AVEVA 2004.11.4 Pdms (database hierarchy) (PipeworkModelling) PIPE WORLD BRANCH PDMS FLANGE,Elbow.. SITE Pipe routing is probably the activity that consumes most time on any large project and it is also one, which causes the most problems. Pipe routing in PDMS has always been one of the major strengths of the system, as you will discover in this module. ZONE PIPE BRANCH1 BRANCH2 FLANGE ELBOW
(Branch) Pdms PDMS Head Tail Iso Head Tail (Pipe) Branch Head Tail Tail Pdms Head (Specification) PDMS A1A-TRA ANSI CLASS 150 CARBON STEEL 150 A A3B-TRA ( ) ANSI CLASS 300 CARBON STEEL 300 B F1C-TRA ANSI CLASS 150 STAINLESS STEEL 150 C PDMS K -200~0 Design>Pipework E 20~200 30mm W 19~399 W 19.00,99.00 15.00,1000.00 /INS30 99.00,199.00 15.00,150.00 /INS50 99.00,199.00 200.00,1000.00 /INS100 199.00,249.00 15.00,100.00 /INS50 349.00,399.00 15.00,40.00 /INS50 349.00,399.00 50.00,150.00 /INS100 349.00,399.00 200.00,1000.00 /INS150
: 80-B-7 1. Creat>Pipe TRAIN.80-B-7 A3B-TRA W E1302A D1201 80-B-7 2. 3. TRAIN.80-B-7/B1 Iso Branch Pipe (Connect), 4. 5. (Nozzle) Apply TRAIN.E1302A/N2 Apply TRAIN.D1201/N1 Creat>Component 6 Forward/Backward
6. Assemblies 100mm Settings>Graphics>Representation, Branch (Temp) Tools>Modify Pipe>Add Insulation Pipe OpeTemp,OpePres. Pdms Tools>Insulation summary Lstube
Query>Properties (Data Consistency Angular Alignment Error Flange Connection Incompatible Connection Screwed Connection Leave Bore 100 Inconsistent Bores Arrive Bore 150 Offset Axes Incorrect Axial Alignment Iso Utilities>Data Consistency>Check Pipe Check CE NO DATA INCONSISTENCIES IsoDraft Iso Iso Iso TRAIN.80-B-7 Isometrics>Standard BASIC.MET Apply Iso Pdms Iso
Pdms Pdms *.plt AutoDesk Dxf IsoDraft, Reset Limit Iso Iso Iso (Fabrication Material) (Erection Material) Iso Plot Plotview
IsoDraft Iso 150-B-6 Through Forward, Explorer CE Backward, Explorer CE Auto Connect Head Forward Backward Tail Direct Rotate Creat Same Creat Like
Ppoint Distance Spool P0 SPOOL P0 Element Ppoint DISTANCE Through Through Pdms P0 Piping Component P1 P0 P3 P2 Through ID Cursor Through Next Through Previous Through 1 A Through Next B C Through 2 A Through Next B C A B C A B C
Branch Branch, Connect>Branch Connect D410 D410 BAD ARRIVE GEOMETRY PDMS SaveWork Undo Pdms Get Work IsoDraft
IsoDraft Admin ADMIN IsoDraft ADMIN Option>Modify>Basic.MET Format Plotfile Directory Plotfiles renamed based on drawing name Nozzle symbols Inline flow arrows Pipe Output units Pipe
Sheet Layout Itemcode Annotation Material list only Itemcode Material list + Tag Itemcode 250-B-5 Modify>Component>Route Tail Tail Head Head (Connect) Cref(Connect Reference) Cref Connect = Connect to Previous Cref /TRAIN.250-B-5/B2 Connect to Next Cref B2 B1
D300 D300 REFERENCE CREF NOT SET (Pipe) Branch Isodraft Not in network D430 A410,D620 D430 BAD ARRIVE CONNECTION TYPE Q Pa Q PL of pre A430 INSULATION CAN NOT BE SELECTED D620 INSULATION CAN NOT BE SELECTED Tools>Modify Pipe>Add Insulation 200-B-4 Tools>Auto Elbow Forward Orientate>Component>leave>Toward Next
100-B-8 Assemblies Flanged Valve Set a Distance Flanged Valve Set To Fitting Flanged Valve to Head Branch Head Flanged Valve To Tail Branch Tail / /, Position>Component>Bop/Top Coordinate Position>Component>Bop/Top>Onto>Coordinate>Up Explorer Modify>Hierarchy>Include Element Include Ce Model Editor