YUHONG Product Manuals 1

Transcription

1 YUHONG Product Manuals 1

2 Contents 一 改性沥青防水卷材 / Modified Bituminous Water Proof Sheet Material PMB-741 弹性体 (SBS) 改性沥青防水卷材...02 PMB-741 Elastomer(SBS)Modified Bituminous Water Proof Sheet Material PMB-742 超低温弹性体 (SBS) 改性沥青防水卷材...04 PMB-742 Ultralow Temperature Elastomer (SBS) Modified Bituminous Water Proof Sheet Material PMB-751 塑性体 (APP) 改性沥青防水卷材...06 PMB-751 Plastomer (APP)Modified Bituminous Water Proof Sheet Material 道桥用 (RDB) 改性沥青防水卷材...08 Road and Bridge (RDB) Modified Bituminous Water Proof Sheet Material ARC 聚合物改性沥青耐根穿刺防水卷材...10 ARC Polymer Modified Bituminous Root Puncture Resistant Water Proof Sheet Material 铁路桥涵专用 RWB-801 高聚物改性沥青防水卷材...11 Railway Bridge Culvert RWB-801 High Polymer Modified Bituminous Water Proof Sheet Material 2 3

3 二 SAM 自粘防水卷材 / SAM Self-Adhesive Water Proof Sheet Material SAM-920 无胎自粘聚合物改性沥青防水卷材...14 SAM-920 Non-Filler Base Self-Adhesive Polymer Modified Bituminous Water Proof Sheet Material SAM-921 湿铺法交叉层压自粘防水卷材...15 SAM-921 Wet Laid Cross-Laminated Self-Adhesive Water Proof Sheet Material SAM-930 自粘聚合物改性沥青聚酯胎防水卷材...17 SAM-930 Self-Adhesive Polymer Modified Bituminous Polyester Filler Base Water Proof Sheet Material SAM-950 双面自粘聚合物改性沥青防水卷材...18 SAM-950 Double-Side Self-AdhesivePolymer Modified Bituminous Water Proof Sheet Material 三 合成高分子卷材 / Synthetic Macromolecule Sheet Material PMT 热塑性聚烯烃 (TPO) 防水卷材...21 PMT Thermoplastic Polyolefin (TPO) Water Proof Sheet Material SPUA-355 刮涂聚脲弹性...33 SPUA-355 Blade Coating Polyurea Elastic Paint HCA-101 高弹厚质丙烯酸酯...34 HCA-101 High Elastic Thick Acrylate HCA-108 屋面丙烯酸高弹...35 HCA-108 Roof Crylic Acid High Elastic JSA-101 聚合物水泥...36 JSA-101 Polymer Cement BCS-231 溶剂型橡胶沥青...37 BCS-231 Solvent Type Rubber Bituminous BCW-221 水性橡胶沥青...38 BCW-221 Water-Based Rubber Bituminous PMH-3040 高密度聚乙烯自粘胶膜防水卷材...23 PMH-3040 High Density Polyethylene Self-Adhesive Film Water Proof Sheet Material BBC-251 路桥用聚合物改性沥青...39 BBC-251 Road and Bridge Oriented Polymer Modified Bituminous PME-EVA 塑料防水板...25 PME-EVA Plastic Water Proof Board REB-281 道路用乳化沥青...40 REB-281 Road Oriented Emulsified Bitumen 四 / Waterproof Paint SPU 单组分聚氨酯...27 SPU Single-Component Polyurethane SPU-303 饮用水工程专用聚氨酯...28 SPU-303 Drinking Water Engineering Oriented Polyurethane SPU-311 双组分聚氨酯...29 SPU-311 Bi-Component Polyurethane PBC-228 喷涂速凝高弹橡胶沥青...41 PBC-228 Spraying Rapid Hardening High Elastic Rubber Bituminous PBC-328 非固化橡胶沥青...42 PBC-328 Non-Curing Rubber Bituminous 五 刚性防水材料 Rigid Waterproof Material PCC-501 水泥基渗透结晶型...44 PCC-501 Cement-Based Capilary Crystalline Waterproof Paint SPU-361 高强聚氨酯...30 SPU-361 High Strength Polyurethane PMC-421 聚合物改性水泥基防水灰浆...45 PMC-421 Polymer Modified Cement-Based Waterproof Mortar SPUA-351 喷涂聚脲弹性涂料...31 SPUA-351 Spraying Polyurea Elastic Paint PMC-426 双组分聚合物水泥防水砂浆...46 PMC-426 Bi-Component Polymer Cement Waterproof Mortar 4 5

4 FDB-401 防水堵漏宝...47 FDB-401 Waterproof Leaking Stoppage Material 六 系统配套材料 System Supporting Material BPS-201 基层处理剂...49 BPS-201 Base Treating Agent BPS-202 水性沥青基层处理剂...49 BPS-202 Water-Based Bituminous Base Treating Agent BSR-242 沥青基防水卷材密封膏...50 BSR-242 Bitumen-Based Sealant BAC-211 橡胶沥青冷胶粘剂...50 BAC-211 Rubber Bituminous Cold Glue 七 密封材料 Sealing Material 改性沥青防水卷材 Modified Bituminous SPU-321 聚氨酯建筑密封膏...52 SPU-321 Polyurethane Construction Sealant SPU-322 聚氨酯道桥密封膏...54 SPU-322 Polyurethane Road and Bridge Sealant 6 1

5 改性沥青防水卷材 Modified Bituminous 改性沥青防水卷材 Modified Bituminous PMB-741 弹性体 (SBS) 改性沥青防水卷材 PMB-741 Elastomer (SBS) Modified Bituminous 雨虹 牌弹性体 (SBS) 改性沥青防水卷材是以苯乙烯 - 丁二烯 - 苯乙烯 (SBS) 热塑性弹性体改性沥青做浸渍和涂盖材料, 以聚酯毡 玻纤毡 玻纤增强聚酯毡为胎基, 上表面覆以聚乙烯膜 细砂 矿物片 ( 粒 ) 料等做隔离材料所制成的可以卷曲的片状防水材料 YUHONG Brand Elastomer (SBS) Modified Bituminous is a thermoplastic and elastic modified bituminous dipping and coatingmaterial made out of Stylene-Butadiene-Stylene (SBS),the filler base is polyester felt, glass fiber felt and glass fiber reinforced polyester felt, it is a kind of rollable sheet water proof materials with the surface cover of the isolating materials like polyethylene film, fine sand and mineral slice (or particle) etc. 长丝聚酯胎卷材 : 长丝聚酯胎体和 SBS 改性沥青两种高性能材料的组合, 为综合性能优异的高性能档次防水卷材 ; 可形成高强度防水层, 抵抗压力水能力强 ; 耐硌破 耐撕裂 耐疲劳, 耐腐蚀 耐霉菌 耐候性好 ; 抗拉强度高, 延伸率大, 对基层收缩 变形 开裂的适应能力强 ; 优良的耐高低温性能 : 在 -20 下仍保持功能, 冷热地区均适用, 尤其适用于寒冷地区 ; 施工性能好 : 热熔法粘结, 一年四季均可施工, 且热接缝, 可靠耐久 Filament polyester filler base sheet material: The combination of filament polyester filler base and SBS modified bitumen, forms a high performance and high class comprehensive water proof sheet material. Forming a high strength water proof layer, to have strong resistance agaist water pressure. Good performance of breaking resistance, tearing resistance, fatigue resistance, corrosion resistance, mould resistance and weather resistance; High tensile strength, high elongation, high adaptive capacity to base shrinkage,deformation and fracture. Good resistance performance of low and high temperature: It still works under -50, adaptive to cold and hot surroundings, especially in chilly region. Good workability: Hot melt cementation, we are able to contruct in the four seasons of the whole year, hot-joint is able to be reliable and durable. GB 弹性体改性沥青防水卷材 国家标准 品种 规格 按胎基分为 : 聚酯胎 (PY) 玻纤胎 (G) 玻纤增强聚酯胎 (PYG) 按上表面隔离材料分为 : 聚乙烯膜 (PE) 细砂 (S) 矿物 粒料 (M) 按下表面隔离材料分为 : 细砂 (S)( 注 : 细砂粒径不超过 0.6mm 的矿物颗粒 ) 聚乙烯膜 (PE) 按物理力学性能分为 :Ⅰ 型和 II 型 Classified by filler base: Polyester filler (PY), glass fiber filler(g) and glass fiber reinforced polyester filler (PYG). Classified by upper surface isolating material: Polyethylene film (PE), fine sand (S) and mineral particle (M). Classified by lower surface isolating material: Fine sand (S) (note: the mineral particle with the fine sand diameter not more than 0.6mm) and polyethylene film (PE). The physical and mechanical properties were divided in Type Ⅰ and Type Ⅱ. 弹性体改性沥青防水卷材规格表 Specification Table of Elastomer Modified Bituminous 公称厚度 /mm Norminal Thickness 胎基类型 Filler base type 上表面材料 Upper surface material 下表面材料 Lower surface material 面积 /( m2 / 卷 ) Area/( m2 /roll) Nation Standard GB Elastomer Modified Bituminous. Type and Specification PY,G PY,G PY,PYG PE S M PE S M PE S M PE PE S PE PE S PE PE S 规格 : 卷材公称宽度为 1000mm Specification: Nominal width of sheet material is 1000 mm. 无碱玻纤胎卷材 : 经济型胎体和高性能 SBS 改性沥青组合 ; 较高的拉伸强度, 优异的耐高低温性能 ; 耐腐蚀 耐霉变 耐侯 ; 施工性能好 玻纤增强聚酯胎卷材 : 可采取机械固定方式施工, 安全环保 ; 产品具有更好的尺寸稳定性 Water proof for various industrial and civil engineerings. Underground water proof and damp proof for industrial and civil engineering, and water proof for indoor swimming pool and fire pool etc. Water proof for municipal engineering such as subway, tunnel, concrete road surface, bridge surface, sewage works and refuse landfill etc. Water proof for water conservancy facilities like canal and water pool etc. Application range for various filler base and surface sheet material: Polyester felt filler base elastic modified bituminous water proof sheet material is appropriate to the roof and underground water proof engineerings of industrial and civil engineering projects. Water proof type Ⅱ is appropriate to roof type Ⅰ and Ⅱ and underground water proof projects. Glass fiber reinforced polyester filler base sheet material is appropriate to mechanically-mounted single layer water proof, but must pass the wind load test. Glass fiber felt filler base sheet material is appropriate to the roof of structurally stable building and suitable for underground water proof project. Exposed surface is suitable to have water proof sheet material with non-transparent mineral particle as upper surface isolating material. The water proof sheet material with find sand as surface isolationg material is appropriate to underground constructioin project. 2 3 各种工业与民用建筑屋面工程的防水 ; 工业与民用建筑地下工程的防水 防潮以及室内游泳池 消防水池等构筑物防水 ; 地铁 隧道 混凝土铺筑路面 桥面 污水处理场 垃圾 填埋场等市政工程防水 ; 水渠 水池等水利设施防水 不同胎基 表面卷材的 : 聚酯毡胎基弹性体改性沥青防水卷材适用于工业与民用建 筑的屋面和地下防水工程 ; Ⅱ 型防水卷材适用于防水 Ⅰ Ⅱ 级屋面和地下防水工程 ; 玻纤增强聚酯毡胎基卷材适用于机械固定单层防水, 但需 通过抗风荷载试验 ; 玻纤毡胎基卷材适用于结构稳定的一般屋面和地下防水工 程 ; 外露使用采用上表面隔离材料为不透明的矿物粒料的防水 卷材 ; 地下工程防水宜采用表面隔离材料为细砂的防水卷材 Alkali-free glass fiber filler base sheet material: Combination of economical filler base and high performance SBS modified bitumen. Higher tensile strength, excellent resistance to high and low temperature. Good performance of corrosion resistance, mould resistance, weather resistance and good workability. Glass fiber reinforced polyester filler base sheet material: We may use mechanical mounting method to construct, and it is safe and environmentally friendly. The product has better dimensional stabiliy.

6 改性沥青防水卷材 Modified Bituminous 改性沥青防水卷材 Modified Bituminous PMB-742 超低温弹性体 (SBS) 改性沥青防水卷材 PMB-742 Ultralow Temperature Elastomer (SBS) Modified Bituminous Water Proof Sheet Material 雨虹 牌超低温弹性体 (SBS) 改性沥青防水卷材是以苯乙烯 - 丁二烯 - 苯乙烯热塑性 SBS 作改性剂的沥青做浸渍和涂盖材料, 上表面覆以聚乙烯膜 细砂或矿物片 ( 粒 ) 料等隔离材料所制成的可以卷曲的片状防水材料 YUHONG Brand Ultralow Temperature Elastomer (SBS) Modified Bituminous is a thermoplastic and elastic modified bituminous dipping and coatingmaterial made out of Stylene-Butadiene-Stylene, it is a kind of rollable sheet water proof materials with the upper surface cover of the isolating materials like polyethylene film, fine sand or mineral slice (or particle) etc. Q/SY YHF 0042 超低温 SBS 改性沥青防水卷材 企业标准 品种 规格 按物理力学性能分为 Ⅰ 型和 II 型 按表面覆面材料分为聚乙烯膜 (PE) 细砂 (S) 矿物粒料 (M) 三种, 详细规格见下表 Enterprise Standard Q/SY YHF 0042 Ultralow Temperature SBS Modified Bituminous Water Proof Sheet Material. Type and Specification The physical and mechanical properties were divided in Type Ⅰ and Type Ⅱ. Classified by upper surface isolating material: Polyethylene film (PE), fine sand (S) and mineral particle (M). See below table for detailed specifications. 具有优异的超低温性能,-40 低温下仍保持良好的柔韧性, 可用于气温较为寒冷地区 ; 长丝聚酯胎体和 SBS 改性沥青两种高性能的组合, 可形成高强度防水层, 抵抗压力水能力强 ; 抗拉强度高, 延伸率大, 对基层收缩变形和开裂的适应能力强 ; 良好的耐高温性能, 可满足不同季节的需求 ; 高强度聚酯胎厚度大, 耐穿刺 耐硌破 耐撕裂 耐疲劳 ; 耐腐蚀 耐霉菌 耐侯性好 ; 施工性能好, 热熔法粘结一年四季均可施工, 且热接缝可靠耐久 可广泛用于各种领域和类型, 防水等级为 Ⅰ Ⅱ 级的防水工程, 最适用于以下工程类型 : 严寒地区各种工业与民用建筑屋面工程和地下工程的防水 ; 工业与民用建筑的室内游泳池 消防水池等的构筑物防水 ; 地铁 隧道 混凝土铺筑路面和桥面 污水处理场 垃圾掩埋场等市政工程防水 ; 水渠 水池等水利设施防水 Excellent ultralow temperature resistance performance, good flexibility even under -40, adapted to chilly region. The combination of filament polyester filler base and SBS modified bitumen, forming a high strength water proof layer, to have strong resistance agaist water pressure. High tensile strength, high elongation, it is adaptive to shrinkage, deformation and fracture of base. Good resistance of high temperature,is able to meet the need of various seasaons. High strength polyester filler base material has large thickness, resistance of puncture, breaking, tearing and resistance of fatigue. Good performance of resistance to corrosion, mould and weather. Good workability, we may construct by hot melt cementation method during four seasons in the whole year, hot-joint is durable and reliable. Applied in Grade Ⅰ and Grade Ⅱ water proof engineering in various industrial and civil sections, be mostly appropriate to the following engineering: Various industrial and civil construction roof and underground water proof in chilly region. Indoor swimming pool and fire pool water proof of industrial and civil construction. Water proof for municipal engineering such as subway, tunnel, concrete road surface, bridge surface, sewage works and refuse landfill etc. Water proof for water conservancy facilities like canal and water pool etc. 卷重 面积及厚度 Roll weight, area and thickness 规格 ( 公称厚度 )/mm Specification (nominal thickness) 上表面材料 Upper surface material 下表面材料 Lower surface material 面积 /( m2 / 卷 ) Area/( m2 /roll) PE S M PE S M PE S M PE PE S PE PE S PE PE S 规格 : 卷材公称宽度为 1000mm Specification: Nominal width of sheet material is 1000 mm. 4 5

7 改性沥青防水卷材 Modified Bituminous 改性沥青防水卷材 Modified Bituminous 雨虹 牌塑性体 (APP) 改性沥青防水卷材是无规聚丙烯 (APP) 或聚烯烃类聚合物 (APAO APO) 等改性剂的沥青做浸渍和涂盖材料, 上表面覆以聚乙烯膜 细砂 矿物片 ( 粒 ) 料等隔离材料所制成的可以卷曲的片状防水材料 YUHONG Brand Plastomer (APP) modified Bitumious Water Proof Sheet Material is a modified bituminous dipping and coatingmaterial made out of atactic polypropylene (APP) and polyolefins(apao,apo) it is a kind of rollable sheet water proof materials with the upper surface cover of the isolating materials like polyethylene film, fine sand or mineral slice (or particle) etc. 塑性体改性沥青防水卷材规格表 Specification Table of Plastomer Modified Bituminous Water Proof Sheet Material 公称厚度 /mm Norminal Thickness PMB-751 塑性体 (APP) 改性沥青防水卷材 PMB-751 Plastomer (APP) Modified Bituminous Water Proof Sheet Material GB 塑性体改性沥青防水卷材 国家标准 品种 规格 按物理力学性能分为 :Ⅰ 型和 II 型 按胎基分为 : 聚酯胎 (PY) 玻纤胎 (G) 玻纤增强聚酯毡 (PYG) 按上表面隔离材料分为 : 聚乙烯膜 (PE) 细砂 (S) 矿物粒料 (M) 按下表面隔离材料分为 : 细砂 (S)( 注 : 细砂粒径不超过 0.6mm 的矿物颗粒 ) 聚乙烯膜 (PE) National Standard GB Plastomer Modified Bituminous Water Proof Sheet Material. Type and Specification The physical and mechanical properties were divided in Type Ⅰ and Type Ⅱ. Classified by filler base: Polyester filler(py), glass fiber filler(g) and glass fiber reinforced polyester filler felt(pyg). Classified by upper surface isolating material: Polyethylene film (PE), fine sand (S) and mineral particle (M). Classified by lower surface isolating material: Fine sand (S) ( note: the mineral particle with the fine sand diameter not more than 0.6mm) and polyethylene film (PE) 长丝聚酯胎卷材 : 长丝聚酯胎与 APP 改性沥青两种高性能的组合, 性能极佳 ; 可形成高强度防水层, 抵抗压力水能力强 ; 抗拉强度高, 延伸率大, 对基层收缩 变形 开裂的适应能力强 ; 优良的耐低温性能, 耐腐蚀 耐霉菌 耐候性好 ; 高强度聚酯胎厚度大, 耐穿刺 耐硌破 耐撕裂 耐疲劳 ; 施工性能好, 热熔法一年四季均可施工, 且热接缝可靠耐久 无碱玻纤胎卷材 : 经济性胎体和高性能 APP 改性沥青组合 ; 拉伸强度高, 厚度大, 耐损伤能力强, 尺寸稳定性好 ; 优异的耐高温性能, 耐腐蚀 耐霉菌 耐候性好 ; 施工性能好, 热熔法一年四季均可施工, 且热接缝可靠耐久 玻纤增强聚酯毡卷材 : 采取机械固定方式施工, 安全环保, 而且产品具有更好的尺寸稳定性和防火性能 可广泛用于各种领域和类型的工程防水, 最适用于以下工程类型 : 工业与民用建筑的屋面工程的防水, 包括非上人屋面 上人屋面 保温屋面 非保温屋面 种植屋面 屋顶停车场 倒置屋面等常规及特殊屋面工程 ; 工业与民用建筑的地下工程的防水 防潮以及室内游泳池 消防水池等的防水 ; 地铁 隧道 混凝土铺筑路面和桥面 污水处理场 垃圾填埋场等市政工程防水 ; 水渠 水池等水利设施的防水 Filament polyester filler base sheet material: Combination of high performance filament polyester filler and APP modified bitumen, forming an exellent performance. Form high strength water proof layer, to have strong water resistance capability. It is of high tensile strength, high elongation, and adaptive to shrinkage, deformation and fracture of base. Good performance of low temperature resistance, corrosion resistance, mould resistance and weather resistance. Large thickness of the high strength polyester filler, resistance of puncture, breaking, tearing and fatigue. Good workability, we may construct by hot melt method during the four seasons in the whole year, hot-joint is reliable and durable. Alkali free glass fiber filler sheet material: Combination of economical filler base and high performance APP modified bitumen; to from a high tensile strength,large thickness, strong resistance of wearing and good dimensional stability. Excellentl high temperature resistance, corrosion resistance, mould resistance and weather resistance. Good workability, we may construct by hot melt method during the four seasons in the whole year, hot-joint is reliable and durable. Glass fiber reinforced polyester sheet material: We adopt mechanical mounting construction method, safe and environmentally friendly, and the product has better dimensional stability and fire-resistance performance. Used in different water proof engineering of all industrial and civil sections, be mostly appropriate to the following engineerings: Water proof for roof engineering of industrial and civil construction, including normal and special roof like non-human walking roof, human walking roof, thermal insulation roof, nonthermal-insulation roof, planted roof, roof parking lot, upside-down roof etc. Underground water proof and damp proof for industrial and civil construction, indoor swimming pool and fire pool water proof etc. Municipal construction waterproofing like subway, tunnel, concrete road surface and bridge surface, sewage works and refuse landfill etc. Water conservancy facilities waterproofing engineering for canal and water pool etc. 胎基类型 Filler base type 上表面材料 Upper surface material PY,G PY,G PY,PYG PE S M PE S M PE S M 不同胎基 表面卷材的 : 玻纤胎卷材 : 适用于结构稳定的一般屋面和地下工程 长纤聚酯胎卷材 : 适用于防水等级为 Ⅰ Ⅱ 级的屋面工程和地下工程 Application range for different filler base and surface sheet material: Glass fiber filler base sheet material: Appropriate to normal roof of structurally stable building and to underground engineering. Filament polyester filler sheet material: Appropriate to Grade Ⅰ and Grade Ⅱ roofing project water proof and underground project. 下表面材料 Lower surface material PE PE S PE PE S PE PE S 面积 /( m2 / 卷 ) Area/( m2 /roll) 规格 : 卷材公称宽度为 1000mm Specification: The nominal width of the sheet material is 1000mm. 6 7

8 改性沥青防水卷材 Modified Bituminous 改性沥青防水卷材 Modified Bituminous 道桥用 (RDB) 改性沥青防水卷材 Road and Bridge (RDB) Modified Bituminous Water Proof Sheet Material 雨虹 牌 RDB 道桥用改性沥青防水卷材系列产品, 是专门为市政交通建设的道路和桥梁工程防水而设计的, 是以长纤聚酯毡为胎基 以无规聚丙烯 (APP) 聚烯烃类化合物 (APAO APO) 或苯乙烯 丁二烯 苯乙烯 (SBS) 作主改性剂的改性沥青为涂盖材料, 两面覆以细砂作隔离材料所制成的耐高温 抗剪切性能优异的改性沥青防水卷材 YUHONG Brand RDB road and bridge modified bituminous water proof sheet material series is specially designed for road and bridge engineering water proof of municipal transport construction, it is of filament polyester felt filler base, and is a modified bituminous high temperature-resistance and high anti-shearing coating material made out of atactic polypropylene (APP) and polyolefins(apao,apo) or Stylene-Butadiene-Stylene(SBS), with both side covered with fine sand as insulation material. 雨虹 RDB 811 道桥用 SBS 改沥青防水卷材 : 产品性能 满足 JC/T 道桥用改性沥青防水卷材 标准 ; 雨虹 RDB 812 道桥用 APP 改性沥青防水卷材, 产品性 能满足 JC/T 建材和 JT/T 交通部两 个行业标准 品种 规格 品种 : 按物理力学性能分为 Ⅰ 型和 Ⅱ 型 规格 : Yuhong RDB-811 Road and Bridge SBS Modified Bituminous Water Proof Sheet Material: Product performance meets the requirement of the standard JC/T Road and Bridge Modified Bitumimous Water Proof Sheet Material. Yuhong RDB-812 Road and Bridge APP modified Bituminous Water Proof Sheet Material, the product performance meets the both enterprise standard requirements of JC/T Building Material and JT/T Transport Ministry. Type and Specification The physical and mechanical properties were divided in Type Ⅰ and Type Ⅱ. Specification: APP 改性 SBS 改性沥青防水卷材, 均具有抗拉强度高 延伸率大 耐冻盐和化学介质腐蚀 耐老化 对基层的伸缩 变形 开裂适应性强等特点 ; 可形成强韧的不透水层, 防水可靠 ; 独特的配方和高质量长纤聚酯毡相结合, 性能极佳且厚度大, 完全能抵抗热集料的摊铺和碾压 ; 对沥青混凝土裂缝有拉伸依从性 ; 持久的粘结性能和高温抗剪切性能优异, 能有效传递和承受交通荷载 ; 完善的系统配套材料及应用技术, 确保工程质量 JC/T 标准中 SBS APP Ⅰ 型改性沥青防水卷材, 主要用于摊铺式沥青混凝土铺装防水 ;APP Ⅱ 型改性沥青防水卷材, 主要用于浇注式沥青混凝土混合料铺装的防水 JT/T 标准中 APP Ⅰ 型主要用于摊铺式沥青混凝土的桥面,Ⅱ 型主要用于沥青玛蹄脂 (SMA) 混凝土路面防水 SBS 改性 APP 改性 Ⅰ 型, 也可用于水泥混凝土桥面 机场跑道 停车场等工程防水 APP modified and SBS modified bituminous water proof sheet materials both have strong tensile strength, large elongation, freezing resistance, resistance of salt and other chemical mediators and resistance of aging and they are adaptive to flexibility, deformation and fracture of the base. Forms a coriaceous water resistant layer, reliable water proof performance. Unique formula and high quality filament polyester combination, makes the large thickness and exellent performance, is able to have resistance for paving and grinding of the hot aggregates. It has stretching obedience for bituminous concrete cracks. Durable adhesive performance and excellent anti-shearing performance at high temperature, is able to transmit and bear the traffic loads effectively. The complete system-supporting materials and application technology ensures the engineering quality. SBS and APP Type Ⅰ modified bituminous water proof sheet material in standard of JC/T is mainly used in water proof of bituminous concrete pavement by paving method; APP Type Ⅱ modified bituminous water proof sheet material is mainly used in water proof of bituminous concrete pavement by pouring method. APP Ⅰ in standard JT/T is mainly used in bituminous concrete bridge surface by paving method, and Type Ⅱ is mainly used in asphalt mastic (SMA) concrete road surface water proof. SBS modified and APP modified Ⅰ are also used in waterproofing engineerings of concrete bridge surface, airport runway and parking lot etc. 卷材种类及品种规格表 Sheet Material Type and Specification Table 项目 / Item APP 行标 / Enterprise Standard Ⅰ Ⅱ SBS 行标 / Enterprise Standard 表面材料 / Surface Material 表面材料 / Surface Material 细砂 (S) / Fine Sand(S) 细砂 (S), 聚乙烯膜 (PE) / Fine Sand (S), Polyethylene film (PE) 宽度 / Width(m) 1.0 规格 / Specification 厚度 / Thickness(m) 长度 / Length (m) 备注 / Remark 机械化施工的卷材规格长度可达 38m 200m / The sheet material length can reach up to 38m, 200m by mechanized construction method. 8 9

9 改性沥青防水卷材 Modified Bituminous 改性沥青防水卷材 Modified Bituminous ARC 聚合物改性沥青耐根穿刺防水卷材 ARC polymer modified bituminous root puncture resistant water proof sheet material 雨虹 牌 ARC 改性沥青耐根穿刺防水卷材是以长纤聚酯纤维毡 特殊复合铜胎基或铜箔胎基为卷材胎基, 以进口化学阻根剂的 SBS/APP 改性沥青为涂盖材料, 两面覆以聚乙烯膜 细砂或矿物粒料为隔离材料制成的改性沥青防水卷材 YUHONG brand ARC polymer modified bituminous root puncture resistant water proof sheet material is a modified bituminous water proof sheet material,which contains the base of ligament polyester fiber felt, special composite copper filler or copper foil filler, the coating of imported chemical resistant root agent SBS/APP modified bitumen, and both sides covered with polyethylene film, fine sand or mineral particle as insulation material. Q/SY YHF 0016 聚合物改性沥青耐根穿刺防水卷材 企 业标准 ; 应用性能符合 JC/T 种植屋面用耐根 穿刺防水卷材 要求 Meeting enterprise standard of Q/SY 0016 Polymer Modified Bituminous Root Puncture Resistant Water Proof Sheet Material ; The application performance meets the requirement of JC/T Planted Roof Root Puncture Resistance Water Proof Sheet Material. 具有防水和阻止植物根穿透双重功能, 能够承受植物根须穿刺, 长久保持防水功能 ; 既防根穿刺, 又不影响植物正常生长 ; 可形成高强度防水层, 抵抗压力水能力强, 并耐穿刺 耐硌破 耐撕裂 耐疲劳 ; 抗拉强度高, 改性沥青涂盖层厚度大, 对基层收缩 变形 开裂的适应能力强 ; 优异的耐高低温性能, 冷热地区均可适用 ; 耐腐蚀 耐霉菌 耐候性好 ; 热熔法施工, 施工方便且热接缝可靠耐久 适用于种植屋面及需要绿化的地下建筑物顶板的耐植物根系穿刺层, 确保植物根系不对该层次以下部位的构造形成破坏, 并具有防水功能 It has double functions of water proof and plant root puncture resistance, it can be resistant to plant root and resistant to water permanently. It doesn t affect plant growing while being resistant to plant root punctures. It can form a high strength water proof layer, strong resistance to water, resistance to puncture, breaking, tearing and fatigue. High tensile strength, large thickness of modifie bituminous coating, and it is very adaptive to the shrinkage, deformation and fracture of base. Exellent low and high temperature resistance, it can be adaptive in both hot and cold region. Corrosion resistant, mould resistant and weather resistant. Hot melt construction method, convenient, reliable and durable by hot melt method. Applied for the root puncture resistant layers of planted roof and underground landscaping demanded building roof, in order to protect from the damage of the root to the beneath layer, and it also has water proof function. 产品型号 Product Model 产品型号 Product Model 产品名称 Product Name 胎基 Filler Base 阻根材质 Root resistant material 厚度规格 Thickness specification ARC 701 SBS 改性沥青化学耐根穿刺防水卷材 SBS modified bituminous root puncture resistant water proof sheet material 长纤聚酯胎 Ligament polyester filler base 化学阻根剂 Chemical resistant root agent 4mm ARC 711 ARC 721 SBS 改性沥青复合铜胎基耐根穿刺防水卷材 SBS modified bituminous composite copper filler base root puncture resistant water proof sheet material SBS 改性沥青铜箔胎基耐根穿刺防水卷材 SBS modified bituminous copper foil filler base root puncture resistanct water proof sheet material 复合铜胎基 Composite copper filler base 铜箔胎基 Copper foil filler base 复合铜胎基化学阻根剂 Composite copper filler base chemical resistant root agent 铜箔胎基化学阻根剂 Copper foil filler base Chemical resistant root agent 4mm 4mm 铁路桥涵专用 RWB-801 高聚物改性沥青防水卷材 Railway bridge culvert oriented RWB-801 high polymer modified bituminous water proof sheet material 雨虹 牌 RWB 801 铁路桥涵专用高聚物改性沥青防水卷材, 是专门为铁路混凝土桥涵防水层研究设计的 它是以特殊加工的长纤聚酯无纺布为胎基, 特殊配方制成的高聚物改性沥青做浸渍和涂盖材料, 两面辅以细砂隔离材料所制成的一种超高性能改性沥青防水卷材 YUHONG brand railway bridge culvert oriented RWB-801 high polymer modified bituminous water proof sheet material is a high performance modified bituminous water proof sheet material which is designed for railway concrete bridge culvert water proof layer.it contains the base of specially-processed ligament polyester non-woven fabrics, and the dipping and coating materials of specially formulated high polymer modified bitumen, and both sides covered with fine sand as insulation material

10 改性沥青防水卷材 Modified Bituminous TB/T 铁路混凝土桥面防水层技术条件 行业 标准 Meet requirement of enterprise standard of TB/T Railway Concrete Bridge Surface Waterproofing Layer Technical Condition. 品种 规格 Type and Specification 厚度 / Thickness(mm) 幅宽 / Width(mm) 长度 / Length(mm) < 33 优异的耐水性 : 不吸水, 在长期浸蚀下性能不衰减, 在 0.4MPa 压力水作用下不被穿透 ; 拉伸强度高, 延伸率大 : 抗基层收缩 变形 开裂能力强 ; 在混凝土桥面板受应力作用出现裂缝时, 具有依从性 ; 优异的耐高低温性能 : 标准产品在 -35 下弯曲不断裂, 120 高温不变形, 在通常的 使用区间下, 在 -60 下仍保持韧性和防水功能 ; 超高的力学性能和较大的厚度, 赋予卷材优异的耐疲劳性和耐施工损伤性, 在负荷以下, 以 50HZ 频率反复作用 2000 万次, 卷材无裂缝 ; 优异的尺寸稳定性 :80 下加热 168h, 尺寸变化在 ±0.5 范围内 ; 耐老化 耐冻盐 耐酸碱等化学作用, 耐霉菌 耐久寿命长 ; 优异的粘结性能 : 热熔法施工, 与基层粘结牢固且耐久, 在 200 万次反复压力和拉力作用下, 粘结层无开裂, 能有效抵抗行车的负载 桥用卷材 : 适用于铁路混凝土有砟桥道砟内和无砟桥的桥面防水 桥梁的桥面防水 ; 涵用卷材 : 适用于涵洞 隧洞以及公路混凝土桥的桥面防水 ; 超低温桥用卷材 : 适用于对耐低温性能有超高要求的桥面防水 Excellent water resistance: It does not absorb water, even in a long period of time, and the water does not penetrate even under 0.4 Mpa water pressure. High tensile strength, large elongation: Strong resistant to shrinkage,deformation and fracture of base; it has obedience when concrete bridge top plate cracks under stress. Excellent low and high temperature resistant performance: This product can be bent under -35 without fracture, and does not deform at 120,it is usually used at , and even at -60 it still can keep its resilience and waterproofing performance. Super mechanical performance and large thickness, these make the sheet material more durable of fatigue and workability, if we repeatedly fold it for 20 million times at the frequency of 50HZ under load, it will have no fracture. Perfect dimension stability: Heat up for 168 hours at 80, the dimension change range is within ±0.5. Aging resistant,freezing salt resistant, acid and alkali reaction resistant,mould resistant, and it has long life durability. Excellent adhesive performance: Hot melt construction method, adhesive with base firmly, there will be no fracture on the adhesive layer even under repeatedly 2 million times of pressing and hauling,it can be resistant to traffic loads. Sheet material used for bridge: Used for bridge surface water proof engineering of the spare-rock base or nonspare-rock base bridge concrete railway, and also for bridge surface water proof engineerings. Culvert oriented sheet material: Applied to culvert, tunnel and highway concrete bridge surface water proof. Ultra low temperature bridge oriented sheet material: Applied to bridge surface water proof which requires super strict low temperature resistance. SAM 自粘防水卷材 SAM Self-Adhesive 12 13

11 SAM 自粘防水卷材 SAM Self-Adhesive SAM 自粘防水卷材 SAM Self-Adhesive 厚度 Thickness 上表面材料 Upper surface material SAM-920 无胎自粘聚合物改性沥青防水卷材 Sam-920 Non-Filler Base Self-Adhesive Polymer Modified Bituminous Water Proof Sheet Material 雨虹 牌 SAM 920 无胎自粘聚合物改性沥青防水卷材是以 SBS 等合成橡胶 增粘剂及优质道路石油沥青等配制成的自粘橡胶沥青为基料, 以强韧的高密度聚乙烯膜 (PE) 耐高低温优异的聚酯膜 (PET) 作为上表面材料 ( 或无膜 ), 可剥离的涂硅隔离纸为下表面防粘隔离材料制成的无胎自粘防水卷材 YUHONG brand SAM-920 non-filler base self-adhesive polymer modified bituminous water proof sheet material is non-filler base self-adhesive water proof sheet material which consists of the base of self-adhesive rubber asphalt from SBS synthetic rubber,tackifier and high quality road petroleum asphalt, and the upper surface material of high and low temperature resistant perfect polyester film (PET) or coriaceous high density polyethylene film (PE) ( or non-film), and the lower surface of peelable silicon-coated insulation layer. GB 自粘聚合物改性沥青防水卷材 国家标准 分类 规格 分类 : 按上表面材料分为 : 聚乙烯膜 (PE) 聚酯膜 (PET) 无膜双面自粘 (D) 三种 规格 : 按产品性能分为 :Ⅰ 型 Ⅱ 型 ( 无膜双面自粘 (D) 除外 ) 规格 : Natinal Standard GB Self-Adhesive Polymer Modified Bituminous Water Proof Sheet Material. Classification and Specification Classified: According to upper material: Three types as polyethylene film (PE), polyester film (PET) and Non-film double side self-adhesiveness (D). Specification: According to product performance: Type Ⅰ and Type Ⅱ (except non-film double side self-adhesiveness (D)). Specification: 1.2mm 1.5mm 2.0mm 该规格卷材粘附于基层, 初粘性强,5 以上不需借助于加 热设备即可粘结牢固, 具安全性 环保性和便捷性 ; 该规格卷材具有优异的低温柔韧性和延伸性, 对基层伸缩 或开裂变形适应性强 ; 该规格卷材对钉杆穿透或外界应力作用下产生的细微裂纹 具有优异的自愈合性 ; 该规格卷材具有持久的粘结性, 与基层粘结不脱落 不窜水, 搭接缝处自身粘结与卷材同寿命 ; 该规格卷材由自粘橡胶沥青和 HDPE( 或 PET) 构成, 具优异的耐水性 ; HDPE 的产品抗穿刺 抗冲击性强, 有独特的持续抗撕裂 性强, 易于现场裁剪 明挖法地铁 隧道 水池 水库 水渠等工程防水 ; 不准动用明火的工程防水 ; 双面自粘卷材仅适用于辅助防水, 也可用于两种不相容材 料防水层交接处的粘结和密封 Product Feature This product has very strong adhesive strength to base, as long as the temperature is above 5, no need to have heating system, it is safe,convenient and has environmentally friendliness. This product has exellent low temperature flexibility and elongation, and is very adaptive to flexibleness, deformation and fracture of base. This sheet material has excellent self-healing ability for blind crack caused by nail puncture or outside stress. This sheet material has durable cohesiveness, stuck to base, does not peel off, no water inter-running phenomenon, the joint self-healing part has the same life span as sheet material. This sheet material consists of self-adhesive rubber bitumen and HDPE (or PET), it has excellent water resisting property. HDPE product has strong puncture and impact resistance, it also has unique tearing resistance, and it is easy to cut on site. Water proof engineering of open-cut subway, tunnel, water pool, reservoir, water canal etc. The water proof engineering which does not allow open fire. Double side self-adhesive sheet material is appropriate to auxiliary water proof engineering, it can also used for the joint cohesiveness and seal of two non-compatible water proof material layers. SAM-921 湿铺法交叉层压自粘防水卷材 SAM-921 Wet laid cross-laminated self-adhesive water proof sheet material 聚乙烯膜 (PE) Polyethylene film 聚酯膜 (PET) Polyester film 双面自粘 (D) Double side self-adhesiveness 宽度 / Width 1000mm 宽度 / Width 1000mm 宽度 / Width 1000mm 宽度 / Width 1000mm 宽度 / Width 1000mm 宽度 / Width 1000mm 宽度 / Width 1000mm 宽度 / Width 1000mm 宽度 / Width 1000mm 雨虹 牌 SAM-921 湿铺法交叉层压自粘防水卷材是以能与水泥砂浆发生反应的强力密封胶为粘结密封层, 粘结在进口的交叉层压强力薄膜上而复合形成的防水材料 此材料上表面为交叉叠压强力薄膜, 下表面为易于去除的隔离纸或隔离膜 该材料兼有交叉层压膜的优异性能, 又有与水泥砂浆良好的粘结性能 YUHONG Brand SAM-921 Wet laid cross-laminated self-adhesive water proof sheet material is a composite water proof material formed through cohesive combination between the strong adhesive sealing layer and the strong crosslaminated film at the entrance, the strong adhesive sealing layer should reactive to cement mortar. The upper surface of this material is strong cross-laminated film and the lower surface is an interleaving paper or isolating membrane which are easy to be removed. This material not only has the excellent performance of cross-laminated film, but also has the perfect cohesive performance with cement mortar

12 SAM 自粘防水卷材 SAM Self-Adhesive SAM 自粘防水卷材 SAM Self-Adhesive GB/T 预铺 / 湿铺防水卷材 国家标准 分类 规格 ---- 分类 : 按照产品性能分为 Ⅰ 型和 Ⅱ 型 按照粘结表面分为单面粘合 (S) 双面粘合 (D) ---- 规格 : 厚度 / Thickness(mm) 幅宽 / Width(m) 1.0 长度 (m/ 卷 ) Length (m/roll) National standard GB/T Prelaid / Wet-laid Water Proof Sheet Material. Classification and Specification ----Classification: Type Ⅰ and Type Ⅱ in accordance with product properties. Single-side adhesive (S) and Double-side adhesive (D),according to cohesive surface. ----Specification: SAM-930 自粘聚合物改性沥青聚酯胎防水卷材 SAM-930 self-adhesive polymer modified bituminous polyester filler base water proof sheet material 雨虹 牌 SAM 930 自粘聚合物改性沥青聚酯胎防水卷材是以聚酯纤维无纺布为胎基, 以掺有增粘材料的聚合物改性沥青为浸涂材料, 聚乙烯膜 细砂或隔离膜作为卷材上表面隔离层, 下表面附可剥离的涂硅隔离膜作为防粘隔离材料制成的一种增强自粘防水卷材 YUHONG brand SAM-930 self-adhesive polymer modified bituminous polyester filler base water proof sheet material is a strong self-adhesive water proof sheet material made out of the polyester fiber non-woven fabrics filler base and tackifying material, it is a polymer modified bituminous coating material, polyethylene film or fine sand or insulating film is used to be upper surface insulation layer, the lower surface is peelable silicon-coated insulation film. GB 自粘聚合物改性沥青防水卷材 国家标准 National standard GB/T Prelaid / Wet-laid Water Proof Sheet Material. * 注 : 也可根据需要生产其它厚度 Note: Optional thickness is available if production needs. 本产品采用美国维罗朗 (Valéron ) 强力交叉聚乙烯薄 膜, 因此具有如下优异性能 : 抗穿刺力强 耐顶杆撕裂强度高 耐撕裂性优异 延伸率高 尺寸稳定性好和耐低温性能优异 ; 本产品采用的强力密封胶, 精选优质沥青与各种配合料经 科学配方制成, 与各种基材具有优良的粘结性能, 与水泥砂 浆粘结时, 通过物理吸附和扩散, 与水泥砂浆形成机械锁合 作用, 确保粘结牢靠持久 ; 由于本品密封胶具有较强蠕变性, 对基层的变形适应能力 强, 能够满足多种环境条件下的施工, 可起到良好的 自愈 性能, 能够弥补混凝土的只有刚性防水的不足, 达到刚柔相 济的双重防水效果 ; 本产品采用水泥砂浆与建筑基层满粘结, 抗破坏能力强, 具备优异的防水功能, 有效阻止液态水和水蒸汽进入结构中 ; 且无需底涂 热熔, 无火灾隐患, 无需对不平基层进行专门 处理, 施工简捷, 安全环保 广泛用于各类建筑的非暴露层面 地下和室内工程, 以及 明挖地铁 隧道 水池 水渠等工程防水, 尤其适用于不准 动用明火的工程 American Valéron (Valéron ) strong cross Polyethylene film is applied in this product, therefore it has the following excellent performances: Strong puncture resistance, high push-rod tearing resistance, high ripping resistance, high elongation, and excellent dimension stability and low temperature resistant performance. We select strong sealant and high quality bitumen and we adopt scientific formula for all the ingredients, each base material has perfect cohesive performance, when combined with cement mortar, it forms a mechanical interlocked force through physical absorption and diffusion, in order to have a durable cohesiveness. Since the sealant in the product has stronger creep property, it is very adaptive to base deformation, it is able to meet the construction requirements under many surroundings condtions, it has a perfect Self- Healing performance, this can make up for the only-rigid water proof performance of concrete, to form flexible and rigid double water proof effect. Cement mortar fully combined with structure base layer, therefore this product has strong damage resistance and excellent water proof performance, it prevents liquid water and water vapor from going into structure; And there is no need to apply primer and hot melting, no fire risk, and we don t require to treat the uneven layer, the construction is convenient, safe and environmentally friendly. Applied to waterproofing engineering of all non-exposed layer of various buildings, of underground and indoor engineering, of open-cut subway, tunnel, water pool and canal etc, especially to those which open fire is not allowed. 表面材料 / Surface material 厚度 / Thickness(mm) 宽度 / Width(mm) 面积 / Area(m 2 ) 聚乙烯膜面 细砂面 Polyethylene film, fine sand surface 双面自粘 Double side self-adhesiveness 分类 规格 按物理力学性能分为 :Ⅰ 型 Ⅱ 型 按上表材料分为 : 聚乙烯膜 (PE) 细砂 (S) 无膜双 面自粘 (D) 规格 : 3 4 本产品加入特殊的增粘树脂, 使得产品具有优异的粘结性 能, 在施工环境温度内不动用明火, 无需使用粘接剂, 则可 与基层粘结良好, 对环境无污染, 属于环保型产品 ; 本产品以长纤聚酯毡为增强体, 赋予产品具有优异的抗拉 强度 抗疲劳性 抗穿刺 耐腐蚀 ; 并具较大延伸率, 对基 层伸缩或开裂变形的适应性强 ; 本产品由自粘聚合物改性沥青涂层和胎基构成, 可形成高 强度防水层, 对压力水抵抗能力强 ; 本产品对钉杆穿透或外界应力作用下产生的细微裂纹具有 优异的自愈合性 ; 接缝自身粘接与卷材同寿命 Classification and Specification Can be classified by physical and mechanical properties: Type Ⅰ and Type Ⅱ. Can be classified by upper surface material: Polyethylene film (PE), fine sand (S) and non-film double side selfadhesiveness (D). Specification: We add a very special tackifying resin to make the product to have a perfect adhesive performance, there is no need to use open fire during construction, no need to use adhesives either,there will be an excellent cementation with base, and it is no contamination to surroundings, is an environmentally friendly product. This product is reinforced by ligament polyester felt, therefore it has a perfect tensile strength, resistance of fatigue, resistance of puncture and corrosion, and it has a large elongation, and strongly adaptive to shrinkage, deformation or fracture of base. This product is made out of self-adhesive polymer modified bituminous coating and filler base, it can form a high strength water resistance layer, is able to be resistant to high water pressure. This product has self-healing ability to blind cracks caused by nail puncture or outside stress; the adhesiveness life span is as long as the sheet material s. 10

13 SAM 自粘防水卷材 SAM Self-Adhesive SAM 自粘防水卷材 SAM Self-Adhesive 用于非外暴露屋面和地下工程防水层 ; 明挖法地铁 隧道 水池 水库 水渠等工程防水 ; 不准动用明火的工程防水 ; 低温柔韧性更好, 适用于寒冷地区 Applied to waterproofing engineering of non-exposed roof and underground construction. Applied to waterproofing engineerings of open-cut subway, tunnel, water pool, reservoir and canal etc. The water proof engineering which open fire is not allowed to used. Excellent low temperature flexibility is appropriate to chilly region. SAM-950 双面自粘聚合物改性沥青防水卷材 SAM-950 double-side self-adhesive polymer modified bituminous water proof sheet material 序号 / Series No 厚度 / Thickness(mm) 幅宽 / Width(mm) 面积 / Area(m 2 ) 不动用明火, 对环境无污染, 属于环保型产品 ; 聚酯胎抗拉强度高, 延伸率较大, 对基层伸缩 开裂 变 形适应性强 ; 无碱玻纤胎卷材经济型胎体 拉伸强度高, 厚度大, 耐损 伤能力强, 尺寸稳定性好 ; 以 SBS APP 改性沥青做涂覆材料, 耐高低温性能好 ; 冷热地区均适用 ; 粘结性好 : 卷材接缝自身粘接与卷材寿命同步 No need to use open fire, no pollution to surroundings,is one environmentally friendly product. The polyester has strong tensile strength, large elongation, and be adaptive to shrinkage, fracture and deformation of the base. Alkali free glass fiber filler base economical type has the strong tensile strength, large thickness, strong resistance of wearing, and dimension stability. The coating material made out of SBS and APP modified bitumen has excellent low temperature resistance; and is able to be applied in hot and cold region. Excellent cohesiveness: The sheet material self-adhesive service life span is the same as the one of sheet material. 10 雨虹 牌 SAM 950 双面自粘聚合物改性沥青防水卷材是以聚酯纤维无纺布为胎基, 弹性体 (SBS) 改性沥青做浸渍和涂盖材料, 上 下表明涂自粘橡胶沥青并附可剥离的涂硅隔离纸作为隔离材料制成的一种双面自粘的防水卷材 YUHONG Brand SAM-950 double-side self-adhesive polymer modified bituminous water proof sheet material is made based on polyester fiber non-woven fabric filler base, it is an elastomer (SBS) modified bituminous dipping and coating material.it is a double side water proof sheet material with upper and lower surface covered with self-adhesive rubber bitumen and the peelable silicon-coating insulation material. GB/T 带自粘层的防水卷材 国家标准 GB/T Water Proof Sheet Material with Self- Adhesive Layer. 适用于工业与民用建筑及非外露屋面的防水 ; 地铁 隧道 混凝土铺筑路面和桥面 污水处理场 垃圾填埋场等市政工程防水 ; 水池 水渠等水利设施工程的防水 防渗 防潮 ; 适用于要求卷材与基层和上表面保护层 ( 或结构层 ) 均粘结的防水工程 Applied in industrial and civil construction and in nonexposed roofing. Water proof for municipal engineering such as subway, tunnel, concrete road surface, bridge surface, sewage works and refuse landfill etc. It is applied in water proof, seepage proof and damp proof of water pool and canal of water conservancy facilities construction. Applied in the water proof engineering with requirement of cohesiveness between sheet material and base and upper protecting layer ( or structural layer). 分类 规格 按物理力学性能分为 :Ⅰ 型 Ⅱ 型 按主体材料分为 : 带自粘层 SBS 改性沥青沥青防水卷材和带自粘层 APP 改性沥青防水卷材 按照胎基不同分为 : 聚酯胎 (PY) 和玻纤胎 (G) 规格 : Classification and Specification The physical and mechanical properties were divided in Type Ⅰ and Type Ⅱ. Can be classified by main material: Modified bituminous water proof sheet material with self-adhesive layer SBS and modified bituminous water proof sheet material with selfadhesive layer APP. Can be classified by filler base: Polyester filler base (PY) and glass fiber filler base (G). Specification: 18 19

14 合成高分子卷材 Synthetic Macromolecule Sheet Material PMT 热塑性聚烯烃 (TPO) 防水卷材 PMT thermoplastic polyolefin (TPO) water proof sheet material 雨虹 牌 TPO 防水卷材采用先进聚合技术将乙丙 (PE) 橡胶与聚丙烯结合在一起的热塑性聚烯烃 (TPO) 材料为基料, 并采用先进加工工艺制成的可卷曲的防水材料 YUHONG brand TPO waterproofing sheet material is made out of the binder of thermoplastic polyolefin (TPO) which combined by EPR and polypropylene by advanced polymerization technology, the whole process of the waterproofing sheet material manufacturing is by advanced technology. 合成高分子卷材 Synthetic Macromolecule Sheet Material GB 热塑聚烯烃(TPO) 防水卷材 国家标准 品种 规格 ---- 品种 : PMT-3010 均质型热塑聚烯烃 (TPO) 防水卷材 PMT-3020 纤维背衬型热塑聚烯烃 (TPO) 防水卷材 PMT-3030 增强型热塑聚烯烃 (TPO) 防水卷材 ---- 规格 : National standard GB Thermoplastic Polyolefin (TPO) Water Proof Sheet Material. Type and Specification ----Type: PMT-3010 homogeneous thermoplastic polyolefin (TPO) waterproofing sheet material. PMT-3020 Fiber backing thermoplastic polyolefin (TPO) waterproofing sheet material. PMT-3030 reinforced thermoplastic polyolefin (TPO) waterproofing sheet material. ----Specification: 卷材厚度 (mm) Thickness of sheet material 卷材宽度 (m) Width of sheet material 卷材长度 (m) Length of sheet material , , 20,

15 合成高分子卷材 Synthetic Macromolecule Sheet Material 合成高分子卷材 Synthetic Macromolecule Sheet Material 兼有乙丙橡胶优异的耐候性和耐久性与聚丙烯的可焊接性 ; 特殊的配方技术, 无需添加任何易使材料变脆的增塑剂 ; 既具有高柔韧性, 并不会产生一般聚烯烃材料因增塑剂迁移而变脆的现象, 保持长久的防水功能 ; 中间夹有一层聚酯纤维织物, 提供卷材高拉伸性能 耐疲劳性能, 耐穿刺性能, 适合于机械固定屋面系统 ; 优异的耐高低温柔韧性能 : 在 -50 下仍保持柔韧性, 在较高温度下保持机械强度 ; 耐化学性 : 耐酸 碱 盐 动植物油 润滑油腐蚀, 耐藻类 霉菌等微生物生长 ; 耐热老化, 尺寸稳定性好 ; 以白色为主的浅色, 表面光滑, 高反射率, 具有较好的节能效果 ; 且耐污染 ; 成分中不含氯化聚合物或氯气, 焊接和使用过程中无氯气释放, 对环境和人体健康无害 ; 搭接采用热焊接, 可形成高强度的密封层 适用于各种工业与民用建筑, 公用建筑等各类屋面防水工程 适用工法 PMT 3030 增强型卷材适用于机械固定防水系统 PMT 3020 纤维背衬型卷材适用于混凝土基层全粘结系统 PMT 3010 均质型卷材适用于泛水 细部节点处理 This product has perfect weather resistance and durability of EPR and has weldability of polypropylene; Special technology for formula,no plasticizer which embrittles material ;it has high flexibility without embrittling phenomenon caused by migration of plasticizer in polyolefin, to have long time waterproofing performance; There is an interlayer of polyester fiber fabric, offering high tensile strength, fatigue resistance, puncture resistance, this product is adaptive to mechanically mounted roofing system ; Exellent low and high temperature flexibility: Flexible even at -50, it still has mechanical strength at higher temperature; Chemical resistance: Resistant to erosion of acid, alkali, salt, plant oil, lubricating oil, resistant to microbial growth like algae and mould etc. Resistance of heat aging, good dimensional stability. White priority light color,smooth surface, high reflectance, better energy saving effect; Pollution resistance. NO chlorinated polymer or chlorine gas in ingredient, therefore no emission of chlorine during welding and other process, harmless to surroundings and humans. We use heatsealing to overlap, in order to form a high strength sealing layer. Used for all kinds of roof waterproofing projects for various industrial building, civil building and public building etc. Application Method of Construction PMT 3030 reinforced sheet material is adaptive to mechanically mounted waterproofing system. PMT 3020 fiber backing sheet material is adaptive to fully bonding concrete base waterproofing system. PMT 3010 homogeneous sheet material is adaptive to waterproofing treatments for water flashing portion and for detail nodes. 雨虹 牌 PMH-3040 高密度聚乙烯自粘胶膜防水卷材 ( 简称 HDPE 自粘胶膜卷材 ), 是专为地下工程开发的一种具有国际前沿技术的能提供与后浇混凝土结构形成牢固结合效果的防水卷材 它是一种以特制的高密度热塑性聚乙烯 (HDPE) 膜为防水基材, HDPE 膜的一个面上覆高分子自粘胶膜 合成粘合剂层外露面上涂抗环境变化保护层和隔离层构成, 属于高分子自粘胶膜防水卷材 卷材长边一侧预留 70mm 宽合成胶粘剂搭接区 卷材自粘层和抗环境变化保护层具有自愈功能, 与液态混凝土浆料反应固结后, 形成防水层与混凝土结构的无间隙结合, 杜绝层间窜水隐患, 能有效提高防水系统的可靠性 YUHONG brand PMH-3040 High Density Polyethylene Self-Adhesive Film Waterproofing Sheet Material (Briefly,HDPE Self-Adhesive Film Waterproofing Sheet Material),this is a waterproofing sheet material which is specially designed for underground engineerings with international advanced technology, it can bind the later cast concrete form a firm structure. It takes the specially-made high density thermoplastic polyethylene (HDPE) film as waterproof base material, on one side of HDPE film we cover with macromolecule self-adhesive film and on the exposed surface of composite adhesive phase we apply weather-resistant protecting layer and insulating layer, it belongs to macromolecule self-adhesive film waterproof sheet material. There is 70mm wide composite adhesive band for overlapping joint along longitudinal direction of the sheet material. There are self-healing function for its self-adhesive layer and weatherresistant layer, it reacts with liquid concrete and cures to be a waterproof layer, this layer binds with concrete firmly and gaplessly, stopping water fleeing, therefore this material is able to increase the liability of waterproofing system. 卷材厚度 Thickness of sheet material (mm) PMH-3040 高密度聚乙烯自粘胶膜防水卷材 PMH-3040 High Density Polyethylene Self-Adhesive Film Waterproofing Sheet Material Q/JBRL 001 高密度聚乙烯自粘胶膜防水卷材 企业标准 产品规格 National standard GB Thermoplastic Polyolefin (TPO) Water Proof Sheet Material. Product Specification 卷材宽度 Width of sheet material (m) 卷材长度 Length of sheet material (m) 1.2, , 或以上 / 20 or above 22 23

16 合成高分子卷材 Synthetic Macromolecule Sheet Material 合成高分子卷材 Synthetic Macromolecule Sheet Material 由高模量热塑性聚乙烯膜 合成粘合剂膜和抗环境变化弹 性涂膜构成的多层复合高分子自粘胶膜防水卷材, 综合性能 优异 ; 全新的湿粘结技术 : 浇筑混凝土时的水泥浆与卷材粘结层 特殊的高分子聚合物湿固化反应粘结, 卷材与结构层混凝土 形成永久的有机结合, 中间无窜水隐患 ; 即使卷材局部遭遇 破 可靠性 ; 坏, 也会将水限定在很小范围内, 完全提高了防水层的 防水卷材与基层空铺, 不受基层沉降变形的影响 ; 抗冲击和耐穿刺性能优异, 能承受直接作用其上的施工荷 载及钢筋骨架的冲击, 而不需要格外的保护, 而直接实施钢 筋混凝土浇筑 ; 合成粘合剂和外表面弹性涂膜层自愈性强, 对于轻微施工 损伤, 有着独特的自我愈合能力 ; 较强的耐化学腐蚀性, 对来自混凝土的碱水有很好的抵抗 性, 不受生活垃圾及生物侵害, 防霉, 耐腐蚀 ; 湿法施工, 无需找平层, 对基层要求低, 不受天气及基层 潮湿影响, 雨季施工及赶工期工程有其独特的明显优势 ; 最低限度的表面处理 : 不需要底油或热气烘干潮湿的基层, 无挥发性物质 ; 无需耗时又耗财力的水泥砂浆保护层 ; 施工方便, 合成胶合剂外露面有一层弹性涂膜保护层, 避 免了表面涂沥青膜的由于外露不能不耐脏, 自粘沥青层外露 造成的麻烦 适用于各种地下建筑 洞库 隧道 地铁 市政建设等防 水抗渗工程 Multiple-layer composite macromolecule self-adhesive film waterproofing sheet material which is made out of high modulus thermoplastic polyethylene membrane,synthetic adhesive film and weather-resistant elastic coating film has exellent comprehensive performance. Brand-new wet-binding technology: When casting concrete, the cement mortar and the macromolecule polymer in the adhesive layer of sheet material moisture cure and bind together,the sheet material and structural layer concrete forms a permanent integration, no water fleeing inside the structure; Even the sheet material is damaged partly, the structure is still able to keep in a small range, to increase the reliability of water-proofing layer. Waterproofing sheet material is vacancy-paved on base, therefore it is not affected by settlement deformation. Perfect shock resistance and puncture resistance, it can bear the impact directly from construction load and from reinforcement cage, no need for extra protection, being able to receive cast of reinforced concrete. Strong self-healing property of symthetic adhesive and outer surface elastic coating film, for the slight construction damage, it has the unique self-healing ability. Strong chemical resistance, resistant to alkali water from concrete, resistant to household refuse and organism, mould resistant and corrosion resistant. Wet-Method construction, leveling is unnecessary, low requirement for base, not affected by weather and base moisture,it has advantage in rainy season construction and for emergency construction. Lowest limit surface treatment: Base oil or heat dry for base is unnecessary, no volatile substance. No need for cement protection layer which comsumes large labor and money. Convenient construction, synthetic adhesive exposed surface has an elastic coating protecting layer, to avoid the dirt invasion on exposed bitumen film. Applied to waterproofing and dampproofing engineerings for various underground builing, cave depot, tunnel, subway and other municipal construction buildings etc. 雨虹 牌 PME EVA 塑料防水板, 是采用乙烯 - 乙酸乙烯共聚物为原料, 加入专用助剂和抗老化剂, 经挤出 压光制成的具有一定厚度的片状防水材料 产品外观一般为半透明白色, 在 地下工程技术规范 称之为塑料防水板 YUHONG brand PME-EVA Plastic Waterproofing Board is a flake waterproofing material with certain thickness, which is made out of the base materials of ethylene-eva, together with dedicated auxiliary and inhibitor, it is extruded and press-polished.the appearance of product is semi-transparent white color, it is also called plastic waterproofing board in Underground Engineering Technical Regulation. 卷材厚度 Thickness of sheet material (mm) PME-EVA 塑料防水板 PME-EVA Plastic Waterproofing Board Product Specification 卷材宽度 Width of sheet material (m) 卷材长度 Length of sheet material (m) ,1.2,1.5, GB 高分子防水材料片材 国家标准 产品规格 拉伸强度高 : 常温下在 16Mpa 以上 ; 断裂伸长率大 : 常 温下可达 550% 以上 ; 耐应力开裂性好, 对构造物的水膨胀 破裂等较容易适应 ; 耐低温弯折性能极佳, 在 -35 以下依然具有良好的弯折 性 ; 能很好地适应环境温度变化 ; 质地柔软, 与基层贴敷性好, 铺设施工方便 ; 耐酸 碱 盐等介质腐蚀 耐霉菌, 对混凝土或沙土中的 酸碱及其他化学物质具有稳定的性能, 适用于隧道 土木等 地下工程 ; 施工性好 : 卷材搭接缝部位可进行热熔焊接, 使得达到理 想的施工效果 主要用于铁路 地铁的隧道防水工程 ; 公路 铁路涵洞的工程防水 ; 各种市政工程 污水处理池 人防工程等地下建筑工程的 防水 防渗 防潮工程 National standard GB Macromolecule Waterproofing Sheet Material. High tensile strength: Over 16Mpa at room temperature; Large elongation: Can reach up to 550% and above at room temperature; Exellent fracture resistance by stress, being very adaptive to water-swelling and fracture of structures. Perfect low temperature bending performance, there will be good flexibility even at -35 ; being very adaptive to surrounding temperature changes. Soft texture, easy to attach to base, convenient paving. Resistant to acid, to alkali,to salt and resistant to mould too, good stability against infection of the acid and alkali or other chemicals in concrete or in the sand, being adaptive to tunnel engineering and civil engineering. Good application property: Sweat soldering can be used for overlapping of sheet material, in order to have ideal construction effect. Mainly used in waterproofing engineering of railway and subway tunnel. Waterproofing engineering of culvert for highway and railway. Waterproofing, anti-permeation and dampproofing engineerings of undergournd buildings like various municipal engineering, sewage treatment pool, air-raid shelter engineering etc.

17 SPU 单组分聚氨酯 SPU Single-Component Polyurethane 雨虹 牌 SPU 单组分聚氨酯是以异氰酸酯 聚醚多元醇为主要原料, 配以各种助剂和填料经聚合反应制成的, 使用时涂覆于防水基层, 通过聚氨酯预聚体中的 NCO 端基与空气中的湿气接触后进行的化学反应, 在基层表面形成坚韧 柔软 无接缝的橡胶防水膜 YUHONG brand SPU Single-Component Polyurethane is made out of the main materials of isocyanate and polyether polyol, together with various auxiliaries and fillers by polyreaction,we coat it on the waterproofing base, after chemical reaction of NCO terminal group of polyurethane prepolymer and moisture in air, it forms a jointless, flexible and strong rubber waterproofing film. GB/T 聚氨酯 国家标准 品种 规格按力学性能分为 Ⅰ 型 Ⅱ 型 单一组分, 现场即开即用, 施工方便 ; 拉伸强度大, 延伸率高, 弹性好, 耐高 低温性能好, 对基层收缩 开裂 变形的适应性强 ; 粘接力强, 在符合要求的各种基面上不需要涂刷基层处理剂 ; 一次厚涂, 涂膜密实, 无针孔 气泡 ; 化学反应成膜, 耐长期水浸蚀 耐腐蚀 耐霉变 耐疲劳 ; 环保性能好, 采用高沸点溶剂, 不含苯 煤焦油成分, 施工时无需另加溶剂 ; 冷施工, 操作方便 适用于地下室 ( 建筑物地下室 地下车库 明挖法地铁和通道 ); 厨房 厕浴间 楼板 阳台 非外露的屋面 ; 游泳池 人造喷泉 水池 水渠的防水 ; 停车场 广场顶板的防水 参考用量 每毫米厚的涂膜, 涂料使用量约为 : Kg/ m2 National standard GB/T Polyurethane. Type and Specification SPU-301: Type Ⅰ and Type Ⅱ. Single component, being available after open the paint can, convenient construction. High tensile strength, large elongation, good elasticity, perfect low and high temperature resistance, and being adaptive to shrinkage, fracture and deformation of base. Strong bonding strength, no need to apply brushing coat of base treating agent on various qualified base surfaces. Large single time coating thickness, compact film, no pinhole, no bubble. Film is formed by chemical reaction, long term resistance of water erosion, corrosion resistance, mould resistance and fatigue resistance; Environmental protection, contains no benzene or coal tar due to usage of high boiling point solvent, adding solvent during construction is unnecessary. Cold construction:easy to use. Adaptive to basement (basement of building, basement parking lot, open-cut subway and passageway). Kitchen, bathroom, floor,balcony, non-exposed roof. Waterproofing engineering of swimming pool, man-made fountain, water pool and water canal. Roof waterproof engineering for parking lot and square. For each millimeter thick film, coating dosage weight is about kg/ m