NC /02

Size: px

Start display at page:

Download "NC /02"

脱擂杜
7 years ago
Views:

1 EN ZH DH4110 / DH4116 / DH4120 / DH4130 NC /02-39/12

2 Fig Fig.1 2 Fig Fig.2 Fig.5 2

3 Fig.6 Fig.7 3

4 EN Read the instructions and the safety guidelines carefully before use and keep this manual. PRODUCT DESCRIPTION 1 - Control panel 2 - Carrying handle 3 - Air outlet grill (DH4110), Air outlet with automatic-opening vent (DH4116, DH4120, DH4130) 4 - Water collection tank of 5 Liters 5 - Tank water level viewing window 6 - Tank handles 7 - Tank cover 8 - Float 9 - Rollers 10 - Removable pre-filter/nano holder 11 - Removable pre-filter/nano (cleanable) 12 - Air entry grill 13 - Permanent drainage opening plug 4

5 CONTROL PANEL DESCRIPTION EN DH4110 : 16L model G F J L M H I A N O B C DH4116 : 16L model, DH4120 : 20L model and DH4130 : 25L model G F J L M H I Control panel A - ON/OFF button B - Objective relative humidity selection button C - Speed selection button D - DRY function button (Mod. DH4116, DH4120 & DH4130) E - SWING function button (Mod. DH4116, DH4120 & DH4130) F - PROG/TIMER function button G - Prog/Timer indicator lamp H - Tank full indicator lamp I - Automatic defrosting indicator lamp Display screen A D E P K N O B C J - Display of defined times (Prog and Timer) K - Selection clothes drying (Mod. DH4116, DH4120 & DH4130) L - Display of temperature and relative humidity of the room M - Selection 2 speeds N - Objective relative humidity factor 50%, 60%, 70% (humidity control) O - Continuous dehumidification indicator lamp P - Air outlet vent swing action (Mod. DH4116, DH4120 & DH4130) 5

6 EN Excessive atmospheric humidity makes a house uncomfortable and can have adverse consequences. Your dehumidifier allows you to remove damp air from your home by collecting the excess water vapour suspended in the air. It protects your living environment from the damaging effects of excessive humidity. Drying clothes (Mod. DH4116, DH4120 & DH4130) Thanks to its DRY function, your dehumidifier can also help you dry your washing even faster. DAMPNESS IS EXPRESSED AS RELATIVE HUMIDITY (HR). Relative humidity is a percentage indicating the quantity of water vapour in the air as a proportion of the maximum amount of water vapour that the air is able to contain at that temperature. Relative humidity is measured with a hygrometer: RH <50%: the air in the room is too dry. RH between 50 and 60%: this is considered healthy. RH >60%: the air is too humid. OPERATING PRINCIPLE - The air is drawn in by a fan system and then passes through a refrigerant evaporator where it is cooled and the excess humidity is collected. The air leaving the refrigerant evaporator is dry and cold. - It then passes through the refrigerant condenser which warms it before it is dispersed through the room. - The condensed water is collected in the tank or removed through a hose for continuous drainage. LOCATION First place the dehumidifier in the room requiring priority treatment. To maintain a good level of humidity throughout the home, the dehumidifier should then be installed in a central position. The air must be allowed to circulate freely; ensure that the appliance is not installed behind curtains or near any other obstruction and leave a minimum free space of 10 cm (4 in) on all sides of the appliance. 6

7 WARNINGS EN It is essential to read these instructions carefully and to observe the following recommendations. For your safety, this appliance is compliant with applicable standards and regulations (Low (Voltage and Electromagnetic Compatibility Directives). This appliance is intended only for domestic use. It may not be used for industrial purposes. The warranty is void in the event of damage resulting from improper use. Do not operate your appliance in a dusty atmosphere or where there is a fire risk. Before each use, check that the appliance, power cord and plug are in good general condition. Never insert objects into the appliance (e.g. needles). If the power cord is damaged, it must be replaced by the manufacturer, an approved after-sales service or a similarly qualified person, in order to avoid any danger. This appliance is not intended for use by people (including children) whose physical, sensory or mental capacities are disabled, or by people with no experience or familiarity with such devices, unless they are supervised by a person who is responsible for their security or have received instructions as to how to use the appliance. This appliance may be used by children aged 8 years and over and people with reduced physical, sensory or mental abilities or lacking in experience or knowledge if they are correctly supervised or if instructions concerning the completely safe use of the appliance have been given to them and if the risks incurred have been understood. Children must be supervised to ensure that they do not play with the appliance. User cleaning and maintenance should not be carried out by unsupervised children. Never pull on the power cord or the appliance, even to disconnect the plug from the wall socket. Unroll the power cord completely before use. The regulations regarding the elimination of oil and refrigerant for storage must be respected. VERY IMPORTANT Do not cover the air inlet and outlet grills. Do not block the air outlet vent (mod. DH4116, DH4120 and DH4130) Do not operate the appliance with the air outlet vent closed (mod. DH4116, DH4120 and DH4130) Do not manually force swinging of the air outlet vent (mod. DH4116, DH4120 and DH4130) Do not touch the appliance with wet hands. The appliance must be installed such that the control buttons cannot be reached by a person using the bath or shower. Never use the appliance in other than an upright position. Place the appliance on a flat and stable surface. Do not place heavy objects or children on the appliance. Do not put anything in the tank. Stop your appliance with the (A) button before disconnecting it. Turn off and disconnect the appliance before moving it. In case of prolonged absence: turn off the appliance with the button (A) and unplug it. The design of this IPX2 appliance means it can be used in all parts of the house, including those with risks of falling water (kitchen, bathroom, etc.). The electrical installation of the room and the way the appliance is installed and used must however conform to the standards in your country. START-UP OF THE APPLIANCE Before using your appliance for the first time, check that the supply voltage matches that indicated on the appliance. Your appliance has to operate with an earthed plug. It is a class I appliance. Before switching on your appliance, make sure that: - the appliance is positioned in accordance with these instructions, 7

8 EN - the air inlet and outlet grills are completely unobstructed, - the appliance is placed on a flat and stable surface. - the tank float (7 Fig.1) moves freely in its housing. Plug the lead in and press the start button (A). On the display, the pictogram (L) appears indicating the temperature and relative humidity of the room, Your appliance starts up in continuous operation. You can also define the mode you want to use by selecting the functions described in the following section. After switching off using the OFF button (without unplugging), when the appliance is switched on it automatically starts in the previous configuration. OPERATION HUMIDITY CONTROL Function To set the target relative humidity, select one of the values, 70%, 60% or 50%, using the button (B). If the 70% function is selected, this means that the air will be dehumidified until the relative humidity falls to 70%. The appliance with regulate automatically if the relative humidity is below 70% (the compressor will stop but the fan will continue to operate). The compressor will start again if the relative humidity exceeds 70%. The same applies if 60% or 50% is selected. CONTINUOUS Function The unit dehumidifies the room continuously if the CONTINUOUS function (O) is activated using button (B), regardless of the ambient humidity. SPEED Function Press button (C) to select: : gentle ventilation : high ventilation TIMER Function This function allows you to define an operating time for your appliance from 1 to 24 hours in preset conditions: Temperature and humidity of the room Blue lignt on Timer Speed Humidity 8

9 With your appliance switched on you can define: - The ventilation speed (button C) - The target humidity rate (button B) EN And on models DH4116, DH4120 and DH4130, select: - The drying clothes function (button D) - The Swing function (button E) => Then select the number of hours of operation required before automatic shutdown by pressing the PROG/TIMER" key (F). The indicator light (G) will be lit up for the entire duration of the programmed operation. The appliance will automatically switch off at the end of the selected time. PLEASE NOTE: the appliance will regulate itself automatically to maintain the target humidity rate during the period of operation. If you wish to exit the program, select 00 H or stop the appliance with button A; the light will switch off. Fonction PROG This function allows you to set your appliance for deferred start-up from 1 to 24 hours in previously defined conditions. Temperature and humidity of the room Blue lignt on Prog Speed Humidity With your appliance switched off, press the "PROG/TIMER" key (F) as many times as necessary to define the number of hours before automatic start-up. Your appliance is programmed for continuous start-up but, at your convenience, you can also select: - The speed (button C) - The target humidity rate (button B) And on models DH4116, DH4120 and DH4130: - The drying clothes function (button D) - The Swing function (button E) The indicator light (G) will be lit up awaiting automatic operation of the appliance. PLEASE NOTE: the appliance will regulate itself automatically to maintain the target humidity rate during the period of operation. If you wish to exit the program, select 00 H or start the appliance with button A; the light will switch off. DRY Function for Drying clothes (Mod. DH4116, DH4120 & DH4130) Press the DRY (D) button to start the clothes drying function. Continuous dehumidification and swing of the air outlet vent will start up automatically for enhanced clothes drying. 9

10 EN SWING Function (Mod. DH4116, DH4120 & DH4130) Press the SWING" button (E): the air outlet vent will automatically swing, providing enhanced distribution of dry air around the room. DEFROSTING INDICATOR LIGHT If light (I) comes on, the dehumidifier is in defrosting mode. The compressor shuts down and will start up again automatically after the defrosting phase. NOTE: Check that the pre-filter is clean. FULL indicator light The appliance beeps and the indicator (H) flashes when the tank is full or incorrectly positioned. The indicator stops flashing and the dehumidifier starts up again once the tank is emptied and replaced. FILTER It is essential to switch off your appliance using button (A) and to unplug it before any operation. - Your appliance is fitted with a removable cleanable pre-filter/nano which must be cleaned regularly. - Remove the pre-filter/nano (Fig.3) and clean it with a vacuum cleaner. - Re-fit the pre-filter/nano (Fig.4-5). - Never use the appliance without its pre-filter/nano. EMPTYING THE TANK It is essential to switch off your appliance using button (A) and to unplug it before any operation. When the tank is full: - The appliance shuts down and the red FULL indicator light (H) comes on - Remove the tank gently from the appliance (Fig.6), empty the water and put the tank back into the appliance. The red FULL indicator light (H) should switch off in a few seconds. CONTINUOUS DRAINAGE (see Fig 7). It is essential to switch off your appliance using button (A) and to unplug it before any operation. Use a PVC pipe, 12 mm in diameter. - Remove the plug (13) then connect the pipe to the drainage outlet. - Ensure that the slope between the 2 ends of the pipe allows water to flow away normally. CARE It is essential to switch off your appliance using button (A) and to unplug it before any cleaning operation. It can be cleaned with a damp cloth. Clean the water tank regularly. Clean the air inlet pre-filter regularly. Important : Never use abrasive cleaners, these will damage the surfaces. TRANSPORT Drain the tank before transport. The appliance is easy to move, thanks to its rollers. Note : Your appliance includes a refrigeration compressor; laying the appliance on its side can cause a malfunction. 10

11 STORAGE EN When the appliance is not in use, it must be stored in a dry place. Take care to empty the water tank. TECHNICAL CHARACTERISTICS CHARACTERISTICS DH4116 / DH4110 DH4120 DH4130 Voltage and frequency V / 50Hz V / 50Hz V / 50Hz Power (W) (30 C RH 80%) 240W 310 W 430 W Humidity absorption capacity (L/day) (30 C, RH 80%) 16 L 20 L 25 L Humidity absorption capacity (L/day) (26,7 C, RH 60%) DH4116 : 8 L DH4110 : 8,2 L 12 L 14,8 L Weight (kg) 12,9kg 14kg 14,5kg Ambient temperature ( C) 10 C - 35 C 10 C - 35 C 10 C - 35 C Refrigerant / weight R134A (165g) R134A (195g) R410A (180g) Pre-filter/nano Tank capacity (L) 5L 5L 5L Dimensions (cm) L33 x D42 x H65 L33 x D42 x H65 L33 x D42 x H65 Noise level - db(a)* DH4116 : 52 db(a) DH4110 : 47 db(a) 52 db(a) 52 db(a) *(on low speed under specific operating conditions) 11

12 EN IN CASE OF PROBLEM Type of problem The appliance does not work when switched on. The dehumidification capacity is too low. The desired level of comfort is not reached after the appliance has been operating for a long time. The appliance is too noisy. The appliance stops. The full indicator light is on. The appliance freezes. The air outlet vent does not open. (Mod. DH4116, DH4120, DH4130) Points to check - Water tank full. - Positioning of the tank. - Connection of the appliance. - That the filter is clean. - The temperature is too low. - Obstruction of the air inlet and outlet grills. - Doors and windows are closed. - That the filter is clean. - Source of steam in the room. - Size of room too large. - The appliance is placed on a flat and stable surface. - Water tank full or not in place. - Temperature too high or too low. - Bad humidity setting. - In case of first use, water tank not in place. - Water tank is full. - Check filter is clean. - Room temperature too low. - Clear the air inlet and outlet grilles. - Vent blocked on opening => Switch off and restart appliance Never dismantle your appliance. A poorly repaired appliance may pose risks to the user. Before contacting an approved Service Centre in our network, ensure that the appliance is in a normal operating position and that the air inlet and outlet grills are completely unobstructed. ENVIRONMENT PROTECTION FIRST! Your appliance contains valuable materials which can be recovered or recycled Models DH4110, DH4116, DH4120 also contain a fluorinated greenhouse gas as a cooling agent (R134A) under the Kyoto Protocol, whose global warning capacity is 1300 times higher than carbon dioxide (CO2). Model DH4130 also contains a fluorinated greenhouse gas as a cooling agent (R410A) under the Kyoto Protocol, whose global warning capacity is 1975 times higher than carbon dioxide (CO2). The fluorinated greenhouse gas contained in this appliance must not be released into the atmosphere. Leave it a local civic waste collection point. 12

13 閱讀說書並請冊 ZH 產說動 3. 氣柵 ( 號 DH4110) 氣動 ( 號 DH4116 號 DH4120 號 DH4130) 檢視蓋 8. 標 9. 滾輪 10. 預網穩 11. 預網潔 12. 進氣柵 13. 開 13

14 ZH 說 DH 號 G F J L M H I A N O B C DH 號 DH 號 DH 號 G F J L M H I A - 開關 B - 對濕選鈕 C - 選鈕 D - 鈕 ( 號 DH4116 號 DH4120 號 DH4130) E - 轉鈕 ( 號 DH4116 號 DH4120 號 DH4130) F - / 時間鈕 G - / 時間顯燈 H - 滿顯燈 I - 動顯燈顯 A D E P K N O B C J - 時間顯 ( 時間 ) K - 選擇 ( 號 DH4116 號 DH4120 號 DH4130) L - 顯間溫對濕 M - 選兩種 N - 對濕數 50% 60% 70%( 濕 ) O - 續濕顯燈 P - 氣轉 ( 動號 DH4116 號 DH4120 號 DH4130) 14

15 ZH 裏氣濕過會產濕機懸氣為濕氣護環濕壞 ( 號 DH4116 號 DH4120 號 DH4130) 濕機備淨濕對濕顯對濕顯溫氣夠納佔對濕濕計來對濕 <50% 內氣對濕 50 % 60% 間這對濕 >60% 氣濕 - 風統將氣卻發發將氣溫餘釋氣 - 氣經過溫彌間 - 經過會經將濕機內濕為處適當濕應該將濕機須讓氣動將濕機礙請濕機 10 (4 吋 ) 間 15

16 ZH 須細閱讀這並議為確濕機適標準規 ( 電壓電 ) 濕機並業當導損壞將會塵發災環濕機請檢濕機電線頭狀態將濕機 ( 針 ) 電線損毀製認務備資換發險濕機並體關經驗識這類電 ( 兒 ) 們負責監產給產歲兒關經驗識體們確監獲關濕機並當險兒監產確會將戲兒沒監潔養產電線濕機從牆頭須將電線卻劑須關規則極項蓋氣氣柵擋氣 ( 號 DH4116 號 DH4120 號 DH4130) 氣閉時濕機 ( 號 DH4116 號 DH4120 號 DH4130) 強將氣轉 ( 號 DH4116 號 DH4120 號 DH4130) 濕時觸濕機濕機應觸鈕濕機請將濕機穩將兒濕機東內電線調鈕 (A) 關濕機動濕機請關機電線長時間調鈕 (A) 關濕機電線 IPX2 設計濕機處濺 ( 廚 ) 濕機間電裝濕機貴國標準 16

17 開 ZH 濕機請檢電壓濕機顯電壓濕機須頭濕級電開動濕機須確 - 濕機說書 - 氣柵氣柵沒點 - 濕機穩 - 標 (7 圖 1) 內動電動開鈕 (A) 顯會現圖 (L) 顯間溫對濕濕機啟動會續選設關 ( OFF) 關濕機 ( 無電線 ) 濕機啟動會動開設濕設標對濕請鈕 (B) 選擇個數 70% 60% 50% 選 70% 會將氣減對濕 70% 對濕 70%, 濕機會動調節 ( 壓縮會頓風會繼續 ) 當濕過 70% 壓縮會啟動選 60% 50% 況樣續鈕 (B) 啟動續 CONTINUOUS) (O) ( 則圍濕濕機會續間濕動鈕 (C) 選 : 輕風 : 強風 17

18 ZH 時間這項設濕機預 1 24 設時間溫濕藍燈時間啟動濕機設 - 風 ( 鈕 C) - 標濕 ( 鈕 B) 號 DH4116 號 DH4120 號 DH4130 選 - ( 鈕 D) - 轉 ( 鈕 E) 動 / 時間 (PROG/TIMER) 鍵 (F) 選擇動關機時數設間顯燈會 (G) 選時間結濕機會動關請濕機會動調節間將濕維標請選 00 H 鈕 A 頓濕機顯燈會滅濕設遲 1 24 時開預設間溫濕藍燈濕 18

19 關濕機據動 / 時間 (PROG/TIMER) 鍵 (F) 無數選擇個時過動開機濕機經設續為選 - ( 鈕 C) - 標濕 ( 鈕 B) 號 DH4116 號 DH4120 號 DH4130 選 - ( 鈕 D) - 轉 ( 鈕 E) 顯燈 (G) 會濕機動開請濕機會動調節間將濕維標請選 00 H 鈕 A 頓濕機顯燈會滅 ( 號 DH4116 號 DH4120 號 DH4130) 動鈕 )(DRY) 開濕機會續濕氣會動轉點轉 ( 號 DH4116 號 DH4120 號 DH4130) 動轉鈕 )(SWING) (E 氣會動轉氣佈間顯燈顯燈 (I) 濕機進壓縮會關濕機會動開檢預網潔滿顯燈當滿當濕機會鳴響顯燈會閃動 (H) 顯燈閃動時濕機會開動濾網進須調鈕 (A) 關濕機電線 - 濕機裝預網預網潔須潔 - 預網圖機塵潔 - 裝預網圖圖 - 預網濕機進須調鈕 (A) 關濕機電線當滿 - 濕機會關紅滿顯燈 (H) 會 - 將輕輕離濕機 ( 圖 6) 將紅滿顯燈 (H) 會數內滅 ZH 19

20 ZH 續 ( 圖 7) 進須調鈕 (A) 關濕機電線徑 12 (PVC) - 頭 (13) 將 - 確兩間夠讓護進潔調鈕 (A) 關濕機電線濕潔濕機須潔進氣預網須潔潔為會損壞運運須濕機裝滾輪動濕機裝卻壓縮側會導靈時須將濕機術點點 DH4116 / DH4110 DH4120 DH4130 電壓頻 V / 50Hz V / 50Hz V / 50Hz (W) 240W 310W 430W 濕 ( / ) 30 C 對濕 80% 濕 ( / ) 26.7 C 對濕 60% DH4116 : 8 DH4110 : ( ) 圍溫 ( C) 10 C - 35 C 10 C - 35 C 10 C - 35 卻劑 / ( 卻劑 / ) 卻劑 -134a / 165 卻劑 -134a / 195 卻劑 -410a / 180 濾網 ( ) 體積 ( ) 長 33x 42 x 65 長 33x 42 x 65 長 33x 42 x 65 ( 貝 ) DH4116 : 52 貝 DH4110 : 47 貝 52 貝 52 貝 *( 況 ) 20

21 問題 ZH 開濕機維當會對構險聯絡們務網認務請確濕機時擺確進氣柵氣柵沒點問題類濕機開動無運濕濕機長時間還達適濕濕機發過聲響濕機頓滿顯燈濕機結氣開 ( 號 DH4116 號 DH4120 號 DH4130) 檢點 - 滿 - 擺確 - 電 - 濾網潔 - 溫 - 進氣柵氣柵 - 門關 - 濾網潔 - 間來 - 間 - 濕機穩 - 滿擺確 - 溫過過 - 濕設當 - 應該擺確 - 滿 - 濾網潔 - 間溫過 - 潔進氣柵氣柵 - => 關機開機護環為! 濕機環寶貴號 DH4110 號 DH4116 號 DH4120 採種議書為溫氣體氣體為卻劑 (R134A) 碂 1300 號 DH4130 種議書為溫氣體氣體為卻劑 (R410A) 碂 1975 將濕機溫氣體釋氣請將濕機廢 21

K301Q-D VRT中英文说明书141009

K301Q-D VRT中英文说明书141009 THE INSTALLING INSTRUCTION FOR CONCEALED TANK Important instuction:.. Please confirm the structure and shape before installing the toilet bowl. Meanwhile measure the exact size H between outfall and infall