CMT-BX50BT

Transcription

1 (1) Micro HI-FI Component System 迷你音响组合 Operating Instructions GB 使用说明书 CS 在使用产品前, 请仔细阅读本使用说明书 CMT-BX50BT 2008 Sony Corporation

2 WARNING To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Do not expose batteries or apparatus with battery-installed to excessive heat such as sunshine, fire or the like. RISK OF ELECTRIC SHOCK DO NOT OPEN No operator serviceable parts inside. Refer servicing to qualified personnel. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. In door use only. CAUTION The use of optical instruments with this product will increase eye hazard. Except for customers in the U.S.A. and Canada This appliance is classified as a CLASS 1 LASER product. This marking is located on the rear exterior. Note on DualDiscs A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed. Music discs encoded with copyright protection technologies This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. GB

3 Table of Contents Guide to parts and controls... 4 Information on the display... 8 Getting Started Hooking up the system securely... 9 Setting the clock...11 Others Troubleshooting...25 Messages...28 Precautions...29 Specifications...31 Bluetooth wireless technology...32 Basic Operations Playing a CD/MP3 disc...12 Listening to the radio...13 Using the Bluetooth function...14 Using optional audio components...20 Adjusting the sound...20 Changing the display...21 Other Operations GB Creating your own program (Program Play)...22 Presetting radio stations...23 Using the Timers...24 GB

4 Guide to parts and controls This manual mainly explains operations using the remote, but the same operations can also be performed using the buttons on the unit having the same or similar names. Unit Front panel Top panel GB

5 Remote BLUETOOTH button (page 16, 18, 19) Press to make a connection, disconnection, or pairing with a Bluetooth device. BLUETOOTH indicator (page 18, 19) Lights up when the Bluetooth function is active. (open/close) button (page 12) Press to open or close the disc tray. Guide to parts and controls / (power) button (page 11, 24, 27, 28) Press to turn on the system. STANDBY indicator (page 21, 25) Lights up when the system is turned off. Remote sensor (page 25) AUDIO IN jack (page 20) Connect to an optional audio component. PHONES jack Connect the headphones. Playback buttons and function buttons Unit: BLUETOOTH (play/ pause) button (page 15, 16) Press to select the Bluetooth function. Press to start or pause playback of the music on the Bluetooth device (Bluetooth mobile phone, etc.). Continued GB

6 Unit: CD (play/pause) button (page 12) Press to select the CD function. Press to start or pause playback of a disc. Remote: CD button (page 12) Press to select the CD function. Remote: (play) button, (pause) button Press to start or pause playback. TUNER/BAND button (page 13) Press to select the TUNER function. Press to select FM or AM reception mode. AUDIO IN button (page 20) Press to select the AUDIO IN function. FUNCTION button (page 13, 18, 19) Press to select the function. REPEAT/FM MODE button (page 12, 13) Press to listen to a disc, a single track or file repeatedly. Press to select the FM reception mode (monaural or stereo). PLAY MODE/TUNING MODE button (page 12, 13, 22, 23) Press to select the play mode of a CD or MP3 disc. Press to select the tuning mode. ENTER button (page 11, 15, 22, 23, 24) Press to enter the settings. / (go back/go forward) button (page 12, 15, 16, 22, 24) Press to select a track or file. Unit: TUNE +/ (tuning) button (page 13) Remote: +/ (tuning) button (page 13, 23) Press to tune in the desired station. +/ (select folder) button (page 12, 22) Press to select a folder. / (rewind/fast forward) button (page 12, 15, 16) Press to find a point in a track or file. Unit: VOL +/ button (page 12, 13, 16, 19, 20) Remote: VOLUME +/ button (page 12, 13, 16, 19, 20) Press to adjust the volume. GB

7 DISPLAY button (page 16, 21) Press to change the information on the display. Sound buttons (page 20) Unit: DSGX button Remote: EQ button Press to select the sound effect. Unit: /CANCEL (stop/cancel) button (page 12, 13, 15, 16, 18) Remote: (stop) button (page 12, 13, 15, 16, 18) Press to stop playback. CLEAR button (page 16, 18, 22) Press to delete a pre-programmed track or file. Press to erase the pairing registration information of the Bluetooth device. TUNER MEMORY button (page 23) Press to preset the radio station. SLEEP button (page 24) Press to set the Sleep Timer. Guide to parts and controls CLOCK/TIMER SELECT button (page 24) CLOCK/TIMER SET button (page 11, 24) Press to set the clock and the Play Timer. Battery compartment lid (page 10) GB

8 Information on the display Function Audio format Play mode (page 12) Tuner reception mode (page 13) Tuner reception (page 13) DSGX (page 20) Timer (page 24) Play/Pause Text information GB

9 Getting Started Hooking up the system securely Getting Started or Right speaker Left speaker Wall socket Speaker cord (Red/) Speaker cord (Black/) AM loop antenna FM lead antenna (Extend it horizontally.) White side for North American model Brown side for other regions Continued GB

10 Antennas Find a location and an orientation that provide good reception, and then set up the antenna. Keep the antennas away from the speaker cords and the power cord to avoid picking up noise. To use the remote Slide and remove the battery compartment lid, and insert the two supplied R6 (size AA) batteries, side first, matching the polarities shown below. Speakers Insert only the stripped portion of the speaker cords into the SPEAKER jacks. Power For models with a voltage selector, set VOLTAGE SELECTOR to the local power line voltage. Connect the power cord to a wall socket. If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor). When carrying this system 1 Remove a disc to protect the CD mechanism. Notes With normal use, the batteries should last for about six months. Do not mix an old battery with a new one or mix different types of batteries. If you do not use the remote for a long period of time, remove the batteries to avoid damage from battery leakage and corrosion. 2 Press CD to select the CD function. 3 Hold down VOL + and DSGX on the unit, and press on the unit until STANDBY appears. 4 After LOCK appears, unplug the power cord. 10 GB

11 Setting the clock Use buttons on the remote to set the clock. 1 Press / to turn on the system. 2 Press CLOCK/TIMER SET. The hour indication flashes in the display. If PLAY SET? flashes in the display, press / repeatedly to select CLOCK SET? and then press ENTER. 3 Press / repeatedly to set the hour, and then press ENTER. 4 Use the same procedure to set the minutes. The clock settings are lost when you disconnect the power cord or if a power failure occurs. To display the clock when the system is off Press DISPLAY. The clock is displayed for about 8 seconds. Getting Started 11 GB

12 Basic Operations Playing a CD/MP3 disc 1 Select the CD function. Press CD. 2 Place a disc. Press on the unit, and place a disc with the label side up on the disc tray. To close the disc tray, press on the unit again. Do not force the disc tray closed with your finger, as this may damage the unit. 3 Start playback. Press (or CD on the unit). 4 Adjust the volume. Press VOLUME +/ (or VOL +/ on the unit). Other operations To Press Pause playback (or CD on the unit). To resume play, press the button again. Stop playback. Select a folder +/. on an MP3 disc Select a track /. or file Find a point in a track or file Select Repeat Play Hold down / during playback, and release the button at the desired point. REPEAT repeatedly until REP or REP1 appears. To change the play mode Press PLAY MODE repeatedly while the player is stopped. You can select normal play ( * for all MP3 files in the folder on the disc), shuffle play ( SHUF or SHUF* ), or program play ( PGM ). * When playing a CD-DA disc, (SHUF) Play performs the same operation as normal (shuffle) play. Notes on Repeat Play All tracks or files on a disc are played repeatedly up to five times. REP1 indicates that a single track or file is repeated until you stop it. 12 GB

13 Notes on playing MP3 discs Do not save other types of files or unnecessary folders on a disc that has MP3 files. Folders that have no MP3 files are skipped. MP3 files are played back in the order that they are recorded onto the disc. The system can only play MP3 files that have a file extension of.mp3. If there are files on the disc that have the.mp3 file extension, but that are not MP3 files, the unit may produce noise or may malfunction. The maximum number of: folders is 255 (including the root folder). MP3 files is 511. MP3 files and folders that can be contained on a single disc is 512. folder levels (the tree structure of files) is 8. Compatibility with all MP3 encoding/writing software, recording device, and recording media cannot be guaranteed. Incompatible MP3 discs may produce noise or interrupted audio or may not play at all. Listening to the radio 1 Select FM or AM. Press FUNCTION (or TUNER/ BAND on the unit) repeatedly. 2 Select the tuning mode. Press TUNING MODE repeatedly until AUTO appears. 3 Tune in the desired station. Press +/ (or TUNE +/ on the unit). Scanning stops automatically when a station is tuned in, and then TUNED and STEREO (for stereo programs only) appear. Basic Operations Notes on playing multisession discs If the disc begins with a CD-DA (or MP3) session, it is recognized as a CD-DA (or MP3) disc, and other sessions are not played back. A disc with a mixed CD format is recognized as a CD-DA (audio) disc. 4 Adjust the volume. Press VOLUME +/ (or VOL +/ on the unit). To stop automatic scanning Press. To tune in a station with a weak signal If TUNED does not appear and the scanning does not stop, press TUNING MODE repeatedly until AUTO and PRESET disappear, and then press +/ (or TUNE +/ on the unit) repeatedly to tune in the desired station. To reduce static noise on a weak FM stereo station Press FM MODE repeatedly until MONO appears to turn off stereo reception. 13 GB

14 Using the Bluetooth function This system supports Bluetooth A2DP and AVRCP profiles. For details on Bluetooth wireless technology, see Bluetooth wireless technology (page 32). Check the websites below for the latest information about compatible devices. < Listening to music of a Bluetooth mobile phone or Bluetooth device You can listen to music from your Bluetooth mobile phone or Bluetooth device over a wireless connection. Follow the procedure below to listen to music from Bluetooth devices with this system. Pairing this system with a Bluetooth device Connecting to registered devices Playing music of a Bluetooth device For details about the operations of the Bluetooth device, also refer to the operation manual supplied with your Bluetooth device. 14 GB

15 Pairing this system with a Bluetooth device Pairing is an operation where Bluetooth devices register with each other beforehand. Use the procedure below to pair the system with your Bluetooth device. Once a pairing operation is performed, it does not need to be performed again. If pairing is already completed, proceed to Playing music of a Bluetooth device (page 16). 1 Place the Bluetooth device to be connected to this system within 1 meter of the system. 2 Select the Bluetooth function. Press BLUETOOTH on the unit. 3 Operate the Bluetooth device and perform the pairing operation. For details about the operations of the Bluetooth device, refer to the operation manual supplied with your Bluetooth device. When searching for this system with the Bluetooth device, a list of the devices found may appear in the Bluetooth device display depending on the type of Bluetooth device. This system appears as CMT- BX50BT. When establishing a connection with this system, select the audio profile (A2DP, AVRCP) at the Bluetooth device. If the Bluetooth device does not support the AVRCP profile, you cannot perform playback or other operations with the system (page 16). 4 Enter the passkey. Passkey entry may be required depending on the type of Bluetooth device. When PIN? and a countdown appear, enter the passkey at the system as follows: Press / and / on the remote (or +/ and / on the unit) to enter the same passkey that was entered at the Bluetooth device, and then press ENTER. Once pairing is completed and the connection is established, the system display changes as follows: Connect Name of the Bluetooth device To cancel passkey entry partway Press. If passkey entry still required, turn off the Bluetooth device. Notes Passkey may be called Passcode, PIN code, PIN number or Password, etc. depending on the device. This system only supports numerical passkeys up to 4 digits. The pairing standby status of the system is cancelled after about 30 seconds. If pairing is not successful, redo the procedure from step 1. While connected to a Bluetooth device, this system cannot be detected and a connection cannot be established from another Bluetooth device. Basic Operations Continued 15 GB

16 To erase all the pairing registration information 1 Press BLUETOOTH on the unit. When the system is connected with a Bluetooth device (when the Bluetooth device name or other information appears in the system display), press and hold BLUETOOTH on the unit for about 2 seconds to put the system in Bluetooth standby mode. 2 Press CLEAR. Delete? appears. 3 Press ENTER. Complete! appears and all the pairing information is erased. Note In order to connect with a Bluetooth device after performing this operation, you must enter the passkey again. Playing music of a Bluetooth device You can operate a Bluetooth device by connecting the system and a Bluetooth device using AVRCP. 1 Select the Bluetooth function. Press BLUETOOTH on the unit. 2 Establish a connection from the Bluetooth device. For details about the operations of the Bluetooth device, refer to the operation manual supplied with your Bluetooth device. Once the connection is established, the system display changes as follows: Connect Name of the Bluetooth device 3 Start playback. Press (or BLUETOOTH on the unit). Depending on the Bluetooth device, you may need to start up the AV software of the Bluetooth device beforehand. 4 Adjust the volume. Press VOLUME +/ (or VOL +/ on the unit). To check the address of a connected Bluetooth device Press DISPLAY while the Bluetooth device name appears in the system display. The Bluetooth device address appears for 8 seconds. To cancel the connection with a Bluetooth device Press and hold BLUETOOTH on the unit for about 2 seconds until Disconnect appears, or until the information on the display (device name, etc.) disappears. Other operations To Press Pause playback (or BLUETOOTH on the unit). Stop playback. Select a folder +/. Select a file /. Find a point in a file Hold down /. 16 GB

17 Note These operations may not be available for certain Bluetooth devices. In addition, the actual operations may differ depending on the connected Bluetooth device. Listening to music on this system using Bluetooth headphones Notes on connections with Bluetooth devices If you cannot connect with a paired Bluetooth device, perform the pairing operation between the system and the Bluetooth device again. Depending on the type of Bluetooth device, you can adjust the volume using the controls of the Bluetooth device. When BLUETOOTH on the unit is pressed while connected to Bluetooth headphones, it may take some time until a connection is made to the system from another Bluetooth device. Use the A2DP-capable or A2DP- and AVRCP-capable Bluetooth device with the system in a peer-to-peer environment. You can listen to music played on this system using your Bluetooth headphones over a wireless connection. Basic Operations Tip Bluetooth devices that have been connected with this system in the past are registered with this system. When a Bluetooth connection is not currently established, you can easily connect the system to a Bluetooth device by pressing BLUETOOTH on the unit. (Connection is attempted with up to 3 devices in order from the most recently connected device, and the attempts end when a connection is established.) This function may not be available depending on the Bluetooth device you are using. If a connection cannot be made, the system returns to the standby mode. Follow the procedure below to listen to music on this system with Bluetooth headphones. Pairing this system with Bluetooth headphones Connecting to registered headphones Playing music on this system For details about the operations of the Bluetooth headphones, also refer to the operation manual supplied with your Bluetooth headphones. Continued 17 GB

18 Pairing this system with Bluetooth headphones Pairing is an operation where Bluetooth devices register with each other beforehand. Use the procedure below to pair the system with your Bluetooth headphones. Once a pairing operation is performed, it does not need to be performed again. If pairing is already completed, proceed to Playing music on this system (page 19). 1 Select a function other than the Bluetooth function. Press FUNCTION repeatedly. 2 Place the Bluetooth headphones to be connected to this system within 1 meter of the system. 3 Put the Bluetooth headphones in pairing mode. For details about the operations of the Bluetooth headphones, refer to the operation manual supplied with your Bluetooth headphones. 4 Press and hold BLUETOOTH on the unit for about 7 seconds until the BLUETOOTH indicator flashes. Sound output from the speakers is stopped. 5 Enter the passkey. Follow the same procedure as in step 4 of Pairing this system with a Bluetooth device (page 15). Once pairing is completed and the connection is established, the system display changes as follows: Connect Name of the Bluetooth device To cancel passkey entry partway Press. Notes Passkey may be called Passcode, PIN code, PIN number or Password, etc. depending on the device. This system only supports numerical passkeys up to 4 digits. The pairing standby status of the system is cancelled after about 30 seconds. If pairing is not successful, redo the procedure from step 1. While connected to a Bluetooth device, this system cannot be detected and a connection cannot be established from another Bluetooth device. Pairing may not be possible if other Bluetooth devices are present around the system. In this case, turn off the other Bluetooth devices. To erase all the pairing registration information 1 Press BLUETOOTH on the unit. When the system is connected with a Bluetooth device (when the Bluetooth device name or other information appears in the system display), press and hold BLUETOOTH on the unit for about 2 seconds to put the system in Bluetooth standby mode. 2 Press CLEAR. Delete? appears. 3 Press ENTER. Complete! appears and all the pairing information is erased. Note To connect with Bluetooth headphones after performing this operation, you must enter the passkey again. 18 GB

19 Playing music on this system You can operate this system from Bluetooth headphones by connecting the system and Bluetooth headphones using AVRCP. 1 Select a function other than the Bluetooth function. Press FUNCTION repeatedly. 2 Establish a connection with the Bluetooth headphones. Press and hold BLUETOOTH on the unit for about 2 seconds until the BLUETOOTH indicator lights up, then release the button. Sound output from the speakers is stopped. If more than one Bluetooth device that has been connected in the past is present around the system, the system attempts to connect with up to 3 most recently connected devices. (Connection is attempted with up to 3 devices in order from the most recently connected device, and the attempts end when a connection is established.) Once the connection is established, the system display changes as follows: Connect Name of the Bluetooth device 3 Start playback of the music for the function selected in step 1. Depending on the type of Bluetooth headphones, you can operate this system (playback, volume control, etc.) using the headphone s controls. For details about the operations of the Bluetooth headphones, refer to the operation manual supplied with your Bluetooth headphones. 4 Adjust the volume. Press VOLUME +/ (or VOL +/ on the unit). To cancel the connection with Bluetooth headphones Press and hold BLUETOOTH on the unit for about 2 seconds until the BLUETOOTH indicator turns off. Sound is output from the speakers. Notes If you cannot connect with paired Bluetooth headphones, perform the pairing operation between the system and the Bluetooth headphones again. When the system is changed to a function other than the Bluetooth function and BLUETOOTH on the unit is pressed while connected to a Bluetooth device, it may take some time until a connection is made with the Bluetooth headphones. This system stores separate volume settings for when listening through the speakers or PHONES jack on the unit, or when listening through Bluetooth headphones. Use the A2DP-capable or A2DP- and AVRCP-capable Bluetooth device with the system in a peer-to-peer environment. Basic Operations 19 GB

20 Using optional audio components 1 Connect additional audio component to the AUDIO IN jack on the unit using an audio analog cord (not supplied). 2 Turn down the volume. Press VOLUME (or VOL on the unit). 3 Select the AUDIO IN function. Press AUDIO IN. 4 Start playing the connected component. 5 Adjust the volume. Press VOLUME +/ (or VOL +/ on the unit). Adjusting the sound To add a sound effect To Press Generate a DSGX on the unit. more dynamic sound (Dynamic Sound Generator X-tra) Set the sound EQ repeatedly effect to select BASS or TREBLE, and then press +/ repeatedly to adjust the level. 20 GB

21 Changing the display To Change information on the display 1)2) Check the clock when the system is off Press DISPLAY repeatedly when the system is on. DISPLAY when the system is off 3). The clock is displayed for 8 seconds. 1) For example, you can view CD/MP3 disc information, such as; track or file number during normal play. track or file name ( ) during normal play. artist name ( ) during normal play. album or folder name ( ) during normal play. total playing time while the player is stopped. 2) When the system and a Bluetooth device are connected using the Bluetooth function, you can view the Bluetooth device address. If the connected Bluetooth device supports metadata transfer, you can also view the Bluetooth device information, such as the elapsed playing time, track title, artist name or album name during playback. 3) The STANDBY indicator on the unit lights up when the system is off. Notes on the display information Characters that cannot be displayed appear as _. The following are not displayed: total playing time for a CD-DA disc depending on the play mode. total playing time and remaining playing time for an MP3 disc. The following is not displayed correctly: folder and file names that do not follow either the ISO9660 Level 1, Level 2 or Joliet in the expansion format. The following is displayed: ID3 tag information for MP3 files when ID3 version 1 and version 2 tags are used (up to 62 characters for an MP3 disc). The display information may not be updated or displayed properly depending on the Bluetooth device you are using. The display information may differ depending on the connected Bluetooth device. The display information for the Bluetooth device may not be updated properly depending on the communication environment or surrounding conditions. Basic Operations 21 GB

22 Other Operations Creating your own program (Program Play) 1 Select the desired function. Press CD to select the CD function. 2 Press PLAY MODE repeatedly until PGM appears while the system is stopped. 3 Press / repeatedly until the desired track or file number appears. When programming files, press +/ repeatedly to select the desired folder, and then select the desired file. Example: When programming tracks on a CD 4 Press ENTER to add the track or file to the program.. appears when the total program time exceeds 100 minutes for a CD, or when you select a CD track whose number is 21 or over, or when you select an MP3 file. 5 Repeat steps 3 through 4 to program additional tracks or files, up to a total of 25 tracks or files. 6 To play your program of tracks or files, press. The program remains available until you open the disc tray. To play the same program again, press. To cancel Program Play Press PLAY MODE repeatedly until PGM disappears while the system is stopped. To delete the last track or file of the program Press CLEAR while the system is stopped. Selected track or file number Total playing time of program (including selected track or file) 22 GB

23 Presetting radio stations You can preset your favorite radio stations and tune them in instantly by selecting the corresponding preset number. Use buttons on the remote to preset stations. 1 Tune in the desired station (see Listening to the radio (page 13)). 2 Press TUNER MEMORY. 6 To call up a preset radio station, press TUNING MODE repeatedly until PRESET appears, and then press +/ repeatedly to select the desired preset number. Other Operations Preset number 3 Press +/ repeatedly to select your desired preset number. If another station is already assigned to the selected preset number, the station is replaced by the new stations. 4 Press ENTER. 5 Repeat steps 1 through 4 to store other stations. You can preset up to 20 FM and 10 AM stations. The preset stations are retained for about half a day even if you disconnect the power cord or if a power failure occurs. 23 GB

24 24 GB Using the Timers The system offers two timer functions. If you use the Play Timer with the Sleep Timer, the Sleep Timer has priority. Sleep Timer: You can fall asleep to music. This function works even if the clock is not set. Press SLEEP repeatedly. If you select AUTO, the system automatically turns off after the current disc stops or in 100 minutes. Play Timer: You can wake up to CD or tuner at a preset time. Use buttons on the remote to control the Play Timer. Make sure you have set the clock. 1 Prepare the sound source. Prepare the sound source, and then press VOLUME +/ to adjust the volume. To start from a specific track or file, create your own program (page 22). 2 Press CLOCK/TIMER SET. 3 Press / repeatedly to select PLAY SET?, and then press ENTER. ON TIME appears, and the hour indication flashes. 4 Set the time to start playing. Press / repeatedly to set the hour, and then press ENTER. The minute indication flashes. Use the procedure above to set the minutes. 5 Use the same procedure as in step 4 to set the time to stop playing. 6 Select the sound source. Press / repeatedly until the desired sound source appears, and then press ENTER. The display shows the timer settings. 7 Press / to turn off the system. The system turns on 15 seconds before the preset time. If the system is on at the preset time, the Play Timer will not play. Note Before the system is turned off, if a connection is made with the Bluetooth headphones, sounds played by the Play Timer may be output to the Bluetooth headphones. To activate or check the timer again Press CLOCK/TIMER SELECT, press / repeatedly until PLAY SEL? appears, and then press ENTER. To cancel the timer Repeat the same procedure as above until TIMER OFF? appears, and then press ENTER. To change the setting Start over from step 1. Tip The Play Timer setting remains as long as the setting is not canceled manually.

25 Others Troubleshooting 1 Make sure the power cord and speaker cords are correctly and firmly connected. 2 Find your problem in the checklist below, and take the indicated corrective action. If the issue persists, contact your nearest Sony dealer. If the STANDBY indicator flashes Immediately unplug the power cord, and check the following items. If your system has a voltage selector, is the voltage selector set to the correct voltage? Are you using only the supplied speakers? Is anything blocking the ventilation holes on the top or back of the system? After the STANDBY indicator stops flashing, reconnect the power cord, and turn on the system. If the issue persists, contact your nearest Sony dealer. Severe hum or noise. Move the system away from sources of noise. Connect the system to a different wall socket. Install a noise filter (available separately) to the power cord. There is no sound. If the BLUETOOTH indicator is lit or flashing when a function other than the Bluetooth function is selected, no sound is heard through the speakers or PHONES jack. Press and hold BLUETOOTH for about 2 seconds until the BLUETOOTH indicator turns off. The remote does not function. Remove any obstacles between the remote and the remote sensor on the unit, and position the unit away from fluorescent lights. Point the remote at the system s sensor. Move the remote closer to the system. The STANDBY indicator remains lit after unplugging the power cord. The STANDBY indicator may not turn off immediately after unplugging the power cord. This is not a malfunction. The indicator will turn off after about 40 seconds. Others General Sound comes from one channel, or the left and right volumes are unbalanced. Place the speakers as symmetrically as possible. Connect only the supplied speakers. Continued 25 GB

26 CD/MP3 player The sound skips, or the disc will not play. Wipe the disc clean, and replace it. Move the system to a location away from vibration (for example, on top of a stable stand). Move the speakers away from the system, or place them on separate stands. At high volume, speaker vibration may cause the sound to skip. Play does not start from the first track. Press PLAY MODE repeatedly until both PGM and SHUF disappear to return to normal play. Starting playback takes more time than usual. The following discs take a longer time to start playback. a disc recorded with a complicated tree structure. a disc recorded in multisession mode. a disc that has not been finalized (a disc to which data can be added). a disc that has many folders. Bluetooth device Pairing cannot be done. Move the Bluetooth device closer to the system. Pairing may not be possible if other Bluetooth devices are present around the system. In this case, turn off the other Bluetooth devices. Enter the same passkey that was entered at the Bluetooth device correctly. Connection is not possible. The Bluetooth device you attempted to connect does not support the A2DP profile, and cannot be connected with the system. Enable the Bluetooth function of the Bluetooth device. Establish a connection from the Bluetooth device. The pairing registration information has been erased. Perform the pairing operation again. While connected to a Bluetooth device, this system cannot be detected and a connection cannot be established from another Bluetooth device. Erase the pairing registration information of a Bluetooth device and perform the pairing operation again. 26 GB

27 The sound skips or fluctuates, or the connection is lost. The system and the Bluetooth device are too far apart. If there are obstacles between the system and your Bluetooth device, remove or avoid the obstacles. If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other Bluetooth device, or a microwave oven nearby, move them away. The sound of your Bluetooth device cannot be heard on this system. Turn up the volume on your Bluetooth device first, and then adjust the volume using VOLUME +/ (or VOL +/ on the unit). Severe hum or noise If there are obstacles between the system and your Bluetooth device, remove or avoid the obstacles. If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other Bluetooth device, or a microwave oven nearby, move them away. Turn down the volume of the connected Bluetooth device. The sound from the Bluetooth headphones is distorted. Turn down the volume of the system using VOLUME (or VOL on the unit). If your headphones have a volume control, also adjust the volume using the headphone s volume control. Press DSGX on the unit repeatedly until DSGX OFF appears. Press EQ repeatedly to select BASS or TREBLE, and then press repeatedly to turn down the level. Tuner Severe hum or noise, or stations cannot be received. ( TUNED or STEREO flashes on the display.) Connect the antenna properly. Find a location and an orientation that provide good reception, and then set up the antenna again. Keep the antennas away from the speaker cords and the power cord to avoid picking up noise. Connect a commercially available external antenna. Consult your nearest Sony dealer if the supplied AM antenna has come off the plastic stand. Turn off nearby electrical equipment. To change the AM tuning interval The AM tuning interval is factory-preset to 9 khz (or 10 khz, for some areas). Use buttons on the unit to change the AM tuning interval. 1 Tune in any AM station, and then turn off the system. 2 While holding down ENTER, press /. All the AM preset stations are erased. To reset the interval to the factory preset, repeat the procedure. Others Continued 27 GB

28 To improve tuner reception Turn off CD player power by using the CD power management function. By default, CD power is turned on. 1 Press CD to select the CD function, and then turn off the system. 2 After STANDBY stops flashing, press / on the unit while holding down on the unit. CD POWER OFF appears. With CD player power turned off, disc access time is increased. To turn on CD player power, repeat the procedure until CD POWER ON appears. To reset the system to factory settings If the system still does not operate properly, reset the system to factory settings. Use buttons on the unit to reset the system to its factory default settings. 1 Disconnect and reconnect the power cord, and then turn on the system. 2 Press, VOL + and / at the same time. All user-configured settings, such as preset radio stations, timer, and the clock, are deleted. Messages CD/MP3 player, Tuner CD Over: You have reached the end of the disc while pressing during playback or pause. Complete!: The preset operation ended normally. LOCKED: The disc tray does not open. Contact your nearest Sony dealer. No Disc: There is no disc in the system, or you have loaded a disc that cannot be played. No Step: All of the programmed tracks or files have been erased. Push SELECT!: You tried to set the clock or timer during timer operation. Push STOP!: You pressed PLAY MODE during playback. Reading: The system is reading information of the disc. Some buttons are not available. SET CLOCK!: You tried to select the timer when the clock is not set. SET TIMER!: You tried to select the timer when the Play Timer is not set. Step Full!: You tried to program more than 26 tracks or files (steps). TIME NG!: The Play Timer start and end times are set to the same time. 28 GB

29 Bluetooth device Connect: Bluetooth communication was established. Connecting: The system is attempting to connect with recently connected Bluetooth devices. Disconnect: Communication with a Bluetooth device was cut off for some reason, or Bluetooth communication was ended. No Device: A pairable Bluetooth device was not found, or connection was not possible. Not in Use: The system is not connected with a Bluetooth device using A2DP, or the Bluetooth device does not support a command for selecting a folder operations ( +/ ). PIN?: The system is asking for the passkey. For details, see Using the Bluetooth function (page 14). Please Wait: The system is readying for usage of a Bluetooth device. Precautions Discs that this system CAN play Audio CD CD-R/CD-RW (audio data/mp3 files) Discs that this system CANNOT play CD-ROM CD-R/CD-RW other than those recorded in music CD format or MP3 format conforming to ISO9660 Level 1/Level 2, Joliet or multisession CD-R/CD-RW recorded in multisession that have not ended by closing the session CD-R/CD-RW of poor recording quality, CD-R/CD-RW that have scratches or are dirty, or CD-R/CD- RW recorded with an incompatible recording device CD-R/CD-RW which is finalized incorrectly Discs containing files other than MPEG 1 Audio Layer-3 (MP3) files Discs of non-standard shape (for example, heart, square, star) Discs that have adhesive tape, paper, or sticker attached to them Rental or used discs with attached seals where the glue extends beyond the seal Discs that have labels printed using ink that feels tacky when touched Others Continued 29 GB

30 Notes on discs Before playing, wipe the disc with a cleaning cloth from the center out to the edge. Do not clean discs with solvents, such as benzine thinner, or commercially available cleaners or anti-static spray intended for vinyl LPs. Do not expose discs to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight. On safety Completely disconnect the power cord (mains lead) from the wall socket (mains) if it is not going to be used for an extended period of time. When unplugging the unit, always grip the plug. Never pull the cord itself. Should any solid object or liquid get into the system, unplug the system, and have it checked by qualified personnel before operating it again. The AC power cord can be changed only by a qualified service facility. On placement Do not place the system in an inclined position or in locations that are extremely hot, cold, dusty, dirty, or humid or lacking adequate ventilation, or subject to vibration, direct sunlight or a bright light. Be careful when placing the unit or speakers on surfaces that have been specially treated (for example, with wax, oil, polish) as staining or discoloration of the surface may result. If the system is brought directly from a cold to a warm location or is placed in a very damp room, moisture may condense on the lens inside the CD player, and cause the system to malfunction. In this situation, remove the disc, and leave the system turned on for about an hour until the moisture evaporates. On heat buildup Heat buildup on the unit during operation is normal and is not cause for alarm. Do not touch the cabinet if it has been used continuously at a high volume because the cabinet may have become hot. Do not obstruct the ventilation holes. On the speaker system This speaker system is not magnetically shielded, and the picture on nearby TV sets may become magnetically distorted. In this situation, turn off the TV, wait 15 to 30 minutes, and turn it back on. If there is no improvement, move the speakers far away from the TV. Cleaning the cabinet Clean this system with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as thinner, benzine, or alcohol. 30 GB

31 Specifications Main unit Amplifier section DIN power output (rated): watts (6 ohms at 1 khz, DIN) Continuous RMS power output (reference): watts (6 ohms at 1 khz, 10% THD) Inputs: AUDIO IN (stereo mini jack): impedance 47 kilohms Outputs: PHONES (stereo mini jack): accepts headphones of 8 ohms or more SPEAKER: accepts impedance of 6 ohms Bluetooth section Communication system: Bluetooth Standard version 2.0 Output: Bluetooth Standard Power Class 2 Maximum communication range: Line of sight approx. 10 m 1) Frequency band: 2.4 GHz band ( GHz GHz) Modulation method: FHSS Compatible Bluetooth profiles 2) : A2DP (Advanced Audio Distribution Profile) AVRCP (Audio Video Remote Control Profile) Supported codecs: Receive: SBC (Sub Band Codec), MP3 Transmit: SBC (Sub Band Codec) 1) The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, antenna s performance, operating system, software application, etc. 2) Bluetooth standard profiles indicate the purpose of Bluetooth communication between devices. CD player section System: Compact disc and digital audio system Laser Diode Properties Emission Duration: Continuous Laser Output*: Less than 44.6µW * This output is the value measurement at a distance of 200mm from the objective lens surface on the Optical Pick-up Block with 7mm aperture. Tuner section FM stereo, FM/AM superheterodyne tuner FM tuner section: Tuning range: MHz (50 khz step) Antenna: FM lead antenna Antenna terminals: 75 ohms unbalanced Intermediate frequency: 10.7 MHz AM tuner section: Tuning range: 531 1,602 khz (with 9 khz tuning interval) 530 1,610 khz (with 10 khz tuning interval) Antenna: AM loop antenna, external antenna terminal Intermediate frequency: 450 khz Others Continued 31 GB

32 Speaker Speaker system: Full-range, bass-reflex, 10 cm, cone type Rated impedance: 6 ohms Dimensions (w/h/d): Approx mm Mass: Approx. 1.9 kg General Power requirements: 220 V AC, 50/60 Hz Power consumption: 56 watts Dimensions (w/h/d) (excl. speakers): Approx mm Mass (excl. speakers): Approx. 3.9 kg Supplied accessories: Remote Commander (1), R6 (Size AA) batteries (2), AM loop antenna (1), FM lead antenna (1) Design and specifications are subject to change without notice. Standby power consumption: 0.5 W Halogenated flame retardants are not used in the certain printed wiring boards. Halogenated flame retardants are not used in cabinets. Please contact the following to obtain customer support for this system. Sony China Customer Support Center TEL: Bluetooth wireless technology Bluetooth wireless technology is a shortrange wireless technology linking digital devices, such as personal computers and digital still cameras. Using the Bluetooth wireless technology, you can operate the units involved within a range of about 10 meters. The Bluetooth wireless technology is commonly used between two devices, but a single device can be connected to multiple devices. You do not need wires to get connected as you do with a USB connection, and you do not need to place the devices face to face as you do with wireless infrared technology. You can use the technology with one Bluetooth device in your bag or pocket. Bluetooth wireless technology is a global standard supported by thousands of companies. These companies produce products that meet the global standard. Supported Bluetooth version and profiles Profile refers to a standard set of capabilities for various Bluetooth product capabilities. This system supports the following Bluetooth version and profiles. Supported Bluetooth version: Bluetooth Standard version 2.0 Supported Bluetooth profiles: A2DP (Advanced Audio Distribution Profile) AVRCP (Audio Video Remote Control Profile) 32 GB

33 Effective communication range Bluetooth devices should be used within approximately 10 meters (unobstructed distance) of each other. The effective communication range may become shorter under the following conditions. When a person, metal object, wall or other obstruction is between the devices with a Bluetooth connection Locations where a wireless LAN is installed Around microwave ovens that are in use Locations where other electromagnetic waves occur Effects of other devices Bluetooth devices and wireless LAN (IEEE b/g) use the same frequency band (2.4 GHz). When using your Bluetooth device near a device with wireless LAN capability, electromagnetic interference may occur. This could result in lower data transfer rates, noise, or inability to connect. If this happens, try the following remedies: Try connecting this system and Bluetooth mobile phone or Bluetooth device when you are at least 10 meters away from the wireless LAN equipment. Turn off the power to the wireless LAN equipment when using your Bluetooth device within 10 meters. Effects on other devices The radio waves broadcast by this system may interfere with the operation of some medical devices. Since this interference may result in malfunction, always turn off the power on this system, Bluetooth mobile phone and Bluetooth device in the following locations: In hospitals, on trains, in airplanes, at gas stations, and any place where flammable gasses may be present Near automatic doors or fire alarms Notes This system supports security functions that comply with the Bluetooth specification as a means of ensuring security during communication using Bluetooth technology. However, this security may be insufficient depending on the setting contents and other factors, so always be careful when performing communication using Bluetooth technology. Sony cannot be held liable in any way for damages or other loss resulting from information leaks during communication using Bluetooth technology. Bluetooth communication is not necessarily guaranteed with all Bluetooth devices that have the same profile as this system. Bluetooth devices connected with this system must comply with the Bluetooth specification prescribed by the Bluetooth SIG, Inc., and must be certified to comply. However, even when a device complies with the Bluetooth specification, there may be cases where the characteristics or specifications of the Bluetooth device make it impossible to connect, or may result in different control methods, display or operation. Noise may occur or the audio may cut off depending on the Bluetooth device connected with this system, the communications environment, or surrounding conditions. Others 33 GB

34 注意 为了减少火灾危险, 请勿用报纸 桌布 窗帘等覆盖本装置的通风口 请勿将明火源 ( 如点燃的蜡烛 ) 放在本装置上 为了减少火灾或触电的危险, 请勿将本装置暴露于滴水或溅水中, 并不要把装有液体的物品 ( 如花瓶 ) 放在本装置上 由于电源插头用于断开主机与电源的连接, 请将主机连接到容易插拔的交流电源插座上 如果发现主机发生异常, 请立即将电源插头从交流电源插座上拔下 请勿将本机安放在书橱或壁橱等狭窄封闭处 请勿将电池或装有电池的装置暴露在阳光 火焰或类似的过热热源附近 有触电危险严禁拆开内部无操作者可修理元件, 维修请咨询具备资格人士 为防止触电严禁拆开机壳, 维修请咨询具备资格人士 仅限室内使用 警告与光学仪器一起使用本产品将会增加眼睛受伤的危险 美国和加拿大的用户除外 本装置属于 1 类激光 (CLASS 1 LASER) 产品 本标签位于背面外壳上 标明附件中所规定的技术指标和使用范围, 说明所有控制 调整及开关等使用方法 ; 使用频率 : MHz 等效全向辐射功率 (EIRP): 20 dbm 最大功率谱密度 : 20 dbm/mhz(eirp) 载频容限 :20 ppm 不得擅自更改发射频率 加大发射功率 ( 包括额外加装射频功率放大器 ), 不得擅自外接天线或改用其它发射天线 ; 使用时不得对各种合法的无线电通信业务产生有害干扰 ; 一旦发现有干扰现象时, 应立即停止使用, 并采取措施消除干扰后方可继续使用 ; 使用微功率无线电设备, 必须忍受各种无线电业务的干扰或工业 科学及医疗应用设备的辐射干扰 ; 不得在飞机和机场附近使用 有关 DualDisc 的注意事项 DualDisc 是一种双面光盘产品, 它一面含有符合录制 DVD 的素材, 另一面为数字音频素材 但是, 由于音频素材一面不符合 Compact Disc(CD) 标准, 无法保证在本产品上播放 用版权保护技术编码的音乐光盘本产品被设计用于播放符合 Compact Disc(CD) 标准的光盘 近来, 一些唱片公司在出售各种用版权保护技术编码的音乐光盘 请注意, 这些光盘中有一些光盘不符合 CD 标准而可能无法用本产品播放 Bluetooth 字标和标志属于 Bluetooth SIG, Inc.,Sony Corporation 使用此类标志均取得许可 其它商标和品牌名称均属于各自所有者 MPEG Layer-3 音频编码技术和专利由 Fraunhofer IIS 和 Thomson 授权 CS

35 目录 部件和控制指南... 4 显示窗中的信息... 8 使用前的准备工作 牢固地连接系统... 9 设定时钟 其它 故障排除 讯息 使用须知 规格 Bluetooth 无线技术 基本操作 播放 CD/MP3 光盘 收听广播 使用 Bluetooth 功能 使用选购音频组件 调节声音 改变显示 其它操作 创建您自己的程序 ( 编程播放 ) 预设广播电台 使用定时器 CS CS

36 部件和控制指南 本手册主要说明使用遥控器的操作, 但使用主机上具有相同或相似名称的按钮也可以进行相同的操作 主机前面板 上面板 CS

37 遥控器 BLUETOOTH 按钮 ( 第 页 ) 按下进行连接 断开连接或与 Bluetooth 设备配对 BLUETOOTH 指示灯 ( 第 页 ) 当 Bluetooth 功能工作时点亮 ( 打开 / 关闭 ) 按钮 ( 第 12 页 ) 按下以打开或关闭光盘托盘 部件和控制指南 /( 电源 ) 按钮 ( 第 页 ) 按下打开系统电源 STANDBY 指示灯 ( 第 页 ) 当系统电源关闭时点亮 遥控传感器 ( 第 25 页 ) AUDIO IN 插孔 ( 第 20 页 ) 连接至选购音频组件 PHONES 插孔 连接耳机 播放按钮和功能按钮 主机 :BLUETOOTH ( 播放 / 暂停 ) 按钮 ( 第 页 ) 按下以选择 Bluetooth 功能 按下以开始或暂停 Bluetooth 设备 (Bluetooth 移动电话等 ) 上的音乐播放 接下页 CS

38 主机 :CD ( 播放 / 暂停 ) 按钮 ( 第 12 页 ) 按下以选择 CD 功能 按下以开始或暂停光盘播放 遥控器 :CD 按钮 ( 第 12 页 ) 按下以选择 CD 功能 遥控器 :( 播放 ) 按钮,( 暂停 ) 按钮按下以开始或暂停播放 TUNER/BAND 按钮 ( 第 13 页 ) 按下以选择 TUNER 功能 按下以选择 FM 或 AM 接收模式 AUDIO IN 按钮 ( 第 20 页 ) 按下以选择 AUDIO IN 功能 FUNCTION 按钮 ( 第 页 ) 按下以选择功能 REPEAT/FM MODE 按钮 ( 第 页 ) 按下以反复收听光盘 单个曲目或文件 按下以选择 FM 接收模式 ( 单声道或立体声 ) PLAY MODE/TUNING MODE 按钮 ( 第 页 ) 按下以选择 CD 或 MP3 光盘播放模式 按下以选择调谐模式 ENTER 按钮 ( 第 页 ) 按下以输入设置 /( 后退 / 前进 ) 按钮 ( 第 页 ) 按下以选择曲目或文件 主机 :TUNE +/( 调谐 ) 按钮 ( 第 13 页 ) 遥控器 :+/( 调谐 ) 按钮 ( 第 页 ) 按下以调入想要的电台 +/( 选择文件夹 ) 按钮 ( 第 页 ) 按下以选择文件夹 /( 快倒 / 快进 ) 按钮 ( 第 页 ) 按下以找到曲目或文件中的一点 主机 :VOL +/ 按钮 ( 第 页 ) 遥控器 :VOLUME +/ 按钮 ( 第 页 ) 按下以调节音量 CS

39 DISPLAY 按钮 ( 第 页 ) 按下以改变显示窗上的信息 声音按钮 ( 第 20 页 ) 主机 :DSGX 按钮遥控器 :EQ 按钮 按下以选择声音效果 主机 :/CANCEL( 停止 / 取消 ) 按钮 ( 第 页 ) 遥控器 :( 停止 ) 按钮 ( 第 页 ) 按下以停止播放 CLEAR 按钮 ( 第 页 ) 按下以删除预先编程的曲目或文件 按下以消除 Bluetooth 设备的配对注册信息 TUNER MEMORY 按钮 ( 第 23 页 ) 按下以预设广播电台 SLEEP 按钮 ( 第 24 页 ) 按下以设置入睡定时器 部件和控制指南 CLOCK/TIMER SELECT 按钮 ( 第 24 页 ) CLOCK/TIMER SET 按钮 ( 第 页 ) 按下以设置时钟和播放定时器 电池舱盖 ( 第 10 页 ) CS

40 显示窗中的信息 功能 音频格式 播放模式 ( 第 12 页 ) 调谐器接收模式 ( 第 13 页 ) 调谐器接收状态 ( 第 13 页 ) DSGX( 第 20 页 ) 定时器 ( 第 24 页 ) 播放 / 暂停 文本信息 CS

41 使用前的准备工作 牢固地连接系统 使用前的准备工作 右扬声器 或 左扬声器 墙上电源插座 扬声器导线 ( 红色 /) 扬声器导线 ( 黑色 /) AM 环形天线 FM 导线天线 ( 将其水平延伸 ) 白色侧用于北美机型 褐色侧用于其它地区 接下页 CS