UEYT F 級可焊聚胺酯漆包銅線 Class F Solderable Polyurethane overcoated with Nylon Enamelled Copper Wire 在 UEWT F 級可直焊漆膜外, 加上尼龍樹脂漆膜, 具有耐加工及耐劣化的特性 Covered with tw

Size: px

Start display at page:

Download "UEYT F 級可焊聚胺酯漆包銅線 Class F Solderable Polyurethane overcoated with Nylon Enamelled Copper Wire 在 UEWT F 級可直焊漆膜外, 加上尼龍樹脂漆膜, 具有耐加工及耐劣化的特性 Covered with tw"

斡蹒连
5 years ago
Views:

1 UEW 聚胺酯漆包銅線 Polyurethane Enamelled Copper Wire 這種線材是在導體表面烤上絕緣塗料, 其主要成份為聚胺酯樹脂 (PU resin), 經由多元醇 (Polyol) 與異氰酸鹽 (Isocyanate) 的架橋反應而成 This wire is coated and baked with varnish over the conductor. The insulation is mainly composed of polyurethane resin made with polyol cross-linked with isocyanate. 1. 泛用聚胺酯漆包銅線 2. 焊錫溫度約容易著色 ( 原紅綠藍 ) 4. 在高頻率下具有優良的誘電特性 1.This wire is most widely used in the market. 2.Solderable at Available in various colors.(normal, red, green, blue) 4.Excellent dielectric characteristics at hight frequencies. 適用標準 :JIS C 3202 聚胺酯漆包銅線 NEMA MW 75C IEC 用途 : 繼電器線圈小型馬達小型變壓器通訊設備用線圈 Applicable standard: JIS C 3202 NEMA MW75C IEC Applications: Relay coils, small motors, small transformers, coils for telecommunication equipment. 與製造範圍 Thermal class and range of manufacture ( ) UEW B(130) MW75C UEY 聚胺酯尼龍漆包銅線 Polyurethane overcoated with Nylon Enamelled Copper Wire 在絕緣的聚胺酯漆膜之外再覆蓋一層尼龍漆膜, 具耐加工及耐劣化特性 Covered with nylon resins over the polyurethane film, the double layered wire is highly resistant to deterioration caused by working. 2. 耐磨耗性耐熱衝擊和耐溶劑性均較 UEW 佳 2.Higher resistance to heat shock and solvents than UEW. 適用標準 :JCS2409 聚胺酯聚醯胺漆包銅線 NEMA MW28C IEC Applicable standard: JCS2409 NEMA MW28C IEC 與製造範圍 Thermal class and range of manufacture ( ) UEY B(130) MW28C SFBW F 級可焊漆包銅線 Class F Solderable Enamelled Copper Wire UL F 級 155 認可 The wire has been approved by UL for ). Class F ( 介於聚胺酯 (PU) 與聚酯 (PE) 之間 3. 適合高頻線圈及馳返變壓器 (FBT) 一次用低壓卷線 4. 可著色 ( 原紅綠藍 ) 1.Ranks between polyurethane and polyester in heat resistance. 2.Solderable at Suitable for high frequency fly back transformer as the first low voltage coils. 4.Colorable(Normal, red, green, blue). 適用標準 :JCS2394 可直焊漆包銅線 NEMA MW79C IEC 用途 : 耐熱性較高之小馬達馳返變壓器 Applicable standard: JCS 2394 NEMA MW79C IEC Applications: Small motors, fly back transformers. 與製造範圍 Thermal class and range of manufacture SFBW F(155) MW79C SFBY F 級可焊尼龍漆包銅線 Class F Solderable overcoated with Nylon Enamelled Copper Wire 在 SFBW 耐熱可直焊性漆膜外再覆蓋尼龍樹脂漆膜, 具有耐加工及耐劣化的特性 Covered with nylon resins over the class F solderable film, the double layered wire is highly resistant to deterioration caused by working. 1. 尼龍層使得表面平滑, 適合自動機械的卷線作業 2. 耐磨耗性耐熱衝擊和耐溶劑性均較 SFBW 佳 3. 可著色.( 原紅綠藍 ) 2.Higher resistance to heat shock and solvents than SFBW. 3.Colorable(Normal, red, green, blue). 適用標準 :JCS2394 可直焊漆包銅線 NEMA MW80C 用途 : 耐熱小馬達小型變壓器 Applicable standard: JCS 2394 NEMA MW80C IEC 與製造範圍 Thermal class and range of manufacture SFBY F(155) MW80C

2 UEYT F 級可焊聚胺酯漆包銅線 Class F Solderable Polyurethane overcoated with Nylon Enamelled Copper Wire 在 UEWT F 級可直焊漆膜外, 加上尼龍樹脂漆膜, 具有耐加工及耐劣化的特性 Covered with two layers of film-nylon resins over UEWT class F solderable insulation, this wire is highly resistant to deterioration caused by working. 1. 尼龍層使得表面平滑, 更適合自動機械的卷線作業 2. 耐磨耗性耐熱衝擊和耐溶劑性均較 UEWT 為佳 2.Higher resistance to heat shock and solvents then UEWT. 適用標準 :JCS2394 可直焊漆包銅線 NEMA MW80C 用途 : 環型線圈小型馬達小型線圈 Applicable standard: JCS 2394 NEMA MW80C IEC Applications: Toroidal coils, small motors, small coils. 與製造範圍 Thermal class and range of manufacture UEYT F(155) MW80C PEW 聚酯漆包銅線 Polyester Enamelled Copper Wire 這種線材的絕緣漆膜, 其主要成份是經由二羧酸 (Di-carboxylic acid) 和多元醇 (Polyol) 的聚縮合反應而成之聚酯樹脂 (PE resin) The wire is insulated with a varnish which is mainly composed of polyester resin made from the polycondensation of di-carboxylic acid and polyvalent alcohol. 1. 為 F 級優良的耐溶劑性 3. 耐水解性不佳, 應用於密封式的儀器時須注意 1.Thermal class rated at class F Excellent resistance to solvents and abrasion. 3.Care should be taken when applying to sealed apparatus. 適用標準 :JIS C 3202 聚酯漆包銅線 NEMA MW5C IEC 用途 : 一般用馬達攜帶型發電機變壓器磁化線圈繼電器線圈 Applicable standard: JIS C 3202 NEMA MW5C IEC Applications: General purpose motors. portable generators, transformer, solenoids relay coils. 與製造範圍 Thermal class and range of manufacture PEW F(155) MW5C PEY 聚脂尼龍漆包銅線 Polyester overcoated with Nylon Enamelled Copper Wire 這種銅線是在聚酯層漆膜的外面再覆蓋一層尼龍漆膜 This double layered wire is covered with nylon resin over polyester resin. 2. 耐磨耗性耐熱衝擊和耐溶劑性均較 PEW 佳 2.Higher resistance to heat shock and solvents than PEW. 適用標準 :JCS 2393 NEMA MW24C Applicable standard: JCS C 2393 NEMA MW24C. 與製造範圍 Thermal class and range of manufacture PEY F(155) MW24C 0.10 LSFFW F 級低溫可焊聚胺酯漆包銅線 Class F Low Temperature Solderable Polyurethane Enamelled Copper Wire 這種線材的焊錫溫度比一般 F 級可焊漆包銅線為低, 適用於細線 This wire can be soldered at temperature lower than those for ordinary class F solderable polyurethane enamelled copper wire. 1. 與聚酯漆包銅線同等時可用於 2 秒內完成焊錫作業 4. 適合細線向之半田作業 ( 焊錫工程 ) 1.LSFFW is equal to polyester enamelled copper wire in thermal class. 2.Can be soldered at 340i n 2 seconds. 3.Colorable (normal, red, green, blue). 4.Suitable for fine wire. 適用標準 :JCS 2394 可直焊漆包銅線 NEMA MW79C IEC Applicable standard: JCS 2394 NEMA MW79C IEC 與製造範圍 Thermal class and range of manufacture LSFFW F(155) MW79C

3 LSFFY F 級低溫可焊聚胺酯尼龍漆包銅線 Class F Low Temperature Solderable Polyurethane overcoated with Nylon Enamelled Copper Wire 在 LSFFW 耐熱可直焊漆膜外, 加上尼龍樹脂漆膜, 具有耐加工及耐劣化的特性 Covered with two layers of film-nylon resin over Class F low temperature solderable polyurethane insulation, this wire is highly resistant to deterioration caused by wording. 2. 耐磨耗性耐熱衝擊和耐溶劑性較 LSFFW 佳 2.Higher resistant to heat shock and solvents than LSFFW. 3.Colorable (normal, red, green, blue). 適用標準 :JCS 2394 可直焊漆包銅線 NEMA MW80C Applicable standard: JCS 2394 NEMA MW80C IEC 與製造範圍 Thermal class and range of manufacture LSFFY F(155) MW80C UEWF F 級可焊漆包銅線 Class F Solderable Enamelled Copper Wire UL F 級 155 認可 The wire has been approved by UL for class ). F ( 為 F 級 Thermal class is rated Class F, Solderable at Colorable (Normal, red, green, blue). 適用標準 :JCS 2394" 可直焊漆包銅線 " NEMA MW79C IEC 用途 : 馬達變壓器 Applicable standard: JCS 2394 NEMA MW79C IEC Applications: Motors, transformers. 與製造範圍 Thermal class and range of manufacture UEWF F(155) MW79C UEYF F 級可焊尼龍漆包銅線 Class F Solderable overcoated with Nylon Enamelled Copper Wire UL F 級 155 認可 The wire has been approved by UL for class ). F ( 尼龍層使得表面平滑, 適合自動機械的卷線作業 2. 耐磨耗性耐熱衝擊和耐溶劑性均較 UEWF 佳 2.Higher resistance to heat shock and solvents than UEWF. 適用標準 :JCS 2394" 可直焊漆包銅線 " NEMA MW80C 用途 : 馬達變壓器 Applicable standard: JCS 2394 NEMA MW80C IEC Applications: Motors, transformers. 與製造範圍 Thermal class and range of manufacture UEYF F(155) MW80C SFHW H 級可焊聚胺酯漆包銅線 Class H Solderable Polyurethane Enamelled Copper Wire H 級, 可直焊的漆包銅線 This kind of class H polyurethane enamelled copper wire is solderable. 1. 為 H 級焊錫溫度在 Thermal class is rated at Class H, Solderable at Colorable (normal, red, green, blue). 適用標準 :JCS 2394 可直焊漆包銅線 NEMA MW82C IEC Applicable standard: JCS 2394 NEMA MW82C IEC 與製造範圍 Thermal class and range of manufacture SFHW H(180) MW82C 1.80

4 SFHY H 級可焊聚胺酯尼龍漆包銅線 Class H Solderable Polyurethane Overcoated with Nylon Enamelled Copper Wire 在 H 級可直焊漆膜外, 加上尼龍樹脂漆膜, 具有耐加工及耐劣化的特性 Covered with two layers of film-nylon resion over Class H solderable polyurethane insulation, this wire is highly resistant to deterioration caused by working. 2. 耐磨耗性耐熱衝擊和耐溶劑性均較 SFHW 佳 3. 可著色 ( 原紅綠藍 ) 2.Higher resistant to heat shock and solvents than SFHW. 3.Colorable (normal, red, green, blue). 適用標準 :JCS 2394 可直焊漆包銅線 NEMA MW83C Applicable standard: JCS 2394 NEMA MW83C. 與製造範圍 Thermal class and range of manufacture SFHY H(180) MW83C 1.80 UEWH H 級可焊聚胺酯漆包銅線 Class H Solderable Polyurethane Enamelled Copper Wire H 級, 焊錫性優異的漆包銅線 This kind of class H Polyurethane enamelled copper wire, and it is with excellent solderability. 1. 為 H 級 Thermal class is rated Class H, Solderable at. 400 適用標準 :JCS 2394" 可直焊漆包銅線 " NEMA MW82C IEC Applicable standard: JCS 2394 NEMA MW82C IEC 與製造範圍 Thermal class and range of manufacture UEWH H(180) UEYH H 級可焊聚胺酯尼龍漆包銅線 Class H Solderable Polyurethane overcoated with Nylon Enamelled Copper Wire 在 UEWH 漆膜外, 加上尼龍樹脂漆膜, 具有耐加工及耐劣化的特性 Covered with two layers of film-nylon resin over UEWH insulation, this wire is highly resistant to deteioration caused by working. 1. 尼龍層使得表面平滑, 適合自動機械的卷線作業 2. 耐磨耗性耐熱衝擊和耐溶劑性均較 UEWH 佳 2.Higher resistance to heat shock and solvents than UEWH. 適用標準 :JCS 2394" 可直焊漆包銅線 " NEMA MW83C IEC Applicable standard: JCS 2394 NEMA MW83C IEC 與製造範圍 Thermal class and range of manufacture UEYH H(180) UEWHS H 級可焊聚胺酯漆包銅線 Class H Solderable Polyurethane Enamelled Copper Wire H 級, 耐濕熱性優異的漆包銅線 This kind of class H Polyurethane enamelled copper wire, and it is with excellent resistance to damp and heat. 1. 為 H 級 Thermal class is rated Class H, Solderable at 400. 適用標準 :JCS 2394" 可直焊漆包銅線 " NEMA MW82C IEC Applicable standard: JCS 2394 NEMA MW82C IEC 與製造範圍 Thermal class and range of manufacture UEWHS H(180)

6 EIW 聚酯亞胺漆包銅線 Polyesterimide Enamelled Copper Wire 這種線材中絕緣漆膜的主要成份為異三聚氰酸系 (Isocyanuric) 之聚酯亞胺樹脂 (El resin) This wire is enameled with insulating varnish, whose main ingredient is isocyanuric polyesterimide resin. 1. 同時具有優良的電氣化學機械特性 2. 提升到 200 以上, 被廣泛使用在耐熱的電子儀器上 3. 可能會發生龜裂 1.Excellent electrical, chemical and mechanical properties that are well-balanced. 2.Thermal class is rated up to, 200the w ire is w idely used for electrical apparatuses which require heat resistance. 3.May develop cracking. 適用標準 :JIS C 3202 聚酯亞胺漆包銅線 NEMA MW74C 用途 : 耐熱一般用馬達汽車零件變壓器 Applicable standard: JIS C 3202 NEMA MW74C. Applications: Heat-resistant general-purpose motors, automotive parts, transformers. 與製造範圍 Thermal class and range of manufacture ( ) EIW 200 MW74C 0.10 EIAIW 聚脂亞胺聚醯胺亞胺漆包銅線 Polyesterimide overcoated with Polyamideimide Enamelled Copper Wire 這種線材有雙層漆膜, 在聚酯亞胺的外層加上聚醯胺亞胺 This wire has double layers of enamelled coatings-polyamideimide for upper layer and polyesterimide for lower layer. 1. 改善 EIW 發生紋裂的情形, 有優良的耐熱特性, 將提高到良好的耐冷媒性及耐磨耗性 1.Improved version of polyesterimide enameled copper wire (EIW) with cracking kept to a minimun. Excellent thermal class is. up to Excellent resistance to refrigerants and abrasion. 適用標準 :JCS 2392 聚酯亞胺聚醯胺亞胺漆包銅線 NEMA MW35C MW73C IEC 用途 : 耐熱線圈變壓器耐熱馬達 Applicable standard:jcs 2392 NEMA MW35C MW73C IEC Applications: Heat-resistant coils and motors, transformers. 與製造範圍 Thermal class and range of manufacture ( ) MW35C EIW 200 MW73C AIW 聚醯胺亞胺漆包銅線 Polyamideimide Enamelled Copper Wire 這種線材中絕緣漆膜的主要成份為聚醯胺亞胺樹脂 This wire is coated with an insulating varnish whose main ingredient is polyamideimide resin. 1. 耐熱性耐磨耗性耐冷媒性均高於 EIW 2. 提高到 220, 耐超負荷特性良好在對於耐熱的電子設備上, 可安心使用 1.Higher resistance to heat, abrasion and refrigerant than the EIW wire. 2.With resistance to heat up to 220 and high resistance to overload, the wire can be sefely used for electrical apparatus which requires heat-resistance. 適用標準 :JCS 334A 聚醯胺亞胺漆包銅線 NEMA MW81C IEC 用途 : 耐熱馬達電動工具用馬達耐熱 (H 級 C 級 ) 乾式變壓器電感線圈 Applicable standard: JCS 334A NEMA MW81C IEC Applications: Heat-resistant motors, motors for electric tools. Heat-resistant dry type transformers, lifting magnet coils. 與製造範圍 Thermal class and range of manufacture ( ) AIW 220 MW81C 2.30 PIW 聚醯亞胺漆包銅線 Polyimide Enamelled Copper Wire 最近在耐熱馬達及航空用電氣設備上, 日益需求提升耐熱性, 因此開發出聚醯亞胺漆包銅線 Recently, higher heat resistance has been increasingly required for heat-resistant motors and electrical equipment of aircraft.to meet this requirement, polyimide enamelled copper wire has been developed. 1. 提高到有機材料中耐熱性最高的線材 1.Thermal class up to Highest heat resistance among organic coated wires. 適用標準 :NEMA MW16C IEC 用途 : 耐熱馬達汽車零件變壓器 Applicable standard: NEMA MW16C IEC Applications: Heat-resistant motors, automotive parts, transformers. 與製造範圍 Thermal class and range of manufacture ( ) PIW

7 特性對照表 Comparative Table- 有關表面處理除自滑線外, 漆膜本身滑性不佳為了有利於卷線加工作業, 因此漆膜表面需要滑性處理表面處理之種類分為下列兩種 :. 一般滑劑 : 適用於一般用途的漆包銅線. K 處理劑 : 適用於高滑性的漆包銅線請依照卷線機的類型, 選擇適用的表面處理 Surface Treatment Except the smooth surface coating, the films of magnet wires lack lubricity making it impossible to wind wires into coils. Therefore, the wire surface is treated for smoothness in two ways. General type: for general purposes K type: for further smoothness The kind of treatment should be selected according to the type of coil winding machine used. 部 Product thermal Class UL Recognized UEW B(130 ) MW75C UEY B(130 ) MW28C SFBW F(155 ) MW79C SFBY F(155 ) MW80C UEYT F(155 ) MW80C PEW F(155 ) MW5C PEY F(155 ) MW24C LSFFW F(155 ) MW79C LSFFY F(155 ) MW80C UEWF F(155 ) MW79C UEYF F(155 ) MW80C SFHW H(180 ) MW82C SFHY H(180 ) MW83C UEWH H(180 ) UEYH H(180 ) UEWHS H(180 ) UEYHS H(180 ) SFEIW H(180 ) MW77C UEWCS 200 UEYCS 200 EIW 200 MW74C EIAIW 200 MW35C MW73C 直焊性 Solderability 焊錫溫度 : Solderable at 焊錫溫度 : Solderable at 焊錫溫度 : Solderable at 焊錫溫度 : Solderable at 焊錫溫度 : Solderable at 特長 Features 泛用聚胺酯漆包銅線 Polyurethane enamelled copper wire is used commonly. 泛用聚胺酯漆包銅線外層加上尼龍漆膜, 耐磨性佳 F 級可焊漆包銅線 Class F solderable enamelled copper wire. F 級可焊漆包銅線外層加上尼龍漆膜, 耐磨性佳外層加上尼龍漆膜, 耐磨性佳一般用途的聚酯漆包銅線優良的耐溶劑性 Polyester enamelled copper wire is used Excellent resistance to solvents. commonly. 聚酯漆包銅線外層加上尼龍漆膜, 耐磨性佳 Nylon overcoat reduces deterioration caused by working. 焊錫溫度 : Solderable at 焊錫溫度 : Solderable at 焊錫溫度 : Solderable at 焊錫溫度 : Solderable at 焊錫溫度 : Solderable at 焊錫溫度 : Solderable at 焊錫溫度 : Solderable at 焊錫溫度 : Solderable at 焊錫溫度 : Solderable at 焊錫溫度 : Solderable at 焊錫溫度 : Solderable at 焊錫溫度 : Solderable at 焊錫溫度 : Solderable at Thermal class is 200 雙層絕緣漆膜, 在 EI 外層加上 AI Two layers of coat, EI and AI. 優良的耐溶劑性. Excellent resistance to solvents. F 級低溫可焊聚胺酯漆包銅線 Class F low temperature solderable polyurethane enamelled copper wire. F 級低溫可焊聚胺酯漆包銅線外層加上尼龍漆膜, 耐磨性佳 F 級可焊漆包銅線 Class F solderable enamelled copper wire. F 級可焊漆包銅線外層加上尼龍漆膜, 耐磨性佳 H 級可焊聚胺酯漆包銅線 Class H solderable polyurethane enamelled copper wire. H 級可焊聚胺酯漆包銅線外層加上尼龍漆膜, 耐磨性佳 H 級可焊聚胺酯漆包銅線 Class H solderable polyurethane enamelled copper wire. H 級可焊聚胺酯漆包銅線外層加上尼龍漆膜, 耐磨性佳 H 級可焊聚胺酯漆包銅線 Class H solderable polyurethane enamelled copper wire. H 級可焊聚胺酯漆包銅線外層加上尼龍漆膜, 耐磨性佳耐熱性比 SFHW 為高 Higher heat resistance than SFHW. 200 級可焊聚胺酯漆包銅線 00 solderable polyurethane enamelled copper wire. 200 級可焊聚胺酯漆包銅線外層加上尼龍漆膜, 耐磨性佳被廣泛使用在耐熱的電子儀器設備上 Widely used for various heat resistance electrical apparatures. 良好的耐冷媒性及耐磨耗性 Excellent resistance to refrigerant and abrasion. AIW 220 MW81C PIW 240 提高到 220 With resistance to heat up to 220 提高到 240 以上 Thermal class is up to 240 耐熱性耐冷媒性和耐磨耗性均高於 EIW Excellent resistance to heat, refrigerant and abrasion. 有機材料中耐熱性最高的線材 Highest heat resistance among organic coated wires.

Wire Wound Ceramic Chip Inductor 繞線式陶瓷晶片大电流電感 HPWS Series for High Frequency HPWS 系列適用於高頻 INTRODUCTION 產品介紹 The HPWS is the chip inductors of a wire w

Wire Wound Ceramic Chip Inductor 繞線式陶瓷晶片大电流電感 HPWS Series for High Frequency HPWS 系列適用於高頻 INTRODUCTION 產品介紹 The HPWS is the chip inductors of a wire w INTRODUCTION 產品介紹 The HPWS is the chip inductors of a wire wound type widely used in the communication applications, such as cellular phones, television tuners, radios, and other electronic devices. The