P/N. 920-011331-03 Edition 4 JAN.29 EZ-1100/EZ-1200/EZ-1300
FCC COMPLIANCE STATEMENT FOR AMERICAN USERS This equipment has been tested and found to comply with the limits for a CLASS A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. EMS AND EMI COMPLIANCE STATEMENT FOR EUROPEAN USERS This equipment has been tested and passed with the requirements relating to electromagnetic compatibility based on the standards EN50081-1 (EN55022 CLASS A) and EN61000-4-2/-3/-4/-5/-6/-8/-11 (IEC Teil 2,3,4). The equipment also tested and passed in accordance with the European Standard EN55022 for the both Radiated and Conducted emissions limits. EZ-1000 Serial TO WHICH THIS DECLARATION RELATES IS IN CONFORMITY WITH THE FOLLOWING STANDARDS EN55022 : 1998,CLSPR 22, Class A / EN55024 : 1998 IEC 61000-4 Serial / EN61000-3-2 : 2000 / EN 61000-3- 3 : 1995 / CRF 47, Part 15/CISPR 22 3rd Edition : 1997,Class A / ANSI C63.4 : 2001 / CNS 13438,CISPR 22(Class A) / IEC60950 3rd Edition (1999) / GB4943 : 2001 / GB9254 : 1998 / GB17625.1 : 2003 CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer s instructions. Specifications are subject to change without notice. : 類 産,,,,. C lass A,,,,. 1
1... 3 1-1....3 1-2....3 1-3....3 1-4....4 1-5....6 1-6....7 2... 8 2-1....8 2-2....9 2-3...10 2-4...11 2-5 USB...11 2-6. USB...12 2-7....13 3... 14 3-1....14 3-2....14 3-3....16 3-4....17 3-5....17 3-6....20 3-7....20 3-8. ETHERNET...22 3-9 ETHERNET...22 4. LED... 24 4-1. LED...24 4-2....24 4-3....25 4-4....25 4-5....26 4-6. /...26 4-7....27 5... 28 5-1....28 5-2....28 5-3....29 5-4....29 5-5....30 2
1 1-1. EZ-1000 (100KB). 5 (125mm) 300 OD:64mm(Max) 68 (Qlabel - III) Windows 1-2. EZ-1100 (203 DPI) EZ-1200 (203 DPI) EZ-1300 (300 DPI) 1-3., 1. 2. 110V 230V 3. 4. 5. () 6. USB 7. 8. 9. 10. 11. 12. 13. CD ( ///Driver/DLL/ ) 14. 15. / :, 3
1-4. EZ-1100 EZ-1200 EZ-1300 203 dpi (8 dot/mm) 300 dpi (12 dot/mm) / CPU 16 Bit Auto Sensor ()/() 50.8 mm(2 )/ ~ 101.6 50.8 mm(2 )/ ~ 152.4 50.8 mm(2 )/ ~ 101.6 mm mm (4 )/ mm(6 )/ (4 )/ 1727 mm(68 ) 762 mm (30 ) 25 mm(1 ) ~ 104 mm(4.10 ) 25 mm(1 )~104 mm(4.10 ) :. 125mm (5 ) : 25.4 mm (1 ) / 38.1mm(1.5 ) / 76.2mm(3 ) : 25 mm (1 ) ~ 118 mm (4.65 ) : 0.06 ~ 0.3 mm 300 M (t = 7um) 64mm(Max) 25.4 mm(1 ) 30 mm 110 mm (1.18 4.33 ). : EZPL QLabel-III ( DLL & Driver Microsoft Windows 95, 98, Me, NT 4.0, 2000 and XP ) 9 (6,8,10,12,14,18,24,3016X26 ).8 Windows (0, 90, 180, 270 degrees)8 PCX BMP, ICO WMF JPG EMF,. Code 39, Code 93, Code 128 (subset A,B,C), UCC 128, UCC/EAN-128 K-Mart, UCC/EAN- 128, UPC A / E (add on 2 & 5), I 2 of 5,I 2 of 5 with Shipping Bearer Bars, EAN 8 / 13 (add on 2 & 5), Codebar, Post NET, EAN 128, DUN 14, MaxiCode, HIBC, Plessey, Random weight, Telepen, FIM, China Postal Code, RPS 128, PDF417 & Datamatrix code,(qr code available) Serial port( ), Parallel port( ) Serial port( ), Parallel port( ), USB Baud rate 4800 ~ 38400, XON/XOFF, DSR/CTS :1MB Flash :1MB Flash 2MB DRAM 2MB DRAM LED Ready, Status : Feed LED Ready, Status : Feed 100/240VAC, 50/60 Hz () 40 F to 104 F (5 C to 40 C) -40 F to 122 F (-20 C to 50 C) 30-85%, non-condensing. Free air. 10-90%, non-condensing. Free air. CE, FCC Class A, CCC, CB, CUL, BSMI 285 mm (11.2 ) / 172mm(6.8 ) 226 mm (8.9 ) / 2.72 Kg 1M+2M+ QR code 4
5
1-5. Interface cable Pin out : IBM PC : PIN NO. FUNCTION TRANSMITTER 1 2-9 10 11 12 13 14 15 16 17 18 19-30 31 32 33 34-35 36 /Strobe Data 0-7 /Acknowledge Busy /Paper empty /Select /Auto-Linefeed N/C Signal Gnd Chasis Gnd +5V,max 500mA Signal Gnd /Initialize /Error Signal Ground N/C /Select-In host / printer host printer printer printer printer host / printer host host / printer printer host / printer : 9600 baud rate no parity 8 data bits 1 stop bit XON/XOFF protocol RTS/CTS RS232 HOUSING (9-pin to 9-pin) DB9 SOCKET DB9 PLUG --- 1 1 +5V,max 500mA RXD 2 2 TXD TXD 3 3 RXD DTR 4 4 DSR GND 5 5 GND DSR 6 6 DTR RTS 7 7 N/C CTS 8 8 RTS RI 9 9 N/C PC PRINTER NOTE: parallel port serial port 500mA. USB : Type B PIN NO. 1 2 3 4 FUNCTION USBVCC D- D+ GND 6
1-6. () 1 11 READY 21 2 12 STATUS 22 USB 3 13 FEED 23 4 14 24 5 15 25 (Option) 6 + 16 7 () 17 8 18 9 19 10 20 7
2 PVC 2-1. 1. 2. ( ) 3., 4. 5., 6. 8
2-2. 1. 2. 3. 4., 5. 9
2-3 (A) 1 (B) 1.5 (C) 3 10
2-4, SENSOR ( ), SENSOR () 2-5 USB 1. USB USB 2. USB 11
3. USB 4. USB Serial Port( ) \\ USB USB COM3 5. USB ( --QLabel lli Driver) 2-6. USB USB USB Driver Ftdiunin Continue USB 12
2-7. 1. 2. 3. 4. LED : USB Driver 13
3 3-1. 27 28 (TAP 3*8)*2, 3-2. 1. 2. ( ) 3., (27), () 4. 30mm 14
5. 6. (28) 7., ( P26 ) 8. 9., FEED 15
3-3. Stripper Installation Diagram LABEL LINER LABEL LINER 16
3-4. 29 30 (TAP 3*8)*2,, 160g/m 2 500,000, 200g/m 2 250,000 3-5. 1. 2. ( ) 3., (29), () 17
4. (29) 5. (29) : (A) (A) 6. (30) 7., 18
8. 19
3-6. 31 32 PCB *2, 3-7. 1. 2., (), 3. PCB (32) 20
3.,, (1) (2), PIN 4. 21
3.8 ETHERNET 33 Ethernet 34 35 36 (MACHINE 3*6)*2 37 (TAP 3*8)*1 ETHERNET, 3.9 ETHERNET 1. ( ) 2. 3. A ( ) () 22
4. ETHERNET (33) (35) ( ) () 5. ETHERNET,(37) 6. (34) ETHERNET : 7,, ETHERNET 23
4. LED 4-1. LED LED READY STATUS READY () STATUS READY () STATUS READY () STATUS READY () STATUS READY () STATUS READY STATUS () 1 3 3 3 3 3, 4-3, 4-5, 4-4, 4-6, 4-6 Firmware 4-2. Feed Feed Feed Feed 24 24
4-3. 1. Feed 2. ( Feed ) 3 LED READY STATUS Feed 1 F\W 串列 EZ1200 : V1.200 Serial port :96,N,8,1 DRAM 數量列 度 數量 數量 數量 數量 度, 度,, 列 度, 度,, 列 Gap sensor AD 1 DRAM installed Image buffer size : 1475K 000 FORM(S) IN MEMORY 000 GRAPHIC (S) IN MEMORY 000 FONT(S) IN MEMORY 000 ASIAN FONT(S) IN MEMORY 150K BYTES FREE MEMORY ^S6 ^H8 ^R000 ~R200 ^W100 ^Q100,3 Option : ^D0 ^O0 ^AD Gap Sensor AD : 129 162 195 (3) Code Page: 850 Command Language : EZPL 4-4. 8 8 1. Feed 2. ( Feed ) 3 LED READY STATUS Feed DUMP MODE BEGIN 3. 4. Feed OUT OF DUMP MODE () 25
4-5. ( ) ( ) 1. 2. Feed 3. ( Feed ) 3 LED READY STATUS Feed 4-6. / 1. Feed 2. ( Feed ) 3 LED READY STATUS (DT) Feed NOW IS DIRECT THERMAL(DT MODE) 3. ( Feed ) 3 LED READY STATUS (TT) Feed NOW IS THERMAL TRANSFER(TT MODE) NOW IS THERMAL TRANSFER ( TT MODE) NOW IS DIRECT THERMAL (DT MODE) 26
4.7 EZ-1200 EZ-1200/EZ-1300 LCDLED LED LED Ready Status 2 4 2 3 2 2 Auto Sensing 2 2 / / / / 2 2 Command is not recognized 2 2 Memory full ( ) 2 2 Filename can not be found ~X4 2 2 Filename is repeated 27
5 5-1. () 1. 2. 3. 4. 5. () (1) 1 (2) 5-2. 1. 2. (, ) 3., 4.,,, 28
5-3., 1. 1,B. 2. 2,A., 5-4. 1. A 2. 3mm A 3. 35mm 29
5-5. LED Error ( ) () () ~T () 0.2mm 30