BT-P48100X-6 specification

Size: px

Start display at page:

Download "BT-P48100X-6 specification"

衙印
5 years ago
Views:

1 Specification LiFePO4 battery pack Cell model: LC-FA Battery model: BT-P48100X-6 Edition: V1.0 Release date: Feb 2016 UFO SOURCE ENERGY BATTERY TECHNOLOGY Customer( 客户 ) : Battery model name( 电池型号 ): S2P 100Ah Applicable Products ( 适用产品 ): Doc.No: ( 编号 ): Spec-Pack

2 Copyright Shenzhen UFO Source Energy Technologies Co., Ltd All rights reserved. Non-written consent of the Company, any organization and individual cannot extract and copy the contents of this document, in part or in whole, in any form to disseminate. Trademark Notice UFO trademarks are all owned by Shenzhen UFO Source Energy Technologies Co., Ltd. All other trademarks or registered trademarks mentioned in this document are owned by their respective owners. Declaration 1. The specification details the performance of the LiFePO4 battery pack. Please read the specification carefully before operations and please abide by relevant industrial safety regulations. We will not be responsible for any damage to the product due to improper operations or use under conditions that are not prescribed in the specification. 2. As the product version upgrades or other reasons, this document is subject to change without notice. Unless otherwise agreed, this document only as a guide, all statements, information, and recommendations in this document do not constitute any express or implied warranty.

3 1 Scope( 适用范围 ) This specification is applied to the reference battery in this Specification. 本说明书适用于本书中所提及的电池 2 Product Specification( 产品技术规格 ) Table 1 ( 表 1) No. ( 序号 ) Cell 单体电芯 Item ( 项目 ) Rated Capacity ( 额定容量 ) Nominal Voltage ( 正常电压 ) Internal Impedance ( 内阻 ) Dimension ( 尺寸 ) Weight ( 重量 ) Standard charge ( 标准充电 ) Rapid Charge 快速充电 Standard discharge ( 标准放电 ) Maximum discharge current 最大放电持续电流 Volumetric specific energy ( 体积比能量 ) Gravimetric specific energy ( 质量比能量 ) Typical ( 标称容量 ) Minimum ( 最小容量 ) General Parameter ( 常规参数 ) 3.2V 50Ah 50Ah <3.0 mω Thickness/ 厚度 :Max 27mm Width/ 宽度 :Max 136mm Height/ 高度 :Max 182mm 1450g Constant Current 0.2C 5 A Constant Voltage 3.6V 0.02C 5 A cut-off ( 持续电流 :0.2C 5 A 持续电压 :3.6V 截止电流 :0.02C 5 A Constant Current 1C 5 A Constant Voltage 3.6V 0.01C 5 A cut-off ( 持续电流 : 1C 5 A 持续电压 :3.6V 截止电流 :0.01C 5 A Constant current 0.2C 5 A end voltage 2.8 V ( 持续电流 : 0.2C 5 A 截止电压 : 2.8V) Constant current:2c 5 A end voltage:2.5 V ( 持续电流 2C 5 A 截止电压 : 2.5V) Remark ( 备注 ) Standard discharge(0.2c 5 A) after Standard charge ( 标准充电后 0.2C 5 A 标准放电 ) Mean Operation Voltage ( 即工作电压 ) Internal resistance measured at AC 1KH Z after 50% charge ( 半电态下用交流法测量内阻 ) The measure must uses the new batteries that within one week after shipment and cycles less than 5 times ( 使用出货后不到一个星期及循环次数少于 5 次的新电池测量 ) Initial Dimension ( 初始尺寸 ) APPROX Charge time : Approx6h Charge time : Approx3h 10A 100A 244 WH/L APPROX 110WH/KG APPROX

4 Table 2( 表 2) No. ( 序号 ) Item ( 项目 ) General Parameter ( 常规参数 ) Remark ( 备注 ) 1 Combination method ( 组合方式 ) 15S2P 2 3 Rated Capacity ( 额定容量 ) Factory Voltage ( 出厂电压 ) Typical ( 标称容量 ) Minimum ( 最小容量 ) 100Ah 100Ah V Standard discharge after Standard charge(package) ( 标准充电后标准放电 ( 针对电池组 )) Mean Operation Voltage ( 即工作电压 ) 4 Voltage at end of Discharge ( 放电终止电压 ) V Discharge Cut-off Voltage ( 放电截止电压 ) Package 电池组 Charging Voltage ( 充电电压 ) Internal Impedance ( 内阻 ) Standard charge ( 标准充电 ) Standard discharge ( 标准放电 ) Maximum Continuous Charge Current ( 最大充电持续电流 ) V 100mΩ Constant Current 20A Constant Voltage see No CA cut-off ( 持续电流 :20A 持续电压 : 见序号 5 截止电流 :0.01CA) Constant current:20a end voltage see NO.4 ( 持续电流 :20A 截止电压 : 见序号 4) 50A Internal resistance measured at AC 1KH Z after 50% charge ( 半电态下用交流法测量内阻 ) The measure must uses the new batteries that within one week after shipment and cycles less than 5 times ( 使用出货后不到一个星期及循环次数少于 5 次的新电池测量 ) Charge time : Approx 6 h ( 充电时间 : 大约 6 个小时 )

5 Continuous the table 2 ( 续表 2) No. Item ( 序号 ) ( 项目 ) Maximum Continuous 10 Discharge Current ( 最大放电持续电流 ) General Parameter ( 常规参数 ) 50A Remark ( 备注 ) 11 Operation Temperature Range ( 工作温度范围 ) Charge( 充电 ): 0~45 Discharge( 放电 ): -20~55 60±25%R.H. Bare Cell ( 单体电池储存湿度范围 ) Package 电池组 Storage Temperature Range ( 储存温度范围 ) Dimensions ( 尺寸 ) Weight ( 重量 ) Volumetric specific energy ( 体积比能量 ) Gravimetric specific energy ( 质量比能量 ) Less than 12 months : -10~35 ( 小于 12 月 :-10~35 ) less than 3 months: -10~45 ( 小于 3 个月 :-10~45 ) Less than 7 day : -20~65 ( 小于 7 天 :-20~65 ) 60±25%R.H. at the shipment state ( 出货状态时的湿度范围 ) 442*400*220 mm Include case 53kg Include case 105 WH/L Include case 90.5WH/KG Include case 3 Battery Management System( 电池管理系统 ) 3.1 BMS Specification( 电池管理系统说明 ) 1. The BMS is designed for 15/16 series lithium battery.(bms 为 15/16 串锂离子电池设计 ) 2. The BMS have all functions which are :( 该 BMS 系统具有以下一些功能 ) overcharge detection function( 过充电保护功能 ) over discharge detection function( 过放电保护功能 ) over current detection function( 过电流保护功能 ) short detection function( 短路保护功能 ) Temperature detection function 温度保护功能 balance function( 均衡功能 ) communicate function ( 通讯功能 ) Alarm function ( 告警功能 )

6 3.2 BMS Protect parameter( 电池管理系统保护参数 ) 48V 15S 磷酸铁锂保护线路模块设定 Typical value specifications Items Details Standard Cell overcharge protection Cell over-discharge protection Overcharge detection voltage Overcharge detection delay time Overcharge release voltage Over-discharge detection voltage Over-discharge detection delay time Over-discharge release voltage 3.90±0.025V Typical:1.0s 3.45±0.02V 2.75±0.02V Typical:1.0s 3.05±0.02V or charge release discharge Over-current protection current1 60±2A discharge Over-current detection delay time 1 1S Over-current protection discharge Over-current protection current 2 80±5A discharge Over-current detection delay time 2 100ms Charge OC protection current 60±5A Short protection current 150±10A Short protection Protection condition Detection delay time Protection release condition Load short 800us Charging release Charge high T protection 78±2 Charge high T recover 60±5 Discharge high T protection 78±2 Temperature(T) protection Discharge high T recover 60±5 Charge low T protection -5±2 Charge low T recover 0±2 Discharge low T protection -20±5 Discharge low T recover -15±5 Balance Balance threshold voltage 3.45V Communication It has RS232 and RS485 standard communication interface, it can real-time monitoring the capacity of battery bank, the voltage, current, environment temperature, and charging/discharging current. Alarm It has over-temperature, over charge, under-voltage, over-current, short circuit alarm function.

7 4. Case Structure of Battery Pack No Description Silk-screen Function Definition 1 Air switch 2 Handle 3 Barrier terminal block + Positive/ Negative terminal 4 Hanger For mounting the battery pack 5 Reset button RST For reset the battery 6 RS485 port RS485 RS485 bus interface 7 Dial switch ADS Set the address 8 LED CAPACITY Capacity indicator 9 RS232 port RS232 RS232 bus interface 10 LED ALM Alarm indicator 11 LED RUN Operation indicator

8 5 Packaging of Battery Pack 5.1. Inner packing material: EPE foam, overall dimension: mm 5.2. Seven layers of corrugated packaging on the outside, overall dimension: mm 6 Transportation 6.1 Placing on pallet during transportation, 4 boxes on each layer, and a total of 2 layers. 6.2 Shall pay attention to moisture and dampness during transportation, avoiding the extrusion and collision so as to preventing the battery from damaging.

9 7. Appendix

10 Discharge curve

11 Charge curve

LH_Series_Rev2014.pdf

LH_Series_Rev2014.pdf REMINDERS Product information in this catalog is as of October 2013. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check