(100V 120V 220V 230V) i ii
! (Return Lead) iii iv
1....... 1 1-1.... 1 1-2.... 2 2..... 4 3..... 3-1.... 3-2.... 3-3....... 4..... 9 5......... 5-1.LCD..... 5-2.... 5-3.... 5-4.... 6..... 6-1.... 6-2.... 8 8 8 8 13 13 15 25 27 37 37 37 EC Declaration of Conformity We GOOD WILL INSTRUMENT CO., LTD. No. 95-11, Pao-Chung Rd., Hsin-Tien City, Taipei Hsien, Taiwan GOOD WILL INSTRUMENT (SUZHOU) CO., LTD. No. 69 Lushan Road, Suzhou New District Jiangsu, China. declares that the below mentioned product GPT-705A/715A, GPI-725A/735A/745A are herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Law of Member States relating to Electromagnetic Compatibility (89/336/EEC,92/31/EEC) and Low Voltage Equipment Directive (73/23/EEC, 93/68/EEC). For the evaluation regarding the Electromagnetic Compatibility and Low Voltage Equipment Directive, the following standards were applied: EN 61326-1: Electrical equipment for measurement, control and laboratory use EMC requirements (1997+A1: 1998+A2:2001) Conducted and Radiated Emissions Electrostatic Discharge EN 55011 Group I class A: 1998 EN 61000-4-2: 1995+A1 :1998 Current Harmonic Radiated Immunity EN 61000-3-2: 2000 EN 61000-4-3: 1996+A1 :1998 Voltage Fluctuation Electrical Fast Transients EN 61000-3-3: 1995 EN 61000-4-4: 1995 Surge Immunity EN 61000-4-5: 1995 Conducted Susceptibility EN 61000-4-6: 1996 Voltage Dips/ Interrupts EN 61000-4-11: 1994 Low Voltage Equipment Directive 73/23/EEC & amended by 93/68/EEC Safety Requirements IEC/EN 61010-1: 2001 Remark: Also complied with Continuity of Protective Bonding Tester, Insulation Resistance Test, Voltage Test, and Residual Voltage Test in accordance with the Sub-Clauses 19.2, 19.3, 19.4 and 19.5 of EN 60204-1: 1997 v vi
1. 1-1. GPT/GPI-700A AD/DC 1-2. SHB-001-1 SHB-001-2 JIS, CSA, UL, BS GPT/GPI-700A Function Model AC DC IR GB GPI-745A GPI-735A GPI-725A GPT-715A GPT-705A 1-2. 1) 2) LED 24 2 LCD 3) 4) 5) 6) 50 60 Hz 7) ARC 8) 10 16 10 16 1 2
9) COM 10) LED 11) (PLC) 9 pin PLC 12) 13) AC DC 14) R/P 15) 96 16) RS-232 GPIB RS-232 GPIB 2. (15 ~35 75%) 1) Hi-Pot ( ) 0.100~5.000kV 5V/ 1% + 5 1% + 10V 30~40mA(500V, : 180 ) 0.10~29.99mA(500V, ) 0.10~10mA(500V,) 0.10~40mA, 0.02mA/ 1% + 50 A 2) Hi-Pot GPT-715A/GPI-735A/745A) 0.100~6.000kV 5V/ ( ) 1% + 5V 1% + 10V 0.10~10.00mA(500V, ) 0.10~2mA(500V,) 0.10~10mA, 0.01mA/ 1% + 50 A 3) ( GPI-725A/ 735A/ 745A) 50V/100V/500V/1000V 3 4
50V/100V: 1~50M : 5% 51~200M : 10% 201~1990M : 20% 500V/1000V: 1~500M : 5% 501~2000M : 10% 2001~9999M : 20% 4) ( GPI-745A) 8V(DC) 3~42A 0.02A 1%+ 50mA 0~600m 0.1m 1%+2m 5) ( GPT-705A/715A/ GPI-725A/ 735A) 0.1A(DC) 10% 0.1, 1 6) AC / 000.0~999.9 DC / 000.0~999.9 001.0~999.9 000.0~999.9 000.0~999.9 7) ARC 40 (1~40mA) 8) 10 16 5 9) RS-232 GPIB 10) PLC D-sub 9 pins 11) D-sub 9 pins 12) Hi-pot GB 13) 6 GPI-745A 100V, 120V, 220V, 230V 10% 50/60Hz 2000 m II 2 0 ~40 80% -10 ~70 70% 446( ) 330( ) 149( ) (mm) 14.9 : (GHT-105A,GTL-115) 1 1 1 * 2-1 * 30~40mA 10
40 35 30 25 20 15 10 8 6 4 2 0 AC Hi-Pot Spec 180sec AC Hi-Pot Spec Continuous DC Hi-Pot Spec Continuous 100 200 300 400 500 1000 2000 3000 4000 5000 6000 V 2-1 3. 3-1. 3-2. II III IV 100V 120V 90-110V 108-132V T 7.0A 250V 220V 230V 198-242V 207-250V T 4A 250V 250V 3-3. 0 40 C (32 104 F) Class A 7 8
4. 9 10
1 2 FAIL LED LED 3 PASS LED LED 4 CAUTION LED LED 5 LCD 6 START 7 RESET 8 MENU MENU 9 EDIT/SAVE EDIT/SAVE EDIT 10 UTILITY UTILITY 11 FIELD FIELD 12 13 EDIT 14 MENU 15 LCD VR LCD 16 VR 17 18 SOURCE ( ) 19 SOURCE ( ) 20 21 SENSE 22 SENSE RETURN SENSE RETURN 11 23 24 25 AC 26 PLC 27 RS232 D-sub 9 pin RS232 / 28 GPIB 24 pin IEE488 / 29 D-sub 9 pin 30 31 Sense+ 32 Source+ 33 Source SENSE SENSE 34 RETURN RETURN * SHB-001-1 SHB-001-2 12
5. 5-1. LCD 1 0 1 A C W V = 5. 0 0 0 K V R E A D Y I m a x = 0 1. 0 0 m A T E S T 0 0 0. 0 s 流 狀 量 / 10 16 3:1 3 1 ACW: DCW:( GPT-715A/ GPI-735A/745A) I R : ( GPI-725A/GPI-735A /745A) G B : ( GPI-745A) Cnt:( GPT-705A/715A / GPI-725A/735A) A C : (0.100~ 5.000 kv) D C : (0.100~ 6.000 kv) / I R : (50V/100V/500V/1000V) : 00 : 00 G B : (3.00~42.00A) Cnt: (10mA) MENU: EDIT: SAVE: UTIL: READY: TEST: PASS: PASS FAIL: FAIL. STOP: Imax/Imin: (ACW & DCW) Rmax/Rmin: (IR & Cnt) AC:/ (000.0~999.9 ) DC:/ (000.0~999.9 ) IR: (001.0~999.9 ) GB: (000.0~999.9 ) Cnt: (000.0~999.9 ) Hi=01 Lo=02 1 2 * 13 14
5-2. 1. MENU MENU MENU Edit/Save 1. 2. EDIT/SAVE EDIT EDIT MENU EDIT/SAVE 2. 3. 0:00 A C AC W 15 16
4. FIELD 1. 2. RESET READY V=2.000kV READY FIELD RESET 5. 6. EDIT/SAVE SAVE EDIT EDIT/SAVE 7. SAVE 3. 4. START TEST CAUTION LED START TEST 17 18
5. RESET STOP RESET STOP 7. FAIL LED FAIL RESET FAIL RESET 6. PASS LED PASS PASS 8. 1:3 19 20
1. UTILITY UTIL UTILITY 2 UTIL G R O U P T E S T F R O M S T E P 1 From STEP 1 1 01~01 GROUP TEST From the present step 01~03 DISABLE ENABLE & ARC MODE STOP ENABLE & CONTINUE ARC CURRENT AC 50 Hz 50 Hz FREQUENCY 60 Hz 60 Hz : MODE 1 1: TEST MODE 2 2: START CONTROL MODE 3: I/O START MODE 3 MODE 4 4: DATA LOCK UNLOCKED LOCKED Cnt. CALIBRATION Stop on fail Fail IR TEST Stop on pass Pass MODE Timer Pass Fail 21 22
ZERO CHECK ( ) RS-232 Baud 1200, 2400, 4800, 9600. Interface Rate GPIB Address 00~31 Stop FAIL Setting 16 Continue 3. T E S T MO D E F R O M ST E P 1. 2. EDIT/SAVE 4. EDIT/SAVE SAVE EDIT SAVE EDIT EDIT/SAVE EDIT/SAVE 5. 23 24
5-3. EST 10 16 ( 1~ 16) COM : Group 0 Group 1 Group 2 Group 3 Group 4 Group 5 ~ Group 9 Step 1 0:1 1:1 2:1 3:1 4:1 5:1 9:1 Step 2 0:2 1:2 2:2 3:2 4:2 5:2 9:2 Step 3 0:3 1:3 2:3 3:3 4:3 5:3 9:3 Step 4 0:4 1:4 2:4 3:4 4:4 5:4 9:4 Step 5 0:5 1:5 2:5 3:5 4:5 5:5 9:5 Step 16 0:16 1:16 2:16 3:16 4:16 5:16 9:16 COM CAC CDC CAC(CDC) ACW : Step 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 Test P P P P P P P P P P P P P P P P N: Empty P: Pass F: Fail Step 1: CH1 Step 2: CH2 Step 3: CH3 Step 4: CH4 Step 5: CH5 Step 6: CH6 Step 7: CH7 Step 8: CH8 Step 9: CH9 Step 0: CH10 Step 1: CH11 Step 2: CH12 Step 3: CH13 Step 4: CH15 Step 5: CH15 Step 6: CH16 25 26
5-4. / (ACW/DCW GPT-715A /GPI-735A/745A) 1) MENU MENU 2) EDIT/SAVE EDIT ACW (DCW) FIELD : ACW(DCW) V=X.XXXkV 量 Imax=XX.XXmA 量 Imin=XX.XXmA RAMP=XXX.Xs TEST=XXX.Xs 3) FIELD (0.100~ 5.000 kv ACW, 0.100~ 6.000 kv DCW) 4) FIELD (0.10~40mA ACW, 0.10~10mA DCW) 5) FIELD (0.10~40mA ACW, 0.10~10mA DCW) 6) FIELD (0~999.9s) 7) FIELD (0~999.9s) 8) FIELD EDIT/SAVE AC/DC ( CAC/CDC GPT-715A/ GPI-735A/745A) CAC/CDC COM CAC/CDC ACW/DCW Channel Hi=00 Lo=00 27 28
(IR GPI-725A/735A/745A ) 1) MENU MENU 2) EDIT/SAVE EDIT FIELD : IR V=X.XXXkV 3) FIELD (50V/100V/500V/1000V) 4) FIELD (0~9999M, 0~2000M 50V/100V) 5) FIELD (0~9999M, 0~2000M 50V/100V) 6) FIELD (0.5~999.9 ) 7) FIELD EDIT/SAVE 量 Rmax=XXXXM 量 Rmin=XXXXM TEST=XXX.Xs Channel Hi=00 Lo=00 29 30
(GB GPI-745A) 1) MENU MENU 2) EDIT/SAVE EDIT FIELD : GB I=XX.XXA 量 Rmax= XXX.Xm 3) FIELD (3.00~42.00A) 4) FIELD (0~620.0m ) 5) FIELD (0~620.0m ) 6) FIELD (0~999.9 ) 7) FIELD EDIT/SAVE 8) Hi:00 Lo:10 量 Rmin=XXX.Xm TEST=XXX.Xs Channel Hi=00 Lo=00 31 32
(Cnt) 1) MENU MENU 2) EDIT/SAVE EDIT Cnt 0.100A FIELD : 3) FIELD (0~1.200 ) 4) FIELD (0~999.9s) 5) FIELD EDIT/SAVE Cnt 量 Rmax=XXXX TEST=X.XXXs 33 34
(START RESET) (TEST PASS FAIL) REMOTE CONTROLLER RESET (pin 1) START (pin 2) EST REMOTE INTERFACE TESTING 1 TESTING 2 FAIL 2 FAIL 1 COMMON START RESET PASS 1 PASS 2 COMMON (pin 3) TESTING1 (pin 4) TESTING2 (pin 5) PASS1 (pin 6) PASS2 (pin 7) FAIL1 (pin 8) RESET RESET ( 1) COMMON ( 3) READY RESET START READY TEST ( 2) COMMON ( 3) START TESTING 1/ TESTING 2 PASS 1/ PASS 2 FAIL 1/ FAIL 2 TESTING 1 ( 4) TESTING 2 ( 5) PASS 1 ( 6) PASS 2 ( 7) FAIL 1 ( 8) FAIL 2 ( 9) FAIL2 (pin 9) * Reset Start Common 35 36
6. 6-1. () 250V 6-2. 37