Spec. No.: R13D050MP74CEOB5.0 Issued Date: 2020-08-18 客户 : Customs 环保产品 : RoHS Compliance 无卤素东莞市安伏特电子有限公司 DONGGUAN AMPFORT ELECTRONICS CO.,LTD. 承认书 Specification for approval 抑制浪涌型负温度系数热敏电阻器品名 : Partname NTC Thermistor for Limiting Inrush Current 规格 : Model 5D-13 安规认证 : Approvals 公司 : Material Number R13D050MP74CEOB5.0 客户 : Customer Material Number 编制 Edition 制造商 Manufacturer 审核 Verified 核准 Approved 承认 Admit 客户 Customer 审核 Verified 核准 Appr ved 东莞市安伏特电子有限公司 Dongguan Ampfort Electronics Co., Ltd. 地址 : 东莞市石龙镇西湖李屋园 1 巷 1 号 ADD:No.1, Yixiang,Liwu Industrial Park,Liwuyuan Village,Xihu District, Shilong Town,Dongguan 523325,Guangdong,China TEL:0769-86293298 Http:// www.ampfort.net E-mail:sales1@ampfort.net
变更记录表 Alter Record 修订条款修订前内容修订后内容修订日期修订前修订后修订人 全部首次发行 2020-08-18 林坚澍
编码规则功率型 NTC 热敏电阻的产品编码由 19 位编码组成, 其编码规则如下 : 页次 : 第 1 页, 共 7 页 Pages:No.1of 7 pages 示例 R 1 3 D 0 5 0 M P 7 4 C E N B 2 5. 0 编码 名称 环保 标识 芯片直径形状零功率电阻精度 导线 材质 线径脚型脚距 涂装 料 印字 标识 包装 形式 引脚长度 / 切脚长度 位置 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 编码说明编码位置 编码名称 取值和含义 1 环保标识 R: 符合 RoHS 标准 2~3 芯片直径 用实际数值表示, 单位 mm 例如: 05:5mm 15:15mm 4 形状 / 类型 D: 圆形 W: 大功率型 S: 方形 采用科学表示法, 单位 Ω 如果数值包含小数点, 则用符号 R 将整数部分和小数部分隔开 例如 : 5~7 零功率电阻 050:5 10^0=5 0R7:0.7 102:10 10^2=1000 2R5:2.5 F:±1% J:±5% M:±20% 8 精度 G:±2% K:±10% H:±3% L:±15% 9 导线材质 U: 镀锡铜线 P: 镀锡铁线 单位 mm 10 线径 1:1.0 4:0.43 7:0.75 A:0.8 2:0.6 5:0.7 8:0.38 B:0.78 3:0.35 6:0.55 9:0.5 11 脚型 1: 直脚型 6: 蛙形脚 8: 前后弯 4: 短内弯 7: 外弯 单位 mm 12 脚距 A:2.5 C:7.5 X: 定制 B:5.0 D:10 13 涂装料 E: 黑色酚醛 G: 绿色硅树脂 H: 灰色硅树脂 14 印字标识 N: 三角标 X: 认证标 D: 定制 O: 中性标 15 包装形式 B: 袋装散装 R: 绑带 A: 盒装编带 16~19 切脚长度采用实际数值表示, 单位 mm 用 3 位或者 4 位编码表示 例如 :3.5 10.0 ( 可选项 ) 如果是非切脚产品, 此项编码可以省略
1. APPEARANCE 外观 1-1. Dimensions (mm) 尺寸 1-2. Marking 标志 页次 : 第 2 页, 共 7 页 Pages:No.2 of 7 pages NTC 5D-13 1-3.Coating 包封 No coating Coating 无包封 包封 Material 包封材料 Color 颜色 PF resin 酚醛树脂 Green 绿色 Silicon 硅树脂 Red 红色 Epoxy 环氧树脂 Tan 黄色 Others 其他 Black 黑色 Blue 兰色 D: 15.5 T: 7 F:7.5±1.0 d:0.75±0.06 L: 5.0±0.5 1-4. Leads 引线 Tin plated copper wire 镀锡铜线 Tin-plated steel wire 镀锡钢线 Straight 直形 Axis-formed 轴弯 In-Forming 内弯 Out-Forming 外弯 2.Parameters of Technology 主要技术参数 Rated Zero-Power Resistance 额定零功率电阻值 R25(Ω) 5 详细见附录说明 Material Constant 材料常数 B25/85(K) Max. Steady State Current 最大稳态电流 (A) 2800 详细见附录说明 5 详细见附录说明 Thermal Dissipation Constant 耗散系数 (mw/ C) 13 详细见附录说明 Thermal Time Constant 热时间常数 (s) 70 详细见附录说明 Operating Temperature Range 工作温度范围 ( C) -40 C +150 C
3. INSPECTION 检验方法 页次 : 第 3 页, 共 7 页 Pages:No.3 of 7 pages 3-1. Lot Inspection 批量检验 Sampling with IEC410 / DIN ISO 2859-1 (GB/T2828.1-2012) ; Testing with SPEC.NO.: R13D050MP74CEOB5.0 抽样方法按 IEC410/ DIN ISO 2859-1 ( GB/T2828.1-2012 ); 试验方法按 SPEC.NO.: R13D050MP74CEOB5.0 Item 指标项目 IL AQL Item 指标项目 IL AQL Appearance 外观 Ⅱ 0.65 Rated Zero-Power Resistance 额定零功率电阻 RN Ⅱ 0.65 ldering-ability 可焊性 S-2 2.5 4. STORAGE CONDITIONS 存贮环境条件 : 4-1.Temperature 温度 : -10 ~+40 4-2. Humidity 湿度 : 70%RH 4-3. Term 期限 : 6 months (First-in/ First-out 先进先出 ) Max.Steady State Current 最大稳态电流 (A) S-2 2.5 4-4. Place 地点 : Do not exposing the components to the following conditions, otherwise, it may result in deterioration of characteristics. 不要暴露在下列环境条件下, 否则将导致性能衰退或参数飘移 : 1) Corrosive gas or deoxidizing gas. 腐蚀性或易氧化气体 2) Flammable and explosive gases. 易燃易爆气体 3) Oil, water and chemical liquid. 油 水和化学溶液 4) Under the sunlight. 太阳光下 4-5. Handling after seal open: After unpacking of the minimum package, reseal it promptly or store it inside a sealed container with a drying agent. 尽量保证开口最小化, 立即重新封好, 并贮存在密封 带有干燥剂的容器中 5. WARNING 注意 警告! Do not apply the components under the following conditions, otherwise, it may result in deterioration of characteristics, destruction of components or in the worst case, to catching fire. 请不要在下列条件下使用本元件, 否则将可能导致产品性能衰退或产品损毁, 甚至引发火灾 : 1) Exceeding Imax. 超过最大工作电流 2) Exceeding rated temperature range. 超过许可工作温度范围 3) Inferior thermal dissipation (Due to badly inferior thermal dissipation, some part of the components body will become overheated and then be damaged.) 散热不良 ( 由于散热不良, 本元件可能因部分过热而导致破坏 )
页次 : 第 4 页, 共 7 页 Pages:No.4 of 7 pages 6.R/T curve 阻温曲线
Appendix 附录 页次 : 第 5 页, 共 7 页 Pages:No.5of 7 pages 1. MECHANICAL CHARACTERISTICS 机械性能 Item 指标项目 Specification 技术要求 Test Conditions & Methods 测试条件 / 方法 Dipping the NTC terminals to a depth of 15mm in a soldering 1-1. Solder-ability 可焊性 The terminals shall be uniformly tinned, and its area 95% 浸润部分上锡均匀, 上锡面积 95% bath of 235 ± 5 and to the place of 6mm far from NTC body for2-3s (See IEC68-2-20 /GB2423.28 Ta ) 将引出端沾助焊剂后, 浸入到温度为 235±5 深度为 15mm 的锡槽中锡面距 NTC 本体下端 6mm 处, 持续 2-3 秒 ( 参见 IEC68-2-20 /GB2423.28 试验 Ta) 1-2. Resistance To Soldering Heat 耐焊接热 1-3. Strength of lead terminal 引出端强度 No visible mechanical damage. ΔR/RN 20% No break out 无损坏 ΔR/RN 20% Dipping the NTC terminals to a depth of 15mm in a soldering bath of 260±5 and to the place for 6mm below from NTC body for 10 ± 1s.After recovering4-5h under 25 ± 2. The rated zero power resistance value RN' shall be measured. (See IEC68-2-20 /GB2423.28 Tb) 根据 IEC68-2-20(GB2423.28) 试验 Tb 进行试验 采用焊槽法, 将引出端沾助焊剂后, 浸入到温度为 260±5 深度为 15mm 的锡槽中, 锡面距 NTC 本体下端 6mm 处, 维持 10±1 秒. 在 25±2 条件下恢复 4-5h 后, 复测额定零功率电阻 RN'. Fasten the body and apply a force gradually to each lead until 10N and then keep for 10sec, Hold body and apply a force to each lead until 90 slowly at 5N in the direction of lead axis and then keep for 10sec, and do this in the opposite direction repeat for other terminal. After recovering 4~5h under 25±2, the rated zero power resistance value RN' shall be measured. (See IEC68-2-21/GB2423.29 Ua / Ub) 根据 IEC68-2-21(GB2423.29) 试验 U 进行试验 试验 Ua: 拉力 10N, 持续 10 S; 试验 Ub: 弯曲 90, 拉力 5N, 持续 10 S; 扭转 180, 拉力 5N, 持续 10 S 在 25±2 条件下恢复 4~5 h 后, 复测额定零功率电阻 RN'
页次 : 第 6 页, 共 7 页 Pages:No.6 of 7 pages 2.ELECTRICAL CHARACTERISTICS 电气性能 2-1.Test Conditions & Method 测试条件 / 方法 Items 指标项目 2-1-1.Rated Zero-Power Resistance 额定零功率电阻 RN ( ) 2-1-2.Thermal Dissipation Constant 热耗散系数 (mw/ C) 2-1-3.Thermal Time Constant 热时间常数 (s) Spec. 技术要求 5±20% 13 70 Test Conditions & Methods 测试条件 / 方法 Ambient temp. Range:25 ±2 (TA). Testing voltage: 1.5VDC After placing for 1~2 hours under TA, the resistance value shall be measured. 环境温度 T A: 25 ±2 测试电压 : 1.5VDC 在常温 TA 条件下, 放置 1~2 小时后测得阻值 RN The thermal dissipation constant( ) could be calculated by the ratio of a change in power dissipation( P) of the thermistor to a change in temperature( T) of the thermistor at a specified ambient temperature 在特定的环境温度下, 热耗散系数 ( ) 为热敏电 阻电功率消耗 ( P) 与本体温度变化量 ( T) 的比 值. The time( ) shall be measured within which the temperature change of NTC thermistor is reached at 63.2% of the ambient temperature change under zero power condition 热时间常数 ( ) 为在零功率条件下, 热敏电阻的 温度下降到其最初温度与最终温度之差为 63.2% 时所需要的时间 2-1-4.Material Constant 材料常数 B (K) 2800±5% B=T1T2/(T2-T1) Ln (R1/R2) R1, R2 is zero-power resistance at T1, T2 R1, R2 分别为 T1, T2 温度下的零功率电阻 T1 = 298.15K(25 C) T2 = 358.15K(85 C) 2-1-5.Max.Steady State Current 最大稳态电流 (A) 5.0A Ambient temp. Range 环境温度 :25 ±2. Testing Current 测试电流 :5.0A
页次 : 第 7 页, 共 7 页 Pages:No.7 of 7 pages 3. Reliability Test 可靠性试验 ( 周期性检测项目 ) Items 指标项目 Spec. 技术要求 Test Conditions & Methods 测试条件 / 方法 *3-1. Temp. Cycling Testing 温度循环测试 *3-2. Electrical Cycling Testing 电循环测试 *3-3.LoadLife ( Endurance ) Testing 持久性测试 *4-3. Humidity Testing 耐湿性测试 Ta:-40±5 / 30min 25±2 / 5min Tb:150 ±5 / 30min 25±2 / 5min Cycles: 5times After recovering 4~5 h under 25 ± 2, the rated zero power resistance value RN' shall be measured. 在 Ta=-40±5 和 Tb=150±5 的环境温度中各存放 30 分钟, 循环 5 次. 每次高低温循环都有在 25±2 的环境中过渡 5 分钟 样品进行温度循环测试后, 取出放置室温 (25 ±2 )4~5 小时后测量零功率电阻 RN'. Ambient temp. Range:25 ±2. Cycles: 1,000times On / Off: 1m / 5m Test Current5.0A After recovering 4~5h under 25 ± 2, the rated zero power resistance value RN' shall be measured. 环境温度 :25 ±2. 循环次数 : 1,000 次通 / 断 : 1m / 5m 测试电流 :5.0A 样品置于室温 (25±2 )4~5 小时后, 测量其零功率电阻 RN'. Ambient temp. Range:25 ±2 ;5.0A/ 1,000± 24h After recovering 4~5 h under 25 ± 2, the rated zero power resistance value RN' shall be measured. 环境温度 :25 ±2. 样品通过最大工作电流 5.0A, 1,000±24 小时后, 取出置于室温 (25±2 )4~5 小时后, 测量其零功率电阻 RN'. Ambient temp. range : 40 ±2 R.H.:93±3%, Energized time:1000±24 h After recovering 4~5 h under 25 ± 2, the rated zero power resistance value RN' shall be measured. 在温度 40±2, 相对湿度 93±3% 的环境中放置 1000±24 小时后, 取出置于室温 (25±2 ) 4~5 小时后, 测量其零功率电阻 RN'.