1
特性 FEATURES 高精度 高稳定性 High precision and high stability 响应快速 Quick temperature response 优良的抗热冲击性 Resistant to heat shock 耐湿性能优良 Moisture resistant 高科技批量化生产保证了产品的高品质和高稳定性 Excellent quality and high stability by high technical mass production 用途 APPLICATIONS 各种空调机 电冰箱 热水器 微波炉等的温度检测 Temperature test in all kinds of air-condition,refrigerator,hot boiler,microwave oven. 型号命名 PART NUMBERING FH - CWF / 1 2 3 4 5 6 7 8 9 1 风华公司标示记号 Fenghua Electronics Engineering R&D CO.,LTD.code 2 标示符号 NTC temperature sensors code 3 公称电阻值为 25 度时的数值单位为欧姆 Rated zero-power resistance(r 25 ) unit:ω 前两位数字表示电阻值的有效数字, 第三位数字表示其后零的个数 The first two are significant figure of resistance and the third one expresses number of following zeros 4 电阻值公差符号 (%) Tolerance of R 25 (%) 记号 Code E F G H J X 电阻值公差 ±0.5 ±1.0 ±2.0 ±3.0 ±5.0 特殊公差 Tolerance of R 25 5 B 值常数记号 B value Code 6 B 值公差符号 (%)Tolerance of B value(%) Specific tolerance 记号 Code E F G H J X B 值公差 Tolerance of B ±0.5 ±1.0 ±2.0 ±3.0 ±5.0 特殊公差 7 计算 B 值温度代码 B value Temperature Code Specific tolerance 记号 Code A B C D E F G H M N 两温度点 25/50 25/ 85 0/25 0/50 0/100 0/80 25/100-18/25-20/25 5/25 8 器件的长度标示记号单位为毫米 Length of the sensor unit:mm 9 器件头外型标示记号 Termination shape code 记号 Code C E 外型 Termination shape 铜壳灌封型 Copper shell 环氧树脂包封型 Epoxy Resin 2
外形尺寸 APPEARACE AND DIMENSIONS 灌封型 (C 型 ) Pour type(type C) 外壳参数 Case parameter 外壳外径 Ф(mm) Outside diameter 外壳长度 (mm) Case length 4.0 25 5.0 20 5.0 25 6.0 25 6.0 30 7.0 25 包封型 (E 型 ) Wrap type(type E) 外壳材料 Case material 铜 铝 不锈钢等 copper aluminum stainless steel and so on. 注 : 可根据用户所需制作各种外形尺寸的传感器 NOTE:We can produce all kind of sensors that user need. 3
性能参数 PERFORMANCE PARAMETER 阻值范围 (R 25 ):10 2 ~10 6 Ω Rated resistance(r 25 ):10 2 ~10 6 Ω 阻值精度 :±0.5% ±1% ±2% ±3% ±5% Resistance tolerance:±0.5% ±1% ±2% ±3% ±5%. B 值范围 (25/50 或 25/85 ):2500~5000K B-Constant(25/50 or 25/85 ):2500~5000K. B 值精度 :±0.5% ±1% ±2% ±3% ±5%. Tolerance of B-constant:±0.5% ±1% ±2% ±3% ±5%. 使用温度范围 :-40~100 Operating temperature:-40~100 耗散系数 ( 静止空气中 ):C 型 :2.0~4.0mw/ ;E 型 :3.0~4.5mw/. Dissipation factor (in still air):type C:2.0~4.0mw/ ;type E:3.0~4.5mw/. 热时间常数 ( 静止空气中 ):C 型 : 30s,E 型 : 20s. Thermal time constant (in still air):type C: 30s,type E: 20s. 电阻 - 温度特性 (R-T 特性 ) R-T characteristics R-T characteristics 4
型号 type 阻值 Resistance (kω) 温度 Temperature ( ) 153F 3950F 233F 3950F 233F 4200F 103F 3700F 103F 3435F 152F 3850F 442F 3950F -40 531.1 814.3 885.0 224.3 198.31 45.86 156.9-30 274.1 420.3 458.4 130.5 115.49 24.70 80.97-20 148.5 227.8 247.3 77.9 69.530 13.83 43.88-10 84.16 129.0 138.3 47.64 43.158 8.024 24.86 0.0 49.45 75.03 79.97 29.77 27.550 4.803 14.61 10 30.02 46.04 47.62 18.98 18.042 2.958 8.869 20 18.78 28.79 29.13 12.33 12.105 1.870 5.546 30 12.07 18.51 18.28 8.160 8.3051 1.213 3.565 40 7.966 12.21 11.76 5.530 5.8161 0.8085 2.353 50 5.382 8.253 7.734 3.829 4.1509 0.5524 1.590 60 3.716 5.698 5.194 2.704 3.0148 0.3859 1.098 70 2.616 4.012 3.555 1.944 2.2255 0.2751 0.7728 80 1.876 2.876 2.476 1.421 1.6677 0.1998 0.5541 90 1.367 2.096 1.754 1.055 1.271 0.1475 0.4039 100 1.013 1.553 1.262 0.7943 0.9832 0.1107 0.2992 R25 15.00 23.00 23.00 10.00 10.00 1.500 4.431 B25/50 3950 3950 4200 3700 3850 3950 B25/85 3435 注 : 可根据用户所需制作不同性能参数的传感器 NOTE:We can produce all kinds of sensors that user need. 主要技术参数 The main characteristics 1. 额定零功率电阻值 R 25 指在 25 条件下, 测量的热敏电阻的零功率电阻值 1. Rated zero-power resistance (R 25 ) The zero-power resistance at 25 (298.15K). 2. B 值定义为两个温度下零功率电阻值的自然对数之差与这两个温度倒数之差的比值 公式为 : B=ln(R T1 / R T2 )/(1/T1-1/T2) 5
式中 R T1 : 温度 T1 时的零功率电阻值 R T2 : 温度 T2 时的零功率电阻值 2.B value B value is expressed by the following equation: B=ln(R T1 / R T2 )/(1/T1-1/T2) R T1 :Resistance at T1(K). R T2 :Resistance at T2(K). 3. 热时间常数 τ 在零功率条件下, 当温度发生突变时, 热敏电阻体温度变化了始末两个温度差的 63.2% 所需要的时间 τ 与热敏电阻器的热容量 C 成正比, 与其耗散系数 δ 成反比 即 :τ=c/δ 3.Thermal time constantτ The time necessary for a thermistor to vary its temperature by 63.2% of the total difference its initial temperature and its final temperature when it is subjected to a temperature step under zero-power conditions. 4. 耗散系数 δ 在规定的环境温度下, 热敏电阻器耗散功率变化与其相应温度变化之比 即 : δ= P/ T 在工作温度范围内,δ 随环境温度变化而有所变化 4.Dissipation factorδ The quotient of the change in power dissipation in a thermistor and the Resultant temperature change of the element. 5. 零功率电阻温度系数 α T 指在规定的温度下, 热敏电阻器的零功率电阻值随温度的变化率与它的零功率电阻值之比 : α T =1/R T dr T /dt =-B/T 2 式中 :α T 温度 T 时的零功率电阻温度系数 ; R T 温度 T 时的零功率电阻值 ; T 温度 ( 以 K 表示 ); B B 值 (K); 5.Temperature coefficient at zero-power of the resistance α T At a specific temperature T α T is a ratio of the zero-power resistance change with temperature and the zero-power resistance. 6
α T =1/R T dr T /dt =-B/T 2 定货注意事项 Attentions of Order 客户订购我公司产品请注明如下项目 : Please comment the next if you want to order: 1. 用途 PURPOSE 温度测定, 温度控制, 温度补偿, 温度记录, 或其他 Such as temperature survey,control,compensating, thermography and so on. 2. 使用环境 SERVICE ENVIROMENT 大气, 水中, 湿气中, 酸碱环境中, 或其他 Such as atmosphere,water,moisture,acid-base enviroment and so on. 3. 使用温度范围 THE WORKING RANGE OF TEMPERATURE ( ) ( ) 4. 品名形状及尺寸 ITEM NAME FORM AND SIZE ( ) 5. 电阻值 THE RESISTANCE VALUE ( )KΩ±( )% at ( ) 6.B 值 THE VALUE OF B B( / )=( )K ±( )% 7. 热时间常数 THERMAL TIME CONSTANT ( ) 秒 ( ) 秒 ( ) 环境 ( )S ( ) S ( )enviroment 8. 耗散系数 DISSIPATON FACTOR ( )mw/ 9. 其它特定的技术条件 OTHER SPECIAL TECHNICAL CONDION S ( ) 注 : 当您的使用要求超出了目录所列产品参数时, 请与我们联系, 我们的工程师 7
将为您专门设计制造, 尽力满足您的要求 Attentions:If the service request you want is out of the list parameter, please relate to us,and our engineers will design and manufact for you specially. 8