File No:GEB-602030-USA030 Specification For Approval 客 户 承 认 书 Model:GEB602030 Customer( 客 户 名 称 ): CDI Customer P/N( 客 户 料 号 ): Revision( 版 本 ): 1.00 Date( 日 期 ): 2014-11-10 Comment: 意 见 : Customer approval/date: 客 户 承 认 / 日 期 : Cell prepared by( 电 芯 制 定 ) Cell checked by( 电 芯 审 核 ) Proj. checked by( 审 核 ) 杨 权 吴 国 吴 富 Pack Prepared by(pack 制 定 )Pack checked by(pack 审 核 ) Approved by( 批 准 ) 朱 云 罗 文 吴 富
AMENDMENT RECORDS 规 格 变 更 记 录 Revision Description Reason for revision Date Approval 版 本 描 述 变 更 原 因 日 期 批 准 1.00 初 版 发 行 2014-11-10 吴 富 File No: GEB602030-USA030 Revision: 1.00 Page : 2 / 15
Content 目 录 1.Scope 适 用 范 围 ------------------------------------------------------------------------------------------------------4 2. Battery configuration 电 池 ----------------------------------------------------------------------------------------4 2.1 Description 描 述 ------------------------------------------------------------------------------------------------4 2.2 Model 型 号 -------------------------------------------------------------------------------------------------------4 2.3 Main BOM 电 池 主 要 物 料 -------------------------------------------------------------------------------------5 2.4 Specifications of battery 电 池 规 格 -------------------------------------------------------------------------5 2.5 Packaging, Storage and Transportation 包 装 储 存 及 运 输 -----------------------------------------6 2.6 Use Attentions 使 用 注 意 事 项 --------------------------------------------------------------------------------7 2.7 Note 备 注 ---------------------------------------------------------------------------------------------------------9 3. Component Specification 组 件 规 格 ----------------------------------------------------------------------------10 3.1 Cell Model 电 芯 规 格 -------------------------------------------------------------------------------------------10 3.2 Specifications of cell 电 芯 规 格 ------------------------------------------------------------------------------11 3.3 Cell Performance Criteria 电 芯 性 能 检 查 及 测 试 ---------------------------------------------------------12 Appendix1 PCM parameter 附 件 一 保 护 板 参 数 -------------------------------------------------------------14 File No: GEB602030-USA030 Revision: 1.00 Page : 3 / 15
1 Scope 适 用 范 围 This document describes the Product Specification of the Lithium-Polymer (LIP) rechargeable battery cell supplied by General Electronics Battery Co., Ltd. 本 规 格 说 明 书 描 述 了 深 圳 市 中 美 通 用 电 池 有 限 公 司 ( 以 下 简 称 中 美 通 用 ) 生 产 的 可 充 电 聚 合 物 锂 离 子 电 池 的 产 品 性 能 指 标 2 Battery configuration 电 池 2.1 Description 描 述 Rechargeable Lithium-ion Polymer Battery 聚 合 物 电 池 2.2 Model 型 号 GEB602030 红 线 (P+) 黑 线 (P-) -GEB602030P 3.7V 300mAh +Made in China Fig.(1)The Dimension of Battery 图 (1) 成 品 电 池 外 形 尺 寸 图 Item 项 目 Description 描 述 Dimension and SPEC 尺 寸 说 明 T Thickness 电 池 厚 度 (max) 6.20mm W Width 电 池 宽 度 (max) 20.5mm H Height 电 池 高 度 (max) 32.5mm -- Pack Weight 电 池 重 量 Approx: 7.50g L Wire Length 导 线 长 度 30±3mm File No: GEB602030-USA030 Revision: 1.00 Page : 4 / 15
L1 Stripping length 剥 线 长 度 -- 2.3 Main BOM 电 池 主 要 物 料 No. Item 项 目 Qty 数 量 Specification 规 格 1 Cell 电 芯 1 Li-ion polymer cell 602030(please check the section3) 聚 合 物 电 池 602030( 见 第 3 章 节 ) 2 PCM 保 护 板 1 GEB1636 SEIKO Plate 精 工 板 3 Wire/connector 线 材 / 连 接 器 1 UL1571-AWG26#,MOLEX51021-2P 2.4 Specifications of battery 电 池 规 格 No. Items 项 目 Specifications 产 品 规 格 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Charge voltage 充 电 电 压 Nominal voltage 标 称 电 压 Nominal capacity 标 称 容 量 Minimal capacity 最 小 容 量 Pack Initial Internal Impedance 电 池 组 内 阻 Charge current 充 电 电 流 Standard Charge 标 准 充 电 Standard Discharge 标 准 放 电 Charging time 充 电 时 间 Max. charge current 最 大 充 电 电 流 Max. discharge current 最 大 放 电 电 流 Discharge cut-off voltage 放 电 截 止 电 压 Charge temperature 充 电 温 度 Discharge temperature 放 电 温 度 15 Temperature range for storage 储 存 温 度 范 围 4.2V 3.7V 300mAh 0.2C Discharge(0.2C 放 电 ) 300mAh 0.2C Discharge(0.2C 放 电 ) 260mΩ Standard Charging:: 0.2 C 标 准 充 电 : 0.2 C Rapid charge:1.0 C 快 速 充 电 1.0 C 0.2C constant current charge to 4.2V,then constant voltage 4.2V charge till charged current declines to 0.01C 0.2 C 恒 流 充 电 至 4.2V, 再 恒 压 4.2V 充 电 直 至 截 止 电 流 0.01C 0.2C constant current discharge to 3.0V 0.2C 放 电 至 3.0V Standard Charging: 6.0 hours (Ref.) 标 准 充 电 : 6.0 小 时 ( 参 考 值 ) Rapid charge:1.5-2.5 hours (Ref.) 快 速 充 电 :1.5-2.5 小 时 ( 参 考 值 ) 1.0 C 1.0 C 3.0V 0 ~ + 45-20~ +55 less than 1 month 一 个 月 以 内 less than 3 month 三 个 月 以 内 -10~+55-10~+40 File No: GEB602030-USA030 Revision: 1.00 Page : 5 / 15
less than 1 year 一 年 以 内 0~+25 2.5 Packaging, Storage and Transportation 包 装 储 存 及 运 输 2.5.1 Packaging model 包 装 示 例 : X2 Fig.(3) 图 3 2.5.2 Storage 储 存 : The Li-ion battery pack should be stored in a cool, dry and well-ventilated area, and should be far from the fire and the high temperature. 锂 离 子 电 池 需 保 存 在 阴 凉, 干 燥, 通 风 的 环 境 中, 避 免 接 触 火 源 与 热 源 The battery should store in the product specification book stipulation temperature range, the best storage temp. is 25±5. The best humidity is 60±15%. 电 池 需 按 规 格 书 规 定 温 度 范 围 进 行 储 存, 最 佳 储 存 温 度 为 25±5, 最 佳 湿 度 为 <70% The battery should be stored within room temperature, and charged to 40%~60% electric quantity(3.85v). In order to avoid over-discharge, we suggest charge and discharge the batteries every three months. Then charge to 40%~60% electric quantity(3.85v). 电 池 应 当 在 室 温 下 存 放, 应 充 到 40% 至 60% 的 电 量 (3.85V) 为 防 止 电 池 过 放, 建 议 每 3 个 月 按 标 准 充 放 电 电 方 式 进 行 一 次 充 电, 然 后 按 标 准 充 电 方 式 进 行 充 电 至 40%~60% 的 电 量 (3.85V) 2.5.3 Transportation 运 输 File No: GEB602030-USA030 Revision: 1.00 Page : 6 / 15
Do not mix the battery products with other cargos. 请 勿 与 其 他 货 物 混 合 Do not immerse the battery products in water or allow it to get wet. 请 勿 将 电 池 浸 入 水 中 或 使 其 受 潮 Do not over 7 layers staking and upside-down. 请 勿 叠 放 超 过 7 层 或 倒 置 The highest temperature in transportation is lower than 65. 最 高 运 输 温 度 不 超 过 65 2.6 Use Attentions 使 用 注 意 事 项 To ensure proper use of the battery please read the manual carefully before using it. 为 确 保 电 池 正 确 使 用, 请 在 使 用 之 前 阅 读 使 用 说 明 书 2.6.1 Warnings 警 告 : Do not expose to, dispose of the battery in fire. 不 可 将 电 池 置 于 火 中 Do not put the battery in a charger or equipment with wrong terminals connected. 不 可 将 电 池 充 电 器 正 负 极 反 接 Avoid shorting the battery. 不 可 将 电 池 短 路 Avoid excessive physical shock or vibration. 避 免 电 池 过 度 冲 击 和 震 荡 Do not disassemble or deform the battery. 不 可 拆 解 或 扭 曲 电 池 Do not immerse in water. 不 可 浸 入 水 中 Do not use the battery mixed with other different type or model batteries. 不 可 将 该 电 池 与 其 他 种 类 和 型 号 的 电 池 混 用 Keep out of the reach of children. 请 置 于 儿 童 接 触 不 到 的 地 方 File No: GEB602030-USA030 Revision: 1.00 Page : 7 / 15
2.6.2 Charge 充 电 : Battery must be charged in appropriate charger only. 请 使 用 合 适 的 充 电 器 对 电 池 充 电 Never use a modified or damaged charger.. 请 勿 用 返 修 或 损 坏 过 的 充 电 器 充 电 Do not leave battery in charger over 24 hours. 请 勿 对 电 池 充 电 24h 以 上 Charging current: Can not surpass the biggest charging current which in this specification book stipulated. 不 可 使 用 超 出 本 规 格 书 最 大 充 电 电 流 对 电 池 进 行 充 电 Charging voltage: Does not have to surpass the highest amount which in this specification book stipulated to decide the voltage. 充 电 电 压 : 请 不 要 超 出 本 规 格 书 所 规 定 最 高 充 电 电 压 Charge temperature: The battery must carry on the charge in the ambient temperature scope which this specification book stipulated. 充 电 温 度 : 电 池 需 在 指 定 温 度 范 围 内 进 行 充 放 电 Uses constant current and constant voltage way charge. PLS connect the positive and negative terminals in right way, or the battery may be damaged. 请 使 用 恒 流 恒 压 方 式 进 行 充 电 请 勿 反 接 正 负 极, 以 免 损 坏 电 池 2.6.3 Discharge 放 电 he discharging current should not surpass the biggest discharging current this specification book stipulation, The large discharge current can cause heat and lower capacity. 放 电 电 流 不 可 超 过 规 格 书 最 大 额 定 放 电 放 电 电 流 大 电 流 会 导 致 电 池 发 热 和 容 量 降 低 Discharge temperature: The battery discharge must carry on in the ambient temperature scope which this specification book stipulated. 放 电 温 度 : 电 池 必 须 在 规 格 书 规 定 温 度 范 围 内 放 电 Over-discharge: After short time over discharge, then charge immediately won t damage the battery. But the battery will be damaged for being long time over discharged. During long-term storage, the battery may be within over-discharging condition for self discharge. To prevent the occurrence of over discharging, the battery should maintain the certain capacity when storage. File No: GEB602030-USA030 Revision: 1.00 Page : 8 / 15
过 放 电 : 电 池 瞬 间 过 放 然 后 立 即 充 电 不 会 损 坏 电 池 但 是 如 果 长 时 间 过 放, 电 池 将 会 被 损 坏 在 长 期 储 存 中, 可 能 由 于 电 池 自 放 电 而 导 致 电 池 处 于 过 放 状 态 因 此 为 避 免 电 池 过 放, 必 须 带 电 储 存 2.6.4 Handling of Cell 电 池 操 作 注 意 事 项 Soft Aluminium foil 铝 箔 软 包 Don t strike battery with any sharp edge parts 勿 用 尖 锐 处 撞 击 电 池 Trim your nail or wear glove before taking battery 剪 掉 指 甲, 或 者 戴 手 套 Clean worktable to make sure no any sharp particle 清 理 工 作 台, 避 免 尖 锐 零 部 件 Sealed edge may be damaged by heat above 100 C, bend or fold sealed edge. 封 边 被 加 热 到 100 C 以 上 以 及 弯 折 封 边 都 容 易 使 封 边 受 损 2.6.5 Disposal 处 理 措 施 Regulations vary for different countries. Dispose of in accordance with local regulations. 不 同 国 家 有 不 同 规 定, 请 按 当 地 规 定 进 行 处 理 2.6.6 Period of Warranty 保 质 期 The period of warranty is 12 month from the date of shipment. Guarantees to give a replacement in case of cells with defects proven due to manufacturing process instead of the customers abuse and misuse. 电 池 的 保 质 期 从 出 货 之 日 算 起 为 12 个 月 如 果 证 明 电 池 的 缺 陷 是 在 制 造 过 程 中 形 成 的 而 不 是 由 于 用 户 滥 用 及 错 误 使 用 造 成, 本 公 司 负 责 退 换 电 池 2.7 Note 备 注 Any other items which are not covered in this specification shall be agreed by both parties. 规 格 书 所 未 包 含 的 其 它 条 款 由 双 方 协 议 解 决 If the specific data or related contents you require have not shown on our datasheet, please write them in the blank of customer'comments on the datasheet cover then give feedback to our company in writing.tks. 如 贵 司 有 需 要 明 确 的 参 数 或 相 关 的 内 容, 而 本 规 格 书 中 又 未 涉 及 到, 请 在 封 面 的 客 户 意 见 中 写 出 并 书 面 反 馈 至 我 司 File No: GEB602030-USA030 Revision: 1.00 Page : 9 / 15
Items 项 目 Description 描 述 Dimension and Spec 尺 寸 规 格 3 Component Specification 组 件 规 格 3.1 Cell Model 电 芯 规 格 L2 B L1 L3 A L T T Thickness 厚 度 6.20mm max W File No: GEB602030-USA030 Revision: 1.00 Page : 10 / 15
W Width 宽 度 20.5 mm max L Length 长 度 30.50 mm max SPECIFICATION FOR APPROVAL Fig. cell A Sealant Length 极 耳 胶 外 露 0.2~2.0mm B Tab width 极 耳 宽 度 2±0.1mm L1 Margins 边 距 6±1.0mm L2 Margins 边 距 14±1.0mm L3 极 耳 中 心 距 8±1.5mm (3)The Dimension of 图 (3) 电 芯 外 形 尺 寸 图 3.2 Specifications of cell 电 芯 规 格 No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Items 项 目 Charge voltage 充 电 电 压 Nominal voltage 标 称 电 压 Nominal capacity 标 称 容 量 Charge current 充 电 电 流 Standard Charge 标 准 充 电 Standard Discharge 标 准 放 电 Charging time 充 电 时 间 Max. charge current 最 大 充 电 电 流 Max. discharge current 最 大 放 电 电 流 Discharge cut-off voltage 放 电 截 止 电 压 Charge temperature 充 电 温 度 Discharge temperature 放 电 温 度 Temperature range for storage 储 存 温 度 范 围 Cell Weight 电 芯 重 量 4.2V 3.7V Specifications 产 品 规 格 300mAh 0.2 C Discharge 300mAh 0.2 C 放 电 Standard Charging 标 准 充 电 : 0.2 C Rapid charge 快 速 充 电 :1.0 C 0.2C constant current charge to 4.2V,then constant voltage 4.2V charge till charged current declines to 0.01C 0.2 C 恒 流 充 电 至 4.2V, 再 恒 压 4.2V 充 电 直 至 截 止 电 流 0.01C 0.2C constant current discharge to 3.0V 0.2C 放 电 至 3.0V Standard Charging 标 准 充 电 : 6.0 hours (Ref.) Rapid charge 快 速 充 电 :1.5-2.5 hours (Ref.) 1.0 C 1.0 C 3.0V 0 ~ + 45-20~ +55 less than 1 month 一 个 月 以 内 less than 3 month 三 个 月 以 内 less than 1 year 一 年 以 内 Approx 约 :6.0g -10~+55-10~+40 0~+25 File No: GEB602030-USA030 Revision: 1.00 Page : 11 / 15
3.3 Cell Performance Criteria 电 芯 性 能 检 查 及 测 试 3.3.1 Electrical Characteristics 电 性 能 No. Items 项 目 Test Method and Condition 测 试 方 法 和 条 件 Criteria 标 准 Charging the cell initially with constant current at 0.2 C and 1 Standard Charge then with constant voltage at 4.2V till charge current declines to 0.01 C 标 准 充 电 方 式 先 用 0.2 C 恒 流 充 电 至 4.2V, 再 恒 压 4.2V 充 电 直 至 充 电 电 流 -- 0.01 C First Discharge The capacity means the first discharge capacity of the cell, which is measured with discharge current of 0.2 C with 3.0V cut-off 2 Capacity 标 称 容 量 after standard charge. 该 容 量 是 指 标 准 充 电 后,0.2C 放 电 至 3.0V 截 止 所 放 出 的 容 量 300mAh Initial impedance of cell 电 池 初 始 内 阻 Internal resistance measured at AC 1KHz after 50% charge, at25. 在 25 环 境 中, 半 充 状 态 下, 测 量 其 AC 1KHz 下 的 交 流 阻 抗 Test condition: Charge: 0.2 C to 4.2V Discharge: 0.2 C to3.0v 80% or more of 1 st cycle capacity at 0.2C discharge of Operation 测 试 条 件 : 充 电 :0.2 C 充 电 到 4.2V 放 电 :0.2 C 放 电 到 3.0V 当 放 电 容 量 降 至 初 始 容 量 的 80% 时, 所 完 成 的 循 环 次 数 定 义 为 该 电 池 的 循 环 寿 命 3 120mΩ 4 Cycle Life 循 环 寿 命 300 周 (laps) 3.3.2 Environment Characteristics 环 境 性 能 After the standard charging, storied the cells under the condition 25.0±5.0 (Temperature) 75.0%RH(Humidity)for28 days, then measured the capacity with 0.2 C till 3.0Vwith previous standard discharge capacity of the ratio 标 准 充 电 后, 在 25 ±5 ( 温 度 ) 75%RH( 湿 度 ) 条 件 下 贮 存 28 天, 再 以 0.2 C 放 电 至 3.0V 所 放 出 的 容 量 与 前 次 标 准 放 电 容 量 的 比 值 1. According to item3.3.1, at 25±5. 2.Capacity comparison at each temperature, measured with constant discharge current 0.2 C with 3.0V cut-off. Percentage as an index of the capacity compared with 100% at 25 1. 在 25±5 条 件 下, 用 3.3.1 方 法 将 电 池 充 电 2. 在 不 同 温 度 条 件 下, 用 0.2 C 的 电 流 恒 流 放 电 至 截 止 电 压 3.0V 以 25 时 放 电 容 量 为 基 准 计 算 百 分 比 1 2 3 Self-discharge 荷 电 保 持 能 力 及 恢 复 容 量 Temperature Characteristics 温 度 特 性 Constant humidity and temperature 恒 定 湿 热 After standard charging, laying the battery 48h at 40±2, RH 93±2%. Recording 1C discharging time 电 池 标 准 充 电 后 在 40±2, 相 对 湿 度 93±2% 环 境 中 放 置 48h, 用 1C 放 电 至 截 止 电 压 3.0V, 记 录 电 池 放 电 时 间 Residual capacity >90% 剩 余 容 量 >90% -10 : 60% 25 : 100% 55 : 85% No distortion No electrolytes leakage 不 变 形 不 漏 液, 放 电 时 间 36min File No: GEB602030-USA030 Revision: 1.00 Page : 12 / 15
After standard charging, fixed the cell to vibration table and subjected to vibration cycling that the frequency is to be varied at 4 Vibration Test 振 动 测 试 the rate of 1Hz per minute between 10Hz and 55Hz, the excursion of the vibration is 1.6mm.The cell shall be vibrated for 30 minutes per axis of XYZ axes. 将 标 准 充 电 后 的 电 池 固 定 在 振 动 台 上, 沿 X Y Z 三 个 方 向 各 振 动 30 分 钟, 振 幅 1.6 mm, 振 动 频 率 为 10Hz~55Hz, 每 分 钟 变 化 为 1Hz No leakage 无 泄 漏 No fire 不 起 火 5 Drop Test 跌 落 测 试 The cell is to be dropped from a height of meter twice onto concrete ground. 将 标 准 充 电 后 的 电 池 从 1 米 高 度 跌 落 至 混 凝 土 地 面 2 次 No fire, no leakage. 无 起 火 无 泄 漏 3.3.3 Safety Characteristics 安 全 性 能 No. Item 项 目 Test Methods and Condition 测 试 方 法 和 条 件 Criteria 标 准 At 20±5, charging batteries with constant current 1C to voltage 4.8V, then with constant voltage 4.8V till current decline to 0A. Stop test till 1 Over charge testing 过 充 测 试 batteries temperature 10 lower than max temperature. 在 20±5 状 态 下, 电 芯 用 1C 电 流 充 电 至 4.8V, 然 后 恒 压 4.8V 让 电 流 下 降 接 近 0A, 监 视 电 池 温 度 变 化, 当 电 池 温 度 下 降 一 峰 值 低 约 10 时, 停 止 实 验. No fire or explosion 不 起 火, 不 爆 炸 At 20±5, After standard charging, connect batteries anode and cathode by wire which 2 Short-circuit testing 短 路 测 试 impedance less than 50mΩ, Stop test till batteries temperature 10 lower than max temperature. 在 20±5 状 态 下, 标 准 充 电 后, 将 电 芯 的 正 负 极 用 一 根 小 于 50mΩ 的 导 线 连 接, 监 视 电 芯 温 度 变 化, 当 电 池 温 度 下 降 到 比 峰 值 低 约 10, 结 束 试 验. No fire or explosion. 不 起 火, 不 爆 炸 Put the Cell in a circulating air oven, at a rate of (5 3 Heating 热 冲 击 ±2 ) per minute to 130,and then placed fou 30 cminute at 130. 电 池 放 置 于 热 箱 中, 温 度 以 (5 ±2 ) / 分 钟 的 频 率 加 热 到 130 并 保 持 30 分 钟 No explosion, no fire; 不 爆 炸, 不 起 火 ; 3.3.4 Note 测 试 备 注 3.3.4.1 Visual inspection 外 观 检 查 There shall be no such defect as scratch, flaw, crack, and leakage, which may adversely affect commercial File No: GEB602030-USA030 Revision: 1.00 Page : 13 / 15
value of the cell. 不 允 许 有 任 何 影 响 电 池 性 能 的 外 观 缺 陷, 诸 如 裂 纹 裂 缝 泄 漏 等 3.3.4.2 Standard environmental test condition 标 准 测 试 环 境 Unless otherwise specified, all tests stated in this Product Specification are conducted at below condition: Temperature: 25.0±5.0 Humidity: 75.0%RH 除 非 特 别 说 明, 本 标 准 书 中 所 有 测 试 均 在 以 下 环 境 条 件 下 进 行 : 温 度 :25.0±5.0 湿 度 : 75.0%RH 3.3.4.3 Above testing of safe characteristic must be with protective equipment. 安 全 性 能 测 试 应 在 有 保 护 措 施 下 进 行 Appendix1 PCM parameter 保 护 板 参 数 1. Parameter 参 数 Item 项 目 Symbol 符 号 Content 详 细 内 容 Criteria 标 准 Over charge Protection 过 充 保 护 Over discharge 过 放 保 护 Over current protection 过 流 保 护 V DET1 tv DET1 V REL1 V DET2 tv DET2 V REL2 V DET3 I DP tv DET3 Over charge detection voltage 过 充 电 检 测 电 压 Over charge detection delay time 过 充 电 检 测 延 迟 时 间 Over charge release voltage 过 充 电 解 除 电 压 Over discharge detection voltage 过 放 电 检 测 电 压 Over discharge detection delay time 过 放 电 检 测 延 迟 时 间 Over discharge release voltage 过 放 电 解 除 电 压 Over current detection voltage 过 电 流 检 测 电 压 Over current detection current 过 电 流 保 护 电 流 Detection delay time 检 测 延 迟 时 间 Release condition 保 护 解 除 条 件 Detection condition 保 护 条 件 4.28V±0.035V 1.4s(MAX) 4.08±0.1V 3.0V±0.08V 173ms(MAX) Charging to 3.0V lifted above 充 电 至 3.0V 以 上 解 除 MIN:1.2A 80mV±15mV MAX:2.8A 11ms(MAX) Cut load 断 开 负 载 Exterior short circuit 外 部 电 路 短 路 Short protection 短 路 保 护 T SHORT Detection delay time 检 测 延 迟 时 间 Release condition 保 护 解 除 条 件 0.5ms(MAX) Cut short circuit 断 开 短 路 电 路 File No: GEB602030-USA030 Revision: 1.00 Page : 14 / 15
Interior resistance 内 阻 R DS Main loop electrify resistance(battery Vol=3.9V) 主 回 路 通 态 电 阻 ( 电 池 电 压 =3.9V) B- 至 P- B - to P- R DS 60mΩ Current consumption 消 耗 电 流 I DD Current consume in normal operation 工 作 时 电 路 内 部 消 耗 MIN:0.3μA MAX:8.0μA Battery Vo1=0V charge 向 0V 电 池 充 电 的 功 能 / YES 允 许 2. Application Schematic 应 用 原 理 图 3. PCB Dimensions PCB 板 图 纸 顶 层 Top: 底 层 Bottom: File No: GEB602030-USA030 Revision: 1.00 Page : 15 / 15