High Speed Precision Lathe Series 2013
1630GH,1643GH 1730GH,1743GH,1767GH 2030GH,2043GH,2076GH 完美的圓弧設計 美觀 耐用 精度持久 便利的操作 安全可靠 床身採用米漢納鑄鐵 熱處理及精密研磨 ( 硬度HS70 ) 可調整車身 橫送台單方給油或同時給油之分油器 自動兼手動之強制給油泵 潤滑範圍包括橫送台 車床滑動面 橫向滑板熱處理研磨 且熱處理浸油 Cross slide is hardened and ground to prolong operation life. Cross slide screw is hardened and oil bathed. 有安全裝置的起動停止把手 能瞬間停機的剎車裝置 Bed is made of meehanite and is hardened and precisely ground, Hardness is HS 70 degree. Automatic and manual forced Lubrication pump supplies oil to cross slide and bedways. Oil distributor may be adjusted to lubricate bedway, cross slide, or both. Starting lever with safety device. Emergency foot-operated braking system. CH-530x1100 此圖僅供參考 各機種不同 The photo is only for reference, depends on different model. CH-400x1100 1
High speed precision Lathe 可選用P5級主軸軸承 機種代號為HP 主軸箱 齒輪箱 床護 使用熱處理研磨一級齒輪 泵浦強 公 英制共用齒輪箱 齒輪經熱處 手動自動兩用泵浦 潤滑橫向滑座 制潤滑系統 可選用P5級主軸軸 理 床軌 進刀可調式 過負載裝置 承 機種代號為HP GEAR BOX 確保安全 inch and metric threads without the Apron is equipped with a manual HEADSTOCK Gear in the headsotck are treated by cementation and precisely ground. Forced lubrication system It offers a comprehensive range of APRON use of change gears. All gears in and automatic lubrication system. the gear box are hardened. is employed. HP Model with P5 grade spindle bearing is optional. It will keep cross slide ways and bedways clean and lubricated. The apron is equipped with an overload protection device to avoid machine damage. CH-430x1100 展示圖片包括選購品 The optional equipment is included on the picture. 2
Specifications (option) 項目 Item 16 17 20 容量 Capacity 主軸箱 Headstock 床面上旋徑 Swing over bed 406mm 432mm 532mm 鞍面上旋徑 Swing over carriage 238mm 268mm 368mm 凹口上旋徑 Swing over gap 580mm 610mm 710mm 從面板上算起凹口長度 Width of gap in front of face plate 150mm 兩心間距離 Distance between centers (A1-6,A2-6) 767, 1067, 1667mm 床面寬度 Width of bed 300mm 車刀台行程 Stroke of tool post 145mm 橫向滑座行程 Stroke of cross slide 265mm 主軸孔徑 Spindle bore 51mm 58mm (78mm)* 主軸孔及中心針斜度 Taper of spindle bore & center MT6xMT4 主軸鼻端 Spindle nose A1-6,D1-6 (A2-6)* 主軸速度變換數 Number of spindle speeds 8 12 主軸速度 Spindle speed (60HZ) 70,110,180,290, 430,690,1125, 1800rpm ø58mm:35,52,75,110,160,230,330, 490,650,950,1350,2000rpm ø78mm:29,43,62,90,130,190,275, 405,540,790,1120,1650rpm 進給變換數 Number of feeds 36 縱向進給範圍 Range of longitudinal feeds 公制 metric 0.07~0.50mm/rev 0.037~1.04mm/rev (P=6mm) 0.035~0.98mm/rev (4TPI) 橫向進給範圍 Range of cross feeds 1/2 縱向進給 Half of longitudinal feeds 螺紋和進給導螺桿直徑 Leadscrew diameter 35mm Threading & Feeds 導螺桿螺距 Leadscrew pitch 4TPI, P=6mm 英制螺紋範圍 Range of inch pitches 4~42TPI(36 Kinds) 2~72TPI(44 Kinds) 公制螺紋範圍 Range of metric pitches 0.4~7.0mm (36 Kinds) 0.2~14 mm(39 Kinds) 心軸移動量 Quill stroke 170mm 尾座心軸直徑 Quill diameter 60mm Tailstock 心軸斜度 Quill taper MT#4 馬達 主軸馬達 (30 分 ) Main motor (30 min.) 5HP (7.5HP)* Motor 切削液馬達 Coolant pump motor 1/8HP 機械尺寸 機械高度 Height 1400mm Machine 佔地面積 Floor space 2000,2300,2900 1000mm dimension 機械重量 Weight 1450,1550kgs 1500,1600,1800kgs 1600,1700,1900kgs 以上規格如有變更, 恕不另行通知 Specification are subject to change without notice. 標準配備及附件 9" MT6xMT4 (MT4) 2 5HP/4P 7" 9" Standard equipment & accessories Center sleeve MT6xMT4 Dead center (MT4) 2 PC Leveling screws Service kits & Tool box Main motor 5HP/4P 7",9" backplate Coolant system Multi-position length stop 特別配備及附件 (350mm) CH530 7.5HP/4P 78mm (CH430/530 ) Optional equipment & accessories Steady rest Follow rest Face plate (350mm) Turret micro carriage stop Taper turning attachment 3-jaw chuck 4-jaw chuck Work light Rear toolpost Main motor 7.5HP/4P Full length splash guard Drill attachment Spindle bore 78mm (for CH430/530) 3
CHD-22 x 31,56,87,116,157 CHD-26 x 31,56,87,116,157 CHD-30 x 31,56,87,116,157 400mm 寬床身 86mm 主軸孔 另有 104mm 長寬皆精密 勁道十足 三點支持主軸皆用P級斜度滾柱軸承 86mm主軸孔 主軸採用泵浦強制潤滑系統 合金鋼滲碳熱處理精密研磨一級齒輪 全國唯一橫向熱處理研磨 提高使用壽命3 倍以上 橫向螺桿也熱處理浸油 Cross slide is hardened and ground to prolong operation life. Cross slide screws is hardened and oil bathed Spindle is supported by three P grade taper roller bearings. Spindle bore is φ86mm. Forced lubrication system is employed by pump. Gear in headstock are made of chromium molybdenum steel, treated by cementation and precisely ground. 公 英制共用牙箱 並配有過負 荷折斷安全削 It offers a comprehensive range of inch and metric threads. Output shaft is designed with safety pin to protect gear box from damage. 4
Medium Precision Lathe 床護有自動泵浦潤滑縱 橫向 滑動面 並配有自動進刀扭力 調整裝置 床護加裝快送時 則為手動潤 滑給油裝置 Automatic and manual forced 床身為米漢納鑄鐵 熱處理及精密研磨 ( 硬度HS70 ) Bed is made of meehanite and is hardened and precisely ground,hardness is HS 70 degree. lubrication pump supplies oil to cross slide and bedways. Oil distributor may be adjusted to lubricated bedway. Cross slide, or both. 尾軸φ80mm滲碳熱處理研磨 並配1:1 及 1/4:1進給變換 鑽孔輕鬆 A large tailstock quill φ80mm is made of chromium molybdenum steel treated by cementation and then precisely ground. With 1:1 and 1/4:1 changeable feeds, it offers easy drilling. 5
Specifications 項目 Item 22 26 30 容量 Capacity 主軸箱 Headstock 螺紋和進給 Threading & Feeds 尾座 Tailstock 馬達 Motor 機械尺寸 Machine dimension 床面上旋徑 Swing over bed 560mm 660mm 760mm 鞍面上旋徑 Swing over carriage 340mm 445mm 548mm 凹口上旋徑 Swing over gap 797mm 892mm 990mm 從面板上算起凹口長度 Width of gap in front of face plate 270mm 兩心間距離 Distance between centers (A1-8,A2-8) 808, 1443, 2218, 2968, 3983mm 床面寬度 Width of bed 400mm 車刀台行程 Stroke of tool post 242mm 橫向滑座行程 Stroke of cross slide 400mm 主軸孔徑 Spindle bore 86mm (104mm)* 104mm 主軸孔及中心針斜度 Taper of spindle bore & center MT7xMT5 主軸鼻端 Spindle nose A1-8,D1-8 (A2-8,D2-8,D1-11)* A2-8,D2-8,D1-11 主軸速度變換數 Number of spindle speeds 12 主軸速度 Spindle speed (60HZ) 4P:13,20,30,47,70,105,150,230,340,530,800,1200rpm 6P: 8,13,20,31,47,70,100,150,230,350,530,800rpm 進給變換數 Number of feeds 36 縱向進給範圍 Range of longitudinal feeds 公制 metric 0.037~1.04mm/rev (P=6mm,12mm) 0.035~0.98mm/rev (4TPI,2TPI) 橫向進給範圍 Range of cross feeds 1/2 縱向進給 Half of longitudinal feeds 導螺桿直徑 Leadscrew diameter 45mm 導螺桿螺距 Leadscrew pitch 4TPI,P=6mm (2TPI,P=12mm) 英制螺紋範圍 Range of inch pitches 2~72TPI/44Kinds (1~42TPI/48Kinds) 公制螺紋範圍 Range of metric pitches 0.2~14mm/39Kinds (0.4~28mm/44Kinds) 心軸移動量 Quill stroke 250mm 心軸直徑 Quill diameter 80mm 心軸斜度 Quill taper MT#5 主軸馬達 (30 分 ) Main motor (30 min.) 10HP/4P 7.5HP/6P 切削液馬達 Coolant pump motor 1/8HP 機械高度 Height 1500mm 佔地面積 Floor space 2300,2900,3700,4500,5500 1200mm 機械重量 Weight 以上規格如有變更, 恕不另行通知 Specification are subject to change without notice. 2300,2400,2900, 3100,3600 kgs 2400,2500,3000, 3200,3700 kgs 2600,2700,3200, 3400kgs 10" (ø86 ) 12" (ø104 ) MT7xMT5 (MT5) 2, 10HP/4P 7.5HP/6P (CHD-760) 40~255mm 10",12" (2300,3000,4000) Standard equipment & accessories Center sleeve MT7xMT5 Dead center (MT5) 2 PCS Leveling screws, Service kits Main motor 10HP/4P 10" backplate Coolant system Multi-position length stop Rapid traverse for 2300, 3000,4000 (500mm) 190~405mm Optional equipment & accessories Spindle bore 104mm 12" backplate for ø104mm Follow rest Face plate (500mm) Turret micro carriage stop Taper turning attachment 4-jaw chuck Work light Steady rest 40~255mm Steady rest 190~405mm 10" 3-jaw chuck 12" 3-jaw chuck 6
CHR-33 x 80,120,159,198,238,277 CHR-40 x 80,120,159,198,238,277 HEAVY DUTY PRECISION LATHE CHR Series 旋徑 Swing 860~1020mm 兩心間距 Between centers 2000~7000mm 主軸孔徑 Spindle bore 104mm 主軸馬達 Spindle motor 20HP/4P, 15HP/6P 7
Specifications 項目 Item CHR-33 CHR-40 容量 Capacity 主軸箱 Headstock 螺紋及進給 Threading & Feeds 尾座 Tailstock 馬達 Motor 機械尺寸 Machine dimension 床面上旋徑 Swing over bed ø860mm ø1020mm 鞍面上旋徑 Swing over carriage ø610mm ø770mm 凹口上旋徑 Swing over gap ø1170mm ø1330mm 從面板算起凹口長度 Width of gap in front of face plate 360mm 兩心間距 Distance between centers 2050 3050 4050 5050 6050 7050mm 床面寬度 Width of bed 560mm 車刀台行程 Stroke of tool post 220mm 橫向滑座行程 Stroke of cross slide 540mm 主軸孔徑 Spindle bore ø104mm 主軸鼻端 Spindle nose A1-11 (D1-11 選購 Option) 主軸孔及中心針斜度 Taper of spindle bore & center MT7xMT5 主軸速度變換數 Number of spindle speeds 16 主軸速度 Spindle speed (4P, 60HZ) 12 16 22 30 41 56 77 105 135 183 252 343 475 640 885 1200 rpm 8 11 17 20 27 37 51 70 主軸速度 Spindle speed (6P, 60HZ), 選購 Option 90 122 168 229 317 427 590 800 rpm 6 8 11 15 21 28 39 52 68 91 126 172 236 320 442 600 rpm 進給變換數 Number of feeds 90 細 Fine 0.012~0.044 (20) 縱向進給範圍普通 Normal 0.06~0.89 (40) range of longitudinal feeds (mm) 粗 Coarse 1.01~7.12 (30) 細 Fine 0.00048"~0.00168" (20) 縱向進給範圍普通 Normal 0.0024"~0.0337" (40) range of longitudinal feeds (inch) 粗 Coarse 0.0384"~0.2694" (30) 橫向進給範圍 Range of cross feeds 1/2 縱向進給 Half of longitudinal feeds 導螺桿直徑 Leadscrew diameter ø48mm 導螺桿螺距 Leadscrew pitch 2TPI P12 英制螺紋範圍 Range of inch pitches 2~28TPI (40) 粗牙 Coarse 5/8"~8" (16) 公制螺紋範圍 Range of metric pitches 1~14mm (31) 粗牙 Coarse 16~200mm (61) 心軸移動量 Quill stroke 280mm 心軸直徑 Quill diameter ø100mm (ø130mm 選購 Option) 心軸斜度 Quill taper MT#6 馬達 Main motor 20HP/4P (15HP/6P 選購 Option) 切削液馬達 Coolant pump motor 1/4HP 機械高度 Height 1400mm 佔地面積 Floor space 4200 5200 6200 7200 8200 9200mm x 1500mm 機械重量 Weight 以上規格如有變更恕不另行通知 Specification are subject to change without notice. 4700,5400,6600, 7300,8400,9400kgs 5000,5700,6900, 7600,8700,9700kgs 20HP/4P (S) MT#6 Standard Equipments and Accessories Main motor 20HP/4P Work light Steady rest with roller jaw(s) Tool box and Service kits Dead center MT#6 Leveling screws and Rapid traverse Foundation pads Coolant system Multi-position length stop 15HP/6P (L) 40~240mm Optional Equipments and Accessories 3-jaw manual chuck Steady rest with roller jaw(l) 4-jaw manual independent chuck Follow rest 40~240mm Main motor 15HP/6P Taper turning attachment 8
CHIN HUNG MACHINERY CO.,LTD. 670 UNION AVE, POMONA, CA 91768 10 TOLL FREE: NO.10,TIEN 1-877-4-ATRUMP SHIN (428-7867) STREET TEL : 886-4-25666113 25663114 TEL:(909) 623-6887 TA-YA, atrump@atrump.com TAICHUNG, TAIWAN http://www.kinwa-lathe.com FAX:(909) 922-7569 E-mail http://www.atrump.com : ufkinwa@ms15.hinet.net