Template-A5

Size: px

Start display at page:

Download "Template-A5"

娌冯
7 years ago
Views:

1 HD4738 HD4733 HD4728 HD4723

3 1 A X M B C N O D P E F G I H J Q R S T K L U HD4728/HD4723

5 English 6 简体中文 12 HD4738 HD4733 HD4728 HD4723

6 6 English Introduction Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers register your product at General description (Fig. 1) A Steam tray B Water level indication C Inner pot D Steam vent E Function selection switch (HD4738/HD4733 only) F Release lever G Rice light (HD4738/HD4733 only) H Warm light (HD4738/HD4733 only) I Congee light (HD4738/HD4733 only) J Control lever K Cook light (HD4728/HD4723 only) L Warm light (HD4728/HD4723 only) M Rice scoop N Measuring cup O Lid P Detachable steam vent cap Q Rice cooker handle R Scoop holder S Main body T Heating element U Mains cord connection Important Read these instructions for use carefully before using the appliance and save them for future reference. Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance. Only connect the appliance to an earthed wall socket. Always ensure the plug is inserted firmly into the wall socket. If the mains cord is damaged it must be replaced by Philips a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. Never use any accessories or parts from other manufacturers or which have not been specifically advised by Philips. Your guarantee will become invalid if such accessories or parts have been used. Only use the rice scoop provided. Avoid using sharp utensils. Never immerse the housing of the rice cooker in water nor rinse it under the tap. Do not expose the rice cooker to high temperatures nor place it onto a working or still hot stove or cooker. Make sure the heating element the magnetic switch and the outside of the inner pot are clean and dry before switching the rice cooker on. Do not switch the rice cooker on without having inserted the inner pot. Always unplug the rice cooker and let it cool down before cleaning it. Do not place the inner pot directly over an open fire to cook rice. Do not cover the steam vent while the rice cooker is operating. Do not let the mains cord hang over the edge of the table or worktop on which the appliance is standing.

7 English This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. This appliance is intended for household use only. If the appliance is used improperly or for professional or semiprofessional purposes or if it is used in a way that is not in accordance with the instructions for use the guarantee will become invalid and Philips will not accept liability for any damage caused. Place the rice cooker on a stable horizontal and level surface. The accessible surfaces may become hot when the appliance is operating. Do not plug the appliance in or switch on the mains with wet hands. Beware of hot steam coming out of the steam vent during cooking or out of the rice cooker when you open the lid. Do not lift and move the rice cooker by its handle while it is operating. Always unplug the appliance after use. Electromagnetic fields (EMF) This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual the appliance is safe to use based on scientific evidence available today. Before first use Remove the sheet between the inner pot and the heating element. 1 Clean the parts of the rice cooker thoroughly before using the appliance for the first time (see chapter Cleaning ). Make sure all parts are completely dry before you start using the appliance. 2 Attach the scoop holder to the body of the rice cooker (Fig. 2). Using the appliance Cooking rice 1 Measure the rice using the measuring cup provided. Each cup of uncooked rice normally gives 2 bowls of cooked rice. Do not exceed the quantities indicated on the inside of the inner pot. 1 cup of rice is approx. 180ml. Quantity for rice cooking: Menu Volume/L Quantity of rice (cups) Volume/L White rice Congee (HD4738/ HD4733 only) Quantity of rice (cups) 2 Wash the rice thoroughly. Use a separate container to wash the rice to avoid damaging the non-stick coating of the inner pot. 3 Put the pre-washed rice in the inner pot.

8 8 English 4 Add water to the level indicated on the scale inside the inner pot that corresponds to the number of cups of rice used. Then smooth the rice surface. For instance if you cook 4 cups of rice add water up to the 4-cup level indicated on the scale. HD4738 (Fig. 3) HD4733 (Fig. 4) HD4728 (Fig. 5) HD4723 (Fig. 6) Note: The level marked inside the inner pot is just an indication; you can always adjust the water level for different types of rice and your own preference. 5 Press the release lever to open the lid. 6 Put the inner pot in the rice cooker. Check if the inner pot is in proper contact with the heating element (Fig. 7). Make sure that the outside of the inner pot is dry and clean and that there is no foreign residue on the heating element or the magnetic switch. 7 Close the lid of the rice cooker put the plug in the wall socket and switch on the mains. HD4728/HD4723: The cook light goes on to indicate that the appliance is on. (Fig. 8) 8 HD4738/HD4733: Set the function selection switch to RICE (Fig. 9). HD4738/HD4733: The rice light goes on (Fig. 10). 9 Press the control lever down to start the cooking process (Fig. 11). If you fail to press down the control lever the rice cooker will automatically switch to the keepwarm mode. The cook light/rice light goes out and the warm light goes on. When the cooking process is finished the cook light/rice light goes out and the warm light goes on to indicate that the rice cooker has automatically switched to the keep-warm mode (Fig. 12). 10 Open the lid and stir the rice to loosen it (Fig. 13). For the best results do this just after the rice cooker has switched to keep-warm mode. Then close the lid firmly. Stirring the rice allows excess steam to escape. This will give fluffier rice. 11 To end the cooking process or keep-warm mode pull up the control lever switch off the mains and remove the mains plug from the wall socket (Fig. 14). Cooking congee (HD4738/HD4733 only) 1 Follow steps 1 to 7 in section Cooking rice. Do not exceed the volume indicated in the table for congee cooking as this may cause the rice cooker to overflow. 2 Set the function selection switch to CONGEE (Fig. 15). The congee light goes on (Fig. 16). 3 Press the control lever down to start the congee cooking process. (Fig. 17) Note: Tip: Stir the congee half-way through the cooking process. This will prevent congee from sticking to the pot. 4 To end the congee cooking process pull up the control lever switch off the mains and remove the mains plug from the wall socket (Fig. 18). At the end of the congee cooking process the rice cooker does not switch to the keep-warm mode. Do not leave the rice cooker switched on too long after the actual cooking process has finished as this will cause the congee to turn gluey.

9 English 9 Steaming 1 Measure 3 cups of water with the measuring cup and pour it into the inner pot. The amount of water varies according to the quantity of food being steamed. It will take approx. 8 minutes for 3 cups of water to come to the boil. 2 Put the food to be steamed on a plate or in the steam tray. To ensure even steaming the food should be spread out evenly and should not be piled up. 3 Put the steam tray in the inner pot. When you combine steaming and rice cooking make sure you measure out an amount of rice that leaves enough room for the steam tray. The steamed food will be ready when the rice cooking process is finished. 4 If you are using a separate plate put it in the steam tray. 5 Follow steps 7 to 10 in section Cooking rice. The cook light/rice light goes on and the steaming process starts. The steamed food will be ready when the rice cooking process is finished. 6 Open the lid and carefully remove the steamed food from the plate or steam tray. Use a kitchen glove or a cloth as the plate and the steam tray will be very hot. Beware of the hot steam. 7 To end the steaming pull up the control lever switch off the mains and remove the mains plug from the wall socket (Fig. 14). Keeping warm This mode allows you to keep your rice warm for a longer period of time. When the rice cooking process is finished the rice cooker automatically switches to the keep-warm mode. The cook light/rice light goes out and the keep-warm light goes on. We advise you to keep rice warm for not more than 12 hours so as to preserve its taste. The cook light/rice light may go on occasionally to indicate that the temperature inside the rice cooker has become too low and the heating element has switched on to heat up the rice cooker to the right keep-warm temperature. To end the keep-warm function pull up the control lever switch off the mains and remove the mains plug from the wall socket. The congee function does not have a keep warm mode. Cleaning Unplug the rice cooker before you start cleaning it. Wait until the rice cooker has cooled down sufficiently before cleaning it. To protect the non-stick coating of the inner pot do not: - use the inner pot for washing dishes; - put vinegar in the pot. 1 Take the steam tray and the inner pot out of the body of the appliance. 2 Detach the steam vent cap from the outer lid by pulling it upwards (Fig. 19) 3 To take the steam vent cap apart twist and turn to unlock (Fig. 20). 4 To reattach push the two halves onto each other and twist and turn to close. 5 To put the steam vent cap back into the vent hole of the outer lid insert it into the hole and push it down firmly (Fig. 21)

10 10 English 6 Clean the inner pot steam tray rice scoop and steam vent cap with a sponge or a cloth in hot water with some washing-up liquid. Do not use abrasive cleaning agents scourers or metal utensils to clean the inner pot as these will damage the non-stick coating. 7 Use only a damp cloth to wipe the inner lid and the outside and inside of the body of the rice cooker. Never immerse the body of the rice cooker in water nor rinse it under the tap. Wipe the heating element with a dry cloth. Environment Do not throw the appliance away with the normal household waste at the end of its life but hand it in at an official collection point for recycling. By doing this you will help to preserve the environment (Fig. 22). Guarantee & service If you need information or if you have a problem please visit the Philips website at or contact the Philips Customer Care Centre in your country (you will find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country turn to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV. Troubleshooting If the rice cooker does not function properly or if the cooking quality is insufficient consult the table below. If you are unable to solve the problem please contact the Philips Customer Care Centre in your country. Problem Cause Solution The cook light/rice light does not go on. The warm light does not go on when the cooking process is finished. The rice is not cooked. There is a connection problem. The light is defective. The light is defective. HD4738/4733: You have set the function selection switch to CONGEE. At the end of the congee cooking process the rice cooker does not switch to the keep-warm mode. Not enough water has been added. Check if the rice cooker is connected to the mains and if the plug is inserted firmly into the wall socket. Take the appliance to your Philips dealer or a service centre authorised by Philips. Take the appliance to your Philips dealer or a service centre authorised by Philips. Add water according to the scale on the inside of the inner pot (see chapter Using the appliance ).

11 English 11 Problem Cause Solution The rice is too hard or too soft. The rice is scorched. The rice cooker does not automatically switch to keepwarm mode. The cooking process has not started. The inner pot is not properly in contact with the heating element. The heating element is damaged. Not enough or too much water has been added. HD4738/HD4733 only: You have set the function selection slide to Congee. The rice has not been rinsed well. The temperature control is defective. HD4738/4733: You have set the function selection switch to CONGEE. At the end of the congee cooking process the rice cooker does not switch to the keep-warm mode. You have failed to press down the control lever to start the cooking process. Make sure that there is no foreign residue on the heating element. Take the appliance to your Philips dealer or a service centre authorised by Philips. Add water according to the scale on the inside of the inner pot (see chapter Using the appliance). See chapter Using the appliance. Rinse the rice until water runs clear. Take the appliance to your Philips dealer or a service centre authorised by Philips.

12 12 简体中文产品简介感谢您的惠顾欢迎光临飞利浦! 为了您能充分享受飞利浦提供的支持请注册您的产品网址为一般说明 ( 图 1) A 蒸气盘 B 水位标记 C 内胆 D 蒸汽孔 E 功能选择开关 ( 仅限 HD4738/HD4733) F 释放杆 G 煮米指示灯 ( 仅限 HD4738/HD4733) H 保温指示灯 ( 仅限 HD4738/HD4733) I 煮粥指示灯 ( 仅限 HD4738/HD4733) J 控制键 K 烹饪指示灯 ( 仅限 HD4728/HD4723) L 保温指示灯 ( 仅限 HD4728/HD4723) M 饭勺 N 量杯 O 盖子 P 可分离式蒸汽孔帽 Q 电饭煲把手 R 饭勺支架 S 煲身 T 加热元件 U 电源线连接注意事项使用本产品前请仔细阅读本使用说明书并妥善保管以备日后参考在将产品连接电源之前请先检查产品所标电压与当地的供电电压是否相符产品必须插入有接地的插座且务必确保其已稳固插入如果电源软线损坏为避免危险必须由制造厂或其维修部或厂方认可的专职人员来更换切勿使用其它制造商生产的或未经飞利浦特别推荐的零件或附件如果使用了此类附件或部件本产品的保修将会失效仅使用附送的饭勺不要使用尖锐的器具切勿将电饭煲主体浸入水中也不能在自来水龙头下冲洗切勿将电饭煲暴露在高温之下也不要将电饭煲放在正在工作或仍然发热的炉具或炊具上接通电饭煲电源之前确保加热元件限温器和内锅外侧是洁净干燥的装入内锅之前切勿接通电饭煲的电源清洁电饭煲之前必须先将插头拔掉并待其冷却

13 不要将内锅直接放在火上煮饭电饭煲正在工作时不要盖住其蒸汽孔不要将电源线悬挂在放置产品的桌子或工作台的边缘上本产品不打算由肢体不健全感觉或精神上有障碍或缺乏相关经验和知识的人 ( 包括儿童 ) 使用除非有负责他们安全的人对他们使用本产品进行监督或指导应照看好儿童确保他们不会玩耍这些产品本产品仅限于家用如果本产品使用不当用于专业或半专业用途或未按本使用说明书进行操作则本产品的保修将会失效并且对于因此而造成的损失飞利浦将不承担任何责任将电饭煲放在稳固平整且水平的表面上产品在使用时表面会变得很热切勿使用潮湿的手插入产品插头或打开产品电源小心煮饭期间从蒸汽孔排出的热蒸汽或在打开盖子时从电饭煲中冒出的热蒸汽煮饭期间切勿提起及移动电饭煲使用后务必拔下产品的插头电磁场 (EMF) 这款飞利浦产品符合关于电磁场 (EMF) 的所有相关标准据目前的科学证明如果正确使用并按照本用户手册中的说明进行操作本产品是安全的初次使用之前取出内锅和加热元件之间的隔板 1 首次使用本产品之前请彻底清洁电饭煲的所有部件 ( 见清洁一章 ) 使用本产品之前确保所有部件都已完全干燥 2 将附带的饭勺支架固定在电饭煲机身上 ( 图 2) 使用本产品煮饭 1 使用附带的量杯量米每杯生米大约相当于煮熟后的 2 碗米饭不要超过内锅里指定的量 1 杯米大约为 180 毫升煮饭时的米量 : 菜单体积 / 升用米量 ( 杯 ) 体积 / 升用米量 ( 杯 ) 白饭粥 ( 仅限 HD4738/ HD4733) 简体中文 13

14 14 简体中文 2 将米彻底淘洗干净为避免损伤内锅的不粘涂层应使用另外的容器淘米 3 将淘好的米倒入内锅 4 按所倒入白米杯数依照刻在内锅上的相应水位标记加入适量的水然后将米抚平例如煮 4 杯米就应将水加至水位标记上 4 杯的位置 HD4738 ( 图 3) HD4733 ( 图 4) HD4728 ( 图 5) HD4723 ( 图 6) 注 : 内锅的水位标记只是一个参考您可以根据米的品种及您的个人喜好调整水位 5 按释放杆打开盖子 6 将内锅放入电饭煲检查内锅是否已经正确接触加热元件 ( 图 7) 请确保内锅的外表面是洁净且干燥的并且没有其他杂物黏附在加热元件及限温器上 7 合上电饭煲的盖子将插头插入插座并打开电源 HD4728/HD4723: 烹饪指示灯亮起指示产品已打开电源 ( 图 8) 8 HD4738/HD4733: 将功能选择开关设定为 RICE( 煮饭 ) ( 图 9) HD4738/HD4733: 煮饭指示灯亮起 ( 图 10) 9 按下控制键开始烹饪过程 ( 图 11) 如果按下控制键失败电饭煲将自动切换到保温模式烹饪 / 煮饭指示灯熄灭保温指示灯亮起当烹饪过程完成时烹饪 / 煮饭指示灯熄灭并且保温指示灯亮起指示电饭煲已自动切换至保温模式 ( 图 12) 10 打开盖子翻松米饭 ( 图 13) 为获得最佳效果在电饭煲切换到保温模式后翻动米饭然后将盖子盖牢翻动米饭会使过多的蒸汽散失这将使米饭更加蓬松 11 要结束烹饪过程或保温模式请将控制键向上提切断电源并且将电源插头从插座拔下 ( 图 14) 煮粥 ( 仅限 HD4738/HD4733) 1 遵循煮饭部分的步骤 1 至 7 不要超过表中针对煮粥时所示的量否则可能导致电饭煲溢出 2 将功能选择开关设定为 CONGEE( 煮粥 ) ( 图 15) 粥指示灯亮起 ( 图 16) 3 按下控制键开始煮粥过程 ( 图 17) 注 : 提示 : 请在煮粥过程进行到一半时搅动粥这将防止粥粘在锅上 4 要结束煮粥过程请将控制键向上提切断电源并且将电源插头从插座拔下 ( 图 18) 在煮粥过程结束时电饭煲不会切换至保温功能在实际烹饪过程完成之后不要让电饭煲保持通电时间过长因为这将导致粥变粘蒸食品 1 用量杯量 3 杯水并倒入内锅用水量根据要蒸的食品数量而定 3 杯水沸腾约需 8 分钟的时间 2 将要蒸的食品放在盘子上或放在蒸架上

15 简体中文 15 为确保食品均匀受热应将食品均匀摆放不要使食品堆积 3 将蒸架放入内锅当蒸食品和煮饭同时进行时请确保您放入的米量为蒸架留出了足够的空间煮饭过程完成时所蒸食品也已蒸好 4 如果使用了盘子将其放到蒸架上 5 遵循煮饭部分的步骤 7 至 10 进行操作烹饪 / 煮饭指示灯亮起并且蒸食品过程开始煮饭过程完成时所蒸食品也已蒸好 6 打开盖子小心地从盘子或蒸架上取出食品由于盘子或蒸架会很烫请戴一双厨房用手套或垫一块布当心热蒸汽 7 要结束蒸食品过程请将控制键向上提切断电源并且将电源插头从插座拔下 ( 图 14) 保温此模式使您可以在较长的时间内保持米饭是热的当煮饭过程完成时电饭煲将自动切换至保温功能烹饪 / 煮饭指示灯熄灭保温指示灯亮起建议不要让米饭的保温时间超过 12 个小时以保持其口感烹饪 / 煮饭指示灯有时会亮起表示电饭煲内的温度已降至很低并且加热元件已打开用于将电饭煲加热到适当的保温温度要结束保温功能请将控制键向上提切断电源并且将电源插头从插座拔下煮粥功能不具备保温模式清洁清洁前请拔下电饭煲的插头等到电饭煲完全冷却后再开始清洗要保护内锅的不粘涂层请勿 : - 用内锅洗盘子 ; - 将醋倒入内锅 1 将蒸架和内锅从产品的机身中取出 2 向上拉蒸汽孔帽从外盖上拆下蒸汽孔帽 ( 图 19) 3 要取下蒸汽孔帽请将其旋至释放位置 ( 图 20) 4 要重新装上请将两部分都各自装回原位然后旋至闭合位置 5 要将蒸汽孔帽装回外盖的蒸汽孔将蒸汽孔帽插入蒸汽孔并向下按紧 ( 图 21) 6 在热水中加入清洁剂用海绵或布清洁内锅蒸架饭勺和蒸汽孔帽不要用任何研磨性清洗剂材料或金属网绒清洁内锅以免损坏不粘涂层 7 只能用微湿的布擦拭电饭煲内盖和锅身内外不可将电饭煲主机身浸入水中也不能在水龙头下冲洗用干布擦拭加热元件

16 16 简体中文环保弃置产品时请不要将其与一般生活垃圾堆放在一起 ; 应将其交给官方指定的回收中心这样做有利于环保 ( 图 22) 保修与服务如果您需要详细信息或有任何问题请浏览飞利浦网站地址为您也可以与贵国的飞利浦顾客服务中心联系 ( 您可以从全球保修卡中找到电话号码 ) 如果贵国没有飞利浦顾客服务中心请与当地的飞利浦经销商或与飞利浦家庭小电器的维修中心联系故障种类和处理方法如果电饭煲工作不正常或烹饪质量有缺陷请查询以下表格如果仍不能解决问题则请联系您所在国家或地区的飞利浦客户服务中心问题原因解决方法烹饪 / 煮饭指示灯不亮烹饪过程结束后保温指示灯不亮接触不良指示灯有故障指示灯有故障检查电饭煲是否与电源连接插头是否插牢请将本产品送往当地的飞利浦经销商或经飞利浦授权的客户服务中心请将本产品送往当地的飞利浦经销商或经飞利浦授权的客户服务中心 HD4738/4733: 您已将功能选择开关切换至 CONGEE( 煮粥 ) 在煮粥过程结束时电饭煲不会切换至保温功能饭没煮好加水不足将水加到内锅的相应水位标志 ( 见使用本产品一章 ) 煮饭过程未启动按下控制键却无法开始烹饪过程内锅与加热元件接触不良确保加热元件上没有黏附其他杂物加热元件已损坏请将本产品送往当地的飞利浦经销商或经飞利浦授权的客户服务中心米饭太硬或太软加水不足或太多将水加到内锅的相应水位标志 ( 见使用本产品一章 ) 仅限 HD4738/HD4733: 您见使用本产品一章已经将功能选择滑块调至粥饭煮焦了米没有洗干净将米洗干净电饭煲没有自动切换到保温模式温度控制有故障请将本产品送往当地的飞利浦经销商或经飞利浦授权的客户服务中心

17 简体中文 17 问题原因解决方法 HD4738/4733: 您已将功能选择开关切换至 CONGEE( 煮粥 ) 在煮粥过程结束时电饭煲不会切换至保温功能 00/09/1

18 (MAX)

19 22 19

Template-A5

Template-A5 HD4754, HD4750 1 English 6 简体中文 17 HD4754, HD4750 6 English Introduction Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your