18 年專業熱工程解決方案經驗, 提供客戶端最佳解決方案並整合完整的熱工程產品列, 提供靈活彈性與即時的服務 熱模擬分析服務導熱介面材料散熱片熱導管均溫板電磁波吸收材料致冷晶片風扇 PRODUCT CATALOGUE MORE INNOVATION LESS HEAT 提供全方位解熱方案 Custo

18 年專業熱工程解決方案經驗, 提供客戶端最佳解決方案並整合完整的熱工程產品列, 提供靈活彈性與即時的服務 熱模擬分析服務散熱片熱導管均溫板電磁波吸收材料致冷晶片風扇 PRODUCT CATALOGUE MORE INNOVATION LESS HEAT 提供全方位解熱方案 Customized Services 無最低訂購量限制 前期測試無負擔 Professional Consultation 根據不同個案的機構設計 找到適合的解熱方案 Fastest Lead Time 送樣最快 1 天 交期 15 天 工作日 4 小時內回覆

目錄 Contents 03 關於高柏 About T-Global 05 產業應用指南 Application Guide P03 P03 P04 11 公司介紹 Introductions 環保政策 Environments 研究開發 Research & Developments 產品與服務 Products & Services P05 電動車與汽配 P06 5G 應用 P07 通訊 P08 面板 P09 電源供應 P10 醫療軍用 Automotive 5th Generation Mobile Networks Telecom Panel Power Supply Medical & Military P1 P4 P8 P30 P31 P38 P39 P4 P43. 導熱矽膠片 : TG-A 系列 TG-A 玻纖系列 TG-AK 系列 GT 系列. 導熱膠帶 : TG-T1000 Li 系列. 導熱膏 : TG-S808 S606 系列. 導熱膠泥 : TG Putty 系列. 導熱絕緣帽套 : CP 系列. 石墨片 石墨烯 : T68 T6 TG-P100 系列. 相變化材料 : TG-V800 系列. 複合式材料 : Ti900 PH3. 導熱封膠 : A96AB S730 S70AB P34. 非矽型導熱材料 : PC 系列 TG-N909 TG-NSP5 Thermal Pad: TG-A Series, TG-A Fiberglass Series, TG-AK Series, GT Series Thermal Tape: TG-T1000, Li Series Thermal Grease: TG-S808, S606 Series Thermal Putty: TG Putty Series Potting Compound: A96AB, S730, S70AB Non-silicone Thermal Materials: PC Series, TG-N909, TG-NSP5 Thermal Insulation Rubber Cap: CP Series Graphite Sheet, Graphene: T68, T6, TG-P100 Series Phase Change Materials: TG-V800 Series Thermal Composite Materials: Ti900, PH3 P45 P45 P48 散熱片. 金屬散熱片 Heat Sink. 陶瓷片 : XL-5 散熱片 XL-5 系列導熱片 Heat Sink Ceramic Heat Spreader: XL-5 Heat Spreader, XL-5 Series Heat Spreader P50 熱導管 Heat Pipe P51 均溫板 Vapor Chamber P5 致冷晶片 Thermoelectric Cooling Chip P53 電磁波吸收材料 Flexible Absorbent Materials 55 參考資料 Reference Materials

公司介紹 Introductions 環保政策 Environments 高柏總公司成立於 003 年 T-Global 專注於全方位解熱方案之研發及材料製造 銷售, 並本著快速服務客戶及彈性生產的理念, 以滿足客戶對於電子產品解熱的各種需求 T-Global 累積多年的研發成果及銷售經驗, 使得我們的產品在不含代理商的客戶下, 於全球已有超過 3,000 家直接客戶的肯定並持續指定使用中 T-Global Technology is dedicated to the development, manufacture and research of thermal solution engineering and materials. We provide our customers with rapid sampling, customized manufacturing and professional technical support. With rich experience in research, development and marketing, T-Global is already become the designated and direct supplier of over 3,000 enterprises worldwide. 1 個通路據點 ( 含經銷或代理商通路 ) 台灣桃園總部 中國東莞 美國洛杉磯 英國路德威斯 中國昆山 T-Global 致力於提供完整而全面的散熱產品與服務, 不論是現有產品或是未來的新興科技,T-Global 都能滿足您的需求, 找到最佳的解決方案 T-Global 團隊能為您提供迅速而敏捷的服務, 透過與合作夥伴共事, 確保 T-Global 的產品與服務能解決您的散熱問題, 我們擁有傲人的企業文化, 以前瞻性的眼光鎖定未來新能源 5G 電動車等新興科技, 專注於與夥伴建立長期穩定的合作關係, 藉此贏得顧客 夥伴與員工的信賴 我們期許自己能為下一代的科技助一臂之力, 藉由創新散熱產品與服務推進科技的發展, 在這裡, 您可以一次購足所需的散熱材料, 我們能為您找到最合適的散熱方案, 替您解決最困擾的散熱問題 At its core, T-Global provides comprehensive thermal products and services, helping companies find the thermal solution they're looking for both in current products and in the technologies of the future. T-Global accomplishes this by providing fast service and remaining agile. We work alongside our partners, doing whatever it takes to make sure that they have the right product and the right solution to solve their thermal challenge. It is through our unique culture that we get this done. We pride ourselves on being reliable to our customers, partners and fellow employees, being Forward-thinking so that we can anticipate the challenges of the future, such as new energy, 5G, and electric vehicles, among others. Being attentive to these issues allows us to be your partner for the long term. In short, T-Global is committed to helping the next generation of technology move forward by providing thermal products and services. We are the company, the people, who answers your thermal problems. We are your one-stop thermal shop. 以愛護大地的地球公民為自我期許 高柏科技所生產的, 皆符合綠色環保及 RoHS REACH 等歐盟相關綠色環保規範 並在日常生活中要求員工執行相關業務活動時, 也需致力於節能 減少二氧化碳 高柏科技在持續追求不斷成長之際, 也以致力愛護大地的地球公民為自我期許, 期許能為地球環保盡一份心力 All products from T-Global are RoHS and REACH compliant. Additionally all employees of T-Global follow a green code of practice. 1. More efficiently use of energy.. Reduced carbon footprint 3. Development on low environmental impact materials T-Global takes CSR (Corporate Social Responsibility)seriously. 03

研究開發 Research & Developments 研究開發與認證 高柏科技自有完整生產工廠於臺灣, 並設有最完整先進的研發總部, 配合技術演進創新 市場趨勢及客戶需求進行不同領域與不同層次的高水平研究開發, 提供客戶資訊 通訊 電信 消費電子 照明 醫療電子及能源等領域的熱管理解決方案. 除了憑藉公司多年經驗技術外, 高柏科技也與在台灣各大技術研發中心及教學院所合作, 如此才能更快速的開發出優良的新產品 身為熱工程解決方案先驅, 高柏科技致力於創造能源永續與高性價比產品, 並持續尋求不斷的進步與升級再達成產業的發展先機, 高柏科技除了擁有經驗豐富的開發及設計團隊, 能針對不同領域的客戶個別需求進行高度客製化的設計外, 本身亦配備有最先進實驗室等級的設備來協助研發人員進行測試並輔佐驗證設計成品, 堅持最高規格的測試儀器並與全球同步更新並行 各個研發及評估流程亦秉持嚴謹細密的精神, 使產品都能呈現穩定的可靠度, 滿足客戶的期許, 最終贏得客戶長久的信賴與支持 高柏科技自有工廠也已取得 ISO9001 ISO14001 認證, 產品符合 UL RoHS 及 REACH 規範, 於熱工程領域中提供更有保障與優異的產品 T-Global Technology has a complete production factory and research department in Taiwan. We keep on doing various innovations to meet the rapid change of marketing demands and customer demands. We offer total thermal solution for the customer in information, communication, electronic, optronics, automotive, lighting and medical device industries. Being the thermal solution engineering leading company in Taiwan, T-Global aimed at producing environmentally friendly and competitive price products. Not only has the well-experienced innovation and design team, but T-Global also can provide customized design services to different industries' customers. Natural Convection Initial Stage Viscous Retentivity Testing Hardness Tester Thermal Conductivity Constant Temperature Constant Temperature Testing Machine Machine and Thermal and Humidity Cabinet and Humidity Cabinet Resistance Test Device High and Constant Dielectric Voltage Dummy Heater Tensile Testing Wind Tunnel Test Thermal Diffusivity Temperature Tester Withstand Test Machine Workshop Measuring Instrument Equipment 04

產業應用指南 Applications Guide 電動車與汽配 Automotive P1 P30 導熱矽膠片 Thermal Pad 導熱膠泥 Thermal Putty P50 熱導管 Heat Pipe 極高的可靠性 Extremely High Reliability 更惡劣的環境 Harsher Environment P58 散熱模組 Thermal Module 更長的使用壽命 Longer Vehicle 更高效的發電功率 More Efficient Power Generation 汽車產業為技術與資本密集的產業之一, 其產業鏈相當龐大 從過去的傳統轎車 SUV 多功能休旅車, 到現在全球各車廠最重視的智慧電動車輛, 汽車產業的發展與應用皆帶動了產業鏈許多商機 隨著 AIoT 的發展, 更開啟了汽車智慧化的更多可能性, 並加速了人與機器 機器與機器間的整合, 包含自駕系統 安全輔助系統 透明顯示元件 車聯網 新型態車用人機介面系統 等, 智慧車輛必定會成為未來的 第三生活空間 The automobile industry is one of the industries with technology and capital intensive. Its industrial chain is quite large. From traditional cars, SUVs, multi-purpose recreational vehicles, to the electric vehicles. For now, the world's car manufacturers pay most attention to electric vehicles. The development and application of the automotive industry have driven many business opportunities in the industry chain. With the development of AIOT, it has opened up more possibilities for smart car and accelerated the integration of human and machine, including self-driving system, safety assist system, transparent display components, car networking, and Human Machine Interface...etc. 產品應用 Applications 電動汽車 混合動力汽車 電源系統 電池模組 車載電子設備 變頻驅動器 充電系統 行車記錄儀 駕駛輔助系統 Electric Vehicles (EV), Hybrid Vehicles (HV), Power Modules, Batteries, Onboard Electronics, Variable Frequency Drives (VFD), Charging System, Driving Recorders, Driving Assistance Systems 產品推薦 Suggested Products 導熱矽膠片 Thermal Pad 導熱膠泥 Thermal Putty 熱導管 Heat Pipe 散熱模組 Thermal Module 05

產業應用指南 Applications Guide 5G 應用 5th Generation Mobile Networks P1 P50 導熱矽膠片 Thermal Pad 熱導管 Heat Pipe P51 均溫板 Vapor Chamber 高導熱性能 High Thermal Performance 可壓縮性 Compressibility P58 散熱模組 Thermal Module 空間限制 Space Limitation 長期穩定性 Long-term Stability 4G 網路僅推出九年, 全球即迎來 5G 技術的時代 為了實現龐大的 5G 服務, 對於基礎 4G 建設的技術演進至關重要, 需要一致且可靠的性能, 並且利用不同的佈署規劃與光纖傳輸技術, 滿足 5G 的容量 改善延遲情況 智慧製造 車聯網 遠端醫療 智慧城市 沉浸式互動娛樂 大規模物聯網 高畫質行動串流等, 皆是 5G 應用可期待的產業 高柏科技憑藉多年的熱工程經驗, 與各大學術合作的研究知識, 不僅解決您目前的散熱挑戰, 更可以與您攜手面對未來所有的困難 After 9 years from the release of 4G network, we are ushered in the era of 5G technologies globally. In order to achieve huge 5G services, it is essential for the technological evolution of basic 4G construction. Consistent and reliable performance is required, and different deployment plans and optical fiber transmission technologies are used to meet 5G capacity and improve latency. Smart manufacturing, connected cars, telemedicine, smart cities, immersive interactive entertainment, large-scale Internet of Things, high-definition mobile streaming, etc. are all promising industries applying 5G. With more than a decade of thermal engineering experiences and research knowledge in cooperation with academics. We will be the partner not only resolving your current cooling challenges, but also overcoming all future thermal-related difficulties. 產品應用 Applications 通訊基地台 光纖模組 智慧製造 車聯網 遠端醫療 智慧城市 沉浸式互動娛樂 大規模物聯網 高畫質行動串流 Cell Site, Fiber-optic Module, Smart Manufacturing, Connected Cars, Telemedicine, Smart Cities, Immersive Interactive Entertainment, Large-scale Internet of Things, High-definition Mobile Streaming 產品推薦 Suggested Products 導熱矽膠片 Thermal Pad 熱導管 Heat Pipe 均溫板 Vapor Chamber 散熱模組 Thermal Module 06

產業應用指南 Applications Guide 通訊 P1 導熱矽膠片 Thermal Pad Telecom P30 導熱膠泥 Thermal Putty P50 熱導管 Heat Pipe 高導熱性能 High Thermal Performance 可壓縮性 Compressibility P58 散熱模組 Thermal Module 空間限制 Space Limitation 長期穩定性 Long-term Stability 近年科技產業最大的亮點, 無非是 5G 的商轉, 除了推進過往的高速行動傳輸應用, 更加速應用於智慧製造 車聯網 遠端醫療 智慧城市 沉浸式互動娛樂 大規模物聯網 高畫質行動串流等產業 為了實現龐大的 5G 全球服務, 電信業者皆緊鑼密鼓的進行 5G 基礎建設, 各家廠商也都在積極布局, 如雲端業者建置運算與儲存設備 AI 業者於智慧型手機的滲透 家庭上網與 Wi-Fi 6 標準結合的家用固定無線接取 (FWA) 等 展望整個通訊產業鏈, 未來十年我們將一起攜手邁向 5G 新紀元 The biggest highlight of the technology industry in recent years is nothing more than the rise of 5G industry. This rise help to accelerate the development of high-speed mobile transmission applications, applications in smart manufacturing, Internet of Vehicles (IoV), remote medical care, smart cities, immersive interactive entertainment, large-scale IoT, High-definition mobile streaming and other industries. In order to achieve 5G global services, telecom operators are intensively building 5G infrastructure, and various manufacturers are also actively deploying, such as cloud operators to build computing and storage devices, AI operators penetrating in smart phones, home Internet and Wi-Fi 6 standard combined with household fixed wireless access (FWA)., etc. In the next ten years, we will move toward to a new era of 5G and we looking forward to it. 產品應用 Applications 行動路由器 家用路由器 機上盒 計算和存儲設備 交換機 收發器 通訊基地台 Mobile Routers, Home Routers, Set-top Boxes, Computing and Storage Devices, Switches, Transceivers, Cell Site 產品推薦 Suggested Products 導熱矽膠片 Thermal Pad 導熱膠泥 Thermal Putty 熱導管 Heat Pipe 散熱模組 Thermal Module 07

產業應用指南 Applications Guide 面板 P1 導熱矽膠片 Thermal Pad Panel P4 導熱膠帶 Thermal Tape P39 石墨片 Graphite Sheet 柔軟性佳 Good Flexibility 成本考量 Cost Considerations P58 散熱模組 Thermal Module 空間限制 Space Limitation 高穩定性 High Stability 目前各廠在顯示面板產業的佈局, 以大尺寸 8K OLED 柔性屏, 四大趨勢為主, 大尺寸面板產業儼然已成為一片紅海 相較過去 LCD 面板與 LED 的背光模組,OLED 憑藉在畫質 輕薄 高屏占比等方面的優勢, 成為手機產業的重要發展方向 而在電競產業, 則以 micro-led, 靠著 ns 級的響應時間與高發光效率 低耗能特性, 搶進電競產業的毫秒商機, 而台灣也將由工業技術研究院引領, 建構 整合台灣的 micro-led 產業鏈, 不僅要在電競產業脫穎而出, 更進一步在車載應用等新興領域, 搶下一片藍海 At present, the display panel industry is mainly based on the four trends of large size, 8K, OLED, flexible screen, and the large size panel industry has become regular.compared with LCD panels and LED backlight modules.in the past, OLEDs have advantages in picture quality, thinness, and high screen ratio, and have become important development directions for the mobile phone industry. In the esports industry, micro-leds rely on ns-level response times, high luminous efficiency, and low energy consumption characteristics to grab digital business opportunities in the e-sports industry. Taiwan will also be LED and transformed by the Industrial Technology Research Institute. The integration of Taiwan's micro-led industry chain must stand out in the esports industry and emerging fields such as automotive applications. 產品應用 Applications 薄型化與柔性屏的產品 T-CON COF LED 背光模組 LCD OLED micro-led TV 穿戴設備 電腦 Thin and Flexible Screen Products, T-CON, COF, LED Backlight Module, LCD, OLED, micro-led, TV, Wearable Device, Computer 產品推薦 Suggested Products 導熱矽膠片 Thermal Pad 導熱膠帶 Thermal Tape 石墨片 Graphite Sheet 散熱模組 Thermal Module 08

產業應用指南 Applications Guide 電源供應 Power Supply P1 P4 P4 導熱矽膠片 Thermal Pad 導熱膠帶 Thermal Tape 相變化材料 Phase Change Materials P43 複合式材料 Composite Materials 高導熱性能 High Thermal Performance 低熱阻 Low Thermal Resistance P58 散熱模組 Thermal Module 高電器絕緣性 High Electrical Insulation 高穩定性與可靠度 High Stability & Reliability 電源供應器主要適用於伺服器 電視 電腦和網通等產品, 為電子業中的傳統產業, 過去筆電及伺服器的價格壓力大 毛利也不斷地遭到壓縮, 但近年來電動車 工業自動化 等事業群已接近收割, 使得電源供應器重新受到重視 且許多新興產業如 5G AI 電競產品 等, 追求的電源供應器元件體積更小 功率提高, 對電源供應器的散熱解決方案是一大挑戰 The power supply is a traditional industry in the electronics industry which mainly applicable to products such as servers, televisions, computers, and Netcom. In the past, the price pressure of laptops and servers was high, and the gross profit was continuously compressed. However, industries such as electric vehicles and industrial automation are gradually rising up which make power supplies again important. Furthermore, many emerging industries such as 5G, AI, e-sports products are pursuing smaller and greater power supply components which is a challenge for the power supply's thermal dissipation solution. 產品應用 Applications PCB PSU 主機板 RAM CPU 硬碟 顯示卡 工業電腦 高速計算電腦 伺服器機房 PCB, PSU, Motherboard, RAM, CPU, Hard Disk, Graphics Card, Industrial Computer, High-speed Computing Computer, Server room 產品推薦 Suggested Products 導熱矽膠片 Thermal Pad 導熱膠帶 Thermal Tape 相變化材料 Phase Change Materials 複合式材料 Composite Materials 散熱模組 Thermal Module 09

產業應用指南 Applications Guide 醫療軍用 Medical & Military P1 P8 導熱矽膠片 Thermal Pad 導熱膏 Thermal Grease P51 均溫板 Vapor Chamber 高導熱性能 High Thermal Performance 更惡劣的環境 Harsher Environment P58 散熱模組 Thermal Module 更長的使用壽命 Longer Vehicle 極高的可靠性 Extremely High Reliability 軍規與醫療產業, 托 5G 的帶動, 未來在技術應用上也更加的廣泛與創新, 如虛擬實境技術, 可建構一個三維戰場環境圖像, 有利軍隊在作戰時進行虛擬練習 ; 也成為醫療人員訓練時的助力, 省去活體實驗的成本 另外人工智慧的技術, 也將取代部分人力, 透過大數據進行大量的運算, 提高軍事與醫療的精準度 而綜觀軍事與醫療的產品規格, 皆要求精確 穩定性佳 可靠度高的產品與解熱方案, 可預期未來的技術, 將帶給軍用與醫療產業嶄新的革命 高柏科技也持續走在市場與技術的最前端, 與各大學術單位 研究中心合作, 研發全球最薄均溫板, 預計可為產業帶來革命性創新 Military regulations and the medical industry supported by 5G, they will also be more extensive and innovative in technology applications in the future. For instance, virtual reality technology, which can construct a three-dimensional battlefield environment image, which is conducive to the military to conduct virtual exercises during combat. Also, become medical personnel during training process, in order to eliminating the cost of living experiments. In addition, artificial intelligence technology will also replace part of labor forces, and perform a large number of calculations through big data to improve military and medical accuracy. Looking at the military and medical product specifications, all require precise, stable, and reliable products and solutions. It is expected that future technologies will bring a new revolution in the military and medical industries. T-Global Technology also continues to be at the forefront of the market and technology, and cooperates with major academic institution and research centers to research and develop the world's thinnest vapor chamber, which is expected to bring revolutionary innovation to the industry. 產品應用 Applications 醫療儀器設備 醫療顯示器 軍事運輸 軍事電子設備 國防機械 Medical Equipment, Medical Display, Military Transportation, Military Electronic Equipment, Defense Machinery 產品推薦 Suggested Products 導熱矽膠片 Thermal Pad 導熱膏 Thermal Grease 均溫板 Vapor Chamber 散熱模組 Thermal Module 10

所有散熱 都是從導熱開始 Customized Service Professional Consultation Fasteast Lead Time 注意 : 本技術數據表內的資訊是根據高柏團隊的研究與測試得出的最佳數據 本技術數據表中列出的值僅代表典型值, 並非對每一批生產的物料都進行測試 所有規格如有變更, 恕不另行通知 ; 無影響產品功能之保護膜, 如非特殊要求, 皆依高柏默認為準 由於各種可能的使用條件超出了我們的控制範圍, 因此我們提出的所有建議均不構成保證或責任, 用戶應自行進行測試, 以確定我們的產品在任何特定情況下的適用性 本產品的銷售沒有任何明示或暗示的說明, 表示其適用於特定目的或其他用途的保證, 但本產品應依據高柏與您確認的發票 報價 或訂單, 提供最標準的產品質量 我們不承擔使用者如何延伸或改變此技術數據表中的資訊, 使用者應承擔所有風險 此外, 本技術數據表中的資訊不包含任何內容解釋與涉及產品材料的現有用途 未來專利衝突 工藝製造, 與使用產品的建議 NOTICE: The information contained herein is to the best of our knowledge true and accurate. Values stated in this technical data sheet represent typical values as not all tests are run on each lot of material produced. All specifications are subject to change without notice. The protective film does not affect the function of the product. If there is no special requirement, the default depends on T-Global. Since the varied conditions of potential use are beyond our control, all recommendations or suggestions are presented without guarantee or responsibility on our part and users should make their own test to determine the suitability of our products in any specific situation. This product is sold without warranty either expressed or implied, of fitness for a particular purpose or otherwise, except that this product shall be of standard quality, and except to the extent otherwise stated in T-Global Technology s invoice, quotation, or order acknowledgment. We disclaim any and all liabilities incurred in connection with the use of information contained herein, or otherwise. All risks of such are assumed by the user. Furthermore, nothing contained herein shall be construed as a recommendation to use any process or to manufacture or to use any product in conflict with existing or future patents covering any product or material or its use. 11

導熱矽膠片 Thermal Pad TG-A00 超軟導熱矽膠片 Ultra Soft Thermal Pad REACH Compliant RoHS Compliant UL Compliant 單面無黏性, 方便施工 One side is non-sticky and easy to assemble 超軟特性, 壓縮性好 Ultra soft and good compressibility 絕緣性佳 Good insulation 極適用於高效能產品 Best for high power applications 熱阻抗 VS. 壓力 VS. 變形量示意圖 Thermal Resistance VS. Pressure VS. Deflection Pressure(psi) R( C-in²/W) Deflection(%) 10 1.460 38 30 1.390 50 50 1.300 5 導熱係數 Thermal Conductivity :. W/mK 硬度 Hardness : 15 (Shore 00) 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 0 5 10 15 0 5 30 40 80 Properties TG-A00 Unit Tolerance Test Method 導熱係數 Thermal Conductivity. W/mK ±10% ASTM D5470 厚度 Thickness 0.5~.0 mm - ASTM D374 0.0197~0.0787 inch - ASTM D374 顏色 Color 灰 Gray - - 目視 Visual 耐燃等級 Flame Rating V-1 - - UL 94 耐電壓 Dielectric Breakdown Voltage 5 KV/mm ±10% ASTM D149 重量損失 Weight Loss <1 % - ASTM E595 密度 Density.7 g/cm³ ±10% ASTM D79 工作溫度 Working Temperature -40~+180 C - - 體積阻抗 Volume Resistance 3 10¹² Ohm-m - ASTM D57 延展率 Elongation 55 % - ASTM D41 標準規格 Standard Format 單片狀 Sheets one - - - 硬度 Hardness 15 Shore 00 ±5 ASTM D40 可依需求沖型裁切 Pre-cut for different shapes 1

導熱矽膠片 Thermal Pad TG-A3500 超軟導熱矽膠片 Ultra Soft Thermal Pad REACH Compliant RoHS Compliant UL Compliant 良好的導熱特性 Very good thermal conductivity 高壓縮性 High compressibility and compliancy 具自黏性 Natural tack 極適用於高效能產品 Best for high power applications 熱阻抗 VS. 壓力 VS. 變形量示意圖 Thermal Resistance VS. Pressure VS. Deflection Pressure(psi) R( C-in²/W) Deflection(%) 10 0.610 30 30 0.510 4 50 0.490 50 導熱係數 Thermal Conductivity : 3.5 W/mK 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 硬度 Hardness : 30 (Shore 00) 0 5 10 15 0 5 30 40 80 Properties TG-A3500 Unit Tolerance Test Method 導熱係數 Thermal Conductivity 3.5 W/mK ±10% ASTM D5470 厚度 Thickness 0.5~8.0 mm - ASTM D374 0.0197~0.3149 inch - ASTM D374 顏色 Color 黃 Yellow - - 目視 Visual 耐燃等級 Flame Rating V-0 - - UL 94 耐電壓 Dielectric Breakdown Voltage 6 KV/mm ±10% ASTM D149 重量損失 Weight Loss <1 % - ASTM E595 密度 Density.3 g/cm³ ±10% ASTM D79 工作溫度 Working Temperature -50~+150 C - - 體積阻抗 Volume Resistance 8 10¹² Ohm-m - ASTM D57 延展率 Elongation 80 % - ASTM D41 標準規格 Standard Format 單片狀 Sheets one - - - 硬度 Hardness 30 Shore 00 ±15 ASTM D40 可依需求沖型裁切 Pre-cut for different shapes 13

導熱矽膠片 Thermal Pad TG-A4500 超軟導熱矽膠片 Ultra Soft Thermal Pad REACH Compliant RoHS Compliant UL Compliant 高導熱特性 High thermal conductivity 高壓縮性 High compressibility and compliancy 具自黏性 Natural tack 極適用於高效能產品 Best for high power applications 熱阻抗 VS. 壓力 VS. 變形量示意圖 Thermal Resistance VS. Pressure VS. Deflection Pressure(psi) R( C-in²/W) Deflection(%) 10 0.465 1 30 0.405 38 50 0.369 5 導熱係數 Thermal Conductivity : 4.5 W/mK 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 硬度 Hardness : 50 (Shore 00) 0 5 10 15 0 5 30 40 80 Properties TG-A4500 Unit Tolerance Test Method 導熱係數 Thermal Conductivity 4.5 W/mK ±10% ASTM D5470 厚度 Thickness 0.5~8.0 mm - ASTM D374 0.0197~0.3149 inch - ASTM D374 顏色 Color 紫 Purple - - 目視 Visual 耐燃等級 Flame Rating V-0 - - UL 94 耐電壓 Dielectric Breakdown Voltage 6 KV/mm ±10% ASTM D149 重量損失 Weight Loss <1 % - ASTM E595 密度 Density 3.1 g/cm³ ±10% ASTM D79 工作溫度 Working Temperature -50~+150 C - - 體積阻抗 Volume Resistance 1 10¹³ Ohm-m - ASTM D57 延展率 Elongation 50 % - ASTM D41 標準規格 Standard Format 單片狀 Sheets one - - - 硬度 Hardness 50 Shore 00 ±15 ASTM D40 可依需求沖型裁切 Pre-cut for different shapes 14

導熱矽膠片 Thermal Pad TG-A600 超軟導熱矽膠片 Ultra Soft Thermal Pad REACH Compliant RoHS Compliant UL Compliant 高導熱特性 High thermal conductivity 高壓縮性 High compressibility and compliancy 具自黏性 Natural tack 極適用於高效能產品 Best for high power applications 熱阻抗 VS. 壓力 VS. 變形量示意圖 Thermal Resistance VS. Pressure VS. Deflection Pressure(psi) R( C-in²/W) Deflection(%) 10 0.380 1 30 0.90 38 50 0.45 5 導熱係數 Thermal Conductivity : 6. W/mK 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 硬度 Hardness : 50 (Shore 00) 0 5 10 15 0 5 30 40 80 Properties TG-A600 Unit Tolerance Test Method 導熱係數 Thermal Conductivity 6. W/mK ±10% ASTM D5470 厚度 Thickness 0.5~8.0 mm - ASTM D374 0.0197~0.3149 inch - ASTM D374 顏色 Color 藍 Blue - - 目視 Visual 耐燃等級 Flame Rating V-0 - - UL 94 耐電壓 Dielectric Breakdown Voltage 6 KV/mm ±10% ASTM D149 重量損失 Weight Loss <1 % - ASTM E595 密度 Density 3.1 g/cm³ ±10% ASTM D79 工作溫度 Working Temperature -50~+150 C - - 體積阻抗 Volume Resistance 1 10¹³ Ohm-m - ASTM D57 延展率 Elongation 50 % - ASTM D41 標準規格 Standard Format 單片狀 Sheets one - - - 硬度 Hardness 50 Shore 00 ±15 ASTM D40 可依需求沖型裁切 Pre-cut for different shapes 15

導熱矽膠片 Thermal Pad TG-A150 超軟導熱矽膠片 Ultra Soft Thermal Pad REACH Compliant RoHS Compliant UL Compliant 高導熱特性 High thermal conductivity 低熱阻 Low thermal resistance 高壓縮性 High compressibility and compliancy 絕緣性佳 Good electrical insulation 極適用於高效能產品 Best for high power applications 熱阻抗 VS. 壓力 VS. 變形量示意圖 Thermal Resistance VS. Pressure VS. Deflection Pressure(psi) R( C-in²/W) Deflection(%) 10 0.304 19 30 0.194 53 50 0.147 58 導熱係數 Thermal Conductivity : 1.5 W/mK 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 硬度 Hardness : 50 (Shore 00) 0 5 10 15 0 5 30 40 80 Properties TG-A150 Unit Tolerance Test Method 導熱係數 Thermal Conductivity 1.5 W/mK ±10% ASTM D5470 厚度 Thickness 0.5~8.0 mm - ASTM D374 0.0197~0.3149 inch - ASTM D374 顏色 Color 綠 Green - - 目視 Visual 耐燃等級 Flame Rating V-0 - - UL 94 耐電壓 Dielectric Breakdown Voltage 6.5 KV/mm ±10% ASTM D149 重量損失 Weight Loss <1 % - ASTM E595 密度 Density 3.3 g/cm³ ±10% ASTM D79 工作溫度 Working Temperature -50~+150 C - - 體積阻抗 Volume Resistance 1 10¹³ Ohm-m - ASTM D57 延展率 Elongation 40 % - ASTM D41 標準規格 Standard Format 單片狀 Sheets one - - - 硬度 Hardness 50 Shore 00 ±8 ASTM D40 可依需求沖型裁切 Pre-cut for different shapes 16

導熱矽膠片 Thermal Pad TG-A1450 超軟導熱矽膠片 Ultra Soft Thermal Pad REACH Compliant RoHS Compliant UL Compliant 高導熱特性 High thermal conductivity 低熱阻 Low thermal resistance 絕緣性佳 Good electrical insulation 極適用於高效能產品 Best for high power applications 熱阻抗 VS. 壓力 VS. 變形量示意圖 Thermal Resistance VS. Pressure VS. Deflection Pressure(psi) R( C-in²/W) Deflection(%) 10 0.3 5 30 0.150 35 50 0.1 55 導熱係數 Thermal Conductivity : 14.5 W/mK 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 硬度 Hardness : 60 (Shore 00) 0 5 10 15 0 5 30 40 80 Properties TG-A1450 Unit Tolerance Test Method 導熱係數 Thermal Conductivity 14.5 W/mK ±10% ASTM D5470 厚度 Thickness 0.5~.0 mm - ASTM D374 0.0197~0.0787 inch - ASTM D374 顏色 Color 紅 Red - - 目視 Visual 耐燃等級 Flame Rating V-0 - - UL 94 耐電壓 Dielectric Breakdown Voltage 4 KV/mm ±10% ASTM D149 重量損失 Weight Loss <1 % - ASTM E595 密度 Density 3.6 g/cm³ ±10% ASTM D79 工作溫度 Working Temperature -50~+150 C - - 體積阻抗 Volume Resistance 7 10¹² Ohm-m - ASTM D57 延展率 Elongation 30 % - ASTM D41 標準規格 Standard Format 單片狀 Sheets one - - - 硬度 Hardness 60 Shore 00 ±5 ASTM D40 可依需求沖型裁切 Pre-cut for different shapes 17

導熱矽膠片 Thermal Pad TG-A1660 超軟導熱矽膠片 Ultra Soft Thermal Pad REACH Compliant RoHS Compliant UL Compliant 高導熱特性 High thermal conductivity 低熱阻 Low thermal resistance 絕緣性佳 Good electrical insulation 極適用於高效能產品 Best for high power applications 熱阻抗 VS. 壓力 VS. 變形量示意圖 Thermal Resistance VS. Pressure VS. Deflection Pressure(psi) R( C-in²/W) Deflection(%) 10 0.09 19 30 0.11 4 導熱係數 Thermal Conductivity : 16.6 W/mK 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 硬度 Hardness : 65 (Shore 00) 0 5 10 15 0 5 30 40 80 Properties TG-A1660 Unit Tolerance Test Method 導熱係數 Thermal Conductivity 16.6 W/mK ±10% ASTM D5470 厚度 Thickness 0.5~.0 mm - ASTM D374 0.0197~0.0787 inch - ASTM D374 顏色 Color 深灰 Dark Gray - - 目視 Visual 耐燃等級 Flame Rating V-0 - - UL 94 耐電壓 Dielectric Breakdown Voltage 5 KV/mm ±10% ASTM D149 重量損失 Weight Loss <1 % - ASTM E595 密度 Density 3.6 g/cm³ ±10% ASTM D79 工作溫度 Working Temperature -50~+150 C - - 體積阻抗 Volume Resistance 5 10¹² Ohm-m - ASTM D57 延展率 Elongation 0 % - ASTM D41 標準規格 Standard Format 單片狀 Sheets one - - - 硬度 Hardness 65 Shore 00 ±5 ASTM D40 可依需求沖型裁切 Pre-cut for different shapes 18

導熱矽膠片 Thermal Pad TG-A1780 超軟導熱矽膠片 Ultra Soft Thermal Pad REACH Compliant RoHS Compliant UL Compliant 高導熱特性 High thermal conductivity 低熱阻 Low thermal resistance 絕緣性佳 Good electrical insulation 極適用於高效能產品 Best for high power applications 熱阻抗 VS. 壓力 VS. 變形量示意圖 Thermal Resistance VS. Pressure VS. Deflection Pressure(psi) R( C-in²/W) Deflection(%) 10 0.161 1 30 0.089 18 導熱係數 Thermal Conductivity : 17.8 W/mK 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 硬度 Hardness : 65 (Shore 00) 0 5 10 15 0 5 30 40 80 Properties TG-A1780 Unit Tolerance Test Method 導熱係數 Thermal Conductivity 17.8 W/mK ±10% ASTM D5470 厚度 Thickness 0.5~.0 mm - ASTM D374 0.0197~0.0787 inch - ASTM D374 顏色 Color 淺灰 Light Gray - - 目視 Visual 耐燃等級 Flame Rating V-0 - - UL 94 耐電壓 Dielectric Breakdown Voltage 4 KV/mm ±10% ASTM D149 重量損失 Weight Loss <1 % - ASTM E595 密度 Density 3.5 g/cm³ ±10% ASTM D79 工作溫度 Working Temperature -50~+150 C - - 體積阻抗 Volume Resistance 6 10¹² Ohm-m - ASTM D57 延展率 Elongation 0 % - ASTM D41 標準規格 Standard Format 單片狀 Sheets one - - - 硬度 Hardness 65 Shore 00 ±5 ASTM D40 可依需求沖型裁切 Pre-cut for different shapes 19

導熱矽膠片 Thermal Pad TG-A 玻纖系列導熱矽膠片 Fiberglass Mesh Series Thermal Pad REACH Compliant RoHS Compliant UL Compliant 高導熱特性 High thermal conductivity 表面附著玻纖 Fiberglass on one side 不易變形 Non deforming 絕緣耐電壓高 Electrical insulation 適用須耐電壓產品 Suitable for voltage-resistant products 熱阻抗 VS. 壓力 VS. 變形量示意圖 Thermal Resistance VS. Pressure VS. Deflection TG-A3500F Pressure(psi) R( C-in²/W) Deflection(%) 10 0.91 4 30 0.86 6 50 0.8 7 TG-A4500F Pressure(psi) R( C-in²/W) Deflection(%) 10 0.59 3 30 0.56 5 50 0.53 7 TG-A600F Pressure(psi) R( C-in²/W) Deflection(%) 10 0.53 3 30 0.51 5 50 0.48 7 導熱係數 Thermal Conductivity : 3/4/5 W/mK 硬度 Hardness : 30/50/50 (Shore 00) 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 0 5 10 15 0 5 30 40 80 Properties TG-A3500F TG-A4500F TG-A600F Unit Tolerance Test Method 導熱係數 Thermal Conductivity 3 4 5 W/mK ±10% ASTM D5470 厚度 Thickness 0.5~8.0 mm - ASTM D374 0.0197~0.3149 inch - ASTM D374 顏色 Color 黃 Yellow 紫 Purple 藍 Blue - - 目視 Visual 補強材 Reinforcement Carrier 玻纖 Fiberglass mesh - - - 耐燃等級 Flame Rating V-0 - - UL 94 耐電壓 Dielectric Breakdown Voltage >6 KV/mm ±10% ASTM D149 重量損失 Weight Loss <1 % - ASTM E595 密度 Density.3 3.1 3.1 g/cm³ ±10% ASTM D79 工作溫度 Working Temperature -50~+150 C - - 體積阻抗 Volume Resistance 8 10¹² 1 10¹³ 1 10¹³ Ohm-m - ASTM D57 延展率 Elongation 80 50 50 % - ASTM D41 標準規格 Standard Format 單片狀 Sheets one - - - 硬度 Hardness (Silicone Side) 30 50 50 Shore 00 ±15 ASTM D40 可依需求沖型裁切 Pre-cut for different shapes 0

導熱矽膠片 Thermal Pad TG-AK 高性能導熱矽膠片 High Performance Thermal Pad REACH Compliant RoHS Compliant UL Compliant 導熱良好 Great thermal conductivity 不易變形 Difficult to be deformed 施工性佳 Easy to assemble 適用於中低功率產品 Best for low and medium power applications 熱阻抗 VS. 壓力 VS. 變形量示意圖 Thermal Resistance VS. Pressure VS. Deflection TG-A0KX TG-A38KX TG-A0KF TG-A38KF Pressure(psi) R( C-in²/W) Deflection(%) Pressure(psi) R( C-in²/W) Deflection(%) Pressure(psi) R( C-in²/W) Deflection(%) Pressure(psi) R( C-in²/W) Deflection(%) 10 1.481 8 30 1.350 13 50 1.0 17 10 0.770 9 30 0.715 13 50 0.67 19 10 1.688 4 30 1.67 6 50 1.640 7 10 0.868 3 30 0.845 6 50 0.83 7 導熱係數 Thermal Conductivity : /3.8/1.8/3.3 W/mK 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 硬度 Hardness : 55/60/55/60 (Shore 00) 0 5 10 15 0 5 30 40 80 TG-A0KF TG-A0KX TG-A38KF TG-A38KX TG-A0KX/KF TG-A38KX/KF Properties TG-A0KX TG-A38KX TG-A0KF TG-A38KF Unit Tolerance Test Method 導熱係數 Thermal Conductivity 3.8 1.8 3.3 W/mK ±10% ASTM D5470 厚度 Thickness 0.5~10.0 mm - ASTM D374 0.0197~0.394 inch - ASTM D374 顏色 Color 深灰 Dark Gray 藍 Blue 深灰 Dark Gray 藍 Blue - - 目視 Visual 補強材 Reinforcement Carrier - 玻纖 Fiberglass mesh - - - 耐燃等級 Flame Rating V-0 - - UL 94 耐電壓 Dielectric Breakdown Voltage >5 >5 >8 >8 KV/mm ±10% ASTM D149 重量損失 Weight Loss <1 <1 <1 <1 % - ASTM E595 密度 Density 3.1.1 3.1 g/cm³ ±10% ASTM D79 工作溫度 Working Temperature -40~+180-40~+00-40~+180-40~+00 C - - 體積阻抗 Volume Resistance 3 10¹² Ohm-m - ASTM D57 延展率 Elongation 160 110 160 (Silicone Side) 110 (Silicone Side) % - ASTM D41 標準規格 Standard Format 單片狀 Sheets one - - - 硬度 Hardness 55 60 可依需求沖型裁切 Pre-cut for different shapes 55 (Silicone Side) 60 (Silicone Side) Shore 00 ±8 ASTM D40 1

導熱矽膠片 Thermal Pad GT10D 導熱矽膠片 Thermal Pad RoHS Compliant 光滑的表面和低熱阻 Smooth surface & low contact resistance 低熱阻抗 Low thermal resistance 良好的穩定性 High stabality 高可信度 Great reliability 導熱係數 Thermal Conductivity : 1.5 W/mK 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 硬度 Hardness : 75 (Shore A) 0 5 10 15 0 5 30 40 80 Properties GT10D Unit Tolerance Test Method 導熱係數 Thermal Conductivity 1.5 W/mK ±10% ASTM D5470 厚度 Thickness 0.5 mm - ASTM D374 顏色 Color 粉紅 Pink - - 目視 Visual 補強材 Reinforcement Carrier 玻纖 Fiberglass mesh - - - 耐電壓 Dielectric Breakdown Voltage 4 KV ±10% ASTM D149 重量損失 Weight Loss <0. % - ASTM E595 密度 Density g/cm³ ±10% ASTM D79 工作溫度 Working Temperature -45~+180 C - - 體積阻抗 Volume Resistance >10¹² Ohm-m - ASTM D57 延展率 Elongation 50 % - ASTM D41 抗拉強度 Tensile Strength >150 kgf/cm² - ASTM D41 標準規格 Standard Format 單片狀 Sheets one - - - 硬度 Hardness 75 Shore A ±7 ASTM D40 可依需求沖型裁切 Pre-cut for different shapes

導熱矽膠片 Thermal Pad GT 系列導熱矽膠片 Thermal Pad REACH Compliant RoHS Compliant UL Compliant 光滑的表面和低熱阻 Smooth surface & low contact resistance 適用於恆溫輻射範圍之內 Usable over a wide temperature range 電氣隔離與高耐電壓 Electrical insulation; high breakdown voltage 適用於恆溫輻射範圍之內 Usable over a wide temperature range 熱阻抗 VS. 壓力 VS. 變形量示意圖 Thermal Resistance VS. Pressure VS. Deflection GT15 Pressure(psi) R( C-in²/W) Deflection(%) 10 0.67 <.6 30 0.49 <.6 50 0.39 18 GT0 Pressure(psi) R( C-in²/W) Deflection(%) 10 0.49 <.6 30 0.41 <.6 50 0.34 GT30 Pressure(psi) R( C-in²/W) Deflection(%) 10 0.5 <.6 30 0.41 <.6 50 0.37 6 導熱係數 Thermal Conductivity : 1.6/.1/3. W/mK 硬度 Hardness : 75/70/70 (Shore A) 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 0 5 10 15 0 5 30 40 80 Properties GT15 GT0 GT30 Unit Tolerance Test Method 導熱係數 Thermal Conductivity 1.6.1 3. W/mK ±10% ASTM D5470 厚度 Thickness 0.3 0.3 0.35 mm - ASTM D374 顏色 Color 黃 Yellow 綠 Green 粉紅 Pink - - 目視 Visual 補強材 Reinforcement Carrier 玻纖 Fiberglass mesh - - - 耐燃等級 Flame Rating V-0 - - UL 94 耐電壓 Dielectric Breakdown Voltage (AC) 4.1 4.1 3.1 KV/mm ±10% ASTM D149 耐電壓 Dielectric Breakdown Voltage (DC) 6.1 6.1 5.1 KV/mm ±10% ASTM D149 重量損失 Weight Loss <0. % - ASTM E595 密度 Density.3.6.8 g/cm³ ±10% ASTM D79 工作溫度 Working Temperature -45~+180 C - - 體積阻抗 Volume Resistance >10¹² >10¹² >10¹⁰ Ohm-m - ASTM D57 延展率 Elongation 60 60 30 % - ASTM D41 抗拉強度 Tensile Strength 00 00 100 kgf/cm² - ASTM D41 標準規格 Standard Format 單片狀 Sheets one - - - 硬度 Hardness 75 70 70 Shore A ±3 ASTM D40 可依需求沖型裁切 Pre-cut for different shapes 3

導熱膠帶 Thermal Tape TG-T1000 導熱膠帶 Thermal Tape REACH Compliant RoHS Compliant 良好的黏著性 (Acrylic PSA) Good adhesion 高可靠度 Great reliability C/P 值高 Cost effective with great performance 加工容易 Easy to assemble 依需求客製化 Customization services for different industries 保存方式 Storage 建議保存於 5 以下之環境, 並於 6 個月內使用完畢, 以保持膠帶及離型紙具適當的黏合度 T-global guarantees a 6 month shelf life at maximum continuous storage. Storage temperature should under 5 to maintain controlled adhesion to the liner. 導熱係數 Thermal Conductivity : 1 W/mK 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 Properties TG-T1000 Unit Tolerance Test Method 導熱係數 Thermal Conductivity 1 1 1 W/mK ±10% ASTM D5470 厚度 Thickness 0.15 0.5 0.5 mm - ASTM D374 顏色 Color 白 White - - 目視 Visual 補強材 Reinforcement Carrier 玻纖 Fiberglass mesh - - - 工作溫度 Continuous Working Temperature -30~10 C - - 短期耐溫 Short time use temperature (30sec) 180 C - - 密度 Density 1. g/cm³ - ASTM D79 初期黏性 Initial Tack 19 11 5 cm - PSTC-6 保持力 Holding Power 1000g@5 Cusing 1 in² >3000 min - PSTC-7 剝離強度 180 Peeling Strength (aluminum) >14 >16 >19 N / 5mm - PSTC-101 耐電壓 Dielectric Breakdown Voltage (AC) 3 5 KV ±10% ASTM D149 熱阻抗 Thermal Impedance@10psi 0.93 1.6 1.6 C-in² / W ASTM D5470 熱阻抗 Thermal Impedance@30psi 0.76 1.06 1.33 C-in² / W - ASTM D5470 熱阻抗 Thermal Impedance@50psi 0.61 1.05 1.19 C-in² / W - ASTM D5470 可依需求沖型裁切 Pre-cut for different shapes 可製成捲料 Roll type is available 4

導熱膠帶 Thermal Tape Li98 導熱膠帶 Thermal Tape REACH Compliant RoHS Compliant 良好的黏著性 (Acrylic PSA) Good adhesion 高可靠度 Great reliability C/P 值高 Cost effective with great performance 加工容易 Easy to assemble 依需求客製化 Customization services for different industries 保存方式 Storage 建議保存於 5 以下之環境, 並於 6 個月內使用完畢, 以保持膠帶及離型紙具適當的黏合度 T-global guarantees a 6 month shelf life at maximum continuous storage. Storage temperature should under 5 to maintain controlled adhesion to the liner. 導熱係數 Thermal Conductivity : 1(Li98) / 1.3(Li98T) / 1.9(Li98C) /.1(Li98CN) W/mK 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 Li98 Li98T Li98C Li98CN Properties Li98 Li98T Li98C Li98CN Unit Tolerance Test Method 導熱係數 Thermal Conductivity 1 1 1.3 1.9 1.9.1 W/mK ±10% ASTM D5470 厚度 Thickness 0.15 0.5 0.11 0.15 0.5 0.18 mm - ASTM D374 顏色 Color 白 White - 目視 Visual 補強材 Reinforcement Carrier 玻纖 Fiberglass mesh PET 玻纖 Fiberglass mesh - - - - 工作溫度 Continuous Working Temperature -30~+10-60~+10-30~+10 C - - 短期耐溫 Short time use temperature (30sec) 00 C - - 密度 Density 1.85 1.6 1.8 1.8 1.8 g/cm³ - ASTM D79 抗拉強度 Tensile strength 00 400 400 00 400 - psi - ASTM D41 玻璃轉化溫度 Glass Transition temperature -30-30 - -7-7 -30 C - - 初期黏性 Initial Tack 10 8 10 14 1 15 cm - PSTC-6 剪切強度 Lap Shear Strength 61 60 55 50 55 N/cm² - ASTM D100 晶片抗切強度 Die Shear Strength@5 C 10 105 109 100 100 N/cm² - - 晶片抗切強度 Die Shear Strength@80 C 69 60 68 68 55 N/cm² - - 保持力 Holding Power 1000g@5 Cusing 1 in >1000 min - PSTC-7 保持力 Holding Power 1000g@80 Cusing 1 in >1000 min - PSTC-7 剝離強度 180 Peeling Strength (Aluminum) >10 >1 >1 >6 >8 >8 N/in - ASTM D3330 耐電壓 Dielectric Breakdown Voltage (AC) 3.1 4.1 3.1 5.1 KV ±10% ASTM D149 耐電壓 Dielectric Breakdown Voltage (DC) 3.1 4.1 5.1 3.1 4.1 6.1 KV ±10% ASTM D149 熱阻抗 Thermal Impedance@10psi 0.93 1.6 0.63 0.64 0.89 0.73 C-in²/W - ASTM D5470 熱阻抗 Thermal Impedance@30psi 0.76 1.05 0.60 0.60 0.85 0.68 C-in²/W - ASTM D5470 熱阻抗 Thermal Impedance@50psi 0.61 1.06 0.59 0.53 0.87 0.66 C-in²/W - ASTM D5470 可依需求沖型裁切 Pre-cut for different shapes 可製成捲料 Roll type is available 5

導熱膠帶 Thermal Tape Li98P/Liv 導熱膠帶 Thermal Tape REACH Compliant RoHS Compliant UL Compliant 耐電壓高 High voltage resistance 良好的黏著性 (Acrylic PSA) Good adhesive 高可靠度 Great reliability 加工容易 Easy to assemble 依需求客製化 Customization services for different industries 保存方式 Storage 建議保存於 5 以下之環境, 並於 6 個月內使用完畢, 以保持膠帶及離型紙具適當的黏合度 T-global guarantees a 6 month shelf life at maximum continuous storage. Storage temperature should under 5 to maintain controlled adhesion to the liner. 導熱係數 Thermal Conductivity : 1.8(Li98P) / 1.1(Liv) W/mK 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 Liv Li98P Properties Li98P Liv Unit Tolerance Test Method 導熱係數 Thermal Conductivity 1.8 1.8 1.1 1.1 W/mK ±10% ASTM D5470 厚度 Thickness 0.15 0.14 0.15 0.5 mm - ASTM D374 顏色 Color 白 White - - 目視 Visual 補強材 Reinforcement Carrier Polyimide Fiberglass Mesh - - - 工作溫度 Continuous Working Temperature -30~+10 C - - 短期耐溫 Short time use temperature (30sec) 50 50 180 180 C - - 密度 Density 1.3 1. 1.85 1.85 g/cm³ - ASTM D79 抗拉強度 Tensile strength 500 600 00 400 psi - ASTM D41 玻璃轉化溫度 Glass Transition temperature -5-5 -30-30 C - - 初期黏性 Initial Tack 15 15 11 10 cm - PSTC-6 剪切強度 Lap Shear Strength 63 6 60 60 N/cm² - ASTM D100 晶片抗切強度 Die Shear Strength@5 C 115 115 10 10 N/cm² - - 晶片抗切強度 Die Shear Strength@80 C 66 64 69 69 N/cm² - - 保持力 Holding Power 1000g@5 Cusing 1 in >10000 min - PSTC-7 保持力 Holding Power 1000g@80 Cusing 1 in >10000 min - PSTC-7 剝離強度 180 Peeling Strength (Aluminum) >10 >10 15 16 N/in - ASTM D3330 耐電壓 Dielectric Breakdown Voltage (AC) 4.1 5.1.1 3.1 KV ±10% ASTM D149 耐電壓 Dielectric Breakdown Voltage (DC) 5.1 6.1 3.1 4.1 KV ±10% ASTM D149 熱阻抗 Thermal Impedance@10psi 0.78 0.87 0.76 1.6 C-in²/W - ASTM D5470 熱阻抗 Thermal Impedance@30psi 0.75 0.81 0.70 1.1 C-in²/W - ASTM D5470 熱阻抗 Thermal Impedance@50psi 0.73 0.79 0.63 1.07 C-in²/W - ASTM D5470 耐燃等級 Flame Rating V-0 - - UL94 可依需求沖型裁切 Pre-cut for different shapes 可製成捲料 Roll type is available 6

導熱膠帶 Thermal Tape Li000/Li000A 導熱膠帶 Thermal Tape REACH Compliant RoHS Compliant UL Compliant 以矽膠為基底 Silicone PSA 良好的黏著性 Good adhesive 長時間耐溫高達 170 C Long time use temperature of 170 C 高電氣絕緣 Electrical insulation 保存方式 Storage 建議保存於 5 以下之環境, 並於 6 個月內使用完畢, 以保持膠帶及離型紙具適當的黏合度 T-global guarantees a 6 month shelf life at maximum continuous storage. Storage temperature should under 5 to maintain controlled adhesion to the liner. 導熱係數 Thermal Conductivity : 1.3(Li000) /.1(Li000A) W/mK 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 Li000 Li000A Properties Li000 Li000A Unit Tolerance Test Method 導熱係數 Thermal Conductivity 1.3 1.3.1 W/mK ±0.1 ASTM D5470 厚度 Thickness 0.15 0.5 0. mm - ASTM D374 顏色 Color 白 White - - 目視 Visual 補強材 Reinforcement Carrier Fiberglass Mesh - - - - 工作溫度 Continuous Working Temperature -45~170 C - - 短期耐溫 Short time use temperature (30sec) 88 88 60 C - - 密度 Density 1.6 1.6.3 g/cm³ - ASTM D79 初期黏性 Initial Tack 10 10 >30 C - PSTC-6 剪切強度 Lap Shear Strength 74 76 35 cm - ASTM D100 晶片抗切強度 Die Shear Strength@5 C 113 16 60 N/cm² - - 晶片抗切強度 Die Shear Strength@80 C 80 85 50 N/cm² - - 晶片抗切強度 Die Shear Strength@150 C 30 35 40 N/cm² - - 保持力 Holding Power 1000g@5 Cusing 1 in >40000 min - PSTC-7 保持力 Holding Power 1000g@80 Cusing 1 in >40000 min - PSTC-7 保持力 Holding Power 1000g@150 Cusing 1 in >10000 min - PSTC-7 抗拉強度 Tensile strength 450 650 - psi - ASTM D41 耐電壓 Dielectric Breakdown Voltage (AC) 3.1 3.6 KV ±10% ASTM D149 耐電壓 Dielectric Breakdown Voltage (DC) 3.1 4.1 4.6 KV ±10% ASTM D149 體積阻抗 Volume Resistance >10¹² >10¹² >10⁹ Ohm-m - ASTM D57 熱阻抗 Thermal Impedance@10psi 0.68 1.13 0.69 C-in²/W - ASTM D5470 熱阻抗 Thermal Impedance@30psi 0.66 1.10 0.53 C-in²/W - ASTM D5470 熱阻抗 Thermal Impedance@50psi 0.61 1.04 0.49 C-in²/W - ASTM D5470 耐燃等級 Flame Rating V-0 - - UL94 可依需求沖型裁切 Pre-cut for different shapes 可製成捲料 Roll type is available 7

導熱膏 Thermal Grease TG-S808 導熱膏 Thermal Grease REACH Compliant RoHS Compliant 高熱傳導係數 High thermal conductivity 流平性佳 & 不溢流 Good leveling agent & No overflow 有效填補表面不平整處 Effectively fill the gap of the interface 低熱阻抗 / 低熱阻 Low thermal impedance / thermal resistance 有機矽基材無環境污染 Silicone base, No environmental pollution 保存方式 Storage 導熱膏在其未開封之狀態, 於室溫 5 C 以下可保存 18 個月. Thermal grease has a shelf-life of eighteen (18) months from the date of manufacture, as indicated by the lot number, when stored in the original, unopened contained at, or below 5 C. 導熱係數 Thermal Conductivity : 8 W/mK 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 Properties TG-S808 Unit Tolerance Test Method 導熱係數 Thermal Conductivity 8 W/mK ±10% ASTM D5470 顏色 Color 灰 Gray - - 目視 Visual 油分離度 Oil Dispersible <0.1 wt% - 4hr @150 C 重量損失 Weight Loss <0.1 wt% - ASTM E595 密度 Density 3. g/cm³ ±10% ASTM D79 工作溫度 Working Temperature -40~+00 C - - 體積阻抗 Volume Resistance >10¹³ Ohm-m - ASTM D57 標準規格 Standard Format 1kg Pot - - 使用前若發現有油層分離現象, 乃為散熱膏正常之撓變性現象, 僅需攪拌均勻後, 即恢復正常使用 應避免灰塵或雜質附著於散熱膏上, 導致熱阻增加而降低散熱效果 開封後最適保存環境 : 恆溫冷藏, 溫度範圍 +5 ~+15 建議半年內使用完畢 If an oil layer is occurs on the top of the thermal grease, it belongs to a normal situation. We suggest stir it evenly before usage. Please avoid any dust or impurity adheres to thermal grease. This will increase the thermal resistance and reduce the heat dissipation effect. Condition of storage once opened: Constant temperature or cold storage, temperature between +5 ~+15. Please finish it within six months. 8

導熱膏 Thermal Grease S606 系列導熱膏 Thermal Grease REACH Compliant RoHS Compliant 良好的導熱性 Good thermal conductivity 容易施工 Easy to assemble 高穩定性 High stability 保存方式 Storage 導熱膏在其未開封之狀態, 於室溫 5 C 以下可保存 18 個月. Thermal grease has a shelf-life of eighteen (18) months from the date of manufacture, as indicated by the lot number, when stored in the original, unopened contained at, or below 5 C. 導熱係數 Thermal Conductivity : 1.9(S606B) / 5.3(S606C) W/mK 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 S606B S606C Properties S606B S606C Unit Tolerance Test Method 導熱係數 Thermal Conductivity 1.9 5.3 W/mK ±10% ASTM D5470 顏色 Color 白 White 灰 Gray - - 目視 Visual 油分離度 Oil Dispersible <0. <0.05 % - 4hr @150 C 重量損失 Weight Loss <0.5 % - ASTM E595 密度 Density.3 g/cm³ ±10% ASTM D79 工作溫度 Working Temperature -40~+180 C - - 黏度 Viscosity 30 15 Pa s - ASTM D196 體積阻抗 Volume Resistance >10¹¹ >10¹² Ohm-m - ASTM D57 標準規格 Standard Format 1kg 1kg Pot - - 使用前若發現有油層分離現象, 乃為散熱膏正常之撓變性現象, 僅需攪拌均勻後, 即恢復正常使用 應避免灰塵或雜質附著於散熱膏上, 導致熱阻增加而降低散熱效果 開封後最適保存環境 : 恆溫冷藏, 溫度範圍 +5 ~+15 建議半年內使用完畢 If an oil layer is occurs on the top of the thermal grease, it belongs to a normal situation. We suggest stir it evenly before usage. Please avoid any dust or impurity adheres to thermal grease. This will increase the thermal resistance and reduce the heat dissipation effect. Condition of storage once opened: Constant temperature or cold storage, temperature between +5 ~+15. Please finish it within six months. 9

導熱膠泥 Thermal Putty TG Putty 系列導熱膠泥 Thermal Putty REACH Compliant RoHS Compliant UL Compliant 長期可靠度優異的含矽型導熱膠 Silicone-type spacer with great long term reliability 較導熱片低的接觸熱阻 Lower thermal resistance than thermal pads 介於液態和固態的物理特性, 擁有非常低的熱阻抗 Physical property between liquid and solid state 對應產品內高低不平的熱源 Elimination of different heat source gap & heat sink 可使用點膠機設備作業 Can be applied with dispenser 操作說明 Operation Manual INSERT TWIST TAKE OFF PUSH 1 Push the latch and insert the stick. Put the tube in and twist. 3 Close the cover. 4 Take off the plug. 可靠度 Reliability ( 熱阻抗 Thermal Impendence) TG4040 Putty TG6060 Putty Time Initial 00 Hr 400 Hr 700 Hr 1000 Hr Initial 00 Hr 400 Hr 700 Hr 1000 Hr 15 C Aging 0.058 0.059 0.060 0.059 0.060 0.05 0.051 0.050 0.05 0.05 160 C Aging 0.058 0.059 0.060 0.060 0.059 0.05 0.05 0.051 0.05 0.051 85 C / 85% RH 0.058 0.059 0.060 0.059 0.060 0.05 0.051 0.050 0.05 0.051 導熱係數 Thermal Conductivity : 3.(TG4040 Putty) / 6.3(TG6060 Putty) W/mK 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 TG4040 Putty TG6060 Putty Properties TG4040 Putty TG6060 Putty Unit Tolerance Test Method 導熱係數 Thermal Conductivity 3. 6.3 W/mK ±0.3 ASTM D5470 顏色 Color 藍 Blue - - 目視 Visual 固體含量 Solid Content 100(one-part) % - - 黏度 Viscosity @0.5rpm 3000 500~3000 Pa s - Brookfield 密度 Density 3 3.3 g/cm³ - ASTM D79 體積電阻率 Volume Resistivity 10¹³ Ohm-m - ASTM D57 工作溫度 Working Temperature -50~+180 C - - 標準規格 Standard Format 90g/165g/1kg 90g/181g/1kg Tube/Pot - - 30

導熱封膠 Potting Compound A96AB 導熱封膠 Epoxy Potting Compound REACH Compliant RoHS Compliant 環氧樹脂材料, 高硬度可用於支撐 Epoxy based material with high hardness for support 固化後保護電子元件防止受外界環境影響 Protect components from any effect after curing 可用點膠機灌注 Can be applied with dispenser 室溫或加熱熟化 Room temperature or heating curing 保存方式 Storage 導熱封膠其在未開封之狀態, 在室溫 5 C 以下可保存 1 個月 Epoxy Potting Compound has a shelf-life of twelve (1) months from the date of manufacture, as indicated by the lot number, when stored in the original, unopened contained at or below 5 C. 操作說明 Operation Manual 1 Mix component A and B. Vacuum out air. 3 Pour potting compound. 導熱係數 Thermal Conductivity :.6 W/mK 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 硬度 Hardness : 68 (Shore A) 0 5 10 15 0 5 30 40 80 Properties A96AB Unit Tolerance Test Method 導熱係數 Thermal Conductivity.6 W/mK ±0.5 ASTM D5470 顏色 Color 白 White/ 黑 Black - - 目視 Visual 耐電壓 Dielectric Breakdown Voltage 10. KV/mm ±1 ASTM D149 重量損失 Weight Loss <1 % - ASTM E595 密度 Density 1.8 g/cm³ ±0. ASTM D79 工作溫度 Working Temperature -5~+150 C - - 黏度 Viscosity 1800~500 cps - ASTM D393 固化時間 Curing Time @5 C 35 Hrs - - 固化時間 Curing Time @80 C 1.5 Hrs - - 標準規格 Standard Format 1kg Pot - - 硬度 Hardness 68 Shore A ±8 ASTM D40 混合比例 Mixing Ratio 13:1 gram - - A 劑為 epoxy 與導熱粉混合材料, 因密度不同會造成沉澱分層, 屬正常現象, 使用前請用扁平刮刀或是其他不鏽鋼工具, 均勻攪拌 A 劑, 以獲得最好的導熱效果 Component A is a mixed material of epoxy and thermal conductive powder. It is normal to cause precipitation and stratification due to different density. Before use, please use a flat spatula or other stainless tools to evenly mix component A to achieve the best thermal conductivity. 31

導熱封膠 Potting Compound S730 導熱封膠 Silicone Potting Compound REACH Compliant RoHS Compliant 良好的導熱效能 Good thermal conductivity 加熱熟化 Heat curing 一比一比例易於混合 A:B = 1:1; Easy to mix 可搭配擠出槍方便作業, 容易施工 Can be applied with pistol & Easy to assemble 低黏度 Low viscosity 保存方式 Storage 導熱封膠其在未開封之狀態, 在室溫 5 C 以下可保存 1 個月 Epoxy Potting Compound has a shelf-life of twelve (1) months from the date of manufacture, as indicated by the lot number, when stored in the original, unopened contained at or below 5 C. 操作說明 Operation Manual INSERT PUT PUSH 1 Push the latch and insert the stick. Put the tube in. 3 Close the cover. 導熱係數 Thermal Conductivity :.1 W/mK 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 硬度 Hardness : 17 (Shore A) 0 5 10 15 0 5 30 40 80 Properties S730 Unit Tolerance Test Method 導熱係數 Thermal Conductivity.1 W/mK ±10% ASTM D5470 顏色 Color 灰 Gray - - 目視 Visual 耐電壓 Dielectric Breakdown Voltage 1. KV/mm ±10% ASTM D149 體積阻抗 Volume Resistance >10¹³ Ohm-m - ASTM D57 密度 Density.5 g/cm³ ±10% ASTM D79 工作溫度 Working Temperature -50~+00 C - - 黏度 Viscosity <50000 cps - ASTM D393 固化時間 Curing Time @5 C 300 Min - - 固化時間 Curing Time @60 C 30 Min - - 固化時間 Curing Time @100 C 5 Min - - 標準規格 Standard Format 100g/1kg Tube/Pot - - 硬度 Hardness 17 Shore A ± ASTM D40 混合比例 Mixing Ratio 1:1 gram - - A 劑為 epoxy 與導熱粉混合材料, 因密度不同會造成沉澱分層, 屬正常現象, 使用前請用扁平刮刀或是其他不鏽鋼工具, 均勻攪拌 A 劑, 以獲得最好的導熱效果 Component A is a mixed material of epoxy and thermal conductive powder. It is normal to cause precipitation and stratification due to different density. Before use, please use a flat spatula or other stainless tools to evenly mix component A to achieve the best thermal conductivity. 3

導熱封膠 Potting Compound S70AB 導熱封膠 Silicone Potting Compound REACH Compliant RoHS Compliant 良好的導熱效能 Good thermal conductivity 室溫熟化 Room temperature 高穩定性 High stability 防水氣 / 電子灌注封裝 Water proof 保存方式 Storage 導熱封膠其在未開封之狀態, 在室溫 5 C 以下可保存 1 個月 Epoxy Potting Compound has a shelf-life of twelve (1) months from the date of manufacture, as indicated by the lot number, when stored in the original, unopened contained at or below 5 C. 操作說明 Operation Manual 1 Mix component A and B. Vacuum out air. 3 Pour potting compound. 導熱係數 Thermal Conductivity : 0.8 W/mK 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 硬度 Hardness : 34~43 (Shore A) 0 5 10 15 0 5 30 40 80 ~ Properties S70AB Unit Tolerance Test Method 導熱係數 Thermal Conductivity 0.8 W/mK ±10% ASTM D5470 顏色 Color 白 White - - 目視 Visual 耐電壓 Dielectric Breakdown Voltage 6.1 KV/mm ±10% ASTM D149 重量損失 Weight Loss <1 % - ASTM E595 密度 Density 1.97 g/cm³ ±10% ASTM D79 工作溫度 Working Temperature -40~+180 C - - 黏度 Viscosity 000~3000 cps - ASTM D393 固化時間 Curing Time @5 C 35 Hrs - - 標準規格 Standard Format 1kg Pot - - 硬度 Hardness 34~43 Shore A ±4~5 ASTM D40 混合比例 Mixing Ratio 100: gram - - A 劑為 epoxy 與導熱粉混合材料, 因密度不同會造成沉澱分層, 屬正常現象, 使用前請用扁平刮刀或是其他不鏽鋼工具, 均勻攪拌 A 劑, 以獲得最好的導熱效果 Component A is a mixed material of epoxy and thermal conductive powder. It is normal to cause precipitation and stratification due to different density. Before use, please use a flat spatula or other stainless tools to evenly mix component A to achieve the best thermal conductivity. 33

非矽型導熱材料 Non-silicone Thermal Materials PC93 非矽型導熱材料 Non-silicone Thermal Pad REACH Compliant RoHS Compliant UL Compliant 無低分子矽氧烷及矽油揮發 Non siloxane and oil-bleed 材料柔軟且延展性好 Ultra soft and great elongation 電氣絕緣 Electrical insulation 低熱阻抗 Very low thermal impedance 適用於易有矽油問題的產品 Applications that require no silicone 熱阻抗 VS. 壓力 VS. 變形量示意圖 Thermal Resistance VS. Pressure VS. Deflection Pressure(psi) R( C-in²/W) Deflection(%) 10 1.01 3 30 0.95 43 50 0.74 5 導熱係數 Thermal Conductivity :.1 W/mK 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 硬度 Hardness : 55 (Shore 00) 0 5 10 15 0 5 30 40 80 Properties PC93 Unit Tolerance Test Method 導熱係數 Thermal Conductivity.1 W/mK ±10% ASTM D5470 厚度 Thickness 0.5~5.0 mm - ASTM D374 0.0197~0.1969 inch - ASTM D374 顏色 Color 灰 Gray - - 目視 Visual 耐燃等級 Flame Rating V-0 - - UL 94 耐電壓 Dielectric Breakdown Voltage 10. KV/mm ±1 ASTM D149 重量損失 Weight Loss <1 % - ASTM E595 密度 Density.1 g/cm³ ±0. ASTM D79 工作溫度 Working Temperature -30~+15 C - - 體積阻抗 Volume Resistance >10¹⁰ Ohm-m - ASTM D57 延展率 Elongation 350 % - ASTM D41 抗拉強度 Tensile Strength 1 kgf/cm² ASTM D41 標準規格 Standard Format 單片狀 Sheets one - - - 硬度 Hardness 55 Shore 00 ±10 ASTM D40 可依需求沖型裁切 Pre-cut for different shapes 34

非矽型導熱材料 Non-silicone Thermal Materials PC94 非矽型導熱材料 Non-silicone Thermal Pad REACH Compliant RoHS Compliant UL Compliant 無低分子矽氧烷及矽油揮發 Non siloxane and oil-bleed 材料柔軟且延展性好 Ultra soft and great elongation 電氣絕緣 Electrical insulation 低熱阻抗 Very low thermal impedance 適用於易有矽油問題的產品 Applications that require no silicone 熱阻抗 VS. 壓力 VS. 變形量示意圖 Thermal Resistance VS. Pressure VS. Deflection Pressure(psi) R( C-in²/W) Deflection(%) 10 0.75 3 30 0.64 34 50 0.31 43 導熱係數 Thermal Conductivity : 4. W/mK 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 硬度 Hardness : 50 (Shore 00) 0 5 10 15 0 5 30 40 80 Properties PC94 Unit Tolerance Test Method 導熱係數 Thermal Conductivity 4. W/mK ±10% ASTM D5470 厚度 Thickness 0.5~5.0 mm - ASTM D374 0.0197~0.1969 inch - ASTM D374 顏色 Color 紅 Red - - 目視 Visual 耐燃等級 Flame Rating V-0 - - UL 94 耐電壓 Dielectric Breakdown Voltage 10. KV/mm - ASTM D149 重量損失 Weight Loss <1 % - ASTM E595 密度 Density.5 g/cm³ ±0. ASTM D79 工作溫度 Working Temperature -30~+15 C - - 體積阻抗 Volume Resistance >10¹⁰ Ohm-m - ASTM D57 延展率 Elongation 100 % - ASTM D41 抗拉強度 Tensile Strength kgf/cm² ASTM D41 標準規格 Standard Format 單片狀 Sheets one - - - 硬度 Hardness 50 Shore 00 ±10 ASTM D40 可依需求沖型裁切 Pre-cut for different shapes 35

非矽型導熱材料 Non-silicone Thermal Materials TG-N909 非矽型導熱膏 Non-silicone Thermal Grease RoHS Compliant 高熱傳導係數 High thermal conductivity 無添加矽油 Silicone oil free 不溢流 No overflow 低熱阻抗 / 低熱阻 Low thermal impedance / thermal resistance 無矽基材環境污染 Non-silicone base, No environmental pollution 保存方式 Storage 導熱膏在其未開封之狀態, 於室溫 5 C 以下可保存 18 個月 Thermal grease has a shelf-life of eighteen (18) months from the date of manufacture, as indicated by the lot number, when stored in the original, unopened contained at, or below 5 C. 導熱係數 Thermal Conductivity : 9 W/mK 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 Properties TG-N909 Unit Tolerance Test Method 導熱係數 Thermal Conductivity 9 W/mK ±10% ASTM D5470 顏色 Color 灰 Gray - - 目視 Visual 油分離度 Oil Dispersible <0.1 wt% - 4hr @150 C 重量損失 Weight Loss <0.1 wt% - ASTM E595 密度 Density 3.3 g/cm³ ±10% ASTM D79 工作溫度 Working Temperature -40~+00 C - - 體積阻抗 Volume Resistance >10¹³ Ohm-m - ASTM D57 標準規格 Standard Format 1kg Pot - - 使用前若發現有油層分離現象, 乃為散熱膏正常之撓變性現象, 僅需攪拌均勻後, 即恢復正常使用 應避免灰塵或雜質附著於散熱膏上, 導致熱阻增加而降低散熱效果 開封後最適保存環境 : 恆溫冷藏, 溫度範圍 +5 ~+15 建議半年內使用完畢 If an oil layer is occurs on the top of the thermal grease, it belongs to a normal situation. We suggest stir it evenly before usage. Please avoid any dust or impurity adheres to thermal grease. This will increase the thermal resistance and reduce the heat dissipation effect. Condition of storage once opened: Constant temperature or cold storage, temperature between +5 ~+15. Please finish it within six months. 36

非矽型導熱材料 Non-silicone Thermal Materials TG-NSP5 非矽型導熱膠泥 Non-silicone Thermal Putty RoHS Compliant 無矽成分的導熱凝膠 Silicone free thermal gel 可任意塑形與下壓 Shapeable and compressible 低熱阻 Low thermal resistance 無液體流動現象之困擾 No fluidity 使用在 IC 北橋非常好的材料 Best for north bridge IC 使用在 IC 北橋非常好的材料 Best for north bridge IC 操作說明 Operation Manual INSERT TWIST TAKE OFF PUSH 1 Push the latch and insert the stick. Put the tube in and twist. 3 Close the cover. 4 Take off the plug. 可靠度 Reliability ( 熱阻抗 Thermal Impendence) TG-NSP5 Time Initial 00 Hr 400 Hr 700 Hr 1000 Hr 15 C Aging 0.050 0.051 0.050 0.051 0.05 85 C / 85% RH 0.050 0.049 0.049 0.049 0.050 導熱係數 Thermal Conductivity :.6 W/mK 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 Properties TG-NSP5 Unit Tolerance Test Method 導熱係數 Thermal Conductivity.6 W/mK ±10% ASTM D5470 顏色 Color 灰 Gray - - 目視 Visual 固體含量 Solid Content 100 % - - 黏度 Viscosity @0.5rpm 5000 Pa s - Brookfield 密度 Density.6 g/cm³ - ASTM D79 低分子矽氧烷 Low MW Siloxane (D3-10) 0 ppm - GC/MS 體積電阻率 Volume Resistivity 10¹⁴ Ohm-m - ASTM D57 工作溫度 Working Temperature -50~+150 C - - 標準規格 Standard Format 78g/143g/1kg Tube/Pot - - 37

導熱絕緣帽套 Thermal Insulation Rubber Cap CP 系列導熱絕緣帽套 Thermal Insulation Rubber Cap 低熱阻抗與緩衝效果 Low thermal contact resistance and buffer effect 高絕緣性 Good electrical insulation 降低產品重量 Decrease the weight of the product 簡易安裝組件 Easy to assemble 尺寸選擇 Standard Sizes (mm) 1. CP TO-0: 11.4x16x5.8 3. CP33 TO-47: 17.5x8.5x5.8. CP3 TO-0: 11.4x1.5x5.8 熱阻抗 VS. 壓力 VS. 變形量示意圖 Thermal Resistance VS. Pressure VS. Deflection Pressure(psi) R( C-in²/W) Deflection(%) 10 1.13 9 0 1.07 14 50 0.97 9 導熱係數 Thermal Conductivity : W/mK 硬度 Hardness : 65 (Shore A) 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 0 5 10 15 0 5 30 40 80 Properties CP/CP3/CP33 Unit Tolerance Test Method 導熱係數 Thermal Conductivity W/mK ±10% ASTM D5470 厚度 Thickness 0.3/0.45 mm - ASTM D374 顏色 Color 灰 Gray - - 目視 Visual 材料 Material Silicone - - - 工作溫度 Continuous Working Temperature -45~+180 C - - 密度 Density.55 g/cm³ - ASTM D79 耐電壓 Dielectric Breakdown Voltage (AC) 4.1/6.1 KV ±10% ASTM D149 耐電壓 Dielectric Breakdown Voltage (DC) 6.1/8.1 KV ±10% ASTM D149 介電係數 Dielectric Constant 5.8 1000Hz - ASTM D150 熱阻抗 Thermal Impedance@10psi 1.13 C-in² / W ASTM D5470 熱阻抗 Thermal Impedance@0psi 1.07 C-in² / W - ASTM D5470 熱阻抗 Thermal Impedance@50psi 0.97 C-in² / W - ASTM D5470 硬度 Hardness 65 Shore A ±7 ASTM D40 38

石墨片 石墨烯 Graphite Sheet, Graphene T6 天然石墨 Natural Graphite Sheet REACH Compliant RoHS Compliant 超高導熱效能 Ultra high thermal conductivity 容易施工 Easy to assemble 體積輕薄, 減低安裝空間 Low mass decreases space 降低電磁干擾 EMI reduction 適用需平面均溫的產品 Suitable for products requiring flat temperature Properties T6 T6-1 T6- Unit Tolerance Test Method 導熱係數 Thermal Conductivity (XY axis) 400 W/mK - AC calorimeter 導熱係數 Thermal Conductivity (Z axis) 0 15 5 W/mK ±10% Laser flash 厚度 Thickness 0.13 0.16 0. mm ±0.03 Micrometer 0.0051 0.0063 0.0079 inch - - 顏色 Color 黑 Black - - 目視 Visual PET Graphite 結構 Structure Graphite Graphite - - - Adhesive Adhesive 密度 Density 1.5 1.5~1.8 g/cm³ ±0.05 ASTM D79 石墨含量 Graphite Contained >98 % - - 工作溫度 Working Temperature -30~+100 C - - 可依需求沖型裁切 Pre-cut for different shapes 可依需求背膠 Available to apply adhesive 尚有其它厚度, 請洽產品顧問 Other thickness is available, please contact product consultant 39

石墨片 石墨烯 Graphite Sheet, Graphene T68 人造石墨 Natural Graphite Sheet REACH Compliant RoHS Compliant UL Compliant 具有高效導熱性 導電性及 EMI 遮蔽效果 Ultra high thermal conductivity, electrical conductivity and EMI 具可撓性, 可彎曲 Flexible, and bendable 超薄 重量輕 無毒環保 Ultra thin, Low mass, Environmental friendly 適用需平面均溫的產品 Suitable for products requiring flat temperature Properties T68 Unit Tolerance Test Method 導熱係數 Thermal Conductivity (XY axis) 1500 W/mK ±100 AC calorimeter 導熱係數 Thermal Conductivity (Z axis) 5 W/mK ±10% Laser flash 厚度 Thickness 5 μm - Micrometer 顏色 Color 黑 Black - - 目視 Visual 耐燃等級 Flame Rating V-0 - - UL 94 熱擴散率 Thermal Diffusivity 8.5 cm²/s ±0.5 AC calorimeter 密度 Density.1 g/cm³ ±0.1 Archimedes law 導電率 Electrical Conductivity >13000 S/cm - JIS K7194 彎曲測試 Bending Test 10000 times - - 工作溫度 Working Temperature -40~+400 C - AC calorimeter 熱容量 Heat Capacity (SHC) 0.895 J/g-K - Properties T68 T68A T68AP T68APF 加工方式 Processing No processing With insulating double-sided adhesive tapeunderneath (10μm/30μm) 1. Standard PET tape on thetop (10μm/30μm). Insulating -sided adhesive tape on the bottom (10μm/30μm) 1. Standard PET tape on thetop (10μm/30μm). Insulating -sided adhesive tape on the bottom (10μm/30μm) 3. Edge banding 結構 Structure Graphite Sheet Graphite Sheet -sided adhesive tape Release paper PET Tape Graphite Sheet -sided adhesive tape Release paper PET Tape Graphite Sheet -sided adhesive tape Release paper 特徵 Feature 發揮其熱傳導 柔軟性 單面具有絕緣黏合性 產品表面 黏合面均具有 產品表面 黏合面均具有 Great thermal conductivity Insulating and adhesiveon 絕緣性絕緣性 and softness of graphite one side All surfaces are All surfaces are 低熱電阻 保證黏貼在箱體 底盤上的 electricallyisolating electricallyisolating Low thermal resistance 強黏力 PET 膠帶耐電壓 1KV PET 膠帶耐電壓 1KV 最高可在 400 Great adhesion, stickclosely PET Tape: 1KV PET Tape: 1KV Can work under 400 to the case 雙面膠帶耐電壓 1KV 雙面膠帶耐電壓 1KV 導電性 耐電壓 1KV -sided adhesive tape: 1KV -sided adhesive tape: 1KV Electrically conductive Breakdown voltage: 1KV 耐熱溫度 Heat-resistant Temperature 400 100 80~100 80~100 總厚度 Total Thickness 5μm 35μm/55μm 45μm/85μm 45μm/85μm 可依需求沖型裁切 Pre-cut for different shapes 可依需求背膠 Available to apply adhesive 40

石墨片 石墨烯 Graphite Sheet, Graphene TG-P100 系列石墨烯均溫片 Graphene RoHS Compliant 超薄 重量輕 Ultra thin, Low mass 適用於不通風環境 Available for unventilated design 無剝離及掉粉問題 No dusting issue 適用需平面均溫的產品 Suitable for products requiring flat temperature Properties TG-P10050 TG-P10090 Unit Tolerance Test Method 導熱係數 Thermal Conductivity (XY axis) 1500~1800 W/mK - AC calorimeter 導熱係數 Thermal Conductivity (Z axis) 1 W/mK - Laser flash 材料總厚度 Total Thickness 50 90 μm - 厚薄規 Meter 銅箔厚度 Copper Foil Thickness 35 75 μm - 厚薄規 Meter 塗層厚度 Coating Thickness 15 15 μm - 厚薄規 Meter 電阻 Vertical Resistivity (XY axis).57 KV/mm - QJ153-1988 電阻 Parallel Resistivity (Z axis) 0.66 KV/mm - QJ153-1988 百格測試 Cross-cut Tape Test 4B - - ASTM D3359B 鉛筆硬度測試 Pencil Hardness Test H - - ASTM D3363 耐溶劑測試 ( 酒精 ) Solvent Resistance (Alcohol) Pass(5 times) C - ASTM D540 橡皮耐磨測試 Rubber Abrasive Test Pass(150 times) Ohm-m - ASTM D7835 高溫高濕測試 High Temperature & Humidity Test @85 C/85%RH Pass(500hrs) - - IEC-60068--78 熱衝擊測試 Thermal Shock Test @-0~+80 C Pass(500cycles) - - IEC-60068--14 適用溫度範圍 Temperature Range of Utility -0~+10 C - ISO 16750-4 可依需求沖型裁切 Pre-cut for different shapes 41

相變化材料 Phase Change Materials TG-V 系列相變化材料 Thermal Phase Change Materials REACH Compliant RoHS Compliant 藉由材料熱溶後的良好流動性, 完整填充表面不平整縫隙 With the good flow ability over phase change temperature, surface irregularities can be well filled 低熱阻抗 Low thermal impedance 導熱係數 Thermal Conductivity : 3.3(TG-V833) / 3.8(TG-V838) W/mK 0 0.8 1. 1.4 1.6 1.7 1.8. 3. 3.6 4.0 4.5 5.0 15 0 TG-V833 TG-V838 Properties TG-V833 TG-V838 Unit Tolerance Test Method 導熱係數 Thermal Conductivity 3.3 3.8 W/mK ±10% ASTM D5470 厚度 Thickness 0.13/0./0.3 mm - ASTM D374 0.005/0.008/0.0118 inch - ASTM D374 顏色 Color 灰 Gray - - 目視 Visual 軟化溫度 Phase Transition Temperature 50 C - - 擊穿電壓 Breakdown voltage(ac) 1 KV - ASTM D149 密度 Density 3.4.5 g/cm³ ±0.3 ASTM D79 工作溫度 Continuous Working Temperature -40~+15 C - - 體積阻抗 Volume Resistance 3 10¹¹ 3 10¹⁰ Ohm-m - ASTM D57 熱阻抗 Thermal Impedance@50psi 0.0143 0.013 C-cm²/W - Modified ASTM D5470 介電常數 Dielectric Constant @1KHz 13.3 - - ASTM D41 可依需求沖型裁切 Pre-cut for different shapes 4

複合式材料 Thermal Composite Materials Ti900 超薄導熱絕緣材料 Thermal Insulator REACH Compliant RoHS Compliant UL Compliant 電氣絕緣 Insulation strength 低熱阻 Low thermal resistance 容易施工 Easy to assemble 熱阻抗 VS. 壓力 VS. 變形量示意圖 Thermal Resistance VS. Pressure VS. Deflection Pressure(psi) R( C-in²/W) Deflection(%) 10 0.8 1 30 0.49 34 50 0.39 41 Properties Ti900 Unit Tolerance Test Method 導熱係數 Thermal Conductivity 1.9 W/mK ±10% ASTM D5470 厚度 Thickness 0.1 mm - ASTM D374 顏色 Color 灰 Gray - - 目視 Visual 基材 Base Polyimide - - - 耐電壓 Dielectric Breakdown Voltage (AC) 6.1 KV ±10% ASTM D149 體積阻抗 Volume Resistance >10¹² Ohm-m - ASTM D57 工作溫度 Continuous Working Temperature -50~+180 C - - 抗拉強度 Tensile Strength 5000 psi - ASTM D41 延展率 Elongation 40 % - ASTM D41 耐燃等級 Flame Rating V-0 - - UL94 標準規格 Standard Format 單片狀 Sheets one - - - 可依需求沖型裁切 Pre-cut for different shapes 43

複合式材料 Thermal Composite Materials PH3 導熱複合材料 Heat Spreader REACH Compliant RoHS Compliant 優良熱輻射 Excellent thermal radiation 超薄且具可彎曲性 Thin&bendable 無剝離及掉粉問題 No dusting issue 適用於不通風環境 Available for unventilated design Properties PH3 Unit Tolerance Test Method 金屬層導熱係數 Metal Layer Thermal Conductivity 400 W/mK - ASTM D5470 塗佈層導熱係數 Coating Layer Thermal Conductivity 1.3 W/mK - ASTM D5470 總厚度 Total Thickness 0.06 0.11 0.1 mm ±10% ASTM D374 金屬層厚度 Metal Layer Thickness 0.01 0.05 0.1 mm ±10% ASTM D374 塗佈層厚度 Coating Layer Thickness 0.048 0.06 0.11 mm ±10% ASTM D374 顏色 Color 黑 Black - - 目視 Visual Matal Layer: Cu Foil 結構 Structure Coating Layer: High Thermal Radiation - - - Nano-carbon Tube 體積阻抗 Surface Resistance 10¹² Ohm-m - - 工作溫度 Continuous Working Temperature -30~+10 C - - 初期黏性 Initial Tack 18 15 11 cm - PSTC-6 剝離強度 30 Peeling Strength (aluminum) 8 10 1 N/in - ASTM D3330 擊穿電壓 Breakdown Voltage(AC) 3.1 KV - ASTM D149 擊穿電壓 Breakdown Voltage(DC) 3.1 3.1 4.1 KV - ASTM D149 耐燃等級 Flame Rating V- - - UL94 可依需求背膠 Available to apply adhesive 44

金屬散熱片 Heat Sink 散熱片 Heat Sink 可客製裁切長度 後加工 長度可客製 散熱片 (Heat Sink) 為導熱性佳 質輕 易加工之金屬 ( 多為鋁或銅 ), 可貼附於發熱元件表面, 是目前作為電子散熱最普遍的產品之一 如何提 高散熱片的熱傳導率與散熱面積, 以提升整體機構散熱效率, 更是目前相關產業所面臨的重要課題 散熱片製造方式分為沖壓 擠型 壓鑄 鍛造, 這些成品可以做為散熱主要元件 機構件使用, 有些則是肩負機構外殼及散熱之雙重任務 Heat sink (mainly made of aluminum or copper) is a kind of metal contain high thermal dissipation ability, light weight and easy to have machining. It is one of the popular heat dissipation products and can stick on the surface of heat source. How to increase the thermal conductivity and heat dissipation surface in order to increase the product s heat dissipation efficiency is the hard issue of this industry. Stamping, extrusion, die casting and forging are the production way of heat sink. These products and be the main components of heat dissipation for various applications and their application shell. 規格皆為寬 長 高 此為既有模具公規 TGH-0075-01 7.5 7.5 10mm 1g 洗淨 TGH-0100-01 10 10 9.5mm 1.5g 洗淨 TGH-014-01 1.4 1.4 13mm 3g 陽極黑色 TGH-0130-01 13 13 6mm g 洗淨 TGH-0130-0 13 13 9mm g 陽極黑色 TGH-0130-03 13 35 6mm 4g 陽極黑色 TGH-013-01 13. 19 9.7mm 1.5g 陽極黑色 AL1050 TGH-0137-0 13.7 5.6 1mm g 陽極黑色 AL1050 TGH-0160-01 16 16 11mm 3g 洗淨 TGH-0164-01 16.4 16 10mm 3g 陽極黑色 TGH-0170-01 17 17 9.5mm 3g 陽極黑色 TGH-0190-01 19 19 5mm 3g 陽極黑色 45

46 Heat Sink 金屬散熱片 Heat Sink 散熱片 規格皆為寬 長 高 此為既有模具公規 TGH-000-0 0 0 6mm 4g 陽極黑色 TGH-010-01 1 5 3.5mm 3g 陽極本色 TGH-00-06 7 9mm 6g 陽極黑色 TGH-080-01 8 0 4.5mm 4g 陽極黑色 TGH-080-06 8 8 1.7mm 1g 陽極黑色 TGH-000-03 0 0 9.5mm 4g 陽極本色 TGH-00-0 15 11.7mm 4g 陽極黑色 TGH-00-07 45 14.5mm 3g 陽極本色 TGH-080-0 8 8 4.5mm 5g 陽極黑色 TGH-080-07 8 8 15mm 16g 陽極本色 TGH-000-05 0 33 9.5mm 8g 陽極黑色 AL1050 TGH-00-03 9mm 5g 陽極黑色 TGH-050-01 5 5 9mm 9g 陽極本色 TGH-080-04 8 8 8mm 8g 陽極黑色 TGH-080-08 8 8 mm 0g 陽極黑色 TGH-000-06 0 44 6mm 9g 洗淨 AL1050 TGH-00-04 11.7mm 7g 陽極黑色 TGH-060-0 6 6 14.8mm 10g 陽極本色 TGH-080-05 8 8 11.4mm 10g 陽極黑色 TGH-0300-01 30 30 6.6mm 6g 陽極本色

散熱片金屬散熱片 Heat Sink Heat Sink 47 規格皆為寬 長 高 此為既有模具公規 TGH-0300-03 30 30 1mm 1g 陽極金色 TGH-0350-04 35 35 0mm 30g 陽極黑色 TGH-0400-01 40 40 10mm 4g 陽極黑色 TGH-0500-01 50 50 17mm 56g 陽極本色 TGH-0550-01 55 55 6mm 3g 陽極本色 TGH-0300-04 30 30 15mm 13g 陽極本色 TGH-0380-01 38 0 9mm 10g 洗淨 TGH-0400-03 40 40 11mm 17g 陽極黑色 TGH-0510-01 51 35 5mm 17g 陽極黑色 TGH-0610-01 61 61 13mm 67g 陽極本色 TGH-035-01 3.5 3.5 7.5mm 1g 陽極黑色 TGH-0380-03 38 38 9mm 19g 陽極黑色 TGH-0400-04 40 40 0mm 6g 陽極黑色 TGH-0510-0 51 100 0mm 113g 陽極本色 TGH-0955-01 95.5 95 14.3mm 134g 陽極黑色 TGH-0350-03 35 35 15mm 4g 陽極黑色 TGH-0380-05 38 38 15mm 19g 洗淨 TGH-0450-01 40 40 10mm 7g 陽極黑色 TGH-05-01 5. 5. 3mm 74g 陽極本色 TGH-1535-01 153.5 150 34mm 906g 陽極本色

散熱片 Heat Sink 陶瓷片 Ceramic Heat Spreader XL-5 陶瓷散熱片 Ceramic Heat Spreader REACH Compliant RoHS Compliant 開放性多孔結構增加接觸空氣面積 Open-porous structure increases air contact area 適用於有限的安裝空間 Best for limited space 高耐電壓及高表面阻抗 High breakdown voltage, high resistance 低熱膨脹係數 Low thermal expansion coefficient 降低電磁干擾 EMI reduction 冷熱衝擊性佳, 可適應環境劇烈變動 High reliability 可適應環境劇烈變動 Can adapt to dramatic environmental changes 尺寸選擇 Standard Sizes (mm) 01. 10x10x.0( 平板 flat) 07. xx.5( 平板 flat) 13. 40x40x3.0( 凸點 embossed) 0. 15x15x.5( 平板 flat) 08. 30x30x.0( 平板 flat) 14. 40x40x5.0( 鰭片 fin) 03. 15x15x5.0( 鰭片 fin) 09. 30x30x.5( 平板 flat) 15. 40x40x10.0( 鰭片 fin) 04. 0x15x.0( 平板 flat) 10. 30x30x5.0( 鰭片 fin) 16. 50x50x3.0( 凸點 embossed) 05. 0x0x.0( 平板 flat) 11. 35x35x10.0( 鰭片 fin) 17. 50x50x5.0( 鰭片 fin) 06. 0x0x.5( 平板 flat) 1. 40x40x.5( 平板 flat) 18. 50x50x10.0( 鰭片 fin) 散熱機制 Mechanism Aca 5 x Aal 同體積的陶瓷散熱片的空氣接觸面積約等於五個同體積鋁質散熱器的空氣接觸面積之總和 在一樣的風速下, 陶瓷散熱片能提供更多的空氣接觸面積 當接觸面積越大, 熱能被帶走的量越大 The air-contact area of ceramic heat spreader is nearly 5 times of aluminum heat sink, when they have the same volume. In the same air flow, ceramic heat spreader can provide more air-contact area.when A is bigger, Qt would be bigger, Qt would be bigger. Ceramic Heat Spreader Heat Flow Cave Qt S x A: 散熱效能與風速及接觸面積成正比 Qt: 經由空氣接觸所帶走的熱能 TIMs IC Circuit Board S: 風速 Air flow (m/s) A: 接觸面積 Air contact area (m²) Aca: Air contact (m²) of ceramic heat sink 陶瓷散熱片的接觸面積 Aal: Air contact (m²) of aluminium heat sink 鋁散熱片的接觸面積 Properties XL-5 Unit Tolerance Test Method 導熱係數 Thermal Conductivity 10 W/mK ±0.67 - 顏色 Color 灰 Gray/ 綠 Green - - 目視 Visual 耐電壓 Dielectric Breakdown Voltage 500 Voltage - ASTM D149 體積密度 Bulk Density 1.89 g/cm³ ±0.18 CNS 619 彎曲強度 Flexural Strength 47.5 kgf/cm² - CNS 1701 孔隙度 Porosity 5 % - CNS 619 吸水率 Water absorption 16 % - CNS 619 工作溫度 Working Temperature <500 C - - 熱膨脹係數 Linear Temperature Expansion Coefficient 4.13 10 - ⁶ - RT~300 C 主要成分 Main Composition SiC/Al₂O₃/SiO₂ - - - 硬度 Hardness 5~6 Moh's ±0.6 DIN En101-199 48

陶瓷片 Ceramic Heat Spreader 散熱片 Heat Sink XL-5 系列陶瓷導熱片 Ceramic Heat Spreader 適用於有限的安裝空間 Best for limited space 低熱膨脹係數 Low thermal expansion coefficient 可靠的絕緣性能 Reliable insulation performance 低熱膨脹係數 Low thermal expansion coefficient 無毒 耐高溫 Non-toxic, High temperature resistance 冷熱衝擊性佳, 可適應環境劇烈變動 High reliability 可適應環境劇烈變動 Can adapt to dramatic environmental changes 尺寸選擇 Standard Sizes (mm) 01. TO-0 0x14x0.635 04. TO-47 x17x0.635 07. TO-64 8xx1.0 0. TO-0 0x14x1.0 05. TO-47 x17x1.0 08. TO-3P 5x0x0.635 03. TO-0 1x18.5x1.0 06. TO-64 8xx0.635 09. TO-3P 5x0x1.0 Properties XL-5W XL-5D Unit Test Method 導熱係數 Thermal Conductivity 5 190~10 W/mK - 顏色 Color 白 White 暗灰 Dark Gray - 目視 Visual 耐電壓 Dielectric Breakdown Voltage 15 18.45 KV/mm ASTM D149 體積密度 Bulk Density 3.8 3.3 g/cm³ CNS 619 體積電阻 Volume Resistance 10¹² 1.4 10¹³ Ohm-cm - 彎曲強度 Flexural Strength 4078.8 3416 kgf/cm² CNS 1701 熱膨脹係數 Linear Temperature Expansion Coefficient 6.6~8.805 10 - ⁶ RT~300 C 主要成分 Main Composition Al₂O₃ AlN - - 49

熱導管 Heat Pipe 熱導管 Heat Pipe 熱流密度變換功能 A conversion of the density of heat flow 快速均溫性 Fast heat balancing 被動元件 Passive components 重量輕 Light weighted 小至一般電子產品, 大至航太產業皆適用 Can be applied to small general purpose electronic products to large scale aerospace industry products Recommended Specifications 長度 : 100~350mm 打扁厚度 : 直徑的一半 e.x. Ø6 打扁 3mm 以上 折彎 R 角 : 大於 3 倍導管直徑 e.x. Ø6 折彎半徑大於 18mm 彎曲角度 : 大於 10 度 Length: 100~350mm Flattening thickness: half of the diameter e.x. Ø6 flattened more than 3mm Bending angle R: more than 3 times of the diameter of the heat pipe e.x. Ø6 bending radius is greater than 18mm Bending angle : greater than 10 degrees 散熱機制 Mechanism Diameter(mm) Thickness(mm) Width(mm) 5.65 Ø4.5 5.55 3 5.45 6.91.5 6.59 Ø5 3 6.3 3.5 6.01 4 5.68 8.50.5 8.18 Ø6 3 7.95 3.5 7.65 4 7.39 11.65.5 11.39 3 11.15 3.5 10.83 Ø8 4 10.60 4.5 10.7 5 10.01 6 9.36 Thickness Tolerance:+0.05/-0.10 mm Width Tolerance:+0.15/-0.0 mm Different industries will require different specifications, please contact us direcly for the most suitable specifications. 50

均溫板 Vapor Chamber 均溫板 Vapor Chamber 二維面傳導 Horizontally conduction 被動元件 Passive components 高穩定性 High stability 較熱管高十倍性能 Efficiency higher than heat pipe 10 times 極適用於高效能產品 Best for high power applications Properties VC001 VC00 VC003 Unit 尺寸 Size 56 56 106 70 106 70 mm 厚度 Thickness 3.0 3.0 3.0 mm 表面加工 Surface finishing 抗氧化 anti-oxidation - 外加元件 Extra components - - 銅鰭片 Copper heat sink - Different industries will require different specifications, please contact us direcly for the most suitable specifications. 散熱機制 Mechanism Exchange with External Heat 51

致冷晶片 Thermoelectric Cooling Chip 致冷晶片 Thermoelectric Cooling Chip 體積小 輕量化 Small bulk, light weight 無動件 低噪音 Vibration-free, noise-free 精確控溫 Precise temperature control 可靠度高 High reliability 適用於極端環境 High strength for rugged environment 廣泛用於冰箱 飲水機 醫療 / 軍用儀器和實驗科學儀器等, 需要溫度反覆變化的熱循環 (Thermal Cycle) 應用情境 此外, 致冷晶片也已大量導入於半導體晶圓的製程溫度控制上 It's widely used in medical equipment, freezer, drinking fountains, military petroleum instruments as these applications need thermal cycling control. Besides, it's also widely being applied to control the temperature during semiconductor IC manufacturing process. Size(mm) Height(mm) Imax(A) Vmax(V) Watt(W) 15 15 0 0 30 30 40 40 最大致冷量 @7 C Qmax(W) 最大致冷量 @50 C Qmax(W) R(Ohm) 3.1 6.0 3.8.8 13 14.3 0.45±10% 3.4 8.5.1 17.9 10.3 11.3 0.0±10% 3.6 3.9 3.8 14.8 8.6 9.5 0.85±10% 3.8 3.0 3.8 11.4 7.3 8 1.00±10% 3.9 6.0.1 1.6 7.4 8. 0.30±10% 4.7.0 3.8 7.6 4.4 5 1.65±10% 3.1 6.0 8.8 5.8 9.7 3.7 1.05±10% 3.4 8.5 3.8 3.3 18.8 0.8 0.35±10% 3.6 3.9 8.8 34.3 18.7 0.9 1.95±10% 3.8 3.0 8.8 6.4 16.6 18.0±10% 3.9 6.0 3.8.8 13.6 14.9 0.55±10% 4.7.0 8.8 17.6 10. 11. 3.70±10% 3.15 6.0 15.7 94. 53.1 59.1 1.90±10% 3.45 8.5 8.8 74.8 43.1 48 0.85±10% 3.65 3.9 15.7 61. 35. 39 3.50±10% 3.85 3.0 15.7 47.1 9.8 3.5 4.00±10% 3.95 6.0 8.8 5.8 31.1 34. 1.5±10% 3.95 6.0 11.8 70.8 48 5.8 1.65±10% 4.75.0 15.7 31.4 18. 19.5 6.70±10% 3.45 8.5 15.7 133.5 77.1 85 1.50±10% 3.95 6.0 15.7 94. 55.6 61.0±10% The above are our standard sizes. For other special sizes, please contact our product consultants. 5

電磁波吸收材料 Flexible Absorbent Materials TG-FAM 電磁波吸收材料 Flexible Absorbent Material RoHS Compliant 有效抑制電磁波干擾 Effective EMI suppression in a wide frequency range 超薄且容易彎曲, 方便至於不同位置 Ultra thin and extremely flexible, can be freely arranged in space 可配合 UL 等級的不導電雙面膠使用 Non-conductive adhesive backing (UL) available 有效預防共振及抑制耦合現象 Effective in preventing resonance and suppressing coupling 高表面阻抗值 High surface resistance 使用方便快速 Easy and fast to process 方便裁切各種尺寸 Can be cut any shape easily Magmetic Shielding 電子元件 - 筆記型電腦 個人電腦 工作站 衛星低雜訊降頻器 行動通訊設備 行動電話基地台 基地台 電腦週邊設備 無線設備 行動電話 高速時脈 無線射頻辨識 近場通訊 無線充電器... 除 EMI 的應用外,FAM 可處理 RFID 標籤 / 讀寫機貼在金屬上時讀取不良的問題, 最多可恢復原 80% 讀取距離, 適用於 LF(15KHz) 及 HF(13.56MHz) 頻段, 可省去 RFID 和金屬間的距離 Electronic components - Notebooks, PCs, workstations, LNBs for satellite systems, Mobile communications equipment, Base Stations for mobile phones, PHS, Peripheral devices for computers, Wireless equipment, Mobile Phones, High speed clocks, RFID, NFC, Wireless Charger, tec. Besides the application of EMI, FAM can be a solution for RFID on metal also. It suitable for LF(15KHz) and HF(13.56MHz) bands. It can deal with the malfunction problems when RFID Reader/Writer or RFID tag attached on metal (recover maximum 80% efficiency of the original distance). By this way can save more space from RFID to metal. Application for RFID NFC on metal FAM Magnetic Field FAM can change the magnetic flux path to avoid the magnetic flux affect others components. RFID tag only (100% original distance) RFID tag + metal (5% max original distance) RFID tag + FAM + metal (80% max original distance) Physical Properties TG-FAM1 TG-FAM3 TG-FAM6 TG-FAM7 Unit 適用頻率 Frequency 0.001~18.0 0.001~18.0 0.001~9.0 0.001~3.0 GHz 厚度 Thickness 0.1~.50 0.5/0.50/0.75 0.05/0.1/0./0.3/0.5 0.08/0.1/0. mm 最大尺寸 Maximum Size 400 400 10 97 (A4 size) 130 130 mm 材料 Material 磁性粉 + 橡膠 Magnetic Particles+Rubber 燒結鐵心 Sintering iron-core 導磁率 Magnetic Inductivity (μ'@1mhz) 5 50 170 140 - 鹵素 Halogen 含鹵 Halogen contained 無鹵 Halogen free 無鹵 Halogen free - 工作溫度 Working Temperature -40~+85-40~+155-30~+10 C 密度 Density 3.6 4.8 4.4 3.8 g/cm³ 表面阻抗 Surface Resistance 10 6 10 6 10 5 10 9 Ohm 結構 Structure FAM -sided adhesive tape Release paper Allow non/one/two sides adhesive PET Tape FAM -sided adhesive tape Release paper Allow one side PET / one side adhesive tape or two sides adhesive tape - - 53

電磁波吸收材料 Flexible Absorbent Material 導磁率 (µ = µ - j µ ) 50 FAM3 μ ' 50 ' 40 00 FAM6 ' Permeability 30 0 FAM1 μ ' Permeability 150 100 FAM7 ' FAM3 μ '' 10 50 FAM6 '' FAM1 μ '' 0 11 01 00 1000 MHz 0 1 FAM7 10 '' MHz 100 1000 反射損失 (1MHz~3GHz) db (S11) - -0.5-1.0-1.5 -.0 -.5-3.0-3.5 FAM1 0.1mm 0.5mm 0.50mm 0.0mm 0.33mm -5 00 1,0001,500,000,500 3,000 MHz db (S11) - 0.6mm -3-6 1.0mm 1.5mm -9-1.0mm -15.5mm -18 FAM1-1 -5 00 1,0001,500,000,500 3,000 MHz db (S11) - 0.5mm -1 - -3 0.50mm -4 0.75mm -5-6 FAM3-7 -5 00 1,0001,500,000,500 3,000 MHz db (S11) - -0.5-1.0-1.5 -.0 -.5-3.0-3.5-4.0-4.5 FAM6 0.05mm 0.1mm 0.mm 0.3mm 0.5mm -5 00 1,0001,500,000,500 3,000 MHz db (S11) - -0.5-1.0-1.5 -.0 -.5 0.08mm 0.1mm 0.mm FAM7-5 00 1,0001,500,000,500 3,000 MHz 網路分析儀 金屬 FAM 號角天線 54

電磁波吸收材料 Flexible Absorbent Materials 反射損失 (3MHz~18GHz) db (S11) 0.0-0.5-1.0-1.5 -.0 -.5 0.1mm 0.0mm 0.5mm 0.33mm 0.50mm FAM1 db (S11) 0-1 - -3-4 0.6mm 1.0mm 1.5mm.0mm FAM1.5mm -3.0 36 91 1 51 8 GHz -5 36 91 1 51 8 GHz db (S11) 0-1 - -3-4 -5-6 -7 0.5mm 0.50mm 0.75mm FAM3 36 91 1 51 8 GHz db (S11) 0.0-0.5-1.0-1.5 -.0 -.5 FAM6 0.05mm 0.1mm 0.mm 0.3mm 0.5mm 36 91 1 51 8 GHz db (S11) 0.0 0.08mm -0. 0.1mm -0.4-0.6-0.8 0.mm -1.0 FAM7-1. 36 91 1 51 8 GHz 其他輔助材料 Relative Material 項目 Item 工業用功能性膠帶 Adhesive tape 發泡緩衝材 Foam PET 離型 / 保護膜 PET Mylar film 類別 Type 單 / 雙面膠帶 導電膠帶 遮蔽膠帶 (NOMEX Kapton 3M TESA NITTO DIC TERAOKA SONY Hi-Bon SEKISUI ) 一般泡棉 /UL 泡棉 / 導電泡棉 黑 / 白 / 透明 Mylar 靜電膜 鋁箔 Aluminum 銅箔 Copper 纖維板 (FR4) Fibreboard 鐵氟龍 TEFLON 尼龍 Nylon 詳細產品資訊請直接聯繫產品顧問 For detailed product information, please contact the product consultant directly. 不同材料的導熱係數 Thermal Conductivities of Some Materials at Room Temperature 材質 Material 導熱係數 Thermal Conductivity 鑽石 Diamond 300 銀 Silver 49 銅 Copper 401 金 Gold 317 鋁 Aluminum 37 鐵 Iron 80. 水銀 / 汞 Mercury 8.54 玻璃 Glass 1.4 磚 Brick 0.7 材質 Material 導熱係數 Thermal Conductivity 水 Water 0.613 人類皮膚 Skin 0.37 木頭 Wood 0.17 氦 Helium (g) 0.15 軟質橡膠 Soft Rubber 0.13 玻璃纖維 Glass Fiber 0.043 空氣 Air (g) 0.06 氨基鉀酸酯 Urethane, rigid foam 0.06 55

TG Series Ultra Soft Thermal Pad Properties TG030 TG4040 TG4040F TG4040LC TG6050 TGX Unit Test Method Thermal Conductivity.1 4. 3.7 3.7 6.3 1.6 W/mK ASTM D5470 Thickness 0.5~5.0 0.5~.0 mm ASTM D374 Color White Blue Blue Blue Red Gray - Visual Flame Rating V-0 - UL 94 Dielectric Breakdown Voltage 16.3 15.3 15.3 15.3 13.3 1. KV/mm ASTM D149 Weight Loss <1 % ASTM E595 Density.4.8.8.6 3. 3.4 g/cm³ ASTM D79 Working Temperature -45~+00 C - Volume Resistance >10 10 Ohm-m ASTM D57 Elongation 300 100 100 100 50 - % ASTM D41 Tensile Strength 1 1 1 1 0.5 - kgf/cm ASTM D41 Standard Shape Sheet ones - - Hardness 5 35 30 30 50 55 Shore 00 ASTM D40 L37 Series Ultra Soft Thermal Pad Properties L37-3 L37-3F L37-3S L37-3L L37-5 L37-5S Unit Test Method Thermal Conductivity 1.8 1.5 1.6 1.7 1.9 W/mK ASTM D5470 Thickness 0.3~0 0.5/0.3/0.45 0.3~0 0.5~10 0.3~0 0.5~5.0 mm ASTM D374 Color Yellow Yellow Yellow Yellow Gray Gray - Visual Flame Rating V-0 - UL 94 Dielectric Breakdown Voltage 10. 3.1/4.1/5.1 13.3 15.3 10. 16.3 KV/mm ASTM D149 Weight Loss <1 <1 <1 <0. <1 <1 % ASTM E595 Density.17.1.4.38.4 g/cm³ ASTM D79 Working Temperature -40~+00-40~+00-40~+00-45~+00-40~+00-45~+00 C - Volume Resistance >10 11 >10 11 >10 10 >10 11 >10 1 >10 10 Ohm-m ASTM D57 Elongation - 5 350 0 300 300 % ASTM D41 Tensile Strength 66.4 150 8-1 1 kgf/cm ASTM D41 Standard Shape Sheet ones - - Hardness Shore 00 45 Shore A 75 Shore 00 45 Shore A 1.5 Shore A 0 Shore 00 0 Shore 00/A ASTM D40 H48 Series Ultra Soft Thermal Pad Properties H48- H48-K H48-6 H48-6G H48-6S Unit Test Method Thermal Conductivity.3.3 3.4 6.3 1.9 W/mK ASTM D5470 Thickness 0.3~0 0.1/0./0.3 0.3~0 0.3~5.0 0.3 mm ASTM D374 Color Dark Red Dark Red Dark Gray Gray Dark Red - Visual Flame Rating V-0 - UL 94 Dielectric Breakdown Voltage 5.1 1.3/.6/3.6 13.3 7 KV/mm ASTM D149 Weight Loss <1 <0.5 <1 <1 <1 % ASTM E595 Density.43.4.4 3.09 1.95 g/cm³ ASTM D79 Working Temperature -40~+00-45~+00-40~+00 C - Volume Resistance >10 1 >10 1 >10 11 >10 11 >10 1 Ohm-m ASTM D57 Elongation 8 50 130 60 0. % ASTM D41 Tensile Strength 7-8 6 66.5 kgf/cm ASTM D41 Standard Shape Sheet ones - - Hardness 0 70 5 30 75 Shore A ASTM D40 56

熱傳遞原理 Heat Theorem Convection&Radiation 熱對流 Convection T sink R film resistance 熱輻射 Radiation 熱傳導 Conduction Conduction R contact resistance R fin resistance R material resistance R spreading resistance T sourse 熱傳導熱對流熱輻射 熱經由物質固體的接觸, 由高溫往低溫傳熱的方式 流體受熱上升 遇冷下降是對流的原理 不需任何物質當媒介, 而直接由熱源傳播出去的方式為輻射 對熱傳導的影響 Influence of Thermal Interface Material on Heat Conduction Air/Gap Heat Sink Thermal Interface Material Heat Sink 沒有良好的導熱介質時, 兩個連接面熱流通過的路徑方式 Heat flows pass through slowly, when it is without TIM. 具有良好的導熱介質時, 兩個連接面熱流通過的路徑方式 Heat flows pass quickly, when it is with TIM. 未使用導熱介質時, 兩個連接面的熱流傳導較慢, 導熱效能相對較差 若使用導熱介質連接兩個連接面時, 熱流傳導速度較快也較平均, 散熱效能相對提升 Without thermal interface materials, the heat flows pass through joint faces slowly, and the thermal performance is bad. Using thermal interface materials to link two joint faces, the heat flows pass through easily, and the thermal performance is good. 57

散熱模組 Thermal Module APPLICATION Electric Vehicles, 5G, Autopilot System, Mobile Phone, AIOT, HPC (High Performance Computing), Server, IC, CPU, MOS, LED, Mother Board, Power Supply, Heat Sink, LCD-TV, Notebook, PC, Telecom Device, Wireless Hub, DDR ll Module, etc. Fan By creating the air flow, cooling fan provides cool air to lower the temperature of the industrial equipment, also, helps the industrial electric or electronic projects to keep the high efficiency and its performance will not be lowered due to the heat generated. Heat Sink Heat sink (mainly made of aluminum or copper) is a kind of metal contain high thermal dissipation ability, light weight and easy to have machining. Stamping, extrusion, die casting and forging are the production way of heat sink. These products and be the main components of heat dissipation for various applications and their application shell. P.45 Heat Pipe It is a special material with fast heat-balancing characteristics. It utilizes the vapor phase and liquid two-phase change of the material, and the convection principle to achieve multiple times of heat transfer than the metal heat conduction. P.50 Vapor Chamber Vapor chamber's function and working theory is same as heat pipe. In order to achieve a cycle working system, it works through the evaporation and condensation of the working fluid in the platy cavity. Vapor chamber is a product that can conduct a small part of heat source to a large area evenly and rapidly. P.51 Thermal Interface Material By using a special process, we use the silicone as the base material, adding thermal conductive powder and flame retardant together to make the mixture to become thermal interface material. This is effective in lower the thermal resistance between the heat source and the heat sink. P.1 58

選擇合適的 Product Guide 導熱係數 Thermal Conductivity 硬度 Hardness 型號 Type 導熱係數 Thermal Conductivity 型號 Type 硬度 Hardness 導熱矽膠片 Thermal Pad 導熱膠帶 Thermal Tape 導熱膏 Thermal Grease 導熱膠泥 Thermal Putty 封裝膠 Potting Compound 非矽型導熱材料 Non-silicone Thermal materials 其他 Other Materials GT10D GT15 TG-A0KF TG-A0KX GT0 TG-A00 TG-A3500F GT30 TG-A38KF TG-A3500 TG-A38KX TG-A4500F TG-A4500 TG-A600F TG-A600 TG-A150 TG-A1450 TG-A1660 TG-A1780 TG-T1000 Li98T Li000 Li98P Li98C Li98CN Li000A S6060B S6060C TG-S808 TG4040 Putty TG6060 Putty S70AB S730 A96AB PC93 TG-NSP5 PC94 TG-N909 Ti900 CP Series TG-V833 TG-V838 PH 3 T6 T68 TG-P100 Series 1.5 W/mK 1.6 W/mK 1.8 W/mK.0 W/mK.1 W/mK. W/mK 3.0 W/mK 3. W/mK 3.3 W/mK 3.5 W/mK 3.8 W/mK 4.0 W/mK 4.5 W/mK 5.0 W/mK 6. W/mK 1.5 W/mK 14.5 W/mK 16.6 W/mK 17.8 W/mK 1.00 W/mK 1.30 W/mK 1.30 W/mK 1.80 W/mK 1.90 W/mK.10 W/mK.10 W/mK 1.9 W/mK 5.3 W/mK 8.0 W/mK 3. W/mK 6.3 W/mK 0.8 W/mK.1 W/mK.6 W/mK.1 W/mK.6 W/mK 4. W/mK 9.0 W/mK 1.9 W/mK.0 W/mK 3.3 W/mK 3.8 W/mK 金屬層 : 400 W/mK, 塗布 : 1. W/mK xy : 400 W/mK, z : 5~0 W/mK xy : 1500 W/mK, z : 5 W/mK xy : 1500-1800 W/mK, z : 1 W/mK 00-type 硬度 Shore00 0-55 硬度 ShoreA 15-0 硬度 Shore00 60-65 硬度 ShoreA 5-90 0 50 60 70 80 90 A-type TG-A00 15 TG-A3500(F) 30 TG-A4500(F) 50 TG-A600(F) 50 TG-A150 50 PC94 50 PC93 55 TG-A0KX(KF) 55 S730 17 TG-A38KX(KF) 60 TG-A1450 60 TG-A1660 65 TG-A1780 65 S70AB 34~43 CP Series 65 A96AB 68 GT Series 70/75 GT10D 75 硬度對照表 Hardness Table 0 10 0 30 40 50 60 70 80 90 100 B-type 0 10 0 30 40 50 60 70 80 90 100 C-type 0 10 0 30 40 5060 70 80 D-type 0 10 0 30 40 50 E-type 0 0 30 40 50 60 70 80 90 59

台灣總部 (Taiwan) A 桃園市桃園區大仁路50巷33號 No.33, Ln.50, Daren Rd., Taoyuan Dist., Taoyuan City 330058, Taiwan T +886-3-361-8899 E service@tglobal.com.tw W www.tglobalcorp.com 昆山中國 (China) T +86-51-579-5936 E kunshan@tglobal.com.tw 電動車與汽配 Automotive Version17 000501 通訊 Telecom 東莞中國 (China) T +86-769-838-978 E dg3@tglobal.com.tw 面板 Panel 洛杉磯 美國 (USA) T +1-66-888-347 E usa@tglobal.com.tw 5G應用 5th Generation Mobile Network 路德維斯 英國 (UK) T +44-1455-553-510 電源供應 Power Supply 醫療軍用 Medical&Military