WISE-580x Quick Start Guide Quick Start Guide for WISE-580x Series May 2012, Version 1.2 Thank you for purchasing WISE-580x the Intelligent Data Logger PAC controller for remote monitoring and control application. This Quick Start Guide will provide you with minimum information to get started with WISE-580x. It is intended for use only as a quick reference. For more detailed information and procedures, please refer to the full user manual on the CD included in this package. In addition to this guide, the package includes the following items: WISE-580x Series Module Software Utility CD 2G microsd card RS-232 cable (CA-0910) Screw Driver (1C016) GSM Antenna (ANT-421-02) Only for WISE-5801 WISE-580x User Manual CD:\WISE-580x\document\User Manual\ http://ftp.icpdas.com/pub/cd/wise_cd/wise-580x/document/user manual/ WISE Website http://wise.icpdas.com/index.html ICP DAS Website http://www.icpdas.com/ 1
WISE-580x Quick Start Guide 1 -------------------------------------------- Configuring Boot Mode Make sure the Lock switch placed in the OFF position, and the Init switch placed in the OFF position. 2 --------------------------------------------------------------------- Connecting to PC, Network and Power The WISE-580x is equipped with an RJ-45 Ethernet port for connection to an Ethernet hub/switch and PC. You can also link directly the WISE-580x to PC with an Ethernet cable. WISE-580x +Vs + 2
WISE-580x Quick Start Guide 3 ----------------------------------------------------- Installing the MiniOS7 Utility Step 1: Get the MiniOS7 Utility The MiniOS7 Utility can be obtained from companion CD or our FTP site: CD:\Tools\MiniOS7 Utility\ ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/minios7/utility/minios7_utility/ Please download version v3.2.4 or later. Step 2: Follow the prompts to complete the installation MiniOS7 Utility Ver 3.24 After the installation has been completed, there will be a new short-cut for MiniOS7 Utility on the desktop. 4 ------------------------------------------------------------------------- Using MiniOS7 Utility to Assign a New IP The WISE-580x is an Ethernet device, which comes with a default IP address, therefore, you must first assign a new IP address to the WISE-580x. The factory default IP settings are as follows: Item Default IP Address 192.168.255.1 Subnet Mask 255.255.0.0 Gateway 192.168.0.1 3
WISE-580x Quick Start Guide Step 1: Run the MiniOS7 Utility Double-click the MiniOS7 Utility shortcut on your desktop. Step 2: Press F12 or choose Search from the Connection menu After pressing F12 or choosing Search from Connection menu, the MiniOS7 Scan dialog will appear, that will display a list of all the MiniOS7 modules on your network. See the status tip, waiting for the search to be done. 4
WISE-580x Quick Start Guide Step 3: Choose the module name and then choose IP setting from the toolbar Choose the module name for fields in the list, and then choose IP setting from the toolbar. Step 4: Assign a new IP address and then choose Set button Step 5: Choose Yes button & Reboot WISE-580x After completing the settings, press the Yes button in the Confirm dialog box to exit the procedure, then reboot WISE-580x.. 5
WISE-580x Quick Start Guide 5 ---------------------------------------------------------------------------------- Go to WISE-580x Web Site to edit Control Logic Please follow the steps below to implement IF-THEN-ELSE control logic on controllers: Step 1: Open a browser, and type in the URL address of the WISE-580x Open a browser (recommended using Internet Explorer, new version is better). Type in the URL address of the WISE-580x module in the address bar. Make sure the IP address is accurate. Step2: Get on the WISE-580x web site Get on the WISE-580x web site. Login with the default password wise. Implement the control logic configuration in the order (Basic Setting Advanced Setting Rule Setting Download to Module), then complete the IF-THEN-ELSE rule editing.. Step 3: For more detail information, please refer to WISE User Manual 6
WISE-580x 快速安裝指南 WISE-580x 系列快速安裝指南 May 2012, Version 1.2 歡迎使用 WISE-580x 快速安裝指南 感謝您購買 WISE-580x 系列控制器 : 多功能智慧型資料記錄 (Data Logger) PAC 控制器 本 快速安裝指南 提供 WISE-580x 系列安裝入門所需資訊, 如 需更詳細的安裝及使用說明, 請參閱更完整的使用手冊 產品內容 除了本 快速安裝指南 外, 此產品內容還包括以下配件 : WISE-580x 模組 軟體工具 光碟 2G microsd 記憶卡 RS-232 纜線 (CA-0910) 螺絲起子 (1C016) GSM 天線 (ANT-421-02) 僅提供 WISE-5801 技術支援 WISE-580x User Manual CD:\WISE-580x\document\User Manual\ http://ftp.icpdas.com/pub/cd/wise_cd/wise-580x/document/user manual/ WISE Website http://wise.icpdas.com/big5/index.html ICP DAS Website http://www.icpdas.com/ 1
WISE-580x 快速安裝指南 1 -------------------------------------------- 檢視啟動模式 確認指撥開關 Lock 的位置在 OFF,Init 的位置在 OFF 2 --------------------------------------------- 連接主機 網路及電源 WISE-580x 系列配有標準的網路接口 RJ-45, 可透過網路集線器 / 交換器與 PC 連接, 也可直接連到 PC 的網路接口 WISE-580x +Vs + 2
WISE-580x 快速安裝指南 3 --------------------------------------- 安裝 MiniOS7 Utility 步驟一 : 取得 MiniOS7 Utility MiniOS7 Utility 可取自隨附的光碟或 FTP: CD:\Tools\MiniOS7 Utility\ ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/minios7/utility/minios7_utility/ 請下載 v3.2.4 以後的版本 步驟二 : 按照命令提示完成安裝 MiniOS7 Utility Ver 3.24 安裝完成後, 桌面上將會出現 MiniOS7 Utility 的捷徑圖示 4 ----------------------------------------------------------- 啟動 MiniOS7 Utility 設定 IP 位址 WISE-580x 系列模組在出廠時會統一預設網路設定值, 使用者可以依照下列 步驟自行變更網路設定 WISE 模組的網路出廠預設值 : 項目預設值 IP 位址 192.168.255.1 子網路遮罩 (subnet mask) 255.255.0.0 通訊閘 (gateway) 192.168.0.1 3
WISE-580x 快速安裝指南 步驟一 : 啟動 MiniOS7 Utility 雙擊 MiniOS7 Utility 桌面捷徑 步驟二 : 選取鍵盤 F12 或於 Connection 選單中選取 Search 選取鍵盤 F12 或於 Connection 選單中選取 Search 後, 會出現 MiniOS7 Scan 對話視窗顯示網路上已啟動的 MiniOS7 模組 確認狀態欄上顯示模組搜尋完畢 (Search Done). 4
WISE-580x 快速安裝指南 步驟三 : 選取模組名稱後移到工具列選取 IP setting 於清單上選取模組名稱後移到工具列選取 IP setting 步驟四 : 設定新 IP 後選取 Set 鈕 步驟五 : 選取 Yes 鈕後, 請重新開機 WISE-580x 完成設定後, 於 Confirm 對話視窗選 取 Yes 鈕結束程序 隨後請重新開機 WISE-580x 5
WISE-580x 快速安裝指南 5 -------------------------------------------------------------- 前往 WISE 規則設定網頁 使用者透過 WISE 控制器所提供的規則設定網頁, 只需使用滑鼠點選設定, 即可完成控制器上工作邏輯的規劃 步驟一 : 開啟瀏覽器, 填入 WISE 控制器 IP 作為瀏覽器的 URL 位址 開啟電腦上的瀏覽器 ( 推薦使用 IE, 新版瀏覽器尤佳 ), 輸入 WISE 控制器的 IP 作 為 URL 位址 ( 如有重新設定 IP, 請確認所輸入 IP 是否正確 ) 步驟二 : 進入 WISE 規則設定頁面 進入 WISE-580x 控制器所提供的規則設定頁面, 使用預設密碼 wise 登入後, 僅需依照首頁上的設定流程 ( 基本設定 進階設定 規則設定 規則下載 ), 即可完成 WISE 控制器的邏輯規則編排 步驟三 : 設定流程中的細節, 請參照 WISE 操作手冊 6