Pearson BTEC Higher National Diploma (HND) in Electrical Engineering 電機工程英國國家高級文憑 Course Code: HND014 Reg No. 262615 It is a matter of discretion for individual employers to recognize any qualification to which this course may lead 個別僱主可酌情決定是否承認本課程可令學員獲取的任何資格 Pearson BTEC 簡介 英國愛德思 (Pearson) 國家職業學歷與學術考試機構, 是英國規模最大的學歷與職業資格頒証機構之一 Pearson 由英國主要職業資格考試機構 商業與技術教育委員會 BTEC 和倫敦大學考試與評估委員會 (ULEAS) 合併而成 Pearson 的所有課程都由英國教育與技能部 DfEs 和英國教學大綱與學歷管理委員會 QCA 共同監管 Pearson 跟政府機構 學術機構及企業緊密合作,Pearson BTEC HND 在全球獲 120 個國家的大學認可 課程簡介 電機工程課程內容由英國愛德思國家職業學歷與學術考試機構 (BTEC) 提供, 並結合本港實際工程界的需要, 由香港設施工程學院 (HKCE) 主辦 此課程給予學員廣泛而全面的知識, 為學生建立良好的學術基礎, 學員可自行報讀英國或海外大學的學位課程 以學生為主的互動式教學, 讓學生通過完成與職業相關的課程, 學以致用, 注重應用操作 團隊合作 案例分析 實踐創新 除專業及關鍵技能外, 重視職業的通用技能培訓 摒棄傳統考試的學習評估模式, 每學科以習作成績作為評核標準, 令學員能輕鬆學習 證書頒發 學員需在指定時間內成功完成指定 16 科, 並且所有功課合格, 將獲得由英國愛德思國家職業學歷與學術考試機構 (BTEC) 頒發國際認可英國國家高級文憑 (Higher National Diploma) 成功取得 Pearson BTEC HND 之學員, 可自行向香港學術及職業資歷評審局 ( 評審局 ), 取得本港認可的資格 可獲本學院介紹或自行報讀海外大學 開課日期 : 每年 2 月, 5 月, 8 月, 11 月 HND014_Aug 2018_R15-1 -
入學條件 標準入學條件 : 中七畢業 (F.7); 或中學文憑試畢業 (DSE); 或持有基礎文憑 (OD/PD); 或持有專業證書 / 英國國家高級證書 (HNC/HC); 或 非標準入學條件 ( 須年滿 21 歲 ) : 中 5 畢業並有最少 5 年工作經驗及面試 ; 或毅進課程畢業並有最少 3 年工作經驗及面試 ; 或有關 10 年工作經驗及面試 ( 本學院可視乎情況決定是否取錄未符合 標準入學條件 的學生 ) 申請豁免條款 ( 一經報名, 恕不接受任何豁免申請 ) 學員請於報讀時, 提供有關學歷文件, 獲豁免科目必須與 BTEC 課程內容相吻合, 唯香港設施工程學院擁有最終豁免及解釋權 為確保豁免科目符合 BTEC 要求, 學員需跟從指示提供相關的學術文件及成績, 以供本學院審核及評分 豁免審核費每科 HK$1,000 ( 成功與否均不設退還 ), 學員同時須遞交成功豁免科目的 Assignment 課程大綱 B5E01 Analytical Methods for Engineers B5E02 Engineering Science B5E03 Project Design, Implementation and Evaluation B5E05 Electrical and Electronic Principles B5E06 Health, Safety and Risk Assessment in Engineering B5E08 Engineering Design B5E28 Research Project B5E30 Quality Assurance and Management B5E39 Electronic Principles B5E59 Advanced Mathematics for Engineering B5E63 Electrical Power B5E64 Electrical and Electronic Measurement and Testing B5E65 Utilisation of Electrical Energy B5E66 Electrical, Electronic and Digital Principles B5E67 Further Electrical Power B5E68 Applications of Power Electronics HND014_Aug 2018_R15-2 -
課程內容 Course Content B5E01 Analytical Methods for Engineers Be able to analyse and model engineering situations and solve problems using algebraic methods. Be able to analyse and model engineering situations and solve problems using trigonometric methods. Be able to analyse and model engineering situations and solve problems using calculus. Be able to analyse and model engineering situations and solve problems using statistics and probability. B5E02 Engineering Science Be able to determine the behavioural characteristics of elements of static engineering systems. Be able to determine the behavioural characteristics of elements of dynamic engineering systems. Be able to apply DC theory to solve electrical and electronic engineering problems. Be able to apply single phase AC theory to solve electrical and electronic engineering problems. B5E03 Project Design, Implementation and Evaluation Be able to formulate a project. Be able to implement the project within agreed procedures and to specification. Be able to evaluate the project outcomes. Be able to present the project outcomes. B5E05 Electrical and Electronic Principles Be able to apply electrical and electronic circuit theory. Be able to apply two-port network models. Understand the use of complex waves. Be able to apply transients in R-L-C circuits. B5E06 Health, Safety and Risk Assessment in Engineering Be able to select and apply safe working procedures to engineering operations. Understand the nature and use of current health and safety legislation. Be able to analyse engineering activities for the assessment of risk. Be able to manage and minimise risk to life, property and engineering activities within an industrial environment. B5E08 Engineering Design Be able to prepare a design specification to meet customer requirements. Be able to analyse and evaluate possible design solutions and prepare a final design report. Understand how computer-based technology is used in the engineering design process. B5E28 Research Project Understand how to formulate a research specification. e able to implement the research project within agreed procedures and to specification. Be able to evaluate the research outcomes. Be able to present the research outcomes. B5E30 Quality Assurance and Management Understand how total quality management (TQM) systems operate. Know the key factors of quality assurance (QA) techniques. Be able to apply quality control (QC) techniques. B5E39 Electronic Principles Be able to apply testing procedures for semiconductor devices and circuits. Understand the characteristics and operation of amplifier circuits. Understand the types and effects of feedback on circuit performance. Understand the operation and applications of sine wave oscillators. B5E59 Advanced Mathematics for Engineering Be able to analyse and model engineering situations and solve engineering problems using series and numerical methods for the solution of ordinary differential equations. Be able to HND014_Aug 2018_R15-3 -
B5E63 B5E64 B5E65 B5E66 B5E67 B5E68 analyse and model engineering situations and solve engineering problems using Laplace transforms. Be able to analyse and model engineering situations and solve engineering problems using Fourier series. Be able to analyse and model engineering situations and solve engineering problems using partial differential equations. Electrical Power Be able to analyse three-phase systems. Understand the sources and effects of harmonics in power systems. Understand methods of power distribution. Understand the economics of components, power systems and alternative energy. Electrical and Electronic Measurement and Testing Be able to analyse a measurement system and solve problems relating to the characteristics of a signal. Be able to analyse the principles and techniques employed in measurement. Be able to select and use test equipment to measure a range of signals. Be able to apply the principles and techniques used in data acquisition systems. Utilisation of Electrical Energy Understand the operation of power transformers. Understand the applications of circuit protection for distribution and installation systems. Understand the design and construction of lighting systems. Be able to determine the cost of energy used in a system in order to be energy efficient. Understand the operation of a polyphase induction motor. Electrical, Electronic and Digital Principles Be able to apply complex notation in the analysis of single phase circuits. Be able to apply circuit theory to the solution of circuit problems. Understand the operation of electronic amplifier circuits used in electro-mechanical systems. Be able to design and test digital electronic circuits used in electro-mechanical systems. Further Electrical Power Understand the construction and properties of overhead lines and cables. Understand symmetrical faults and protection schemes. Be able to analyse power system transients. Understand the synchronising and control of synchronous machines. Applications of Power Electronics Understand common configurations for controlled and uncontrolled rectification. Understand the methods used for AC motor control. Understand the methods used for DC motor control. Understand other applications of power electronics. HND014_Aug 2018_R15-4 -
授課詳情 授課語言 : 粵語教授輔以英文講義 課程師資 : 所有講師皆為註冊工程師 (CEng & RPE) 或註冊設施經理或同等學歷 ; 或 持有大學學位及最少 5 年以上工作經驗 單元 : 16 單元 筆記 : 僅提供電子筆記 課程長度 : 最短 12 個月, 最長 60 個月 ( 由註冊之日起計算 ) 評分標準 : 本課程學習成績以習作為主要審核標準, 學員無需應付考試! 截止報名 : 課程開課前兩星期 ( 詳情請向職員查詢 ) 報名詳情 請帶備報名費 HK$500 元正連同以下文件一併交回本學院 : - 已填妥的報名表 - 履歷表 - 畢業證書 - 公司推薦書 ( 如有 ) 查詢熱線 : 31658168 電郵地址 : enquiry@tdpedu.org 學院網址 : http://www.tdpedu.org HND014_Aug 2018_R15-5 -