bizhub 423 / 363 / 283 簡易說明書 Shortcut Manual
1. Stylus Pen 輕觸筆 2. Touch Panel 輕觸螢光幕 3. Main Power indicator 電源指示燈 4. Sub power switch 副電源開關 5. Function key 公能鍵 6. Data indicator 資料指示燈 7. Keypad 數字鍵 8. Brightness Adjustment Dial 螢光幕亮度調整鍵 2
Konica Minolta bizhub 423 / 363 / 283 ** 如已選用共用用戶認證功能, 請跟以下步驟進入使用版面 ** If device with public authentication function, please follow the below steps 登入使用者用户 Login to user account 1. 按 使用者名稱清單 選擇用戶名稱, 按 確定 Press User Name List Select user name and Press OK 2. 按 密碼 輸入密碼, 按 確定, Press password press OK 3. 按 Access Press Access 登出請按 Access 鍵 2 次 Press Access twice times to logout 登入共用用戶 按 [ 共同的使用者部門 ] Press [Public User access] 3
影印功能 Copy Function Basic 基本設定 (I) Density/Background Removal 濃淡度 / 底色 1. 按濃淡度調校整份文件的深淺度 Touch Density the print image can be adjusted, each time [Lighter] or [Darker] is touched, the density is lightened or darkened by one level. 2. 按底色調整調校原稿背景的深淺度 Touch Background Removal the density of the background color of the document can be adjusted, each time [Light] or [Dark] is touched, the background density is lightened or darkened by one level. 按 Bleed Removal Level 影印白色背景的原稿 Press 背景準位 to copy an original with white background 按紙張調整影印有顏色背景的原稿 Press Paper Discoloration Adj to copy an original with colored background 4
Basic 基本設定 (II) -- Paper 紙張 更改手送紙紙張尺寸 Change Bypass Tray Setting 1 按基本設定, 按紙張 Press Basic, Press Paper 2 選擇手送紙盤 Select Paper Type 3 按紙盤變更設定 Press change Tray Settings 4 選擇紙張類型 Press Select Paper Type 5 輸入適合的尺寸 Input paper size a 按尺寸設定, 選擇標準尺寸 Touch Standard Size b 按自定尺寸輸入長度 X 和寬度 Y, 例如 6 按 OK Press OK 90mm 輸入 0900 ( 如要儲存尺寸, 按儲存, 再選擇儲存位 置 Memory1-5 ) Touch Custom Size input (Length) X and (width) Y,e.g. 90mm please input 0900 (If stored paper size,touch Store, then choose Memory1-5 ) 5
Basic 基本設定 (III) -- 倍率 Zoom 按倍率 Press ZOOM 1 選擇一般的變焦比率 Select fixed zoom size a 按預設的縮小 / 放大比率例如.. A3 A4 設定數字為 0.707 Touch Fixed zoom ratios e.g... A3 A4 default zoom ratio is 0.707 b 按 - + 加減號增加或減少變焦數字 Touch- + to change zoom ratio 2 按手動, 直接輸入變焦數字, 按 OK 確定 Touch Manual, Using the keypad,type in the desired zoom ratio then touch OK 6
分頁 / 分類 Sort/Group 1. 按分頁 Press Finishing 2. 可按分頁或群組 Press Sort or Group Sort Group 3. 如沒有其他設定, 按 Start 影印鍵 Press Start to Copy 位移功能 Offset 1. 按分頁 Press Finishing 2. 在位移功能項目中按是 In Offset option select Yes 3. 如沒有其他設定, 按 Start 影印鍵 Press Start to Copy * 如沒有安裝訂裝器, 副本會用十字型式分隔 If no finisher is installed, printed copies are sorted in crisscross pattern 如有安裝訂裝器, 副本會用前後型式分隔 If a finisher is installed, the copies are stacked on top of each other with each set shifted to separate it 7
( 必需加裝配件 Finisher FS527/ FS529) (Finisher FS527/ FS529 is required) 訂裝 Staple 1. 按分頁 Press Finishing 2. 在訂裝項目中按訂角或 2 個位置 At Staple select Corner or 2position 3. 按位置設定選擇訂裝位置 Press position Setting to desired staple positions 4. 如沒有其他設定, 按 Start 影印鍵 Press Start to Copy 打孔 Punch 1. 按分頁 Touch Finishing 2. 在訂裝項目中按 2 孔或 4 孔 At Staple select 2 Hole or 4 Hole 3. 按位置設定選擇打孔位置 Touch position Setting 4. 如沒有其他設定, 按 Start 影印鍵 Press Start to Copy 8
( 必需加裝配件 Finisher FS527 & SD509) (Finisher FS527 & SD529 is required) 摺疊 / 書本訂裝 Fold/Bind 1. 按分頁 Press Finishing 2. 在摺疊 / 裝訂項目中按 Yes 啟動功能 At Fold/Bind select Yes 3. 按對摺中間裝訂或三摺 Touch Half-Fold Center Staple & Fold or Tri-Fold Half-Fold 對摺 Center Staple & Fold 中間裝訂 Tri-Fold 三摺 9
Basic 基本設定 (IV) --Duplex/Combine 雙面 / 組合 Combine function 按雙面 / 組合 按 2 in 12 合 1 兩張原稿縮為一張或 4 in 1/ 8 in 14 合 1/8 合 1 四張 / 八張原稿縮為一張 Touch Duplex/Combine Touch 2 in 1 or Touch 4 in 1/ 8 in 1 To reduce the size from 2 / 4 / 8 sheets originals into 1 sheet of copy 選擇原稿 > 影本 Press Original > Copy a. 單面原稿印雙面副本 1-sided > 2-sided 單面 > 雙面 1-sided > 2-sided Single-sided Original to Double-sided Copy b. 雙面原稿印單面副本 2-sided >1-sided 雙面 > 單面 2-sided >1-sided Double-sided Original to Single-sided Copy c. 雙面原稿印雙面副本 2-sided >2-sided 雙面 > 雙面 2-sided >2-sided Double-sided Original to Double-sided Copy 10
Quality/Density 品質濃淡度 1. 可在原稿類型選擇適當的原稿類型 文字, 文字 / 圖片, 圖片, 點矩陣原稿或複印原稿 Select Original Type to choose Text, Text/Photo, Photo, Dot Matrix Original or Copied Paper 2. 按文字增強調校原稿文字的深淺度 Touch Text Enhancement select the reproduction quality of text when copying documents consisting of text that overlaps images such as illustrations or graphs 11
Originals Setting 原稿設定 1 按混合原稿啓動混合探測功能, 如放在自動送紙器的原稿有不同大小的混合 Press Mixed Original to Loads originals of different sizes (A4 or A3) into the ADF and scan them at a time. 2 按 Z 摺疊原稿確保 Z 摺疊過的原稿在影印時不會誤認原稿尺寸 Press Z-Folded Original correctly detects the original size when folded originals are loaded into the ADF and copied. 3 按原稿空白邊設定原稿內容的方向 Press Binding Position specify the original binding position (page margin) to prevent the copy from being printed upside-down when scanning a 2-sided original. 4 按原稿設定方向設定預留的訂裝位置 Press Original Direction when copying double-sided originals or making double-sided or combined copies, press this button to specify the direction in which the original is loaded into the ADF or placed on the Original Glass. 5 按 Original Size 原稿尺寸設定原稿大小, 預設是自動探測原稿大小 Press Original Size to specify the original size, the default setting is auto detect Proof Copy 預覽視窗 在做好需要的設定後, 按兩次 Proof Copy 鍵可預覽影印效果 Press Proof Copy twice to preview the image for checking the copy result 按 Start 確認並列印, 或按 Stop 重選覆印功能 To confirm press the Start button to print out or press Stop button to go back and do more adjustment 12
Application 應用功能 插頁 / 封面 / 章節 / 插入章節 [Sheet/Cover/Chapter Insert] 編輯影像 [Edit Image] 頁連寫 / 重覆 [Book Copy/Repeat] 頁面空白邊 [Page Margin] 畫像調整 [Image Adjust] 小冊子 [Booklet] 消框 [Erase] 戳記 / 構成 [Stamp/Composition] 卡片 [Card Shot] 儲存在使用者信箱 [Save in User Box] 在副本列印時插入特定紙張或加入特殊紙張作封面 Inserts another sheet of paper or adds a cover page to the paper for copying. Page 14 15 調整圖像效果 Inverts the contrast or gradation of the original or prints the original in the mirror image. Page 16 影印書本 ; 將細小的原稿以密舖平面方式重覆地印在副本上 Configure the settings for a book or catalog. An image on a single sheet of original can be repeatedly copied or divided and enlarged in parts to produce copies of the respective parts. Page 17 18 預留空白邊作釘裝 Select the binding margin (blank area) of the paper used for copying. Page 19 當原稿的尺寸比副本的紙張為小時可調整顯示的內容方式 Configure the layout for the image when the paper is larger than the original. Page 19 自動將原稿排好排版並計算好放大縮小的比例用雙面列印功能印成一本小冊子 Automatically arranges the page order of the scanned original and makes 2-sided 2 in 1 copies to produce a page layout for a center bound book, such as a magazine. Page 20 將原稿以外的部份留空不印在副本上 Erases unnecessary outside portion of the original body text or erases the area outside the original placed on the Original Glass. Page 21 在副本上加上原稿沒有的日期 / 時間, 頁碼或戳記, 亦可加上複印防護的功能 Prints the date/time, page number or a stamp printed on copies. This function also allows you to embed information for preventing unauthorized copying in a document. Page 23-25 影印卡片的正面和背面都印在同一張紙 Copies the contents of the front and back sides of a card-size original, for example, insurance card, driver's license, or business card, on one sheet. 將原稿儲存到影印機的硬碟內 Saves the scanned original data in a User Box. Page 25 Page 25 13
[Sheet/Cover/Chapter Insert] 插頁 / 封面 / 章節 / 插入章節 - OHP 投影片插頁 1. 按 Application 應用功能 Select Application 2. 按 Sheet /Cover /Chapter Insert 插頁 / 封面 / 插入章節 Select Sheet /Cover /Chapter Insert 3. 按 OHP Interleave OHP 白紙插頁 ( 必須選擇黑白模式 ) Select OHP Interleave 4. 選擇分隔紙的紙盤 Select the Interleave Paper 5. 把投射膠片放在手送紙盤 Place the Transparency at the bypass tray 6. 按 OK Press OK 7. 按 Start 影印鍵 Press Start - Cover Mode 封面 1. 按 Application 應用功能 Select Application 2. 按 Sheet /Cover /Chapter Insert 插頁 / 封面 / 插入章節 Select Sheet /Cover /Chapter Insert 3. 按 Cover Mode 封面 Select Cover Mode 4. 選擇前封面有沒有影像或後封面有沒有影像 Select Print Image at the Front / Back Cover or not 5. 及哪一個紙盤放置前封面紙或後封面紙 Also select which tray has the Front / Back Cover Paper 6. 按 Ok Press OK 7. 按 Start Press Start 14
- Insert Sheet 插頁 1. 按 Application 應用功能 Select Application 2. 按 Sheet /Cover /Chapter Insert 插頁 / 封面 / 插入章節 Select Sheet /Cover /Chapter Insert 3. 按 Insert Sheet 插頁 Select Insert Sheet 4. 按 Copy 複印或 Blank 空白選擇插入的頁數有 沒有影像 Select Copy or Blank to set up print image at the insert pages or not 5. 輸入需插入的頁號和選擇插紙的紙盤 Key in the page no. of the insert pages then select which tray has the insert paper 6. 按 Ok Press OK 7. 按 Start Press Start - Insert Image 畫像插入 1. 按 Application 應用功能 Select Application 2. 按 Sheet /Cover /Chapter Insert 插頁 / 封面 / 插入章節 Select Sheet /Cover /Chapter Insert 3. 按 Insert Image 畫像插入 Select Insert Image 4. 輸入需插入的頁號 Key in the page no. of the insert image 5. 按 Ok Press OK 6. 按 Start Press Start 15
[Edit Image] 編輯影像 - Neg. Pos. Reverse 黑白反像 1. 按 Application 應用功能 Select Application 2. 按 Edit Image 圖像編輯 Select Edit Image 3. 按 Neg. Pos. Reverse 黑白反像 Select Neg. Pos. Reverse - Mirror Image 鏡面畫像 1. 按 Application 應用功能 Select Application 2. 按 Edit Color 色彩編輯 Select Edit Color 3. 按 Mirror Image 鏡面畫像 Select Mirror Image - Image Adjustment 影像調整 1. 按 Application 應用功能 Select Application 2. 按 Image Adjustment 影像調整 Select Image Adjustment 3. 按對比, 愎印濃淡度或銳利度 Select Contrast, Copy Density or Sharpness 16
- Book Copy 書本複印 按 Application 應用功能 Select Application 1. 按 Book Copy / Repeat 頁連寫 / 重覆 Select Book Copy / Repeat 2. 按 Book Copy 書本掃瞄 Select Book Copy 3. 再按分離, 同時可選擇要不要 Select Separation 4. 可按封面或底頁 Also you can select Front Cover/Back Cover to copy the front Cover or back cover of the original. 5. 把書打開放在鏡面左上角, 按 Start Open and place the book at the top right of the original glass and press Start 6. 直至掃描整本書後, 按 Finish Until you have scan all the original you can press Finish 7. 再按 Start At last press the Start button to print out 如選擇 Front Cover 前封面, 掃描時.. If you have select the Front Cover Function: Fig.1. 先把前封面放在鏡面左上角, 按 Start Place the front cover at the top right of the original glass and press Start Fig.3. 然後才揭至第一頁掃描, 直至掃描整本書後, 按 Finish 再按 Start After you scan the front cover, open the book and place the 1 st page to continues the scanning, until you have scan all the original you can press Finish, then press Start button to print out 如選擇 Front Cover 前封面和後封面 Back Cover, 掃描時.. If you have select the Front and Back Cover Function: Fig. Fig.1. Fig.2. Fig.3. 先把前封面放在鏡面左上角, 按 Start Place the front cover at the top right of the original glass and press Start 再把後封面放在鏡面左上角, 按 Start Then place the back cover at the top right of the original glass and press Start 然後才揭至第一頁掃描, 直至掃描整本書後, 按 Finish 再按 Start After you scan the front cover, open the book and place the 1 st page to continues the scanning, until you have scan all the original you can press Finish, then press Start button to print out 17
- Image Repeat 畫像重複 1. 按 Application 應用功能 Select Application Original With Margin 2. 按 Book Copy / Repeat 頁連寫 / 重覆 Select Book Copy / Repeat Without Margin 3. 按 Image Repeat 畫像重複 Select Image Repeat 4. 選擇 With Margin / Without Margin 有空白邊 / 沒有空白邊 Select With Margin / Without Margin 5. 按 Set Range 範圍設定 Select Set Range 6. 按 Custom Size 自訂尺寸, 按 X 輸入長度和按 Y 輸入寬度 Select Custom Size to enter the original size, press X then key in the Width of the original, press Y then key in the Height of original. 7. 按 OK Press OK 8. 按 Start Press Start 18
- Page Margin 頁面空白邊 1. 按 Application 應用功能 Select Application 2. 按 Page Margin 頁邊的空白邊 Select Page Margin 3. 選擇要加裝釘線的位置頂端 / 裝訂, 左側 / 裝訂或右側 / 裝訂 Select the margin position Top, Left or Right 4. 於 Adjust Value 調整值畫像移位中輸入寬度 Setup the width of the margin by Key pad or + / - button 5. 按 OK Press OK 6. 按 Start Press Start - Image Adjust 畫像調整 1. 按 Application 應用功能 Select Application 2. 按 Image Adjust 畫像調整 Select Image Adjust 3. 按 Centering 中間 Select Centering 4. 按 OK Press OK 5. 按 Start Press Start 19
- Booklet 小冊子 1. 按 Application 應用功能 Select Application 2. 按 Booklet 小冊子 Select Booklet 3. 可選擇左邊或右邊 Left Binding / Right Binding Select Left Binding / Right Binding 4. 按摺疊 / 裝訂選擇摺疊或裝訂的方式 Select Fold/Bind to setup the fold or bind function ( 必需加裝配件 Finisher FS527 & SD509) (Finisher FS527& SD529 is required) 選擇中間裝訂對摺或不裝訂 Select Center Staple & fold, Half-fold No 5. 按 Paper 選擇紙張 Press Paper to select the output paper 6. 按 Cover Sheet 插入封面 Press Cover Sheet to insert cover sheet ( 詳情請看第 13 頁 Cover Mode 封面功能 ) (For more details please refer to Page 13 Cover Mode function) Half-Fold 對摺 Center Staple & Fold 中間裝訂 7. 按 OK Press OK 8. 按 Start Press Start 20
- Frame Erase 邊框刪除 1. 按應用功能 Press Application 2. 按消除設定 Press Erase 3. 按邊框刪除 Press Frame Erase 4. 選擇要刪除影像的位置及寬度 Select the edge and input the width 5. 按 OK 再按 Start Press OK and then Start - Non-Image Area Erase 非影像區域消除 1 按應用功能 Press Application 2 按刪除 Press Erase 3 按非畫像影區域消除 Press Non-Image Area Erase 4 按 OK 再按 Start Press OK and then Start 21
Stamp Composition 戳記構成 - Date / Time 日期時間 按應用功能 Press Application 可選擇戳記 / 構成 Select Stamp/Composition 按日期 / 時間 Select Date / Time 按列印位置可選擇把日期打印在不同位置 Press Print Position set up the position of the date and time 按文字色彩可選擇把日期的顏色 Press Text Color set up the color of the date and time 按文字尺寸可選擇把日期的大小尺寸 Press Text Size set up the size of the date and time 選擇在每一張副本上都列印日期時間 Select All Pages to print date/time in whole print out 選擇僅封面只在第一張副本上都列印日期時間 Select 1 st Page Only to print date/time on the 1 st page only 按 OK, 再按 Start Press OK, then press Start - Page # 頁碼 1. 按應用功能 Press 2. 按戳記 / 構成 Application Select Stamp/Composition 3. 按頁碼 Select Page Number 4. 在啟始的章節編號中可輸入開始號碼 Enter the starting no. at Starting Page Number 5. 按列印位置可選擇把日期打印在不同位置 (Press Print Position to change the print position) 按 OK, 再按 Start Press OK, then press Start 22
- Stamp 戳記 / 構成 按應用功能 Press 按戳記 / 構成 Application Select Stamp/Composition 按戳記 Select Stamp 選擇戳記 Select the watermark massage 按列印位置可選擇戳記打印的位置 Press Print Position to change the print position 按 OK, 再按 Start Press OK, then press Start - Copy Protect 複印防護 1. 按應用功能 Press Application 2. 按戳記 / 構成 Select Stamp/Composition 3. 按愎印安全 Select Copy Security 4. 按複印保護 Select Copy Protect 5. 按預設戳記選擇水印, 或按日期時間選擇日期時間, 或可按細節設定選擇顏色深淺等詳細資料 Press Preset Stamp to select the watermark massage, Press Date/Time to add the printing date & time on the output, Press Detail Setting to change the copy protect image color or density setting 6. 按 OK 後, 再按 Start Press OK, then press Start 23
- Overlay 重疊 1. 按應用功能 Press Application 2. 按戳記 / 構成, 再按重疊 Select Stamp/Composition, then select Overlay 3. 按色彩選擇用作重疊的原稿在列印時的顏色, 自動彩色 = 和原稿一樣的顏色, 黑色 = 用黑白色列印 Press Color to select the overlay image printing color, Auto color = same as original, Black = print in B / W 4. 按 OK 後, 再按 Start Press OK, then press Start 24
- Card Shot 卡片 1. 按應用功能 Press 2. 按卡片 Press Application Card Shot 3. 按 [X] 和 [Y] 輸入卡片的尺寸 Press [X] and [Y] and enter the size of the card 4. 按版面選擇排版方式 Press Layout to select the layout type of print out 5. 按倍率選擇縮放方式 Press Zoom to select the zoom type 全尺寸 = 1 比 1 比例 (100%) 自動 = 根據原稿尺寸自動計算放大縮小的倍率 Full Size = 1:1 (100%) Auto = Automatically selected based on the size of original 6. 按 Start Press Start - Save In User Box 儲存在使用者信箱 1. 按應用功能 Press Application 2. 按儲存在使用者信箱 Press Save In User Box 3. 按使用者信箱選擇目的地信箱 Press User Box to specify destination user box 4. 按文件名稱更改文件名稱 25 Press Document Name to change document name 5. 儲存列印是 = 在影印的同時將文件儲存到使用者信箱 儲存列印否 = 只將文件儲存到使用者信箱並不會覆印 Save & Print Yes = Save the document to the User Box & print a copy at the same time Save & Print No = Save the document to the User Box only 6. 按 Start Press Start
停止正在等候的工作 Delete the copy job in the Waiting List 1. 按作業顯示 press Job List 2. 按作業細節 Press Job Details 3. 選擇正在等候的工作 Select the job you want to delete 4. 按刪除 Press Delete 5. 按是後按 OK 清除工作的命令 Press Yes and then OK to delete printing job 26
增加電郵或傳真 Add Email or Fax 1. 按 Utility/Counter Press Utility/Counter 2. 按 1. 目的地 / 信箱的登記 Press 1. One Touch/User Box Registration 3. 按 1. 掃瞄登錄 / 傳真目的地 Press 1. Create One Touch Destination 4. 按 1. 地址簿 ( 共用 ) Press 1.Address Book(Public) 5. 按電郵送信或傳真傳送 Press E-mail or Fax 6. 按新的 Press New 7. 按名稱, 輸入名稱, 按 OK Press Name to input name and Press OK 8. 按輸入電郵地址 / 傳真地址, 按 OK Press Address to input email or fax address and press OK 9. 按索引, 選擇要放在哪個索引中, 按 OK Press Index and select Favorites or other Index and press OK 27
傳真 / 掃瞄功能 Fax / Scan Function 1. 按 Fax/Scan Press Fax/Scan 2. 選擇一按鍵的索引尋找傳真或掃瞄的目的 地 Find the destination by one-touch Index 如果是傳真可直接按數字鍵輸入傳真號碼 For fax function you can also press the number key pad directly to input the fax number 如果希望將同一份文件傳真到多個目的地, 可在輸入第一個地址後按下一個目的地便可繼續加入目 的地 If you want to fax the same document to multiple destination you can press the next destination button to let you input the next destination fax number ( 必須加裝傳真配件 FK508) (FK508 is required) 3. 按 Start Press Start 28
掃瞄設定 Scan Setting 1. 按 Fax/Scan Press Fax/Scan 2. 掃描設定 Scan Setting A. 原稿型態 選擇原稿類型 Original Type - Select original type B. 單面 / 雙面 - 設定原稿是單或雙面 Simplex/Duplex - Select original single-sided or double-sided C. 解晰度 - 設定解像度 Resolution resolution setting D. 檔案類型 - 設定掃瞄後的檔案類型式 File Type Change file format 多頁 - 把多頁的掃瞄文件存為一個檔案 ( 於 JPEG 不能使用 ) Multi Page- combine all scanned original data and save as a single file (can t use if JPEG is select) 分頁 把掃瞄的文件分為指定的頁數儲存. ( 按數字鍵選擇指定的頁數 ) Page Separation - divide the scanned data at a specified page. (Specified by pressing number key pad) E. 濃淡度 - 設定深淺度 Density Change density F. 色彩 - 設定掃瞄色彩, Color change color mode, B/W or Color G. 分離掃瞄 - 不同文件可分開掃瞄並合成為一檔案 Separate Scan Originals can be separate to scan and save as a single file 3. 原稿設定 Original Setting 29 混合原稿 - 啓動探測功能, 如放在自動送紙器的原稿有不同大小的混合 Mixed Original - Scan originals of different sizes are loaded together into the feeder 4. 選擇一按鍵的索引尋找傳真或掃瞄的目的 Find the destination by one-touch Index 5. 按 Start Press Start
檢查傳送記錄 Display the Job History List 1. 按作業顯示 2. 按作業細節 3. 按傳送 4. 按作業日誌 5. 按通信清單 6. 選擇掃瞄傳送清單 / 傳真傳送清單 7. 選擇要列印的報告 A. 動態式報表 B. 傳送報表 C. 接收報表 8. 按 Start 1. Press Job List 2. Press Job Details 3. Press Send 4. Press Job History 5. Press Comm. List 2 3 6. Select Scan TX List / Fax TX List 7. Select which report you want to print A Activity Report B TX Report C RX Report 8. Press Start Button 4 5 30
使用者信箱功能 User Box Function 列印使用者信箱內的文件 Print a document from User Box 1. 按 User Box Press User Box 2. 選擇需要的使用者信箱 Select the user box 3. 按使用 / 檔案 Press Use/File 4. 選擇需要的文件 Select the document 5. 按列印 Press Print A, 選擇列印份數 ( 按數字鍵輸入 ) Select how many copies by num. key pad B, 選擇單面 / 雙面列印 Select single / double side printing C, 選擇全彩色 / 黑白列印 Select Color mode: Full Color / Black 6. 按 Start Press Start 31
儲存文件到使用者信箱 Save a document to User Box 1. 按 User Box Press User Box 2. 按儲存文件 Press Save Document 3. 選擇需要的使用者信箱 Select user box 4. 在按 Start 開始掃瞄之前可更改下列設定 You can change the below setting before you press the Start button to save the document to user box A, 按文件名稱便可更改文件名稱 Press Document Name to Change Document Name B, 按掃瞄設定便可更改掃瞄設定 Press Scan Setting to Change Scan Setting 設定原稿是單面 / 雙面掃瞄 Select single / double side original scanning mode 選擇檔案格式 (PDF / JPEG / TIFF / Compact PDF) Select file type (PDF / JPEG / TIFF / Compact PDF) 選擇自動彩色 / 全彩色 / 黑白 灰楷尺度掃瞄模式 Select Color mode: Auto Color / Full Color / Black / Gray Scale 32
Remove Jammed Paper 清除塞紙 * 版面顯示塞紙位 Remove misfeed at circle 1. 打開出紙位置之綠色鍵後, 拉出紙張 Pull up the upper right side door release lever, and then open the upper right side door 2. 如雙面器塞紙, 請打開雙面器後拉出紙張 Open the door of the automatic duplex unit 3. 如手送紙盤或紙盤上紙位, 請參考以下步驟 Open the door of the Bypass Tray 33
Change Toner Cartridge 更換碳粉 * 當某碳粉接近不足時, 版面會顯示右邊的提示, *If toner near empty,screen will show toner empty message 34
報讀和打印總咪錶數 Check and Print meter list, 如沒有安裝數碼醫生, 請每月把咪錶報告傳真至 2565 2128 If Digital Doctor not installed, please fax the meter report to 2565 2128 monthly 1. 按 Utility / Counter Press Utility / Counter 2. 按計數器 Press Meter Count 3. 按細節檢查 Press Check Details 4. 按列印 Press Print List 5. 選擇紙盤 Select paper tray 6. 按 Start Press Start 35
Secure print 機密列印 1. 按 檔案 列印 選手打印機 Click File Print Select Printer 3. 按 內容 Click Preference 4. 於 輸出方法 選 機密列印 輸入 [ 機密列印 ID] 和 [ 密碼 ] Click Output Method and select Secure Print,input ID and Password 5. 按 [ 確定 ] Click [OK] - 於影印機取回機密列印文件程序 Recall a job from Copier 1. 按 User Box Press User Box 2. 按 系統 安全文件信箱 使用 / 檔案 Press System User Box Secure Document User Box Use/File 3. 於 [ 帳號 ] 和 [ 安全文件列印密碼 ] 輸入 ID/ 密碼, 再按 OK Input ID and password in the field of [ID] and [Secure print document password] 4. 選擇所需文件之後按 列印 再按 Start Select desired file, press print and then Start 36
列印信封或特別尺寸紙張 Print Envelope or custom size paper 1. 先把影印機手送盤上的紙拿走 Take paper away in Bypass tray, to keep it empty. 電腦打印程序設計 Printer Driver Setting 2. 在電腦開啓文件後, 選擇本印表機 Open the file,click printer driver 3. 點選 [ 內容 ] Click [Preferences] 4. 在 [ 原稿尺寸 ] 內選擇 [ 自定尺寸 ] 輸入原稿紙 張之尺寸 ( 如 : 110mm x 220mm) Click [Original Size] select [Custom size] then input Width and Length (e.g. : 110mm x 220mm) 5. 在 [ 紙張尺寸 ] 內選 [ 如同原稿尺寸 ] Click [Output Size] select [Same as Original Size] 6. 按 [ 確定 ] Press [OK] 7. 手放信封或特別尺寸紙張紙張在影印機手送盤上 ( 正面向下 ) Place envelope or custom size paper on Bypass tray (Face Down) 8. 按 [ 完成 ] Press [Complete] 37
使用外置記憶體 Using External Memory USB Port 從外置記憶體打印 Print from External Memory 按 [User Box] [ 系統 ] [ 隨身碟 ] [ 使用 / 檔案 ] 選擇要打 印的檔案 [ 列印 ] [Start] Press [User Box] [System user box] [External Memory] [Use/file] Select file [Print] [Start] 掃瞄到外置記憶體 scan to External Memory ( 要先在管理員模式先開動此功能 Must enable in Admin mode first) 按 [ 儲存文件 ] [ 使用者信箱 ] [ 系統 ] [ 外接記憶體 ] [Start] Press [Save Document] [User Box] [External Memory] [Start] 38
Supplementary Notes ----------------------------------------------------------- ----------------------------------------------------------- ----------------------------------------------------------- ----------------------------------------------------------- ----------------------------------------------------------- ----------------------------------------------------------- ----------------------------------------------------------- ----------------------------------------------------------- ----------------------------------------------------------- ----------------------------------------------------------- ----------------------------------------------------------- ----------------------------------------------------------- ----------------------------------------------------------- ----------------------------------------------------------- -----------------------------------------------------------
部門熱線Particulars 市務科 Marketing Division Ø 銷售熱線Sales Hotlines 查詢產品及銷售詳情 New Product and Sales Enquires 聯絡方法Contact us 電話Tel : 2565 2111 電郵Email : bhkg_sales@bhk.konicaminolta.hk 服務科 Technical Service Division Ø 維修熱線Repair Hotline 多功能產品之維修服務 MFP Repair Services 電話Tel : 2565 2176 傳真Fax : 2856 1024 服務科 Technical Service Division Ø 產品之技術支援熱線 軟件及網絡支援 Application, Network and System Support 電話Tel : 2565 2178 客戶服務Customer Service Department Ø 客戶服務熱線 Customer Service Hotlines 保養合約查詢 Maintenance Agreement 新客戶之產品培訓 New Customer Product Training 賬單查詢 Invoice Enquiries 報錶 (請於報錶結算日前報讀 ) Report meter reading through telephone system (Please report meter reading on or before cut-off date) 客戶服務 Customer Service Department Ø 用品供應熱線 Order Section Hotlines 訂購消耗品如碳粉及影印紙 Ordering of Consumable Products (Toners, Paper, etc ) 電話Tel : 2565 2190 傳真Fax : 2565 2128 電話Tel : 2856 4306 電話Tel : 2565 8181 English - Press 2, then press 2, 中文 - 按 1 字然後按 2 字 傳真Fax : 2856 2008 電郵Email : bhkg_csmeter@bhk.konicaminolta.hk 電話Tel : 2565 2139 傳真Fax : 2565 7613 電郵Email : bhkg_csorder@bhk.konicaminolta.hk 財務科 Finance Division Ø 月結單查詢 Statement Enquiries 電話Tel : 2856 4710 傳真Fax : 2516 9177 行政科 Administration Department Ø 客戶的建議及意見反映 Other Suggestions & Comments 電話Tel : 2565 8181 按Press 0 網上客戶服務 Online Support Services http://www.konicaminolta.hk/hk/zh-hk/customer-services.php http://www.konicaminolta.hk/hk/en-us/customer-services.php