortable volume level. Shuttle switch to (+/>) Press (Confirm) Nx button Group Mode Setting the volume using the preset volume function There are two modes to adjust the volume level. Manual mode: Press the VOLUME +/ button to adjust the volume level in the range of 0 to 31. Preset mode: Press the VOLUME +/ button to set the volume level to any of three preset levels: LO, MID, or HI. to (./ ) ode Shuttle switch Press (Confirm) Nx button 1 Press the MENU button. The menu screen is displayed. REPEAT MODE> 2 Rotate the Shuttle switch to select AVLS and press the Nx button to confirm. OFF blinks. AVLS :OFF 3 Rotate the Shuttle switch to select ON and press the Nx button to confirm. The (AVLS) indication is displayed. The volume is kept at a moderate level. 4 Press the MENU button. MENU button to (+/>) to (./ ) ode Setting a volume level of the preset mode 1 Press the MENU button. The menu screen is displayed. REPEAT MODE> 2 Rotate the Shuttle switch to select VOL: MAN. VOL MENU button :MAN Group Mode VOLUME +/ button To change the setting to OFF Select OFF in step 3. To cancel the menu mode Select [RETURN] in the menu screen, or press the MENU button. 3 Press the Nx button to confirm. MAN blinks. 24-GB

25 Adjusting the settings of your Network Walkman 4 Rotate the Shuttle switch to select SET >. Switching to the manual mode VOL :SET> 1 Press the MENU button. The menu screen is displayed. 5 Press the Nx button to confirm. VOL LO xx * blinks. * xx stands for numeric values of the volume level. 2 Rotate the Shuttle switch to select VOL: SET. VOL :SET> VOL LO xx 6 Set volume levels of three preset levels: LO, MID, or HI. 1 Press the VOLUME +/ button to set the volume level of the LO preset. 2 Rotate the Shuttle switch to select VOL MID xx, and then press the VOLUME +/ button to set the volume level of the MID preset. 3 Rotate the Shuttle switch to select VOL HI xx, and then press the VOLUME +/ button to set the volume level of the HI preset. 7 Press the Nx button to confirm. 8 Press the MENU button. The display returns to the normal screen. With these settings, you can adjust the volume level to any of three preset levels: LO, MID, or HI. 3 Press the Nx button to confirm. SET > blinks. 4 Rotate the Shuttle switch to select MAN. VOL :MAN 5 Press the Nx button to confirm. 6 Press the MENU button. The display returns to the normal screen. With this setting, you can adjust the volume level by pressing the volume button. To cancel the menu mode Select [RETURN] in the menu screen or press the MENU button. Note If AVLS (page 24) is set, the actual volume may be lower than the settings. 25-GB

26 Group Mode Turning off the beep sound (BEEP) You can turn off the beep sounds of your Network Walkman. Shuttle switch to (+/>) Press (Confirm) Nx button Group Mode Changing the backlight setting You can select ON or OFF. Menu OFF ON Shuttle switch Backlight mode Always off Turns on for three seconds after each operation (or until scrolling is complete) Press (Confirm) Nx button to (./ ) to (+/>) ode MENU button to (./ ) ode 1 Press the MENU button. The menu screen is displayed. To set ON MENU button 26-GB REPEAT MODE> 2 Rotate the Shuttle switch to select BEEP: and press the Nx button to confirm. ON blinks. BEEP:ON 3 Rotate the Shuttle switch to select OFF and press the Nx button to confirm. BEEP:OFF 4 Press the MENU button. The display returns to the normal screen. To change the setting to ON Select ON in step 3. To cancel the menu mode Select [RETURN] in the menu screen, or press the MENU button. 1 Press the MENU button. The menu screen is displayed. REPEAT MODE> 2 Rotate the Shuttle switch to select LIGHT: and press the Nx button to confirm. OFF blinks. LIGHT:OFF 3 Rotate the Shuttle switch to select ON and press the Nx button to confirm. LIGHT:ON 4 Press the MENU button. The display returns to the normal screen. To change the setting to OFF Select LIGHT: OFF in step 3. To cancel the menu mode Select [RETURN] in the menu screen or press the MENU button.

27 Other functions Other functions Regrouping songs (REGROUP) The songs group function may be disabled* when a song has been deleted from or added the built-in flash memory by operating the computer in which the SonicStage software is not installed (page 10). In such a case, you may enable the group function by regrouping audio file. When you need to edit audio file, make sure that you connect your Network Walkman to the computer and use the SonicStage software. * The order of songs will not be changed even if the song group function is disabled. Shuttle switch Press (Confirm) Nx button 4 Press the Nx button. Regrouping starts and REGROUPING blinks. When regrouping audio file is complete, COMPLETE is displayed and the display returns to the indication in step 2. 5 Press the MENU button. The display returns to the normal screen. To cancel the menu mode Select [RETURN] in the menu screen or press the MENU button. Note You cannot regroup songs while playing music. ( REGROUP will not be displayed in the menu screen.) to (+/>) to (./ ) ode Group Mode z Tip In some cases, you may not be able to restore the former grouping. When you need to edit audio file, connect your Network Walkman to the computer and use the SonicStage software. MENU button 1 Press the MENU button. The menu screen is displayed. REPEAT MODE> 2 Rotate the Shuttle switch to select REGROUP and press the Nx button to confirm. REGROUP: N You cannot regroup audio file while playing music. 3 Rotate the Shuttle switch to select Y and press the Nx button to confirm. Really? is displayed. Really? 27-GB

28 Group Mode Formatting memory (FORMAT) You can use your Network Walkman to format the built-in flash memory. If memory is formatted, all data previously stored in the memory will be erased. Be sure to verify the data stored in the memory prior to formatting. Shuttle switch Press (Confirm) Nx button To cancel the menu mode Select [RETURN] in the menu screen or press the MENU button. To cancel formatting Select N in step 3. Notes You cannot format memory while playing music. ( FORMAT will not be displayed in the menu screen.) The MP3 file manager software and the MP3 audio files transferred with this software are erased as a result of formatting. When you restore the MP3 file manager software, download it from the Sony customer service website. For details, refer to MP3 file manager software operation on page 37. to (+/>) to (./ ) ode MENU button 1 Press the MENU button. The menu screen is displayed. REPEAT MODE> 2 Rotate the Shuttle switch to select FORMAT and press the Nx button to confirm. FORMAT:N You cannot format memory while playing music. 3 Rotate the Shuttle switch to select Y and press the Nx button to confirm. Really? is displayed. 4 Press the Nx button. FORMATTING blinks and formatting starts. When formatting is complete, COMPLETE is displayed and the display returns to the indication in step 2. 5 Press the MENU button. The display returns to the normal screen. 28-GB

29 Other Information Other Information Precautions On installation Never use your Network Walkman where it will be subjected to extremes of light, temperature, moisture or vibration. On the headphones Road Safety Do not use headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in many areas. It can also be potentially dangerous to play your Network Walkman at a high volume while walking, especially at pedestrian crossings. You should exercise extreme caution or discontinue use in potentially hazardous situations. On cleaning Clean your Network Walkman casing with a soft cloth slightly moistened with water or a mild detergent solution. Clean the headphone plug periodically. Note Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzene as it may mar the finish of the casing. If you have any questions or problems concerning your Network Walkman, please consult your nearest Sony dealer. Preventing hearing damage Avoid using the headphones at a high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use. Caring for others Keep the volume at a moderate level. This will allow you to hear outside sounds and to be considerate to the people around you. Warning If there is lightning when you are using your Network Walkman, take off the headphones immediately. 29-GB

30 Troubleshooting If you experience any of the following difficulties while using your Network Walkman, use this troubleshooting guide to help you to remedy the problem prior to consult a Sony dealer. Should any problem persist, consult your nearest Sony dealer. For trouble concerning operations while connected to your computer, please refer to Troubleshooting in the online help of the supplied software in addition. To reset the player If your Network Walkman does not operate normally or if there is no sound, even after checking the troubleshooting guide below, remove the battery, then re-insert it. What happened? On operating Symptom There is no sound. Noise is generated. Buttons do not work. The volume is not loud enough. There is no sound from the right channel of the headphones. Playback has stopped suddenly. Cause/Remedy The volume level is set to zero. c Turn the volume up (page 12). The headphone jack is not connected properly. c Connect the headphone jack properly (page 12). The headphone plug is dirty. c Clean the headphone plug with a soft dry cloth. Songs with a limited playing period is played. c Songs with an expired playing period cannot be played. No audio files are stored in the memory. c If NO DATA is displayed, transfer audio file(s) from the computer. The HOLD switch is set to on. c Set the HOLD switch to off (page 20). Your Network Walkman contains moisture condensation. c Keep your Network Walkman aside for a few hours. The remaining battery power is insufficient. c Replace the battery (page 7). The AVLS is enabled. c Disable the AVLS (page 24). The headphone jack is not fully connected. c Connect the headphone jack fully (page 12). The extension headphone cord is not properly connected to the headphone jack of your Network Walkman or the headphone cord. c Connect them properly (page 12). The remaining battery power is insufficient. c Replace the battery (page 7). 30-GB

31 Other Information On the display window Symptom The backlight is not turned on. s is displayed for a title. Cause/Remedy LIGHT is set to OFF. c In the menu mode, set LIGHT to ON (page 26). Characters that cannot be displayed on your Network Walkman are involved. c Use the supplied SonicStage software to rename the title with appropriate characters. On the connection with the computer or supplied software Symptom The software cannot be installed. CONNECT is not displayed when connecting to the computer with the dedicated USB cable. Your Network Walkman is not recognized by the computer when it is connected to the computer. Song cannot be transferred to your Network Walkman. Cause/Remedy An operating system not compatible with the software is used. c For details, refer to the separate manual SonicStage operating instructions. Please wait for the authentication of the SonicStage software. Another application is running on the computer. c Wait for a while and reconnect the USB cable. If the problem persists, disconnect the USB cable, restart the computer, and then reconnect the USB cable. The dedicated USB cable is disconnected. c Connect the dedicated USB cable. A USB hub is used. c Connecting via a USB hub is not guaranteed. Connect the dedicated USB cable directly to the computer. The dedicate USB cable is disconnected. c Connect the dedicated USB cable. The dedicated USB cable is not connected properly. c Connect the USB cable properly. The free space of the built-in flash memory to where you want to transfer audio files to is insufficient. c Transfer any unnecessary songs back to your computer to increase free space. You have already transferred to 400 songs or 400 groups to the builtin flash memory using the SonicStage software. c The maximum number of songs or groups that you can transfer to the built-in flash memory using the SonicStage software is 400. You have already transferred to 40,000 songs or 400 groups to the built-in flash memory using the MP3 file manager software. c The maximum number of songs and groups that you can transfer to the built-in flash memory using the MP3 file manager software is 40,000 and 400 respectively. (The maximum number of songs contained in one group is 100.) Audio files with a limited playing period or playing count may not be transferred due to restrictions set by copyright holders. For details on the settings of each audio file, contact the distributor. continued 31-GB

32 Troubleshooting (continued) Symptom The number of audio files that can be transferred to is limited. (Available recording time is short.) The operation of the Network Walkman becomes unstable while it is connected to the computer. Failed to authenticate Device/Media is displayed on the computer screen while connecting the Network Walkman to the computer. Cause/Remedy The free space of the built-in flash memory to where you want to transfer to is not enough for the size of audio files you wish to transfer. c Transfer any unnecessary audio files back to the computer to increase free space. Non-audio data is stored in the built-in flash memory to where you want to transfer audio files to. c Move non-audio data to the computer to increase free space. USB hub or USB extension cable is used. c Connecting via a USB hub or USB extension is not guaranteed. Connect the dedicated USB cable directly to the computer. Your Network Walkman is not connected to the computer properly. c Quit the SonicStage software and verify the connection of the dedicated USB cable. Restart the SonicStage software. Other Symptom There is no beep sound when your Network Walkman is operated. Your Network Walkman gets warm. Cause/Remedy BEEP is set to OFF. c In the menu mode, set BEEP to ON (page 26). Sometimes, during normal conditions, the player becomes slightly warm. 32-GB

33 Other Information Messages Follow the instructions below if an error message appears in the display. Message ACCESS AVLS CANNOT PLAY CONNECT ERROR EXPIRED Meaning Accessing the built-in flash memory. The volume level exceeds the rated value while the AVLS is enabled. Your Network Walkman cannot play certain files because of incompatible formats. Transferring has been interrupted forcefully. Your Network Walkman is connected to the computer. A malfunction is detected. The song with a playback restriction has expired. The current time has not been set to play the song with a playback restriction. The song is protected by the playback restriction that is not compatible with your Network Walkman. Remedy Please wait for access to complete. This message appears while transferring audio files and during initialization of the built-in flash memory. Turn the volume down or disable the AVLS. If the file cannot be played, you can erase it from the built-in flash memory. For details, refer to To delete abnormal data from the built-in flash memory (page 33). You can operate your Network Walkman using the SonicStage or MP3 file manager software, but you cannot operate the controls on your Network Walkman. Please consult your nearest Sony dealer. If the current time has not been set yet, set the current time in the menu mode (page 23). If song cannot be played, you can erase it from the built-in flash memory. For details, refer to To delete abnormal data from the built-in flash memory (page 33). Your Network Walkman does not support contents with a limited playing count. For details, refer to Note on playing songs with a limited playing count (page 11). Transfer the normal audio file back to the computer and then format your Network Walkman. (For details, refer to To delete abnormal data from the built-in flash memory on page 33.) Set the HOLD switch to off to operate the buttons. FILE ERROR HOLD LOW BATT MEMORY FULL The file cannot be read. The file is not normal. All operation buttons are disabled since the HOLD switch is set to on. The battery is low. The memory is full or there are 400 groups. You must change the battery (page 7). Delete songs or groups. A group without song is also regarded as one group. To delete groups without song, use the SonicStage software. Transfer normal audio files back to the computer and then format the built-in flash memory of your Network Walkman. (For details, refer to To delete abnormal data from the built-in flash memory on page 33.) If there is no audio files in the built-in flash memory, use the SonicStage software to transfer audio files. MG ERROR NO AUDIO An unauthorized distribution file is detected for copyright protection. There is no audio files in the built-in flash memory. To delete abnormal data from the built-in flash memory If CANNOT PLAY, EXPIRED, or FILE ERROR is displayed, there is a problem with all or part of the data stored in the built-in flash memory. Please follow the procedures below to erase data you cannot play. 1 Connect your Network Walkman to the computer, and start the SonicStage software. 2 If you have already specified the data with problems (such as expired songs), erase the data from the Portable Player window of the SonicStage software. 3 If the problem persists, click the button on the SonicStage software to transfer all data without problems while your Network Walkman is connected to the computer. 4 Disconnect your Network Walkman from the computer and then format the built-in flash memory using the FORMAT menu (page 28). 33-GB