目录 Content 1. 修订履历 Modified List.3 2. 适用范围 Scope 型号 Model 外观 Appearance 4 5. 规格性能检测 Ratings 常规性能 General Performance 环境性能 Env

Size: px

Start display at page:

Download "目录 Content 1. 修订履历 Modified List.3 2. 适用范围 Scope 型号 Model 外观 Appearance 4 5. 规格性能检测 Ratings 常规性能 General Performance 环境性能 Env"

榜蝉明
7 years ago
Views:

1 产品规格书 NI-MH BATTERIES SPECIFICATIONS 产品型 (MODEL NO.) LTT-AAJ2500mAh 1.2V 户编 (CUSTOMER NO.) 规格书批 Specification Approved 制定 PREPARED CHECKED 批准 APPROVED 户批 Customer Approved CHECKED 批准 APPROVED 请签盖章确认回传 Please sign and return one copy to us 盖章处 Seal the

2 目录 Content 1. 修订履历 Modified List.3 2. 适用范围 Scope 型号 Model 外观 Appearance 4 5. 规格性能检测 Ratings 常规性能 General Performance 环境性能 Environment Performance 安全性能 Safe Characteristic 单体电池尺寸 Specifications of single cell 充放电特性 characteristic of charge/discharge 保证期 Quality guarantee period 注意事项 Cautions 7/8

3 1. 修订履历 Modified List 产品变更履历表 Product Modified Record List 版本 Revision 日期 Date 标记 Mark 变更内容 Modified Content 批准 Approved V

4 2. 适用范围 (Scope): 本说明书用于本书中涉及的镍氢电池产品 This specification is applied to the reference battery in this Specification 3 型 (MODEL) LTT-AAJ2500mAh 1.2V 4 外观 (APPEARANCE): 电池 / 电池组外观无破裂划痕变形生锈污迹电解液泄漏等良象 The cell / battery shall be free from cracks, scars, breakage, rust, discoloration, leakage and deformation. 5 规格性能检测 (RATINGS): 以项目作为评估电池的基本指标, 可据需要电池行测试 Table below can be taken as the basic guideline of evaluation the battery quality. 5.1 境温度 (ambient temperature)20 ± 5, 相湿度 (Relative Humidity): 65 ± 20% 5.2 测试工要求满足 (Testing facility must conform to the condition) 电流表 :IEC 51/IEC 485 所规定的 0.5 或以包括引线总电阻小于 0.01Ω Ampere meter: IEC 51/IEC 485 stipulated grade 0.5 or above, including the down-lead resistance totally less than 0.01Ω 内阻仪 : 交流 1KHz 弦波 4 端子测量设备 Resistance tester: AC 1 KHz sine wave 4 terminals testing equipment 6 常规性能 General Performance: 项目 Item 标准充电 Standard charge 标准放电 Standard discharge 快充电 Rapid Charge 快放电 Rapid discharge 涓流充电 Trickle Charge 标称电压 Nominal Voltage 开路电压 Open circuit voltage 标称容量 Nominal Capacity 最容量 Minimum Capacity 内阻 Internal Impedance 重量 Weight 规格条件 Specification Conditions 250 ma0.1c 境温度 20 ± 5, 相湿度 : 65 ± 20% 16 hrs 500 ma (0.2C) 1250mA0.5C 1250mA0.5C 50~125 ma (0.02C~0.05C) 1.2 V 1.25V 2500 mah 2500 mah(0.2c) 2250 mah(0.5c) 35mΩ 29.2 g ambient temperature of 20±5, Relative Humidity: 65 ± 20% 标准充电, 放电截电压 1.0V standard charge, the final voltage is 1.0V -ΔV=5~10mV 境温度 20 ± 5, 相湿度 : 65 ± 20% ambient temperature of 20±5, Relative Humidity: 65 ± 20% 标准充电, 放电截电压 1.0V standard charge, the final voltage is 1.0V Ta=-10~45 标准充电,1hrs 内测量 Within 1 hr after standard charge 标准充放电. Standard charge and Standard discharge 标准充电快放电. Standard charge and Rapid discharge 标准充电, 一小时内测量 Within 1 hr after standard charge Approx:29.2 g

5 荷电保持率标称容荷电保持率量 60%(1500mAh) 标准充满电贮藏 28 天, 标准 0.2C 放电 1.0V Charge-retention Charge retention Storage a period of 28 days after standard charge, then rate Nominal Rate Standard discharge (0.2C) to 1.0V capacity 60%(1500mAh) 循寿命 500 Cycles IEC :2003 see note 2 Cycles Test 7 境性能 Environment Performance: 储存温度 Storage Temperature 使用境温度 Operation Temperature 恒定湿热性能 Constant humidity and hot performance 8 安全性能 Safe Characteristic : Within 1 year -20~25 Within 6 months -20~35 Within 1 months -20~45 Within 1 week -20~55 Standard charge 15~25 Fast Charge 0~45 Discharge 0~45 坏损 No damage 标准充电, 在温度 33±3, 湿度 80±5% 的境中放置 14 天 Full charge the battery at current 0.1C, 33±3, 80±5%R.H., storage 14 days. 过充电特性 Over-charge 过放电特性 Over-discharge 振动测试 Vibration Test 自由跌落 Drop Test 安全性 Safety 无变形无漏液 ; 容量大于等于额定容量. No leakage nor explosion apacity 100% 无变形无漏液 ; 容量大于等于额定容量 80%No leakage nor explosion Capacity 2000mAh 电压变化 : 0.03V/ 只内阻变化 : 5 mω/ 只 Voltage variety: 0.03V/cell Internal impedance: 5 mω/cell 电压变化 : 0.03V/ 只内阻变化 : 5 mω/ 只 Voltage variety: 0.03V/cell Internal impedance: 5 mω/cell 无破裂或爆炸, 但允许漏液和变形. No disrupt or burst, explosion, but leakage of electrolyte and deformation are acceptable 将电池以 0.2CmA 放电 1.0V, 先标准充电, 再以 0.1CmA 充电 48 小时, 以 0.2CmA 放电, 测定电池容量 0.2C discharge to 1.0V, 0.1C charge for 48 hrs, then test the Capacity with Standard discharge Conditions 将电池以 0.2CmA 放电 1.0V, 然将电池串联负载 2.4Ω, 经 24 小时, 再将电池按标准充电标准放电测定电池的容量 0.2C discharge to 1.0V,Cornbine the battery with a 2.4Ω electric resistance, after stored for a period of 24 hrs, then test the Capacity with Standard discharge Conditions 0.1C 充电 16 小时, 搁置 24 小时, 振动前检测电池. 振动条件 : 振幅 1.5mm, 频率 3000CPM, 任意方向振动 60 分钟 Charge at current 0.1C for 15hrs; place for 24 hrs, check the battery before and after vibration. Vibration condition: Swing: 1.5mm, Frequency: 3000CPM, Vibrate for 1hr to any direction. 0.1C 充电 16 小时, 搁置 24 小时, 落前检测电池冲条件 : 从 1.5m 高处任意方向自由落次, 落木板表面厚度 10mm. Charge at current 0.1C for 15hrs, place for 24 hrs, check the battery before and after fall down test; Impact condition: Fall down from height 1.5m to any direction on the hard-wood board( Thickness:10mm), test for 3 times 电池在境温度 20±5 以恒流 0.2I t A 强制放电 0.0V, 然将电流提高到 1.0I t A, 并在相境温度继续强制放电 60 分钟. The battery shall undergo a forced discharge in an ambient temperature of 20±5,at a constant current of 0.2I t A,to a final voltage of 0V.the current shall then bi increased to 1.0I t A and the forced discharge continued in the same ambient temperature of 20±5,for 60 min.

6 标准充电, 在 20 ±5 境中用超过 0.75mm 2 金属丝将单颗电池短路电池恢复到常温着火爆炸短路测试 After standard charge, short-circuit the cell at 20 ±5 No fire and no External Short Circuit until the cell temperature returns to ambient explosion temperature.(cross section of the wire or connector should be more than 0.75mm 2 ) 9 单体电池尺 (Specifications of single cell): TYPE Nickel-Metal Hydride cylindrical single cell unit: MM MODEL LTT- AAJ2500mAh 1.2V H50.0±0.5 h diameter 14.0±0.5mm Dimensions Height 50.0±0.5mm Φ5.4±0.1 Φ14.0± 充放电特性 (characteristic of charge/discharge): Note 1: 标准充放电. Standard charge and Standard discharge Note 2: (1). Ambient temperature: 20±5, Relative Humidity: 65 ± 20% (2). IEC 标准循寿命测试方法 (Life test method of IEC :2003) Cycle Number Charge Stand in charged condition Discharge 1 0.1C 16hrs None 0.25C 2hrs 20min 2~ C 3hrs 10min None 0.25C 2hrs 20min C 3hrs 10min None 0.25C to 1.0V/ cell C 16hrs 1~4hr 0.20C to 1.0V/cell 重复 1 50 次循, 直某一第 50 次循的放电时间少于 3 小时 Cycles 1 to 50 shall be repeated until the discharge duration on any 50 th cycle become less than 3h.At this stage, a repeat capacity measurement as specified for 50 shall be carried out

7 11 保证期 (Quality guarantee period): 电池保质 12 个. 建议本公产品在厂时据运输距离和包装条件已充 %的电量, 贵公在检测容量时, 先用 0.2C 放电 1.0V/ 只再标准电流充放, 行容量检测补充电如果存时间 3 个或以的, 先用 0.2C 放电 1.0V/ 只, 然用 0.1C 充电 16hrs, 搁置 20min, 以 0.2C 放电 1.0V/ 只, 经活化再标准电流充放, 行容量检测首次使用时建议采用标准充电法充电, 以免电池伤害 Guarantee time for one year due to the processing and raw material defectiveness. Suggestion: The products before delivery would be charged 20-80% capacity according to the transportation distance and packing condition. While checking the capacity, please discharge the battery at 0.2C to 1.0V/cell; then charge and discharge the battery at by standard current. If the storage time over 3 months or above, please discharge the battery at the current 0.2C to 1.0V/cell, then charge the battery at 0.1C for 15 hours, after that place for 20mins, discharge the battery at 0.2C to 1.0V/cell. After this activation, check the capacity by the standard current charge and discharge the battery. The first time use suggested to take standard charge method to charge the battery to prevent from damage to battery. 12 注意事项 (Cautions):! 注意 Note 电池在使用前必须充电. Batteries should be charged prior to use. 在使用新电池前, 或者长期存放第一次使用电池, 在使用前请将电池充满电. When using a new battery for the first time or after long term storage, please fully charge the battery before use. 充电方法请参考们的规格书. For charging methods please reference to our specifications. 使用 Ni-Cd 或 Ni-MH 用充电器. Use the correct charger for Ni-Cd or Ni-MH batteries. 将电池贮存在阴凉干燥处. Store batteries in a cool dry place. 当把电池放入充电器中时, 注意保证极性确. When connecting a battery pack to a charger, ensure correct polarity. 当电池使用时, 请把它从装置取. When not using a battery, disconnect it from the device. 经过长时间存放, 电池每个行一次充放电. During long term storage, battery should be charged and discharged once every 3 months.

8 ! 警告 Warning 要电池行反充电. Do not reverse charge batteries. 要将电池短路, 那可能永久的损坏电池 Do not short circuit batteries, permanent damage to batteries may result. 要让电池处于利境中, 比如极端的温度, 深度循, 或者经常过充 / 过放电 Do not subject batteries to adverse condition such as extreme temperature, deep cycling and excessive Overcharge / over discharge. 要将电池他品牌的电池或者种类的电池, 比如碱性锌电池混用. Do not mix batteries with other battery brands or batteries of a different chemistry such as Alkaline and zinc carbon 要将新旧电池混用, 可能会导过放电. Do not mix new batteries in use with semi-used batteries, over discharge may occur 如果噪音, 温度异常, 或者漏液, 请停使用. If find any noise, excessive temperature or leakage from a battery, please stop its use. 如果电池发烫, 请勿触摸, 直冷. When the battery is hot, please do not touch it and handle it, until it has cooled down. 要把电池电池组的外套去除. Do not remove the outer sleeve from a battery pack nor cut into its housing. 电池使用时发功率降, 请关闭用电器开关以防电池过放. When find battery power down during use, please switch off the device to avoid over discharge! 危险 Danger 要燃烧或毁坏电池, 可能导毒气体释放或爆炸. Do not incinerate or mutilate batteries, may burst or release toxic material. 禁将电池在密闭境中使用. 需要保持通风 ; 否则电池可能产生氢气, 导爆炸. Avoid batteries being used in an airtight compartment. Ventilation should be provided inside the battery compartment; otherwise batteries may generate hydrogen gas, which could cause an explosion if exposed to an ignition source. 取电池组时, 用手抓插头而是拉线. Unplug a battery by holding the connector itself and not by pulling at its cord 电池使用, 如果电池发热, 再次充电前, 请在通风境中冷. After use, if the battery is hot, before recharging it, allow it to cool in a well-ventilated place out of direct sunlight. 要将电池放入水中或海水中. Never put a battery into water or seawater. 要尝试分离, 挤压, 撞电池, 电池会发热或起火. 电池中的碱液皮肤和眼睛害, 而会损伤衣服.

9 Do not attempt to take batteries apart or subject them to pressure or impact. Heat may be generated or fire may result. The alkaline electrolyte is harmful to eyes and skin, and it may damage clothing upon contact. 要使电池离儿童. 如发吞食, 立联系医生. Keep away from children. If swallowed, contact a physician at once

目录 Content 1. 修订履历 Modified List.3 2. 适用范围 Scope 型号 Model 外观 Appearance 4 5. 规格性能检测 Ratings 常规性能 General Performance 环境性能 Env

目录 Content 1. 修订履历 Modified List.3 2. 适用范围 Scope 型号 Model 外观 Appearance 4 5. 规格性能检测 Ratings 常规性能 General Performance 环境性能 Env 产品规格书 NI-MH BATTERIES SPECIFICATIONS 产品型 (MODEL NO.) 9V 250MAH 户编 (CUSTOMER NO.) T-08 规格书批 Specification Approved 制定 PREPARED CHECKED 批准 APPROVED 户批 Customer Approved CHECKED 批准 APPROVED 请签盖章确认回传 Please