Agilent EcPRINT Operating Guide 操作说明书

Size: px

Start display at page:

Download "Agilent EcPRINT Operating Guide 操作说明书"

竹隙扁蓬
5 years ago
Views:

1 Agilent EcPRINT Operating Guide 操作说明书 Agilent Technologies

2 Notices Agilent Technologies, Inc No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Agilent Technologies, Inc. as governed by United States and international copyright laws. Manual Part Number Edition First edition, April 2012 Printed in China Agilent Technologies, Inc. 412 Ying Lun Road Shanghai P.R. China 安捷伦科技 ( 上海 ) 有限公司上海市浦东新区外高桥保税区英伦路 412 号联系电话 :(800) Warranty The material contained in this document is provided as is, and is subject to being changed, without notice, in future editions. Further, to the maximum extent permitted by applicable law, Agilent disclaims all warranties, either express or implied, with regard to this manual and any information contained herein, including but not limited to the implied warranties of merchantability and fitness for a particular purpose. Agilent shall not be liable for errors or for incidental or consequential damages in connection with the furnishing, use, or performance of this document or of any information contained herein. Should Agilent and the user have a separate written agreement with warranty terms covering the material in this document that conflict with these terms, the warranty terms in the separate agreement shall control. Technology Licenses The hardware and/or software described in this document are furnished under a license and may be used or copied only in accordance with the terms of such license. Restricted Rights Legend U.S. Government Restricted Rights. Software and technical data rights granted to the federal government include only those rights customarily provided to end user customers. Agilent provides this customary commercial license in Software and technical data pursuant to FAR (Technical Data) and (Computer Software) and, for the Department of Defense, DFARS (Technical Data -Commercial Items) and DFARS (Rights in Commercial Computer Software or Computer Software Documentation). Safety Notices CAUTION A CAUTION notice denotes a hazard. It calls attention to an operating procedure, practice, or the like that, if not correctly performed or adhered to, could result in damage to the product or loss of important data. Do not proceed beyond a CAUTION notice until the indicated conditions are fully understood and met. WARNING A WARNING notice denotes a hazard. It calls attention to an operating procedure, practice, or the like that, if not correctly performed or adhered to, could result in personal injury or death. Do not proceed beyond a WARNING notice until the indicated conditions are fully understood and met. EcPRINT Operating Guide

3 Agilent EcPRINT Operating Guide EcPRINT Operating Overview 4 Install the Software 4 Install EcPRINT 4 Install the USB driver 4 Configure the USB port 6 Run the Program 8 User Interface Reference 10 Agilent Technologies 3

4 EcPRINT Operating Overview The EcPRINT software allows a PC to communicate with an Agilent electrochemical instrument through a USB port. The instrument sends acquired data to the PC for viewing, printing, and saving the data to a PC storage device. Install the Software Install EcPRINT Install the USB driver This program is supported on the following operating systems: 32 bit Windows 7 32 bit Windows XP, Service pack 3 1 Download the EcPRINT.ZIP file from this Agilent website: Utilities/Pages/default.aspx. 2 Unzip the EcPRINT.ZIP file to a temporary directory. 3 From the temporary directory location, double-click the EcPRINT.EXE file and follow the instructions provided on the software setup wizard to complete the installation of the EcPRINT program. The USB driver must be installed before running this program. Install the provided USB driver on a PC to allow communication with the instrument. If this driver was previously installed for EcFWUPDATE please skip this procedure. 1 Run CP210xVCPInstaller.exe, which is located in the temporary directory used for unzipping the EcPRINT.ZIP file. 2 With the instrument powered off, connect the USB cable (provided with the instrument) from the instrument port labeled USB to a USB port on the PC. 4 EcPRINT Operating Guide

5 EcPRINT Operating 3 Power on the instrument. 4 Open the device manager on the PC to view the newly installed USB driver labeled Silicon Labs CP210x USB to UART Bridge (COMX), where X is the communication port number. This label indicates that the USB driver has been properly configured for the instrument. The port number must be in the range of 1 to 16. If the port number shown is outside this range, double-click on the driver label to open the properties dialog, then click on the Port Settings to bring up the Advanced Settings dialog, and select a valid port number from the COM Port Number drop-down. 5 Record this USB communication port number (12 in this example) for configuration of the EcPRINT software. EcPRINT Operating Guide 5

6 EcPRINT Operating Configure the USB port This procedure assigns the previously recorded USB port number to the EcPrint program. 1 Double-click the EcPRINT icon on the PC desktop to start the program. Initially the PC screen displays Connecting instrument... A connecting error! message displays because the port number is not yet configured. 6 EcPRINT Operating Guide

EcPRINT Operating 2 Click Set Commport to display the Set Commport dialog. 3 Enter the previously recorded communication port number (12 in this example) and click OK.

7 EcPRINT Operating 2 Click Set Commport to display the Set Commport dialog. 3 Enter the previously recorded communication port number (12 in this example) and click OK. 4 Click Retry and the EcPRINT software should now connect to the instrument and display the name of the instrument that is connected. The EcPRINT software user interface window is then displayed. EcPRINT Operating Guide 7

8 EcPRINT Operating Run the Program Configure the USB port before running the software. 1 Double-click the EcPRINT icon on the PC desktop to start the program. When the instrument communicates with the EcPRINT software, it displays the program user interface window with recent data readings in the data display area. Instrument type Toolbar Data display area 2 Press on the instrument keypad to enter the review status. This mode allows you to view the last calibration result or saved data. 3 Press on the instrument keypad to transfer the data displayed in the data display area of the instrument to the PC and display it in the EcPRINT user display. 8 EcPRINT Operating Guide

9 EcPRINT Operating 4 Click Print on the EcPRINT toolbar and the Print dialog displays. 5 Select a printer and click Print. The displayed instrument data is sent to the selected printer. If a PDF printer is installed, you may select it to convert the data to a PDF file. Select PDF printer, to convert the data to PDF format. 6 To optionally save this data to an ECP file, click Save on the EcPRINT toolbar. This saved data can only be used with the EcPRINT program. 7 To optionally load a previously saved ECP data file, click Open on the EcPRINT toolbar to load the saved (.ECP) data file into the data display area for viewing or printing. EcPRINT Operating Guide 9

10 EcPRINT Operating User Interface Reference Instrument type Toolbar Data display area The software interface is composed of 3 parts: Instrument type Toolbar Data display area Instrument type Displays the Agilent electrochemical instrument type. 10 EcPRINT Operating Guide

11 EcPRINT Operating Toolbar Exit Reset Save Open Print exits the EcPRINT program clears all output data saves the data as an ECP file opens the saved data ECP file sends the output data to a specified printer Data display area Displays instrument data output when the instrument s Output button is pressed, and also displays data from ECP data files loaded into the EcPRINT program. EcPRINT Operating Guide 11

12 EcPRINT Operating 12 EcPRINT Operating Guide

13 Agilent EcPRINT 操作说明书 Agilent Technologies

14 声明 Agilent Technologies, Inc 根据美国和国际版权法的规定, 未经 Agilent Technologies, Inc. 事先同意和书面许可, 不得以任何形式或采取任何手段 ( 包括电子存储和检索或翻译成其他语言 ) 复制本手册中的任何内容手册部件号版本第一版, 2012 年 4 月中国印刷安捷伦科技 ( 上海 ) 有限公司上海市浦东新区外高桥保税区英伦路 412 号联系电话 :(800) 担保说明本手册内容按原样提供, 在将来的版本中如有更改, 恕不另行通知此外, 在使用法律允许的最大范围内, Agilent 对本手册以及此处包含的任何信息不作任何明示或暗示担保, 包括但不仅限于适销性针某一特殊用途的实用性的暗示担保对于因提供使用或执行本手册或此处包含的任何信息而产生的错误, 或造成的偶然或必然的损失, Agilent 不承担任何责任如果 Agilent 与用户签订了单独的书面协议, 而其中涉及本手册内容的担保条款与这些条款存在冲突, 则以协议中的担保条款为准安全声明小心小心提示表示存在危险提醒您注意某个操作步骤某项操作或类似问题, 如果执行不当或未遵照提示操作, 可能会损坏产品或丢失重要数据只有完全理解并符合指定的条件时, 才可以忽略小心提示的要求继续进行操作警告警告提示表示存在危险提醒您注意某个操作步骤某项操作或类似问题, 如果执行不当或未遵照提示操作, 可能会导致人身伤害或死亡只有完全理解并符合指定的条件时, 才可以忽略警告提示的要求继续进行操作 Agilent EcPRINT 操作说明书

15 Agilent EcPRINT 操作说明书 EcPRINT 操作说明书概述 16 软件安装 16 安装 EcPRINT 16 安装 USB 驱动程序 16 设置通讯口 18 软件运行 20 软件界面 22 Agilent Technologies 15

16 EcPRINT 操作说明书概述 EcPRINT 是 Agilent 电化学仪器的打印软件通过仪器的 USB 接口, 软件可以接收仪器输出的数据, 可通过 PC 浏览打印或保存数据软件安装该程序支持以下操作系統 : 32 位的 Windows 7 32 位 Windows XP Service Pack 3 安装 EcPRINT 1 从安捷伦公司网站 Utilities/Pages/default.aspx 下载 EcPRINT.ZIP 软件包 2 将软件包 EcPRINT.ZIP 解压到一个临时文件夹 3 双击 EcPRINT.EXE 并根据软件安装向导完成软件安装在使用 EcPRINT 软件之前必须安装 USB 驱动软件安装 USB 驱动程序必要时, 需安装 USB 驱动软件将计算机的 USB 口模拟成 RS232 接口如果已经安装过驱动程序, 请跳过这一步 1 运行随本软件一起提供的 USB 驱动程序 CP210xVCPInstaller.exe ( 包含在 EcPRINT.ZIP 软件包中 ) 2 断开仪器电源, 用 USB 连接线 ( 随仪器附带 ) 将仪器连接到计算机的一个 USB 接口 3 打开仪器电源 16 Agilent EcPRINT 操作说明书

17 EcPRINT 操作说明书 4 进入计算机设备管理器, 在端口一栏中可以看到已安装的 USB 串口设备,Silicon Labs CP210x USB to UART Bridge (COMX), 表示 USB 驱动程序已经正确安装, 可以正常使用 X 为通讯端口号这个模拟的通讯口必须在 1 到 16 之间如果通讯口号不在此范围, 双击这个通讯口打开 Property" ( 属性 ) 对话框, 点击 Port Settings"( 端口设置 ), 然后点击 Advanced Settings" ( 高级 ), 打开高级设置对话框, 并从 COM Port Number" (COM 端口号 ) 下拉列表中选择合适且未被占用的端口号 5 记录此通讯口号 ( 图例中 12 为通讯口号 ) Agilent EcPRINT 操作说明书 17

18 EcPRINT 操作说明书设置通讯口这一章节中将把安装 USB 驱动程序过程中记录的 USB 端口号的分配给 EcPRINT 程序 1 双击桌面上图标, 开始运行 EcPRINT 软件, 软件将显示 Connecting instrument...", 如下图所示由于通讯口还没有设置, 软件将显示 Connecting error! 错误信息 18 Agilent EcPRINT 操作说明书

19 EcPRINT 操作说明书 2 点击按钮 Set Commport 重新进行端口设置, 如下图所示 3 输入安装 USB 驱动程序过程中记录的 USB 端口号, 点击按钮 OK 4 点击 Retry, 软件将连接仪器并显示仪器控制界面 Agilent EcPRINT 操作说明书 19

20 EcPRINT 操作说明书软件运行在使用软件之前, 需要先设置 USB 通讯口 1 双击桌面上图标, 开始运行 EcPRINT 软件当仪器正确联机后, EcPRINT 软件将显示仪器窗口, 如下图所示仪器名称工具条数据显示区 2 在仪器面板上按键, 可以进入查看数据状态, 可以查看上次校正结果或已保存的数据 3 在仪器面板上按键, 软件能够接收仪器输出的数据, 并按打印格式进行显示 4 点击 ZcPRINT 软件工具条按钮 Print, 显示打印数据对话框 20 Agilent EcPRINT 操作说明书

单击工具条上 Save 按钮保存的数据只能用 EcPRINT 软件读取 7 要加载以前保存的 ECP 的数据文件, 单击

21 EcPRINT 操作说明书 5 选择一个打印机, 点击按钮 Print 进行打印如果计算机安装了 PDF 打印机, 可将数据转为 PDF 格式保存如下图所示选择 PDF 打印机, 将数据转为 PDF 格式保存 6 要保存此数据为 ECP 格式的文件, 单击工具条上 Save 按钮保存的数据只能用 EcPRINT 软件读取 7 要加载以前保存的 ECP 的数据文件, 单击 EcPRINT 工具条上按钮 Open, 加载 ECP 格式数据文件, 并可以在数据显示区域查看或打印数据 Agilent EcPRINT 操作说明书 21

22 EcPRINT 操作说明书软件界面仪器名称工具条数据显示区软件界面主要有以下 3 个部分 : 仪器名称工具条数据显示区仪器名称显示所连接的仪器名称 22 Agilent EcPRINT 操作说明书

23 EcPRINT 操作说明书工具条 Exit Reset Save 退出清除全部输出数据保存数据, 格式为 ECP Open 打开保存的数据文件 (ECP 格式 ) Print 打印输出数据数据显示区实时显示当按仪器上 Output 按钮时输出的数据或从 ECP 文件读取的数据 Agilent EcPRINT 操作说明书 23

24 EcPRINT 操作说明书 24 Agilent EcPRINT 操作说明书

26 Agilent Technologies, Inc Printed in China 04/2012 First Edition, April 2012 * * Agilent Technologies

Panaboard Overlayer help

Panaboard Overlayer help Panaboard Overlayer Image Capture Software for Electronic Whiteboard (Panaboard) ... 3... 5... 6... 13...14 Panaboard Overlayer 1. 2. 3. 4. 4-1. 4-2. [ / ] ( ) 4-3. 5. 6. 6-1. 6-2. [ / ] ( ) 7. Panaboard