Page: 1 of 7 Date: June 2, 2009 WINMATE COMMUNICATION INC. 9 F, NO. 111-6, SHING-DE RD., SAN-CHUNG CITY, TAIPEI, TAIWAN, R.O.C. The following merchandise was submitted and identified by the vendor as: Product Description: 19 Multimedia LCD Monitor Style/ Item No.: / No. 1 Quantity: Total 1 set Testing Period: May 27, 2009 to Jun. 1, 2009 We have tested the submitted sample(s) as requested and the following results were obtained: Test Required: (According to client s test specification, please see following sheets in detail.) 1. Vibration Test Test Results: -PLEASE SEE ATTACHED SHEETS- Terence Hsieh Manager - Operation
Page: 2 of 7 1. Vibration Test: Test Equipment: Name Brand Model Serial No. Vibration Test System UNHOLTZ-DICKIE SAI60-H560BAC/2/ST 474 Controller Dactron LASER 7110357 Control Accelerometer PCB 353B34 126849 Lab Environmental Conditions: Ambient temperature: 25±3 Relative humidity: 55±20%RH Test Method/ Specification: Test Method: Reference to MIL-STD-810F, Notice 3, 2003, Method 514.5 Testing Procedures Ⅰ, Category 20-Ground vehicles-ground mobile. Table 514.5C-VII, Figure 514.5C-3 (Composite wheeled vehicle vibration exposures) Sample Condition: Operating Wave form: Random Frequency: 5~500 Hz (Test Spectrums as shown in the following sheets in detail) Impact acceleration: 1.62 & 2.05 & 2.20 grms Direction: X, Y, Z axes (See photo 7 ~ 9) Duration: 1 hour/ axis Examine the appearance of specimen(s) by visual check and perform functional check after this test. Functional check: Connect the specimen with rated power then examine whether the display function of specimen could be work normally or not. Place the product on the vibration table in its normal operating orientation and configuration. The Product shall be no fixture to the vibration table such that the vibratory input is transmitted directly to the product. Operating the product during the test. Vibrate the product up the frequency range at a rate of 5 to 500 Hz. At the appropriate level in the table of test condition in each of three orthogonal axes. The test shall last approximately 60 minutes per axis. Equivalent to 1.62 & 2.05 & 2.20 grms. Document the result during the test. The functional and electrical check is required, document the result after the check. Performance check: Running Window XP with stress software BCM diagnostics Pro version 2.30.
Page: 3 of 7 Test Method/ Specification--Continued: Test Spectrums: Vertical - Z axis Transverse - X axis Longitudinal - Y axis Frequency (Hz) PSD (g 2 /Hz) Frequency (Hz) PSD (g 2 /Hz) Frequency (Hz) PSD (g 2 /Hz) 5 0.2366 5 0.1344 5 0.0593 8 0.6889 7 0.1075 8 0.0499 12 0.0507 8 0.1279 15 0.0255 21 0.0202 14 0.0366 16 0.0344 23 0.0301 16 0.0485 20 0.0134 24 0.0109 17 0.0326 23 0.0608 26 0.0150 19 0.0836 25 0.0148 49 0.0038 23 0.0147 37 0.0040 51 0.0054 116 0.0008 41 0.0059 61 0.0023 145 0.0013 49 0.0016 69 0.0111 164 0.0009 63 0.0011 74 0.0029 201 0.0009 69 0.0040 78 0.0048 270 0.0051 78 0.0008 84 0.0033 298 0.0021 94 0.0020 90 0.0052 364 0.0099 98 0.0013 93 0.0034 375 0.0019 101 0.0025 123 0.0083 394 0.0073 104 0.0014 160 0.0041 418 0.0027 111 0.0024 207 0.0055 500 0.0016 114 0.0014 224 0.0139 equivalent to 1.62 G rms 117 0.0020 245 0.0031 121 0.0012 276 0.0129 139 0.0024 287 0.0036 155 0.0021 353 0.0027 161 0.0034 375 0.0049 205 0.0042 500 0.0010 247 0.0303 equivalent to 2.20 G rms 257 0.0027 293 0.0092 330 0.0116 353 0.0231 379 0.0083 427 0.0220 500 0.0014 equivalent to 2.05 G rms
Page: 4 of 7 Specimen: Style/ Item No.: / No. 1 Quantity: total 1 set Test Result: Style/Item No. Check Item Appearance check (Visual check) Functional Check & Performance Check / No. 1 No visible damage Normal
Page: 5 of 7 Test Photos: 1. Appearance of specimen 2. Appearance of specimen 3. Appearance of specimen 4. Appearance of specimen 5. Appearance of specimen 6. Appearance of specimen
Page: 6 of 7 Test Photos--Continued: 7. Vibration Test: X axis 8. Vibration Test: Y axis 9. Vibration Test: Z axis 10. Functional check (gn)2/hz 1.0167 profile(f) high-abort(f) 0.1000 low-abort(f) high-alarm(f) low-alarm(f) 0.0100 control(f) 0.0010 0.0001 6.31E-05 5.00 10.00 100.00 Frequency (Hz) 11. Frequency response spectrum: X axis 500.00
Page: 7 of 7 Test Photos--Continued: (gn)2/hz 0.4955 0.1000 0.0100 profile(f) high-abort(f) low-abort(f) high-alarm(f) low-alarm(f) control(f) 0.0010 0.0001 6.31E-05 5.00 10.00 100.00 Frequency (Hz) (gn)2/hz 6.6069 1.0000 12. Frequency response spectrum: Y axis 500.00 profile(f) high-abort(f) low-abort(f) high-alarm(f) 0.1000 low-alarm(f) control(f) 0.0100 0.0010 0.0001 6.31E-05 5.00 10.00 100.00 Frequency (Hz) 13. Frequency response spectrum: Z axis 500.00 The End of Test Report