-V7R Page : Features & pplication : Product Structure : * SMD Drum he for power line / signal line of various size SMD DIP Shield Unshield * ow Profile even 3x3x1.4 mm and low cost * To help you go pass the E/F standard. * Mobil Device / Handheld Device / owprofile Device / Panel... Part No Example : P - K --------- ---- --- --- ------ --- --- 1 3 4 5 6 7 1. Series :. Dimension ode : 5 X 5 X 3 mm 3. P = Pb < 00 ppm 4. Unique Spec : [ ] ow Profile [ G ] 封 EPOXY 膠 [ H ] Wire grade, H = 180 o [ M ] 封 EMI 膠 5. Value, Ex : = 47 uh 6. Tolerance : K = %, M = 0% 7. S = ustomer Design 005 RoHS ompliant - SGS ertified Result 鉛 鎘 汞 六價鉻 溴化聯苯 Pb d Hg r+6 P <00ppm ND ND ND ND DIMENSION : [ mm ] Front View Side View ottom View Recommend Pad ayout 0 TYPE +/-0.3 +/-0.3 +/-0.3 D [ref.] E [ref.] F [ref.] G [ref.] [max.] 1.0 1.45 1.60 1.0 1.45 3.00 1.0 1.45 4.00 1.0 4.0 1.95 5 5.0.50 1.0 5.60.60 5.0 [max.] 1.0 5.60.60 5.0 1.30 5.60.55 1. 7.80 7.00. 7.40 3.5 1.70 7.80 7.00. 7.40 3.5 1.70 4.00+/-0.4 9.00 4.0. 9.60 4.45 1.70 5.00+/-0.4 9.00.50 9.60 4.5. 7.00+/-0.4 9.00 7.50 [max.]. 9.60 4.45 1.70 D E F F G 溴化聯苯醚 PDE ND Test Equipment : * HP484, HP4841 -, ID, Q, RD * HP87D NETWORK NYZER - SRF Schematic: Standard tmospheric onditions : mbient Temp : 0 +/- 15 o Relative Humidity : 65 +/- 0% If there may be any doubt on the result, measurement shall be made within the following limits : mbient Temp : 5 +/- 5 o Relative Humidity : +/- % Operatiing & Storage ondition : OPERTING TEMP : -40 ~ +85 o STORGE TEMP : -40 ~ +85 o STORGE IFE TIME : 1 MONTH @5 o, RH 65% ttention & aution : Please avoid following matters: * Splashing water or salt water * Toxic Gas (Hydrogen sulfide, Sulfurous acid, hlorine, mmonia) * Vibrations or shocks which exced the specified condition * Dew condenses * Please be careful for the stress to this product by board flexure or something after the mounting. Recommand Reflow urve (TIME:Second) o (Temp- ) 300 0 50 ead Solder: point =30, =35 ead Free Solder: point =45, =55 60sec 0 0 sec sec 0sec (Max) pre-heating sec soldering Notice: Iron Soldering: 3 Seconds Max. @60 o 60-80sec natural-cooling Technology o., td. TE:886--871808 FX:886--871908 Page :
-V7R Page : 3 ODE (uh) DR (ohm) (max) / D.. urrent (mp) (Max.) 3 5 R 0.1 0.00 R50 0.5 0.00 4.0 0.011 R8 0.8 0.040 1R0 1.0 0.048 1.60 0.060 0.035 3.34 0.033 0.050 4.0 1R 1. 0.044 3. 0.035 3.60 0.060 4.00 1R4 1.4 0.045 3.01 1R5 1.5 0.0 1.55 0.045 3.01 0.039 0.060 3.70 1R8 1.8 0.0.68 0.04.91 0.070 R. 0.078 1.47 0.1 1.05 0.059.35 0.047.60 R7.7 0.077.01 0.05. 0.0.70 3.3 0.16 1.34 0.098 1.83 0.058.15 3R6 3.6 3R9 3.9 0.0 1.4 0.117 1.64 0.076 1.98 0.0.00 4R7 4.7 0.158 1. 0. 0. 0.137 1.50 0.094 1.70 1.80 5R6 5.6 0.186 1.09 0 0.65 0.157 1.36 0.1 1.60 0.160 1.50 6R8 6.8 0.13 0.96 0 0.56 0.196 1. 0.117 1.41 0.170 8R 8. 0.38 0.84 0.380 0.50 0.30 1.09 0.13 1.6 0.00 1.30 0 7 0.70 0.440 0.45 0.86 0.95 0.18 1.15 0.30 1. 10 1 0.37 0.65 0.500 0. 0.3 0.88 0. 1.05 0 1.05 15 0.466 0.59 0.6 0.39 0.398 0.8 0.35 0.9 0 180 18 0.515 0. 0.0 0.3 0.50 0.76 0.338 0.84 0 0.90 0 0.656 0.48 0.9 0.8 0.660 0.63 0.378 0.76 0 0.85 70 7 0.774 0. 1. 0.6 0.760 0.6 0.5 0.71 0.500 0. 33 1.01 0.37 1. 0.870 0.56 0.0 0.64 0.550 0.70 39 1.1 0.3 1.880 0.3 1.0 0.51 0.587 0.59 0.650 0.60 47 1.509 0.6.60 0.1 1.50 0.47 0.844 0. 0.0 0.55 56 1.6 0.4.690 0.0 1.590 0.4 0.937 0.50 0.950 0.50 68 1.919 0.3 3.180 0.18 1. 0.38 1.117 0.46 0.45 8.644 0.1 3.670 0.16.440 0.34 1.180 0. 0 1 0.870 0.19 4.940 0..840 0. 1.190 0.41 1.0 11 10 4.084 0.17 5.350 0.1 3.190 0.8 1.0 0.38.000 151 4.774 0.16 4.00 0.16 0.600 0. 181 180 5.699 0. 5.1 0.15 1.850 0. 0 0.0 1 0 9.000 0.1 7.3 0..156 0.9 3.700 0.18 71 70 8.40 0.1.890 0.6 4.000 0.19 3.190 0. 3.760 0.0 4.00 0.0 391 0 0.17 471 7.00 0.15 1 0 561 681 81 00 34.000 0.07 11.500 0.08 1 100 30 0.057 15 0 18 1800 0 000 5 500 30 3000 00 3 000 1 00 Measuring Freq. : 0KHz, V / Test Instrument: HP484 Value Tolerance : <1.0 uh = 30% ; 1.0~8.uH = 0% ; uh~00uh = % / 0% D.. urrent : ase on drop % max. & Temp. rise up 40 deg. max. 0.040 0.050 0.060 0.070 0.090 0.0 0.130 0.180 0.0 0.40 0 0 0.0 0.500 0.600 0 0.900 0 1.300 1.500.000.500 0 4.00 0 6.950 17.500 7.0 4.0 4. 3.70.80.60.50.0.00 1.80 1. 1.70 1.60 1.50 1. 0.90 0.85 0.65 0.60 0.58 0. 0.41 0.38 0.8 0.0 7.15m 0.00 0.05 0.05 0.07 0.034 0.036 0.040 0.068 0.0 0.0 0.180 0.00 0.30 0.30 0.370 0.40 0.460 0.600 0.700 0.930 1.0 1.380 1.570.00.800 0 0 6.40 9.5.50 1.44 1.30 1.3 1.11 0.97 0.88 0.7 0.68 0.61 0.58 0.5 0.48 0.38 0.3 0.0 0.18 0.15 Technology o., td. TE:886--871808 FX:886--871908 Page : 3
-V7R Page : 4 ODE (uh) DR (ohm) (max) / D.. urrent (mp) (Max.) 4 5 7 R 0.1 1R0 1.0 0.018 7.00 0.013 7.50 0.01 8.70 1R 1. 0.015 7.0 0.0 0.009 1R4 1.4 0.016 7.48 1R5 1.5 0.00 6.00 0.016 6.50 0.016 7.48 0.01 1R8 1.8 0.00 6.00 0.018 6.80 R. 0.03 0.03 5.30 0.00 5.40 0.016 R7.7 0.04 3.3 0.05 4.00 0.08 0.08.85 0.018 3R9 3.9 4.0.80 4R7 4.7 0.039 0.045 4.00 0.038. 0.00 5R6 5.6 0.048 3.60 0.040.70 6R8 6.8 0.040.80 0.058 0.04.65 0.040 8R 8. 0.070.80 0.048.60 0 1.44 0.070.30 0.050.38 0.060 10 1 0.090 1.39.00 0.060.13 0.070 15 0.0 1.4 0.090 1.80 0.070 1.87 0.070 180 18 0.1 1.1 0.0 1.60 0. 0 0.130 1.07 0.1 1.50 0.090 1.60 70 7 0.94 1.30 0.0 1.44 0.0 33 0.170 0.85 0.130 1.0 1.6 0.1 39 0.0 0.74 0.160 1. 1.0 47 0 0.68 0.180 1. 0.170 1. 0.0 56 0.64 0.40 0.94 0.00 1.01 0.190 68 0. 0.59 0.85 0.0 0.91 0. 8 0.4 0. 0.370 0.78 0 0.85 1 0 0.480 0.51 0.0 0.7 0.340 0.74 0.340 11 10 0.0 0.49 0. 0.66 0 0.69 0.370 151 0.0 0.640 0.58 0.0 0.61 0.5 181 180 0.36 0.7 0.51 0.60 0.56 0.570 1 0 0. 0.960 0.49 0.70 0. 0.780 71 70 1.3 0.9 1.1 0.4 0.950 0.45 0.870 3 1.500 0.8 1.60 1.0 0.4 391 1.770 0.36 0.38 1.340 471 1.960 0.34 1.0 1.500 1 0 561 1.900 0.3 1.900 681.480.50 81 3.400.550 00 0 0.17 1 100 0 0.17 15 0 5.50 0.16 18 1800 6.050 0.15 0 000 7.80 0. 5 500 9. 0.11 30 3000 10 0. 00 4.000 0.08 3 000.000 1 00 Measuring Freq. : 0KHz, V / Test Instrument: HP484 Value Tolerance : <1.0 uh = 30% ; 1.0~8.uH = 0% ; uh~00uh = % / 0% D.. urrent : ase on drop % max. & Temp. rise up 40 deg. max. 8.63 7.0 6.50.60 1.94 1.7 1.58 1.4 1.3 1.16 1. 0.93 0.85 0.79 0.7 0.63 0.55 0.50 0.47 0.41 0.37 0.33 0.33 0.8 0.4 0.15 0.008 0.011 0.01 0.016 0.017 0.019 0.04 0.035 0.045 0.060 0.070 0.090 0.0 0.1 0.0 0.170 0.190 0.0 0 0 0 0. 0.630 0.0 0.970 1. 1.300 1.480 1.700 1.900.50.550 0 0 40 8.60 6.80 6.35 5.45 4.30 3.5 3.51 3.40 3..60.30. 1.95 1.85 1.65 1.50 1.30 1.0 0.95 0.90 0. 0.65 0.6 0.60 0.50 0.48 0.46 0.1 Technology o., td. TE:886--871808 FX:886--871908 Page : 4
-V7R Page : 5 NO ITEM TEST ONDITIONS Sample Qty/pcs Spec Result 1 Dimension 本體相關呎吋 Thermal Shock (Temperature ycle) 溫度循環試驗 ctual Size... Temperature:-0 o / +85 o kept stabilized for 30 minutes each ycle: 0 ycles(power off) Meet Spec 3 4 5 6 Humidity Resistance 耐濕試驗 HighTemperature 耐熱試驗 ow Temperature 耐寒試驗 Temperature and Humidity ycle 溫 / 濕度循環試驗 Humidity: 90%~ 95% RH Temperature: 40± o Test Time: 10± Hours Temperature: 85± o Humidity: 0% Testing Time: 10± Hours Temperature: -0 ± o Time: 10± Hours Step Temp Humidity 1 3 5± o 55± o 5± o 95~0%RH 95~96%RH 95~0%RH Time 3.0Hr 9.5Hr 9.5Hr 7 8 9 11 Vibration 振動性試驗 Dipping Verification 吃錫性試驗 IR Reflow Soldering 焊錫性試驗 Soldering Heat Resistance 耐熱焊性試驗 ending Strength 折斷力試驗 Frequency: Hz~55Hz mplitude: 1.5mm Direction: X,Y,Z Time: Hours each Temp ontrol Solder @ Temp 30± 5 o / 3 Sec 吃錫面積必須 > % Go through real SMT IR-Reflow... Solder Temp.: 0~50 o, Time: 50 Sec. 50 o, Time: Sec. ycles: x 3 Preheat:10 ~ o (6 sec) Solder:H63(eutectic solder) Solder Temp.: 60 ± 5 o Flux: Rosin Dip time: ± 1 seconds R 0. 5 1 0 P h i p 1 Flexure Strength 彎曲試驗 0 1. 6 4 5 4 5 13 Terminal Strength 推 / 拉力試驗 X fter solder between copper plate and terminals of coil, push in two directions of X,Y with.0kg must no crack Y High-Voltage 高壓電擊試驗 0 V D between core & winding 15 ORT:on going reliability test 負載電氣試驗 Elec loading & spec test... base on Spec for approval Technology o., td. TE:886--871808 FX:886--871908 Page : 5
-V7R Page : 6 TPE DIMENSION: mm End the Tape : Min. 30 cm lank Tape Direction 4.0+/-0.1.0+/-0.05 1.+/-0.1 T+/-0.05 Start the Tape : Min. 30cm lank Tape PEE STRENGTH OF OVER TPE W+/-0. STRENGTH : ~0 g F+/-0.05 0+/-0.1 VEOITY : 300mm/min. RRIER P+/-0.1 0+/-0.1 K0+/-0.1 NGE o : 165~180 FROM THE TPE DHESIVE FE SIZE/mm 3 5 4 5 7 W 4.00 4.00 4.00 P O 3. 4.40 7.0 7.0 9.40 O 3.94 5.05 6. 6. 6. 8..40.40.40 K O 1.60 1.80 3.60.80 8.90 T F 7.70 7.70 11.0 11.0 11.0 Reel Dimensions: mm [ Reel olor 7"=White, =Dark lue ] +/-0. [Max] Q OK MFD :XXXXX-XXXXX PN :XXXXXXXXX QTY :XXXXX Note :XXXXXXXX +/-0.8 ucstomer abel: PN: arode: PO: Descriptin:...etc. Request abeled on Reel D+/-0. SIZE / mm 3 5 4 5 7 16.5 16.5.4.4 6.4 6.4.1 D 1.4 1.4 1.4 18 18 4.5 REE SIZE 13 13 QTY/REE 3,000 3,000,500,000,000,000 1,500 1,500 1,000 1,000 0 500 OX Package: Unit: cm /3-4 Reel in 5 Inner Small ox in 4/5-1 Reel in 5 Inner Small ox in /5X/7X- Reel in 1 0 8 Inner Small ox 3 4 Outter arge ox 34 4.5 34 Inner Small ox 5 36 36 Outter arge ox Technology o., td. TE:886--871808 FX:886--871908 Page : 6