ATON5_EN_CN.pdf

Size: px

Start display at page:

Download "ATON5_EN_CN.pdf"

蛤死陶
7 years ago
Views:

1 ATON 5 USER GUIDE EN CN ECE R-44/04 Gr. 0+ / 0-13kg (ca. 0-18M)

2 2 EN WARNING! This short manual serves as an overview only. For maximum protection and best comfort for your child it is essential to read and follow the entire instruction manual carefully. Correct Order: Baby seat initial setup - fasten child - fasten baby seat in the car.

3 CONTENT EN CN CLICK Short instruction

4 ATON 5 Aton 5 APPROVAL CYBEX Aton 5 baby car seat ECE R44/04 group 0+ Age: To approximately 18 months Weight: Up to 13 kg Only suitable for use in the listed safety-belts, approved to ECE Regulation No. 16 or other equivalent standards. 04/2015 4

5 EN CN 5

6 DEAR CUSTOMER Thank you very much for purchasing the CYBEX Aton 5. We assure you that in the development process of the CYBEX Aton 5 we focused on safety, comfort and user friendliness. The product is manufactured under special quality surveillance and complies with the strictest safety requirements.! WARNING! For proper protection of your child, it is essential to use and install the CYBEX ATON 3S according to the instructions given in this manual. NOTE! According to local codes the product characteristic can be different. NOTE! Please always have the instruction manual at hand and store it in the dedicated slot under the seat.! 6

7 EN CONTENT EN SHORT INSTRUCTION... 3 APPROVAL... 4 DEAR CUSTOMER... 6 THE BEST POSITION IN THE CAR... 8 FOR THE PROTECTION OF YOUR CAR CARRYING HANDLE ADJUSTMENT ADJUSTING THE HEADREST SECURING BY MEANS OF HARNESS SYSTEM SAFETY FOR YOUR BABY SAFETY IN THE CAR INSTALLING THE SEAT REMOVING THE CAR SEAT SECURING YOUR CHILD CORRECTLY INSTALLING THE BABY SEAT CORRECTLY REMOVING THE INSERT OPENING THE CANOPY CYBEX TRAVEL-SYSTEM DEMOUNTING PRODUCT CARE WHAT TO DO AFTER AN ACCIDENT CLEANING REMOVING THE COVER ATTACHING THE SEAT COVERS DURABILITY OF PRODUCT DISPOSAL PRODUCT INFORMATION WARRANTY CN 7

8 THE BEST POSITION IN THE CAR WARNING! Approval of the seat expires immediately in case of NOTE! High volume front-airbags expand explosively. This can result in the death or injury of the child. WARNING! Do not use the ATON 3S in front seats equipped with activated front-airbag. This does not apply to so-called sideairbags. NOTE! If the baby seat is not stable or sits too steeply in the car, you can use a blanket or a towel to compensate. Alternatively, you should choose another place in the car. 8

9 EN CN 9

10 10 WARNING! Never hold a baby on your lap while driving. Due to the enormous forces released in an accident, it will be impossible to hold onto the baby. Never use the same seat belt to secure yourself and the child. FOR THE PROTECTION OF YOUR CAR It is possible that some car seats that are made of soft material (e.g. velours, leather, etc.) may show signs of usage and/or discolouration. In order to avoid this, you could, for example, place a cover or towel underneath it.

11 EN CN 11

12 In this context, we would also like to refer to you to our cleaning instructions, which must absolutely seat. CARRYING HANDLE ADJUSTMENT WARNING! Always secure the baby with the integrated harness system. The carrying handle can be adjusted into 4 different positions: A: Carrying/Driving-Position. B+C: For placing the baby in the seat. D: Safe sitting position outside the car. WARNING! In order to avoid unwanted tilting of the seat whilst carrying, make sure that the handle is locked in the carrying position A. 12

13 EN CN 13

14 In order to adjust the handle press buttons b on left and right side on the handle a. Adjust the carrying handle a to the desired position by pressing the buttons b. ADJUSTING THE HEADREST Only when adjusted to the most suitable height does the headrest offer your child the highest degree of protection and safety. The height of the headrest can be adjusted to eight different positions. 14

15 EN CN 15

16 r The headrest must be adjusted to headrest. Activate the adjustable handle ring on the upper side of the headrest b and bring the headrest into the required position. In the lowest positions of the headrest, the seat insert can be used as a newborn support by simply folding the lower part. 16

17 EN CN 17

18 18 SECURING BY MEANS OF HARNESS SYSTEM to the headrest and must not be adjusted separately. Make sure that the headrest is correctly locked in place before you use the seat. NOTE! Make sure that the child seat is free of toys and hard objects. Loosen the shoulder belts by activating the adjustment handle on the central adjuster and simultaneously pulling both shoulder belts upwards. Open the belt buckle e by pressing NOTE! Always pull on the shoulder belt c never pull on the shoulder pads d. Put the child in the child seat. NOTE! Make sure that the shoulder belts c are not twisted or crossed over.

19 EN CN 19

20 Bring both belt tongues t together and lock them into place in the belt buckle e with an audible CLICK. Gently and cautiously pull on the central adjuster belt g, in order to tighten the shoulder belts c until they lie against the body of your child. NOTE! In order to gain optimum protection from the Cybex Aton 5, the shoulder belts c should lie as close as possible to the body. SAFETY FOR YOUR BABY NOTE! Always secure the baby in the child seat and never leave your child unattended when putting the Aton 5 on elevated surfaces (e.g. diaper changing table, table, bench...). 20

21 EN CN 21

22 WARNING! Plastic parts of Aton 5 heat up in the sun. Your baby may get burnt. Protect your baby and the car seat from intense exposure to the sun (e.g. putting a white blanket over the seat). Take your baby out of the car seat as often as possible in order to relax its spine. Interrupt longer journeys. Remember this as well, when using the Aton 5 outside the car. NOTE! Never leave your child in the car unattended. 22

23 EN CN 23

24 SAFETY IN THE CAR In order to guarantee the best possible safety for all passengers make sure that... foldable backrests in the car are locked in their upright position when installing the Aton 5 on the front passenger seat, adjust the car seat in rearmost position WARNING! Never use the Aton 5 on a car seat equipped with a frontairbag. This does not apply to so-called side airbags. you properly secure all objects likely to cause injury in the case of an accident all passengers in the car are buckled up WARNING! Do not use any load bearing contact points other than those described in the instructions and marked in the child restraint. 24 WARNING! Always ensure that the individual components of the child seat are never compressed or jammed (e.g. by the car door or while adjusting the back seat.)

25 EN CN 25

26 WARNING! The child seat must always be secured with the seat belt even if not in use. In case of an emergency brake or accident, an unsecured child seat may injure other passengers or yourself. 26 INSTALLING THE SEAT Make sure that the carrying handle a is in the upper position A. (see page 10) Place the seat against driving position on the car seat. (The feet of the baby point in the direction of the backrest of the car seat). CYBEX Aton 5 can be used on all seats with a three-point automatic retractor belt. We generally recommend to use the seat in the back of the vehicle. In the front, your child is usually exposed to higher risks in case of an accident.

27 EN CN 27

28 WARNING! The seat must not be used with a two-point belt or a lap belt. When securing your child with a two-point belt, this may result in injuries or death of the child. Make sure that the horizontal marking on the safety sticker p is Pull the three-point belt over the child seat. Insert the belt tongue into the car belt buckle q. 28

29 EN CN 29

30 Insert the lap belt k into the blue belt guides m on both sides of the car seat. Pull the diagonal belt l in driving direction to tighten the lap belt k. Pull the diagonal belt l behind the top end of the baby seat. NOTE! Do not twist the car belt. Bring the diagonal belt l into the blue belt slot n on the back. Tighten the diagonal belt l. 30

31 EN CN 31

32 The seat belt must run through the blue belt routing and below the unfolded Linear Side-impact Protection. WARNING! In some cases the buckle q of the car safety belt may be too long and reach into the belt slots of the CYBEX Aton 5, making securely. If this is the case please choose another position in the car. Lift up the linear-side.impact protection (LSP) device to improve side protection during a side collision. NOTE: It is not allowed to lift up the side protector (LSP) on the side turned away from the vehicle door. 32

33 EN CN 33

34 Listen for an audible CLICK, when it locks When using the Aton 5 on prohibited to fold out the (LSP) device. WARNING! Using the (LSP) device to carry or to fasten the Aton 5 is prohibited. REMOVING THE CAR SEAT By pressing the locking device f, you can fold the device (LSP) downwards into the original position. f Before removing the ATON 3S from the vehicle, fold the (LSP) devices back into place. This protects the (LSP) device and the vehicle itself from damage. 34

35 EN CN 35

36 Take the seat belt out of the blue belt slot n in the back. Open the car buckle q and take the lap belt k out of the blue belt slots m. SECURING YOUR CHILD CORRECTLY For the safety of your child please check body without restricting the baby that the headrest is adjusted to the correct height if the shoulder belts c are not twisted if the buckle tongues t are fastened in the buckle e INSTALLING THE BABY SEAT CORRECTLY For the safety of your child please make sure 36

37 EN CN 37

38 38 that the Aton 5 is positioned against driving direction (the feet of the baby point in the direction of the backrest of the car seat) if the car seat is installed in front, that the front-airbag is deactivated that Aton 5 is secured with a 3-point belt that the lap belt k is running through the belt slots m on each side of the baby seat that the diagonal belt l is running through the blue belt hook n on the back of the baby seat

39 EN CN 39

40 m that the car buckle q is not reaching all the way to the blue belt slot m that the car belt is tight and not twisted that the Aton 5 is vertically installed on the car seat (see marking) NOTE! The CYBEX Aton 5 is exclusively made for forward facing car seats, which are equipped with a 3-point belt system according to ECE R16. Lift up the linear-side.impact protection (LSP) device to improve side protection during a side collision. 40

41 EN CN 41

42 REMOVING THE INSERT The insert, which is preinstalled when purchased, helps to support lying In order to remove the insert please loosen the cover in the baby seat, lift the insert a little bit and take it out of the seat. The insert may be removed after approx. 3 months to provide more space. 42

43 EN CN 43

44 OPENING THE CANOPY Pull the canopy panel away from the seat and turn the canopy up. To fold away the canopy turn it back to its basic position. CYBEX TRAVEL-SYSTEM Please follow the instruction manual supplied with your push chair. In order to attach the CYBEX Aton 5 please place it against driving direction on the adapters of the CYBEX buggy. You will hear an audible CLICK when the baby seat is locked into the adapters. Always double check if the baby seat is securly fastened to the buggy. DEMOUNTING To unlock the baby seat keep the release buttons r pressed and then lift the shell up. 44

45 EN CN 45

46 PRODUCT CARE In order to guarantee the best possible protection for your child, please take note of the following: All important parts of the child seat should be examined for damages on a regular basis. The mechanical parts must function It is essential that the child seat does not get jammed between hard parts like the door of the car, seat rail etc. which might cause damage to the seat. The child seat must be examined by the manufacturer after e.g. having been dropped or similar situations. 46

47 NOTE! When you buy a CYBEX Aton 5 it is recommended to buy a second seat cover. This allows you to clean and dry one whilst using the other one in the seat. WHAT TO DO AFTER AN ACCIDENT In an accident the seat can sustain damages which are invisible to the eye. Therefore the seat should be replaced immediately in such cases. If in doubt please contact your retailer or the manufacturer. CLEANING It is important to use only an original CYBEX Aton 5 seat cover since the cover is an essential part of the function. You may obtain spare covers at your retailer. EN CN 47

48 are machine washable at max. 30 C on delicate cycle. If you wash it at higher temperature, the cover fabric may lose colour. Please wash the cover separately and never dry it plastic parts with a mild detergent and warm water. WARNING! Please do not use chemical detergents or bleaching system cannot be removed from the baby seat. Do not remove parts of the harness system. The integrated harness system can be cleaned with a mild detergent and warm water. 48

49 EN CN 49

50 REMOVING THE COVER The cover consists of 5 parts. 1 seat cover, 1 headrest cover, 2 shoulder pads and 1 buckle pad. To remove the cover please follow these steps: Open the buckle. Remove the shoulder pads from the shoulder belts. Pull the headrest cover over the headrest rim. Pull the shoulder belts with the buckle tongues out of the headrest cover. Remove the headrest cover. Pull the seat cover over the seat rim. Pull the buckle through the seat cover. Now you can remove the cover part. 50

51 EN CN 51

52 WARNING! The child seat must never be used without the cover. NOTE! Use CYBEX Aton 5 covers ATTACHING THE SEAT COVERS in order to put the covers back onto the seat, proceed in the reverse order as shown above. NOTE! Do not twist the shoulder straps. 52

53 EN CN 53

54 DURABILITY OF PRODUCT Since plastic materials wear out over time, e.g. from exposure to direct sunlight, the product characteristics may vary slightly. As the car seat may be exposed to high temperature differences as well as other unforseeable forces please follow the instructions below. If the car is exposed to direct sunlight for a longer period of time, the child seat must be taken out of the car or covered with a cloth. Examine all plastic parts of the seat for any damages or changes to their form or color on a yearly basis. If you should notice any changes, you must dispose of the seat. Changes to the fabric - in particular the fading of color - are normal and do not constitute a damage. 54

55 DISPOSAL For environmental reasons we kindly ask our customers to dispose of the beginning (packing) and at the end (seat parts) of the lifetime of the child seat all incidental waste properly. Waste disposal regulations may vary regionally. In order to guarantee a proper disposal of the child seat, please contact your communal waste management or administration of your place of residence. In any case, please take note of the waste disposal regulations of your country. EN CN WARNING! Keep all packing materials away from children. 55

56 PRODUCT INFORMATION If you have questions please contact following information before: serial number (see sticker). brand name and type of car and the position where the seat is mounted normally. weight (age, size) of child. For further information about our products please visit 56

57 WARRANTY The following warranty applies solely in the country where this product was initially sold by a retailer to a customer. The warranty covers all manufacturing and material defects, existing and appearing, at the date of purchase or appearing within a term of three (3) years from the date of purchase from the retailer who initially sold the product to a consumer event that a manufacturing or material defect should appear, we will at our own discretion either repair the product free of charge or replace it with a new product. To obtain such warranty it is required to take or ship the product to the retailer, who initially sold this product to a customer and to submit an original proof of purchase (sales receipt or invoice) that contains the date of purchase, the name of the retailer and the type designation of EN CN 57

58 this product. This warranty shall not apply in the event that this product is taken or shipped to the manufacturer or any other person other than the retailer who initially sold this product to a consumer. Please check the product with respect to completeness and manufacturing or material defects immediately at the date of purchase or, in the event that the product was purchased in distance selling, immediately after receipt. In case of a defect stop using the product and take or ship it immediately to the retailer who initially sold it. In a warranty case the product has to be returned in a clean and complete condition. Prior to contacting the retailer, please read this instruction manual carefully. This warranty does not cover any damages caused by misuse, environmental etc.) or normal wear and tear. 58

59 It does solely apply in the event that the use of the product was always in compliance with the operating instructions, if any and performed by authorized persons and if original components and accessories were used. This warranty does not exclude, limit or otherwise affect any statutory consumer rights, including claims in tort and claims with respect to a breach of contract, which the buyer may have against the seller or the manufacturer of the product. EN CN CYBEX IN EUROPE CYBEX GmbH, Riedingerstr. 18, Bayreuth, Germany Tel.: , Fax.:

60 CYBEX GmbH Riedingerstr Bayreuth Germany CY_171_1095_B0716

SOLUTIONQ3FIX_EN_CN.pdf

SOLUTIONQ3FIX_EN_CN.pdf CN EN SOLUTION Q3-FIX User guide ECE R-44/04 Gr. 2/3, 15-36 kg (ca. 3-12 Y) EN - WARNING! THIS SHORT MANUAL IS ONLY INTENDED AS AN OVERVIEW. YOU MUST READ THE ENTIRE MANUAL CAREFULLY IN ORDER TO ACHIEVE