SBxx3-ClassicC1_ _en-HK

Transcription

1 zh, en - HK HS12 M.-Nr

2 3 7 8 (EU) 665/ / AirClean 21 AirClean 21 Active AirClean 30/HEPA AirClean Active AirClean 30/HEPA AirClean

3 4000 3

4

5 Miele Miele Miele Miele Miele Miele Miele 5

6 Miele Miele 6

7 Miele 7

8 8

9 a XXL * b * c d * e * f * g h EasyLock * i * j k l m n Miele o p AirClean * q On/Off / r s t u v w - * 9

10 (EU) 665/ /2013 Miele a) EN b) EN c) EN Miele 10

11 EasyLock Comfort EasyLock 11

12 Comfort Comfort 12

13 Miele a AirClean b Active AirClean 30 c HEPA AirClean 30 b c TimeStrip TimeStrip 13

14 TimeStrip Timestrip Timestrip 50 14

15 30 On/Off / 15

16 16

17 - - EasyLock 17

18 EasyLock Miele Miele Miele Miele Miele Miele 18

19 Miele Miele Miele Miele Miele GN Miele Miele Miele AirClean Miele AirClean Miele Miele Miele Miele Miele 19

20 20

21 Miele Miele AirClean Miele Miele AirClean AirClean AirClean 21

22 Active AirClean 30/HEPA AirClean 30 AirClean AirClean Active AirClean 30 HEPA AirClean 30 Active AirClean 30/HEPA AirClean 30 TimeStrip 50 22

23 10-15 AirClean 1. a b c TimeStrip 2. b c a * * - a AirClean b Active AirClean 30 c HEPA AirClean 30 23

24 Miele Miele 24

25 On/Off /

26 Miele Miele Miele Miele Miele Miele Miele AllergoTeQ (SBDH 285-3) TurboTeQ (STB 305-3) / Turbo (STB 205-3) (SBB 235-3) Hardfloor Twister (SBB 300-3) Parquet Twister (SBB 300-3) 26

27 Parquet Twister XL (SBB 400-3) MicroSet (SMC 20) PC XS (STB 20) / Turbo Mini (STB 101) (SUB 20) (SHB 30) (SMD 10) 300 (SFD 10) 560 (SFD 20) 190 (SPD 10) (SFS 10) 1.5 (SGC 20) Active AirClean 30 (SF-AA 30) HEPA AirClean 30 (SF-HA 30) AirClean Active AirClean 30 HEPA AirClean 30 27

28 BS BS 1363 ASTA BS

29

30 Contents Warning and Safety instructions... 3 Caring for the environment... 7 Guide to the appliance... 8 Notes on Delegated Regulation (EU) No. 665/2013 and 666/ Preparing for use Use Setting down and storing the vacuum cleaner Maintenance Purchasing new dustbags and filters Ordering the correct dustbags and filters When to change the dustbag How the dustbag change indicator works How to replace the dustbag When to change the motor protection filter How to change the motor protection filter When to replace the exhaust filter AirClean How to replace the AirClean exhaust filter When to replace the Active AirClean 30/HEPA AirClean 30 filter? How to replace the Active AirClean 30/HEPA AirClean 30 filter Replacing one type of exhaust filter with another When changing the filter, please note When to change the thread lifters How to replace the thread lifters Cleaning and care Problem solving guide Service Contact in case of malfunction Optional accessories Electrical connection for the UK

31 Warning and Safety instructions This vacuum cleaner complies with current safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of personal injury and damage to the vacuum cleaner, please read these instructions carefully before using it for the first time. They contain important information on its safety, operation and maintenance. Keep these instructions in a safe place and pass them on to any future owner. Always disconnect the vacuum cleaner from the mains supply when you have finished using it, before changing over accessories, as well as for maintenance work and cleaning. Switch the vacuum cleaner off at the wall socket and unplug it. Correct application This vacuum cleaner is intended for cleaning flooring in domestic households and similar residential environments. This vacuum cleaner can be used for all normal cleaning of carpets, rugs and robust hard flooring. This vacuum cleaner is not intended for outdoor use. This vacuum cleaner is intended for use at altitudes of up to 4000 m above sea level. The vacuum cleaner must only be used to vacuum dry floor surfaces. Do not use on people and animals. Any other usage, modification or alteration is not supported by the manufacturer and could be dangerous. This vacuum cleaner can only be used by people with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, if they are supervised whilst using it or have been shown how to use it in a safe way and understand and recognise the consequences of incorrect operation. 3

32 Warning and Safety instructions Safety with children Danger of suffocation. Packaging, e.g. plastic wrappings, must be kept out of the reach of babies and children. Whilst playing, children could become entangled in packaging or pull it over their head and suffocate. Children under 8 years of age must be kept away from the vacuum cleaner unless they are constantly supervised. Children 8 years and older may only use the vacuum cleaner unsupervised if they have been shown how to use it safely and recognise and understand the consequences of incorrect operation. Children must not be allowed to clean or maintain the vacuum cleaner unsupervised. Please supervise children in the vicinity of the vacuum cleaner and do not let them play with it. Technical safety Before using the vacuum cleaner and its accessories, check for any visible signs of damage. Do not use a damaged appliance. Ensure that the connection data on the data plate of the vacuum cleaner (voltage and frequency) match the mains electricity supply exactly. The vacuum cleaner is suitable for use with 50 Hz or 60 Hz without modification. The mains electrical plug must be fitted with an appropriate fuse. Reliable and safe operation of this vacuum cleaner can only be assured if it has been connected to the mains electricity supply. While the vacuum cleaner is under warranty, repairs should only be undertaken by a Miele authorised service technician. Otherwise the warranty will be invalidated. 4

33 Warning and Safety instructions Do not pull or carry the vacuum cleaner by the cable, and be careful not to damage the cable when withdrawing the plug from the socket. Keep the cable away from sharp edges and do not let it get squashed, for example, under a door. Avoid running the vacuum cleaner over the cable. This could damage the cable, plug or socket. The appliance must not be used if any of these have suffered damage. Do not use the vacuum cleaner if the cable is damaged. If the cable is damaged it must be replaced together with a complete cable rewind. For safety reasons this must only be done by Miele Service or a Miele authorised service technician. When vacuuming, in particular fine dust, e.g. sawdust, sand, plaster, flour, talcum powder etc., electrostatic charges build up naturally. Under certain conditions these charges will be released. To avoid the unpleasant effects of these discharges, a metal inlay has been incorporated into the underside of the handle. Please make sure that you keep your hand in constant contact with this metal strip during vacuuming. Do not let the vacuum cleaner get wet. Clean only with a dry cloth or slightly damp cloth when disconnected from the mains supply. Repairs should only be carried out by a Miele authorised service technician. Repairs and other work by unqualified persons can cause considerable danger to users. Miele can only guarantee the safety of the appliance when genuine original Miele replacement parts are used. Faulty components must only be replaced by Miele spare parts. Correct use To avoid the risk of damage, do not use the vacuum cleaner without the dustbag, dust compartment filter and exhaust filter in place. 5

34 Warning and Safety instructions The dust compartment cover will not close without a dustbag fitted. Do not force it. Do not vacuum up anything which has been burning or is still glowing e.g. cigarettes, ashes or coal, whether glowing or apparently extinguished. Do not use the vacuum cleaner to vacuum up any water, liquid or damp dirt. Wait until any freshly cleaned or shampooed rugs or carpets are completely dry before attempting to vacuum. Do not use the vacuum cleaner to vacuum toner dust. Toner, such as that used in printers and photocopiers, can conduct electricity. Do not vacuum up any inflammable or combustible liquids or gases and do not vacuum in areas where such substances are stored. Do not vacuum at head height and do not let the suction get anywhere near a person's head. Accessories It is not advisable to vacuum directly with the handle, i.e. without an accessory attached as the rim could get damaged and you could hurt yourself on sharp edges. Only use genuine dustbags, filters and accessories with the ORI- GINAL Miele logo on them. Otherwise the manufacturer cannot guarantee the safety of the product. Miele cannot be held liable for damage caused by incorrect use or operation or by non-compliance with these Warning and Safety instructions. 6

35 Caring for the environment Disposal of the packing material The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Recycling the packaging reduces the use of raw materials in the manufacturing process and also reduces the amount of waste in landfill sites. Disposing of the dustbag and filters Dustbags and filters are made from environmentally friendly materials, and can be disposed of with the normal household waste, as long as they have been used exclusively for general household dust. Disposing of your old appliance Before disposing of your old appliance remove the dustbag and filters and dispose of them with your household waste. Electrical and electronic appliances often contain valuable materials. They also contain specific materials, compounds and components, which were essential for their correct function and safety. These could be hazardous to human health and to the environment if disposed of with your domestic waste or if handled incorrectly. Please do not, therefore, dispose of your old appliance with your household waste. Please dispose of it at your local community waste collection / recycling centre for electrical and electronic appliances, or contact your dealer or Miele for advice. You are also responsible (by law, depending on country) for deleting any personal data that may be stored on the appliance being disposed of. Please ensure that your old appliance poses no risk to children while being stored prior to disposal. 7

36 Guide to the appliance 8

37 a XXL handle * b Handle * c Air inlet valve d Release buttons * e Connection piece for storage * f Telescopic suction tube * g Hose connection socket h EasyLock suction tube * i Telescopic suction tube release mechanism * j Dust compartment lid release catch k Suction power selector l Floorhead m Carrying handle n Original Miele dustbag o Motor protection filter p AirClean filter * q On/Off footswitch r Park System for pauses during vacuuming s Mains cable t Footswitch for automatic cable rewind u Dustbag change indicator v Accessories holder with three accessories w Suction hose Underneath - suction tube holder (not illustrated) Guide to the appliance * these features depend on model and may vary or may not be available on your vacuum cleaner. 9

38 Notes on Delegated Regulation (EU) No. 665/2013 and 666/2013 This vacuum cleaner is a domestic vacuum cleaner and is classified as a universal vacuum cleaner in accordance with the above-mentioned regulations. These operating instructions, the EU data sheet and the online energy efficiency label for this vacuum cleaner are available to download from the Miele website at The annual energy consumption stated on the data sheet and on the energy efficiency label describes the indicative annual energy consumption (kwh per year), based on 50 cleaning cycles. Actual energy consumption depends on how the vacuum cleaner is used. All tests and calculations were carried out according to the following harmonised standards applicable at the time in due consideration of the published regulation guidelines of the European Commission from September 2014: a) EN Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance. b) EN Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1: Particular requirements for vacuum cleaners. c) EN Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaner and water suction appliances. Not all floorheads and accessories supplied with the vacuum cleaner are intended for intensive cleaning of carpets or hard floors as described in the regulations. The following floorheads and settings were used to determine the values: For energy consumption and cleaning class on carpet and hard floors and sound power level on carpet the universal floorhead was used in the carpet position (press the footswitch). The values on the EU data sheet and the energy efficiency label refer exclusively to the combinations and settings of floorheads on the different floor surfaces described here. Only original Miele dustbags, motor protection filters and exhaust filters were used for all measurements. 10

39 Preparing for use Attach the suction hose Fit the connector at the other end of the suction hose into the handle until it clicks into position. Your vacuum cleaner is fitted with one of the following suction tubes, depending on model: EasyLock suction tube Comfort telescopic suction tube To assemble the EasyLock tube Insert the hose connector into the suction socket on the vacuum cleaner until it clicks into position. To detach the suction hose Press the release buttons at the side of the hose connector, and lift the hose from the socket. Connect the suction hose to the handle Hold the suction tube by the connection piece and push it into the second suction tube, turning it clockwise or anti-clockwise until it clicks into position. Slide the connection piece upwards until it clicks into position. 11

40 Connect the handle to the suction tube Insert the handle into the suction tube until it clicks into position. To do this, line up the guides on the two pieces. Grasp the release mechanism and adjust the telescopic suction tube to the required length. Connect the suction tube to the floorhead To detach the handle To detach the handle from the suction tube, press the release button and pull the handle out of the suction tube, twisting it slightly as you do so. Adjusting the Comfort telescopic suction tube One part of the Comfort telescopic tube is packed inside the other, and it can be adjusted to suit your height for comfortable vacuuming. Push the suction tube into the floorhead and turn it clockwise or anticlockwise until it clicks into position. To separate the suction tube from the floorhead press the release button and pull the suction tube away from the floorhead, twisting it slightly as you do so. 12

41 To adjust the standard adjustable floorhead This vacuum cleaner can be used for daily cleaning of carpets, rugs and robust hard flooring. Miele offer a range of other floorheads, brushes and accessories for other types of flooring and special requirements. a AirClean b Active AirClean 30 (black) c HEPA AirClean 30 (white) If your vacuum cleaner is fitted with filter b or c, you need to activate the exhaust filter timestrip change indicator. Please observe the flooring manufacturer's cleaning and care instructions. Vacuum carpets and rugs with the brush retracted: Press the foot control. Clean hard flooring which is not susceptible to scratching, as well as flooring with gaps or deep crevices in it with the brush protruding: Press the foot control. Activating the exhaust filter timestrip change indicator Depending on the model, your vacuum cleaner will be fitted as standard with one of the following exhaust filters. Pull the release catch for the dust compartment lid upwards and open the lid as far as it will go. Remove the indicator strip. 13

42 Using the accessories supplied Press the exhaust filter timestrip change indicator. After approx seconds, a thin red line will appear in the left hand side of the display. Close the dust compartment lid securely, making sure it clicks into position. Take care not to trap the dustbag when doing so. How the exhaust filter timestrip works Dusting brush Upholstery nozzle Crevice nozzle Accessory holder for the three accessories supplied Symbols on the holder show where to attach the different accessories. The exhaust filter timestrip indicator shows the remaining functional life of the exhaust filter. After approx. 50 operating hours, or approx. one year of average use, the display will be completely filled with red. Attach the accessories holder to the hose connector socket at the top or bottom of the suction hose. Make sure it clicks into position. 14

43 Standard adjustable floorhead If vacuuming for longer than 30 minutes, the mains cable must be pulled out to its fullest extent. Otherwise there is a danger of overheating and damage. To rewind the cable Switch off at the wall socket and remove the plug. Press the rewind foot switch. The cable will rewind automatically. To switch on and off For general use and also for vacuuming the stairs. For safety reasons when vacuuming stairs it is best to start at the bottom of the stairs and move upwards. Use To unwind the mains cable Press the On/Off foot control. Pull the mains cable out to the required length. 15

44 During vacuuming Curtains, fabric Upholstery, cushions Cut pile carpets, rugs and runners Energy-saving vacuuming. This setting is also very quiet Loop pile carpet and rugs Hard flooring and heavily soiled carpets and rugs When vacuuming, in particular fine dust, e.g. sawdust, sand, plaster, flour, talcum powder etc., electrostatic charges build up naturally. Under certain conditions these charges will be released. To avoid the unpleasant effects of these discharges, a metal inlay has been incorporated into the underside of the handle. Please make sure that you keep your hand in constant contact with this metal strip during vacuuming. To regulate the suction power The suction power can be regulated to suit the type of flooring being cleaned. Reducing the suction power reduces the amount of effort required to manoeuvre the floorhead. The vacuum cleaner has symbols on the controls which indicate the type of use the settings are suitable for. Turn the suction power selector manually to the suction power setting you require. To open the air inlet valve 16

45 It is easy to reduce the suction power for a short time, e.g. to prevent rugs or other objects being sucked into the vacuum cleaner. Open the air inlet valve on the handle far enough to reduce the suction power. The floorhead will be easier to manoeuvre. Close the valve when you are ready to use full power again. Setting down and storing the vacuum cleaner Park System for pauses during vacuuming The Park System allows you to conveniently park the suction tube and floorhead during pauses. If your vacuum cleaner is on a sloping surface, e.g. a ramp, - retract the telescopic suction tube fully - do not use the park system if your vacuum cleaner has an EasyLock suction tube. Park System for storage Always disconnect the vacuum cleaner from the electrical supply when you have finished using it. Switch it off at the wall socket and unplug it. Stand the vacuum cleaner upright. If your vacuum cleaner has a telescopic suction tube, retract the tubes fully so that it takes up less room for storage. Slot the floorhead into the slot in the parking attachment. Slot the floorhead downwards into the parking attachment. If your vacuum cleaner has an Easy- Lock suction tube you can separate the two sections for storage purposes. 17

46 Press the release button on the lower section and pull the top section out. Push the connection piece attached to the upper tube into the lower tube. Maintenance Always disconnect the vacuum cleaner from the electrical supply for maintenance work and for cleaning. Switch off at the wall socket and unplug it. The Miele filtration system consists of three components: Original Miele dustbag Motor protection filter Original Miele exhaust filter These will need to be replaced from time to time to ensure that your vacuum cleaner performs efficiently. We recommend only using genuine dustbags, filters and accessories with the ORIGINAL Miele logo on them. This will ensure that the suction power of the vacuum cleaner is maintained, giving the best possible cleaning results. Dustbags with the ORIGINAL Miele logo on them are not made from paper or paper-based materials and nor do they have a cardboard collar. This is why our dustbags are particularly long-lasting and reliable. Please note that appliance faults and damage originating from the use of accessories which do not carry the ORIGINAL Miele logo will not be covered by the appliance guarantee. Purchasing new dustbags and filters Original Miele dustbags and filters are available from the Miele webshop, the Miele Spare Parts Department and your Miele dealer. Ordering the correct dustbags and filters Only use original Miele GN dustbags with a blue collar and original Miele filters. These are identified by the ORI- GINAL Miele logo on the packaging. Every packet of original Miele dustbags contains four dustbags, one AirClean exhaust filter and one motor protection filter. Original Miele multipacks contain 18

47 16 dustbags, four AirClean exhaust filters and four motor protection filters (only available in selected countries). Original Miele exhaust filters can also be purchased separately from the Miele Spare Parts Dept. or your Miele dealer. Please quote the model number of your vacuum cleaner when ordering to make sure you get the correct filter. You can also order all accessories via the Miele webshop. When to change the dustbag Change the dustbag when the colour marker in the dustbag change indicator turns red, or sooner if it is no longer effective (see possible reasons for this below). Miele dustbags are disposable and designed for single use only. Dispose of the dustbag when full. Do not attempt to reuse. Blocked pores in used dustbags will reduce the suction power of the vacuum cleaner. To check the dustbag change indicator Attach the standard adjustable floorhead to the vacuum cleaner. Switch the vacuum cleaner on and select the highest power setting. Lift the floorhead off the floor a little. How the dustbag change indicator works The dustbag change indicator is set for normal household dust. This generally contains a mixture of dust, hair, threads, carpet fluff, grit etc. However, if the cleaner has been used to vacuum up fine dust, such as plaster, brick dust, cement or flour, the pores of the dustbag will become blocked very quickly. This affects the air permeability of the bag, and the marker will indicate that the bag is full even when it is not. If this happens you must still change the dustbag because suction power will be greatly reduced by blocked pores in the dustbag. If, on the other hand, a large amount of hair and carpet fluff which typically contains a lot of air is vacuumed up, the indicator may fail to react even though the bag is full. For this reason, you should check the dustbag regularly and change it if necessary. Both these extremes can occur. 19

48 How to replace the dustbag Press both release buttons at the side of the hose connector, and lift the hose from the socket. Pull the dustbag out by the grip on the collar. Fit the new dustbag into the holder as far as it will go. Leave it folded up when you take it out of the box. Close the dust compartment lid securely, making sure it clicks into position. Take care not to trap the dustbag when doing so. A safety device prevents the lid closing without a dustbag in place. Do not use force! Pull the release catch upwards and open the dust compartment lid as far as it will go. The dustbag has a flap which closes automatically when the dust compartment lid is raised to prevent any dust escaping. 20

49 Insert the hose connector into the suction socket on the vacuum cleaner until it clicks into position. When to change the motor protection filter Replace this filter every time you start a new packet of dustbags. Every packet of original Miele dustbags contains a motor protection filter. Multipacks contain four motor protection filters (only available in selected countries). How to change the motor protection filter Open the dust compartment lid. Pull the dustbag out by the grip on the collar. When to replace the exhaust filter AirClean Replace this filter every time you start a new packet of Miele dustbags. Every packet of original Miele dustbags contains one AirClean exhaust filter. Multipacks contain four AirClean filters (only available in selected countries). How to replace the AirClean exhaust filter Do not use more than one exhaust filter at a time. Open the dust compartment lid. Unclip the filter frame and replace the motor protection filter. Close the filter frame. Fit the dustbag into the holder as far as it will go. Close the dust compartment lid. Release the filter grille and raise it upwards. Grasp the used AirClean filter by the clean, unsoiled section (see arrow) and take it out. Replace it with a new AirClean exhaust filter. If you wish to fit an Active AirClean 30 or a HEPA AirClean 30 filter, see Maintenance - Replacing one type of exhaust filter with another. Close the filter grille. 21

50 Close the dust compartment lid. When to replace the Active AirClean 30/HEPA AirClean 30 filter? Insert a new exhaust filter, making it sure it goes in properly, then push it down into position. Replace this filter when the exhaust filter timestrip change indicator is completely red. The indicator lights up after approximately 50 hours of operation, which is equivalent to about a year of average use. You can continue vacuuming when the light comes on. However, the suction power will be reduced as will the effectiveness of the filter if it is not replaced in good time. How to replace the Active AirClean 30/HEPA AirClean 30 filter Do not use more than one exhaust filter at a time. Open the dust compartment lid. Press the exhaust filter change indicator. After approx seconds, a thin red line will appear in the left hand side of the display. If you wish to fit an AirClean filter, see Replacing one type of exhaust filter with another. Close the dust compartment lid. Replacing one type of exhaust filter with another Depending on model, your vacuum cleaner will be fitted as standard with one of the following exhaust filters: Lift the exhaust filter and remove it. 22

51 a AirClean b Active AirClean 30 (black) c HEPA AirClean 30 (white) Do not use more than one exhaust filter at a time. When changing the filter, please note 2. If you wish to replace exhaust filter b or c with filter a, you must insert the new filter into a filter grille * before installing. * Filter grille - see Optional accessories When to change the thread lifters The thread lifters on the suction inlet to the floorhead can be replaced. Check them from time to time and replace them if the pile has worn down. How to replace the thread lifters 1. If you wish to replace exhaust filter a with filter b or c, it is essential that you remove the filter grille before you fit the new exhaust filter. You must also activate the exhaust filter timestrip change indicator. 23

52 Use a suitable screwdriver to remove the thread lifters from the slots. Fit new thread lifters. Replacement parts are available from your Miele dealer or from the Miele Spare Parts Dept. Cleaning and care Always disconnect the vacuum cleaner from the electrical supply before cleaning it. Switch off at the wall socket and unplug it. Vacuum cleaner and accessories The vacuum cleaner and all plastic accessories can be cleaned with a proprietary cleaner suitable for plastic. Do not use abrasive cleaning agents, glass cleaning agents, allpurpose cleaners or oil-based conditioning agents. Dust compartment The dust compartment can, if necessary, be cleaned using a dry duster, brush or, if available, a second vacuum cleaner to vacuum the dust out. Do not let the vacuum cleaner get wet. If moisture gets into the appliance, there is a risk of electric shock. 24

53 Problem solving guide Many malfunctions and faults that can occur in daily operation can be easily remedied. Time and money will be saved because a service call will not be needed. The following guide may help you to find the reason for a malfunction or a fault, and to correct it. Problem The vacuum cleaner switches off automatically. Cause and remedy A temperature limiter switches the vacuum cleaner off automatically if it gets too hot. This can occur if, for instance, large articles block the suction tube or when the dustbag is full or contains particles of fine dust. A heavily soiled exhaust or dust compartment filter can also be the cause of overheating. Switch the vacuum cleaner off immediately using the On/Off foot control. Disconnect from the electricity supply. Switch off at the wall socket and unplug it. After removing the cause, wait for approximately minutes to allow the vacuum cleaner to cool down. It can then be switched on again. 25

54 Service Contact in case of malfunction In the event of any faults which you cannot remedy yourself, please contact your Miele Dealer or Miele Service. Contact information for Miele Service can be found at the end of this document. Please note that telephone calls may be monitored and recorded for training purposes and that a call-out charge will be applied to service visits where the problem could have been resolved as described in this booklet. Warranty For more information on country specific warranty terms and conditions, please contact Miele Customer Service. Optional accessories Certain models are supplied as standard with one or more of the following accessories. Please observe the flooring manufacturer's cleaning and care instructions. These and many other products can be ordered from the Miele webshop, the Miele Spare Parts Dept. or your Miele dealer. Floorheads / brushes AllergoTeQ floorhead (SBDH 285-3) This floorhead is suitable for daily hygienic cleaning of all floor surfaces. The level of cleanliness of the floor shows in a colour traffic light display when vacuuming. Turbobrush TurboTeQ (STB 305-3) / Turbobrush Turbo (STB 205-3) This brush is ideal for removing fluff and hair from short-pile carpet. Hard floorbrush (SBB 235-3) This brush is designed for use on hard flooring such as tiled or stone floors. Hard floor Twister floorbrush with swivel action (SBB 300-3) This brush is suitable for a variety of hard floor surfaces and has a swivel joint enabling it to get into awkward corners. Parquet Twister floorbrush with swivel action (SBB 300-3) (only available in selected countries) 26

55 With natural bristles for vacuuming smooth hard floors and small gaps. Parquet Twister XL floorbrush with swivel action (SBB 400-3) (only available in selected countries) With natural bristles for quickly vacuuming smooth hard floors and small gaps. Other accessories MicroSet (SMC 20) This set is specially designed for cleaning small objects and difficult to reach areas (such as PC keyboards, stereo equipment, intricately carved furniture and ornaments, models etc). Flexible Mini Turbobrush XS (STB 20) / Turbo Mini (STB 101) For vacuuming upholstery, mattresses or car seats, etc. Universal brush (SUB 20) (only available in selected countries) For dusting books, shelves, etc. Radiator brush (SHB 30) For dusting radiators, narrow shelves and crevices. Mattress nozzle (SMD 10) For vacuuming upholstery, mattresses, cushions, curtains, covers etc. Crevice nozzle, 560 mm (SFD 20) Flexible crevice nozzle for vacuuming hard to reach places. Upholstery nozzle, 190 mm (SPD 10) Extra wide upholstery nozzle for cleaning upholstered furniture, mattresses and pillows. Flexible hose extension (SFS 10) For extending the suction hose by approximately 1.5 m. Comfort handle with lighting (SGC 20) Lights up the area being vacuumed. Filters Active AirClean 30 exhaust filter (SF-AA 30) For a significant reduction of unpleasant odours. Ideal for households with pets or smokers. HEPA AirClean 30 exhaust filter (SF-HA 30) Effectively filters fine dust and allergens. Ideal for people allergic to house dust. Filter grille The filter grille is required if you wish to use an AirClean filter instead of an Active AirClean 30 filter or a HEPA AirClean 30 filter. Crevice nozzle, 300 mm (SFD 10) Extra long crevice nozzle for cleaning in folds, crevices and corners. 27

56 Electrical connection for the UK All electrical work should be carried out by a suitably qualified and competent person in strict accordance with current national and local safety regulations (BS 7671 in the UK). The voltage and frequency are given on the data plate located underneath the vacuum cleaner. Please ensure that these match the household mains supply. The fuse rating is quoted on the plug. The appliance is supplied with a cable and moulded plug ready for connection to a V/50 Hz a.c. single phase supply. Non-rewireable plugs BS 1363 The fuse cover must be re-fitted when changing the fuse, and if the fuse cover is lost the plug must not be used until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is embossed in words on the base of the plug, (as applicable to the design of plug fitted). Replacement fuses should be ASTA approved to BS1362 and have the correct rating. Replacement fuses and fuse covers may be purchased from your local electrical supplier. 28

57

58

59 United Kingdom Miele Co. Ltd. Fairacres, Marcham Road Abingdon, Oxon, OX14 1TW Customer Contact Centre Tel: Internet: Australia Miele Australia Pty. Ltd. ACN ABN Gilbert Park Drive Knoxfield, VIC 3180 Tel: Internet: China Miele (Shanghai) Trading Ltd. 1-3 Floor, No. 82 Shi Men Yi Road Jing' an District Shanghai, PRC Tel: Fax: info@miele.cn, Internet: Miele (Hong Kong) Limited 41/F , Manhattan Place 23 Wang Tai Road Kowloon Bay, Hong Kong Tel: (852) Fax: (852) customerservices@miele.com.hk Website: India Miele India Pvt. Ltd. Ground Floor Copia Corporate Suites Plot No. 9, Jasola New Delhi Tel: Fax: customercare@miele.in Internet: Ireland Miele Ireland Ltd Bianconi Avenue Citywest Business Campus Dublin 24 Tel: (01) Fax: (01) info@miele.ie Internet: Malaysia Miele Sdn Bhd Suite 12-2, Level 12 Menara Sapura Kencana Petroleum Solaris Dutamas No. 1 Jalan Dutamas Kuala Lumpur, Malaysia Phone: Fax: New Zealand Miele New Zealand Limited IRD Level 2, 10 College Hill Freemans Bay, Auckland 1011 New Zealand Tel: Internet: Singapore Miele Pte. Ltd. 163 Penang Road # Winsland House II Singapore Tel: Fax: info@miele.com.sg Internet: Manufacturer: Miele & Cie. KG, Carl-Miele-Straße 29, Gütersloh, Germany South Africa Miele (Pty) Ltd 63 Peter Place, Bryanston 2194 P.O. Box 69434, Bryanston 2021 Tel: (011) Fax: (011) info@miele.co.za Internet: Taiwan K.E. & Kingstone Co., Ltd. 6th Fl., No. 120, Sec. 2 Jianguo N. Rd. Taipei, Taiwan TEL: FAX: kenk@kenk.com.tw Website: Thailand BHIRAJ TOWER at EmQuartier 43rd Floor Unit Sukhumvit Road North Klongton Sub-District Vadhana District Bangkok 10110, Thailand United Arab Emirates Miele Appliances Ltd. Gold & Diamond Park Office No Sheikh Zayed Road P.O. Box Dubai Tel Fax MIELE (64353) info@miele.ae Website:

60 Miele (Hong Kong) Limited 41/F , Manhattan Place 23 Wang Tai Road Kowloon Bay Hong Kong Tel: (852) Fax: (852) customerservices@miele.com.hk Website: Miele Experience Centre G/F & 1/F, Lee Garden Six 111 Leighton Road Causeway Bay Hong Kong Tel: (852) Fax: (852) ExperienceCentre@miele.com.hk Miele (Hong Kong) Limited 香港九龍灣宏泰道 23 號 Manhattan Place 41 樓 4101 室電話 : (852) 傳真 : (852) 電郵地址 : customerservices@miele.com.hk 網址 : Miele 陳列室香港銅鑼灣禮頓道 111 號利園 6 期地下及一樓電話 : (852) 傳真 : (852) 電郵地址 : ExperienceCentre@miele.com.hk International Head Office Miele & Cie. KG Carl-Miele-Straße Gütersloh Germany Classic C1 (SBxx3) M.-Nr / 00