TT350n

Transcription

1 迅丽 TTL 机顶闪光灯 Thinklite TTL Camera Flash For Nikon 深圳市神牛摄影器材有限公司 GODOX Photo Equipment Co., Ltd. 地址 /Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园 A4 栋 Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong Town, Baoan District, Shenzhen , China 电话 /Tel: (806) 传真 /Fax: 邮箱 / TT350N-0 Made In China 在使用本产品之前 : INSTRUCTION MANUAL 说明手册 中英文双语 / Chinese English Bilingual 请先仔细阅读本手册, 以确保您能安全使用 请保存好本手册以备将 来查询参考 Before using this product: Please read this user manual carefully in order to ensure your safety and the proper operation of this product. Keep for future reference.

2 前言 警告 在使用本产品之前 : 请先仔细阅读本手册, 以确保您能安全使用 请保存好本手册以备将来查询参考 感谢您购买神牛产品 该型号机顶闪光灯适用于 Nikon 系列相机, 兼容 TTL 自动闪光 使用 TTL 闪光灯, 您将获得更简单的拍摄体验, 在光线变化复杂的情况下, 可以自动获得准确的闪光曝光, 拍摄轻松自如 产品特点突出表现在以下几方面 : GN36 (m ISO 尼康相机 i-ttl 支持 TTL 自动闪光, 可作为无线多灯闪光系统的主控或从属单元, 拍摄更简单快捷 高清液晶屏显示直观, 操作更加简易 内置.4G 无线传输收发一体, 超远距离, 创意无限 功能齐全, 无限享用支持手动和频闪闪光模式, 高速同步 / 第二帘快门同步 / 闪光曝光补偿等功能 固件升级, 兼容无忧跟随原厂相机步伐, 可对软件进行再升级 请保持干燥 请勿私自拆卸产品, 如产品出现故障须由本公司或授权的维修人员进行检查维修 请勿让儿童接触本产品 禁止拆卸 撞击 挤压或投入火中, 若出现严重鼓胀, 请勿继续使用 请勿放置在超过 50 度的高温环境中 请勿将闪光灯头正对人眼闪光 ( 特别是婴儿的眼睛 ), 否则可能会在短时间内造成视力障碍 请勿在化学品 可燃性气体或其他特殊物质附近使用闪光灯, 这些物质在特殊情况下可能对闪光灯发出的瞬间强光敏感, 有可能导致火灾或电磁干扰 在这些场合下, 请注意相关警告标识 本产品不能防水, 在雨天及潮湿环境下请注意防水 若发生任何故障, 请立即关闭闪光灯电源

3 目录 E l e c t r o n i c 迅丽 TTL 机顶闪光灯 Thinklite TTL Camera Flash 本说明书中使用的约定 此使用说明书中的操作步骤假定相机和闪光灯的电源开关已开启 参考页码由 ( 第 ** 页 ) 表示 C a m e r a F l a s h 此使用说明书中使用以下警告符号 : 该 小心 符号表示避免出现拍摄问题的警告 该 注意 符号提供补充信息 前言警告部件名称机身控制面板液晶显示屏标配物品可选购附件装卸闪光灯电源管理闪光模式 :TTL 自动闪光模式闪光曝光补偿高速同步第二帘快门同步闪光模式 :M 手动闪光闪光模式 :Multi 频闪闪光无线闪光拍摄 : 无线电 (.4G) 传输无线设置设置主控闪光灯的闪光模式设置通讯频道 TTL: 全自动无线闪光拍摄 M: 动无线闪光拍摄 Multi: 手动无线闪光拍摄其他应用自动辅助对焦灯反射闪光创建眼神光 ZOOM: 设置闪光覆盖范围并使用广角散光板电池电量低警示 C.Fn: 设置自定义功能保护功能固件升级规格参数故障排除指南兼容相机列表维护保养

4 部件名称 液晶显示屏 01 0 (1) TTL 自动闪光 Zoom : 变焦显示 ( 第 18 页 ) TTL : TTL 自动闪光 焦距 ( 闪光覆盖 / 第 18 页 ) : 高速同步 ( 第 09 页 ) 闪光曝光补偿量 ()M 手动闪光 M : 手动闪光 机身 01. 眼神光板 06. 热靴 0. 内置广角散光板 07. 液晶显示屏 03. 闪光灯头 08. 固定旋钮 04. 光控传感器 09. 电池仓 05. 辅助对焦灯 10. USB 端口 (3)Multi 频闪闪光 手动闪光输出 Multi : 多重 ( 频闪 ) 闪光闪光次数闪光频率 (4) 无线电传输拍摄 主控单元 闪光组 闪光模式 控制面板 11. <MODE> 闪光模式选择按钮 1. <ZOOM>ZOOM 选择按钮 13. <SYNC> 高速同步按钮 14. <SLAVE>S1/S 光控选择 ( 在非无线模式 ) 15. < > 电源按钮 ( 复用按钮, 长按 秒 ) 18. < > 无线按钮 ( 复用按钮, 长按 秒 ) 19. < > 组别 / 频道按钮 0. 调节旋钮 ( 复用按钮, 在无线模式 ) 主控 从属单元 频道 16. < > 试闪按钮 / 回电指示灯 1. <> 设置按钮 17. < > 自定义按钮 从属

5 ZOOM SYNC SLAVE 标配物品 1 灯体 微型底座 3 保护包 4 柔光罩 5 说明书 可选购附件 可搭配本公司以下摄影附件使用, 以获得最佳的拍摄效果和使用体验 : X1T-N 无线引闪器 迷你柔光箱 反光板 蜂巢 色片 束光布等 装卸闪光灯 安装闪光灯 1 滑动闪光灯固定座使其完全插入相机的热靴插座 C.Fn 离机使用时, 建议通过自定义功能使 自动关闭电源 无效 (C.Fn-ST 第 19 页 ) 闪光模式 :TTL 自动闪光模式 该闪光灯有 TTL 自动闪光,M 手动闪光,Multi 频闪闪光三种模式 在 TTL 模式下, 相机的测光系统会侦查从主体反射回来的闪光照明, 从而自动调节闪光输出量, 使主体和背景得到均衡曝光 支持曝光补偿 高速同步 第二帘快门同步等功能 * 按下 <MODE> 模式选择按钮, 三种闪光模式将会依次出现在液晶屏上 TTL 模式 通过按 <MODE> 模式选择按钮, 将闪光灯设置为 <TTL>, 可以使闪光灯进入 TTL 模式 半按相机快门按钮进行对焦 在快门释放前的瞬间进行一次预闪, 闪光灯接收相机信息进行主闪光 HI 提示 : 当闪光功率达到最大值时, 会显示 HI 闪烁 3 秒 如果此时欠爆请调整相机的参数 ; Lo 提示 : 当闪光功率达到最小值时, 会显示 Lo 闪烁 3 秒 如果此时过爆请调整相机的参数 电源管理 拧紧闪光灯 旋转固定座上的锁定旋钮, 直到锁定闪光灯 取下闪光灯 3 旋转固定座上的锁定旋钮, 直到闪光灯解除锁定 使用电源开关控制该产品的打开 ( 长按 1 秒 ) 和关闭, 长时间不使用时请关闭电源 本产品设计有电源自动关闭功能 作为主控单元在长时间 ( 约 秒 ) 无人操作时, 闪光灯会自动关闭, 半按快门按钮或机身任意键唤醒 ; 作为从属单元 (S1/S 无线 SLAVE) 在 60 分钟无任何操作时, 闪光灯会进入休眠状态, 此时可按机身任意键唤醒 进入休眠状态 60 分钟后自动关机 闪光曝光补偿 该闪光灯可以在 ±3 档间以 1/3 档为增量调节闪光曝光补偿 由于环境的需求而需要微调 TTL 系统时, 这个功能非常有用 设置闪光曝光补偿 : 按下 按键, 进入调整状 1 态, 此时补偿量闪烁 转动调节旋钮设置曝光补偿 量 0.3 表示 1/3 档, 0.7 表示 /3 档 要取消闪光曝光补偿, 将闪光曝光补偿量设为 0 按下 < > 设置按钮, 确 3 定闪光曝光补偿

6 高速同步 使用高速同步 (FP 闪光 ), 您可以在所有的快门速度下同步使用闪光灯 高速同步模式下, 使用光圈优先对人像进行填充闪光时特别方便 选择高速同步 < > : 1 按 <SYNC> 按钮可开启高速同步功能 ; 在尼康相机机身设置中, 将闪光同步速度设置为 1/30 秒 ( 自动 FP) 或 1/50 秒 ( 自动 FP) 使用高速同步, 快门速度越高, 有效的闪光范围就越小 在高速同步模式下, 无法设置频闪闪光 连续高速同步闪光 15 次后, 闪光灯热保护功能可能会被激活 尽量不使用高速同步闪光, 因为高速同步闪光会缩短闪光管寿命 第二帘快门同步 使用慢速快门, 您可以在被摄物体后创建一条光线轨迹 在快门关闭前的瞬间闪光灯闪光 在 Nikon 相机机身设置中, 选择 Rear 闪光方式 闪光模式 :M 手动闪光 在 Nikon 相机机身设置中, 选择 Rear 闪光方式 您可以在 1/18 功率至 1/1 全功率间以 1/3 档为增量设置闪光输出 为 获得正确的闪光曝光, 请使用手持的闪光测光表确定所需的闪光输出 按 <MODE> 模式选择按钮, 1 屏幕显示 <M> 转动调节旋钮设置闪光输出 功率 在高速同步模式, 可调闪光范围 1/16~1/1 S1 光控单元设置 在 M 手动闪光模式下, 按 <SLAVE> 可以使用 S1 功能, 闪光灯可作为副灯使用, 创造多种照明效果, 适用于手动闪光环境 它会与主闪光灯的第一次闪光同步触发闪光, 效果与使用无线引闪器一致 S 光控单元设置 在 M 手动闪光模式下, 按 <SLAVE> 可以使用 S 功能, 闪光灯可作为副灯使用, 适用于 TTL 闪光环境 具有防预闪功能, 使用带一次预闪功能的相机能用光控实现同步拍摄 它会与主闪光灯的第二次闪光同步触发闪光, 即 次光控引闪 只有在 M 模式下才支持 S1/S 光控引闪模式 闪光模式 :Multi 频闪闪光 使用频闪闪光, 可以发出一系列快速的闪光 它可以在一张照片上拍摄移动物体的多个图像 您可以设置闪光频率 ( 每秒的闪光次数, 以 Hz 表示 ) 闪光次数和闪光输出 按 <MODE> 闪光模式选择按 1 钮, 屏幕显示 <Multi> 转动调节旋钮设置闪光输出 功率 显示闪光输出 拍摄过程中更改闪光输出时, 下表将清楚地显示光圈值是如何更改的, 如 1/-0.3 1/+0.3 您可以在增加或减少闪光输出时查看光圈值的更改规律 例如, 将闪光输出量减少至 1/ 1/-0.3 或 1/-0.7, 然后再将其增加至大于 1/ 1/+0.3 1/+0.7 时, 将显示 1/1 1/1 1/ /+0.7 1/ /+0.3 减少闪光输出指数 1/ 1/-0.3 1/ /-0.7 1/ /4 计算快门速度 设置闪光频率和闪光次数 3 按 按钮选择闪光频率, 旋转调节旋钮设定数字 再按 按钮选择闪光次数, 旋转调节旋钮设定数字 在频闪闪光过程中, 到闪光停止为止快门应保持开启状态 使用下面的公式计算快门速度, 然后用相机进行设置 增加闪光输出指数 在 M 模式下, 可以实现高速同步和第二帘快门同步功能 ( 第 09 页 )

7 闪光次数 / 闪光频率 = 快门速度例如, 如果闪光次数是 10, 闪光频率是 5Hz, 快门速度则至少为 秒 为防止闪光灯头过热并损坏, 请勿执行连续 10 次以上的频闪闪光连拍 闪光 10 次后, 请让闪光灯至少冷却 15 分钟 如果您试图执行连续 10 次以上的频闪闪光连拍, 为防止闪光灯头过热, 闪光可能自动停止 如果发生了这种情况, 请让闪光灯至少冷却 15 分钟 反光很强的被摄体在暗背景前使用频闪闪光更加有效 推荐使用三脚架和遥控开关 频闪闪光时也可以使用 bulb 如果闪光次数显示为 --, 则闪光灯会连续闪光, 直到快门或电池耗尽 如下表所示, 闪光次数将受到限制 最大频闪闪光次数 闪 Hz 光输出 1/ 即使有多个从属单元, 主控单元也可通过无线控制控制所有的闪光灯 本说明手册中, 主控单元 指安装在相机上的闪光灯, 从属单元 指通过无线控制的闪光灯 1 无线设置 您可以在普通闪光和无线闪光之间切换 对于普通闪光, 请务必将无线设置设为 关 ZOOM SYNC SLAVE 主控单元设置 长按 <SYNC> 按钮 秒, 直 1 至 < > 闪烁 旋转调节旋钮令频幕显示 < >, 表示主控单元 1/8 1/16 1/3 1/64 1/ ZOOM SYNC SLAVE 从属单元设置长按 <SYNC> 按钮 秒, 直 1 至 < > 闪烁 旋转调节旋钮令频幕显示 < >, 表示从属单元 无线闪光拍摄 : 无线电 (.4G) 传输 无线电创意系统, 支持创建三个从属单元组, 并实现 TTL 自动闪光 您可以通过 TTL 自动闪光轻松获取多种照明效果 使用主控单元按组分别设置的任何 TTL 自动闪光, 手动闪光和频闪闪光设置都会被自动传输到从属单元 因此, 在拍摄时无需操作从属单元 只需在主控单元上对每个从属组进行单独设置就可完成 将此产品设置为主控单元时, 可以在 TTL/M/Multi/OFF 四种闪光模式下工作 设置主控闪光灯的闪光模式按 < SLAVE > 按钮选择 1 ZOOM SYNC SLAVE M/A/B/C 组别, 再按 <MODE> 按钮选择主控单 元的闪光模式可以在 OFF / TTL / M 之间进行切换, 选择其中一种作为主控单元的闪光模式 TT350N 使用神牛.4G 无线 X 系统, 可以与本厂其他型号完美结合使用 *TT350N 作为主控单元, 可控制从属单元型号 : AD600 AD600M AD360II-C AD360II-N V860IIN V850II TT685N TT600 *TT350N 作为从属单元, 可受控主控单元型号 : X1T-N V860IIN V850II TT685N TT600 长按 <MODE> 按钮 秒可切 换至 Multi 模式

8 ZOOM SYNC SLAVE 3 设置通讯频道 如果在拍摄现场不止一个无线闪光系统, 您可以通过更改通讯频道来防止信号干扰 保证主控单元和从属单元设置为相同的频道编号即可 长按 <SLAVE> 按钮 秒直至 1 ZOOM SYNC SLAVE 频道值闪烁, 旋转调节旋钮从 1 至 16 中选择频道 5 M: 手动无线闪光拍摄 使用手动闪光的无线 ( 多重闪光 ) 拍摄, 可以为每个从属单元 ( 闪光组 ) 设定不同的闪光输出进行拍摄 在主控单元上设定所有参数 将闪光模式设为 <M> 1 按下 <MODE> 按钮, 选择 M 模式 按下 <> 设置按钮确定 设置闪光输出 旋转调节旋钮为闪光组设定闪光输出 4 TTL: 全自动无线闪光拍摄 使用一个从属单元闪光设置主控单元 1 将安装在相机上的 TT350N 设为主控单元 ( 第 1 页 ) M/A/B/C 都可独立设置为 TTL 设置从属单元 将要被无线控制 TT350N 设为从属单元 ( 第 1 页 ) 可以选择 A/B/C 检查传输频道 3 将主控单元和从属单元的频道设为一致 ( 第 13 页 ) 定位相机和闪光灯 4 将其定位在 ( 第 15 页 ) 所示的范围内 检查操作 5 按下主控闪光灯的试闪按钮 < > 从属单元闪光 如果从属单元不闪光, 检查是否将其放置在操作范围内 拍摄照片 3 各组以设定的闪光光比闪光 6 Multi: 手动无线闪光拍摄设定 <Multi> 频闪模式 1 长按 <MODE> 按钮 秒, 令屏幕显示 <Multi> 如再 长按 <MODE> 按钮 秒即退出 闪光功率 / 闪光频率 / 闪光次 数设置 在 M 组状态下可设置闪光功率 频率 次数 设定频闪闪光设置 ( 第 10 页 ) 在 A B C 组只可通过 <MODE> 按钮控制从属单元的 ON/OFF 如果从属单元附近有 wifi 路由器等.4G 的设备, 可能会存在干扰导致闪光灯漏闪 如有此情况发生请调节频道或者关闭.4G 设备

9 使具有无线电传输无线拍摄功能的闪光灯 ( 主控 / 从属 ), 可按照与普通 TTL 自动闪光拍摄同样的方法, 轻松利用高级无线多重闪光照明进行拍摄 基本相对位置和操作范围如图所示, 只要将主控单元设定为 <TTL> 就可以进行无线自动闪光拍摄 用三个从属组进行自动闪光拍摄 定位和操作范围 ( 无线闪光拍摄的示例 ) 使用一个从属单元进行自动闪光拍摄 A C ( 主控 ) B ( 从属 ) 传输距离约 30 米 使用附带的微型支架定位从属单元 开始拍摄前请进行测试闪光和试拍 受从属单元的位置 周围环境 天气状况等影响, 传输距离可能更短 无线多重闪光拍摄 可以将从属单元分割为两个或三个组同时进行 TTL 自动闪光拍摄 此外, 可以为各闪光组 ( 最多 3 个组 ) 设定并用不同的闪光模式拍摄 用两个从属组进行自动闪光拍摄 其他应用 自动辅助对焦灯 在低亮度或低对比度的拍摄情况下, 闪光灯内置的自动对焦辅助灯将开启, 使自动对焦更容易 当对焦困难时, 红色辅助对焦灯亮起 ; 当对焦准确, 辅助对焦灯自动熄灭 如想关闭自动辅助对焦功能, 在 C.Fn 设置 AF 至 OFF 位置 中央 边缘 有效范围 0.6~4 米 0.6~.5 米 A B

10 反射闪光 通过将闪光灯头指向墙壁或天花板, 闪光在照亮被摄体前被墙面反射 这可以减轻被摄物体背后的阴影, 获得更自然的摄影效果 称之为反射闪光 旋转闪光灯头来设置反射方向 ZOOM: 设置闪光覆盖范围并使用广角散光板 该闪光灯有两种变焦方式 : 自动变焦和手动变焦 可以设置闪光覆盖范围以匹配 毫米的镜头焦距 自动变焦时, 焦距会随相机变焦镜头的改变而变化, 以提供最佳闪光效果 同样, 使用内置的广角散光板, 闪光覆盖范围可以扩展为 14 毫米广角镜头 ZOOM SYNC SLAVE 手动变焦时, 按下 <ZOOM> 设置按钮 转动调节旋钮更改闪光覆盖范围 在显示 < AU> 状态下, 将自动设置闪光覆盖范围 如果手动设置闪光覆盖范围, 确保其覆盖镜头焦距, 这样照片就不会出现阴影边缘 低电量警示时,ZOOM 值将无法调整, 自动固定在 4mm 如果墙壁或天花板太远, 反射闪光可能太弱并导致曝光不足 墙壁或天花板应该是平坦的 白色的以利于高效的反射 如果反射表面不是白色的, 照片将出现偏色 创建眼神光 使用眼神光板, 您可以在被摄体的眼睛中创建眼神光以使面部表情更加生动 1 将闪光灯头向上旋转 拉出广角散光板, 同时弹出 眼神光板 使用广角散光板 拉出广角散光板并将其置于闪光灯头上 闪光覆盖范围将扩展至 14 毫米 同时弹出眼神光板 请推回眼神光板 当拉出广角散光板, ZOOM 值会固定在 14mm, <ZOOM> 按钮不起作用 电池电量低时, 电池符号 < 烁, 此时请更换电池 > 会闪 低电量警示时,ZOOM 值将无法调整, 自动固定在 4mm 推入广角散光板 3 仅推入广角散光板 按照反射闪光中相同的步 骤进行 请将闪光灯头向前指然后向上旋转 度 如果左右旋转闪光灯头就 不会产生眼神光 要获得最好的眼神光效果, 被摄体不能处于相机 1.5 米 /4.9 英尺以内

11 C.Fn: 设置自定义功能 请对照以下图表本机应用栏, 使用自定义功能来完成设置 高速同步模式下, 激活热保护功能的连续闪光次数 : 功率 次数 1/1 15 自定义 功能 设置符号 设置和说明 1/(+0.3,+0.7); 0 功能符号 1/4(+0.3,+0.7) 30 ST 自动休眠 (standby) ON 启动 1/8(+0.3,+0.7); AF BL 自动对焦辅助光闪光背光控制 OF ON OF 10 秒 OF ON 关闭启动关闭 10 秒后自动熄灭一直熄灭一直点亮 1. 长按 < ZOOM > 按钮 秒, 直到显示 C.Fn 菜单. 旋转调节旋钮选择自定义功能 3. 按 < > 设置按钮, 自定义功能编号闪烁 4. 旋转调节旋钮设置想要的编号, 按 <> 按钮确定 5. 按 <ZOOM> 退出 C.Fn 菜单 1/16(+0.3,+0.7). 其他保护 为了保证设备安全的工作, 系统时刻进行预防保护, 以下提示符号 供您参考 : LCD 显示 E1 E3 E9 警示内容 40 闪光灯回电系统出现问题, 无法回电引闪, 请重新开机, 如无法解决请维修 闪光灯管两端电压过高, 请维修 固件升级有误, 请进行正确固件升级 保护功能 1. 热保护 为防止闪光灯头过热并损坏, 请勿在 1/1 功率时进行超过 30 次的快速连续闪光 30 次连续闪光后, 要让闪光灯至少冷却 10 分钟 如您在进行超过 30 次连续闪光后马上继续进行更多次闪光, 内部的防过热功能可能会被激活, 使充电时间变为 10 秒以上 如果发生这种现象, 请让闪光灯冷却约 10 分钟, 闪光灯便会恢复正常 热保护启动后, 显示屏上 激活热保护功能的连续闪光次数 : 功率 1/1 1/ / / 1/4(+0.3,+0.7) 1/8(+0.3,+0.7) 1/16(+0.3,+0.7) 1/3(+0.3,+0.7) 1/64(+0.3,+0.7) 1/18(+0.3,+0.7) 次数 的符号会显示 固件升级 本机通过 USB 插座可进行固件升级 软件最新公告及说明将会发布在官方网站上 注 : 本品出厂不配 USB 升级线, 请另行购买 普通的 USB 线可使用, 本产品 USB 口为 Micro USB 接口 查看版本号 : 按住 <MODE> 按钮然后开机, 显示 U-1.0, 表示 1.0 版本 - 0 -

12 规格参数 故障排除指南 型号 类型兼容相机闪光指数 (1/1 档位 ;105mm 焦距 ) 闪光覆盖范围闪光持续时间 (t0.1) TT350N Nikon 尼康相机 ( 参考兼容相机列表 ) 36(m ISO 100) 毫米 自动变焦 ( 自动设置适合镜头焦距和图像尺寸的闪光覆盖范围 ) 手动变焦 闪光灯头旋转 / 倾斜, 水平 0~70, 垂直 -7 ~ ( 反射闪光 ) 1/350 秒 -1/0000 秒 如果遇到问题, 请参阅此故障排除指南 闪光灯不充电 电池安装方向错误 以正确的方向安装电池 闪光灯的内置电池耗尽 如果闪光灯 LCD 屏幕上 < > 显示并闪烁, 表明需要更换电池 闪光灯不闪光 闪光灯没有牢固地安装在相机上 将闪光灯的固定座牢固地安装在相机上 闪光灯和相机的电子触点变脏 请清洁触点 曝光控制曝光控制系统 TTL 自动闪光 手动闪光闪光曝光补偿 (FEC) 手动, 闪光包围曝光 : 在 ±3 档间以 1/3 档为增量调节 ( 可以组合使用手动闪光曝光补偿 ) 同步方式高速同步 ( 最高 1/8000 秒 ), 前帘同步, 后帘同步频闪闪光具备 ( 次数 : 次 ;99Hz) 无线闪光 ( 无线电.4G 传输 ) 无线功能主控单元, 从属单元, 关闭可控制从属单元组 3 组 :A, B,C 传输范围 ( 约 ) 30 米频道 16 组 :1~16 自动对焦辅助光有效范围 ( 约 ) 中央 :0.6-4 米 / 边缘 : 米 电源 AA 型电池镍氢电池 ( 推荐 ) 或 LR6 类型碱性电池 * 节回电时间约 秒 ( 松下 eneloop 镍氢电池 ), 闪光灯准备就绪,LED 红色指示灯亮起全功率闪光次数约 10 次 (500mA 镍氢电池 ) 节能闪光灯在无人操作 秒左右将会自动关闭电源 设置为从属单元时 60 分钟进入休眠状态 同步触发方式热靴, 光控 电源自动关闭 当灯作为主控单元时, 秒无操作后, 自动电源关闭功能生效 半按快门按钮或机身任意按键唤醒 作为从属单元在 60 分钟无任何操作时, 闪光灯会进入休眠状态 可按机身任意按键唤醒 自动变焦不工作 闪光灯没有牢固地安装在相机上 将闪光灯的固定座牢固地安装在相机上 闪光曝光不足或过度 使用高速同步 使用高速同步, 有效的闪光范围会更小 确保被摄体位于显示的有效闪光范围内 闪光灯使用手动曝光模式 改为 TTL 模式或修改闪光输出功率设置 相片出现暗角或者被摄物体只有局部能照亮 相机镜头焦距超出闪光灯的覆盖范围 请检查闪光灯当前的覆盖焦距 本产品的灯头变焦范围是中画幅系统的 4-105mm, 您可以尝试拉出广角闪光板, 以扩大闪光范围 尺寸 体积 净重 ( 不含电池 ) 140*6*38 mm 00g

13 兼容相机列表 本机可兼容以下 Nikon 照相机型号 : D800 D700 D7100 D7000 D500 D5100 D5000 D300 D300S D300 D3100 D3000 D00 D70S D810 D610 D D750 注 : 1. 此表格仅列举目前已测试的相机型号, 未涵盖所有 Nikon 照相机 其他相机型号, 用户可自行测试. 本公司保留未来修改此表格内容的权利 维护保养 闪光灯在工作时, 如发现异常, 应立即关掉电源, 查明原因 灯体应避免震动, 平时注意表面除尘 灯体稍有发热为正常现象, 无特别需要时, 勿连续引闪 闪光灯的所有维修概由本厂指定可供原厂配件之维修部负责 1 年保修, 消耗品如灯管等, 不在 1 年保修范围 经发现, 擅自检修此闪光灯的, 将取消闪光灯之一年保修期, 维修需要收取相关费用 如果本品出现故障或者被水淋湿, 在专业人员维修后方可继续使用 如有技术更改, 恕不另行通知

14 Foreword Warning Thank you for purchasing this product. This TT350N camera flash applies to Nikon series cameras and is compatible with TTL autoflash. With this TTL compatible flash, your shooting will become simpler. You can easily achieve a correct flash exposure even in complex light-changing environments. This camera flash features: GN36 (m ISO Fully support Nikon i-ttl camera flash. Workable as Master or Slave unit in a wireless flash group. With built-in.4ghz wireless remote system to support transmitting and receiving. Provided multiple functions, include manual flash, multi flash, HSS (up to 1/8000s), second curtain sync, FEC, etc. Support with firmware upgrade. Always keep this product dry. Do not use in rain or in damp conditions. Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center. Keep out of reach of children. Stop using this product if it breaks open due to extrusion, falling or strong hit. Otherwise, electric shock may occur if you touch the electronic parts inside it. Do not fire the flash directly into the eyes (especially those of babies) within short distances. Otherwise visual impairment may occur. Do not use the flash unit in the presence of flammable gases, chemicals and other similar materials. In certain circumstance, these materials may be sensitive to the strong light emitting from this flash unit and fire or electromagnetic interference may result. Do not leave or store the flash unit if the ambient temperature reads over 50. Otherwise the electronic parts may be damaged. Turn off the flash unit immediately in the event of malfunction

15 E l e c t r o n i c C a m e r a F l a s h Thinklite TTL Camera Flash Conventions used in this Manual This manual is based on the assumption that both the camera and camera flash s power switches are powered on. Reference page numbers are indicated by p.**. The following alert symbols are used in this manual: The Caution symbol gives supplemental information. The Note symbol indicates a warning to prevent shooting problem Contents Foreword Warning Name of Parts Body Control Panel LCD Panel What's in the Box of TT350N? Separately Sold Accessories Attaching to a Camera Power Management Flash Mode: TTL Autoflash FEC (Flash Exposure Compensation) High-Speed Sync Second-Curtain Sync Flash Mode M: Manual Flash Flash Mode Multi: Stroboscopic Flash Wireless Flash Shooting: Radio (.4G) Transmission Wireless Settings Setting Master Unit s Flash Mode Setting the Communication Channel TTL: Fully Automatic Wireless Flash Shooting M: Wireless Flash Shooting with Manual Flash Multi: Wireless Flash Shooting with Manual Flash Other Applications Auto Focus Assist Beam Bounce Flash Creating a Catchlight ZOOM: Setting the Flash Coverage and Using the Wide Panel Low Battery Indicator C.Fn: Setting Custom Functions Protection Function Firmware Upgrade Technical Data Troubleshooting Compatible Camera Models Maintenance - 8 -

16 Name of Parts LCD Panel (1) TTL Autoflash Zoom : zoom display (Page 4) Focus length (Page 4) 01 TTL : TTL autoflash : Flash exposure compensation (Page 33) ()M Manual Flash Flash exposure compensation amount M : Manual flash Manual flash output Body 01. Catchlight Panel 0. Built-in Wide Panel 03. Flash Head 04. Optic Control Sensor 05. Focus Assist Beam Hotshoe 07. LCD Panel 08. Lock Ring 09. Battery Compartment 10. USB Port (3)Multi Flash Multi : Stroboscopic flash Number of flashes Flash frequency (4) Radio Transmission Shooting Master Unit Firing group Flash mode Control Panel 11. <MODE>Mode Selection Button 1. <ZOOM>Zoom Selection Button 13.<SYNC>High-Speed Sync Button 14. <SLAVE> S1/S Optic Slave Triggering Selection Button (in non-wireless mode) 15. < > Power Switch 16. < > Test Button / Flash Ready Indicator. 17. < >Custom Function Setting Button (reusable button, long press for seconds) 18. < > Wireless Selection Button (reusable button, long press for seconds) 19. <GR/CH> Group/Channel Button (reusable button, in wireless mode) 0. Select Dial 1.<> Set Button Master Slave Unit Slave Channel

17 What s in the Box of TT350N? 1. Flash unit. Mini stand 3. Protection case 4. Diffuser 5. Instruction manual Separately Sold Accessories The product can be used in combination with the following accessories sold separately, so as to achieve best photography effects: X1T-N wireless flash trigger, Mini softbox, White & Silver reflector, Honeycomb, Color gels, Snoot, etc. Power Management Use Power Switch to power the flash unit on (Long press the button for one second) or off. Turn off if it will not be used for an extended period of time. Setting as a master flash, it will turn the power off automatically after a certain period (approx. seconds) of idle use. Pressing the camera shutter halfway or pressing any flash button will wake up the flash unit. Setting as a slave flash, it will enter sleep mode after a certain period (adjustable, 60 minutes by default) of idle use. Pressing any flash button will wake it up. C.Fn Disabling Auto Power Off function is recommended when the flash is used off camera. (C.Fn-ST, Page 43) Flash Mode: TTL Autoflash Attaching to a Camera Attach the Camera Flash. 1 Slip the camera flash s mounting foot into the camera s hotshoe all the way. Secure the Camera Flash. Rotate the lock ring on the mounting foot until it locks up. This flash has three flash modes: TTL, Manual (M), and Multi (Stroboscopic). In TTL mode, the camera and the flash will work together to calculate the correct exposure for the subject and the background. In this mode, multiple TTL functions are available: FEC, HSS, second curtain sync, etc. * Press <MODE> Mode Selection Button and three flash modes will display on the LCD panel one by one with each pressing. TTL Mode Press <MODE> Mode Selection Button to enter TTL mode. The LCD panel will display <TTL>. Press the camera release button halfway to focus. When the shutter button is fully pressed, the flash will fire a preflash that the camera will use to calculate exposure and flash output the instant before the photo is taken. Detach the Camera Flash. 3 Rotate the lock ring on the mounting foot until it is loosened. Display HI : When the flash output value is up to the maximum value, HI will be displayed and blinking for 3 seconds. Adjust the camera s parameters if underexposure appears. Display Lo : When the flash output value is up to the minimum value, Lo will be displayed and blinking for 3 seconds. Adjust the camera s parameters if overexposure appears

18 FEC: Flash Exposure Compensation With FEC function, this flash can adjust from -3 to +3 in 1/3rd stops. It is useful in situations where minor adjusting of the TTL system is needed based on the environment. Setting FEC: Press the Button and 1 the flash exposure compensation amount will be highlighted on the LCD panel. ZOOM SYNC SLAVE Turn the Select Dial to set the amount. 0.3 means 1/3 step, 0.7 means /3 step. To cancel the flash exposure compensation, set the amount to +0. Press < > button again 3 to confirm the setting. M: Manual Flash The flash output is adjustable from 1/1 full power to 1/18th power in 1/3rd stop increments. To obtain a correct flash exposure, use a hand-held flash meter to determine the required flash output. Press < MODE > button so 1 that < M > is displayed. Turn the Select Dial to choose a desired flash output amount. In high-speed sync mode, the adjustable flash range is 1/16~1/1. Flash Output Range The following table makes it easier to see how the stop changes in terms of f/stop when you increase or decrease the flash output. For example, when you decrease the flash output to 1/, 1/-0.3, or 1/- 0.7, and then increase the flash output to more than 1/, 1/+0.3, 1/+0.7, and 1/1 will be displayed. Figures displayed when reducing flash output level High-Speed Sync High Speed Sync (FP flash) enables the flash to synchronize with all camera shutter speeds. This is convenient when you want to use aperture priority for fill-flash portraits. Choose the < > button: 1. Press the <SYNC> button to turn on high-speed sync function.. Set the Nikon camera high-speed sync to 1/30s (auto FP) or 1/50s (auto FP). With high-speed sync, the faster the shutter speed, the shorter the effective flash range. Multi flash mode cannot be set in high-speed sync mode. Over-temperature protection may be activated after 15 consecutive high-speed sync flashes. Try to avoid using high-speed sync flash, which will cut short flash tube s lifetime. Second-Curtain Sync With a slow shutter speed, you can create a light train following the subject. The flash fires right before the shutter closes. Set Nikon camera to Rear mode /1 1/ /+0.7 1/ /+0.3 1/ 1/-0.3 1/ /-0.7 1/ /4 Figures displayed when increasing flash output level In the M mode, high-speed sync and second curtain sync functions can be achieved. Optical S1 Secondary Unit Setting In M manual flash mode, press the <SLAVE> button so that this flash can function as an optic S1 secondary flash with optic sensor. With this function, the flash will fire synchronously when the main flash fires, the same effect as that by the use of radio triggers. This helps create multiple lighting effects. Optical S Secondary Unit Setting Press the <SLAVE> button so that this flash can also function as an optic S secondary flash with optic sensor in M manual flash mode. This is useful when cameras have pre-flash function. With this function, the flash will ignore a single preflash from the main flash and will only fire in response to the second, actual flash from the main unit. S1 and S optic triggering and off camera high-speed mode are only available in M manual flash mode

19 Multi: Stroboscopic Flash With stroboscopic flash, a rapid series of flashes is fired. It can be used to capture a multiple images of a moving subject in a single photograph. You can set the firing frequency (number of flashes per sec. expressed as Hz), the number of flashes, and the flash output. Maximum Stroboscopic Flashes: Flash Hz output /4 1/8 1/ Press <MODE> button so 1 that <Multi> is displayed. Turn the Select Dial to choose a desired flash output. 1/3 1/64 1/ Set the flash frequency and 3 flash times. Press the Button to select the flash frequency. Turn the Select Dial to set the number. Press the Button again to select the flash times. Turn the Select Dial to set the number. Calculating the Shutter Speed During stroboscopic flash, the shutter remains open until the firing stops. Use the formula below to calculate the shutter speed and set it with the camera. Number of Flashes / Flash Frequency = Shutter Speed For example, if the number of flashes is 10 and the firing frequency is 5 Hz, the shutter speed should be at least seconds MODE ZOOM SYNC SL To avoid overheating and deteriorating the flash head, do not use stroboscopic flash more than 10 times in succession. After 10 times, allow the camera flash to rest for at least 15 minutes. If you try to use the stroboscopic flash more than 10 times in succession, the firing might stop automatically to protect the flash head. If this happens, allow at least 15 minutes rest for the camera flash. Stroboscopic flash is most effective with a highly reflective subject against a dark background. Using a tripod and a remote control is recommended. Stroboscopic flash can be used with bulb. If the number of flashes is displayed as --, the firing will continue until the shutter closes or the battery is exhausted. The number of flashes will be limited as shown by the following table. Wireless Flash Shooting: Radio (.4G) Transmission You can set up three slave groups for TTL autoflash shooting. With TTL autoflash, you can easily create various lighting effects. Any flash settings for the slave units on the master flash in TTL mode will be automatically sent to the slave units. So the only thing you need to do is to set the master unit for each slave group without any operation for the slave units at all during the shooting. This flash can work in TTL /M /Multi / OFF flash modes when set as a master unit. When using Godox.4G wireless X system, TT350N is perfectly compatible with other products of our company. As a master unit, TT350N can control the following slave unit models: AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, TT600. As a slave unit, TT350N can be controlled by the following master unit models: X1T-N, V860IIN, V850II, TT685N, TT600. Even with multiple slave units, the master unit can control all of them via wireless. In this user manual, master unit refers to the camera flash on a camera and slave unit will be controlled by the master unit. 1. Wireless Settings You can switch between normal flash and wireless flash. For normal flash shooting, be sure to set the wireless setting to OFF. ZOOM SYNC SLAVE Master Unit Setting Long Press the <SYNC> 1 button for seconds so that < > is blinking. Turn the Select Dial until the < > is displayed on the LCD panel, which means the master unit

20 ZOOM SYNC SLAVE Slave Unit Setting Long Press the <SYNC> 1 button for seconds so that < > is blinking. Turn the Select Dial until the < > is displayed on the LCD panel, which means the slave unit.. Setting Master Unit s Flash Mode Press the <SLAVE> Button to 1 ZOOM SYNC SLAVE choose the group from M/A/B/C. Then, press the < MODE > Button so that the master unit can work in OFF / TTL / M flash mode. Choose one of them as the flash mode of master unit. Press the <MODE> Button for seconds to switch to Multi mode. 3. Setting the Communication Channel If there are other wireless flash systems nearby, you can change the channel IDs to prevent signal interference. The channel IDs of the master unit and the slave unit(s) must be set to the same. Long press the <SLAVE> 1 ZOOM SYNC SLAVE Button for seconds until the channel IDs is blinking. Turn the Select Dial to choose a channel ID from 1 to 16. Slave Unit Setting Set the TT350N that to be controlled as the wireless slave unit. (Page 37) The slave unit can be set as A/B/C. Check the communication 3 channel If the master unit and slave unit(s) are set to a different channel, set them to the same channel. (Page 37) Position the camera and 4 flashes Position the camera and flashes as the picture shows. (Page 40) Check the flash operation 5 Press the master unit s Test Button< >. Then, the slave unit will fire. If not, adjust the slave unit s angle toward the master unit and distance from the master unit. The slave unit might be out of order or fire an unwanted flash due to the nearby wifi routers or other.4g equipments. If in this case, please adjust the flash s channel or turn off the.4g equipments. ZOOM SYNC SLAVE Press the <> button to confirm. 4. TTL: Fully Automatic Wireless Flash Shooting Autoflash Shooting with One Slave Unit Master Unit Setting 1 Attach a TT350N camera flash on the camera and set it as the master unit. (Page 36) M/A/B/C can be set as TTL mode independently

21 5. M: Wireless Flash Shooting with Manual Flash This describes wireless (multiple shooting) using manual flash. You can shoot with a different flash output setting for each slave unit (firing group). Set all parameters on the master unit. Setting the flash mode to 1 <M> Press the <MODE> Button to set the flash to M mode. Setting flash output Turn the Select Dial to set the flash output of the DE ZOOM SYNC SLAVE groups. Taking the picture 3 Each group fires at the set flash ratio. 6. Multi: Wireless Flash Shooting with Manual Flash Setting <Multi> 1 stroboscopic flash. Long press the <MODE> button for seconds so that <Multi> is displayed. Long press the <MODE> button for seconds again to exit. Setting flash output/flash frequency/flash times. Setting the flash output/flash frequency/flash times of the groups in the M mode. Setting the multi flash mode. (see Page35 ) Slave/Master Unit's Positioning and Operation Range Autoflash Shooting with One Slave Unit Transmission distance is about 30m. Use the supplied mini stand to position the slave unit. Before shooting, perform a test flash and test shooting. The transmission distance might be shorter depending on the conditions such as positioning of slave units, the surrounding environment and whether conditions. Wireless Multiple Flash Shooting You can divide the slave units into two or three groups and perform TTL autoflash while changing the flash ratio (factor). In addition, you can set and shoot with a different flash mode for each firing group, for up to 3 groups. Auto Shooting with Two Slave Groups A B A, B and C group can only control the ON/OFF of the slave unit by pressing the <MODE> Button. Using a flash (master/slave) with a radio transmission wireless shooting function make it easy to shoot with advanced wireless multiple flash lighting, in the same way as TTL autoflash shooting. The basic relative position and operation range are as shown in the picture. You can then perform wireless TTL autoflash shooting just by setting the master unit to <TTL>. Auto Shooting with Three Slave Groups A C B

22 Other Applications Auto Focus Assist Beam In poorly-lit or low-contrast shooting environments, the built-in auto focus assist beam will automatically light on to make it easier for autofocus. The beam will light up only when autofocus is difficult and get out as soon as the autofocus becomes correct. If you want to turn off the auto focus assist beam, set the AF to OFF on the C.Fn settings. Position Center Periphery Effective Range 0.6~4m 0.6~.5m If the wall or ceiling is too far away, the bounced flash might be too weak and result in underexposure. The wall or ceiling should be a plain, white color for high reflectance. If the bounce surface is not white, a color cast may appear in the picture. Creating a Catchlight With the catchlight panel, you can create a catchlight in the subject s eyes to add life to the facial expression. Point the flash head upward by 1. Pull out the wide panel. The catchlight panel will come out at the same time. Bounce Flash By pointing the flash head toward a wall or ceiling, the flash will bounce off the surface before illuminating the subject. This can soften shadows behind the subject for a more natural-looking shot. This is called bounce flash. To set the bounce direction, hold the flash head and turn it to a satisfying angle Push the wide panel back in. 3 Push in only the wide panel. Follow the same procedures as for bounce flash. Point the flash head straight ahead and then upward by. The catchlight will not appear if you swing the flash head left or right. For best catchlight effect, stay 1.5m/4.9ft away from the subject. ZOOM: Setting the Flash Coverage and Using the Wide Panel The flash coverage can be set automatically or manually. It can be set to match the lens focal length from 4mm to 105mm. Also, with the built-in wide panel, the flash coverage can be expanded for 14mm wide-angle lenses. ZOOM SYNC SLAVE In Manual Zoom mode, press the <ZOOM> button. Turn the Select Dial to change the flash coverage. If < AU> is displayed, the flash coverage will be set automatically. If you set the flash coverage manually, make sure it covers the lens focal length so that the picture will not have a dark periphery. When the low battery indicator is displayed, the ZOOM can not be adjusted, it will constantly be 4mm

23 Using the Wide Panel Pull out the wide panel and place it over the flash head as shown. The flash coverage will then be extended to 14 mm. The catchlight panel will come out at the same time. Push the catchlight panel back in. Low Battery Warning If the battery power is low, < > will appear and blink on the LCD panel. P l e a s e r e p l a c e t h e b a t t e r y immediately. When the low battery indicator is displayed, the ZOOM can not be adjusted, it will constantly be 4mm. C.Fn: Setting Custom Functions The following table lists the available and unavailable custom functions of this flash. Custom Function Signs ST AF BL Auto sleep (standby) AF-assist beam Backlighting control C.Fn Custom Functions Function Setting No. Settings & Description ON OF ON OF 10 sec. OF ON ON OFF ON OFF Off in 10 sec. Always off Always lighting 1. Press the < ZOOM > Button for seconds until C.Fn menu is displayed.. Turn the Select Dial to select the Custom Functions. 3. Press the <> Button and the Setting No. blinks. 4. Turn the Select Dial to set the desired number. Pressing the <> Button will confirm the settings. 5. Press the <ZOOM> Button to exit When pull out the wide panel, the ZOOM will constantly be 14mm. The <ZOOM> button will not work. Protection Function 1. Over-Temperature Protection To avoid overheating and deteriorating the flash head, do not fire more than 30 continuous flashes in fast succession at 1/1 full power. After 30 continuous flashes, allow a rest time of at least 10 minutes. If you fire more than 30 continuous flashes and then fire more flashes in short intervals, the inner over-temperature protection function may be activated and make the recycling time over 10 seconds. If this occurs, allow a rest time of about 10 minutes, and the flash unit will then return to normal. When the over-temperature protection is started, is shown on the LCD display. Number of flashes that will activate over-temperature protection: Power Output Level 1/1 1/ / / 1/4(+0.3,+0.7) 1/8(+0.3,+0.7) 1/16(+0.3,+0.7) 1/3(+0.3,+0.7) 1/64(+0.3,+0.7) 1/18(+0.3,+0.7) Number of Flashes Number of flashes that will activate over-temperature protection in high-speed sync triggering mode: Power Output 1/1 1/(+0.3,+0.7); 1/4(+0.3,+0.7) 1/8(+0.3,+0.7); 1/16(+0.3,+0.7) Prompts on LCD Panel E1 E3 E9 Times Other Protections The system provides real-time protection to secure the device and your safety. The following lists prompts for your reference: Meaning A failure occurs on the recycling system so that the flash cannot fire. Please restart the flash unit. If the problem still exists, please send this product to a maintenance center. The voltage on two outlets of the flash tube is too high. Please send this product to a maintenance center. There are some errors occurred during the upgrading process. Please using the correct firmware upgrade method

24 Firmware Upgrade This flash supports firmware upgrade through the USB port. Update information will be released on our official website. USB connection line is not included in this product. The USB port is a standard Micro USB socket. Common USB connection line is applicable. Checking the version: Press the <MODE> Button and the turn the flash on. Then, the firmware update version (e.g. Version 1.0 will read U-1.0) will be displayed on the LCD panel. Technical Data Auto Focus Assist Beam Effective range (approx.) Center: 0.6~4m Periphery: 0.6~.5m Power Supply AA batteries Ni-MH batteries (recommended) or *LR6 alkaline batteries Recycle time Approx seconds (eneloop Ni-MH batteries of Panasonic). Red LED indicator will light up when the flash is ready. Full power flashes Approx. 10 (500mA Ni-MH batteries) Power saving Power off automatically after approx. seconds of idle operation. (60 minutes if set as slave) Sync Triggering Mode Hotshoe, optic triggering Dimensions W x H x D 140*6*38 mm Weight without battery 00g Model Type Compatible Cameras Guide No. (1/1 105mm) Flash Coverage Flash Duration (t0.1) Exposure Control Exposure control system Flash exposure compensation (FEC) Sync mode Multi flash Wireless Flash (.4G radio transmission) Wireless flash function Master, Slave, Off Controllable slave groups 3 (A, B and C) Transmission range 30m (approx.) Channels 16 (1~16) TT350N Please reference to compatible camera models 36 (m ISO 100) 4 to 105mm Auto zoom (Flash coverage set automatically to match the lens focal length and image size) Manual zoom Swinging/tilting flash head (bounce flash): 0 to 70 horizontally and -7 to vertically 1/350 to 1/0000 seconds TTL autoflash and manual flash Manual. FEB: ±3 stops in 1/3 stop increments (Manual FEC can be combined.) High-speed sync (up to 1/8000 seconds), first-curtain sync, and second-curtain sync Provided (up to times, 99Hz)

25 If there is a problem, refer to this Troubleshooting Guide. The Camera Flash cannot be charged. The battery is installed in the wrong direction. Install the battery in the correct direction. The camera flash s internal battery is exhausted. If < > appears and blinks on the LCD panel, replace the battery immediately. The Camera Flash does not fire. The camera flash is not attached securely to the camera. Attach the camera s mounting foot securely to the camera. The electrical contacts of the Camera Flash and camera are dirty. Clean the contacts. The power turns off by itself. After seconds of idle operation, auto power off took effect if the flash is set as master. Press the shutter button halfway or press any flash button to wake up. After 60 minutes of idle operation, the flash unit will enter sleep mode if it is set as slave. Press any flash button to wake up. Auto zoom does not work. The camera flash is not attached securely to the camera. Attach the camera flash s mounting foot to the camera. The flash exposure is underexposed or overexposed. You used high-speed sync. With high-speed sync, the effective flash range will be shorter. Make sure the subject is within the effective flash range displayed. You used Manual Flash mode. Set the flash mode to TTL or modify the flash output. Photos have dark corners or only parts of the target subject are illuminated. The focal length of lens exceeds the flash coverage Troubleshooting Check the flash coverage you set. This flash unit has the flash coverage between 4 and 105mm, which fits medium-format cameras. Pull the wide panel out to extend the flash coverage. Compatible Camera Models This flash unit can be used on the following Nikon camera models: D800 D300 D810 This table only lists the tested camera models, not all Nikon series cameras. For the compatibility of other camera models, a self-test is recommended. Rights to modify this table are retained. Maintenance Shut down the device immediately should abnormal operation be detected. Avoid sudden impacts and the product should be dedusted regularly. It is normal for the flash tube to be warm when in use. Avoid continuous flashes if unnecessary. Maintenance of the flash must be performed by our authorized maintenance department which can provide original accessories. This product, except consumables e.g. flash tube, is supported with a one-year warranty. Unauthorized service will void the warranty. If the product had failures or was wetted, do not use it until it is repaired by professionals. Changes made to the specifications or designs may not be reflected in this manual. FCC Warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and () this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. D700 D300S D610 D7100 D300 D D7000 D3100 D750 D500 D3000 D5100 D00 D5000 D70S