- PDF Free Download

Size: px

Start display at page:

Download ""

淹凌
6 years ago
Views:

1 RF-603 Wireless Flash Trigger / Synchronized Shutter Release Remote Control Transceiver 无线引闪 / 快门遥控同步收发器 User Manual EN 使用手册中文

3 Contents General description 1 Cautions 2 Include items 3 The name of each part for RF Preparation before using 5 How to fix and install 6 Wireless flash trigger & testing 7 Wireless flash /studio flash trigger 8 Wired/wireless remote shutter release 9 Function extend Specification 12 EN

4 EN 1 General description Thank you for purchasing YongNuo products in advance. Please read this user manual carefully and learn how to use camera and flash before. RF-603 using a global free FSK 2.4GHz wireless channel which can be suitable in many country. RF-603 with FSK, can guarantee speed, distance and stability. Within capacious areas, the remote control distance may reach to 100m. RF-603 wireless flash trigger system consist two or more similar transceivers, automatically change transmit and receive state, namely two or more transceivers can be used at the same time to control cameras or flash lights. In support of flash waking up and triggering synchronically, with PC sync cable (optional) can be triggering studio lights sync, with specially camera shutter connecting cable (optional) can be used as wired / wireless shutter release remote control. Even installed on the flash can also be used as a shutter release remote and flash trigger sync. When special transceiver for Canon or Nikon were used, the flash sync speed reach to 1/320s(some of models may reach to 1/250s only or less, difference models of flash and camera using may achieved difference flash sync speed).

5 Cautions 1. As this is an electronic product accessory, some of the environment causes may affect the working. However this is hardly ever to get this situation, don't worry. 2. Do not pull the wires and turn off the camera when connecting. 3. For a long time non-use, please turn the transceiver off and remove the batteries. 4. Do not put it in high temperature, such as a closed car under direct sunlight, the control panel and other high temperature areas. 5. Keep dry, do not use wet hands contact with the product, the product must not be immersed in water or exposed to rain, and this may and this may lead to not work properly. 6. Do not used in the flammable occasion in violation of this warning may cause an explosion or fire. 7. Owing to this product include battery, please operate it strictly according to related rules, otherwise maybe cause explosion, fire or physical injury. 8. Do not trigger the flash close to a person's eyes, it may impair the person's vision. EN 2

6 Include items EN 3 RF-603N RF-603C (For Nikon only) (For Canon only) PC sync cable/shutter connecting cable Two transceivers RF-603N or RF-603C attached in the package, work to receive and transmit, which can work under different condition by different connection of cameras and flash lights. Connecting cable and valuable attachments will be different according to different regions.

7 ON The name of each part for RF OFF 3 8 RF-603N FSK 2.4GHz MADE IN CHINA RF-603N for Nikon RF-603C for Canon EN 1 Awakening indicator light (green) /Flash trigger indicator light (red) 2 Hot shoe / Hot shoe contacts 3 Power indicator light (green) /Shutter release indicator light(red) 4 Power switch 5 2.5mm shutter remote cable socket 6 Shutter release button 7 PC socket 8 Hot shoe mounting foot 9 Channel setting switch 10 Battery room 4

8 Preparation before using Channel Setting Opened the protective film, use the channel setting switch to set two or more transceivers as the same code. Battery installation Slide to open the battery room, install two AAA batteries for each transceiver according to the "+/-" marks shown. EN Power on/off Slide the power switch to "ON", the power indicator light will turn on(green), slide the power switch to "OFF" to turn off. The follow cases are based on two or more transceivers at same channel on power. 5

9 How to fix and install Fixing the flash on transceiver: Install the flash on the hot shoe of the transceiver, lock the flash and ensure all are fixed well. Fixing the transceiver on light stand: Mount the transceiver on the rack with fixing clip such as light stand bracket (B Type) by hot shoe mounting foot, and tight the locking screw. EN Fixing the transceiver on camera: Mount the transceiver on the hot shoe of the camera by hot shoe mounting foot. RF-603C for Canon camera,rf-603n for Nikon camera. 6

10 Wireless flash trigger & testing Transceiver must be fixed on the camera for testing and triggering. Make sure all the transceivers are fixed well, the flash must be set to Manual mode. 1. Press the shutter release button halfway of the camera to focus, the flash will be awaken if the flash is on the status of sleep, awakening indicator light of transceivers will turn on(green) in same channel. 2. In the state of awakening indicator on, press the shutter release button completely of the transceiver which EN installed on the hot shoe of the camera to testing flash trigger, the off-camera flash will be triggering once. 3. After focusing, press the shutter release button completely of the camera to shoot with flash trigger synchronously, and the flash trigger indicator will turn on (red) of transceivers at the same time. If the flash can not be awaked, please turn off the 7 power saving mode of the flash.

11 Wireless flash/studio flash trigger sync Camera controls one or more flashes and studio flash lights. Purchase YongNuo studio flash PC sync cable according to different studio flash. 1. Insert the PC connecting cable plug with nut into the PC socket of transceiver. 2. Screw down the nut. 3. Fix the transceiver near the studio flash lights, and insert the cable plug with jack into the control socket of studio flash lights. 4. Install the transceiver on the hot shoe of the camera, after focusing, press the shutter release button completely of the camera to shoot with all off-camera flash lights triggering synchronously, and the flash trigger indicator light will turn on(red) of transceivers at the same time. EN 8

12 Wired/wireless remote shutter release This product may achieve wired remote shutter release/ wireless remote shutter release, in support of single frame, continuous photograph, delay and bulb shooting modes. And the modes shall be set on the camera before using. Additional YongNuo 2.5mm shutter connecting cable needs to be purchased. 1. Single transceiver can be used as a wired remote shutter release.press the release button halfway of the transceiver to focus, press completely to shoot, the EN shutter indicator light will turn on(red). 2. When it is used as wireless remote shutter release, fix one transceiver on the hot shoe or near the camera,and hold the other transceiver.as shown in the figure, press the shutter release button halfway of the transceiver which on your hand, and the camera will focus, press the button completely to shoot, meanwhile, the shutter 9 indicator light will turn on( red). Connected the shutter connecting cable as shown in the figure.

13 Function extend Handhold the flash for remote flash trigger sync Take the RF-603 on flash light as shutter release remote control,additional YongNuo 2.5mm shutter connecting cable needs to be purchased. 1. Install the handhold flash on the hot shoe of the transceiver as transmitter. 2. Fixed the camera such as a tripod, installed the other transceiver on the hot shoe of the camera as receiver,and connected with specially shutter cable to the external shutter socket of the camera. 3. Press the shutter release button of the transceiver on flash for remote shooting, and the flash will be triggering synchronously. The function is available for single frame shooting mode only. If the camera failed to focus, it may take no photograph even signal receiving, adjust the focus mode to "M" (manual) for the lens. EN 10

14 Function extend Remote shooting with flash trigger sync Several RF-603 combination using, additional YongNuo 2.5mm shutter connecting cable and more RF-603 transceivers needs to be purchased. 1. Install one of transceiver on the hot shoe of the camera, and connected the shutter connecting cable to the camera. 2. Install the flash on the hot shoe of the other transceivers, or connected with PC sync cable to studio flash lights. 3. Handhold one of transceiver as a remote control transmitter, press the shutter release button halfway of the transceiver to focus, press the shutter release EN button completely to remote shooting with flashes trigger sync. When it is used for combination of the RF- 603 control of cameras and flash lights, as the cameras have difference reaction time, the shooting time may be small differences. If the camera failed to focus, it may take no photograph even signal receiving, adjust the focus mode to "M" (manual) for the lens. 11

15 Specification Type: FSK 2.4GHz wireless remote control system Transmission distance: 100m Channels: 16 Shutter release: half-press, full-press Shutter interface: 2.5mm socket Studio flash light interface: standard PC socket Battery: AAA 2 Stand-by time: over 45 hours Size (W x H x D): 37mm 30mm 81.5mm HongKong YongNuo Photographic Equiment Co., Ltd. Address:G/F,4 Bulkeley Street, Hung Hom,Kowloon,HongKong After-sales:service@hkyongnuo.com Tel:(86) Web: EN 12

17 目录产品功能简介 1 注意事项 2 随附物品 3 RF-603 各部位名称 4 使用前准备 5 固定及安装 6 无线引闪及测试 7 无线引闪闪光灯影室灯 8 有线快门线无线快门线功能 9 功能延伸规格 12 中文

18 中文产品功能简介首先感谢您购买永诺产品, 在使用前, 请您务必通读并理解本使用说明书和相机及闪光灯的使用方法 RF-603 产品使用 2.4GHz 无线频道, 适用更多国家免费频道采用 FSK 制式更有效保证速度距离及其稳定性, 在空旷环境遥控距离最远可达 100 米 RF-603 无线闪光灯同步触发套装由两只相同的收发器组成, 自动切换发射和接收状态, 即您可以使用两只或多只收发器在同一时刻控制多台相机及闪光灯支持闪光灯的唤醒并同步触发, 搭配影室灯同步触发 PC 线 ( 另购 ) 可同步触发影室灯, 搭配相机专用快门线 ( 另购 ) 可实现有 / 无线快门遥控功能, 即使是装在闪光灯上的收发器也可以作为无线快门遥控并同步触发闪光使用尼康或佳能相机专用型收发器控制闪光灯时, 相机闪光同步速度最高达 1/320 秒 ( 部分相机型号只能达到 1/250 秒甚至更低, 不同型号的闪光灯与相机组合使用的同步速度不同 ) 1

19 注意事项 1. 本产品属电子产品的附件, 有可能因外界环境因素影响而造成相机不能拍摄或异常动作请勿担心, 这种情况的可能性非常小 2. 连接线与相机连接时, 请勿拉扯连接线, 并在关闭相机电源时连接 3. 长时间不使用本产品时, 请将电源关闭, 并将电池取出 4. 请勿置于高温中, 如阳光直射下的封闭汽车内控制面板等高温地方 5. 请保持干燥, 勿用湿手接触产品, 亦不可将产品浸入水中或暴露雨中, 否则可能引起无法正常使用, 甚至损坏 6. 请勿在易燃易爆场合中使用, 违反此警告可能引起爆炸或火灾 7. 本产品涉及电池, 关于电池的使用请严格按照相关规定, 否则会引起财产损失或人身伤害 8. 搭配闪光灯使用时, 请勿将闪光灯靠近人眼闪光, 否则可能造成视力伤害中文 2

20 随附物品中文 RF-603N 尼康相机专用 RF-603C 佳能相机专用 PC 同步线 / 快门连接线 3 包装内附 RF-603N 或 RF-603C 收发器两只, 兼备收发功能, 在与相机和闪光灯的不同连接方式工作在不同的收发状态下连接线及增值附件根据不同区域将会有所不同

21 ON RF-603 各部位名称 OFF 3 8 RF-603N FSK 2.4GHz MADE IN CHINA RF-603N 尼康相机专用 RF-603C 佳能相机专用 1 唤醒指示灯 ( 绿色 )/ 触发指示灯 ( 红色 )2 热靴座 / 热靴触点中文 3 电源指示灯 ( 绿色 )/ 快门指示灯 ( 红色 )4 电源开关 5 2.5mm 快门线插座 6 快门释放按钮 7 PC 插座 8 热靴固定脚 9 频道设置开关 10 电池舱 4

22 使用前准备频道设置揭开保护膜, 使用频道设置开关把收发器设置在相同的编码位置电池安装打开电池仓, 依照电池仓上的 +/- 指示分别为两只收发器安装两只 AAA 电池中文 5 开 / 关电源将电源开关推到 ON 的位置开启电源, 绿色电源指示灯亮, 推到 OFF 位置关闭以下功能说明均为设置在相同频道时的两只或多只收发器电源开启的状态下

23 固定及安装闪光灯固定于收发器上 : 安装机载闪光灯在收发器的热靴坐上, 锁紧闪光灯, 确保各环节连接牢固收发器固定于灯架上 : 收发器可利用热靴脚固定在 B 型灯架等带有固定夹的支架上, 并锁紧旋钮收发器固定于相机热靴座 : 收发器利用热靴脚安装在相机机顶热靴即可, 请使用专用收发器 ( 佳能单反相机使用 RF-603C 尼康单反相机使用 RF-603N) 中文 6

24 中文无线引闪及测试收发器需固定于相机上进行闪光测试和闪光触发, 确认所有收发器已固定牢固, 闪光灯需设置在手动 "M" 模式 1. 半按相机快门释放按钮, 相机进行对焦动作, 如果此时闪光灯处于休眠状态, 将会被唤醒, 相同频道的收发器绿色唤醒指示灯亮 2. 在唤醒指示灯亮的状态下全按一下安装于机顶热靴上的收发器的快门释放按钮, 进行引闪测试, 离机闪光灯将被触发闪光一次 3. 对焦完成后, 完全按下相机快门释放按钮时, 闪光灯将与相机快门同步闪光, 同时收发器的触发指示灯亮 ( 红色 ) 如果闪光灯不能被唤醒, 请关闭其节电模式 7

25 无线引闪闪光灯影室灯相机无线同步引闪一台或多台闪光灯影室灯实现此功能需要另购永诺影室灯连接线, 根据不同影室灯的控制接口使用不同的连接线 1. 使用 PC 连接线带螺母插头插入收发器 PC 插座 2. 旋紧螺母 3. 将收发器固定在影室灯附近, 使用 PC 连接线插头一端插入影室灯触发插座 4. 将收发器安装于相机机顶热靴, 对焦完成后, 完全按下相机快门释放按钮时, 所有闪光灯影室灯将与相机同步闪光, 同时收发器的触发指示灯亮 ( 红色 ) 中文 8

26 有线快门线 / 无线快门线功能本产品可实现有线快门线 / 无线快门线功能, 支持单张连拍延时 B 门等模式拍摄, 拍摄模式需先行在相机上设定实现此功能需要另购永诺 2.5mm 相机连接线, 根据不同相机型号选择不同的连接线 1. 如图所示, 单只收发器可作为有线快门线使用半按手中收发器的快门释放按钮进行对焦, 全按进行拍摄, 同时红色快门指示灯亮如图示, 在相机快门插座与收发器之间使用快门连接线连接中文 2. 作无线快门线使用时, 将一只收发器固定在相机热靴座上或固定在相机附近并与相机快门外接插座使用专用快门连接线连接, 另一只收发器置于手中半按手中收发器的快门释放按钮, 相机进行对焦动作完全按下释放按钮, 相机进行拍摄动作, 同时红色快门指示灯亮 9

27 功能延伸手持闪光灯遥控拍摄并同步引闪使用装上闪光灯的 RF-603 作为快门遥控并同步引闪, 本功能需另购永诺 2.5mm 快门连接线 1. 手持闪光灯安装在收发器的热靴座上作为发射器并锁紧闪光灯 2. 固定好相机 ( 如三脚架上 ), 使用另一只收发器装于相机机顶热靴座作接收器, 并通过专用快门连接线与相机的外接快门插座连接 3. 按下手中闪光灯上的收发器快门释放按钮可以对相机进行遥控拍摄操作, 闪光灯将与快门同步引闪该功能仅支持单张拍摄模式部分相机未找到焦点时, 即使收到拍摄信号也不会进行拍摄, 应将相机镜头对焦模式调整为手动 M 中文 10

28 中文 11 功能延伸无线遥控拍摄并同步触发闪光灯多个 RF-603 组合使用的例子, 实现此功能需另购永诺 2.5mm 相机快门线及多只 RF-603 收发器 1. 将一只收发器安装在相机机顶热靴座上, 并使用快门连接线与相机快门插座连接 2. 将闪光灯安装在收发器的热靴座上, 或与影室灯使用 PC 连接线连接 3. 手持一只收发器作为遥控发射器, 半按该收发器快门释放按钮, 受控相机相机进行对焦, 全按下收发器快门释放按钮时, 相机进行拍摄动作, 闪光灯同步引闪当多台相机及闪光灯与 RF-603 组合使时, 由于不同相机的反应时间有差异, 拍摄时间可能有微小差别部分相机未找到焦点时, 即使收到拍摄号也不会进行拍摄, 应将相机镜头对焦模式调整为手动 M

29 规格类型 :FSK 2.4GHz 无线遥控系统传送距离 :100 米频道 :16 个频道快门释放 : 半按, 全按快门接口 :2.5MM 接口影室灯接口 : 标准 PC 接口电池 :AAA 2 待机时间 :45 小时以上体积 ( 宽高深 ):37mm 30mm 81.5mm 深圳市永诺摄影器材股份有限公司地址 : 深圳市华强北路赛格科技园二栋西 A511 室电话 :(86) 售后服务 : 网址 : 中文 12

32 V2.01 Made in China

RF-603ii_Usermanual_cdr14_75115.cdr

RF-603ii_Usermanual_cdr14_75115.cdr RF-603 II Wireless Flash Trigger 无线引闪器 User Manual 使用手册 Contents Thank you for purchasing YongNuo products in advance. Please read this user manual carefully and learn how to use camera and flash before.