Prcision Linar arings LINP Product faturs LINP TEFPLAS 200TEFPLAS LINP LINP Linr matrials TEFPLAS LINPHRC35 TEFPLAS G TEFPLAS E FDA Matrial Dry friction Max. static load MPa Max. dynamic load MPa LINP prcision linar barings hav th sam dimnsional accuracy as mtal ball linar barings, but with highr load carrying capacity and xtrmly low oprating nois. Th linrs ar mad of TEFPLAS compounds dvlopd for maintnanc-fr and low friction cofficint, LINP linar barings suitabl for 200 opration tmpratur; LINP small gap opration with TEFPLAS matrials will not damag to th shaft and can clan th surfac dirt. Slf-lubricating, maintnanc-fr High prcision and smooth opration Vibration rduction, no nois High-spd opration and long lif Suitabl for linar, rotary and swing motion TEFPLAS is a standard linr matrial for LINP prcision linar barings. It combins high load baring and war rsistanc prformanc, suitabl for hard shaft HRC35 or highr. TEFPLAS G has xcllnt war rsistanc, suitabl for hard shaft, stainlss stl shaft or aluminum shaft. TEFPLAS E FDA food contact safty matrials, suitabl for stainlss stl shaft or aluminum shaft. PV Max. PV N/mm 2 x m/s m/s Max. Spd,Dry running Continuous Intrmittnt * Opration tmpratur TEFPLAS 0.10-0.25 20 10 0.7 1.5 4.0 200 TEFPLAS G 0.10-0.20 16 8 0.6 1.0 3.0 200 TEFPLAS E 0.05-0.18 12 6 0.4 1.0 2.0 200 *CS xpansion of th shaft and baring. Plas contact CS sals nginrs 227
Prcision Linar arings LINP Chmical rsistanc TEFPLAS TEFPLAS TEFPLAS G TEFPLAS 316 LINP TEFPLAS matrials stand up to harsh nvironmnts and provid xcllnt prformanc in a submrgd condition. TEFPLAS can b attackd by dionizd watr and othr harsh chmicals. TEFPLAS G and TEFPLAS E : almost univrsal chmical inrtnss. Th standard shll matrial is anodizd aluminum of prcision linar barings: good chmical rsistanc in most industrial applications, 316 stainlss stl shll ar availabl for corrosion rsistanc in harsh nvironmnts Factors a cting war rat and lif h6-h7tefplas Ra0.2-0.4TEFPLAS HRC50 TEFPLAS Affcting th lif of prcision linar barings: surfac roughnss, hardnss and dimnsional accuracy of th shaft Rcommnd shafts for th bst prformanc: Shaft diamtr tolranc h6-h7, suitabl for all TEFPLAS matrials Surfac roughnss Ra0.2-0.4, suitabl for all TEFPLAS matrials Surfac hardnss HRC50, according to diffrnt TEFPLAS matrials and th soft shafts ar availabl Eccntric forcs 2:1 1x = 2x = Maximum 2:1 ratio 1x = baring sparation on sam shaft 2x = distanc from shaft to load or forc 2:1 CAUTION: unvn motion or vn systm blockag will occur if th 2:1 ratio is xcdd! 1X 2X MAX Load Forc 2:1 0.25 2:1 This principl is NOT load dpndnt! It is NOT du to dg loading. It is also NOT dpndnt on th driving forc usd! Th gratr th distanc btwn th driv and guid barings, th highr th dgr of war and rquird driv forc. NOTE: Th Rul(2:1) is basd on th static friction valu of 0.25 thortically, Howvr, Additional lubrication can hlp to drop friction and xtnd th 2:1 ratio. If you hav any qustions on dsign and/or assmbly, plas contact our application nginrs. 228
LINP-11R Prcision linar barings, closd Standard spci cations S 1 O do dn Tolranc TEFPLAS TEFPLAS G FDATEFPLAS E 200 d 2 h6 h10 1 H10 LINP-11R-08-C d n h10 Closd and long dsign High prcision similar to prloadd ball baring Standard linr matrial TEFPLAS Availabl matrials: TEFPLAS G and E Anodizd aluminum adaptr Axial scurd by circlips Maintnanc-fr and low nois Opration tmpratur 200 s H10 Compnsatd Claranc Innr diamtr Closd housing Long dsign Linr matrial:/g/e Housing: H7 LINP-11R-08 8 +0.013/+0.035 16 25 16.2 15.2 1.1 1.86 13.20 5 LINP-11R-10 10 +0.013/+0.035 19 29 21.6 17.5 1.3 1.86 15.40 5 LINP-11R-12 12 +0.016/+0.043 22 32 22.6 20.5 1.3 1.86 18.40 6 LINP-11R-16 16 +0.016/+0.043 26 36 24.6 24.2 1.3 2.86 20.40 8 LINP-11R-20 20 +0.020/+0.053 32 45 31.2 29.6 1.6 2.86 26.40 10 LINP-11R-25 25 +0.020/+0.053 40 58 43.7 36.5 1.85 2.86 34.40 12.5 LINP-11R-30 30 +0.020/+0.053 47 68 51.7 43.5 1.85 2.86 41.40 15 LINP-11R-40 40 +0.020/+0.064 62 80 60.3 57.8 2.15 2.86 56.40 20 LINP-11R-50 50 +0.020/+0.064 75 100 77.3 70.5 2.65 2.86 69.40 25 O H10 do H10 LINP-11R Shaft Housing H7 Dynamic Load Static Load Wight G E G E LINP-11R-08 8 16 2000 1600 1200 4000 3200 2400 8 LINP-11R-10 10 19 2900 2320 1740 5800 4640 3480 15 LINP-11R-12 12 22 3840 3072 2304 7680 6144 4608 18 LINP-11R-16 16 26 5760 4608 3456 11520 9216 6912 39 LINP-11R-20 20 32 9000 7200 5400 18000 14400 10800 52 LINP-11R-25 25 40 14500 11600 8700 29000 23200 17400 119 LINP-11R-30 30 47 20400 16320 12240 40800 32640 24480 149 LINP-11R-40 40 62 32000 25600 19200 64000 51200 38400 333 LINP-11R-50 50 75 50000 40000 30000 100000 80000 60000 823 229
Prcision Linar arings LINP-12R Linar barings, closd, short dsign LINP-12R TEFPLAS TEFPLAS G FDATEFPLAS E 200 Closd and short dsign High prcision similar to prloadd ball baring Standard linr matrial TEFPLAS Availabl matrials: TEFPLAS G and E Anodizd aluminum adaptr Maintnanc-fr and low nois Opration tmpratur 200 Standard spci cations O LINP-12R-08-C Compnsatd Claranc Innr diamtr do Closd housing Tolranc d 2 h7 h10 O H10 Short dsign Linr matrial:/g/e Housing: H7 do H10 LINP-12R-08 8 +0.013/+0.035 15 24 2 12.2 10 LINP-12R-10 10 +0.013/+0.035 17 26 2 14.4 12 LINP-12R-12 12 +0.016/+0.043 19 28 2 16.6 14 LINP-12R-16 16 +0.016/+0.043 24 30 2 21.3 14 LINP-12R-20 20 +0.020/+0.053 28 30 2 25.5 14 LINP-12R-25 25 +0.020/+0.053 35 40 3.2 30.9 22 LINP-12R-30 30 +0.020/+0.053 40 50 3.2 35.9 30 LINP-12R-40 40 +0.020/+0.064 52 60 4.1 46.2 40 LINP-12R-50 50 +0.020/+0.064 62 70 4.1 56.3 50 Shaft Housing H7 Dynamic Load Static Load Wight G E G E LINP-12R-08 8 15 1920 1536 1152 3840 3072 2304 7 LINP-12R-10 10 17 2600 2080 1560 5200 4160 3120 9 LINP-12R-12 12 19 3360 2688 2016 6720 5376 4032 11 LINP-12R-16 16 24 4800 3840 2880 9600 7680 5760 18 LINP-12R-20 20 28 6000 4800 3600 12000 9600 7200 23 LINP-12R-25 25 35 10000 8000 6000 20000 16000 12000 44 LINP-12R-30 30 40 15000 12000 9000 30000 24000 18000 65 LINP-12R-40 40 52 24000 19200 14400 48000 38400 28800 123 LINP-12R-50 50 62 35000 28000 21000 70000 56000 42000 177 230
LINP-11RK Linar barings, opn TEFPLAS TEFPLAS G FDATEFPLAS E 200 Opn dsign for supportd shafts High prcision similar to prloadd ball baring Standard linr matrial TEFPLAS Availabl matrials: TEFPLAS G and E Anodizd aluminum adaptr Maintnanc-fr and low nois Opration tmpratur 200 LINP-11RK Standard spci cations S O h LINP-11RK-08-C do dn W 90 Compnsatd Claranc 0 1 90 180 f a Innr diamtr Opn, aluminum adaptr Long dsign Linr matrial:/g/e Housing: H7 Tolranc d 2 h6 h10 1 H10 d n h10 LINP-11RK-08 8 +0.013/+0.035 16 25 16.0 15.2 1.10 1.86 13.20 5 5.50 / / / LINP-11RK-10 10 +0.013/+0.035 19 29 21.6 17.5 1.30 1.86 15.40 5 7.30 / / / LINP-11RK-12 12 +0.016/+0.043 22 32 22.6 20.5 1.30 1.86 18.40 6 9.00 3.0 1.2 1.33(7 ) LINP-11RK-16 16 +0.016/+0.043 26 36 24.6 24.2 1.30 2.86 20.40 8 11.60 2.2 1.2 / LINP-11RK-20 20 +0.020/+0.053 32 45 31.2 29.6 1.60 2.86 26.40 10 12.00 2.2 1.2 / LINP-11RK-25 25 +0.020/+0.053 40 58 43.7 36.5 1.85 2.86 34.40 12.5 14.50 3.0 1.5-1.50(-4.3 ) LINP-11RK-30 30 +0.020/+0.053 47 68 51.7 43.5 1.85 2.86 41.40 15 16.60 3.0 2.0 2.00(4.9 ) LINP-11RK-40 40 +0.020/+0.064 62 80 60.3 57.8 2.15 2.86 56.40 20 21.00 3.0 2.0 1.50(2.8 ) LINP-11RK-50 50 +0.020/+0.064 75 100 77.3 70.5 2.65 2.86 69.40 25 25.50 3.0 2.0 2.50(3.8 ) s H10 O H10 do H10 W-1 a+0.1 h f 0.2 Shaft Housing H7 Matrial: Dynamic Load Matrial: Static Load 0 90 180 0 90 180 Wight LINP-11RK-08 8 16 2000 1725 625 4000 3450 1250 8 LINP-11RK-10 10 19 2900 2442 783 5800 4884 1566 11 LINP-11RK-12 12 22 3840 3190 960 7680 6381 1920 15 LINP-11RK-16 16 26 5760 4864 1584 11520 9727 3168 21 LINP-11RK-20 20 32 9000 8100 3600 18000 16200 7200 42 LINP-11RK-25 25 40 14500 13154 6090 29000 26309 12180 70 LINP-11RK-30 30 47 20400 18700 9112 40800 37400 18224 132 LINP-11RK-40 40 62 32000 29600 15200 64000 59200 30400 278 LINP-11RK-50 50 75 50000 46650 25000 100000 93300 50000 479 231
Prcision Linar arings LINP-11RS Floating linar barings, closd LINP-11RS TEFPLAS TEFPLAS G FDATEFPLAS E 200 Closd and slf-aligning dsign High prcision similar to prloadd ball baring Standard linr matrial TEFPLAS Availabl matrials: TEFPLAS G and E Anodizd aluminum adaptr Axial scurd by circlips Maintnanc-fr and low nois Opration tmpratur 200 Standard spci cations ds S R 1 O do Tolranc dn d 2 h6 h10 1 H10 s H10 LINP-11RS-10-C d n h10 d s h10 d o h10 Compnsatd Claranc Innr diamtr Automatic alignmnt aluminum adaptr Long dsign Linr matrial:/g/e Housing: H7 LINP-11RS-08 8 +0.013/+0.035 15.8 25 16.4 1.1 15.0 15.5 13.20 1.86 5.0 20 LINP-11RS-10 10 +0.013/+0.035 18.8 29 21.8 1.3 17.5 18.5 15.40 1.86 5.0 13 LINP-11RS-12 12 +0.016/+0.043 21.8 32 22.8 1.3 20.5 21.5 18.40 1.86 6.0 18 LINP-11RS-16 16 +0.016/+0.043 25.8 36 24.9 1.3 24.2 25.5 20.40 2.86 8.0 32 LINP-11RS-20 20 +0.020/+0.053 31.8 45 31.5 1.6 29.6 31.5 26.40 2.86 10.0 50 LINP-11RS-25 25 +0.020/+0.053 39.8 58 44.1 1.85 36.5 39.0 34.40 2.86 12.5 39 LINP-11RS-30 30 +0.020/+0.053 46.7 68 52.1 1.85 43.5 46.0 41.40 2.86 15.0 57 LINP-11RS-40 40 +0.020/+0.064 61.7 80 60.9 2.15 57.8 61.0 56.40 2.86 20.0 100 LINP-11RS-50 50 +0.020/+0.064 74.7 100 78.0 2.65 70.5 74.0 69.40 2.86 25.0 157 o+0.1 R Shaft Housing H7 Dynamic Load Static Load Wight G E G E LINP-11RS-08 8 16 2000 1600 1200 4000 3200 2400 8 LINP-11RS-10 10 19 2900 2320 1740 5800 4640 3480 15 LINP-11RS-12 12 22 3840 3072 2304 7680 6144 4608 18 LINP-11RS-16 16 26 5760 4608 3456 11520 9216 6912 39 LINP-11RS-20 20 32 9000 7200 5400 18000 14400 10800 52 LINP-11RS-25 25 40 14500 11600 8700 29000 23200 17400 119 LINP-11RS-30 30 47 20400 16320 12240 40800 32640 24480 149 LINP-11RS-40 40 62 32000 25600 19200 64000 51200 38400 333 LINP-11RS-50 50 75 50000 40000 30000 100000 80000 60000 823 232
LINP-11RSK Floating linar barings, opn TEFPLAS TEFPLAS G FDATEFPLAS E 200 Opn and slf-aligning dsign High prcision similar to prloadd ball baring Standard linr matrial TEFPLAS Availabl matrials: TEFPLAS G and E Anodizd aluminum adaptr Maintnanc-fr and low nois Opration tmpratur 200 LINP-11RSK Standard spci cations S O R LINP-11RSK-10-C ds do dn h W 90 Compnsatd Claranc Innr diamtr 0 1 90 180 f a Opn, automatic alignmnt aluminum adaptr Long dsign Linr matrial:/g/e Housing: H7 Tolranc d 2 h7 h10 1 H10 s H10 d n h10 LINP-11RSK-08 8 +0.013/+0.035 15.8 25 16.4 1.1 15.0 15.5 13.20 1.86 5.50 20 5.50 / / / LINP-11RSK-10 10 +0.013/+0.035 18.8 29 21.8 1.3 17.5 18.5 15.40 1.86 7.30 13 7.30 / / / LINP-11RSK-12 12 +0.016/+0.043 21.8 32 22.8 1.3 20.5 21.5 18.40 1.86 9.00 18 9.00 3.0 1.2 1.33(7 ) LINP-11RSK-16 16 +0.016/+0.043 25.8 36 24.9 1.3 24.2 25.5 20.40 2.86 11.60 32 11.60 2.2 1.2 / LINP-11RSK-20 20 +0.020/+0.053 31.8 45 31.5 1.6 29.6 31.5 26.40 2.86 12.00 50 12.00 2.2 1.2 / LINP-11RSK-25 25 +0.020/+0.053 39.8 58 44.1 1.85 36.5 39.0 34.40 2.86 14.50 39 14.50 3.0 1.5-1.50(-4.3 ) LINP-11RSK-30 30 +0.020/+0.053 46.7 68 52.1 1.85 43.5 46.0 41.40 2.86 16.60 57 16.60 3.0 2.0 2.00(4.9 ) LINP-11RSK-40 40 +0.020/+0.064 61.7 80 60.9 2.15 57.8 61.0 56.40 2.86 21.00 100 21.00 3.0 2.0 1.50(2.8 ) LINP-11RSK-50 50 +0.020/+0.064 74.7 100 78.0 2.65 70.5 74.0 69.40 2.86 25.50 157 25.50 3.0 2.0 2.50(3.8 ) d s h10 d o h10 o+0.1 R W-1 a+0.1 h f 0.2 Shaft Housing H7 Matrial: Dynamic Load Matrial: Static Load 0 90 180 0 90 180 Wight LINP-11RSK-08 8 16 2000 1725 625 4000 3450 1250 8 LINP-11RSK-10 10 19 2900 2442 783 5800 4884 1566 11 LINP-11RSK-12 12 22 3840 3190 960 7680 6381 1920 15 LINP-11RSK-16 16 26 5760 4864 1584 11520 9727 3168 21 LINP-11RSK-20 20 32 9000 8100 3600 18000 16200 7200 42 LINP-11RSK-25 25 40 14500 13154 6090 29000 26309 12180 70 LINP-11RSK-30 30 47 20400 18700 9112 40800 37400 18224 132 LINP-11RSK-40 40 62 32000 29600 15200 64000 59200 30400 278 LINP-11RSK-50 50 75 50000 46650 25000 100000 93300 50000 479 233
Plastic Linar arings LINP-11RF Round ang linar barings LINP-11RF TEFPLAS TEFPLAS G FDATEFPLAS E 200 High prcision similar to prloadd ball baring Standard linr matrial TEFPLAS Availabl matrials: TEFPLAS G and E Anodizd aluminum adaptr Scurd by bolts Maintnanc-fr and low nois Opration tmpratur 200 Standard spci cations LINP-11RF-10-C Compnsatd Claranc Innr diamtr f ds d3 db ts Tolranc d 2 h7 dt d t 0.15 d 3 f Long dsign Linr matrial:/g/e Housing: H7 t s d b d s LINP-11RF-08 8 +0.013/+0.035 16 24 32 25 8 3.1 3.5 6.0 LINP-11RF-10 10 +0.013/+0.035 19 29 39 29 9 4.1 4.5 7.5 LINP-11RF-12 12 +0.016/+0.043 22 32 42 32 9 4.1 4.5 7.5 LINP-11RF-16 16 +0.016/+0.043 26 36 46 36 9 4.1 4.5 7.5 LINP-11RF-20 20 +0.020/+0.053 32 43 54 45 11 5.1 5.5 9.0 LINP-11RF-25 25 +0.020/+0.053 40 51 62 58 11 5.1 5.5 9.0 LINP-11RF-30 30 +0.020/+0.053 47 62 76 68 14 6.1 6.6 11.0 LINP-11RF-40 40 +0.020/+0.064 62 80 98 80 18 8.1 9.0 14.0 LINP-11RF-50 50 +0.020/+0.064 75 94 112 100 18 8.1 9.0 14.0 Shaft Housing H7 Dynamic Load Static Load Wight G E G E LINP-11RF-08 8 16 2000 1600 1200 4000 3200 2400 20 LINP-11RF-10 10 19 2900 2320 1740 5800 4640 3480 34 LINP-11RF-12 12 22 3840 3072 2304 7680 6144 4608 43 LINP-11RF-16 16 26 5760 4608 3456 11520 9216 6912 54 LINP-11RF-20 20 32 9000 7200 5400 18000 14400 10800 91 LINP-11RF-25 25 40 14500 11600 8700 29000 23200 17400 154 LINP-11RF-30 30 47 20400 16320 12240 40800 32640 24480 266 LINP-11RF-40 40 62 32000 25600 19200 64000 51200 38400 555 LINP-11RF-50 50 75 50000 40000 30000 100000 80000 60000 852 234
LINP-11RT Angular ang linar barings TEFPLAS TEFPLAS G FDATEFPLAS E 200 High prcision similar to prloadd ball baring Standard linr matrial TEFPLAS Availabl matrials: TEFPLAS G and E Anodizd aluminum adaptr Scurd by bolts Maintnanc-fr and low nois Opration tmpratur 200 LINP-11RT Standard spci cations LINP-11RT-10-C Compnsatd Claranc dt Innr diamtr f d3 ds db ts K Tolranc d 2 h7 d t 0.15 d 3 f Long dsign Linr matrial:/g/e t s Housing: H7 d b d s K 0.15 LINP-11RT-08 8 +0.013/+0.035 16 24 32 25 8 3.1 3.5 6.0 25 LINP-11RT-10 10 +0.013/+0.035 19 29 39 29 9 4.1 4.5 7.5 30 LINP-11RT-12 12 +0.016/+0.043 22 32 42 32 9 4.1 4.5 7.5 32 LINP-11RT-16 16 +0.016/+0.043 26 36 46 36 9 4.1 4.5 7.5 35 LINP-11RT-20 20 +0.020/+0.053 32 43 54 45 11 5.1 5.5 9.0 42 LINP-11RT-25 25 +0.020/+0.053 40 51 62 58 11 5.1 5.5 9.0 50 LINP-11RT-30 30 +0.020/+0.053 47 62 76 68 14 6.1 6.6 11.0 60 LINP-11RT-40 40 +0.020/+0.064 62 80 98 80 18 8.1 9.0 14.0 75 LINP-11RT-50 50 +0.020/+0.064 75 94 112 100 18 8.1 9.0 14.0 88 Shaft Housing H7 Dynamic Load Static Load Wight G E G E LINP-11RT-08 8 16 2000 1600 1200 4000 3200 2400 20 LINP-11RT-10 10 19 2900 2320 1740 5800 4640 3480 34 LINP-11RT-12 12 22 3840 3072 2304 7680 6144 4608 43 LINP-11RT-16 16 26 5760 4608 3456 11520 9216 6912 54 LINP-11RT-20 20 32 9000 7200 5400 18000 14400 10800 91 LINP-11RT-25 25 40 14500 11600 8700 29000 23200 17400 154 LINP-11RT-30 30 47 20400 16320 12240 40800 32640 24480 266 LINP-11RT-40 40 62 32000 25600 19200 64000 51200 38400 555 LINP-11RT-50 50 75 50000 40000 30000 100000 80000 60000 852 235
Plastic Linar arings LINP-11G Pillow blocks, standard dsign LINP-11G TEFPLAS TEFPLAS G FDATEFPLAS E 200 Closd dsign with housing High prcision similar to prloadd ball baring Standard linr matrial TEFPLAS Availabl matrials: TEFPLAS G and E Anodizd aluminum housing Scurd by bolts Maintnanc-fr and low nois Opration tmpratur 200 Standard spci cations W 4-S1 E J±0.02 L K±0.02 LINP-11G-16-C Compnsatd Claranc H G A h±0.02 Innr diamtr Pillow block, standard dsign D±0.02 aring 4-S2 Shaft Siz Long dsign Linr matrial:/g/e h D W H G A J E S 1 S 2 K L LINP-11G-12 LINP-11R-12 12 15 22 44 30 24 8 33 5.5 M5*12 4.3 26 39 LINP-11G-16 LINP-11R-16 16 19 25 50 38.5 32.5 9 36 7 M5*12 4.3 34 44 LINP-11G-20 LINP-11R-20 20 21 27 54 41 35 11 40 7 M6*12 5.2 40 53 LINP-11G-25 LINP-11R-25 25 26 38 76 51.5 41 12 54 11 M8*12 7 50 67 LINP-11G-30 LINP-11R-30 30 30 39 78 59.5 49 15 58 10 M8*12 7 58 76 LINP-11G-40 LINP-11R-40 40 40 51 102 78 62 20 80 11 M10*25 8.7 60 90 LINP-11G-50 LINP-11R-50 50 52 61 122 102 80 24 100 11 M10*25 8.7 80 110 I.D Tolranc Dynamic Load Static Load Wight G E G E LINP-11G-12 12 +0.016/+0.043 3840 3072 2304 7680 6144 4608 79 LINP-11G-16 16 +0.016/+0.043 5760 4608 3456 11520 9216 6912 125 LINP-11G-20 20 +0.020/+0.053 9000 7200 5400 18000 14400 10800 159 LINP-11G-25 25 +0.020/+0.053 14500 11600 8700 29000 23200 17400 343 LINP-11G-30 30 +0.020/+0.053 20400 16320 12240 40800 32640 24480 450 LINP-11G-40 40 +0.020/+0.064 32000 25600 19200 64000 51200 38400 1021 LINP-11G-50 50 +0.020/+0.064 50000 40000 30000 100000 80000 60000 1871 236
LINP-11GN Pillow blocks, short dsign TEFPLAS TEFPLAS G FDATEFPLAS E 200 Closd dsign with short housing High prcision similar to prloadd ball baring Standard linr matrial TEFPLAS Availabl matrials: TEFPLAS G and E Anodizd aluminum housing Scurd by bolts Maintnanc-fr and low nois Opration tmpratur 200 LINP-11GN Standard spci cations H 4-S1 x1 G A E D±0.02 W J±0.02 aring 4-S2 Shaft h±0.02 Ls LINP-11GN-16-C Siz Compnsatd Claranc Innr diamtr Pillow block, short dsign Long dsign Linr matrial:/g/e h D W H G A J E S 1 S 2 L LINP-11GN-12 LINP-11R-12 12 15 22 44 30 24 8 33 5.5 M5*12 4.3 20.3 LINP-11GN-16 LINP-11R-16 16 19 25 50 38.5 32.5 9 36 7 M5*12 4.3 22.3 LINP-11GN-20 LINP-11R-20 20 21 27 54 41 35 11 40 7 M6*12 5.2 28.3 LINP-11GN-25 LINP-11R-25 25 26 38 76 51.5 41 12 54 11 M8*12 7 40.4 LINP-11GN-30 LINP-11R-30 30 30 39 78 59.5 49 15 58 10 M8*12 7 48.4 LINP-11GN-40 LINP-11R-40 40 40 51 102 78 62 20 80 11 M10*25 8.7 56.4 LINP-11GN-50 LINP-11R-50 50 52 61 122 102 80 24 100 11 M10*25 8.7 72.3 I.D Tolranc Dynamic Load Static Load Wight G E G E LINP-11GN-12 12 +0.016/+0.043 3840 3072 2304 7680 6144 4608 43 LINP-11GN-16 16 +0.016/+0.043 5760 4608 3456 11520 9216 6912 67 LINP-11GN-20 20 +0.020/+0.053 9000 7200 5400 18000 14400 10800 90 LINP-11GN-25 25 +0.020/+0.053 14500 11600 8700 29000 23200 17400 193 LINP-11GN-30 30 +0.020/+0.053 20400 16320 12240 40800 32640 24480 260 LINP-11GN-40 40 +0.020/+0.064 32000 25600 19200 64000 51200 38400 641 LINP-11GN-50 50 +0.020/+0.064 50000 40000 30000 100000 80000 60000 852 237
Plastic Linar arings LINP-11GK Opn pillow blocks LINP-11GK TEFPLAS TEFPLAS G FDATEFPLAS E 200 Opn housing dsign High prcision similar to prloadd ball baring Standard linr matrial TEFPLAS Availabl matrials: TEFPLAS G and E Anodizd aluminum housing Scurd by bolts Maintnanc-fr and low nois Opration tmpratur 200 Standard spci cations W M J±0.02 K±0.2 D1±0.01 4-S1 LINP-11GK-16-C G h2±0.02 A Compnsatd Claranc 0 d U 90 180 S2 H Innr diamtr Pillow block, opn dsign Long dsign Linr matrial:/g/e aring Shaft Siz W G A M h 2 D U J K S 1 S 2 LINP-11GK-12 LINP-11RK-12 12 40 27.6 8 39 17 14 80 28 26 M5*10 4.5 LINP-11GK-16 LINP-11RK-16 16 45 33 9 45 20 22.5 80 32 30 M5*10 5.5 LINP-11GK-20 LINP-11RK-20 20 48 39 11 50 23 24 60 35 35 M6*12 5.5 LINP-11GK-25 LINP-11RK-25 25 60 47 14 65 27 30 50 40 40 M6*12 6.6 LINP-11GK-30 LINP-11RK-30 30 70 56 15 70 33 35 50 50 50 M8*18 6.6 LINP-11GK-40 LINP-11RK-40 40 90 72 20 90 42 45 50 65 65 M10*25 9 LINP-11GK-50 LINP-11RK-50 50 120 92 25 110 53 60 50 94 80 M10*25 11 I.D Tolranc Matrial: Dynamic Load Matrial: Static Load 0 90 180 0 90 180 Wight LINP-11GK-12 12 +0.016/+0.043 3840 3190 960 7680 6381 1920 79 LINP-11GK-16 16 +0.016/+0.043 5760 4864 1584 11520 9727 3168 125 LINP-11GK-20 20 +0.020/+0.053 9000 8100 3600 18000 16200 7200 159 LINP-11GK-25 25 +0.020/+0.053 14500 13154 6090 29000 26309 12180 343 LINP-11GK-30 30 +0.020/+0.053 20400 18700 9112 40800 37400 18224 450 LINP-11GK-40 40 +0.020/+0.064 32000 29600 15200 64000 59200 30400 1021 LINP-11GK-50 50 +0.020/+0.064 50000 46650 25000 100000 93300 50000 1871 238