Product Specification Chip Intel DSL6540 Thunderbolt 3 Controller Connectors 2 x Thunderbolt 3 ports (Thunderbolt 3 Port 1/Thunderbolt 3 Port 2), supp

Size: px

Start display at page:

Download "Product Specification Chip Intel DSL6540 Thunderbolt 3 Controller Connectors 2 x Thunderbolt 3 ports (Thunderbolt 3 Port 1/Thunderbolt 3 Port 2), supp"

靡符杜
5 years ago
Views:

1 GC-ALPINE RIDGE Installation Guide/ 12WE6-ALPINER-10AR

2 Product Specification Chip Intel DSL6540 Thunderbolt 3 Controller Connectors 2 x Thunderbolt 3 ports (Thunderbolt 3 Port 1/Thunderbolt 3 Port 2), supporting up to 40 Gbps bandwidth and a maximum display resolution of 4096x2304@60 Hz * Actual resolutions supported are dependent on the graphics card being used. 1 x HDMI port, supporting a maximum resolution of 4096x2160@24 Hz * Support for HDMI 1.4 version. 2 x Mini-DisplayPort In ports (DP IN 1/DP IN 2) * When both of the DP IN 1 and DP IN 2 connectors are connected to graphics cards, you can choose two of the HDMI connector, Thunderbolt 3 connector 1, and Thunderbolt 3 connector 2 to use. 1 x 5-pin J1 header, connecting to the motherboard THB_C header by the included THB_C header cable Interface PCIe 3.0 interface (PCIe x4) Data Transfer 40 Gbps Bi-directional per port Rate Supported Support for Windows 10/8.1 (64-bit)/Windows 7 (32-bit/64-bit) Operating Systems Compatible Go to GIGABYTE s website for the latest motherboard support list. Motherboards - 2 -

Installing the GIGABYTE GC-ALPINE RIDGE Add-in

Mini-DisplayPort In Port 2 (DP IN 2) PCIe x4

3 Installing the GIGABYTE GC-ALPINE RIDGE Add-in Card GC-ALPINE RIDGE Add-in Card Thunderbolt 3 Port 1 Thunderbolt 3 Port 2 J1 Header HDMI Port (HDMI) Mini-DisplayPort In Port 1 (DP IN 1) Mini-DisplayPort In Port 2 (DP IN 2) PCIe x4 Interface Mini-DisplayPort Cable x 2 THB_C Header Cable x 1-3 -

4 Step 1: Install the GC-ALPINE RIDGE add-in card in the PCIEX4 slot. Step 2: Connect one end of the THB_C header cable to the J1 header on the GC-ALPINE RIDGE add-in card. Step 3: Connect the other end of the cable to the THB_C (Note) header on the motherboard

5 (Note) The THB_C header cable provided has two connectors. Choose the correct connector according to the THB_C header on your motherboard Step 4: Follow the steps below to use the included Mini- DisplayPort cable to connect your graphics card to the GC-ALPINE RIDGE add-in card. 4-1: Connect the cable from the DisplayPort In connector on the GC-ALPINE RIDGE add-in card to the DisplayPort on your graphics card. 4-2: Connect the Thunderbolt device s or DisplayPort/ HDMI monitor s cable to the Thunderbolt 3 connector on the GC-ALPINE RIDGE add-in card. When connecting DisplayPort/HDMI monitor(s), if you connect the Mini- DisplayPort cable to the DP IN 1 connector, you must connect the monitor s cable to the HDMI connector or Thunderbolt 3 connector 1. If you connect the cable to the DP IN 2 connector, you must connect the monitor s cable to Thunderbolt 3 connector 2. When both of the DP IN 1 and DP IN 2 connectors are connected, you can choose two of the HDMI connector, Thunderbolt 3 connector 1, and Thunderbolt 3 connector 2 to use. Make sure to update the motherboard BIOS to the latest version

6 Daisy-chaining Thunderbolt Enabled Devices Refer to the following for connecting Thunderbolt -enabled devices in a daisy-chaining configuration. The following are single-port configurations. (Make sure the Thunderbolt -enabled devices to be daisy-chained have both Thunderbolt in and out ports.) Six Thunderbolt devices Six Thunderbolt devices and one native DisplayPort monitor (A graphics card with DisplayPort is required) Six Thunderbolt devices and three DisplayPort 1.2 monitors (A graphics card with DisplayPort 1.2 support is required) - 6 -

7 Installing the Driver After the computer starts, install the driver for the GC-ALPINE RIDGE add-in card. Insert the included driver disk and follow the on-screen instructions to install the driver. Please visit GIGABYTE s global website ( and click on Support & Downloads for the latest software driver

8 Intel DSL6540 Thunderbolt 3 2 Thunderbolt 3 (Thunderbolt 3 1/Thunderbolt 3 2) 40 Gbps 4096x2304@60 Hz * 1 HDMI 4096x2160@24 Hz * HDMI Mini-DisplayPort (DP IN 1/DP IN 2) * DP IN 1/DP IN 2 HDMI Thunderbolt 3 1 Thunderbolt pin J1 THB_C THB_C PCIe 3.0 (PCIe x4) 40 Gbps Windows 10/8.1(64-bit)/Windows 7(32-bit/64-bit) - 8 -

9 GC-ALPINE RIDGE GC-ALPINE RIDGE Thunderbolt 3 1 Thunderbolt 3 2 J1 HDMI (HDMI) Mini-DisplayPort In 1 (DP IN 1) Mini-DisplayPort In 2 (DP IN 2) PCIe x4 Mini-DisplayPort -2 THB_C

10 1 GC-ALPINE RIDGE PCIEX4 2 THB_C GC-ALPINE RIDGE J1 3 THB_C ( ) THB_C

( ) THB_C THB_C 4-2 4 Mini-DisplayPort GC-ALPINE RIDGE 4-1 GC-ALPINE RIDGE

DisplayPort/ HDMI 4-1 DisplayPort HDMI DP IN 1 HDMI Thunderbolt 3 1 DP IN 2

11 ( ) THB_C THB_C Mini-DisplayPort GC-ALPINE RIDGE 4-1 GC-ALPINE RIDGE Mini-DisplayPort In DisplayPort 4-2 GC-ALPINE RIDGE Thunderbolt 3 Thunderbolt DisplayPort/ HDMI 4-1 DisplayPort HDMI DP IN 1 HDMI Thunderbolt 3 1 DP IN 2 Thunderbolt 3 2 DP IN 1 DP IN 2 HDMI Thunderbolt 3 1 Thunderbolt 3 2( ) BIOS

12 Thunderbolt Thunderbolt ( Thunderbolt ) 6 Thunderbolt 6 Thunderbolt 1 DisplayPort ( DisplayPort ) 6 Thunderbolt 3 DisplayPort 1.2 ( DisplayPort 1.2 )

13 GC-ALPINE RIDGE (

14 FCC Notice (U.S.A. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult a dealer or experienced TV/radio technician for help. Canada, Industry Canada (IC) Notices / Canada, avis d'industry Canada (IC) This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter son fonctionnement

15 PCIe add in card GC-ALPINE RIDGE Jul. 29, 2016

16 PCIe add-in card GC-ALPINE RIDGE Jul. 29, 2016

Product Specification Chip Connectors Interface Data Transfer Rate Intel DSL5520 Thunderbolt 2 Controller 2 x Thunderbolt 2 ports (TBT 1/TBT 2), suppo

GC-Thunderbolt 2 Installation Guide/ 12WE6-TH2-10AR Product Specification Chip Connectors Interface Data Transfer Rate Intel DSL5520 Thunderbolt 2 Controller 2 x Thunderbolt 2 ports (TBT 1/TBT 2), supporting