193V5 www.philips.com/welcome SC 1 24 29
1....1 1.1...1 1.2...2 1.3...3 2....4 2.1...4 2.2...5 2.3...7 3....9 3.1 SmartContrast...9 3.2 Philips SmartControl Lite...9 4....15 4.1...17 5....18 6. (...19 7....24 7.1 24 7.2...26 8....29 8.1...29 8.2...30
1. 1. Philips 1.1 / 6 Philips LCD LCD 0-40C 32-95F 20-80% RH / LCD 1
1. 1.2 2
1. 1.3 - WEEE This marking on the product or on its packaging illustrates that, under European Directive 2002/96/EC governing used electrical and electronic appliances, this product may not be disposed of with normal household waste. You are responsible for disposal of this equipment through a designated waste electrical and electronic equipment collection. To determine the locations for dropping off such waste electrical and electronic, contact your local government office, the waste disposal organization that serves your household or the store at which you purchased the product. Your new monitor contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of. All redundant packing material has been omitted. We have done our utmost to make the packaging easily separable into mono materials. Please find out about the local regulations on how to dispose of your old monitor and packing from your sales representative. Taking back/recycling Information for Customers Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation innational take-back initiatives and recycling programs whenever possible, preferably in cooperation with competitors, which recycle all materials (products and related packaging material) in accordance with all Environmental Laws and taking back program with the contractor company. Your display is manufactured with high quality materials and components which can be recycled and reused. To learn more about our recycling program please visit http://www.philips.com/sites/philipsglobal/ about/sustainability/ourenvironment/ productrecyclingservices.page. 3
Register your product and get support at www.philips.com/welcome 193V5 2. 2. 2.1 1. 2. / Quick Start 3. M5193V1T H70G18C181303A Power Cable VGA Cable 4
D-SUB 2. PC 2.2 3 AC IN VGA Kensington PC 1. 2. 3. 4. 5. (OSD) (OSD)? On-Screen DisplayOSD Philips LCD i OSD 5
2. OSD 1. / OSD OSD OSD Main menu Power off Brightness 0~100 2. 3. OSD 4. 5. 3 OSD 1 6. OSD 7. Contrast Auto Language Information Exit 0~100 EnglishGermanSpanishGreek FrenchItalianHungarianDutch PortuguesePortuguês do Brazil RussianPolishSwedishFinnish TürkçeCzechUkrainianS. Chinese T.ChineseJapanessKorean 6
2. 1366 x 768 @ 60 Hz 1366 x 768 @ 60 Hz 2.3 1. 2. 1 3. 2 7
2. 100mm x 100mm - 100mm 100mm 8
3. 3. 3.1 SmartContrast LCD SmartContrast SmartContrast Wizard SmartControl Lite Wizard Plug-in Standard 3.2 Philips SmartControl Lite Phillips SmartControl Lite /RGB Windows 7 Philips! 9
3. Standard Adjust Adjust BrightnessContrast FocusPosition Resolution Cancel 10
3. Color Color RGBBlack LevelWhite PointColor Calibration Color Calibration 1. Show Me 2. Start - 6 3. Quick View/ 4. Color Cancel 5. Enable color calibration - 6. 11
3. Previous Next6 Final nextfile > Cancel Options>Preferences>- Options Preferences DDC/CI Help Options Enable Context Menu SmartControl Lite Select Preset Tune Display SmartControl Lite OnEnable Task TrayEnable context menu SmartControl Lite Help Technical Support Check for Upgrade About Exit Enable task tray menu Exit On Run at Startup SmartControl Lite SmartControl Lite Enable transparency mode (Windows 7/Vista/XP 0% Options>Input> - Options Input DDC/CIHelpOptions SmartControl Lite Enable Context Menu 12
3. Source Options>Audio> - OptionsAudio Help>Version>- Help Version DDC/ CI Help Options DDC/CI HelpOption Help>User Manual> - Help User Manual DDC/CIHelp Options Context Sensitive Menu Options> Preferences> Enable Context Menu 13
3. SmartControl Lite Program SmartControl Lite PC 3 SmartControl Lite - About Select Preset - Tune Display - SmartControl Lite SmartControl Lite EXIT SmartControl Lite Options>Preferences> Run at Startup SmartControl www.portrait.com/ dtune/phl/enu/indexsmartcontrol 5 Help - User Manual User Manual Technical Support - Check for Update - PDI About - Exit SmartControl Lite 14
4. 4. / LCD TFT-LCD LED 18.5" W (47 cm) 16:9 0.3 x 0.3 mm 200 cd/m² SmartContrast 10,000,0001 700:1 5ms 1366 x 768 @ 60Hz 90 (H) / 65 (V) @ C/R > 10 1670 56Hz -76Hz 30kHz - 83kHz srgb VGA 193V5LSB2 : OSD Kensington DDC/CI, srgb, Windows 8/ Windows 7/Vista/XP, Mac OSX, Linux -3 / +10 193V5LSB2: 13.88W14.48W 0.5W 0.5W LED / 100-240VAC, 50-60Hz 15
4. (WxHxD (WxHxD 437x338x170 mm 437x273x18 mm 2.147kg(LED) 1.940kg(LED) 3.014kg(LED) 0C 40C -20C 60C 20% 80% MTBF 30,000 (LED) ROHS EPEAT Energy Star Silverwww.epeat.net 100% CE Mark, FCC Class B, EAC, SEMKO, BSMI, cetlus, ISO9241-307 1. EPEAT Gold Sliver Philips, www.epeat.net 2. www.philips.com/support 16
4. 4.1 1366 x 768 @ 60 Hz (khz) (Hz) 31.47 720 x 400 70.09 31.47 640 x 480 59.94 35 640 x 480 66.67 37.86 640 x 480 72.81 37.5 640 x 480 75 37.88 800 x 600 60.32 46.88 800 x 600 75 48.36 1024 x 768 60 60.02 1024 x 768 75.03 44.77 1280 x 720 59.86 63.89 1280 x 1024 60.02 79.98 1280 x 1024 75.03 47.71 1366 x 768 59.79 1366 x 768 @ 60Hz 17
5. 5. PC VESA DPM 193V5LSB2: VESA LED 13.88 W 0.5W - - 0.5W 1366 x 768 50% 200 6500k 18
6. 6. Lead-free Product Lead free display promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment. Toxic substances like Lead has been eliminated and compliance with European community's stringent RoHs directive mandating restrictions on hazardous substances in electrical and electronic equipment have been adhered to in order to make Philips monitors safe to use throughout its life cycle. EPEAT (www.epeat.net) The EPEAT (Electronic Product Environmental Assessment Tool) program evaluates computer desktops, laptops, and monitors based on 51 environmental criteria developed through an extensive stakeholder consensus process supported by US EPA. EPEAT system helps purchasers in the public and private sectors evaluate, compare and select desktop computers, notebooks and monitors based on their environmental attributes. EPEAT also provides a clear and consistent set of performance criteria for the design of products, and provides an opportunity for manufacturers to secure market recognition for efforts to reduce the environmental impact of its products. Benefits of EPEAT Reduce use of primary materials Reduce use of toxic materials CE Declaration of Conformity This product is in conformity with the following standards EN60950-1:2006+A11:2009+A1:20 10+A12:2011 (Safety requirement of Information Technology Equipment). EN55022:2010 (Radio Disturbance requirement of Information Technology Equipment). EN55024:2010 (Immunity requirement of Information Technology Equipment). EN61000-3-2:2006 +A1:2009+A2:2009 (Limits for Harmonic Current Emission). EN61000-3-3:2008 (Limitation of Voltage Fluctuation and Flicker) following provisions of directives applicable. 2006/95/EC (Low Voltage Directive). 2004/108/EC (EMC Directive). 2009/125/EC (ErP Directive, EC No. 1275/2008 Implementing Directive for Standby and Off mode power consumption) and is produced by a manufacturing organization on ISO9000 level. The product also comply with the following standards ISO9241-307:2008 (Ergonomic requirement, Analysis and compliance test methods for electronic visual displays). GS EK1-2000:2011 (GS mark requirement). pren50279:1998 (Low Frequency Electric and Magnetic fields for Visual Display). MPR-II (MPR:1990:8/1990:10 Low Frequency Electric and Magnetic fields). Avoid the disposal of hazardous waste EPEATS requirement that all registered products meet ENERGY STARs energy efficiency specifications, means that these products will consume less energy throughout their life. 19
6. Energy Star Declaration (www.energystar.gov) As an ENERGY STAR Partner, we have determined that this product meets the ENERGY STAR guidelines for energy efficiency. Note We recommend you switch off the monitor when it is not in use for a long time. Federal Communications Commission (FCC) Notice (U.S. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture. THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS. FCC Declaration of Conformity Declaration of Conformity for Products Marked with FCC Logo, United States Only This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Commission Federale de la Communication (FCC Declaration) Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de class B,aux termes de l'article 15 Des règles de la FCC. Ces limites sont conçues de façon à fourir une protection raisonnable contre les interférences nuisibles dans le cadre d'une installation résidentielle. CET appareil produit, utilise et peut émettre des hyperfréquences qui, si l'appareil n'est pas installé et utilisé selon les consignes données, peuvent causer des interférences nuisibles aux communications radio. 20
6. Cependant, rien ne peut garantir l'absence d'interférences dans le cadre d'une installation particulière. Si cet appareil est la cause d'interférences nuisibles pour la réception des signaux de radio ou de télévision, ce qui peut être décelé en fermant l'équipement, puis en le remettant en fonction, l'utilisateur pourrait essayer de corriger la situation en prenant les mesures suivantes: Réorienter ou déplacer lantenne de réception. Augmenter la distance entre léquipement et le récepteur. Brancher léquipement sur un autre circuit que celui utilisé par le récepteur. Demander laide du marchand ou dun technicien chevronné en radio/télévision. Toutes modifications n'ayant pas reçu l'approbation des services compétents en matière de conformité est susceptible d'interdire à l'utilisateur l'usage du présent équipement. N'utiliser que des câbles RF armés pour les connections avec des ordinateurs ou périphériques. CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA. EN 55022 Compliance (Czech Republic Only) Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source. The phasing conductor of the room's electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A). To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which should be located near the equipment and easily accessible. A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of standards PN-93/ T-42107 and PN-89/E-06251. 21
6. North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA. Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ. BSMI Notice (Taiwan Only) Ergonomie Hinweis (nur Deutschland) Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch Röntgenstrahlen" festgelegten Vorschriften. Auf der Rückwand des Gerätes befindet sich ein Aufkleber, der auf die Unbedenklichkeit der Inbetriebnahme hinweist, da die Vorschriften über die Bauart von Störstrahlern nach Anlage III 5 Abs. 4 der Röntgenverordnung erfüllt sind. Damit Ihr Monitor immer den in der Zulassung geforderten Werten entspricht, ist darauf zu achten, daß 1. Reparaturen nur durch Fachpersonal durchgeführt werden. 2. nur original-ersatzteile verwendet werden. 3. bei Ersatz der Bildröhre nur eine bauartgleiche eingebaut wird. Aus ergonomischen Gründen wird empfohlen, die Grundfarben Blau und Rot nicht auf dunklem Untergrund zu verwenden (schlechte Lesbarkeit und erhöhte Augenbelastung bei zu geringem Zeichenkontrast wären die Folge). Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 beträgt 70dB (A) oder weniger. ACHTUNG: BEIM AUFSTELLEN DIESES GERÄTES DARAUF ACHTEN, DAß NETZSTECKER UND NETZKABELANSCHLUß LEICHT ZUGÄNGLICH SIND. 22
6. China RoHS The People's Republic of China released a regulation called "Management Methods for Controlling Pollution by Electronic Information Products" or commonly referred to as China RoHS. All products including CRT and Monitor which are produced and sold for China market have to meet China RoHS request EU Energy Label. The European Energy Label informs you on the energy efficiency class of this product. The greener the energy efficiency class of this product is the lower the energy it consumes. On the label, you can find the energy efficiency class, the average power consumption of this product in use and the average energy consumption for 1 year. Note The EU Energy Label will be ONLY applied on the models bundling with HDMI and TV tuners. 23
7 7. 7.1 TFT LCD TFT LCD 0.0004% - += - += - += 24
7. 50% 30% TFT LCD 1 3 2 1 31 0 * >15mm 3 1 5 2 2 3 0 * >15mm 5 5 1. 1 2 = 1 2. ISO 9241-307 ISO 9241-307 3. ISO9241-307 ISO13406 (ISO) 2008-11-13 25
7 7.2 www.philips.com/support / ASC Germany Siemens I&S +49 01803 386 853 0.09 United Kingdom Invec Scotland +44 0207 949 0069 Local call tariff Ireland Invec Scotland +353 01 601 1161 Local call tariff Spain Eatsa Spain +34 902 888 785 0.10 Finland A-novo +358 09 2290 1908 Local call tariff France A-novo +33 082161 1658 0.09 Greece Allman Hellas +30 00800 3122 1223 Free of charge Italy A-novo +39 840 320 041 0.08 Netherlands E Care +31 0900 0400 063 0.10 Denmark A-novo +45 3525 8761 Local call tariff Norway A-novo +47 2270 8250 Local call tariff Sweden A-novo +46 08 632 0016 Local call tariff Poland Zolter +48 0223491505 Local call tariff Austria Siemens I&S +43 0810 000206 0.07 Belgium E Care +32 078 250851 0.06 Luxembourg E Care +352 26 84 30 00 Local call tariff Portugal Eatsa Spain +351 2 1359 1440 Local call tariff Switzerland A-novo +41 02 2310 2116 Local call tariff 26
7. / ASC Belarus NA IBA +375 17 217 3386 Bulgaria NA LAN Service +359 2 960 2360 Croatia NA Renoprom +385 1 333 0974 Estonia NA FUJITSU +372 6519900 Latvia NA ServiceNet LV Ltd. +371 7460399 Lithuania NA UAB "Servicenet" +370 7400088 Romania NA Blue Ridge Intl. +40 21 2101969 Serbia & Montenegro NA Kim Tec d.o.o. +381 11 20 70 684 Slovenia NA PC H.and +386 1 530 08 24 Ukraine NA Comel +380 562320045 NA Topaz-Service Company +38 044 245 73 31 Russia NA CPS +7 (495) 645 6746 (for repair) NA CEEE Partners +7 (495) 645 3010 (for sales) Slovakia NA Datalan Service +421 2 49207155 Turkey NA Techpro +90 212 444 4 832 Czech Rep. NA Asupport 800 100 697 Hungary NA Serware +36 1 2426331 NA Profi Service +36 1 814 8080 / Brazil 0800-7254101 Vermont Argentina 0800 3330 856 4008 800 008 / ASC U.S.A. EPI-e-center Qwantech (877) 835-1838 Canada Supercom Supercom (800) 479-6696 27
7 APMEA / ASC Australia NA AGOS NETWORK PTY LTD 1300 360 386 New Zealand NA Visual Group Ltd. 0800 657447 Hong Kong / Macau NA Smart Pixels Technology Ltd. India NA REDINGTON INDIA LTD Indonesia NA PT. Gadingsari elektronika Prima Hong Kong: Tel: +852 2619 9639 Macau:Tel: (853)-0800-987 Tel: 1 800 425 6396 SMS: PHILIPS to 56677 South Korea NA Alphascan Displays, Inc. 1661 5003 Tel: 62 21 75909053, 75909056, 7511530 Malaysia NA After Market Solutions (CE) Sdn Bhd 603 7953 3370 Pakistan NA Philips Consumer Service (9221) 2737411-16 Singapore Taiwan NA PCCW Teleservices Taiwan Philips Electronics Singapore Pte Ltd (Philips Consumer Care Center) (65) 6882 3999 FETEC.CO 0800-231-099 Thailand NA Axis Computer System Co., Ltd. (662) 934-5498 South Africa NA Sylvara Technologies Pty Ltd 086 0000 888 United Arab Emirates NA AL SHAHD COMPUTER L.L.C 00971 4 2276525 Israel NA Eastronics LTD 1-800-567000 Vietnam NA FPT Service Informatic Company Ltd. Philippines NA Glee Electronics, Inc. Sri Lanka Bangladesh Nepal Cambodia NA NA NA NA no distributor and/or service provider currently Distributor: Computer Source Ltd (warranty buy-out) Distributor: Syakar Co. Ltd (warranty buy-out) Distributor: Neat Technology Pte Ltd (Singapore) (warranty buy-out) +84 8 38248007 Ho Chi Minh City +84 5113.562666 Danang City +84 5113.562666 Can tho Province (02) 633-4533 to 34, (02) 637-6559 to 60 880-2-9141747, 9127592 880-2-8128848 / 52 977-1-4222395 855-023-999992 28
8. 8. 8.1 Philips LED OFF ON LED Attention Check cable connection Philips OSD Auto OSD Phase/ Clock/ VGA PC OSD Auto OSD Phase/ Clock/ VGA AUTO VGA- OSD DVI- OSD Auto OSD Phase/Clock / VGA OSD 29
8 LCD PC OSD LED Philips 8.2 1 Cannot display this video mode 1366 x 768 @60Hz PC Windows Start Settings/Control Panel / Control Panel Display Display Setting Setting desktop area 1366 x 768 Advanced Properties 60Hz OK 2 3 PC 1366 x 768 @60Hz Philips LCD PC 2 LCD LCD 60Hz 75Hz 3.inf.icm.inf.icm.inf.icm.inf.icm 4 / Windows Display properties 5 30
8. OK Reset 6LCD? 7 LCD 8 OSD OK OSD Down Arrow ColorOK 1. Color Temperature 2 6500K 9300K 6500K warm 9300K cool 2. srgb 3. User Define 2004K 9300K 6504K 9 PC Mac PCMac Mac 10 Windows 8 / Windows 7/Vista/XP/NTMac OSX Linux 11 12 1366 x 768 @60Hz 31
2013 Koninklijke Philips Electronics N.V. Philips Philips Shield Emblem Koninklijke Philips Electronics N.V. Koninklijke Philips Electronics N.V. : M5193V1T