Data Sheet Customer: Product: CS Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 1225/3720/7520/0612 Issued Date: Edition: 30-pr-15 REV.D2 VIKING ECH CORPORION 光頡科技股份有限公司 No.70, Kuanfu N. Rad., Hsin Chu Industrial Park, Hukou Hsiang, Hsin Chu Hsien, 303, aiwan EL:886-3-5972931 FX:886-3-5972935 886-3-5973494 E-mail:sales@viking.com.tw VIKING ECH CORPORION KOHSIUNG RNCH 光頡科技股份有限公司高雄分公司 No.248-3, Sin-Sheng Rd., Cian-Jhen Dist., Kaohsiung, 806, aiwan EL:886-7-8217999 FX:886-7-8228229 E-mail:sales@viking.com.tw UXI MEC CO., LD. 無錫泰銘電子有限公司 No.22 Xixia Road, Machinery & Industry Park, National Hi-ech Industrial Development Zone of uxi, uxi, Jiangsu Province, China Zip Code:214028 EL:86-510-85203339 FX:86-510-85203667 86-510-85203977 E-mail:china@viking.com.tw Produced by (QC) Checked (QC) pproved by (QC) Prepared by (Sales) ccepted by (Customer) 30-pr-15 30-pr-15 30-pr-15 30-pr-15 Susan Huang J.C. Liu J.C. Liu
Features -3 atts power rating in 1 att size, 1225 package -Low CR of ±100 PPM/ C -Resistance values from 1m to 1 ohm -High purity alumina substrate for high power dissipation -Long side terminations with higher power rating Construction w D2 D1 L 9 8 7 1 2 pplications -Power Management pplications -Switching Power Supply -Over Current Protection in udio pplications -Voltage Regulation Module (VRM) -DC-DC Converter, attery Pack, Charger, daptor -utomotive Engine Control -Disk Driver 1 lumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (g/pd) 2 ottom Electrode (g) 5 arrier Layer (Ni) 8 Primary Overcoat (Glass) 3 op Electrode (g-pd) 6 External Electrode (Sn) 9 Secondary Overcoat (Epoxy) 3 4 5 6 Dimensions Size (Inch) L D1 D2 eight (g) (1000pcs) CS01 0201 0.60±0.03 0.30±0.03 0.23±0.05 0.12±0.05 0.15±0.05 0.18 CS02 0402 1.00±0.05 0.50±0.05 0.32±0.10 0.25±0.10 0.20±0.10 0.7 CS03 0603 1.60±0.10 0.80±0.10 0.45±0.10 0.30±0.20 0.30±0.20 1.99 CS05 0805 2.00±0.10 1.25±0.10 0.55±0.10 0.30±0.20 0.40±0.25 5.3 CS06 1206 3.10±0.10 1.55±0.10 0.55±0.10 0.50±0.30 0.40±0.25 8.82 CS13 1210 3.10±0.10 2.60±0.15 0.55±0.10 0.50±0.30 0.50±0.25 15.5 CS10 2010 5.00±0.10 2.50±0.15 0.60±0.15 0.60±0.30 0.50±0.25 27.03 CS12 2512 6.35±0.10 3.10±0.15 0.60±0.10 0.60±0.30 0.55±0.25 43.08 CS12 (2) CS12 (2) 2512 (10-99mΩ) 2512 (100-1000mΩ) 6.35±0.20 3.15±0.15 0.74±0.10 0.60±0.30 0.55±0.25 53.08 6.35±0.20 3.15±0.15 0.74±0.10 0.60±0.30 2.10±0.10 53.08 CS25 1225 3.10±0.15 6.30±0.15 0.90±0.15 0.60±0.30 0.80±0.25 64.88 CS37 3720 2.00±0.20 3.75±0.20 0.60±0.10 0.40±0.20 0.40±0.20 19.96 CS75 7520 2.00±0.20 7.50±0.30 0.60±0.10 0.40±0.20 0.40±0.20 35.71 CS62 0612 1.55±0.10 3.10±0.15 0.55±0.10 0.30±0.15 0.45±0.15 10.19 2 Revision: 30-pr-2015
Part Numbering CS 06 F G U R100 Product Dimensions (L ) Resistance olerance Packaging Code CR (PPM/ C) Power Rating Resistance Marking 01: 0201 02: 0402 03: 0603 05: 0805 06: 1206 13: 1210 10: 2010 12: 2512 25: 1225 37: 3720 75: 7520 62: 0612 F: ±1% G: ±2% J: ±5% : aping Reel : ulk E: ±100 F: G: H: J: K: ±150 R: ±1000 : Standard S: 2 : 1.5 : 1 Q: 3/4 U: 1/2 V: 1/4 P: 1/5 : 1/8 R010: 0.01Ω R100: 0.1Ω 1R00: 1Ω : Standard N: No Marking : ide Recommend Land Pattern Derating Curve 100 C Power ratio(%). 80 60 40 20 0 0 20 40 60 80 100 120 140 160 180 mbient emperature( ) Pad Layout (Except For CS12:Ultra High Power Rating Series) C CS01 0.25 0.30 0.40±0.2 CS02 0.50 0.50 0.60±0.2 CS03 0.80 1.00 0.90±0.2 CS05 1.00 1.00 1.35±0.2 CS06 2.00 1.15 1.70±0.2 CS13 2.00 1.15 2.50±0.2 CS10 3.60 1.40 2.50±0.2 CS12 4.90 1.60 3.10±0.2 CS25 1.20 2.00 7.00±0.2 CS37 1.00 1.80 3.90±0.2 CS75 1.00 1.80 7.60±0.2 CS62 0.60 1.00 3.20±0.2 Marking for 0603 Code 1R0 1.000Ω R10 0.100Ω R01 0.010Ω 102 0.102Ω 024 0.024Ω Pad Layout ( For CS12: Ultra High Power Rating Series) Resistance Range C CS12 10~99 mω 4.9 1.6 3.1±0.2 CS12 100~1000mΩ 1.0 3.55 3.1±0.2 3 Revision: 30-pr-2015
Soldering Condition IR Reflow Soldering ave Soldering (Flow Soldering) (1) ime of IR reflow soldering at maximum temperature point 260 C:10s (2) ime of wave soldering at maximum temperature point 260 C:10s (3) ime of soldering iron at maximum temperature point 410 C:5s Standard Electrical Specifications Item Power Rating at 70 C Operating emp. Range Max. Operating Current Resistance Range (mω) ±1% ±2% ±5% CR (PPM/ C) CS01 (0201) 1/20 0.70 CS02 (0402) 1/16 1.11 CS03 (0603) 1/10 2.23 CS05 (0805) 1/8 2.50 CS06 (1206) 1/4 5.00-55 ~ +155 C CS13 (1210) 1/2 7.07 CS10 (2010) 3/4 8.66 CS12 (2512) 1 10.0 CS25 (1225) 3 31.6 CS37 (3720) 1 10.0 100-147 150-500 510-1000 50-100 102-500 510-1000 20-50 51-100 102-500 510-1000 20-50 51-100 102-196 200-1000 10-20 21-50 51-91 100-1000 3-5 6-20 21-30 33-8000 10-18 20-500 ±1000 ±150 ±100 ±150 CS75 (7520) 2 44.7 5-10 11-350 CS62 (0612) 1 10.0-1 - 4 10-27 30-91 100-1000 ±150 4 Revision: 30-pr-2015
High Power & Ultra High Power Rating Electrical Specifications Item Power Rating at 70 C Operating emp. Range Max. Operating Current Resistance Range (mω) ±1% ±2% ±5% CR (PPM/ C) CS02 (0402) 1/8 1.56 CS03 (0603) 1/8 1/5 1.98 CS05 (0805) 1/4 2.21 CS06 (1206) 1/2-55 ~ +155 C 7.07 CS13 (1210) 3/4 8.66 CS10 (2010) 1 10.0 CS12 (2512) 1.5 12.2 CS12 (2512) *2 *: Ultra High Power Low CR Electrical Specifications 14.1 51-100 102-500 510-1000 10-20 21-50 51-91 100-1000 Item Power Rating at 70 C Operating emp. Range Max. Operating Current Resistance Range (mω) ±1% ±2% ±5% CR (PPM/ C) CS05 (0805) 1/8 1.11 100-1000 ±100 CS06 (1206) 1/4 1.58 100-1000 ±100 CS13 (1210) 1/2 2.58 75-1000 ±100 CS10 (2010) 3/4 3.87 50-1000 ±100 CS12 (2512) 1-55 ~ +155 C 7.07 20-1000 ±100 CS12 (2512) *2 6.32 50-1000 ±100 CS37 (3720) 1 3.16 100-500 ±100 CS75 (7520) 2 6.32 50-350 ±100 *: Ultra High Power Operating Current= (P/R) Viking is capable of manufacturing the optional spec based on customer s requirement. 5 Revision: 30-pr-2015
Environmental Characteristics Item Requirement est Method emperature Coefficient of Resistance (.C.R.) Short ime Overload Insulation Resistance Endurance Damp Heat with Load Dry Heat ending Strength Solderability Resistance to Soldering Heat Voltage Proof Leaching Rapid Change of emperature s Spec. ±(1.0%+0.05Ω) For High power rating 10G ±(1.0%+0.05Ω) ±(1.0%+0.05Ω) 95% min. coverage No breakdown or flashover Individual leaching area 5% otal leaching area 10% JIS-C-5201-1 4.8 IEC-60115-1 4.8-55 C~+125 C, 25 C is the reference temperature JIS C 5201-1 4.13 IEC 60115-1 4.13 RCV*2.5 or Max. Overload voltage whichever is lower for 5 seconds JIS-C-5201-1 4.6 IEC-60115-1 4.6 Max. Overload voltage for 1 minute JIS-C-5201-1 4.25 IEC-60115-1 4.25.1 70±2 C, RCV for 1000 hrs with 1.5 hrs ON and 0.5 hrs OFF JIS-C-5201-1 4.24 IEC-60115-1 4.24 40±2 C, 90~95% R.H., RCV for 1000 hrs with 1.5 hrs ON and 0.5 hrs OFF JIS-C-5201-1 4.23 IEC-60115-1 4.23.2 at +155 C for 1000 hrs JIS-C-5201-1 4.33 IEC-60115-1 4.33 ending once for 5 seconds with 3mm 2010, 2512 sizes: 2mm JIS-C-5201-1 4.17 IEC-60115-1 4.17 245±5 C for 3 seconds JIS-C-5201-1 4.18 IEC-60115-1 4.18 260±5 C for 10 seconds JIS-C-5201-1 4.7 IEC-60115-1 4.7 1.42 times Max. Operating Voltage for 1 minute JIS-C-5201-1 4.18 IEC-60068-2-58 8.2.1 260±5 C for 30 seconds JIS-C-5201-1 4.19 IEC-60115-1 4.19-55 C to +155 C, 5 cycles RCV(Rated continuous working voltage)= (P*R) or Max. Operating voltage whichever is lower. Storage emperature: 25±3 C; Humidity < 80%RH 6 Revision: 30-pr-2015
Packaging Packaging Quantity & Reel Specifications Φ Φ ΦC Paper ape (E) CS01 178.0±1.0 60.0+1.0 13.5±0.7 9.5±0.1 11.5±1.0 10,000 Embossed Plastic ape (E) CS02 178.0±1.0 60.0+1.0 13.5±0.7 9.5±0.1 11.5±1.0 10,000 - CS03 178.0±1.0 60.0+1.0 13.5±0.7 9.5±0.1 11.5±1.0 5,000 - CS05 178.0±1.0 60.0+1.0 13.5±0.7 9.5±0.1 11.5±1.0 5,000 - CS06 178.0±1.0 60.0+1.0 13.5±0.7 9.5±0.1 11.5±1.0 5,000 - CS13 178.0±1.0 60.0+1.0 13.5±0.7 9.5±0.1 11.5±1.0 5,000 CS10 178.0±1.0 60.0+1.0 13.5±0.7 13.5±1.0 15.5±1.0-4,000 CS12 178.0±1.0 60.0+1.0 13.5±0.7 13.5±1.0 15.5±1.0-4,000 CS12 (2) 178.0±1.0 60.0+1.0 13.5±0.7 13.5±1.0 15.5±1.0-2,000 CS25 178.0±1.0 60.0+1.0 13.5±0.7 13.5±1.0 15.5±1.0-2,000 CS37 178.0±1.0 60.0+1.0 13.5±0.7 13.5±1.0 15.5±1.0-2,000 CS75 178.0±1.0 60.0+1.0 13.5±0.7 17.5±1.0 19.5±1.0-2,000 CS62 178.0±1.0 60.0+1.0 13.5±0.7 9.5±0.1 11.5±1.0 5,000 - Paper ape Specifications ottom ape op ape ψ D0 E F Paper ape Resistor P 1 P 2 P 0 direction of unreeling E F CS01 0.38±0.05 0.68±0.05 8.0±0.20 1.75±0.10 3.50±0.05 4.00±0.10 2.00±0.05 2.00±0.05 1.50+0.1,-0 0.42±0.20 CS02 0.65±0.10 1.15±0.10 8.0±0.20 1.75±0.10 3.50±0.05 4.00±0.10 2.00±0.05 2.00±0.05 1.50+0.1,-0 0.45±0.10 CS03 1.10±0.10 1.90±0.10 8.0±0.20 1.75±0.10 3.50±0.05 4.00±0.10 4.00±0.05 2.00±0.05 1.50+0.1,-0 0.70±0.10 CS05 1.60±0.10 2.40±0.20 8.0±0.20 1.75±0.10 3.50±0.05 4.00±0.10 4.00±0.05 2.00±0.05 1.50+0.1,-0 0.85±0.10 CS06 1.90±0.10 3.50±0.20 8.0±0.20 1.75±0.10 3.50±0.05 4.00±0.10 4.00±0.05 2.00±0.05 1.50+0.1,-0 0.85±0.10 CS13 2.90±0.10 3.50±0.20 8.0±0.20 1.75±0.10 3.50±0.05 4.00±0.10 4.00±0.05 2.00±0.05 1.50+0.1,-0 0.85±0.10 CS62 1.90±0.10 3.50±0.20 8.0±0.20 1.75±0.10 3.50±0.05 4.00±0.10 4.00±0.05 2.00±0.05 1.50+0.1,-0 0.85±0.10 P0 P1 P2 ΦD 0 7 Revision: 30-pr-2015
Emboss Plastic ape Specifications op ape ψ D0 E F Emboss ape Resistor ψ D1 1.4Min. P1 P2 P0 direction of unreeling E F P 0 P 1 P 2 ΦD 0 CS10 2.80±0.10 5.50±0.10 12.0±0.30 1.75±0.10 5.5±0.05 4.00±0.05 4.00±0.10 2.00±0.05 1.50+0.10 1.00±0.20 CS12 3.50±0.10 6.70±0.10 12.0±0.30 1.75±0.10 5.5±0.05 4.00±0.05 4.00±0.10 2.00±0.05 1.50+0.10 1.00±0.20 CS12 (2) 3.38±0.10 6.68±0.10 12.0±0.30 1.75±0.10 5.5±0.10 4.00±0.10 4.00±0.10 2.00±0.05 1.55+0.05 1.45±0.20 CS25 3.38±0.10 6.68±0.10 12.0±0.30 1.75±0.10 5.5±0.10 4.00±0.10 4.00±0.10 2.00±0.05 1.55+0.05 1.45±0.20 CS37 2.50±0.20 4.45±0.20 12.0±0.30 1.75±0.10 5.5±0.05 4.00 ±0.05 4.00±0.10 2.00±0.05 1.50+0.10 1.20 ±0.20 CS75 2.50±0.20 8.30±0.20 16.0±0.30 1.75±0.10 7.8±0.05 4.00±0.05 4.00±0.10 2.00±0.05 1.50+0.10 1.20 ±0.20 8 Revision: 30-pr-2015
REVISION HISORY REVISION DE CHNGE NOIFICION DESCRIPION Version D1 Jun 03,2014 - - Electrical Specifications updated - CS25 Pad Layout updated - Environmental Characteristics updated Version D2 pr 30,2015 - - Increase Product Size 0612 9 Revision: 30-pr-2015