XVM-R75

Size: px

Start display at page:

Download "XVM-R75"

县芳简
7 years ago
Views:

1 (2) Overhead Monitor Operating Instructions GB CT XVM-R Sony Corporation

2 2

3 Table of Contents Welcome!... 4 Precautions... 5 Location of Controls... 7 Operation Opening the Display Monitor... 9 Setting the Screen Mode Selecting the Input Source Changing the Display settings Adjusting the Volume Connections Installation diagram Connection diagram Additional Information Maintenance Specifications Troubleshooting

.. 10 Selecting the Input Source... 11 Changing the Display settings... 12 Adjusting the Volume.

4 Welcome! Thank you for purchasing the Sony Overhead Monitor. You can select PAL or NTSC colour system. In addition to normal screen mode, full screen and zoom screen modes are also available. The low reflection liquid crystal panel reduces the glare from outside lighting sources. You can manually adjust the brightness of the display according to the prevailing light conditions of the surroundings. The backlighting control (DIMMER) produces sharp contrast images free from reversed or blurred colours. This unit has 3 Audio/Video input, 1 Audio/Video output, and 7.5 V DC output terminals for connecting a video player, video game, and additional monitor. You can use wired headphones and infrared wireless headphones with this unit. 4

You can manually adjust the brightness of the display according to the prevailing light conditions of the surroundings.

5 Precautions To avoid the risk of serious injury or accident, read the following precautions before installing and operating the unit. On safety Comply with your local traffic rules and regulations. While driving - The driver must not watch or operate the monitor. It may lead to distraction and cause an accident. - The driver must not use headphones. It may lead to distraction and cause an accident. Park the car in a safe place when the driver watch and operate the monitor, or use headphones. When operating - Do not hang onto the monitor. - Do not insert your hands, fingers or foreign objects into the unit while the monitor is functioning. It may cause injury or damage to the unit. - Take care not to bump your head against the unit when getting up from the back seat. - Take extra care not to wind the wire of the headphones around your neck to avoid injury or suffocation in the event of a sudden movement of the vehicle. - Keep small articles out of the reach of children. On installation Installing this unit requires technical expertise. This unit should be installed by qualified technician or service personnel. If you try to install this unit by yourself, do it properly, referring to the installation and wiring diagrams in this operating manual. Improper installation may result in a fire or an electric shock. Before installation, be sure to turn the ignition switch to the OFF position or take the key out. Installing this unit with the ignition on may cause battery drain or a short circuit. Do not damage any pipes, tubes, the fuel tank or electric wiring when installing this unit. This can cause a fire. If you drill a hole in car panels, make sure that any hidden car parts will not be damaged. Do not use any nuts or bolts for safety devices such as steering linkage, fuel supply or braking systems. This can cause a fire or an accident. Take care to prevent the cords and wires from getting tangled or crimped in the moving portion of a seat rail. continue to next page t 5

It may lead to distraction and cause an accident. Park the car in a safe place when the driver watch and operate the monitor, or use headphones. When operating - Do not hang onto the monitor.

6 Where to install Before installing this unit, please check your local traffic rules and regulations. Follow the diagram below to install this unit in a suitable position in your car. Approximately 150 mm Approximately 300 mm Do not install this unit where: - It will obstruct the driver's view when the monitor is in either the open or closed position. - It will obstruct the operation of the airbag system. - It will obstruct the operation of the vehicle, especially the steering wheel, shift lever, or brake pedal. - A driver or passengers may injure themselves when getting into or out of the car. If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer. Before installing Make sure that the POWER SELECT switch is set to the correct position. A: If your car has an accessory position on the ignition key. (It is preset to A position at the factory setting.) B: If your car has no accessory position on the ignition key. B A When the POWER SELECT switch is set to B (OPEN/CLOSE) on the Overhead monitor turns the power on. You cannot turn on the power by (POWER) on the card remote commander. However, when the power is already on, you can operate the unit with the card remote commander. Note When you get out of the car, be sure to turn off the power by (OPEN/CLOSE) on the Overhead monitor, or (POWER) on the card remote commander. If the power is left on, it will cause battery drain. Receptor for the card remote commander 6

- It will obstruct the operation of the airbag system. - It will obstruct the operation of the vehicle, especially the steering wheel, shift lever, or brake pedal.

7 Location of Controls Monitor 1 Receptor for the card remote commander 2 OPEN/CLOSE button 9 Press to open and close the monitor. 3 MENU button 12, 13 Press to adjust the various display settings. 4 M/m buttons 5 MODE button 10 Press to change the screen mode. 6 INPUT button 11 Press to select the input source. 7 DIMMER button 12, 13 Press to set the dimmer function on and off. 8 Headphone jacks (stereo mini) 14 Connect headphones to these jacks. continue to next page t 7

4 M/m buttons 5 MODE button 10 Press to change the screen mode. 6 INPUT button 11 Press to select the input source.

8 Card remote commander RM-X123 9 ATT button 14 Press to quickly attenuate the volume. 0 MODE button 10 Press to change the screen mode. qa INPUT button 11 Press to select the input source. qs POWER button 9 qd MENU button 12, 13 Press to adjust the various display settings. qf VOL (volume) +/ buttons 14 Press to adjust the volume. qg F/f buttons Tip Refer to Replacing the lithium battery for details on how to replace the batteries (page 18). 8

qs POWER button 9 qd MENU button 12, 13 Press to adjust the various display settings.

9 Operation Opening the Display Monitor POWER OPEN/CLOSE Press (POWER) on the card remote commander. The display monitor automatically opens and the power is turned on. Operating with the unit Press (OPEN/CLOSE) on the unit. The display monitor automatically opens and the power is turned on. Closing the Display Monitor back in its enclosure Press (POWER) on the card remote commander or (OPEN/CLOSE) on the unit again. Notes Do not obstruct the movement of the LCD panel. It may cause damage to the driver monitor or the gear mechanism of the unit. If the display monitor's angle is forcibly changed due to any shock, first close the monitor by pressing (OPEN/CLOSE), then open it again. Do not try to open or close the monitor manually as a malfunction may result. Tip The LCD panel closes automatically when the ignition key is turned OFF. 9

Closing the Display Monitor back in its enclosure Press (POWER) on the card remote commander or (OPEN/CLOSE) on the unit again. Notes Do not obstruct the movement of the LCD panel.

10 Setting the Screen Mode In addition to normal screen mode, full screen and zoom screen modes are also available. MODE MODE Press (MODE) repeatedly. The current mode is displayed on the screen first. Each time the button is pressed, the screen mode switches in the following sequence: c Normal Normal (regular) screen An image with an aspect ratio of 4 to 3 (regular image). X Full Full screen An image with an aspect ratio of 4 to 3 enlarged to the left and right edges of the screen. Zoom Zoom screen An image with an aspect ratio of 4 to 3 enlarged to the left and right edges of the screen, with the overflowing parts (top and bottom) cut off to fill the screen. The screen mode is set after 5 seconds without pressing (MODE). Tip Images may appear coarse-grained when viewed in the zoom screen mode. C 10

X Full Full screen An image with an aspect ratio of 4 to 3 enlarged to the left and right edges of the screen.

11 Selecting the Input Source You can select the input source and colour system. F/f INPUT V/v INPUT 1 Press (INPUT) to select the input source, VIDEO 1, VIDEO 2 or VIDEO 3. Each time you press (INPUT), the indication changes as follows: B VIDEO 1 B VIDEO 2 B VIDEO 3 2 Press F or f to select PAL or NTSC colour system. Press either button within 5 seconds after selecting the input source. The item will be cancelled after 5 seconds without pressing one of these buttons. When NTSC Video is selected VIDEO1 NTSC When PAL Video is selected VIDEO1 PAL Operating with the unit Press (INPUT) repeatedly on the unit to select the input source. Then press V or v to select PAL or NTSC. 11

Press either button within 5 seconds after selecting the input source. The item will be cancelled after 5 seconds without pressing one of these buttons.

12 Changing the Display settings You can adjust the display settings manually if the display is hard to see from the position where you are seated. F/f MENU V/v MENU DIMMER 1 Press (MENU). The Picture screen appears. Picture vv, or MENU Each time you press (MENU), the setting screen changes in the following sequence: B Picture B Brightness B Color Menu Off*b Video Adjust (Reset) b Hue (NTSC only) b * Returns to normal screen. 2 Press F or f to adjust to the desired setting. When Picture is selected When Brightness is selected Picture vv, or MENU Brightness vv, or MENU Press f to decrease the contrast n Press F to increase the contrast Press f to darken the picture n Press F to brighten the picture 12

Picture vv, or MENU Each time you press (MENU), the setting screen changes in the following sequence: B Picture B Brightness B Color Menu Off*b Video Adjust (Reset) b Hue (NTSC

13 When Color is selected When Hue is selected (NTSC only) Color vv, or MENU Hue vv, CTR or MENU Displayed only when is in the middle of the bar. Press f for less colour intensity n Press F for more colour intensity Press f to decrease the n saturation Press F to increase the saturation When Video Adjust is selected Video Adjust; Reset vv, or MENU Picture, Brightness, Color and Hue settings will be reset to the factory preset level. Operating with the unit Press (MENU) repeatedly on the unit to select the setting you want to change. Then press V or v to adjust the setting. Setting the dimmer function on Press (DIMMER) on the unit to set the dimmer function on. The brightness of the screen will be adjusted automatically. To cancel the dimmer function Press (DIMMER) again. 13

or MENU Picture, Brightness, Color and Hue settings will be reset to the factory preset level. Operating with the unit Press (MENU) repeatedly on the unit to select the setting you want to change.

14 Adjusting the Volume You can adjust the volume of the wired headphones and connected equipment with the supplied card remote commander. ATT VOL (volume) +/ Press (VOL)(+) or (VOL)( ) on the card remote commander. Quickly attenuating the sound Press (ATT) on the card remote commander. ATT On To restore the previous volume level Press (ATT) again. Connecting headphones There are two output jacks (mini phono plug) for wired headphones on the unit. Adjust the volume using the (VOL)(+) or (VOL)( ) on the card remote commander. Using wireless headphones You can use infrared wireless headphones, MDR-IF5000 (optional) with the unit. Please refer to the operating instructions for MDR-IF5000. Note The volume of the wireless headphones cannot be adjusted with the supplied card remote commander. Use the volume control on the wireless headphones. 14

ATT On To restore the previous volume level Press (ATT) again. Connecting headphones There are two output jacks (mini phono plug) for wired headphones on the unit.

15 Connections Installation diagram Refer to the installation diagram and ask a qualified technician for the installation of the unit. Handycam Overhead Monitor Front Left speaker Tweeter Left Master unit Tweeter Right Front Right speaker Connection box Rear Left speaker Game player Subwoofer DVD changer Rear Right speaker Note All equipment other than the Overhead Monitor and Connection Box are optional. 15

Handycam Overhead Monitor Front Left speaker Tweeter Left Master unit Tweeter Right Front Right

16 Connection diagram Refer to the connection diagram for the proper connections. You can make connections shown in A area. Please ask a qualified technician for the other connections. Master unit (optional) To Speakers/Amplifier/Subwoofer (optional) RCA pin cord (optional) To AUX IN Audio output 0.1 m 0.1 m To other monitor (optional) RCA pin cord (optional) Video output Red Yellow White 0.1 m Audio L/R/ Video Input m 0.5 m (Black) To a metal surface of the car chassis Note Without an earth, noise may occur on pictures. Stereo Mini jack Output (IR) Stereo Mini Plug-to-Plug cable (5 m) To remote control sensor input 0.2 m Power remote cord Max.Supply current (0.3A) * 0.2 m (Blue) * To REMOTE IN on the Amplifier, Tuner etc. DVD Changer DVX-100 (optional) * Connection box XA-117 Front Overhead Monitor (7 wide colour LCD Monitor) Rear 1 V L R R L 2 Audio L/R / Audio L/R / Video Input 2 Video Input V (max 2 A) DC Output (for game players) 4 Pin Power connector 15 Pin connector Audio Outputs 16

1 m To other monitor (optional) RCA pin cord (optional) Video output Red Yellow White 0.1 m Audio L/R/ Video Input 1 0.2 m 0.

17 Note After connecting, bundle up the connecting cords by attaching the supplied cramper. Audio L/R/Video Input Extension cable (5 m) cramper (supplied) Power supply cord GND (1 m) (Black) GND (1 m) (Black) Back-up (5 m) (Yellow) Fuse 5 A ACC (5 m) (Red) Fuse 1 A To a metal surface of the car chassis To car battery (12 V) To ignition switch (ACC position) Cord stopper (supplied) Note After connecting, cover the connectors with the supplied cord stopper. 4 Pin Power connector * Connection box XA-117 Rear A To Audio L/R / Video Input 2 Front To Audio L/R / Video Input 3 To 7.5 V DC Output RCA pin cord (optional) RCA pin cord (optional) Polarity of the plug DC-DC cord (3 m) Handycam (optional) Game player (optional) Note Make sure that the game player s operating voltage is 7.5 V. Other voltages may cause malfunction, or damage the unit. 17

car chassis To car battery (12 V) To ignition switch (ACC position) Cord stopper (supplied) Note After connecting, cover the connectors with the supplied cord stopper.

18 Additional Information Maintenance Fuse replacement When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer. 1 2 c Warning Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit. Replacing the lithium battery Under normal conditions, batteries will last approximately 1 year. (The service life may be shorter, depending on the conditions of use.) When the battery becomes weak, the range of the card remote commander becomes shorter. Replace the battery with a new CR2025 lithium battery. Use of any other battery may present a risk of fire or explosion. + side up 2 c 1 Notes on lithium battery Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor. Wipe the battery with a dry cloth to assure good contact. Be sure to observe the correct polarity when installing the battery. Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur. 18 WARNING Battery may explode if mistreated. Do not recharge, disassemble, or dispose of in fire.

1 2 c Warning Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit.

19 About the liquid crystal display (LCD) panel Do not press on the LCD panel on the unit as doing so can distort the picture or cause a malfunction. The picture may become unclear, or the LCD panel may be damaged. Notes on cleaning Clean the LCD panel with a slightly damp soft cloth. Do not use solvents such as benzine, thinner, commercially available cleaners or antistatic spray. Do not use the unit in temperatures under 5 C or over 45 C. If your car was parked in a cold or hot place, the picture may not be clear. The monitor is not damaged. The picture will become clear after the temperature in your car becomes normal. Some stationary blue or red dots may appear on the monitor. These are called bright spots, and can happen with any LCD. The LCD panel is highly sophisticated, and more than % of the segments used in the panel are flawless. However, there is a possibility that less than 0.01 % of the segments are defective and may not light up properly. 19

Do not use solvents such as benzine, thinner, commercially available cleaners or antistatic spray. Do not use the unit in temperatures under 5 C or over 45 C.

20 Specifications Monitor System Display Drive system Liquid crystal colour display Motorized flipdown panel TFT-LCD active matrix system Picture size 7 inches wide screen (16:9) mm, 176 mm (w/h, d) Picture segment 336,960 (w 1440 h 234) dots Power requirements 12 V DC car battery (negative earth) Current drain Dimensions Approx. 1.5 A mm (w/h/d) Operating temperature 5 C 45 C Mass Approx. 1.3 Kg Connection box XA-117 A/V Output Output Impedance: less than 220 Ω less than 100 pf Output Level: 0 dbs ±0.3 db (0.775 V rms) (Vol Max) Video: 75 Ω 1Vp-p A/V Input 3 Input Impedance: more than 10 K Ω less than 1000 pf Input Level: ±1.3 dbs +0/ 0.3 db (0.775 V rms) Video: 75 Ω 1 Vp-p DC output 7.5 V (max 2 A) Dimensions mm (w/h/d) Mass Approx. 150 g Card remote commander RM-X123 Power requirements CR2025 lithium battery Operable range Approx. 2.5 m Dimensions mm (w/h/d) Mass Approx. 25 g (including batteries) Supplied accessories Connection box XA-117 (1) Card remote commander RM-X123 (with supplied battery) (1) Extension cable (5 m) (1) Power supply cord (1) DC-DC cord (3 m) (1) Stereo Mini Plug-to-Plug cable (5 m) (1) Mounting plate (1) Screws (4) Tapping Screws (4) Cord stopper (1) Cramper (1) Operating Instructions (1) Optional accessory DVD Changer DVX-100 Design and specifications are subject to change without notice. 20

1.3 Kg Connection box XA-117 A/V Output Output Impedance: less than 220 Ω less than 100 pf Output Level: 0 dbs ±0.3 db (0.

21 Troubleshooting The following checklist will help you solve problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. General No picture, no sound Good picture, but no sound Dotted lines or stripes No picture, or no sound when you connect optional equipment Makes noise when the ignition key is in the ON, ACC, or OFF position. No response when pressing the buttons on the card remote commander The power cord or battery has been disconnected. The fuse has blown. Press the (VOL)(+) or (ATT) on the card remote commander. This may be caused by local interference such as a car engine or motorcycle. Adjust the aerials for minimum interference. The cord has been disconnected. Connect the cord securely. The battery may be exhausted. 21

22 2

23 3

24 4

25 t 5

26 A A B B A B (OPEN/CLOSE) (POWER) (OPEN/CLOSE) (POWER) 6

27 M m t 7

28 RM-X qa qs qd qf qg F f 8

29 (POWER) (OPEN/CLOSE) (POWER)(OPEN/CLOSE) (OPEN/CLOSE) 9

30 (MODE) c Normal X Full Zoom C (MODE) 10

31 F f V v (INPUT) (INPUT) B B B F f VIDEO1 NTSC VIDEO1 PAL (INPUT)V v 11

32 F f V v (MENU) Picture vv, or MENU (MENU) B B B * b b b * F f Picture vv, or MENU Brightness vv, or MENU f n F f n F 12

33 Color vv, or MENU Hue vv, CTR or MENU f n F f n F Video Adjust; Reset vv, or MENU (MENU) V v (DIMMER) (DIMMER) 13

34 (VOL)(VOL) (ATT) ATT On (ATT) (VOL) (VOL) 14

35 15

36 16 R L V 1 2 L R * A * *

37 17 * A

38 1 2 c 2 c 1 18

39 19

40 20 Ω ± Ω Ω ±. Ω

41 (VOL)(ATT) 21

44 Sony Corporation Printed in Taiwan

XVM-B62

XVM-B62 2-696-042-31 (1) Mobile Monitor Operating Instructions GB CS XVM-B62 2007 Sony Corporation Welcome! Thank you for purchasing the Sony Mobile Monitor. PAL or NTSC colour system compatible Wide, Zoom, and