Ác Åé å Serial ATA ( Sil3132) S A T A (1) SATA (2) BIOS SATA (3)* RAID BIOS RAID (4) SATA (5) SATA (a) S A T A ( S A T A R A I D ) (b) (c) Windows XP

Transcription

1 Serial ATA ( Sil3132)...2 (1) SATA... 2 (2) B I O S S A T A... 3 (3) RAID BIOS RAID... 6 (4) S A T A (5) S A T A... 12

2 Ác Åé å Serial ATA ( Sil3132) S A T A (1) SATA (2) BIOS SATA (3)* RAID BIOS RAID (4) SATA (5) SATA (a) S A T A ( S A T A R A I D ) (b) (c) Windows XP 2000 (d) (1) SATA S A T A S A T A S A T A ( S A T A ) "*" R A I D Silicon Image Sil3132 SATA - 2 -

3 (2) BI OS SA TA B I O S S A T A 1 BIOS POST (Power-On Self Test ) <Del> BIOS CMOS SETUP Integrated Peripherals Onboard H/W SATA Enabled H/W SATA Function RAID ( 1) RAID H/W SATA Function BASE CMOS Setup Utility-Copyright (C) Award Software Integrated Peripherals On-Chip Primary PCI IDE On-Chip Secondary PCI IDE SATA RAID/AHCI Mode [RAID] x On-Chip SATA Mode Auto x PATA IDE Set to Ch.1 Master/Slave SATA Port 0/2 Set to Ch.2 Master/Slave SATA Port 1/3 Set to Ch.3 Master/Slave USB Controller USB 2.0 Controller USB Keyboard Support [Disabled] USB Mouse Support [Disabled] Azalia Codec [Auto] Onboard H/W 1394 Onboard H/W SATA H/W SATA Function [RAID] Onboard H/W GigaRAID GigaRAID Function [RAID] Onboard H/W LAN1 Onboard H/W LAN2 1 Item Help Menu Level If a hard disk controller card is used, set at Disabled. Enable on-chip IDE Port. [Disabled] Disable on-chip IDE Port. : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F3: Language F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults B I O S B I O S Silicon Image Sil3132 SATA

4 Ác Åé å 2 Advanced BIOS Features Hard Disk Boot Priority Microsoft Windows 2000/XP SATA ( 2) CMOS Setup Utility-Copyright (C) Award Software Hard Disk Boot Priority 1. SCSI-0 : 05:00-0 ST AS 2. SCSI-1 : 05:00-1 ST AS 3. Bootable Add-in Cards Item Help Menu Level Use < > or < > to select a device, then press <+> to move it up, or <-> to move it down the list. Press <ESC> to exit this menu. : Move PU/PD/+/-: Change Priority F10: Save ESC: Exit 2 R A I D B I O S ( 6 ) B I O S A d v a n c e d BIOS Features Hard Disk Boot Priority Microsoft Windows 2000/XP ( 3) 1. SCSI-0 : 05:00-0 SiI Raid0 Set 2. Bootable Add-in Cards CMOS Setup Utility-Copyright (C) Award Software Hard Disk Boot Priority Item Help Menu Level Use < > or < > to select a device, then press <+> to move it up, or <-> to move it down the list. Press <ESC> to exit this menu. : Move PU/PD/+/-: Change Priority F10: Save ESC: Exit 3 Silicon Image Sil3132 SATA - 4 -

5 3 First Boot Device CDROM CD-ROM ( 4) Hard Disk Boot Priority First Boot Device Second Boot Device Third Boot Device Password Check CPU Hyper-Threading # Limit CPUID Max. to 3 No-Execute Memory Protect (Note) CPU Enhanced Halt (C1E) (Note) CPU Thermal Monitor 2(TM2) (Note) CPU EIST Function (Note) DRAM Data Integrity Mode CMOS Setup Utility-Copyright (C) Award Software Advanced BIOS Features [Press Enter] [CDROM] [Hard Disk] [CDROM] [Setup] [Disabled] [Non-ECC] Item Help Menu Level Select Hard Disk Boot Device Priority : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F3: Language F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults 4 4 B I O S Silicon Image Sil3132 SATA

6 Ác Åé å (3) RAID BIOS RAID SATA RAID BIOS SATA RAID R A I D 1 BIOS POST (Power-On Self Test ) ( 5) <Ctrl>+<S> <F4> Sil3132 SATA RAID SiI 3132 SATARaid BIOS Version Copyright (C) Silicon Image, Inc. Press <Ctrl+S> or F4 to enter RAID utility_ 5 RAID - RAID Configuration Utility ( 6) < > < > RAID Configuration Utility - Silicon Image Inc. Copyright (C) 2005 MAIN MENU Create RAID set Delete RAID set Rubuild Raid1 set Low Level Format Logical Drive Info HELP Press "Enter" to create RAID set PHYSICAL DRIVE 0 ST AS 111GB 1 ST AS 111GB LOGICAL DRIVE Reserved drives : Select Menu ESC: Previous Menu Enter: Select Ctrl-E: Exit 6 Silicon Image Sil3132 SATA - 6 -

7 Create RAID set <Enter> RAID ( 7) R A I D < E n t e r > R A I D 0 R A I D 1 SPARE DRIVE CONCATENATION RAID 0 RAID Configuration Utility - Silicon Image Inc. Copyright (C) 2005 MAIN MENU Create RAID set Delete RAID set Rubuild Raid1 set Low Level Format Logical Drive Info RAID0 RAID1 SPARE DRIVE CONCATENATION HELP RAID0=Striped PHYSICAL DRIVE 0 ST AS 111GB 1 ST AS 111GB LOGICAL DRIVE Reserved drives : Select Menu ESC: Previous Menu Enter: Select Ctrl-E: Exit 7 RAID 0 <Enter> (Auto configuration) (Manual configuration)( 8) Striped size 64KB 0 1 ch un k si ze ( 4 K 1 28 K) RAID Configuration Utility - Silicon Image Inc. Copyright (C) 2005 MAIN MENU Auto configuration Manual configuration HELP Press "Enter" to automatically create raid set Striped size is 64KB First drive is drive 0 PHYSICAL DRIVE 0 ST AS 111GB 1 ST AS 111GB LOGICAL DRIVE Reserved drives : Select Menu ESC: Previous Menu Enter: Select Ctrl-E: Exit Silicon Image Sil3132 SATA

8 Ác Åé å < En t e r> ( 9 ) < > < > <Enter> MAIN MENU Auto configuration Manual configuration RAID Configuration Utility - Silicon Image Inc. Copyright (C) 2005 HELP Press "Enter" to select the RaidSize : increment 1GB raid size : decrement 1GB raid size Please input the raid size: 181 GB PHYSICAL DRIVE 0 ST AS 111GB 1 ST AS 111GB LOGICAL DRIVE Reserved drives : Select Menu ESC: Previous Menu Enter: Select Ctrl-E: Exit 9 "Are You Sure (Y/N)?" Y N LOGICAL DRIVE RAID ( 10) RAID Configuration Utility - Silicon Image Inc. Copyright (C) 2005 MAIN MENU Create RAID set Delete RAID set Rubuild Raid1 set Low Level Format Logical Drive Info HELP Press "Enter" to create RAID set PHYSICAL DRIVE 0 ST AS MB 1 ST AS MB LOGICAL DRIVE Sil Raid0 Set 181GB : Select Menu ESC: Previous Menu Enter: Select Ctrl-E: Exit 10 Silicon Image Sil3132 SATA - 8 -

9 Dele te RAID set <Ent er> ( 1 1 ) RAID Configuration Utility - Silicon Image Inc. Copyright (C) 2005 MAIN MENU Create RAID set Delete RAID set Rubuild Raid1 set Low Level Format Logical Drive Info HELP Press "Enter" to delete a RAID set PHYSICAL DRIVE 0 ST AS MB 1 ST AS MB LOGICAL DRIVE Sil Raid0 Set 181GB : Select Menu ESC: Previous Menu Enter: Select Ctrl-E: Exit 11 <Ctrl>+<E> RAID Configuraion Utility Silicon Image Sil3132 SATA

10 Ác Åé å (4) S A T A Microsoft Windows 2000/XP SATA S A T A S A T A 1 2 ( 1 2 ) B o o t D r v MENU.EXE ( 13) 13 Silicon Image Sil3132 SATA

11 3 M E N U. E X E M S -D O S ( 1 4 ) 14 4 S A T A S A T A 1 5 Sil3132 A A)Si3132 RAID Driver Sil3132 9)Si3132 BASE Driver S A T A 15 5 ( 1 6 ) Silicon Image Sil3132 SATA

12 Ác Åé å (5) S A T A S A T A B I O S Microsoft Windows 2000 XP SATA ( Microsoft Windows XP ) 1 Microsoft Windows 2000 XP Press F6 if you need to install a 3rd party SCSI or RAID driver < F 6 > ( 1 7 ) < F 6 > 1 8 < F 6 > 1 Windows Setup Press F6 if you need to install a 3rd party SCSI or RAID driver S A T A < S > ( 1 8 ) Windows Setup Setup could not determine the type of one or more mass storage devices installed in your system, or you have chosen to manually specify an adapter. Currently, Setup will load support for the following mass storage devices(s) <none> * To specify additional SCSI adapters, CD-ROM drives, or special disk controllers for use with Windows, including those for which you have a device support disk from a mass storage device manufacturer, press S. * If you do not have any device support disks from a mass storage device manufacturer, or do not want to specify additional mass storage devices for use with Windows, press ENTER. S=Specify Additional Device ENTER=Continue F3=Exit 18 Silicon Image Sil3132 SATA

13 3 ( 1 9 ) Windows XP Silicon Image SiI 3132 SoftRAID 5 Controller for Windows XP/Server ( ) < E n t e r > Windows Setup You have chosen to configure a SCSI Adapter for use with Windows, using a device support disk provided by an adapter manufacturer. Select the SCSI Adapter you want from the following list, or press ESC to return to the previous screen. Silicon Image SiI 3132 SoftRAID 5 Controller for Windows XP/Server 2003 Silicon Image SiI 3132 SoftRAID 5 Controller for Windows 2000 ENTER=Select F3=Exit 19 ( 2 0 ) < E N T E R > Windows Setup Setup will load support for the following mass storage device(s): Silicon Image SiI 3132 SoftRAID 5 Controller for Windows XP/Server 2003 * To specify additional SCSI adapters, CD-ROM drives, or special disk controllers for use with Windows, including those for which you have a device support disk from a mass storage device manufacturer, press S. * If you do not have any device support disks from a mass storage device manufacturer, or do not want to specify additional mass storage devices for use with Windows, press ENTER. S=Specify Additional Device Enter=Continue F3=Exit 20 S A T A ( ) RAID Silicon Image SiI 3132 SATALink Controller for Win dows XP/Server 2003 Silicon Image SiI 3132 SATALink Controller for Windows Silicon Image Sil3132 SATA

14 Ác Åé å S AT A ( 2 1 ) < E NT E R > Microsoft Windows 2000 XP WindowsXP Professional Windows XP ENTER, C, D MB Disk 0 at Id 16 on bus 0 on Si3132r5 (MBR) MB ENTER= C= F3= 21 Silicon Image Sil3132 SATA