申请单位 Applicant 地址 Address 光路新能源材料 ( 上海 ) 有限公司 LUSUN NEW ENERGY MATERIALS (SHANGHAI) CO.,LTD. 上海莘庄工业区春西路 688 号 NO.688 CHUNXI ROAD XINZHUANG AREA MINHANG SHANGHAI 第 1 页共 8 页 Page 1 of 8 以下测试之样品及样品信息由申请者提供并确认 The following sample(s) and sample information was/were submitted and identified by/on the behalf of the client 样品名称 Lead Frame Sample Name Lead Frame 样品型号 ITO220/V0/V1;TO-220/F/FA/FL/AB/BP/HD;TO263;TS6P;D2PAK;TO-247; TO3P/3PS; /SMA/SOD/CLIP etc. Part No. ITO220/V0/V1;TO-220/F/FA/FL/AB/BP/HD;TO263;TS6P;D2PAK;TO-247; TO3P/3PS; /SMA/SOD/CLIP etc. 材料名称 KFC Material 样品接收日期 Sample Received Date 样品检测日期 Testing Period KFC 2019.08.08 Aug. 8, 2019 2019.08.08-2019.08.13 Aug. 8, 2019 to Aug. 13, 2019 检测要求 Test Requested 根据客户要求, 对所提交样品中的铅 (Pb), 镉 (Cd), 汞 (Hg), 六价铬 (Cr(VI)), 多溴联苯 (PBBs), 多溴二苯醚 (PBDEs), 邻苯二甲酸酯 (DBP, BBP, DEHP, DIBP), 铍 (Be), 锑 (Sb), 氟 (F), 氯 (Cl), 溴 (Br), 碘 (I) 进行测试 As specified by client, to test Lead(Pb), Cadmium(Cd), Mercury(Hg), Hexavalent Chromium(Cr(VI)), Polybrominated Biphenyls(PBBs), Polybrominated Diphenyl Ethers (PBDEs), Phthalates (DBP, BBP, DEHP, DIBP), Beryllium(Be), Antimony(Sb), Fluorine (F), Chlorine (Cl), Bromine (Br), Iodine (I) in the submitted sample(s). 检测依据 / 检测结果 Test Method/Test Result(s) 请参见下页 Please refer to the following page(s). 主检 Tested by 批准 Approved by 陈凯敏实验室经理 Lab Manager 上海华测品标检测技术有限公司 Centre Testing International Pinbiao(Shanghai) Co., Ltd. 审核 Reviewed by 日期 2019.08.13 Date No. R201803894 上海市浦东新区新金桥路 1996 号 No. 1996, Xinjinqiao Road, Pudong New District, Shanghai,China
检测依据 Test Method 测试项目 Test Item(s) 铅 Lead(Pb) 镉 Cadmium(Cd) 汞 Mercury(Hg) 六价铬 Hexavalent Chromium(Cr(VI)) 多溴联苯 Polybrominated Biphenyls(PBBs) 多溴二苯醚 Polybrominated Diphenyl Ethers (PBDEs) 邻苯二甲酸酯 Phthalates (DBP, BBP, DEHP, DIBP) 铍 Beryllium(Be) 锑 Antimony(Sb) 氟 Fluorine (F) 氯 Chlorine (Cl) 溴 Bromine (Br) 碘 Iodine (I) 测试方法 Test Method IEC 62321-5:2013 IEC 62321-5:2013 IEC 62321-4:2013+AMD1:2017 CSV IEC 62321-7-1:2015 IEC 62321-6:2015 IEC 62321-6:2015 IEC 62321-8:2017 参考 US EPA 3050B:1996 & US EPA 6010D:2014 Refer to US EPA 3050B:1996 & US EPA 6010D:2014 参考 US EPA 3050B:1996 & US EPA 6010D:2014 Refer to US EPA 3050B:1996 & US EPA 6010D:2014 参考 EN 14582:2016 Refer to EN 14582:2016 参考 EN 14582:2016 Refer to EN 14582:2016 参考 EN 14582:2016 Refer to EN 14582:2016 参考 EN 14582:2016 Refer to EN 14582:2016 第 2 页共 8 页 Page 2 of 8 测试仪器 Measured Equipment(s) UV-Vis GC-MS GC-MS GC-MS IC IC IC IC
检测结果 Test Result(s) 铅 Lead(Pb) 镉 Cadmium(Cd) 汞 Mercury(Hg) 六价铬 Hexavalent Chromium(Cr(VI)) 多溴联苯 Polybrominated Biphenyls(PBBs) 一溴联苯 Monobromobiphenyl 二溴联苯 Dibromobiphenyl 三溴联苯 Tribromobiphenyl 四溴联苯 Tetrabromobiphenyl 五溴联苯 Pentabromobiphenyl 六溴联苯 Hexabromobiphenyl 七溴联苯 Heptabromobiphenyl 八溴联苯 Octabromobiphenyl 九溴联苯 Nonabromobiphenyl 十溴联苯 Decabromobiphenyl 多溴二苯醚 Polybrominated Diphenyl Ethers (PBDEs) 一溴二苯醚 Monobromodiphenyl ether 二溴二苯醚 Dibromodiphenyl ether 三溴二苯醚 Tribromodiphenyl ether 四溴二苯醚 Tetrabromodiphenyl ether 五溴二苯醚 Pentabromodiphenyl ether 六溴二苯醚 Hexabromodiphenyl ether 七溴二苯醚 Heptabromodiphenyl ether 八溴二苯醚 Octabromodiphenyl ether 九溴二苯醚 Nonabromodiphenyl ether 十溴二苯醚 Decabromodiphenyl ether 12 mg/kg 第 3 页共 8 页 Page 3 of 8 2 mg/kg 2 mg/kg 2 mg/kg 0.10 μg/cm² (LOQ)
检测结果 Test Result(s) 邻苯二甲酸酯 Phthalates (DBP, BBP, DEHP, DIBP) 邻苯二甲酸二丁酯 Dibutyl phthalate(dbp) CAS#:84-74-2 邻苯二甲酸丁基苄基酯 Butyl benzyl phthalate(bbp) CAS#:85-68-7 邻苯二甲酸二 (2- 乙基 ) 己酯 Di- (2-ethylhexyl) phthalate(dehp) CAS#:117-81-7 邻苯二甲酸二异丁酯 Diisobutyl phthalate(dibp) CAS#:84-69-5 铍 Beryllium(Be) 锑 Antimony(Sb) 第 4 页共 8 页 Page 4 of 8 50 mg/kg 50 mg/kg 50 mg/kg 50 mg/kg 氟 Fluorine(F) 氯 Chlorine(Cl) 溴 Bromine(Br) 碘 Iodine(I) 样品 / 部位描述 Sample/Part Description 铜色金属 Cupreous metal 备注 : Remark: 注释 : Note: 对于检测铅, 镉, 汞, 铍, 锑之样品已完全溶解 - = 未检出 ( 小于方法检出限或定量限 ) -mg/kg = ppm = 百万分之一 -LOQ = 定量限, 六价铬的定量限为 0.10 µg/cm² - 六价铬浓度小于 0.10 µg/cm², 样品未检出六价铬 The sample(s) had been dissolved totally tested for Lead, Cadmium, Mercury, Beryllium, Antimony. -MDL = Method Detection Limit - = Not Detected (<MDL or LOQ) -mg/kg = ppm = parts per million -LOQ = Limit of Quantification, The LOQ of Hexavalent chromium is 0.10 µg/cm² - The sample is negative for Cr(VI) The Cr(VI) concentration is below 0.10 µg/cm². The coating is considered a non-cr(vi) based coating. 本报告中的数据结果供科研 教学 企业内部质量控制 企业产品研发等目的用 The testing data and result(s) in this report is(are) just for scientific research, education, internal quality control and product development etc.
检测流程 Test Process 1. 铅 (Pb), 镉 (Cd) Lead(Pb), Cadmium(Cd) 第 5 页共 8 页 Page 5 of 8 2. 汞 (Hg) Mercury(Hg) 3. 六价铬 (Cr(VI)) Hexavalent Chromium(Cr(VI))
4. 多溴联苯 (PBBs), 多溴二苯醚 (PBDEs) Polybrominated Biphenyls(PBBs), Polybrominated Diphenyl Ethers (PBDEs) 第 6 页共 8 页 Page 6 of 8 5. 邻苯二甲酸酯 (DBP, BBP, DEHP, DIBP) Phthalates (DBP, BBP, DEHP, DIBP) 6. 铍 (Be), 锑 (Sb) Beryllium(Be), Antimony(Sb)
7. 氟 (F), 氯 (Cl), 溴 (Br), 碘 (I) Fluorine (F), Chlorine (Cl), Bromine (Br), Iodine (I) 第 7 页共 8 页 Page 7 of 8
样品图片 Photo(s) of the sample(s) 第 8 页共 8 页 Page 8 of 8 声明 Statement: *** 报告结束 *** *** End of report *** 1. 无批准人签字 专用章 及报告骑缝章无效 ; This report is considered invalid without approved signature, special seal and the seal on the perforation; 2. 样品及样品信息由申请者提供, 申请者应对其真实性负责,CTI 未核实其真实性 ; The sample(s) and sample information was/were provided by the client who should be responsible for the authenticity which CTI hasn t verified; 3. 本报告检测结果仅对受测样品负责 ; The result(s) shown in this report refer(s) only to the sample(s) tested; 4. 未经 CTI 书面同意, 不得部分复制本报告 ; Without written approval of CTI, this report can t be reproduced except in full; 5. 如中的英文内容与中文内容有差异, 以中文为准 In case of any discrepancy between the English version and Chinese version of the testing reports (if generated), the Chinese version shall prevail.