Mixcder ShareMe 7 User Manual

Size: px

Start display at page:

Download "Mixcder ShareMe 7 User Manual"

陨柏
7 years ago
Views:

1 User s Manual MODEL:ShareMe7 Wireless Headphone

2 Important safety instruction If used in the correct method, this design and production of this product can ensure your personal safety completely. However, any inappropriate use may lead to potential risk and danger of electric shock or fire hazard. Please read all the safety instructions before installing and using the product. In particular, attention shall be given to the following information: 1. It needs to be stored or used in the ambient temperature. 2. It shall not be placed in water or wet locations. 3. It can t be disposed randomly for it may cause environmental pollution. 4. Without approval, It shall not be disassembled or repaired. 5. The built-in lithium battery can t be disposed in the fire or other places to prevent causing fire hazards. 6. It shall be cleaned with dry cloth. 7. Whenever there is damage, it needs to be repaired by professional personnel. Charging the battery Fully charge the battery for about 2 hours before using the battery for the first time. 1. Plug the smaller end of USB charging cable into the Micro-USB interface of the connector. 2. Next, plug the other end of USB charging cable into other power charging devices or a computer with the power on. Package content 1. Wireless headphone 2. Micro USB charging cable mm audio cable 4. User manual EN-1

3 Headphone controls and connector Charging LED indicator Micro USB Charging interface Previous track / V- Next track/ V+ Power on/off Microphone 3.5mm audio cable jack LED indicator Function Power on Power off Calls operation Button operation Press and hold the Power on/off button for 3-5 seconds and a power on audio sound is heard. Press and hold the Power on/off button for 3-5 seconds and a power off audio sound is heard. 1. To answer an incoming call, tap the Power on/off button once; tap once again to hang up the call. Press and hold the button twice to reject incoming calls. 2. During the call, press and hold the Power on/off button for 2 seconds to seamlessly switch the conversation between the headphone and the mobile phone. EN-2

4 Calls operation Volume control Previous/Next track Pause/Play Activate SIRI 3. When an incoming call from the third party occurs during the call, tap the Power on/off button to hang up the call and to answer the third party s incoming call; press and hold the Power on/off button to put the call on hold and to answer the third party s incoming call. 4. When Bluetooth is connected, press and hold the "Power on/off button for 2 seconds to retrieve the last dialed number. Tap the + button to increase the volume. When reaching the maximum volume, a beep sound is heard. Tap the - button to reduce the volume. While the music is playing, press and hold the + button to skip to the next song; press and hold the - button to go to the previous song. While the music is playing, tap the Power on/off button to pause the music; tap once again to continue playing the music. When Bluetooth is connected, tap the "Power on/off button twice to activate SIRI. Pairing the device 1.Make sure there is power remaining in ShareMe 7. Press and hold the Power on/off button for about 8-10 seconds, there will be a prompt tone, the blue and red LEDs will flash alternately, this indicates that the headphone has entered pairing mode. 2.Once the Bluetooth system has discovered other devices, select Mixcder ShareMe 7 from the Bluetooth device list. If connected, Voice prompt says Pairing successfully and connected. Please note: ShareMe 7 must have been previously paired with your device before you can connect, It will pair with the last paired device automatically when it is on. If paired, There will be a voice prompt of connected. If unpaired, There will be a voice prompt of disconnected EN-3

5 ShareMe function Two headphones are connected to the same device to listen to the same music or audio program at the same time. ShareMe pairing 1. Turn on two headphones to be in the pairing mode together (by pressing and holding the Power on/off button until the indicator flashes red and blue alternately) and these two headphones will complete the pairing process automatically (After the pairing process is completed, the indicator of one of the headphones will light up blue automatically; the other headphone continuously flashed red and blue alternately and awaits to be paired with the portable device). 2. Activate the Bluetooth of the portable device and select AUSDOM Share Me 7 from the list for pairing. If the pairing process is successful, a pairing successfully, second device connected audio sound is heard. At the same time, the left channel audio sound is heard in the primary headphone; the right channel audio sound is heard in the secondary headphone. Using ShareMe To use the headphone again after the Share Me pairing process is completed, no matter whichever the primary headphone or the secondary headphone is turned on first, when the second headphone is turned on, it will automatically paired with the headphone that was turned on first. Both headphones can provide the function of listening to the same music or audio programs at the same time. When the secondary headphone is turned off while both headphones are in use, the primary headphone will not be affected and can be in use continuously. If the primary headphone is turned off first and the secondary headphone is still expected to be in use, the indicator of the secondary EN-4

6 headphone will return to the pairing mode and flash red and blue alternately. At this moment, manually pair the headphone with the device. This is a one time process. Afterward, the user only needs to tap the Power on/off button of the secondary headphone to reconnect with the device. ShareMe button control 1. To receive an incoming call, press the Power on/off button; press the button again to hang up. Press and hold the Power on/off button for 2 seconds to reject incoming calls. Calls operation Activate SIRI Volume control Back/Next Pause/Play 2. During the call, press and hold the Power on/off button for 2 seconds to seamlessly switch the conversation between the headphone and the mobile phone. 3. When an incoming call from the third party occurs during the call, tap the Power on/off button to hang up the call and to answer the third party s incoming call; or press and hold the Power on/off button to put the call on hold and to answer the third party s incoming call. 4. When Bluetooth is connected, press and hold the "Power on/off button for 2 seconds to retrieve the last dialed number. When Bluetooth is connected, tap the "Power on/off button twice to activate SIRI. Tap the + button to increase the volume. When reaching the maximum volume, a beep sound is heard. Tap the - button to reduce the volume. While the music is playing, press and hold the + button to skip to the next song; press and hold the - button to go to the previous song. While the music is playing, tap the Power on/off button to pause the music; tap once again to continue playing the music. EN-5 Only the primary headphone has the function. Both headphones can control simultaneously

7 Note: 1.When one headphone is connected to the device, the effective range of the Bluetooth is 10 meters. when two headphones are connected to the device, the effective range of the Bluetooth between two headphones is 5 meters. 2.When use 3.5mm audio cable as wired headphones, It needs to choose the Bluetooth manually and avoid mutual interference. External audio resource play Connecting the external audio resources with this headphone by 3.5mm audio cable. Headphone indicator Red and blue blinks pairing mode Blue flashing in every 1 seconds Power on Blue Bluetooth connected line-in mode Red Battery is recharging LED off Red keep flashing Battery is fully charged Low battery EN-6

8 Technical information Model Mixcder Share Me 7 Bluetooth version V 4.1 Supported protocols A2DP AVRCP HSP HFP Frequency 16Hz 24KHz Transmission range 10m Charging time 2hours Standby time About 300 hours Weight 170g Operating temperature -20 to 45 Storage temperature 5 to 40 Trouble shooting Q1. Why can t I power on the headphone? A1.1. The headphone may have run out of the battery power. Please charge the battery using the charging cable. Q2. Why can t I connect the headphone to my Bluetooth device? A2.1. The Bluetooth function on your device may have been turned off. Please turn on the Bluetooth function on your device and allow it to search for compatible devices. A2.2. The headphone may have been connected to another device. Please disconnect (unpair) the headphone from the previous device before connecting them to a new one. A2.3. The headphone may not have been recognized by your device. Please turn off the headphone, turn them back on, search for the headphone on your Bluetooth enabled device, and make the connection again. A2.4. The headphones may be too far away from your Bluetooth device. Please make sure that the headphones are close enough to your device, and there is no obstacle between EN-7

9 them. Q3. Why aren t the headphones playing sound tracks in the Bluetooth mode? A3.1. The headphones may not have been selected as the output device. Please adjust the settings on your Bluetooth enabled device to use the headphones to play the sound tracks. A3.2. The volume may have been adjusted to the minimum. Please press to increase the volume. Q4. Why is the sound quality very poor in the Bluetooth mode? A4.1. The Bluetooth connection may not be in its optimal condition. Please make sure that the headphones are close enough to your device, and there is no obstacle between them.

10 1.ShareMe 7 2.ShareMe 7 3.ShareMe 7 4.ShareMe 7; 5. 6.ShareMe 7 7.ShareMe USBShareMe 7 Micro USB 2.Micro USB mm 2.Micro USB 4. CN-1

11 3-5 power on 3-5 power off CN-2

12 SIRI 4. 2 beep SIRI 1. ShareMe Mixcder ShareMe 7 Pairing successfully, connected. ShareMe7 connected Disconnect Share Me Share Me CN-3

13 2. Mixcder Share Me 7 pairing successfully second device connect left channel, right channel. Share Me share me Share Me SIRI SIRI beep CN-4

14 Line-in 3.5mm AUX-In /AUX-In CN-5

15 Q1 A1.1: Q2 A2.1: A2.2: A2.3: A2.4: Q3 A3.1: A3.1: Q4 A4.1: CN-6

16 Mixcder Share Me 7 V 4.1 A2DP AVRCP HSP HFP 16Hz 24KHz g -20 to 45 5 to 40 CN-7

17 CN-8

18 For more information, please visit our official website Your valuable comments and suggestions on improving Mixcder products are welcomed!

CANVIO_AEROCAST_CS_EN.indd

CANVIO_AEROCAST_CS_EN.indd 简体中文...2 English...4 SC5151-A0 简体中文步骤 2: 了解您的 CANVIO AeroCast CANVIO AeroCast 无线移动硬盘快速入门指南欢迎并感谢您选择 TOSHIBA 产品有关您的 TOSHIBA 产品的详情, 请参阅包含更多信息的用户手册 () 安