INSTRUCTIONS MANUAL SMOKE DETECTOR COLOR, B/W CCD CAMERA CONTENTS English / Chinese PREFACE SAFETY INSTRUCTIONS FUNCTION DESCRIPTION INSTALLATION SPECIFICATIONS PR0210SDE2 Thank you very much for purchasing our product. Please read the instructions manual thoroughly prior to proceeding to operate.
CONGRATULATIONS ON YOUR PURCHASE OF OUR CAMERA This product has been carefully inspected through rigid quality control before shipment. With reasonable installation and operation, it will provide years of reliable performance. Considering your investment, we understand you would like to know the full performance capability about the new product. Therefore, we need to recommand that you read the installation and operation manual throughly before attempting to install and operate the product. IMPORTANT INFORMATION BEFORE INSTALLATION PLEASE read and observe all instructions and warnings contained in this manual. Retain the original manual for future reference. When unpacking your new product, first please compare the received items with your order list, second check for damaged items. If there is anything missing or damage in evidence, please do not install or operate the product, then contact the dealer for assistance immediately. Never try to service this product by yourself. Opening the covers may expose you to dangerous power voltage or other hazards. For your protection, take a moment to complete the following product purchase information. The serial number of this product may be found on the cover of the unit. The serial number may be required by the factory when need service or technical support. Model NO. Serial NO. Purchase date
PREFACE Design for this series smoke detector series CCD camera is based on professional video system processing capability.interior key components adopt Japanese advanced charge coupled device (CCD) sensor and related peripheral IC. So the CCD camera has better performance such as high sensitivity, sharpness, premium fidelity and low noise. Also it has auto electronic shutter, backlight compensation and white balance function.(for Color Camera only) Because power design uses switching regulator, its operating current is only 200 ma for DC 12V model. Installation becomes more simple and easier. SAFETY INSTRUCTIONS 1.Never expose the unit to rain or moisture to avoid electric shock hazard. 2.All service or maintenance should be made by qualified service personnel. 3.Storage temperature-30 C~80 C. 4.All installation and service should conform to local codes. 5.Do not open the cover, it may expose you to power voltage and other hazard. 6.Do not place anything on the unit which maybe spill or fall into the unit. 7.The equipment has been tested and pass the CE standard, which are designed to provide reasonable protection against harmful interference and be insusceptible to other radiating interference when operated in commercial environment. Therefore, the equipment can t also generate and cause any interference to radio communication.
B/W FUNCTION DESCRIPTION VIDEO DC 12V IN Screw hole COLOR 360 deg Screw hole 1.Supply DC 12V to 1 power line and composite video signal from 2 video output. 2.Current 120 ma. 1.To screw board camera to installed object. 2.Supply DC 12V to power lines and connect video line to video output lines. * See sketch chart 1 power line red +12V, black ground. (with protection function of DC +/- polarity reverse) 2 video output white +, black - * Maybe burn out camera by mis-connection to excessive AC voltage. 3.Adjust focus length of lens to get clearer image. (To select suitable board lens depending on installed environment to get reasonable view angle). INSTALLATION NOTES : 1. Never supply AC or more than DC 15V to power line. 2. Supply stable power, otherwise easily produce noise. 3. Using 75 ohm input impedance for display unit. 4. Handle with care to wiring. 5. Don t repeat several times to plug-in and plug-out connector on camera board.
SPECIFICATIONS Model Image device Effective Picture elements Scanning system Synchronizing system Resolution Electronic shutter control Standard Resolution Color 1/4 interline CCD SENSOR NTSC 510(H)x492(V) PAL 500(H)x582(V) NTSC standard 525 lines,30 frames / sec PAL standard 625 lines,25 frames / sec Internal Gamma 0.45 More than 330 TV Lines (1/60~1/100000) NTSC (1/50~1/100000) PAL Minimum illumination 0.6 LUX./ F1.2 Video output level Video S/N ratio White balance Operating temperature Storage temperature Power requirements Power consumption Dimensions Weight A4CM 1Vp-p / 75 ohms,composite 47dB (AGC OFF) Auto-white balance (2000 K~10000 K) -10 C~50 C -30 C~80 C DC12V±1.2Vdc DC 12V Typical 98mA 130(Φ) 57mm (H) Model Image device Effective Picture elements Scanning system Synchronizing system Resolution Electronic shutter control Standard Resolution B/W 1 / 3 interline CCD SENSOR EIA 510(H)x492(V) CCIR 500(H)x582(V) EIA standard 525 lines,30 frames / sec CCIR standard 625 lines,25 frames / sec Internal More than 420 TV Lines (1/60~1/100000) EIA (1/50~1/100000) CCIR Gamma 0.45 Minimum illumination 0.1 LUX./ F1.2 Video output level 1Vp-p / 75 ohms,composite Video S/N ratio 48dB (AGC OFF) Operating temperature -10 C~50 C Storage temperature -30 C~80 C Power requirements DC12V±1.2Vdc Power consumption DC 12V Typical 100mA Dimensions 130(Φ) 57mm (H) Weight A3BM
Model Standard / High Resolution Color Image device 1 / 3 interline CCD SENSOR Effective Picture NTSC 510(H)x492(V) NTSC 768(H)x494(V) elements PAL 500(H)x582(V) PAL 752(H)x582(V) NTSC standard 525 lines,30 frames / sec Scanning system PAL standard 625 lines,25 frames / sec Synchronizing system Internal Resolution More than 330 TV Lines More than 460 TV Lines Electronic shutter (1/60~1/100000) NTSC control (1/50~1/100000) PAL Gamma 0.45 Minimum illumination 1 LUX./ F1.2 2.5 LUX./ F2.0 Video output level 1Vp-p / 75 ohms,composite Video S/N ratio 46dB (AGC OFF) White balance Auto-white balance (2000 K~10000 K) Operating temperature -10 C~50 C Storage temperature -30 C~80 C Power requirements DC12V±1.2Vdc Power consumption DC 12V Typical 150mA Dimensions 130(Φ) 57mm (H) Weight A3CM / A3CH Model Standard Resolution B/W Image device 1 / 3 interline CCD SENSOR EIA 512(H)x492(V) Effective Picture elements CCIR 512(H)x582(V) Scanning system EIA standard 525 lines,30 frames / sec CCIR standard 625 lines,25 frames / sec Synchronizing system Internal Resolution More than 420 TV Lines Electronic shutter control (1/60~1/100000) EIA (1/50~1/100000) CCIR Gamma 0.45 Mechanical iris No Minimum illumination 0.18 LUX./ F2.0 Video output level 1Vp-p / 75 ohms,composite Video S/N ratio 46dB (AGC OFF) White balance No Operating temperature -10 C~50 C Storage temperature -30 C~80 C Power requirements DC12V±1.2Vdc Power consumption DC 12V Typical 100mA Dimensions 130(Φ) 57mm (H) Weight B3BM
Model Standard / High Resolution Color Camera Image device 1/3 interline CCD SENSOR Picture elements NTSC 512(H) 492(V) NTSC 771(H) 492(V) PAL 512(H) 582(V) PAL 753(H) 582(V) NTSC standard 525 lines 30 frames / sec Scanning system PAL standard 625 lines 25 frames / sec Synchronizing system Internal Resolution More than 330 TV Lines More than 460 TV Lines Electronic shutter (1/60 1/100000) NTSC control (1/50 1/100000) PAL Gamma 0.45 Minimum illumination 1.0 LUX./ F1.2 2.0 LUX./ F1.2 Video output level 1Vp-p / 75 ohms Video S/N ratio 48dB (AGC OFF) White balance Auto Operating temperature -1050 Storage temperature -3080 Power requirements DC12V 10% Power consumption 120mA (MAX) Dimensions 130( ) 57mm (H) Weight C3CM / C3CH
C C D, CCD (), I C C C D ( ) 1. 2. 3.-30 ~ 80 4. 5. 6. 7. CE DC 12V IN 360 deg 1.DC 12V 1 2 2. 120 ma.
1. 2. * (1) : + 12V ( ) (2) : + * AC 3. ( ) : 1. AC DC15V 2. 3. 75 4. Standard Resolution Color 1 / 4 interline CCD SENSOR NTSC 510(H) 492(V) PAL 500(H) 582(V) NTSC standard 525 lines 30 frames / sec PAL standard 625 lines 25 frames / sec Internal More than 330 TV Lines (1/60 1/100000) NTSC (1/50 1/100000) PAL 0.45 0.6 LUX./ F1.2 1Vp-p / 75 ohms composite 47dB (AGC OFF) Auto-white balance (2000 K 10000 K) -1050-3080 DC12V±1.2Vdc DC 12V Typical 98mA 130(Φ) 57mm (H) A4CM 5.
Standard Resolution B/W 1 / 3 interline CCD SENSOR EIA 510(H) 492(V) CCIR 500(H) 582(V) EIA standard 525 lines 30 frames / sec CCIR standard 625 lines 25 frames / sec Internal More than 420 TV Lines (1/60 1/100000) EIA (1/50 1/100000) CCIR 0.45 0.1 LUX./ F1.2 1Vp-p / 75 ohms composite 48dB (AGC OFF) -1050-3080 DC12V 1.2Vdc DC 12V Typical 100mA 130( ) 57mm (H) A3BM Standard / High Resolution Color 1/3 interline CCD SENSOR NTSC 510(H) 492(V) PAL 500(H) 582(V) NTSC 768(H) 494(V) PAL 752(H) 582(V) NTSC standard 525 lines 30 frames / sec PAL standard 625 lines 25 frames / sec Internal More than 330 TV Lines More than 460 TV Lines (1/60 1/100000) NTSC (1/50 1/100000) PAL 0.45 1 LUX./ F1.2 2.5 LUX./ F2.0 1Vp-p / 75 ohms composite 46dB (AGC OFF) Auto-white balance (2000 K 10000 K) -1050-3080 DC12V±1.2Vdc DC 12V Typical 150mA 130(Φ) 57mm (H) A3CM / A3CH
Standard Resolution B/W 1/3 interline CCD SENSOR EIA 512(H) 492(V) CCIR 512(H) 582(V) EIA standard 525 lines 30 frames / sec CCIR standard 625 lines 25 frames / sec Internal More than 420 TV Lines (1/60 1/100000) EIA (1/50 1/100000) CCIR 0.45 No 0.18 LUX./ F2.0 1Vp-p / 75 ohms composite 46dB (AGC OFF) No -1050-3080 DC12V±1.2Vdc DC 12V Typical 100mA 130(Φ) 57mm (H) B3BM C3CM / C3CH Standard / High Resolution Color Camera 1 / 3 interline CCD SENSOR NTSC 512(H) 492(V) PAL 512(H) 582(V) NTSC 771(H) 492(V) PAL 753(H) 582(V) NTSC standard 525 lines 30 frames / sec PAL standard 625 lines 25 frames / sec Internal More than 330 TV Lines More than 460 TV Lines (1/60 1/100000) NTSC (1/50 1/100000) PAL 0.45 1.0 LUX./ F1.2 2.0 LUX./ F1.2 1Vp-p / 75 ohms 48dB (AGC OFF) Auto -1050-3080 DC12V 10% 120mA (MAX) 130( ) 57mm (H)