POPULAR SIZE NINGBO ACCOR BEARING CO.,LTD CAT.NO.2011SEP
Content 目录 Stainless steel Bearing 2 Deep groove stainless steel ball bearings 3-5 不锈钢深沟球轴承尺寸表 Angular contact stainless steel ball bearings 6-7 不锈钢角触球轴承尺寸表 Self-aligning stainless steel ball bearings 8-9 不锈钢调心球轴承尺寸表 Single direction thrust stainless steel ball bearings 10 不锈钢推力球轴承尺寸表 Insert stainless steel bearing 11 不锈钢外球面轴承尺寸表
Stainless steel bearings(440c) The high performance stainless steel bearings can provides not only with the cleanliness and corrosion resistance characteristic also with the high accuracy and excellent wear resistance compare to the high carbon chrome steel bearings. The rings and balls are made of the material as a standard structure of stainless steel bearing, The rings and balls are made of the material of AISI440C( 9Cr18Mo or 9Cr18), the cage and the framework of seal adoption the AI304 or AI316, production accuracy could reach ISO standard ABEC-1 and above, and the vibration level reach Z1 grade and above. Austenite stainless steel bearings We also can offer non-standard stainless steel bearings to meet some special type needs in engineering. Compare to high carbon chrome martensite stainless steel bearing, Austenite stainless steel bearings have even more excellent corrosion and wear resistance, magnetism resistance. The whole Austenite stainless steel bearings are made of AISI SUS316L(316)or SUS304 ( including inside and outside rings, balls and cage). Austenite stainless steel bearings can t harden completely by heat treatment, so it should not choose for heaver load or higher speed. Stainless plummer block and stainless insert bearings Stainless Bearing Units have some advantages, Such as automatic adjustment, Repeated lubrication, Dustproof and convenience for fixing and disassembly. It is widely used in various mechanical equipments and conveying device. Stainless Plummer blocks are specially designed to meet particular engineering demand for food. Medical and chemical industry. Which have some excellence such as cleanness, Anti-corrosion etc. Bearing housing is made of AISIS304 and the insert bearings are made of AISI SUS440C, Specially AISI SUS316 also could be used. 高性能的在清洁耐蚀的基础上同样提供可与高碳铬钢媲美的高精度及耐磨性, 作为标准结构的, 套圈及滚动体材料采用 AISI SUS440C(9Cr18Mo 或 9Cr18) 经真空淬回火处理, 保持架及密封圈骨架材料采用 AISI304 或 AISI316, 精度达 ISO 标准 ABEC-1 以上 振动等级 Z1 组及以上 奥氏体我们同样提供非标准形式以满足工程上的特种需求, 相比较高碳铬马氏体不锈钢 ( 如 440C,420 等 ), 奥氏体不锈钢具有更优良的耐腐蚀性能及抗磁性 奥氏体整体采用 AISI SUS316L(316) 或 SUS304 材料制作 ( 包括内外圈, 球, 及保持架 ) 因奥氏体不锈钢无法整体淬硬, 故该轴承不适用于较大负荷及较高转速 座及不锈钢外球面轴承 带座外球面轴承具有自动调心, 多次重复润滑, 防尘密封良好, 安装拆卸方便等优点 被广泛用于各种机械设备及传送装置 不锈钢带座轴承是专门开发用以满足食品 医疗 化工等行业的特殊需求 在保证普通铬钢带座轴承耐磨性能的同时, 同样具备耐腐蚀 清洁的优点 轴承座采用 AISISUS304 材料, 外球面轴承使用 ASIAUS440C 材料 特殊用途也可使用 AISISUS316 材料 2
Deep groove stainless steel ball bearings Mounting dimensions(mm) mass Bearing No. da da Da ra (kg) d D B r (min) min max max max (refer) SS684 9 2.5 0.1 4.8 / 8.2 0.1 0.0001 SS694 11 4 0.15 5.2 / 9.8 0.15 0.0003 SS604 4 12 4 0.2 5.6 / 10.4 0.2 0.0004 SS624 13 5 0.2 5.6 / 11.4 0.2 0.0006 SS634 16 5 0.3 6 / 14 0.3 0.001 SS685 11 3 0.15 6.2 / 9.8 0.15 0.0002 SS695 13 4 0.2 6.6 / 11.4 0.2 0.0005 SS605 5 14 5 0.2 6.6 / 12.4 0.2 0.0007 SS625 16 5 0.3 7 / 14 0.3 0.001 SS635 19 6 0.3 7 / 17 0.3 0.0016 SS686 13 3.5 0.15 7.2 / 11.8 0.15 0.0004 SS696 15 5 0.2 7.6 / 13.4 0.2 0.0007 SS606 6 17 6 0.3 8 / 15 0.3 0.0011 SS626 19 6 0.3 8 / 17 0.3 0.0016 SS636 22 7 0.3 8 / 20 0.3 0.0027 SS687 14 3.5 0.15 8.2 / 12.8 0.15 0.0004 SS697 17 5 0.3 9 / 15 0.3 0.001 SS607 7 19 6 0.3 9 / 17 0.3 0.0015 SS627 22 7 0.3 9 / 20 0.3 0.0024 SS637 26 9 0.3 9 / 24 0.3 0.0046 SS688 16 4 0.2 9.6 / 14.4 0.2 0.0006 SS698 19 6 0.3 10 / 17 0.3 0.0014 SS608 8 22 7 0.3 10 / 20 0.3 0.0023 SS628 24 8 0.3 10 / 22 0.3 0.0033 SS638 28 9 0.3 10 / 26 0.3 0.0054 SS689 17 4 0.2 10.6 / 15.4 0.2 0.0007 SS699 20 6 0.3 11 / 18 0.3 0.0016 SS609 9 24 7 0.3 11 / 22 0.3 0.0028 SS629 26 8 0.3 11 / 24 0.3 0.0038 SS639 30 10 0.6 13 / 26 0.6 0.007 SS6800 19 5 0.3 12 12 17 0.3 0.001 SS6900 22 6 0.3 12 12.5 20 0.3 0.0017 SS6000 10 26 8 0.3 12 13 24 0.3 0.0035 SS6200 30 9 0.6 14 16 26 0.6 0.006 SS6300 35 11 0.6 14 16.5 31 0.6 0.01 SS6801 21 5 0.3 14 14 19 0.3 0.0012 SS6901 24 6 0.3 14 14.5 22 0.3 0.0019 SS16001 28 7 0.3 14 / 26 0.3 0.004 12 SS6001 28 8 0.3 14 15.5 26 0.3 0.004 SS6201 32 10 0.6 16 17 28 0.6 0.007 SS6301 37 12 1 17 18 32 1 0.012 3
Mounting dimensions(mm) mass Bearing No. da da Da ra (kg) d D B r (min) min max max max (refer) SS6802 24 5 0.3 17 17 22 0.3 0.0013 SS6902 28 7 0.3 17 17 26 0.3 0.003 SS16002 32 8 0.3 17 / 30 0.3 0.005 15 SS6002 32 9 0.3 17 19 30 0.3 0.006 SS6202 35 11 0.6 19 20.5 31 0.3 0.009 SS6302 42 13 1 20 22.5 37 1 0.016 SS6803 26 5 0.3 19 19 24 0.3 0.0013 SS6903 30 7 0.3 19 19.5 28 0.3 0.0033 SS16003 35 8 0.3 19 / 33 0.3 0.006 SS6003 17 35 10 0.3 19 21.5 33 0.3 0.008 SS6203 40 12 0.6 21 23.5 36 0.6 0.013 SS6303 47 14 1 22 25.5 42 1 0.022 SS6403 62 17 1.1 23.5 / 55.5 1 0.052 SS6804 32 7 0.3 22 22.5 30 0.3 0.003 SS6904 37 9 0.3 22 24 35 0.3 0.007 SS16004 42 8 0.3 22 / 40 0.3 0.009 SS6004 20 42 12 0.6 24 25.5 38 0.6 0.013 SS6204 47 14 1 25 26.5 42 1 0.021 SS6304 52 15 1.1 26.5 28 45.5 1 0.028 SS6404 72 19 1.1 26.5 / 65.5 1 0.08 SS6805 37 7 0.3 27 27 35 0.3 0 SS6905 42 9 0.3 27 28.5 40 0.3 0.01 SS16005 47 8 0.3 27 / 45 0.3 0.011 SS6005 25 47 12 0.6 29 30 43 0.6 0.015 SS6205 52 15 1 30 32 47 1 0.025 SS6305 62 17 1.1 31.5 36 55.5 1 0.045 SS6405 80 21 1.5 33 / 72 1.5 0.102 SS6806 42 7 0.3 32 32 50 1 0.005 SS6906 47 9 0.3 32 34 57 1 0.01 SS16006 55 9 0.3 32 42.5 65.5 1 0.017 SS6006 30 55 13 1 35 36.5 53 1 0.022 SS6206 62 16 1 35 38.5 60 1 0.038 SS6306 72 19 1.1 36.5 42.5 68.5 1 0.066 SS6406 90 23 1.5 54 / 82 2 0.14 SS6807 47 7 0.3 37 37 45 0.3 0.005 SS6907 55 10 0.6 39 39 51 0.6 0.014 SS16007 62 9 0.3 37 / 60 0.3 0.021 SS6007 35 62 14 1 40 41.5 57 1 0.029 SS6207 72 17 1.1 41.5 44.5 65.5 1 0.055 SS6307 80 21 1.5 43 47 72 1.5 0.089 SS6407 100 25 1.5 43 / 92 1.5 0.18 SS6808 52 7 0.3 42 42 50 0.3 0.006 SS6908 62 12 0.6 44 46 58 0.6 0.022 SS16008 68 9 0.3 42 / 66 0.3 0.025 SS6008 40 68 15 1 45 47.5 63 1 0.037 SS6208 80 18 1.1 46.5 50.5 73.5 1 0.07 SS6308 90 23 1.5 48 53 80 1.5 0.12 SS6408 110 27 2 49 / 101 2 0.24 SS6809 58 7 0.3 47 47.5 56 0.3 0.007 SS6909 68 12 0.6 49 50 64 0.6 0.024 SS16009 75 10 0.6 49 / 71 0.6 0.032 SS6009 45 75 16 1 50 53.5 70 1 0.046 SS6209 85 19 1.1 51.5 55.5 78.5 1 0.081 SS6309 100 25 1.5 53 61.5 92 1.5 0.16 SS6409 120 29 2 54 / 111 2 0.29 4
Mounting dimensions(mm) mass Bearing No. da da Da ra (kg) d D B r (min) min max max max (refer) SS6810 65 7 0.3 52 52.5 63 0.3 0.01 SS6910 72 12 0.6 54 55 68 0.6 0.026 SS16010 80 10 0.6 54 / 76 0.6 0.034 SS6010 50 80 16 1 55 58.5 75 1 0.05 SS6210 90 20 1.1 56.5 60 83.2 1 0.088 SS6310 110 27 2 59 68 101 2 0.2 SS6410 130 31 2.1 61 / 119 2 0.36 SS6811 72 9 0.3 57 59 70 0.3 0.016 SS6911 80 13 1 60 61.5 75 1 0.036 SS16011 90 11 0.6 59 / 86 0.6 0.049 SS6011 55 90 18 1.1 61.5 64 83.5 1 0.073 SS6211 100 21 1.5 63 66.5 92 1.5 0.12 SS6311 120 29 2 64 72.5 111 2 0.26 SS6411 140 33 2.1 66 / 129 2 0.44 SS6812 78 10 0.3 62 64 76 0.3 0.02 SS6912 85 13 1 65 66 80 1 0.037 SS16012 95 11 0.6 64 / 91 0.6 0.054 SS6012 60 95 18 1.1 66.5 69 88.5 1 0.079 SS6212 110 22 1.5 68 74.5 102 1.5 0.15 SS6312 130 31 2.1 71 79 119 2 0.33 SS6412 150 35 2.1 71 139 2 0.53 SS6813 85 10 0.6 69 69 81 0.6 0.025 SS6913 90 13 1 70 71.5 85 1 0.04 SS16013 100 11 0.6 69 / 96 0.6 0.06 65 SS6013 100 18 1.1 71.5 73 93.5 1 0.08 SS6213 120 23 1.5 73 80 112 1.5 0.19 SS6313 140 33 2.1 76 85.5 129 2 0.41 SS6814 90 10 0.6 74 74.5 86 0.6 0.03 SS6914 100 16 1 75 77.5 95 1 0.07 SS16014 110 13 0.6 74 / 106 0.6 0.08 70 SS6014 110 20 1.1 76.5 80.5 103.5 1 0.12 SS6214 125 24 1.5 78 84 117 1.5 0.21 SS6314 150 35 2.1 81 92 139 2 0.49 SS6815 95 10 0.6 79 79.5 91 0.6 0.029 SS6915 105 16 1 80 82 100 1 0.07 SS16015 75 115 13 0.6 79 / 111 0.6 0.089 SS6015 115 20 1.1 81.5 85.5 108.5 1 0.12 SS6215 130 25 1.5 83 90 122 1.5 0.23 SS6816 100 10 0.6 84 84.5 96 0.6 0.03 SS6916 110 16 1 85 87.5 105 1 0.075 SS16016 80 125 14 0.6 84 / 121 0.6 0.12 SS6016 125 22 1.1 86.5 91 118.5 1 0.17 SS6216 140 26 2 89 95.5 131 2 0.27 SS6817 110 13 1 90 90.5 105 1 0.051 SS6917 120 18 1.1 91.5 94.5 113.5 1 0.11 SS16017 85 130 14 0.6 89 / 126 0.6 0.13 SS6017 130 22 1.1 91.5 96 123.5 1 0.18 SS6217 150 28 2 94 102 141 2 0.34 SS6818 115 13 1 95 95.5 110 1 0.05 SS6918 125 18 1.1 96.5 98.5 118.5 1 0.11 90 SS16018 140 16 1 95 / 135 1 0.17 SS6018 140 24 1.5 98 103 132 1.5 0.23 5
Angular contact stainless steel ball bearings Mounting dimensions(mm) Mass Bearing No. R R1 da Da ra d D B (min) r1 (min) min max max (kg)(refer) SS7900 22 6 0.3 0.15 12.5 19.5 0.3 0.001 SS7000 26 8 0.3 0.15 12.5 23.5 0.3 0.003 10 SS7200 30 9 0.6 0.3 15 25 0.6 0.004 SS7300 35 11 0.6 0.3 15 30 0.6 0.007 SS7901 24 6 0.3 0.15 14.5 21.5 0.3 0.001 SS7001 28 8 0.3 0.15 14.5 25.5 0.3 0.003 12 SS7201 32 10 0.6 0.3 17 27 0.6 0.005 SS7301 37 12 1 0.6 18 31 1 0.008 SS7902 28 7 0.3 0.15 17.5 25.5 0.3 0.002 SS7002 32 9 0.3 0.15 17.5 29.5 0.3 0.004 15 SS7202 35 11 0.6 0.3 20 30 0.3 0.006 SS7302 42 13 1 0.6 21 36 1 0.011 SS7903 30 7 0.3 0.15 19.5 27.5 0.3 0.002 SS7003 35 10 0.3 0.15 19.5 32.5 0.3 0.006 17 SS7203 40 12 0.6 0.3 22 35 0.6 0.009 SS7303 47 14 1 0.6 23 41 1 0.016 SS7904 37 9 0.3 0.15 22.5 34.5 0.3 0.005 SS7004 42 12 0.6 0.3 25 37 0.6 0.009 20 SS7204 47 14 1 0.6 26 41 1 0.015 SS7304 52 15 1.1 0.6 27 45 1 0.02 SS7905 42 9 0.3 0.15 27.5 39.5 0.3 0.006 SS7005 47 12 0.6 0.3 30 42 0.6 0.011 25 SS7205 52 15 1 0.6 31 46 1 0.018 SS7305 62 17 1.1 0.6 32 55 1 0.032 SS7906 47 9 0.3 0.15 32.5 44.5 1 0.007 SS7006 55 13 1 0.6 36 49 1 0.016 30 SS7206 62 16 1 0.6 36 56 1 0.027 SS7306 72 19 1.1 0.6 37 65 1 0.048 SS7907 55 10 0.6 0.3 40 50 0.6 0.01 SS7007 62 14 1 0.6 41 56 1 0.022 35 SS7207 72 17 1.1 0.6 42 65 1 0.039 SS7307 80 21 1.5 1 44 71 1.5 0.065 SS7908 62 12 0.6 0.3 45 57 0.6 0.016 SS7008 68 15 1 0.6 46 62 1 0.027 40 SS7208 80 18 1.1 0.6 47 73 1 0.05 SS7308 90 23 1.5 1 49 81 1.5 0.088 6
Mounting dimensions(mm) Mass Bearing No. R R1 da Da ra d D B (min) r1 (min) min max max (kg)(refer) SS7909 68 12 0.6 0.3 50 63 0.6 0.017 SS7009 75 16 1 0.6 51 69 1 0.034 45 SS7209 85 19 1.1 0.6 52 78 1 0.057 SS7309 100 25 1.5 1 54 91 1.5 0.115 SS7910 72 12 0.6 0.3 55 67 0.6 0.018 SS7010 80 16 1 0.6 56 74 1 0.036 50 SS7210 90 20 1.1 0.6 57 83 1 0.063 SS7310 110 27 2 1 60 100 2 0.147 SS7911 80 13 1 0.6 61 74 1 0.027 SS7011 90 18 1.1 0.6 62 83 1 0.052 55 SS7211 100 21 1.5 1 64 91 1.5 0.086 SS7311 120 29 2 1 65 110 2 0.188 SS7912 85 13 1 0.6 66 79 1 0.027 SS7012 95 18 1.1 0.6 67 88 1 0.057 60 SS7212 110 22 1.5 1 69 101 1.5 0.108 SS7312 130 31 2.1 1.1 72 118 2 0.237 SS7913 90 13 1 0.6 71 84 1 0.031 SS7013 100 18 1.1 0.6 72 93 1 0.061 65 SS7213 120 23 1.5 1 74 111 1.5 0.138 SS7313 140 33 2.1 1.1 77 128 2 0.291 SS7914 100 16 1 0.6 76 94 1 0.048 SS7014 110 20 1.1 0.6 77 103 1 0.084 70 SS7214 125 24 1.5 1 79 116 1.5 0.151 SS7314 150 35 2.1 1.1 82 138 2 0.355 SS7915 105 16 1 0.6 81 99 1 0.05 SS7015 75 115 20 1.1 0.6 82 108 1 0.09 SS7215 130 25 1.5 1 84 121 1.5 0.165 SS7916 110 16 1 0.6 86 104 1 0.054 SS7016 80 125 22 1.1 0.6 87 118 1 0.12 SS7216 140 26 2 1 90 130 2 0.196 SS7017 130 22 1.1 0.6 92 123 1 0.127 85 SS7217 150 28 2 1 95 140 2 0.242 SS7918 125 18 1.1 0.6 97 118 1 0.081 90 SS7018 140 24 1.5 1 99 131 1.5 0.165 SS7919 130 18 1.1 0.6 102 123 1 0.083 95 SS7019 145 24 1.5 1 104 136 1.5 0.171 SS7920 140 20 1.1 0.6 107 133 1 0.115 100 SS7020 150 24 1.5 1 109 141 1.5 0.178 SS7921 105 145 20 1.1 0.6 112 138 1 0.118 SS7922 110 150 20 1.1 0.6 117 143 1 0.124 7
Self-aligning stainless steel ball bearings Bearing No Mounting dimensions (mm) Mass da Da ra (kg) (refer) d D B r min) min max max SS135 5 19 6 0.3 7 17 0.3 0.001633 SS126 6 19 6 0.3 8 17 0.3 0.001633 SS127 7 22 7 0.3 9 20 0.3 0.002567 SS108 8 22 7 0.3 10 20 0.3 0.002567 SS129 9 26 8 0.6 13 22 0.6 0.003967 SS1200 30 9 0.6 14 26 0.6 0.006067 SS2200 30 14 0.6 14 26 0.6 0.0084 10 SS1300 25 11 0.6 14 31 0.6 0.0105 SS2300 25 17 0.6 14 31 0.6 0.015167 SS1201 32 10 0.6 16 28 0.6 0.007233 SS2201 32 14 0.6 16 28 0.6 0.009567 12 SS1301 37 12 1 17 32 1 0.012133 SS2301 37 17 1 17 32 1 0.017033 SS1202 35 11 0.6 19 31 0.6 0.008867 SS2202 35 14 0.6 19 31 0.6 0.010733 15 SS1302 42 13 1 20 37 1 0.0168 SS2302 42 17 1 20 37 1 0.020533 SS1203 40 12 0.6 21 36 0.6 0.013067 SS2203 40 16 0.6 21 36 0.6 0.015867 17 SS1303 47 14 1 22 42 1 0.023333 SS2303 47 19 1 22 42 1 0.028 SS1204 47 14 1 25 42 1 0.021 SS2204 47 18 1 25 42 1 0.025667 20 SS1304 52 15 1.1 26.5 45.5 1 0.030333 SS1304 52 21 1.1 26.5 45.5 1 0.037333 SS1205 52 15 1 30 47 1 0.025667 SS2205 52 18 1 30 47 1 0.030333 25 SS1305 62 17 1.1 31.5 55.5 1 0.046667 SS2305 62 24 1.1 31.5 55.5 1 0.060667 SS1206 62 16 1 35 57 1 0.039667 SS2206 62 20 1 35 57 1 0.046667 30 SS1306 72 19 1.1 36.5 65.5 1 0.07 SS2306 72 27 1.1 36.5 65.5 1 0.088667 SS1207 72 17 1.1 41.5 65.5 1 0.058333 SS2207 72 23 1.1 41.5 65.5 1 0.072333 35 SS1307 80 21 1.5 43 72 1.5 0.091 SS2307 80 31 1.5 43 72 1.5 0.121333 8
Bearing No Mounting dimensions (mm) Mass da Da ra (kg) (refer) d D B r min) min max max SS1208 80 18 1.1 46.5 73.5 1 0.074667 SS2208 80 23 1.1 46.5 73.5 1 0.091 40 SS1308 90 23 1.5 48 82 1.5 0.128333 SS2308 90 33 1.5 48 82 1.5 0.165667 SS1209 85 19 1.1 51.5 78.5 1 0.084 SS2209 85 23 1.1 51.5 78.5 1 0.098 45 SS1309 100 25 1.5 53 92 1.5 0.172667 SS2309 100 36 1.5 53 92 1.5 0.221667 SS1210 90 20 1.1 56.5 83.5 1 0.093333 SS2210 90 23 1.1 56.5 83.5 1 0.105 50 SS1310 110 27 2 59 101 2 0.217 SS2310 110 40 2 59 101 2 0.294 SS1211 100 21 1.5 63 92 1.5 0.126 SS2211 100 25 1.5 63 92 1.5 0.144667 55 SS1311 120 29 2 64 111 2 0.284667 SS2311 120 43 2 64 111 2 0.378 SS1212 110 22 1.5 68 102 1.5 0.161 SS2212 110 28 1.5 68 102 1.5 0.196 60 SS1312 130 31 2.1 71 119 2 0.352333 SS2312 130 46 2.1 71 119 2 0.466667 SS1213 120 23 1.5 73 112 1.5 0.205333 SS2213 120 31 1.5 73 112 1.5 0.261333 65 SS1313 140 33 2.1 76 129 2 0.438667 SS2313 140 48 2.1 76 129 2 0.578667 SS1214 125 24 1.5 78 117 1.5 0.226333 SS2214 125 31 1.5 78 117 1.5 0.273 70 SS1314 150 35 2.1 81 139 2 0.536667 SS2314 150 51 2.1 81 139 2 0.758333 SS1215 130 25 1.5 83 122 1.5 0.245 75 SS2215 130 31 1.5 83 122 1.5 0.291667 SS1216 140 26 2 89 131 2 0.298667 80 SS2216 140 33 2 89 131 2 0.361667 SS1217 150 28 2 94 141 2 0.371 85 SS2217 150 36 2 94 141 2 0.452667 9
Single direction thrust stainless steel ball bearings Mounting dimensions (mm) mass Bearing No d1 D1 (kg) d D T r (min) max min (refer) SS51100 24 9 0.3 24 11 0.004 10 SS51200 26 11 0.6 26 12 0.005 SS51101 26 9 0.3 26 13 0.004 12 SS51201 28 11 0.6 28 14 0.006 SS51102 28 9 0.3 28 16 0.004 15 SS51202 32 12 0.6 32 17 0.008 SS51103 30 9 0.3 30 18 0.004 17 SS51203 35 12 0.6 35 19 0.009 SS51104 35 10 0.3 35 21 0.007 20 SS51204 40 14 0.6 40 22 0.014 SS51105 42 11 0.6 42 26 0.01 25 SS51205 47 15 0.6 47 27 0.02 SS51106 47 11 0.6 47 32 0.011 30 SS51206 52 16 0.6 52 32 0.026 SS51107 52 12 0.6 52 37 0.014 35 SS51207 62 18 1 62 37 0.037 SS51108 60 13 0.6 60 42 0.021 40 SS51208 68 19 1 68 42 0.049 SS51109 65 14 0.6 65 47 0.026 45 SS51209 73 20 1 73 47 0.056 SS51110 70 14 0.6 70 52 0.028 50 SS51210 78 22 1 78 52 0.068 SS51111 78 16 0.6 78 57 0.04 55 SS51211 90 25 1 90 57 0.107 SS51112 85 17 1 85 62 0.051 60 SS51212 95 26 1 95 62 0.121 SS51113 90 18 1 90 67 0.058 65 SS51213 100 27 1 100 67 0.135 SS51114 95 18 1 95 72 0.063 70 SS51214 105 27 1 105 72 0.142 SS51115 100 19 1 100 77 0.07 75 SS51215 110 27 1 110 77 0.152 SS51116 105 19 1 105 82 0.075 80 SS51216 115 28 1 115 82 0.168 SS51117 110 19 1 110 87 0.079 85 SS51217 125 31 1 125 88 0.219 10
Insert stainless steel bearing Boundary dimensions (mm) Mass Bearing No d D B S C r/min G ds (kg) (refer) SSUC201 12 47 31 12.7 17 0.6 4.5 M6 x 1 0.16 0.09 SSUC202 15 47 31 12.7 17 0.6 4.5 M6 x 1 0.15 0.08 SSUC203 17 47 31 12.7 17 0.6 4.5 M6 x 1 0.14 0.07 SSUC204 20 47 31 12.7 17 1 4.5 M6 x 1 0.12 0.07 SSUC205 25 52 34.1 14.3 17V 1 5 M6 x 1 0.17 0.09 SSUC206 30 62 38.1 15.9 19 1 5 M6 x 1 0.27 0.14 SSUC207 35 72 42.9 17.5 20 1.1 6 M8 x 1 0.40 0.21 SSUC208 40 80 49.2 19 21 1.1 8 M8 x 1 0.54 0.29 SSUC209 45 85 49.2 19 22 1.1 8 M8 x 1 0.57 0.30 SSUC210 50 90 51.6 19 24 1.1 9 M10 x 1 0.64 0.34 SSUC211 55 100 55.6 22.2 25 1.5 9 M10 x 1 0.89 0.48 SSUC212 60 110 65.1 25.4 27 1.5 10 M10 x 1 1.20 0.64 SSUC213 65 120 65.1 25.4 27 1.5 10 M10 x 1 1.51 0.80 SSUC214 70 125 74.6 30.2 29 1.5 12 M12 x 1.25 1.68 0.89 SSUC215 75 130 77.8 33.3 30 1.5 12 M12 x 1.25 1.86 0.99 SSUC216 80 140 82.6 33.3 33 2 14 M12 x 1.25 2.17 1.16 SSUC217 85 150 85.7 34.1 36 2 14 M12 x 1.25 2.62 1.39 SSUC218 90 160 96 39.7 37 2 14 M12 x 1.25 3.31 1.76 SSUC220 100 180 108 42 41 2 14 M12 x 1.25 3.46 1.85 11