FOR APPROVAL WE ARE PLEASED IN SUBMITTING YOU HEREWITH OUR SPECIFICATION, DRAWING TOGETHER WITH SAMPLES FOR YOUR APPROVAL. PLEASE RETURN TO US ONE COPY WITH YOUR AUTHORIZED SIGNATURES AS APPROVED. CUSTOMER : DESCRIPTION : 10/100/1000 BASE-T SINGLE PORT MAGNETICS MODULES PART NUMBER : HN18101CG ISSUE DATE : CUSTOMER S PART NUMBER APPROVED DATE APPROVED SIGNATURE TEL:886-2-86717511 FAX:886-2-86717611 REGISTERED OFFICE : No.491,Dade Rd.,Sanxia Dist.,New Taipei City 237,Taiwan
A. ELECTRICAL SPECIFICATIONS @25 Inductance OCL: 350uH Min @ 100KHz 0.2V 8mA DC BIAS Leakage Inductance: 0.50uH Max @ 100KHz 0.2V Interwinding Capacitance: 100PF TYP @ 100KHz 0.2V Turn Ratio: 1CT:1CT±5% Polarity: 1-18,3-16,5-14,7-12 In-Phase Insertion Loss: 1-100 MHz - 1.1dB Max Return Loss 0.5-30 MHz - 18.0dB Min 40 MHz - 14.4dB Min 50 MHz - 13.1dB Min 60-80 MHz - 12.0dB Min Cross Talk: 0.5-60 MHz - 40dB Min 60-100 MHz - 35dB Min DCMR 0.5-100 MHz - 30dB Min Isolation HI-POT: 1500VDC 10mA 1S Operating Temperature: 0 TO 70 Product Type: Green Product B. SCHEMATIC: 1 1CT:1CT 18 2 3 1CT:1CT 17 16 4 5 1CT:1CT 15 14 6 7 1CT:1CT 13 12 8 9 11 10
C. DIMENSIONS & MARKING: A B PIN1 Date Code HN18101CG E H M J C I K F D G Y PCB LAYOUT VIEW DIM A B C D E F G H I M J K Y MILLIMETERS(mm) INCHES(inch) MIN MAX MIN MAX 16.50 18.50 0.650 0.728 8.00 9.00 0.315 0.354 12.20(max) 0.480(max) 14.24(typical) 0.560(typical) 2.90 3.50 0.114 0.138 1.78(typical) 0.070(typical) 0.45(typical) 0.018(typical) 4.80(typical) 0.189(typical) 0.20 0.50 0.008 0.020 0.80(typical) 0.031(typical) 1.78(typical) 0.070(typical) 4.80(typical) 0.189(typical) 14.24(typical) 0.560(typical)
D. HAZARDOUS TEST REPORT: Test Item(s) Unit Method MDL Result Chromium VI(Cr+6) ppm As per US EPA 7196A and US EPA 3060A <100 <100 Cadmium(Cd) ppm ICP-AES after as per EN1122, method B:2001 or other acid digestion 2 N.D Mercury(Hg) ppm ICP-AES after as per US EPA 3052 or other acid digestion 2 N.D Lead(Pb) ppm ICP-AES after as per US EPA 3050B or other acid digestion <1000 <1000 PBBs(Polybrominated biphenyls)(cas NO:67774-32-7) % With reference to 83/264/EEC.Analysis Was Performed by GC/MS/ECD or HPLC/DAD/MS 0.0005 N.D PBBEs(PBDEs) (Polybrominated biphenyl ethers) % With reference to 83/264/EEC.Analysis Was Performed by GC/MS/ECD or HPLC/DAD/MS 0.0005 N.D NOTE: (1) N.D = Not detected(<mdl) (2) ppm = mg/kg (3) MDL = Method Detection Limit E. PART NUMBER LEGEND: H N 1 8 1 0 1 C G Mingtek Green Product Product Part Number
NO SPEC L:(AT 100KHz 0.2V 8mA) 350uH Min 1-2 1 524 2 564 3 510 4 479 5 542 3-4 536 532 523 506 489 5-6 498 546 546 514 495 7-8 527 496 498 509 504 LK:(AT 100KHz 0.2V) 0.5uH Max 1-2(18-17 short) 0.36 0.34 0.39 0.37 0.38 3-4(16-15 short) 0.38 0.36 0.38 0.34 0.36 5-6(14-13 short) 0.35 0.37 0.41 0.39 0.40 7-8(12-11 short) 0.34 0.42 0.38 0.42 0.39 CWW:(AT 100KHz 0.2V) 100PF TYP 1-2 TO 18-17 65.2 68.5 72.1 75.4 74.0 3-4 TO 16-15 64.8 69.5 76.0 75.2 74.6 5-6 TO 14-13 65.0 66.2 74.2 75.0 74.2 7-8 TO 12-11 66.8 67.5 73.9 75.1 74.0 TURNS RATIO: (1-2):(18-17)=1CT:1CT±5% OK OK OK OK OK (3-4):(16-15)=1CT:1CT±5% OK OK OK OK OK (5-6):(14-13)=1CT:1CT±5% OK OK OK OK OK (7-8):(12-11)=1CT:1CT±5% OK OK OK OK OK HI-POT: AT:1500VDC 10mA 1S 1-2 TO 18-17 OK OK OK OK OK 3-4 TO 16-15 OK OK OK OK OK 5-6 TO 14-13 OK OK OK OK OK 7-8 TO 12-11 OK OK OK OK OK MAIN TEST EQUIPMENT CHANGCHUANG CC2670 WITHSTANDING VOLTAGE TESTER JINKAITAI 3250 AUTOMATIC TRANSFORMER TEST SYSTEM TONGHUI TH2818 AUTOMATIC TRANSFORMER TEST SYSTEM RF NETWORK ANALYZERS 8712ET
NO SPEC Insertion Loss: -1.1dB Max(1-100MHz) 1-2: 30MHz 1 0.30 2 0.29 3 0.29 4 0.27 5 0.30 40MHz 0.44 0.41 0.40 0.31 0.43 50MHz 0.54 0.51 0.53 0.35 0.55 60MHz 0.58 0.53 0.54 0.43 0.58 80MHz 0.62 0.55 0.57 0.46 0.60 100MHz 0.54 0.51 0.48 0.55 0.51 3-4: 30MHz 0.32 0.32 0.27 0.29 0.30 40MHz 0.46 0.47 0.37 0.33 0.35 50MHz 0.56 0.57 0.46 0.38 0.43 60MHz 0.59 0.62 0.48 0.46 0.49 80MHz 0.32 0.67 0.51 0.53 0.51 100MHz 0.58 0.59 0.42 0.55 0.56 5-6: 30MHz 0.34 0.28 0.25 0.30 0.28 40MHz 0.45 0.41 0.37 0.42 0.40 50MHz 0.59 0.52 0.45 0.51 0.52 60MHz 0.64 0.54 0.46 0.56 0.54 80MHz 0.70 0.59 0.48 0.60 0.57 100MHz 0.61 0.53 0.42 0.51 0.53 7-8: 30MHz 0.29 0.32 0.25 0.30 0.27 40MHz 0.37 0.46 0.37 0.42 0.40 50MHz 0.46 0.58 0.42 0.55 0.51 60MHz 0.47 0.59 0.44 0.57 0.52 80MHz 0.48 0.64 0.45 0.60 0.55 100MHz 0.42 0.60 0.37 0.53 0.51 Return Loss: -18dB Min(0.5-30MHz) -14.4dB Min(40MHz) -13.1dB Min(50MHz) -12dB Min(60-80MHz) MAIN TEST EQUIPMENT CHANGCHUANG CC2670 WITHSTANDING VOLTAGE TESTER JINKAITAI 3250 AUTOMATIC TRANSFORMER TEST SYSTEM TONGHUI TH2818 AUTOMATIC TRANSFORMER TEST SYSTEM RF NETWORK ANALYZERS 8712ET
NO SPEC 1-2: 30MHz 1 21.7 2 23.9 3 22.4 4 20.6 5 21.7 40MHz 18.8 20.7 19.4 17.8 18.7 50MHz 17.1 19.1 17.6 16.2 17.2 60MHz 16.0 18.1 16.6 15.2 16.2 80MHz 16.0 18.2 16.3 15.3 16.3 3-4: 30MHz 22.8 21.4 24.0 20.8 19.3 40MHz 19.8 18.5 20.8 18.0 16.5 50MHz 18.1 16.9 19.0 16.4 14.9 60MHz 17.1 15.9 17.9 15.4 13.9 80MHz 17.3 15.7 17.4 15.3 13.5 5-6: 30MHz 20.6 22.9 25.2 22.5 23.2 40MHz 17.7 19.9 21.9 19.5 20.1 50MHz 16.1 18.3 20.2 17.8 18.4 60MHz 15.1 17.1 19.0 16.7 17.2 80MHz 14.8 16.9 18.4 16.6 17.0 7-8: 30MHz 27.2 22.4 26.6 22.6 23.9 40MHz 23.6 19.3 23.0 19.5 20.7 50MHz 21.8 17.7 21.2 17.9 19.1 60MHz 20.5 16.5 19.7 16.8 17.9 80MHz 19.4 16.3 18.5 16.8 17.9 Cross Talk: -40dB Min (0.5-60MHz) -35dB Min (60-80MHz) 1-2 TO 3-4: 30MHz 46.4 48.3 47.3 48.8 45.6 60MHz 40.3 41.2 43.2 42.2 41.3 100MHz 35.8 36.3 40.3 38.3 35.7 3-4 TO 5-6: 30MHz 48.3 47.3 49.3 45.5 48.2 60MHz 42.2 42.6 45.2 41.3 46.3 100MHz 41.0 40.3 39.3 39.3 43.5 MAIN TEST EQUIPMENT CHANGCHUANG CC2670 WITHSTANDING VOLTAGE TESTER JINKAITAI 3250 AUTOMATIC TRANSFORMER TEST SYSTEM TONGHUI TH2818 AUTOMATIC TRANSFORMER TEST SYSTEM RF NETWORK ANALYZERS 8712ET
SPEC 5-6 TO 7-8: Mingtek Technology Corp. NO 1 2 3 4 30MHz 45.2 45.8 48.7 46.3 47.3 60MHz 40.3 39.6 45.2 44.2 45.2 100MHz 38.3 35.6 41.3 40.3 41.3 5 MAIN TEST EQUIPMENT CHANGCHUANG CC2670 WITHSTANDING VOLTAGE TESTER JINKAITAI 3250 AUTOMATIC TRANSFORMER TEST SYSTEM TONGHUI TH2818 AUTOMATIC TRANSFORMER TEST SYSTEM RF NETWORK ANALYZERS 8712ET
P/N:HN18101CG NO:01 Insertion Loss and Return Loss (TX1)
P/N:HN18101CG NO:01 Insertion Loss and Return Loss (TX2)
P/N:HN18101CG NO:01 Cross Talk(TX1 TO TX2):
H. PACKAGE CRITERION: 1.PACKAGE MATERIAL: 1.1 Tube: 530*10.0*18.0 units: m/m 10.0±0.25 B 530±2.0 A 2.4 E 12.7±0.2 D 18.0±0.2 C 0.5±0.10 F 1.2.Inner Carton: 550*175*90 175 90 550 units: m/m 1.3.Export Carton: 560*375*205 2.PACKAGE QUANTITY: One Tube=30Pcs One Inner carton =1200Pcs One Export carton =4800Pcs
敏洲科技有限公司 MINGTEK Technology Corp. 變壓器的絕緣體與耐壓值測試表 項目內容規格值實測值 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 外觀 Appearance 導體徑 mm Bare Wire Dia 完成外徑 mm Overall Dia 針孔 ( 常態 ) Pin Hole ( Normal State ) 針孔 ( 捲繞, 伸長 5 % ) Pin Hole ( Elongated ) 絕緣破壞電壓 V Dielectric Strength AC 伸長率 % Elongation 導體電阻 20 Ω / km Condutor Resistance 直焊性 ( 400 ) sec Solderability 耐軟性 ( 200 ) 以上 Thermoplastic Flow 耐熱衝擊 ( 150 ) Heat Shock 密著性 Adtierence 耐溶性 Resistance to Solvent 接著力 g Bonding Strength Test 溶解性 % Solution Test 依規範 + 0.008-0.008 0.117-0.136 03 MAX 無龜裂 4000 MIN 25 MIN 2900.000 MAX 2.0 MAX 無短路無龜裂無龜裂無龜裂 ------------------ ------------------ 良 0.09 0.128 0 符合 10000 38 2750.000 0.7 符合符合符合符合 ------------------ ------------------ * 針腳. 腳面之上錫功能測試 1. 上錫條件 錫材 : Sn99.3/cu 0.7 助焊劑 : R Type Flux 錫爐溫度 : 245 ± 5 上錫時間 : 5 秒 2. 在每批產品中隨機抽取 5 只做上錫功能測試 3. 用顯微鏡檢查每只產品的任一針腳必須有 95 % 以上的面積上錫良好 4. 每個經上錫測試後的產品都要測試通過後才能出貨
H : DIP 無鉛産品波峰焊溫度曲線圖 : 一. 無鉛制程焊接條件 : 1. 適用產品型號 : 所有 DIP 類產品 2. 焊接方式 : 波峰焊接 3. 焊接温度曲线 ( 如下 ): 300 260 245-250 3~6Sec 230 210 180 150 120 90 60 30 0 100~110 90 6 max 30-60S 60~90 預熱區域 20 40 60 80 100 120 140 160 180 200 Sec 注 : 以上溫度曲線僅供參考